{ "from": 9144, "count": 72, "list": [ { "id": 2359, "title": "Trinity Impulse Relative Vigor Index", "description": "

Trinity-Impulse indicator shows market entries and periods of flat.

\r\n

V-shaped impulse shows the time to enter the market in the opposite direction. Flat-topped impulse means it is time to enter the market in the same direction.

\r\n

The classical indicator Relative Vigor Index is added to the indicator separate window for double checking with Trinity Impulse.

", "url": "https://www.mql5.com/ko/market/product/2359", "small_icon": "https://c.mql5.com/31/13/trinity-impulse-relative-vigor-index-logo-60x60-6230.png", "middle_icon": "https://c.mql5.com/31/440/trinity-impulse-relative-vigor-index-logo-140x140-1596.png", "icon": "https://c.mql5.com/31/13/trinity-impulse-relative-vigor-index-logo-200x200-5453.png", "rating": 0, "price": 50, "published": 1386937128, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2366, "title": "Bears Bulls Histogram", "description": "

The Bears Bulls Histogram indicator is based on the standard Moving Average indicator.

You have MA input parameters:

maPeriod - Moving Average period;
maMODE - Moving Average mode (0 = MODE_SMA; 1 = MODE_EMA; 2 = MODE_SMMA; 3 = MODE_LWMA);
maPRICE - Applied price (0=PRICE_CLOSE; 1=PRICE_OPEN; 2=PRICE_HIGH; 3=PRICE_LOW; 4=PRICE_MEDIAN; 5=PRICE_TYPICAL; 6=PRICE_WEIGHTED).

Green Histogram is representing an Up-trend and Red Histogram is representing a Down-trend.

", "url": "https://www.mql5.com/ko/market/product/2366", "small_icon": "https://c.mql5.com/31/13/bears-bulls-histogram-logo-60x60-1183.png", "middle_icon": "https://c.mql5.com/31/439/bears-bulls-histogram-logo-140x140-1177.png", "icon": "https://c.mql5.com/31/13/bears-bulls-histogram-logo-200x200-2591.png", "rating": 0, "price": 50, "published": 1387270217, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2503, "title": "CCI normalized", "description": "

Commodity Channel Index Technical Indicator (CCI) measures the deviation of the commodity price from its average statistical price. High values of the index point out that the price is unusually high being compared with the average one, and low values show that the price is too low. In spite of its name, the Commodity Channel Index can be applied for any financial instrument, and not only for the wares.

\r\n

There are two basic techniques of using Commodity Channel Index:

\r\n

Finding the divergences.
\r\n The divergence appears when the price reaches a new maximum, and Commodity Channel Index cannot grow above the previous maximums. This classical divergence is normally followed by the price correction.
As an indicator of overbuying/overselling.
\r\n Commodity Channel Index usually varies in the range of ±100. Values above +100 inform about overbuying state (and about a probability of correcting fall), and the values below 100 inform about the overselling state (and about a probability of correcting rise).

\r\n

Calculation
\r\n

\r\n

D = Price - SMA (TP, N)
\r\n SMA (D, N) = SUM (D, N) / N Simple Moving Average
\r\n M = SMA (D, N) * 0,015
\r\n CCI = M / D

\r\n

CCI is not an indicator ranging between fixed values and this makes comparison between different markets or time periods more difficult.
\r\n

\r\n

To resolve this problem, we normalize values within a given interval.

\r\nCCInorm= (CCIreal-CCImin)*(relMax-relMin)/(CCImax-CCImin) + relMin

General Parameters

\r\n

Symbol: Set different graphic symbol to study, for example, correlation behavior.
CCI period: The number of bars to calculate CCI.
Normalization period: Time interval, over which we calculate the normalization values.
Period smoothing: Period to calculate signal line (EMA).
TimeFrame: Provides the vision of ATR in different frames to the graph.
Maximum level: Maximum level normalized CCI (100 by default).

\r\n
\r\n

Advantages

\r\n

Reports the level of volatility in a relative way: more than yesterday, less than a month ago, etc.
Facilitates the study of volatility compared between different pairs.
Reports the level of correlation between different pairs visually.

", "url": "https://www.mql5.com/ko/market/product/2503", "small_icon": "https://c.mql5.com/31/13/cci-normalized-logo-60x60-6967.png", "middle_icon": "https://c.mql5.com/31/440/cci-normalized-logo-140x140-4259.png", "icon": "https://c.mql5.com/31/13/cci-normalized-logo-200x200-4370.png", "rating": 0, "price": 30, "published": 1389004058, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2506, "title": "R2 oscilator", "description": "

R2 (R-squared) represents the square of the correlation coefficient between current prices and deducted from the linear regression. It is the statistical measure of how well the regression line is adjusted to the actual data, and therefore it measures the strength of the prevailing trend without distinguishing between ascending and descending one.

\r\n

The R2 value varies between 0 and 1, therefore it is an oscillator of bands that can show signs of saturation (overbought / oversold). The more the value approaches zero, the weaker the trend and, conversely, the closer you approach to 1, the stronger the trend.

\r\n

For example, an R2 of 0.7 calculated over a period of 5 days means that 70% of the price movements in that interval are explained by the regression line and the remaining 30% is unexplained noise.

\r\n

Calculation

\r\n

R2(p,t)= [ Cov(p,t) / (stdDev(t) x stdDev(p)) ] Cov= covariance; stdDev= standard deviation
\r\n p= price; t= period

\r\n
\r\n

The confidence of the predictions of strength of R2 depends on the period of its calculation. Statistically their critical values for the 95% confidence are:

\r\n

       period   R2 value (95% confidence)\r\n         5        0.77 \r\n         10       0.40 \r\n         14       0.27 \r\n         20       0.20 \r\n         25       0.16 \r\n         30       0.13 \r\n         50       0.08 \r\n         60       0.06 \r\n         120      0.03

\r\n

The usefulness of this indicator increases when used with the linear regression slope indicator that reports the direction of the trend, while R2 informs us of the strength of the trend.

", "url": "https://www.mql5.com/ko/market/product/2506", "small_icon": "https://c.mql5.com/31/13/r2-oscilator-logo-60x60-9599.png", "middle_icon": "https://c.mql5.com/31/445/r2-oscilator-logo-140x140-4838.png", "icon": "https://c.mql5.com/31/13/r2-oscilator-logo-200x200-9784.png", "rating": 0, "price": 30, "published": 1389012172, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2507, "title": "LRS Lineal Regresion Slope", "description": "

If instead of giving the regression value indicator end of the regression line (LRMA), we give the value of its slope, we obtain LRS or Linear Regression Slope Indicator.

\r\n

Since the slope is positive when prices rise, zero when they are in range and negative when they are lowered, LRS provides us the data on the price trend.

\r\n

Calculation

\r\n

                      sum(XY, n) - avg(Y, n)*sum(X, n)\r\n  Y= a + mX;      m=  --------------------------------        a= avg(Y, n) - m*avg(X, n)\r\n                      sum(X2, n) - avg(X, n)*sum(X, n)

According to the above formulas, the moving average of \"Y\" values builds the LRMA indicator; the moving average of \"m\" values builds the LRS indicator.

\r\n

The usefulness of this indicator increases when it is used with the R-squared indicator that reports the strength of the trend, while LRS informs us of the positive or negative strength.

", "url": "https://www.mql5.com/ko/market/product/2507", "small_icon": "https://c.mql5.com/31/13/lrs-lineal-regresion-slope-logo-60x60-2189.png", "middle_icon": "https://c.mql5.com/31/439/lrs-lineal-regresion-slope-logo-140x140-4821.png", "icon": "https://c.mql5.com/31/13/lrs-lineal-regresion-slope-logo-200x200-1939.png", "rating": 0, "price": 30, "published": 1389094812, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2565, "title": "Moving Average Bars 5", "description": "

Moving Average Bars is a self-explanatory indicator with one input parameter: nPeriod.

\r\n

When the previous Price Close is above the previous indicator Bar, the probability to go Long is very high.

\r\n

When the previous Price Close is under the previous indicator Bar, the probability to go Short is very high.

", "url": "https://www.mql5.com/ko/market/product/2565", "small_icon": "https://c.mql5.com/31/13/moving-average-bars-5-logo-60x60-6747.png", "middle_icon": "https://c.mql5.com/31/439/moving-average-bars-5-logo-140x140-2953.png", "icon": "https://c.mql5.com/31/13/moving-average-bars-5-logo-200x200-3494.png", "rating": 0, "price": 50, "published": 1389191081, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2573, "title": "Abigail 5", "description": "

Description:

\r\n

Abigail is a medium-term trading system working on the price rollback.

\r\n

The Expert Advisor has been optimized for working on EURUSD. However, it can successfully work with other currency pairs as well.

\r\n

You can examine the Expert Advisor's trading statistics for different brokers and symbols at MetaTrader 4 and MetaTrader 5 Trading Signals sections.

\r\n

Parameters:

\r\n

Risk management:

\r\n

enter volume - market entry volume. If the value is greater than 0 - number of lots, if less than 0 - percentage of available funds, if equal to 0 - entry is suspended.
portion of partial closing - partial closing (greater or equal to 1.0 - closing the entire position).
limit of number of addition - limiting the number of additions to a position.
limit step additions - setting addition steps.

\r\n

Maintaining positions:

\r\n

take_profit - number of points for setting Take Profit (0 - disabled)
stop_loss - number of points for setting Stop Loss (0 - disabled)
trailing_stop - number of points for setting TrailingStop (0 - disabled, <0 - placed according to the indicator)

\r\n

Strategy settings:

\r\n

period general
deviation general
period defining
deviation defining
period accurate
deviation accurate

\r\n

Settings of additional indicators:

\r\n

ATR period (if less than 1 - disabled)
ATR limit
RSI period (if less than 1 - disabled)
Momentum period
Momentum limit
CCI period

\r\n

Indicator for Trailing Stop (enabled only if trailing_stop is less than 0):

\r\n

Parabolic SAR step
Parabolic SAR maximum

", "url": "https://www.mql5.com/ko/market/product/2573", "small_icon": "https://c.mql5.com/31/13/abigail-52-logo-60x60-8634.png", "middle_icon": "https://c.mql5.com/31/444/abigail-5-logo-140x140-6696.png", "icon": "https://c.mql5.com/31/13/abigail-52-logo-200x200-3867.png", "rating": 0, "price": 99, "published": 1389773824, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 2582, "title": "Tick by Tick 5", "description": "

This indicator is designed for M1 timeframe and shows:

Sum of points when the price goes up (Green Histogram).
Sum of points when the price goes down (Red Histogram).

In other words, by the number and ratio of bullish points to bearish ones, you can do a technical analysis of the state of the market.

If the green histogram prevails over the red one, you can conclude that at the moment the buyers are stronger than the sellers, and vice versa, if the red histogram prevails over the green, the sellers are stronger than the buyers.

", "url": "https://www.mql5.com/ko/market/product/2582", "small_icon": "https://c.mql5.com/31/13/tick-by-tick-5-logo-60x60-3435.png", "middle_icon": "https://c.mql5.com/31/439/tick-by-tick-5-logo-140x140-4425.png", "icon": "https://c.mql5.com/31/13/tick-by-tick-5-logo-200x200-6906.png", "rating": 0, "price": 50, "published": 1389610003, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2583, "title": "Brilliant Keltner Channel", "description": "

This indicator draws the Keltner Channel using the rates chart calculated from any other timeframe.

\r\n

The available Moving Averages are:

\r\n

Simple Moving Average
Exponential Moving Average
Smoothed Moving Average
Linear Weighted Moving Average
Tillson's Moving Average

\r\n

Moving Average line is coded into RED or BLUE according to its direction from the previous candle.

\r\n

Example: User can display the Keltner Channel calculated on the basis of a Daily (D1) chart on a H4 chart.

\r\n

NOTE: Timeframe must be higher than the current timeframe of the chart, otherwise the indicator will draw nothing.

", "url": "https://www.mql5.com/ko/market/product/2583", "small_icon": "https://c.mql5.com/31/13/brilliant-keltner-channel-logo-60x60-5300.png", "middle_icon": "https://c.mql5.com/31/439/brilliant-keltner-channel-logo-140x140-2814.png", "icon": "https://c.mql5.com/31/13/brilliant-keltner-channel-logo-200x200-7476.png", "rating": 0, "price": 30, "published": 1389613637, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2599, "title": "Fibonacci Moving Bars 5", "description": "

This indicator is based on the same idea as https://www.mql5.com/en/market/product/2565, but instead of Average Bars it uses series or Fibonacci sequence.

\r\n

When the previous Price Close is above the previous indicator Bar, the probability to go Long is very high.

\r\n

When the previous Price Close is under the previous indicator Bar, the probability to go Short is very high.

", "url": "https://www.mql5.com/ko/market/product/2599", "small_icon": "https://c.mql5.com/31/13/fibonacci-moving-bars-5-logo-60x60-2514.png", "middle_icon": "https://c.mql5.com/31/439/fibonacci-moving-bars-5-logo-140x140-8067.png", "icon": "https://c.mql5.com/31/13/fibonacci-moving-bars-5-logo-200x200-3276.png", "rating": 0, "price": 50, "published": 1389620935, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2601, "title": "Fibonacci Ribbon 5", "description": "

This indicator is based on the Fibonacci sequence.

\r\n

The input parameters fiboNum is responsible for the number in the integer sequence.

\r\n

When the previous Price Close is above the ribbon, the probability to go Long is very high.

\r\n

When the previous Price Close is under the ribbon, the probability to go Short is very high.

", "url": "https://www.mql5.com/ko/market/product/2601", "small_icon": "https://c.mql5.com/31/13/fibonacci-ribbon-5-logo-60x60-6208.png", "middle_icon": "https://c.mql5.com/31/439/fibonacci-ribbon-5-logo-140x140-5904.png", "icon": "https://c.mql5.com/31/13/fibonacci-ribbon-5-logo-200x200-3922.png", "rating": 0, "price": 50, "published": 1389622220, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2605, "title": "Chart CCI 5", "description": "

This indicator is a combination of 2 classical indicators: MA and CCI.

\r\n

Two moving averages form Upper and Lower bands.

\r\n

The input parameter nPeriod is used for MA and CCI calculations.

The PaleGreen clouds characterize Up and Down trends. The moment a cloud appears above or under upper or lower bound is the time to enter the market.

", "url": "https://www.mql5.com/ko/market/product/2605", "small_icon": "https://c.mql5.com/31/14/chart-cci-5-logo-60x60-1791.png", "middle_icon": "https://c.mql5.com/31/439/chart-cci-5-logo-140x140-6199.png", "icon": "https://c.mql5.com/31/14/chart-cci-5-logo-200x200-7591.png", "rating": 0, "price": 50, "published": 1389682857, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2606, "title": "Trend Bands 5", "description": "

Bands are a form of technical analysis that traders use to plot trend lines that are two standard deviations away from the simple moving average price of a security. The goal is to help a trader know when to enter or exit a position by identifying when an asset has been overbought or oversold.

This indicator will show upper and lover bands. You can change input parameters nPeriod and nMethod to calculate those bands for each timeframe.

Aqua clouds represent up or down trends.

", "url": "https://www.mql5.com/ko/market/product/2606", "small_icon": "https://c.mql5.com/31/14/trend-bands-5-logo-60x60-5316.png", "middle_icon": "https://c.mql5.com/31/439/trend-bands-5-logo-140x140-8032.png", "icon": "https://c.mql5.com/31/14/trend-bands-5-logo-200x200-7454.png", "rating": 0, "price": 50, "published": 1389626404, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2612, "title": "Indicator for M15 TimeFrame", "description": "

This Indicator is created for a M15 time frame.

The Zero-Line means a flat market ( A flat market can refer to a trade in which the currency pair has not moved significantly up or down and, therefore, has no large gain or loss attributed to the forex trading position. Usually traders not trading when the market is flat).

The positive and negative impulses indicate the Long and Short movements accordingly.

", "url": "https://www.mql5.com/ko/market/product/2612", "small_icon": "https://c.mql5.com/31/14/indicator-for-m15-timeframe-logo-60x60-9293.png", "middle_icon": "https://c.mql5.com/31/439/indicator-for-m15-timeframe-logo-140x140-7545.png", "icon": "https://c.mql5.com/31/14/indicator-for-m15-timeframe-logo-200x200-8592.png", "rating": 0, "price": 50, "published": 1389882886, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2613, "title": "Flat Market 5", "description": "

A flat market can refer to a trade in which the currency pair has not moved significantly up or down and, therefore, has no large gain or loss attributed to the forex trading position. Usually traders not trading when the market is flat.

This is a self-explanatory indicator - do nothing when the current price in a \"cloud\".

The input parameters nPeriod and nMethod are used for calculating aqua clouds.

", "url": "https://www.mql5.com/ko/market/product/2613", "small_icon": "https://c.mql5.com/31/14/flat-market-5-logo-60x60-6410.png", "middle_icon": "https://c.mql5.com/31/439/flat-market-5-logo-140x140-1189.png", "icon": "https://c.mql5.com/31/14/flat-market-5-logo-200x200-8432.png", "rating": 0, "price": 50, "published": 1389779074, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2615, "title": "MA on MA on MA", "description": "

This indicator displays a main Moving Average line with input parameters nPeriod, nMethod and nPrice.

The second line is calculated as a Moving Average from the data of the first line, in addition it has nPeriod_2 and nMethod_2 parameters.

The third line is calculated as a Moving Average from the data of the \r\nsecond line, in addition it has nPeriod_3 and nMethod_3 parameters.

", "url": "https://www.mql5.com/ko/market/product/2615", "small_icon": "https://c.mql5.com/31/14/ma-on-ma-on-ma-logo-60x60-5522.png", "middle_icon": "https://c.mql5.com/31/440/ma-on-ma-on-ma-logo-140x140-3731.png", "icon": "https://c.mql5.com/31/14/ma-on-ma-on-ma-logo-200x200-4889.png", "rating": 0, "price": 50, "published": 1389782589, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2618, "title": "CCI Trend", "description": "

The commodity channel index (CCI) is an oscillator originally introduced by Donald Lambert in an article published in the October 1980 issue of Commodities magazine (now known as Futures magazine). Since its introduction, the indicator has grown in popularity and is now a very common tool for traders in identifying cyclical trends not only in commodities, but also equities and currencies. The CCI can be adjusted to the timeframe of the market traded on by changing the averaging period.

\r\n

This indicator is based on simple CCI, but Alert feature has been added and CCI trend has been colored.

", "url": "https://www.mql5.com/ko/market/product/2618", "small_icon": "https://c.mql5.com/31/14/cci-trend-logo-60x60-1619.png", "middle_icon": "https://c.mql5.com/31/441/cci-trend-logo-140x140-3728.png", "icon": "https://c.mql5.com/31/14/cci-trend-logo-200x200-2613.png", "rating": 0, "price": 30, "published": 1389784489, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2623, "title": "Multi Time Frame Moving Averages", "description": " In finance, a moving average (MA) is a stock indicator that is commonly used in technical analysis. The reason for calculating the moving average of a stock is to help smooth out the price data by creating a constantly updated average price.

This Indicator determines the current time frame and calculates 3 moving averages from the next 3 available time frames.

You can put this indicator on M1, M5, M15, M30, H1 and H4 TF.

Blue and Magenta Arrows show the moment to go Long or Short accordingly.

", "url": "https://www.mql5.com/ko/market/product/2623", "small_icon": "https://c.mql5.com/31/14/multi-time-frame-moving-averages-logo-60x60-5499.png", "middle_icon": "https://c.mql5.com/31/439/multi-time-frame-moving-averages-logo-140x140-5523.png", "icon": "https://c.mql5.com/31/14/multi-time-frame-moving-averages-logo-200x200-8081.png", "rating": 0, "price": 50, "published": 1389878027, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2626, "title": "Power MT5", "description": "

The indicator is based on readings of two oscillators: Bulls Power and Bears Power. It clearly shows the balance of buyers and sellers power. A signal for entering a deal is crossing the zero line and/or a divergence. When the volume filter is enabled, yellow histogram bar shows low trading volume (below average for 50 previous bars).

\r\n

Input Parameters:

\r\n

Period - calculation period, 13 on default;
CalculatedBar - number of bars for displaying a divergence, 300 on default;
Filter by volume - volume filter, false on default. If it is enabled, then the divergence signals do not appear and a histogram bar is colored in yellow in case the volume is less than the average volume for previous 50 bars. Three modes are available: False, True, Auto. In Auto mode, the filter is automatically enabled on timeframes M30 and lower; and it is disabled on timeframes greater than M30;
Display divergence alert - enables notifications of divergence, true on default;
Display cross zero alert - enables notifications of crossing a zero level, true on default;
Draw indicator trend lines - enables displaying the trend lines of the indicator during divergence, true on default;
Draw price trend lines - enables displaying the trend lines on the price chart during divergence, true on default;
Line bull divergence color - select a color for the trend line displayed during bullish divergence, Green on default;
Line bear divergence color - select a color for the trend line displayed during bearish divergence, Red on default.

\r\n

The indicator works with any currency pair and timeframe.

", "url": "https://www.mql5.com/ko/market/product/2626", "small_icon": "https://c.mql5.com/31/14/power-mt5-logo-60x60-9534.png", "middle_icon": "https://c.mql5.com/31/439/power-mt5-logo-140x140-3575.png", "icon": "https://c.mql5.com/31/14/power-mt5-logo-200x200-7431.png", "rating": 0, "price": 0, "published": 1391687913, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2641, "title": "Fibonacci Moving Averages with Buy and Sell Arrows", "description": "

Fibonacci sequence is defined by integer sequence: 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, ...

\r\n

By definition, it starts from 0 and 1, the next number is calculated as a sum of two previous numbers.

\r\n

Instead of the standard moving average, the indicator uses the following calculation of average price: Bar0 + Bar1 + Bar2 + Bar3 + Bar5 + Bar8 + Bar13 + Bar21 + ...

\r\n

Input parameters:

\r\n

fiboNum - numbers in the following integer sequence for Fibo Moving Average 1. 5 on default.
fiboNum2 - numbers in the following integer sequence Fibo Moving Average 2. 15 on default.

", "url": "https://www.mql5.com/ko/market/product/2641", "small_icon": "https://c.mql5.com/31/14/fibonacci-moving-averages-with-buy-and-sell-arrows-logo-60x60-5907.png", "middle_icon": "https://c.mql5.com/31/442/fibonacci-moving-averages-with-buy-and-sell-arrows-logo-140x140-3216.png", "icon": "https://c.mql5.com/31/14/fibonacci-moving-averages-with-buy-and-sell-arrows-logo-200x200-6854.png", "rating": 0, "price": 50, "published": 1389787493, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2658, "title": "ATR channel all MAs", "description": "

"ATR channel all MAs jm" is a indicator that allows displaying on a chart the ATR channel calculated according to the moving average selected.

\r\n

You can select 9 standard MAs available in MetaTrader 5 - SMA, EMA, \r\n SMMA, LWMA, DEMA, TEMA, Frama, VIDYA, AMA, TRIX, and 4 non-standard - \r\n LRMA, HMA, JMA, AFIRMA.

\r\n

General Parameters:

\r\n

Channel type - true: channel ATR, false: channel price.
Method MA - select the type of moving average to show in the current graph.
Period MA - the number of bars to calculate the MA.
Period ATR - period to calculate the ATR.
Width channel - the width of the channel expressed in multiples of ATR.
Applied Price - select price type (close, high, low ...).

\r\n

Advantages of Use:

\r\n

Manual traders: It has a "multipurpose knife" which facilitates analysis of trends and breakouts from a single control box in the chart.

\r\n

Automatic traders: Allows you to optimize the type of MA as another parameter of the EA by simply including "Method MA" as external parameter. A strategy can not work well with BB EMA but be profitable with BB VIDYA or AMA. If you design EAs, you should provide in your code the enumeration: {SMA=0,EMA=1,SMMA=2,LWMA=3,DEMA=4,TEMA=5,FRAMA=6,VIDYA=7,AMA=8,LRMA=9,HMA=10,JMA=11,AFIRMA=12}.

", "url": "https://www.mql5.com/ko/market/product/2658", "small_icon": "https://c.mql5.com/31/14/atr-channel-all-mas-logo-60x60-2695.png", "middle_icon": "https://c.mql5.com/31/441/atr-channel-all-mas-logo-140x140-3210.png", "icon": "https://c.mql5.com/31/14/atr-channel-all-mas-logo-200x200-8090.png", "rating": 0, "price": 30, "published": 1389972142, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2679, "title": "Correlation Analyzer", "description": "

This script analyzes all symbols in Market Watch for a set timeframe. The result is displayed on the Experts tab and in the specified file. For \r\nmore convenient viewing and editing, the result is displayed in a csv file.

\r\n

For the calculation, the Pearson formula is used.

\r\n

The value of the correlation coefficient of pairs close to 1 means that the pairs move almost identically. A value close to -1 means that the \r\npairs move in the same way.

\r\n

This tool will be useful to those who use hedging due to the movement of other pairs.

\r\n

Parameters:

\r\n

glubanal - Depth analysis in bars

\r\n

InpFileName - output file name

\r\n

InpDirectoryName - output directory

\r\n

precision - increased accuracy (using OHLC instead of O), increases the accuracy of calculations, but loads the processor and \r\nnetwork more heavily for the time of calculations

\r\n

spreadmax - maximum spread for calculation

\r\n

ValuesSeparator - separator character of received values

\r\n

ShadowFinder - the number of bars to determine the lagging / leading shadow. At negative values it will mean that the shadow \r\nshould be ahead of the main pair.

\r\n

AverageMethod - averaging methods for calculating the correspondence according to the Pearson formula

", "url": "https://www.mql5.com/ko/market/product/2679", "small_icon": "https://c.mql5.com/31/14/correlation-analyzer-logo-60x60-1426.png", "middle_icon": "https://c.mql5.com/31/441/correlation-analyzer-logo-140x140-4144.png", "icon": "https://c.mql5.com/31/14/correlation-analyzer-logo-200x200-5562.png", "rating": 0, "price": 0, "published": 1390821024, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 2698, "title": "Kolier SuperTrend MTF", "description": "

This is HTF (or MTF) of original Kolier SuperTrend indicator.

\r\n

On this version, you can use 4 Lines of supertrend to define the trend, it will be more powerful.

\r\n

Remade signals on smalls timeframes, the indicator will not repaint if used on small timeframes.

", "url": "https://www.mql5.com/ko/market/product/2698", "small_icon": "https://c.mql5.com/31/14/kolier-supertrend-mtf-logo-60x60-8677.png", "middle_icon": "https://c.mql5.com/31/439/kolier-supertrend-mtf-logo-140x140-1751.png", "icon": "https://c.mql5.com/31/14/kolier-supertrend-mtf-logo-200x200-4334.png", "rating": 0, "price": 30, "published": 1390820448, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2747, "title": "Tick by Tick plus Indicator by choice", "description": "

This indicator is designed for M1 time frame and shows:

Sum of points when the price goes up (Green Histogram).
Sum of points when the price goes down (Red Histogram).

In other words, by the number and ratio of bullish points to bearish ones, you can do a technical analysis of the state of the market.

Indicator CCI, RVI, Force or Trinity Impulse could be added to the indicator separate window by your choice.

", "url": "https://www.mql5.com/ko/market/product/2747", "small_icon": "https://c.mql5.com/31/14/tick-by-tick-plus-indicator-by-choice-logo-60x60-5159.png", "middle_icon": "https://c.mql5.com/31/439/tick-by-tick-plus-indicator-by-choice-logo-140x140-6485.png", "icon": "https://c.mql5.com/31/14/tick-by-tick-plus-indicator-by-choice-logo-200x200-6140.png", "rating": 0, "price": 40, "published": 1390826421, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3028, "title": "Moving Above Average MT5", "description": "

A moving average is commonly used with time series data to smooth out\r\n short-term fluctuations and determine longer-term trends. The proposed \r\nindicator has an ability to increasing a smooth-effect.

\r\n

This indicator could play an important role in determining support and resistance.

\r\n

An input parameter nPeriod determines number of Bars for Moving AboveAverage calculation.

", "url": "https://www.mql5.com/ko/market/product/3028", "small_icon": "https://c.mql5.com/31/17/moving-above-average-mq5-logo-60x60-2974.png", "middle_icon": "https://c.mql5.com/31/440/moving-above-average-mt5-logo-140x140-8325.png", "icon": "https://c.mql5.com/31/17/moving-above-average-mq5-logo-200x200-7520.png", "rating": 0, "price": 50, "published": 1392649675, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3044, "title": "Vertical Histogram Volume", "url": "https://www.mql5.com/ko/market/product/3044", "small_icon": "https://c.mql5.com/31/368/vertical-histogram-volume-logo-60x60-5535.png", "middle_icon": "https://c.mql5.com/31/439/vertical-histogram-volume-logo-140x140-2771.png", "icon": "https://c.mql5.com/31/368/vertical-histogram-volume-logo-200x200-7675.png", "rating": 0, "price": 50, "published": 1570728365, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3185, "title": "Moving Above Envelopes MT5", "description": "

This indicator is based on the classical Envelopes indicator.

\r\n

The proposed indicator has the ability to increase a smooth-effect in the Envelopes Indicator.

\r\n

This indicator could play an important role in determining support and resistance.

\r\n

nPeriod input parameter determines the number of Bars for Moving Above Envelopes calculation.

", "url": "https://www.mql5.com/ko/market/product/3185", "small_icon": "https://c.mql5.com/31/18/moving-above-envelopes-mt5-logo-60x60-8687.png", "middle_icon": "https://c.mql5.com/31/440/moving-above-envelopes-mt5-logo-140x140-6102.png", "icon": "https://c.mql5.com/31/18/moving-above-envelopes-mt5-logo-200x200-8810.png", "rating": 0, "price": 50, "published": 1394021030, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3262, "title": "Four Bands", "description": "

Optimistic trader may enter the market when the price crosses the Aqua line.

More reliable entry will be when the price crosses the Blue line.

When the price comes back and crosses the Red line you can open a position in the course of price movements.

", "url": "https://www.mql5.com/ko/market/product/3262", "small_icon": "https://c.mql5.com/31/19/four-bands-logo-60x60-5415.png", "middle_icon": "https://c.mql5.com/31/439/four-bands-logo-140x140-4688.png", "icon": "https://c.mql5.com/31/19/four-bands-logo-200x200-3879.png", "rating": 0, "price": 50, "published": 1394534276, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3304, "title": "Pair Trading Station MT5", "description": "

How to use Pair Trading Station

Pair Trading Station is recommended for H1 time frame and you can use it for any currency pairs. To generate buy and sell signal, follow few steps below to apply Pair Trading Station to your MetaTrader terminal.

When you load Pair Trading Station on your chart, Pair Trading station will assess available historical data in your MetaTrader platforms for each currency pair. On your chart, the amount of historical data available will be displayed for each currency pair at the beginning for your information. The minimum condition for calculation of Pair trading statistics really depends on available historical data. For example, for EURUSD and GBPUSD, MetaTrader Terminal must have matching historical data to calculate pair trading statistics for these pairs. When there is not enough historical data, you can do few things. Firstly you might open charts for that currency pairs and MetaTrader may load some of historical data. Secondly you might use Historical data centre to load the historical data manually.
Secondly, you need to decide the correlation level for Pair Trading Station to generate trading signals. Higher correlation level will give you more accurate trading signal but you might get fewer trading signals. Based on our experience, the correlation must be greater 0.7.
Once you have set the amount of bars to be used in the calculation and the correlation level, it is time to ask your Pair Trading Station to go through intensive calculation to generate trading signals. Just click “Analyze Pair” button to proceed the calculation. The calculation may take from 30 seconds to several minutes. The calculation time mainly depend on two factor including amount of bars to be used and the number of currency pairs in your market watch. If you have already calculated Pair trading statistics quite lately, then you don’t have to go through the intensive calculation again because Pair Trading Station keeps the latest Pair Trading Statistics. To load the latest Pair Trading Statistics, you just need to press “Ctrl”+ J key on your keyboard.

Must Read and Follow

Keep the right amount of symbols in your market watch. Otherwise, it can overload your cpu and memory. Start with 8 important symbols first in market watch, then gradually increase the numbers as you understand the process.

Many traders are not aware of how much historical data is loaded in your charts. In default setting, normally short historical data, pre-set by your broker, is loaded on your charts. To quickly increase historical data in your charts for many currency pairs, in the history centre, you can just download H1 historical data only for fast processing. Once the pair trading statistics is calculated and saved, you don’t have to worry about if your brokers overwrite or delete your historical data because Pair Trading Station will carry on generating signals using the saved information.

Input Variable Description

Bars to scan for calculation: To calculate pair trading statistics, you need to specify how much historical data you are going to use in the calculation. Check the currency pairs with smallest and largest historical data to get some idea of how much historical data is available in your MetaTrader terminal. Then choose good amount of data to calculate pair trading statistics.
Minimum Bars to qualify for calculation: Pair Trading Station will skip calculation if currency pair have less than minimum bars
Minimum Factor to qualify for signal: normally signal is qualified from factor 2 as in z score of standard deviation
Correlation Limit to match pairs: If correlation is too low, then Pair Trading Station will skip the calculation.
Lines Per Column when signal is displayed: This variable will specify how many lines of signal to be displayed per column in your chart
Colour for Medium Strength Signal: Control colour for medium strength signal
Colour for High Strength Signal: Control colour for high strength signal
Colour for Extreme Strength Signal: Control colour for extreme strength signal

Important Note

This product is the off the shelf product in the store. Therefore, we do not take any personal modification or personal customization request. For our products, we do not provide any code library or any support for your coding.

", "url": "https://www.mql5.com/ko/market/product/3304", "small_icon": "https://c.mql5.com/31/262/pair-trading-station-mt5-logo-60x60-2485.png", "middle_icon": "https://c.mql5.com/31/446/pair-trading-station-mt5-logo-140x140-2425.png", "icon": "https://c.mql5.com/31/262/pair-trading-station-mt5-logo-200x200-4805.png", "rating": 4, "price": 280, "published": 1438620794, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 3373, "title": "High And Low MT5", "description": "

On the current chart, this indicator displays candlestick highs and lows of another time frame.

\r\n

Input Parameters:

\r\n

TimeFrame - chart time frame whose data will be displayed on the current price chart (by default, H12).
Time Zone - shift of the indicator by time zone relative to the broker's time (by default, Broker-1).

\r\n

If the broker's time zone is UTC+1 and the Time Zone parameter is set to Broker-1, the bends of the indicator will be plotted in multiples of Greenwich Time.

\r\n

Indicator buffer values:

\r\n

Candlestick highs.
Candlestick lows.

", "url": "https://www.mql5.com/ko/market/product/3373", "small_icon": "https://c.mql5.com/31/21/high-and-low-logo-60x60-8189.png", "middle_icon": "https://c.mql5.com/31/440/high-and-low-mt5-logo-140x140-2128.png", "icon": "https://c.mql5.com/31/21/high-and-low-logo-200x200-8629.png", "rating": 0, "price": 30, "published": 1395834249, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3442, "title": "Alligator Steps MT5", "description": "

This indicator is based on the classical Alligator indicator which is a trend trading indicator.

Stay in the trade as long as the candlesticks ride above or below the Alligator. When the lines converge or cross, it is time to consider entering or exiting

The proposed indicator has the ability to increase a smooth-effect in Alligator Indicator.

This indicator could play an important role in determining support and resistance.

", "url": "https://www.mql5.com/ko/market/product/3442", "small_icon": "https://c.mql5.com/31/20/alligator-steps-mt5-logo-60x60-2269.png", "middle_icon": "https://c.mql5.com/31/438/alligator-steps-mt5-logo-140x140-4199.png", "icon": "https://c.mql5.com/31/20/alligator-steps-mt5-logo-200x200-9649.png", "rating": 0, "price": 50, "published": 1395047539, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3608, "title": "Fibonacci Waves MT5", "description": "

The Fibonacci series. This number sequence is formed as each subsequent number is a sum of the previous two.

it turns out that it refers to its neighbors in the ratio 0.618 and 1.618

The most commonly used method for measuring and forecasting the length of the price movement is along the last wave, which ended in the opposite direction

The Fibonacci Waves indicator could be used by traders to determine areas where they will wish to take profits in the next leg of an Up or Down trend.

", "url": "https://www.mql5.com/ko/market/product/3608", "small_icon": "https://c.mql5.com/31/21/fibonacci-waves-mt5-logo-60x60-3552.png", "middle_icon": "https://c.mql5.com/31/446/fibonacci-waves-mt5-logo-140x140-8212.png", "icon": "https://c.mql5.com/31/21/fibonacci-waves-mt5-logo-200x200-7030.png", "rating": 0, "price": 40, "published": 1395397557, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3831, "title": "Angle DeMarker MT5", "description": "

The indicator shows the angle of the DeMarker indicator line, which allows you to identify possible price extrema more accurately. Histogram bar color and size indicate the direction and angle of the DeMarker line. When the trade volume control is enabled, a yellow bar is an indication of the volume being lower than average over the past 50 bars. The color of the main indicator line shows whether the price has reached an overbought/oversold level in accordance with DeMarker indicator values. There are three kinds of signals: zero line crossover, main line color change and divergence.

\r\n

Input Parameters:

\r\n

Period - calculation period, by default 14;
Smooth - smoothing, by default 4;
CalculatedBar - number of bars for displaying divergence, by default 300;
Filter by volume - filter by volume, by default Auto (enabled automatically on time frames lower than Н1);
Level DeMarker buy - oversold level according to DeMarker indicator values, by default 0.3;
Level DeMarker sell - overbought level according to DeMarker indicator values, by default 0.7;
Display divergence alert - enables divergence alert, by default true;
Display cross zero alert - enables zero line crossover alert, by default true;
Draw indicator trend lines - enables indicator trend lines in divergence, by default true;
Draw price trend lines - enables trend lines on the price chart in divergence, by default true;
Line bull divergence color - color of the trend line in bullish divergence, by default Green;
Line bear divergence color - color of the trend line in bearish divergence, by default Red.

\r\n

Currency pair - any. Time frame - any. The recommended calculation period for М15 and lower time frames is 24.

\r\n

", "url": "https://www.mql5.com/ko/market/product/3831", "small_icon": "https://c.mql5.com/31/23/angle-demarker-mt5-logo-60x60-8637.png", "middle_icon": "https://c.mql5.com/31/447/angle-demarker-mt5-logo-140x140-7274.png", "icon": "https://c.mql5.com/31/23/angle-demarker-mt5-logo-200x200-3134.png", "rating": 0, "price": 0, "published": 1396524310, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3834, "title": "Pairs Trading Candle Chart", "description": "

The indicator is designed for visual multicurrency analysis. It allows synchronous scrolling and analysis of a few charts simultaneously.

\r\n

The product can also be used for pairs trading. The indicator works both on Forex and Russian FORTS market. The product has a very important property - if there are skipped bars at the symbols, the synchronism of charts on the time axis is fully preserved.

\r\n

Each chart point is strictly synchronous with the others on the time axis at any time frame. This is especially true in the stock market, as well as for low-liquidity symbols.

\r\n

Price display method is colored candles.

\r\n

The following values are displayed:

\r\n

Open prices/High/Low/Close - as a colored candle. The default colors are as follows: red candle - the price is falling (Close value is less than Open one), green candle - the price is rising (Close value exceeds Open one), yellow candle - the price is equal to the previous one (Close value is equal to Open one), gray candle - the price corresponds to the missing bar.
Price levels - as horizontal dashed lines. They are often used as support/resistance levels.
\r\n
Current Bid/Ask/Last prices - as horizontal lines. Display, color and line style are specified by a user.

\r\n

External parameters:

\r\n

Hedge Instrument Name - name of the symbol to be displayed on the chart that is synchronous to the main one. For example, \"GBPUSD\" (of course, quotation marks should be omitted when specifying a name).
Instrument Show Name - name that should be displayed in the indicator window. You can use a custom name for an instrument as its original name can be too long and contain unnecessary information. If this field is left empty, the instrument name will be used.
Show on Chart, days - limits the number of days displayed as a chart. Specified number of displayed days does not depend on the chart's timeframe.
\r\n
Show Levels - show/hide price levels. If Yes, price levels are displayed on the chart.
Levels Step Size, points - distance between adjacent levels in points - it is usually set as multiple of 500 (the distance multiple of 400 points is often used for JPY pairs). Also, additional levels for a specified step are displayed.
\r\n
Up & Down Round Levels Number - number of displayed price levels above and below the current price. If set to 4, the level closest to the current price (4 below and 4 above) is displayed.
Levels Line Color - color of the lines displaying price levels.
Levels Line Style - style of the lines displaying price levels (solid, dashed, etc.).
Scanning Interval, msecs - period of the data update on the chart. It is set in milliseconds (the value of not less than 100 milliseconds should be set).
Chart Color Schema - indicator's color scheme. The following schemes are available: light/dark/black on white/white on black.
Show Bid Line - show/hide Bid price location on the chart as a horizontal line. Line color and style are set as individual parameters.
Show Ask Line - show/hide Ask price location on the chart as a horizontal line. Line color and style are set as individual parameters.
Show Last Line - show/hide Last price location on the chart as a horizontal line. Line color and style are set as individual parameters. This price is valid for stock symbols (for example, for Russian FORTS market).
Bid Line Style - line style for Bid price on the chart (solid, dashed, etc.).
Ask Line Style - line style for Ask price on the chart (solid, dashed, etc.).
Last Line Style - line style for Last price on the chart (solid, dashed, etc.).
Bid Line Color - line style for Bid price on the chart.
Ask Line Color - line style for Ask price on the chart.
Last Line Color - line style for Last price on the chart.
Show Buffer's Value on Chart - show/hide display of numerical values for indicator buffers in the indicator window.
Debug Info Level manages sending messages to the terminal's log on the errors occurring when symbol data is received. Sending is disabled by default.

\r\n

Fig. 1 displays the indicator working with Forex symbols. This example shows the convenience of the multicurrency analysis based on various trading strategies (for example, Elder's Triple Screen, seasonal trends, etc.), as well as the development of new strategies depending on the trader's preferences.

\r\n

Fig. 2 shows similar example for Russian FORTS market.

\r\n

Below is the offer for active users and all those who keeps reading to this line.
\r\n

\r\n

If you have any interesting ideas for improving this or any other product I offer, then you'll get a big discount for any of my products (or even get it for free) if the idea is realized.
\r\n
\r\n Please write all your suggestions on the Comments tab, so we can have a documentary proof of the ideas and see who the first author is.

", "url": "https://www.mql5.com/ko/market/product/3834", "small_icon": "https://c.mql5.com/31/23/pairs-trading-candle-chart-logo-60x60-1560.png", "middle_icon": "https://c.mql5.com/31/446/pairs-trading-candle-chart-logo-140x140-8219.png", "icon": "https://c.mql5.com/31/23/pairs-trading-candle-chart-logo-200x200-6324.png", "rating": 0, "price": 30, "published": 1396446443, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 3946, "title": "Levels on Chart", "description": "

The indicator draws lines that can serve as support/resistance levels. They work both on Forex and FORTS. The main and additional levels are displayed as lines, with the color and style defined by the user. Additional levels are only displayed for currency pairs without JPY.

\r\n

Please see the AUDUSD chart below. Yellow ovals indicate some characteristic points where price reaches one of the levels.

\r\n

The second screenshot shows a FORTS instrument chart with the characteristic points.

\r\n

Simply watch the indicator work on history and in real time mode.

\r\n

External parameters:

\r\n

Levels Step Size, points - step between adjacent levels in points - it is usually set as multiple of 500 (or 400 for currency pairs with JPY).
Up & Down Levels Number - number of price levels displayed above and below the current price. If set to 4, the indicator displays the level closest to the price (4 below and 4 above).
Levels Line Color - color of the main levels.
Levels Line Style - style of the main levels.
Adding Levels Line Color - color of the additional levels.
Adding Levels Line Style - style of the additional levels.

\r\n

Below is the offer for active users and all of you who has read to this line:
If you have an interesting idea for improvement of this or any of my other products, then in case of implementation, the author of the idea will get a generous discount on any of my products.
Please share your suggestions in the product's Comments section to allow for documenting and determining the original author of any given idea.

", "url": "https://www.mql5.com/ko/market/product/3946", "small_icon": "https://c.mql5.com/31/24/levels-on-chart-logo-60x60-3161.png", "middle_icon": "https://c.mql5.com/31/440/levels-on-chart-logo-140x140-3913.png", "icon": "https://c.mql5.com/31/24/levels-on-chart-logo-200x200-6150.png", "rating": 0, "price": 30, "published": 1397484369, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4017, "title": "Price River MT5", "description": "

The indicator creates 2 dot lines representing an upper and lower bands and the main indicator aqua line as the price power.

\r\n

If the main line is swimming inside the bands, then you should wait and watch before entering the market.

\r\n

When the main line jumps out or in the bands, then you should make a long or a short position.

", "url": "https://www.mql5.com/ko/market/product/4017", "small_icon": "https://c.mql5.com/31/24/price-river-mt5-logo-60x60-4479.png", "middle_icon": "https://c.mql5.com/31/446/price-river-mt5-logo-140x140-9288.png", "icon": "https://c.mql5.com/31/24/price-river-mt5-logo-200x200-1954.png", "rating": 0, "price": 40, "published": 1397564043, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4132, "title": "FORTS Open Interest", "description": "

This is an open interest indicator for the Russian FORTS futures market. Now, you can receive data on the open interest in real time in МТ5 terminal. This allows you to develop brand new trading strategies or considerably improve the existing ones.

\r\n

The data on the open interest is received from the database (text CSV or binary one at user's discretion). Thus, upon completion of a trading session and disabling the terminal (or PC), the data is saved and uploaded to the chart when the terminal is re-launched.

\r\n

You can use FORTS All Saver or any other utility that saves data in the same format to receive the open interest database.

\r\n

Open interest value is displayed as candles, where Open is the value at the beginning of the current timeframe's bar, High/Low - high/low value and Close - the value at the moment the bar is closed (and a new one is opened). The minimum allowable timeframe is М1 (one minute). Thus, you can see the changes of the open interest inside the bar and examine its dynamics in comparison with the neighboring bars.

\r\n

Parameters

\r\n

\r\n
Use CSV-file: Yes - the history is taken from a CSV file; No - the history is taken \r\nfrom a binary file. Naturally, the file must be available in the \r\nterminal directory.
\r\n
\r\n
Use Common Directory: Yes - use common directory to store history database (for all terminals); No - each МТ5 terminal installed in the system saves data in its own directory: \"MQL5/Files/OpenInterest\".
\r\n
\r\n
File Name Prefix - prefix for forming the file name. The file name is formed from the prefix, symbol name and extension (CSV or BIN). For example: \"OpenInterest-GAZR-6.14.CSV\". If an empty line is set as a prefix, the default 'OpenInterest' prefix is used.
\r\n
\r\n
History Show Period - history period displayed on the chart. It can be set from one day (trading day) to one year and does not depend on the chart's timeframe. Of course, the history should be physically present in the user PC's appropriate directory.
\r\n
\r\n
Chart Color Schema - indicator's color scheme. It can be selected from the list - dark colors, light colors, white on black and black on white.
\r\n
\r\n
Show Values on Chart - show/hide the current Open/High/Low/Close values as digits in the indicator window.
\r\n

\r\n

Proposal for interested users:

\r\n

If you have ideas for improvement of this or any of my other products, please write me. You will get a big discount for any of my products if the idea is realized.

\r\n

Please write all your suggestions on the Comments tab of this page, so we can have a documentary proof of the ideas and see who the first author is.

", "url": "https://www.mql5.com/ko/market/product/4132", "small_icon": "https://c.mql5.com/31/35/forts-open-interest-logo-60x60-9339.png", "middle_icon": "https://c.mql5.com/31/440/forts-open-interest-logo-140x140-7866.png", "icon": "https://c.mql5.com/31/35/forts-open-interest-logo-200x200-2407.png", "rating": 0, "price": 48, "published": 1408619554, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4240, "title": "Support Resistance Fibonacci MT5", "description": "

The concepts of trading level support and resistance one of the most highly discussed attributes of technical analysis. Part of analyzing chart patterns, these terms are used by traders to refer to price levels on charts that tend to act as barriers, preventing the price of an asset from getting pushed in a certain direction.

This indicator will draw the Support and Resistance lines calculated on the nBars distance.

If input parameter Fibo = true then the Fibonacci lines will appear between those lines.

", "url": "https://www.mql5.com/ko/market/product/4240", "small_icon": "https://c.mql5.com/31/26/support-resistance-fibonacci-mt5-logo-60x60-6898.png", "middle_icon": "https://c.mql5.com/31/447/support-resistance-fibonacci-mt5-logo-140x140-9119.png", "icon": "https://c.mql5.com/31/26/support-resistance-fibonacci-mt5-logo-200x200-9483.png", "rating": 0, "price": 40, "published": 1398867366, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4254, "title": "PositionGuard MT5", "description": "

This indicator is intended to guard your open position at any time frame and currency pair.

\r\n

Long position

\r\n

In case the current price goes above the Take Profit price or below the Stop Loss price of the opened position and the Dealing Desk does not close this position, the indicator creates an Excel file with the name:

\r\n

Buy-TP_Symbol_Date_PositionID.csv or Buy-SL_Symbol_Date_PositionID.csv

\r\n

which will be placed in the folder: C:\\Program Files\\ ........\\MQL5\\Files

\r\n

Excel file for Buy-TP: You will have a first line of data with a Date, Time (HH:MM:SS) when a Bid price is greater than Take Profit.
Excel file for Buy-SL: You will have a first line of data with a Time (HH:MM:SS) when a Bid price is lesser than Stop Loss.

\r\n

Short position

\r\n

In case the current price goes below the Take Profit price or above the Stop Loss price of the opened position and the Dealing Desk does not close this position, the indicator creates an Excel file with the name:

\r\n

SELL-TP_Symbol_Date_PositionID.csv or Buy-SL_Symbol_Date_PositionID.csv

\r\n

which will be placed in the folder: C:\\Program Files\\ ........\\MQL5\\Files

\r\n

Excel file for SELL-TP: You will have a first line of data with a Date, Time (HH:MM:SS) when an Ask price is lesser than Take Profit.
Excel file for SELL-SL: You will have a first line of data with a Date, Time (HH:MM:SS) when a Bid price is greater than Stop Loss.

\r\n

With this system, you will always have the right data to speak with your Dealer.

", "url": "https://www.mql5.com/ko/market/product/4254", "small_icon": "https://c.mql5.com/31/26/positionguard-mt5-logo-60x60-3369.png", "middle_icon": "https://c.mql5.com/31/441/positionguard-mt5-logo-140x140-4625.png", "icon": "https://c.mql5.com/31/26/positionguard-mt5-logo-200x200-6778.png", "rating": 0, "price": 40, "published": 1399370313, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4262, "title": "New Age Indicator MT5", "description": "

Self Explanatory Indicator: buy when the Aqua line crossing the Yellow line upward and Sell when the Aqua line crossing the Yellow line downwards.

\r\n

Input parameters:

\r\n

Period1 = 13.
Method1 = 2. MODE_SMA=0, MODE_EMA=1, MODE_SMMA=2, MODE_LWMA=3.
Period2 = 5.
Method2 = 0. MODE_SMA=0, MODE_EMA=1, MODE_SMMA=2, MODE_LWMA=3.

", "url": "https://www.mql5.com/ko/market/product/4262", "small_icon": "https://c.mql5.com/31/26/new-age-indicator-mt5-logo-60x60-7515.png", "middle_icon": "https://c.mql5.com/31/445/new-age-indicator-mt5-logo-140x140-4013.png", "icon": "https://c.mql5.com/31/26/new-age-indicator-mt5-logo-200x200-3615.png", "rating": 0, "price": 40, "published": 1399627709, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4269, "title": "Tick Hour Tick MT5", "description": "

This indicator is designed for H1 timeframe and shows:

Sum of points when the price goes up (Green Histogram).
Sum of points when the price goes down (Red Histogram).

In other words, by the number and ratio of bullish points to bearish ones, you can do a technical analysis of the state of the market.

", "url": "https://www.mql5.com/ko/market/product/4269", "small_icon": "https://c.mql5.com/31/26/tick-hour-tick-mt5-logo-60x60-8485.png", "middle_icon": "https://c.mql5.com/31/446/tick-hour-tick-mt5-logo-140x140-8789.png", "icon": "https://c.mql5.com/31/26/tick-hour-tick-mt5-logo-200x200-2445.png", "rating": 0, "price": 40, "published": 1399475112, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4285, "title": "Silver Clouds MT5", "description": "

Indicator Cloud is drawing \"clouds\" on the chart.

\r\n

If the current price is behind the cloud then no actions should be done.

\r\n

If the current price departs from the cloud then one should consider to go Long or Short according to the price movement.

\r\n

Input parameters: Period1 and Method1 could be used as indicator settings for each TimeFrame and Currency pairs.

", "url": "https://www.mql5.com/ko/market/product/4285", "small_icon": "https://c.mql5.com/31/26/silver-clouds-mt5-logo-60x60-6391.png", "middle_icon": "https://c.mql5.com/31/446/silver-clouds-mt5-logo-140x140-2733.png", "icon": "https://c.mql5.com/31/26/silver-clouds-mt5-logo-200x200-5354.png", "rating": 0, "price": 40, "published": 1400058064, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4361, "title": "Best Price Finder", "description": "

This script allows you to compare quotes and spreads from different trading servers or brokers to identify a server/broker that offers the best bid/ask price and the tightest spread.

It can be compared with up to six different servers or brokers at a time, and it is easy to find the best quote provider by score.

Usage: Open up to 6 MetaTrader client terminals, login to different servers/brokers, and then start the script on each terminal's chart.

", "url": "https://www.mql5.com/ko/market/product/4361", "small_icon": "https://c.mql5.com/31/26/best-price-finder-logo-60x60-2052.png", "middle_icon": "https://c.mql5.com/31/445/best-price-finder-logo-140x140-2318.png", "icon": "https://c.mql5.com/31/26/best-price-finder-logo-200x200-9519.png", "rating": 0, "price": 32, "published": 1400241435, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 4427, "title": "Trapezoidal Support and Resistance MT5", "description": "

\"Support\" and \"Resistance\" levels - points at which an exchange rate trend may be interrupted and reversed - are widely used for short-term exchange rate forecasting.

\r\n

One can use this indicator as Buy/Sell signals when the current price goes above or beyond Resistance/ Support levels respectively and as a StopLoss value for the opened position.

", "url": "https://www.mql5.com/ko/market/product/4427", "small_icon": "https://c.mql5.com/31/27/trapezoidal-support-and-resistan-logo-60x60-4053.png", "middle_icon": "https://c.mql5.com/31/439/trapezoidal-support-and-resistance-mt5-logo-140x140-1960.png", "icon": "https://c.mql5.com/31/27/trapezoidal-support-and-resistan-logo-200x200-9190.png", "rating": 0, "price": 40, "published": 1401708303, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4450, "title": "Pine Trees MT5", "description": "

Trend is the direction that prices are moving in, based on where they have been in the past. Trends are made up of peaks and troughs. It is the direction of those peaks and troughs that constitute a market's trend. Whether those peaks and troughs are moving up, down, or sideways indicates the direction of the trend.

The indicator PineTrees is sensitive enough (one has to use input parameter nPeriod) to show UP (green line) and DOWN (red line) trend.

", "url": "https://www.mql5.com/ko/market/product/4450", "small_icon": "https://c.mql5.com/31/27/pine-trees-mt5-logo-60x60-2119.png", "middle_icon": "https://c.mql5.com/31/440/pine-trees-mt5-logo-140x140-1697.png", "icon": "https://c.mql5.com/31/27/pine-trees-mt5-logo-200x200-3065.png", "rating": 0, "price": 40, "published": 1403601159, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4465, "title": "Moving Envelopes MT5", "description": "

Optimistic trader may enter the market when the price crosses the blue line.

\r\n

More reliable entry will be when the price crosses the yellow line.

\r\n

When the price comes back and crosses the red line you can open a position in the course of price movements.

\r\n

If the price is moving between aqua lines - stay out of the market.

", "url": "https://www.mql5.com/ko/market/product/4465", "small_icon": "https://c.mql5.com/31/27/moving-envelopes-mt5-logo-60x60-8149.png", "middle_icon": "https://c.mql5.com/31/439/moving-envelopes-mt5-logo-140x140-8886.png", "icon": "https://c.mql5.com/31/27/moving-envelopes-mt5-logo-200x200-1888.png", "rating": 0, "price": 40, "published": 1402910556, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4494, "title": "Auto Close Timer Ultimate", "description": "

AutoCloseTimer allows you to close positions and delete pending orders at a specified time.

\r\n

Usage

\r\n

Download and drag and drop AutoCloseTimer onto the chart.
Check Allow AutoTrading in Common tab.
Set parameters in Inputs tab. Notice: The close time must be later than the current market time.

\r\n

Input Parameters

\r\n

CloseSymbol - there are 2 options

SymBol Of Chart - just close the symbol of the current chart
\r\n
All Symbols - close all symbols

CloseTimerDay - specify a day for AutoCloseTimer. The default value is Today

Today - specify today to close positions and delete pending orders
Immediately - AutoCloseTimer will close positions and delete pending orders immediately
Day\r\n of the Week - specify a day from Sunday to Saturday. If the specified \r\n day is past in this week, it will be delayed in the next week
Day of the Month - specify a day from 1st to 31st. If the specified day is past in this month., it will be delayed to the next month

CloseTimerHour - specify hour from 00 to 23 for AutoCloseTimer. The default value is 23
CloseTimerMinute - specify minute from 00 to 59 for AutoCloseTimer. The default value is 30
ClosePosition - there are 4 options, and you can combine ClosePositionType parameter to complete a more complex movement

All Positions - close all positions
Only Profit Positions - just close profit positions
Only Loss Positions - just close loss positions
No - do not close any position. If this option is chosen, ClosePositionType parameter will not be available

ClosePositionType - there are 3 options, and you can combine ClosePosition parameter to complete a more complex movement

Buy & Sell - all buy and sell type positions will be closed
Only Buy Positions - just buy type positions will be closed
Only Sell Positions - just sell type positions will be closed

DeletePendingOrder - there are 4 options

All Pending Orders - delete all pending orders
Only Buy Pending Orders - just delete buy pending orders
Only Sell Pending Orders - just delete sell pending orders
No - do not delete any order

\r\n

You can try the free edition of AutoCloseTimer first: https://www.mql5.com/en/market/product/4272

", "url": "https://www.mql5.com/ko/market/product/4494", "small_icon": "https://c.mql5.com/31/27/auto-close-timer-ultimate-logo-60x60-8117.png", "middle_icon": "https://c.mql5.com/31/446/auto-close-timer-ultimate-logo-140x140-5927.png", "icon": "https://c.mql5.com/31/27/auto-close-timer-ultimate-logo-200x200-7466.png", "rating": 1, "price": 30, "published": 1401980043, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 4535, "title": "True Range Bands MT5", "description": "When the bands come close together, constricting the moving average, it is called a squeeze. A squeeze signals a period of low volatility and is considered by traders to be a potential sign of future increased volatility and possible trading opportunities. Conversely, the wider apart the bands move, the more likely the chance of a decrease in volatility and the greater the possibility of exiting a trade.

This indicator can be used at any time frames and currency pairs.

The following input parameters can be easily changed for your needs:

nPeriod = 13;
Deviation = 1.618;
MaShift = 0.

", "url": "https://www.mql5.com/ko/market/product/4535", "small_icon": "https://c.mql5.com/31/27/true-range-bands-mt5-logo-60x60-8513.png", "middle_icon": "https://c.mql5.com/31/441/true-range-bands-mt5-logo-140x140-1341.png", "icon": "https://c.mql5.com/31/27/true-range-bands-mt5-logo-200x200-2419.png", "rating": 0, "price": 40, "published": 1400776265, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4559, "title": "Trend in Colors MT5", "description": "

The three basic types of trends are up, down, and sideways. An uptrend is marked by an overall increase in price. Nothing moves straight up for\r\nlong, so there will always be oscillations, but the overall direction needs to be higher. A downtrend occurs when the price of an asset moves\r\nlower over a period of time.

\r\n

This is a separate window indicator without any input parameters.

\r\n

Green Histogram is representing an Up-Trend and Red Histogram is representing a Down-Trend.

", "url": "https://www.mql5.com/ko/market/product/4559", "small_icon": "https://c.mql5.com/31/27/trend-in-colors-mt5-logo-60x60-5032.png", "middle_icon": "https://c.mql5.com/31/438/trend-in-colors-mt5-logo-140x140-3337.png", "icon": "https://c.mql5.com/31/27/trend-in-colors-mt5-logo-200x200-1475.png", "rating": 0, "price": 30, "published": 1401129422, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4562, "title": "Fibonacci Doppler MT5", "description": "

Fibonacci Arcs in the full circles are based on the previous day's candle (High - Low).

\r\n

These arcs intersect the base line at the 23.6%, 38.2%, 50%, 61.8%, and 78.6%. Fibonacci arcs represent areas of potential support and\r\nresistance.

\r\n

Reference point - the closing price of the previous day.

\r\n

These circles will stay still all day long until the beginning of the new trading day when the indicator will automatically build a new set of the\r\nFibonacci Arcs.

", "url": "https://www.mql5.com/ko/market/product/4562", "small_icon": "https://c.mql5.com/31/28/fibonacci-doppler-mt5-logo-60x60-5095.png", "middle_icon": "https://c.mql5.com/31/445/fibonacci-doppler-mt5-logo-140x140-6209.png", "icon": "https://c.mql5.com/31/28/fibonacci-doppler-mt5-logo-200x200-2374.png", "rating": 0, "price": 30, "published": 1401129642, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4607, "title": "Support and Resistance 5 days MT5", "description": "

Support and resistance represent key junctures where the forces of supply and demand meet.

\r\n

On an interesting note, resistance levels can often turn into support areas once they have been breached.

\r\n

This indicator is calculating and drawing 5 pairs of \"Support and Resistance\" lines as \"High and Low\" from the current and 4 previous days.

", "url": "https://www.mql5.com/ko/market/product/4607", "small_icon": "https://c.mql5.com/31/28/support-and-resistance-5-days-mt-logo-60x60-9339.png", "middle_icon": "https://c.mql5.com/31/446/support-and-resistance-5-days-mt5-logo-140x140-5921.png", "icon": "https://c.mql5.com/31/28/support-and-resistance-5-days-mt-logo-200x200-7617.png", "rating": 0, "price": 40, "published": 1401467661, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4672, "title": "Bears Bulls Complex MT5", "description": "

The Bull and Bear Power indicators identify whether the buyers or sellers in the market have the power, and as such lead to price breakout in the respective directions.

Bulls Power vs. Bears Power is a unique tool that displays on each candle the balance between the bears (sellers) and the bulls (buyers).

This particular indicator will be especially very effective when the narrow histogram and the wide histogram reside on the same side (above or under the Zero line)

", "url": "https://www.mql5.com/ko/market/product/4672", "small_icon": "https://c.mql5.com/31/28/bears-bulls-complex-mt5-logo-60x60-6459.png", "middle_icon": "https://c.mql5.com/31/441/bears-bulls-complex-mt5-logo-140x140-1521.png", "icon": "https://c.mql5.com/31/28/bears-bulls-complex-mt5-logo-200x200-9702.png", "rating": 2, "price": 40, "published": 1402318059, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 4680, "title": "Bears MACD MT5", "description": "

This indicator is a visual combination of 2 classical indicators: Bears and MACD.

\r\n

Usage of this indicator could be the same as both classical indicators separately or combine.

\r\n

Input parameters:

\r\n

input int BearsPeriod = 9;
input ENUM_MA_METHOD maMethod = MODE_SMA;
input ENUM_APPLIED_PRICE maPrice = PRICE_CLOSE;
input int SignalPeriod = 5.

", "url": "https://www.mql5.com/ko/market/product/4680", "small_icon": "https://c.mql5.com/31/28/bears-macd-mt5-logo-60x60-1113.png", "middle_icon": "https://c.mql5.com/31/438/bears-macd-mt5-logo-140x140-2634.png", "icon": "https://c.mql5.com/31/28/bears-macd-mt5-logo-200x200-4444.png", "rating": 0, "price": 40, "published": 1404122806, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4681, "title": "FORTS MAX", "description": "

The reversing Expert Advisor FORTS MAX is designed specially for trading futures contracts on FORTS. Its trading algorithms are based on the original methods of price dynamics analysis and the specifics of the Russian market.

\r\n

The main feature of this EA is the use of reverse trading technique, reverting a position and taking into account the free margin. Before reverting a deal, it closes the current position, and opens a new one only after margin is released.

\r\n

The FORTS MAX Expert Advisor uses the popular classic trading tactics based on the intersection of two moving averages with different averaging periods, allowing you to use it on small timeframes for a more accurate market entry. This tactic allows you to always be in the market - it eliminates the likelihood of missing a major move in the market.

\r\n

Compared to standard EAs based on the intersection of two moving averages, it shows an excellent result for minor adjustments of input parameters.

\r\n

You can continually improve the trading result by optimizing the parameters of moving averages for the changing nature of the market. Despite the fact that the trend indicator is used, the EA can trade successfully during flat, if you set appropriate parameters of moving averages and timeframe.

", "url": "https://www.mql5.com/ko/market/product/4681", "small_icon": "https://c.mql5.com/31/28/forts-max-logo-60x60-4103.png", "middle_icon": "https://c.mql5.com/31/440/forts-max-logo-140x140-9331.png", "icon": "https://c.mql5.com/31/28/forts-max-logo-200x200-4905.png", "rating": 0, "price": 400, "published": 1402663524, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 4682, "title": "Bulls MACD MT5", "description": "

This indicator is a visual combination of 2 classical indicators: Bulls and MACD.

\r\n

Usage of this indicator could be the same as both classical indicators separately or combined.

\r\n

Input parameters:

\r\n

BearsPeriod = 9;
ENUM_MA_METHOD maMethod = MODE_SMA;
ENUM_APPLIED_PRICE maPrice = PRICE_CLOSE;
SignalPeriod = 5.

", "url": "https://www.mql5.com/ko/market/product/4682", "small_icon": "https://c.mql5.com/31/28/bulls-macd-mt5-logo-60x60-3534.png", "middle_icon": "https://c.mql5.com/31/445/bulls-macd-mt5-logo-140x140-8463.png", "icon": "https://c.mql5.com/31/28/bulls-macd-mt5-logo-200x200-8229.png", "rating": 0, "price": 40, "published": 1404736016, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4705, "title": "Trend Histogram MT5", "description": "

Trend indicators tell you which direction the market is moving in, if there is a trend at all because they tend to move between high and low values like a wave

This indicator shows Up Trend (Green Histogram), Down Trend (Red Histogram) and Sideways Trend (Yellow Histogram).

Only one input parameter: ActionLevel. This parameter depends of the length of the shown sideways trend.

", "url": "https://www.mql5.com/ko/market/product/4705", "small_icon": "https://c.mql5.com/31/29/trend-histogram-mt5-logo-60x60-3546.png", "middle_icon": "https://c.mql5.com/31/441/trend-histogram-mt5-logo-140x140-9224.png", "icon": "https://c.mql5.com/31/29/trend-histogram-mt5-logo-200x200-5472.png", "rating": 0, "price": 40, "published": 1405591200, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4726, "title": "Parabolic SAR MTF", "description": "

This is a multiple timeframe version of the classic Parabolic SAR indicator (stands for \"stop and reverse\").

\r\n

PSAR follows price being a trend following indicator. Once a downtrend reverses and starts up, PSAR follows prices like a trailing stop.

\r\n

You can choose the timeframes for displaying PSAR on the chart.

\r\n

Of course, you can see PSAR only from the current and higher timeframes.

\r\n

Input parameters:

\r\n

bM15 - PSAR from M15
bM30 - PSAR from M30
bH1 - PSAR from H1
bH4 - PSAR from H4
bD1 - PSAR from D1
bW1 - PSAR from W1
bMN1 - PSAR from MN1
Step - 0.02
Maximum - 0.2

", "url": "https://www.mql5.com/ko/market/product/4726", "small_icon": "https://c.mql5.com/31/29/parabolic-sar-mtf-logo-60x60-6832.png", "middle_icon": "https://c.mql5.com/31/438/parabolic-sar-mtf-logo-140x140-5133.png", "icon": "https://c.mql5.com/31/29/parabolic-sar-mtf-logo-200x200-3008.png", "rating": 0, "price": 30, "published": 1408439005, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4858, "title": "Price Breakout Pattern Scanner MT5", "description": "

Price Breakout pattern Scanner is the automatic scanner for traders and investors. It can detect following patterns automatically from your chart.

Head and Shoulder - Common tradable pattern.
Reverse Head and Shoulder - This pattern is the reverse formation of the Head and Shoulder.
Double Top - When the price hits resistance level twice and decline toward the support level, the trader can anticipate sudden bearish breakout through the support level.
Double Bottom - The double bottom pattern is the reverse shape of the Double Top.
Triple Top - When the price hits resistance level three times and decline toward the support level, the trader can anticipate sudden bearish breakout through the support level.
Triple Bottom - The triple top pattern is the reverse pattern of the triple top.
Triangle - Several different types of triangle pattern include symmetric Triangle, Ascending Triangle and Descending Triangle.
Rising wedge - This pattern is similar to triangle. However, their angle is stiffer than standard triangle.
Falling wedge -This pattern has similar look to triangle too. However, their angle is stiffer than standard triangle.
52 Candlestick patterns – the Price Breakout Pattern Scanner can detect 52 different bearish and bullish candlestick patterns include hanging man, shooting star, engulfing, doji, Harami, etc.

Beside this pattern detection, you can use full feature of Smart Renko indicator, automatic round number detection and guided trading instruction feature.

Main Parameter

You can use Price Breakout Pattern Scanner for many different mode. If support and resistance are important for your trading, then you can run the Price Breakout Pattern scanner in Support Resistance mode. For that, set “Display As Support Resistance” = true. If you set “Display As Support Resistance” = false, then Price Breakout pattern scanner will show patterns drawn in triangles. With Price Breakout pattern scanner, it is possible to apply them in custom timeframe. This means that you can apply several price breakout pattern scanner in one chart. To apply price breakout pattern scanner in custom timeframe, set “Timeframe to detect Price Breakout Patterns” to your preferred one including H1, H4, D1, W1 or MN1, etc.

Set false to switch off Price Breakout Pattern Scanning:
Use Renko Filter for Pattern detection : true or false only
Timeframe to detect Price Breakout Patterns
Display As Support Resistance (true = support resistance, false = triangle)
Max number of patterns to display: Control this input if you want to see more than one pattern simultaneously. For example, set this to 3, then price breakout pattern scanner will show 3 latest patterns at the same time.
Pattern Index from which to display: 0 = default
Enable sound alert: set to true to get sound alert
Send email if pattern is found: set to true to receive email alert
Send notification if pattern is found: set to true to receive push notification. Push notification is recommended over email notification.

How to apply Price Breakout pattern Scanner on multiple timeframe

You can apply Price Breakout Pattern Scanner on multiple timeframe in single chart. This will allow you to perform total geometric analysis in fully automatic manner. You can get short, medium, long terms analysis in one single chart. To apply multiple Price Breakout Pattern Scanner in one chart, you need to change the “Timeframe to detect Pattern” and “Button Coordinate Y”. If you do not change “Button Coordinate Y”, then you will not be able to control all price Breakout Pattern Scanner since some buttons will be hidden under the other buttons. For a general guidance, set Button Coordinate Y to 80 for second Price Breakout Pattern Scanner. Likewise, you can set button coordinate Y to 100 for third Price Breakout Pattern Scanner assuming that your button height is 20.

Trading Strategy Guide

Using Wedge, Triangle, Double Top, Double Bottom, Head and Shoulder and Cup with Handle patterns are documented in the link below.

https://www.mql5.com/en/blogs/post/750388

Important Note

This is the off the shelf product. Therefore, we do not accept any modification or customization request on this product. In addition, we do not provide any code library or any support for your coding for this product.

", "url": "https://www.mql5.com/ko/market/product/4858", "small_icon": "https://c.mql5.com/31/262/price-breakout-pattern-scanner-mt5-logo-60x60-4774.png", "middle_icon": "https://c.mql5.com/31/445/price-breakout-pattern-scanner-mt5-logo-140x140-1308.png", "icon": "https://c.mql5.com/31/262/price-breakout-pattern-scanner-mt5-logo-200x200-7273.png", "rating": 4, "price": 100, "published": 1403881773, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 4885, "title": "TradePad", "description": "

TradePad는 수동 및 알고리즘 트레이딩을 위한 도구입니다. 여러 거래 상품에 대한 빠른 거래 작업과 포지션 제어를 위한 간단한 솔루션을 제공합니다.

주의, 이 애플리케이션은 전략 테스터에서 작동하지 않습니다!

데모 계정을 위한 애플리케이션의 평가판과 모든 도구에 대한 설명

애플리케이션 인터페이스는 고해상도 모니터에 맞게 조정되었으며 간단하고 직관적입니다. 편안한 작업을 위해 트레이더에게 다음과 같은 도구 세트가 제공됩니다.

거래 작업 관리, 메인 차트 기간 간 전환, TradePad 상품 간 전환을 위한 핫키 관리자;

포지션을 개설하거나 보류 주문을 설정할 때 하락 위험을 평가하고 잠재적 이익을 계산하기 위한 거래 수준 표시 도구;

여러 거래 심볼을 시각적으로 모니터링하고 알고리즘 트레이딩을 위한 거래 신호를 수신하기 위한 MultiCharts 도구. 편의를 위해 거래 쌍 세트를 구성하여 여러 시간대의 가격을 모니터링하고 다중 통화 거래를 수행할 수 있습니다.

확장된 HTML 보고서를 생성하고 거래 심볼의 특성과 거래 계좌에 대한 정보를 볼 수 있는 모든 기간의 거래 통계를 볼 수 있는 정보 모듈;

보류 주문 관리를 위한 보류 주문 관리자 - 보류 주문의 단일 또는 그룹(네트워크) 설정, 주문 유형 및 단일 심볼 또는 거래 계정의 모든 유형별로 그룹 삭제;

보류 주문 Sell Stop Limit 및 Buy Stop Limit을 설정하기 위한 도구;

포지션을 관리하기 위한 포지션 관리자(계정 유형에 따라 다름) - 모든 포지션의 그룹 마감 - 수익성/비수익성, 숏/롱 또는 모두. 포지션 지원 - 트레일링 스톱 및 포지션을 손익분기점으로 이전;

무역 통계 달력;

", "url": "https://www.mql5.com/ko/market/product/4885", "small_icon": "https://c.mql5.com/31/1549/tradepad-logo-60x60-4621.png", "middle_icon": "https://c.mql5.com/31/1549/tradepad-logo-140x140-3248.png", "icon": "https://c.mql5.com/31/1549/tradepad-logo-200x200-3983.png", "rating": 5, "price": 199, "published": 1404906478, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 4911, "title": "PZ Supply Demand MT5", "description": "

Stay ahead of the market: predict buying and selling pressure with ease

This indicator analyzes past price action to anticipate buying and selling pressure in the market: it does so by looking back into the past and analyzing price peaks and valleys around the current price. It is a state-of-the-art confirmation indicator.

Predict buying and selling pressure in the market
Avoid getting caught in buying selling frenzies
No settings and no optimization needed
The indicator works in all timeframes
Extremely easy to use

Potential supply and demand prices are those at which lots of market participants are likely to be holding their losing positions, hoping to liquidate them at break-even. Thus there is massive activity at these price levels.

Both supply and demand are quantified as numbers
If supply is above demand, you can expect selling pressure
If supply is below demand, you can expect buying pressure
Look for shorts when supply is above demand
Look for longs when supply is below demand

Input Parameters

Range: Volatility multiplier around the current price to search peaks and valleys in the past.

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/ko/market/product/4911", "small_icon": "https://c.mql5.com/31/30/pz-supply-demand-mt5-logo-60x60-2934.png", "middle_icon": "https://c.mql5.com/31/447/pz-supply-demand-mt5-logo-140x140-9150.png", "icon": "https://c.mql5.com/31/30/pz-supply-demand-mt5-logo-200x200-7847.png", "rating": 0, "price": 75, "published": 1403622860, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4918, "title": "Regr", "description": "

A regression channel is a technical indicator that comprises two parallel lines equidistant from the regression trend line. These lines create a channel within which the price of an asset tends to oscillate. The distance between the channel boundaries and the central regression line is determined by the maximum deviation of the closing price from the regression line. This approach allows traders to better understand the current market dynamics and make informed decisions.

Key Characteristics of the Regression Channel:

Symmetry and Precision: The two channel lines are symmetrically positioned relative to the central regression line, ensuring an accurate reflection of price fluctuations.
Dynamic Adaptation: The channel parameters automatically adjust to market changes as calculations are based on the latest data.
Trend Indicator: The regression line shows the overall trend, while the channel boundaries help identify overbought and oversold conditions.
Ease of Interpretation: An easily interpretable indicator suitable for both novice and experienced traders.

Advantages of Using a Regression Channel:

Trend Identification: Enables traders to quickly determine the direction and strength of the current trend.
Market Deviation Assessment: Channel boundaries help identify extreme price values, indicating potential reversals.
Support and Resistance: The channel lines can serve as support and resistance levels, aiding traders in finding optimal entry and exit points.
Application Flexibility: Can be used on any time frame and for any financial instruments, including stocks, currencies, and commodities.

How to Use a Regression Channel in Trading:

Trend Determination: The slope of the regression line indicates whether the current trend is upward, downward, or sideways.
Entry and Exit Points: Enter trades when the price touches the channel boundary and exit when it touches the opposite boundary.
Deviation Analysis: Use maximum price deviations from the regression line to assess potential reversals and corrections.
Risk Management: Set stop-losses and take-profits at the channel boundary levels to minimize risks.

Practical Application in MetaTrader 5:

Indicator Installation: Add the regression channel indicator to the asset's chart in MetaTrader 5.
Parameter Adjustment: Adjust the period and other parameters for optimal display of current market conditions.
Chart Analysis: Use visual signals from the regression channel to make trading decisions.

The regression channel is a powerful tool for analyzing and forecasting market movements. Its use allows traders to make more informed decisions based on objective data and mathematical calculations. Incorporating this indicator into your trading strategy can significantly enhance your efficiency and profitability in the Forex market.

", "url": "https://www.mql5.com/ko/market/product/4918", "small_icon": "https://c.mql5.com/31/30/regr-logo-60x60-9930.png", "middle_icon": "https://c.mql5.com/31/440/regr-logo-140x140-3054.png", "icon": "https://c.mql5.com/31/30/regr-logo-200x200-8695.png", "rating": 0, "price": 30, "published": 1403798278, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4924, "title": "RegrReal", "description": "

Implementation of Regression Channel in MetaTrader 5 with Real-Time Residual Display

The regression channel in MetaTrader 5 consists of two lines, equidistant above and below the regression trend line. The distance between the channel boundaries and the regression line is determined by the deviation of the highest closing price from the regression line, which is relevant for the most recent regression points.

Problem and Solution

Typically, regression channel lines are redrawn with each new bar, making only the latest points relevant. This leads to discrepancies in the historical accuracy of the channel. To address this issue and gain a real-time representation of the regression state over time, it's necessary to display the regression lines at each point in time without redrawing them. This is the key difference between this indicator and a regular regression channel.

Key Benefits of Implementation

Historical Data Accuracy: Displaying the real state of the regression channel at each time interval allows traders to see how the channel changed over time, enhancing the accuracy of historical data analysis.
Non-Redrawing Lines: Fixing the regression lines at each bar eliminates the issue of constant redrawing, ensuring analysis accuracy and reliability.
Comprehensive Trend Representation: Preserving the historical state of the channel helps better track and understand long-term trends and their changes.

How to Use the Real Regression Channel in MetaTrader 5

Indicator Installation: Add the real regression channel indicator to MetaTrader 5 and configure its parameters according to your needs.
Historical Data Analysis: Use the display of real regression lines to analyze historical data and identify consistent trends.
Optimization of Trading Strategies: Incorporate the indicator into your trading strategy to improve forecast accuracy and trading results.

Real Regression Channel Settings

ScalePips: Scaling of all price parameters.
MaximumDrawdown: Drawdown level for closing all orders.
StopWorkingDrawdown: Stop operation after reaching maximum drawdown.
MaximumProfit: Profit level for closing all orders.
StopWorkingProfit: Stop operation after reaching maximum profit.
Lot: Fixed trade volume.
RiskOn: Enable automatic risk calculation.
Risk: Risk level.
PipsNormalModificationRisk: Risk level adjustment based on normal price.
StopsModificationRisk: Risk level dependence on Stop-Loss or Take-Profit levels.
MartinCatchingLogic: Logic for increasing order volume.

Advantages of Using the Real Regression Channel

Increased Analysis Accuracy: Real-time display of regression lines on each bar provides more accurate data for analysis.
Trend Prediction: Ability to track changes in the regression channel over time helps better predict market trends.
Improved Trading Strategies: Integrating the indicator into trading strategies enhances their efficiency and accuracy.
Historical Reliability: Seeing the real state of the channel in the past allows for more precise historical analysis.

Conclusion

The implementation of a regression channel with real-time residual display in MetaTrader 5 provides traders with a powerful tool for accurate market trend analysis and improved trading strategies. This innovation eliminates the problem of redrawing lines and ensures a more precise and reliable display of market data. Using this indicator in everyday trading can significantly enhance trading efficiency and profitability.

", "url": "https://www.mql5.com/ko/market/product/4924", "small_icon": "https://c.mql5.com/31/30/regrreal-logo-60x60-6747.png", "middle_icon": "https://c.mql5.com/31/439/regrreal-logo-140x140-8231.png", "icon": "https://c.mql5.com/31/30/regrreal-logo-200x200-5455.png", "rating": 0, "price": 34, "published": 1403798923, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 4926, "title": "LigaWin", "description": "

The Expert Advisor works on the basis of the i-Ligament indicator, can be adjusted for various time intervals, can work on the entire history without changing the settings. Uses risk of balance. Optimized by the Custom function. Expert fully automatic! And does not require the user to correct the trade. The work of an expert can be tested in a strategy tester.

\r\n

Works on netting accounts!

\r\n

", "url": "https://www.mql5.com/ko/market/product/4926", "small_icon": "https://c.mql5.com/31/629/ligawin-logo-60x60-7439.png", "middle_icon": "https://c.mql5.com/31/629/ligawin-logo-140x140-8857.png", "icon": "https://c.mql5.com/31/629/ligawin-logo-200x200-3661.png", "rating": 0, "price": 99, "published": 1403798272, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 5039, "title": "CoreFPS", "description": "

The Expert Advisor works with ticks on both netting and hedging account types. The internal algorithm uses a tick (not a bar) as a unit for analysis. The product works with 5-digit quotes. Requotes are critical. A broker with the minimum execution delay is required.

The Expert Advisor does not use history stored in the database. It downloads history data online creating its own database stored in the internal memory. After the restart, the database is deleted and should be downloaded again. The size of the internal database is managed by CountTick parameter specifying how many ticks should be written to the database to start working. The mentioned database is used for the long-term analysis. Information from the long-term database designed for the stack is used for the short-term analysis and market entry. In other words, the EA uses the most current selection of ticks from the stack managed by the information received from the long-term database. Optimization is recommended for good results in the tester's real tick mode.

After downloading the specified volume of data, the EA starts its operation consisting of two stages. During the first stage, downloaded ticks are analyzed by the specified volume (CountTick) with the periodicity set by ReOptimization parameter. The Expert Advisor selects the best parameters it would have worked with if it had operated at that period. In other words, the best result is selected using the exhaustive search method. Since there are no much parameters to select from, this method is reasonable. Three internal parameters are selected for the search:

Adjusting the stack size from 1 to CountSteck.
Checking for enter (direct or inverted).
Adjusting sensitivity of a single tick, where 1.0 is a barrier reaction for the barrier's internal optimization: minimum (MinPips), change step (StepPips) and maximum (MaxPips).

The internal optimizer follows the mentioned principle and selects the settings that yielded the best results entering the market and working there till the instruction on the new internal reoptimization (ReOptimization) is received. During the first configuration of the tick history, the EA does not enter the market till the database is filled. During the next reoptimization cycle, there are no delays, since the database is updated online and is always relevant.

During the second stage, the EA enters the market using the internal optimizer's settings and the stack data. TP and SL are used to secure the position, though they may be especially important with some settings.

OnComment - display comment (slows down the tester operation).
OnWithdrawal - simulate a profit withdrawal when reaching 100% of profit (work during testing).
TypeFilling - set order filling type.
Lot - lot size for a market entry.
Risk - calculate a lot considering a deposit.
Drawdown - maximum drawdown, at which closing is performed.
MaxSpread - maximum acceptable spread for a market entry.
CountSteck - tick stack size (max = 9).
ReOptimization - iterative optimization period.
CountTick - number of ticks for analysis in the database.
MinPick - price tick impulse (single tick sensitivity).
StepPips - impulse series step (stack depth).
MaxPips - enter in the impulse direction/against it.
TP - desirable take profit (corrected by the EA).
SL - desirable stop loss (corrected by the EA).

The EA should be preliminarily optimized by the following parameters:

CountTick (150,50,10000).
ReOptimization (arbitrarily).
TP and SL are also possible.

If optimization is very resource-consuming in your case, use the ready-made settings provided in the Comments or contact me via a private message.

", "url": "https://www.mql5.com/ko/market/product/5039", "small_icon": "https://c.mql5.com/31/32/corefps-logo-60x60-3327.png", "middle_icon": "https://c.mql5.com/31/446/corefps-logo-140x140-7853.png", "icon": "https://c.mql5.com/31/32/corefps-logo-200x200-8758.png", "rating": 3.6666667461395264, "price": 399, "published": 1406303081, "popularity": 0, "category": "Expert", "votes": 6 }, { "id": 5195, "title": "Advanced Harmonic Patterns MT5", "description": "

표시기는 Dynamic ZigZag( https://www.mql5.com/en/market/product/5356 )를 기반으로 차트에 고조파 패턴을 표시하며 잘 알려진 korHarmonics 버전 중 하나와 거의 완전한 아날로그입니다. 표시기는 ABCD, Gartley(Butterfly, Crab, Bat), 3Drives, 5-0, Batman, SHS, One2One, Camel, Triangles, WXY, Fibo 및 Vibrations와 같은 패턴과 그 종류를 인식합니다. ABCD 및 Gartley 패턴의 표시만 기본적으로 설정에서 활성화됩니다. 역선은 반대 정점을 고정하는 순간을 정의할 수 있습니다. 다양한 사용자 정의 매개변수가 제공됩니다.

메타트레이더 5 버전: https://www.mql5.com/en/market/product/5195

다운로드할 수 있는 매개변수에 대해 설명합니다.

", "url": "https://www.mql5.com/ko/market/product/5195", "small_icon": "https://c.mql5.com/31/33/advanced-harmonic-patterns-mt5-logo-60x60-4990.png", "middle_icon": "https://c.mql5.com/31/439/advanced-harmonic-patterns-mt5-logo-140x140-7401.png", "icon": "https://c.mql5.com/31/33/advanced-harmonic-patterns-mt5-logo-200x200-1743.png", "rating": 5, "price": 35, "published": 1407146173, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 5207, "title": "MA Crossing", "description": "

MA Crossing displays two moving averages on the chart painting their crossing points in different colors - blue (buy) and red (sell).

\r\n

The indicator clearly defines the trend direction and power and simplifies the perception of market signals. The indicator may be useful in the strategies involving two moving averages' crossing method.

\r\n

The indicator's input parameters allow you to select the following settings for each moving average:

\r\n

period (Fast Period, Slow Period);
smoothing period (Simple, Exponential, Smoothed, Linear weighted);
applied price (Close, Open, High, Low, Median, Typical, Weighted).

", "url": "https://www.mql5.com/ko/market/product/5207", "small_icon": "https://c.mql5.com/31/31/ma-crossing-logo-60x60-3677.png", "middle_icon": "https://c.mql5.com/31/438/ma-crossing-logo-140x140-9644.png", "icon": "https://c.mql5.com/31/31/ma-crossing-logo-200x200-8244.png", "rating": 0, "price": 30, "published": 1405426548, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 5234, "title": "Sideways Market Statistical Analyzer MT5", "description": "

Introduction to Sideways Market Analyzer

Notable period of Low volatility and non-trending movements in the financial market is considered as Sideways Market. Sooner or later, the low volatility will increase and the price will pick up a trend after Sideways Market. In terms of trading point of view, Sideways Market can serve as the very good entry timing for traders. Sideways Market is also quite often the representation of accumulation of large orders from big investors. Therefore, knowing the presence of Sideways Market can help you to decide good entry and exit timing.

Traditionally, the Average Directional Index (ADX) indicator or moving average of standard deviation indicators was used to roughly determine the presence of Sideways Market. However, both of the indicators are lagging with very low correlation with future price movement. They will not provide you clear idea on when the Sideways Market started and when it ends. Missing all these important information leaves traders with a very uncertain picture on the current market situation.

Here we have very accurate Sideways Market Analyzer inspired by the statistical theory. Indeed, this Sideways Market Statistical Analyzer can detect Sideways Market just like human eyes can do. In terms of trading signal, you open a buy order when the price hits the top of the Sideways and you open a sell order when the price hits the bottom of the detected Sideways Box. Sideway Market Analyzer provides you with a fixed stop loss and take profit levels. Sideways Market Statistical Analyzer works well for most of the currency pairs.

Symbol	Cut Probability	Box Buffer Pips	Take Profit	Lot Multiplier	Total Net Pip gains (9 month)	Monthly Pip Gains
AUDCAD	0.26	2	3.2	1.6	1 519.00	159.89
GBPUSD	0.16	0	2.4	1.6	1 607.60	169.22
ERUUSD	0.34	0	1.4	1.6	1 684.00	177.26
EURJPY	0.43	0	2.6	1.6	1 550.30	163.19
EURAUD	0.30	7	2.4	1.6	3 316.20	349.07
Sum					9 677.10	1 018.64

For XAUUSD (Gold), Cut Probability = 0.15, Box Buffer Pips =0, Take Profit = 1.3, Lot Multiplier = 1.6 return the total Net Pip gains of 27 265 pips during 9 month period and Monthly pip gains is 2 870 pips. So, it works very well for Gold, too.

Important Trading Parameters

Cut Probability – you can enter from 0.01 to 0.99. The value will mostly stay between 0.05 and 0.5. This cut probability is the criteria to qualify the Sideways Movement of the current group of candle bars based on the probability distribution.
Box Buffer Pips – you can enter from 0 to 100. The value will mostly stay between 0 and 10. The pip value is the offset distance from the detected Sideways Market. This will be represented by the long horizontal line above and below the detected Sideways Market on your chart. This line can be used as the trigger point for your buy and sell orders.
Take Profit Ratio – the Ratio of your take profit pips/box height. The value will mostly stay between 1 and 3. 1 indicates that your take profit's pips are equal to the height of the box.
Lot Multiplier – Lot Multiplier is used when your previous trading hits stop loss. The value will mostly stay between 1.5 and 2.0. It is recommended to use the value less than 1.7.

Trading Strategy Guide

You can use Sideways Market Analzyer together with any of following technical analysis. In general, combining one or two price action analysis can improve the trading accuracy. This is the known fact confirmed by many experienced trader.

Guide for Volume Spread Analysis

Guide for Harmonic Pattern Detection Indicator

Guide for Momentum Indicator

Guide for Supply Demand Indicator

Guide for Triangle Pattern, Falling Wedge Pattern, Rising Wedge Pattern and Channel

Guide for Elliott Wave Indicator

Important Note

", "url": "https://www.mql5.com/ko/market/product/5234", "small_icon": "https://c.mql5.com/31/262/sideways-market-statistical-analyzer-mt5-logo-60x60-4360.png", "middle_icon": "https://c.mql5.com/31/438/sideways-market-statistical-analyzer-mt5-logo-140x140-8370.png", "icon": "https://c.mql5.com/31/262/sideways-market-statistical-analyzer-mt5-logo-200x200-9374.png", "rating": 5, "price": 100, "published": 1406627749, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 5273, "title": "Currency Power Meter MT5", "description": "

Currency Power Meter shows the power of major currencies against each other. The indicator shows the relative strength of currency/pair at the current moment in a\r\n period of time (H4, daily, weekly, monthly). It is useful for day traders, swing traders and position traders with suitable period options.

\r\n

Currency power is the true reason of market trend: The strongest currency against the weakest currency will combine into a most trending pair. As we know, trend makes money and all traders love trend.

\r\n

Have you ever asked yourself that why some trades seem have a good signal but still fail? The reason is you only look at individual signal on your favorite pair, but not have an overview on the currency power against all the others, which is better to make decision. So, this indicator shows you which currency is strongest and which is weakest, thus the most trending pair. It also let you know which currency (thus pairs) is neutral and you should avoid to trade it.

\r\n

Highlight Features:

\r\n

Real-time and visually present the power of major currencies against the others.
Switchable between \r\nFull mode (show correlated currencies against major currencies) and \r\nCompact mode (only show major currencies' power index).
Switchable between analyzed periods: Daily, Weekly, Monthly.
Alert message when a currency or pair change its power.
If alert is on, notification will also be sent to mobile and email automatically when a currency or pair change its power.
Selectable font size to fit your screen resolution.
Allows to move the position of indicator freely on the chart.

\r\n

User guide:

\r\n

Indicator draws a table of major currencies in a center horizontal gray row and other currencies against each of them in the blue-red columns.
Each currency power index is analyzed and summarized from its relative strength against the others. Its value corresponds with it status as follows:
\r\n

Lower than -5.0: Extreme weak.
From -5.0 to -2.5: Very weak.
From -2.5 to -1.0: Weak.
From -1.0 to +1.0: Neutral.
From +1.0 to +2.5: Strong.
From +2.5 to +5.0: Very strong.
Higher than +5.0: Extreme strong.

If a currency is red: It is stronger than the base currency in selected period.
If a currency is blue: It is weaker than the base currency in selected period.
The higher its position (darker red), the stronger it is.
The lower its position (darker blue), the weaker it is.

\r\n

Note: Indicator may take time to analyze and arrange the currency cells in the first time it load new timeframe, so please wait until it finished.

\r\n

Strategy:

\r\n

Strategy with this indicator is very simple: Look for a strong-side currency and a weak-side currency, so that the difference of power between them is larger than 5. Then trade the pair between them. Example: AUD is -3.8 and USD is +2.5 => 2.5 + 3.8 = 6.3 > 5 (Sell AUDUSD).
Best time to trade (for day trader): London session (Trends are usually start and develop from this session).
Time avoid to trade (for day trader): New York 2nd half-part session (Trends are usually exhaust and may reverse in this half-part session, although there may be still a big difference between the strongest and the weakest, just wait until the next day).
Note: This indicator real-time analyzes the current price of currencies in selected period, so you will see that the power of currencies is usually neutral at the beginning of period (day, week, month). Then, it will diverge over the time; this is the point for you to know when a currency start to volatile in the market.

", "url": "https://www.mql5.com/ko/market/product/5273", "small_icon": "https://c.mql5.com/31/32/currency-power-meter-mt5-logo-60x60-8289.png", "middle_icon": "https://c.mql5.com/31/447/currency-power-meter-mt5-logo-140x140-5976.png", "icon": "https://c.mql5.com/31/32/currency-power-meter-mt5-logo-200x200-6811.png", "rating": 5, "price": 49, "published": 1406285225, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 5358, "title": "XOATRHIST 5", "description": "

Version for MetaTrader 5.

The indicator is based on point and figure chart, but their period is equal to ATR indicator values.

Displays in the form of steps. Steps above zero indicate an uptrend. Below zero on a downtrend.

Parameters:

ATRPeriod - ATR period for calculation of steps.

Note: The indicator uses closes price, thus it is recommended to consider completed bars.

", "url": "https://www.mql5.com/ko/market/product/5358", "small_icon": "https://c.mql5.com/31/32/xoatrhist-5-logo-60x60-9113.png", "middle_icon": "https://c.mql5.com/31/440/xoatrhist-5-logo-140x140-9264.png", "icon": "https://c.mql5.com/31/32/xoatrhist-5-logo-200x200-6679.png", "rating": 3, "price": 30, "published": 1406301086, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 5375, "title": "Vates", "description": "

Vates is a Latin word meaning a prophet.

\r\n

Vates is a multicurrency trend Expert Advisor that can run on any type real accounts, on any timeframe, with any initial deposit, with a fixed or varying lot size, with four and five-digit quotes, with brokers offering different order filling types.

\r\n

A distinctive feature of the EA is its stability and reliability. The results of Expert Advisor testing in the Strategy Tester in four modes (two main modes – normal and with a delay, and two additional modes – all ticks and OHLC on M1), as well as its operation on demo and live accounts are virtually identical.

\r\n

The EA should be tested and optimized in a normal mode or with any delay, OHLC at M1, timeframe - any.

\r\n

The Expert Advisor determines the direction of the trend, as well as oversold or overbought states of the market, and when it receives a signal, it opens a buy or sell position. The position is then closed by a reverse signal or by Stop Loss or Trailing.

\r\n

The EA can open additional orders in the direction of the opened position with the same lot size. Additional orders are opened only if the EA receives one more signal to open a position in the same direction after it has opened a position, and if the drawdown of the open position has exceeded the amount specified in the Drawdown Percent parameter.

\r\n

When power is off, Internet connection is lost, the computer or the terminal is restarted, as well as when you chang the input parameters, the Expert Advisor checks open positions for all pairs (with additional orders or without them) and correctly calculates the orders and drawdown on them.

\r\n\r\n

\r\n

Input parameters

\r\n

Magic - a unique magic number for identifying positions opened by the EA;
Max. Spread - maximum allowed spread in points to open a position;
Slippage - allowed slippage in points for market orders;
Lot - Fixed Lot or Lot Percent;
Fixed Lot - the size of the fixed lot for opening a position;
Lot Percent - lot size equal to a percent of the current balance: lot = Balance * Lot Percent / 100000;
Mode - select Closed (positions are opened and closed based on a closed bar) or Current (positions are opened and closed based on the current value);
Applied Price - choose one of the seven price types (Close, Open, High, Low, Median, Typical, Weighted);
Filter - choose one of the four price smoothing types;
X-Factor, Y-Factor, Z-Factor - numerical values that define the EA operation (for EA testing and optimization in the Strategy Tester, the initial and final values, as well as the value modification step are specified in the EA inputs);
Add Order - number of additional orders for an open position (if 0, no addition orders);
Drawdown Percent - drawdown of an open position as a percent of the current balance (active only if Add Order > 0);
Stop Loss - Stop Loss in points (if 0, disabled);
Use Trailing - false/true (if false, trailing is disabled);
Trailing Start - the number of profit points of an open position, reaching which the trailing is activated;
Trailing Stop - in points (if trailing is on, Stop Loss = Price Bid – Trailing Stop for Buy or Stop Loss = Price Ask + Trailing Stop for Sell);
Order Filling Type - select order filling type to prevent the \"Invalid Order Filling Type\" trading error (if this error appears in the log, change the order filling type).

\r\n

Note: the values of Max. Spread, Slippage, Stop Loss, Trailing Start and Trailing Stop are specified for 4-digit quotes. No need to change the values for 5-digit quotes, they will be adjusted automatically.

", "url": "https://www.mql5.com/ko/market/product/5375", "small_icon": "https://c.mql5.com/31/190/vates-logo-60x60-5781.png", "middle_icon": "https://c.mql5.com/31/438/vates-logo-140x140-6451.png", "icon": "https://c.mql5.com/31/190/vates-logo-200x200-5810.png", "rating": 4.199999809265137, "price": 60, "published": 1406638894, "popularity": 0, "category": "Expert", "votes": 5 }, { "id": 5409, "title": "Trade Controller MT5", "description": "

Trade Controller provides multiple methods to protect and maximize your profits. This powerful weapon helps you to set the protect and trailing-stop rules on your trade automatically in many effective methods. Once it is set and turned on, you don't need to monitor your orders anymore, the software will keep watching and control your orders with your predefined rules.

\r\n

It's designed to support multi-protection and trailing strategy: Protect by break-even, protect by percentage, protect by pip, protect by account value, trailing by distance, trailing by indicators, etc.

\r\n

This tool is the controller part originating from Auto Trade Driver MT5: https://www.mql5.com/en/market/product/4638

\r\n

Note: Demo version for testing can be found here: https://www.mql5.com/en/market/product/5410

\r\n

Features

\r\n

4 main control panels: Protection, Trailing Stop, Partial Close and Shortcut. Each panel features various options.
Allow to apply multi-protection and trailing-stop rules at once by running it on multiple charts (on \"First Come, First Served\" basis).
Control all orders on all symbols with one tool in single chart, no need to attach tool to every chart.
Real-time control panel.
Restore previous settings after shutdown or power-off.

\r\n

Protection Control Panel

\r\n

Apply to: Choose which kind of orders will be protected, there are some options: All orders, Buy orders, Sell orders, Custom ticket order, Custom magic number order, Account value.
For current pair check box: Check this box if you only want to apply protection on selected orders (by Apply to) for current pair only.
Type: Protection type that will be applied. \r\n
- Basic: When order make profit at X points, then stop loss will be moved to Y points from EP.
- Profit/Loss distance: Set a fixed distance at which selected orders will be closed.
- Profit/Loss percent: Set a fixed profit/loss percentage at which selected orders will be closed.
- Profit/Loss amount: Set a fixed amount of money at which selected orders will be closed.
- Drawdown/Growth %: Set a fixed entire account drawdown/growth percent at which all opening orders will be closed.
- Drawdown/Growth $: Set a fixed entire account drawdown/growth amount at which all opening orders will be closed.
Protect status button: Enable/Disable Protection by clicking on this button. Protection takes effect in real-time with its current settings and Protection status immediately. If you want to view other settings without taking effect, just disable Protection before change.

\r\n

Trailing-Stop Control Panel

\r\n

Apply to: Choose which kind of orders will be stop trailed, there are some options: All orders, Buy orders, Sell orders, Custom ticket order, Custom magic number order.
For current pair check box: Check this box if you only want to apply trailing on selected orders (by Apply to) for current pair only.
Type: Trailing-stop method that will be applied. There are 5 methods:\r\n
- Fixed distance: This is like common trailing method that MT4 provide. But it's even better since you can set a distance smaller than Stop/Limit level, that means Stop/Limit level set by broker is skipped now.
- Moving Average: Moving average can be used in many ways for trailing stops. MA trailing is a pretty fast to lock profits. Trailing with MA High/Low is also a good idea.
- Parabolic SAR: Using PSAR is a safe way to trailing. It's a long runner if you catch a trend.
- Zigzag channel: Zigzag channel is made from the boundary of zigzag swing points. Like PSAR, Zigzag channel is a \"slower but longer\" trailing.
- ATR value: Average True Range (ATR) determine the average volatility of price at the meantime. So, trailing based on its value is favorite choice of many traders.
Aggressive mode: Check this box if you want to trail stops from the order's opening based on price value (original stop loss distance may be reduced step by step). Unchecking this box will make trailing-stop to take effect only when trailing-point makes profit only.
Show trailing mark: Checking this box will show the indicator mark on the chart that reflect the selected trailing method.
Trailing status button: Enable/Disable Trailing by clicking on this button. Trailing takes effect in real-time with its current settings and Trailing status immediately. If you want to view other settings without taking effect, just disable Trailing before change.

\r\n

Partial Close Control Panel

\r\n

Apply to: Choose which kind of orders will be partially closed, there are some options: All orders, Buy orders, Sell orders, Custom ticket order, Custom magic number order.
For current pair check box: Check this box if you only want to apply partial close on selected orders (by Apply to) for current pair only.
1st Close: Choose X percent of order's volume to be closed for the first time whenever the order makes profit of A points from EP.
2nd Close: Choose Y percent of order's volume to be closed for the second time whenever the order continues to make profit of B points from EP.
3rd Close: The rest volume of order will be closed whenever it continues to make profit of C points from EP.
Partial close status button: Enable/Disable Partial close by clicking on this button. Partial close takes effect in real-time with its current settings and Partial close status immediately.

\r\n

Shortcut Control Panel

\r\n

For current pair check box: Check this box if you only want to apply the shortcut command for the current pair only.
Close: This shortcut is used to perform close command on selected opening orders: All orders, Buy orders, Sell orders, Winning orders (Profit+Commission>0), Losing orders (Profit+Commission<0).
Delete: This shortcut is used to perform delete command on selected pending orders: All (pending) orders, All Buy Stop, All Sell Stop, All Buy Limit, All Sell Limit.
Remove Stoploss: This shortcut is used to remove stop loss from selected orders: All orders, Buy orders, Sell orders, Winning orders, Losing orders, Pending orders.

\r\n

Trade Statistic Panel

\r\n

To view trade statistic panel, just go to Setting menu --> Show trade statistic. This panel helps you to overview your account statistics in the mean time, which includes Buy orders, Sell orders, Winning orders, Losing orders, Total potential SL and Total potential TP.
To move this panel, just click on Move icon on the right and place the panel wherever you want on chart.

", "url": "https://www.mql5.com/ko/market/product/5409", "small_icon": "https://c.mql5.com/31/33/trade-controller-mt5-logo-60x60-7924.png", "middle_icon": "https://c.mql5.com/31/440/trade-controller-mt5-logo-140x140-8020.png", "icon": "https://c.mql5.com/31/33/trade-controller-mt5-logo-200x200-4631.png", "rating": 5, "price": 79, "published": 1406890336, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 5685, "title": "TimePeriodAlarmMT5", "description": "

The TimePeriodAlarm indicator shows time till closure of a bar. If the 'Time period' is specified explicitly (i.e. not 'current'), the indicator displays the time till bar closure of the current period and the explicitly specified period.

\r\n

Ten seconds before the closure of the bar (at the period specified explicitly), a preliminary sound alert is played and a color alert is generated, then the main signal (can be set by the user) in the parameter 'Sound file(.wav)' is played. The sound file should be located in the 'Sounds' folder of your trading platform. If this parameter is set to 'default', the default sound is used, if 'space' or empty - sound indication is disabled.

\r\n

A sound alert can also be disabled or enabled by a click on a loudspeaker image.

", "url": "https://www.mql5.com/ko/market/product/5685", "small_icon": "https://c.mql5.com/31/35/timeperiodalarmmt5-logo-60x60-4612.png", "middle_icon": "https://c.mql5.com/31/439/timeperiodalarmmt5-logo-140x140-6244.png", "icon": "https://c.mql5.com/31/35/timeperiodalarmmt5-logo-200x200-4934.png", "rating": 0, "price": 30, "published": 1409576920, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 26680 }

Calculation\r\n

General Parameters

Advantages

Calculation

Calculation

Description:

Parameters:

Input Parameters:

General Parameters:

Advantages of Use:

How to use Pair Trading Station

Must Read and Follow

Input Variable Description

Important Note

The following values are displayed:

External parameters:

Parameters

Usage

Input Parameters

Stay ahead of the market: predict buying and selling pressure with ease

Input Parameters

Author

Key Characteristics of the Regression Channel:

Advantages of Using a Regression Channel:

How to Use a Regression Channel in Trading:

Practical Application in MetaTrader 5:

Implementation of Regression Channel in MetaTrader 5 with Real-Time Residual Display

Problem and Solution

Key Benefits of Implementation

How to Use the Real Regression Channel in MetaTrader 5

Real Regression Channel Settings

Advantages of Using the Real Regression Channel

Conclusion

Highlight Features:

User guide:

Strategy:

Input parameters

Features

Protection Control Panel

Trailing-Stop Control Panel

Partial Close Control Panel

Shortcut Control Panel

Trade Statistic Panel

Calculation
\r\n

거래 로봇, 지표 및 거래 응용 프로그램의 외환 시장

가격

Trinity Impulse Relative Vigor Index

Bears Bulls Histogram

CCI normalized

R2 oscilator

LRS Lineal Regresion Slope

Moving Average Bars 5

Abigail 5

Tick by Tick 5

Brilliant Keltner Channel

Fibonacci Moving Bars 5

Fibonacci Ribbon 5

Chart CCI 5

Trend Bands 5

Indicator for M15 TimeFrame

Flat Market 5

MA on MA on MA

CCI Trend

Multi Time Frame Moving Averages

Power MT5

Fibonacci Moving Averages with Buy and Sell Arrows

ATR channel all MAs

Correlation Analyzer

Kolier SuperTrend MTF

Tick by Tick plus Indicator by choice

Moving Above Average MT5

Vertical Histogram Volume

Moving Above Envelopes MT5

Four Bands

Pair Trading Station MT5

High And Low MT5

Alligator Steps MT5

Fibonacci Waves MT5

Angle DeMarker MT5

Pairs Trading Candle Chart

Levels on Chart

Price River MT5

FORTS Open Interest

Support Resistance Fibonacci MT5

PositionGuard MT5

New Age Indicator MT5

Tick Hour Tick MT5

Silver Clouds MT5

Best Price Finder

Trapezoidal Support and Resistance MT5

Pine Trees MT5

Moving Envelopes MT5

Auto Close Timer Ultimate

True Range Bands MT5

Trend in Colors MT5

Fibonacci Doppler MT5

Support and Resistance 5 days MT5

Bears Bulls Complex MT5

Bears MACD MT5

FORTS MAX

Bulls MACD MT5

Trend Histogram MT5

Parabolic SAR MTF

Price Breakout Pattern Scanner MT5

TradePad

PZ Supply Demand MT5

Regr

RegrReal

LigaWin

CoreFPS

Advanced Harmonic Patterns MT5

MA Crossing

Sideways Market Statistical Analyzer MT5

Currency Power Meter MT5

XOATRHIST 5

Vates

Trade Controller MT5

TimePeriodAlarmMT5