{ "from": 2952, "count": 72, "list": [ { "id": 397, "title": "Informer Volatility", "url": "https://www.mql5.com/ko/market/product/397", "small_icon": "https://c.mql5.com/31/344/informer-volatility-logo-60x60-9243.png", "middle_icon": "https://c.mql5.com/31/439/informer-volatility-logo-140x140-5207.png", "icon": "https://c.mql5.com/31/344/informer-volatility-logo-200x200-8142.png", "rating": 0, "price": 50, "published": 1570386343, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 407, "title": "Morning Evening Star", "description": "

The indicator displays the \"Morning star\" and \"Evening star\" patterns on a chart.

\r\n

The Evening star is displayed in red or rose. The Morning star is displayed in blue or light blue.

\r\n

Input Parameters:

\r\n

Max Bars – number of bars calculated on the chart.
Make Signal Alert – use alerts.
Send Push Notification - send notification to a mobile terminal
Type of rules pattern – type of the model of pattern determination (Hard – with the control of length of shadows of the second bar). If Soft is selected then patterns that do not meet the maximum shadow length condition will be displayed in light colors (rose or light blue).
Smart Filter Enabled – filter that considers the probability of reverse.
Sensitivity Smart Filter – sensitivity of the \"Smart Filter\" (0 ÷ 1). 1 – maximum sensitivity. 0 – minimum sensitivity (there will be less signals).
Ratio of body length (first bar) – coefficient of the minimal length of body of the first bar.
Ratio of body length (second bar) – coefficient of the maximal length of body of the second bar.
Ratio of length of shadows (second bar) – coefficient of the maximal length of shadows of the second bar.
Ratio of body length (third bar) – coefficient of the minimal length of body of the third bar.
Short-Term Trend Filter – settings of the short-term trend filter.
MA Filter Enabled – use the short-term trend filter based on MA.
MA Method – method of averaging of MA.
MA Period – period of MA.
MA Price Type – type of price used.
Set Bollinger Bands Filter – setting of the filter based on the Bollinger Bands indicator.
Enabled Filter – use the filter based on the Bollinger Bands indicator.
Entry BBands period – period of Bollinger Bands.
Entry BBands deviation – deviation of Bollinger Bands.
Range Check – number of bars to be checked.

\r\n

Recommendations on usage:

\r\n

Enter the market by pending orders placed:

\r\n

on the Low level of the third bar minus several points for the Evening star.
on the High level of the third bar plus several points for the Morning star.

\r\n

SL is placed on the local extremum level plus several points.

\r\n

A signal formed on Friday 3-4 hours before the end of a trade session should be better skipped.

\r\n

If there is an open position when a signal appears, it is recommended not to reverse, but continue trailing the open position.

", "url": "https://www.mql5.com/ko/market/product/407", "small_icon": "https://c.mql5.com/31/2/ME_S_5_60x60.png", "middle_icon": "https://c.mql5.com/31/440/morning-evening-star-logo-140x140-3859.png", "icon": "https://c.mql5.com/31/2/ME_S_5.png", "rating": 0, "price": 40, "published": 1350052547, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 415, "title": "HL D1 Move", "description": "

The indicator displays the dynamics of forming the daily range in the form of a histogram, and the average daily range for a specified period.

\r\n\r\n

The indicator is a useful auxiliary tool for intraday trades.

\r\n\r\n

Settings

\r\n\r\n

N Day - period for calculation of the daily range value.
Level Indefinite - level of indefiniteness.
Level Confidence - level of confidence.
Level Alert - alert level. When it is crossed, the alert appears.

", "url": "https://www.mql5.com/ko/market/product/415", "small_icon": "https://c.mql5.com/31/4/HL_D1_Move_60x60.png", "middle_icon": "https://c.mql5.com/31/441/hl-d1-move-logo-140x140-1770.png", "icon": "https://c.mql5.com/31/4/HL_D1_Move.png", "rating": 0, "price": 30, "published": 1350300908, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 422, "title": "Modified Awesome Oscillator", "description": "

The main purpose of the indicator is to detect and mark trade signals on the histogram of the Awesome Oscillator according to the strategies \"Trading Chaos, second edition\" and \"New Trading Dimensions\".

\r\n

The indicator detects and marks the following trade signals:

\r\n

\"Two peaks\" - Divergence.
The signal \"Second wise-man\" - third consequent bar of the Awesome Oscillator after its color is changed.
The histogram crosses the zero line.
The signal \"Saucer\".

\r\n

The indicator includes a signal block that informs the trader about new signals in any convenient form.

\r\n

The indicator is a part of the integral trading complex based on the strategy \"Trading Chaos\". The indicator is a part of a pattern. It is recommended to use the indicator together with the following products:

\r\n

Trading Chaos Expert
Trading Chaos Chart
New Trading Dimensions Chart
Modified Accelerator Oscillator
Recognizer 1 2 3 Patterns
WavesMaker
Spread and swap monitor
Virtual pending sell stop order (simplified version of the Expert Advisor )
Virtual pending buy stop order (simplified version of the Expert Advisor )
\r\n

", "url": "https://www.mql5.com/ko/market/product/422", "small_icon": "https://c.mql5.com/31/2/AO_60x60.png", "middle_icon": "https://c.mql5.com/31/445/modified-awesome-oscillator-logo-140x140-5702.png", "icon": "https://c.mql5.com/31/2/AO.png", "rating": 5, "price": 60, "published": 1353331570, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 451, "title": "Twiggs Money Flow Index", "description": "

Twiggs Money Flow Index는 Collin Twiggs가 만들었습니다. Chaikin Money Flow Index에서 파생되지만 갭으로 인한 급등을 방지하기 위해 고점에서 저점을 뺀 값 대신 실제 범위를 사용합니다. 또한 스무딩 지수 이동 평균을 사용하여 볼륨이 급증하여 결과가 변경되는 것을 방지합니다. 지수 이동 평균은 Welles Wilder가 그의 많은 지표에 대해 설명한 것입니다.

Twiggs Money Flow Index가 0보다 높으면 플레이어가 누적되므로 가격이 더 높아질 수 있습니다. Twiggs Money Flow Index가 0 미만이면 플레이어가 분배하고 가격이 더 낮아질 수 있습니다.

Twiggs Money Flow Index 지표와 가격의 차이도 좋은 신호를 제공합니다.

", "url": "https://www.mql5.com/ko/market/product/451", "small_icon": "https://c.mql5.com/31/2/Twiggs-Money-Flow-Index_200_60x60.png", "middle_icon": "https://c.mql5.com/31/439/twiggs-money-flow-index-logo-140x140-9818.png", "icon": "https://c.mql5.com/31/2/Twiggs-Money-Flow-Index_200.png", "rating": 0, "price": 35, "published": 1353600361, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 459, "title": "Spread Report", "description": "

..................................

This script is intended to help users to get information about ticks and spreads (e.g. ticks count, minimum/maximum/average spread). It can export reports in the CSV format with this information.

Traders can see spread statistics in real time in the chart window

It is useful for comparing spreads of different brokers.

--------------------------------------------------------------------------

", "url": "https://www.mql5.com/ko/market/product/459", "small_icon": "https://c.mql5.com/31/264/spread-report-logo-60x60-7165.png", "middle_icon": "https://c.mql5.com/31/439/spread-report-logo-140x140-4181.png", "icon": "https://c.mql5.com/31/264/spread-report-logo-200x200-3225.png", "rating": 0, "price": 30, "published": 1353076207, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 513, "title": "Depth of Market", "description": "

This is visualization tool based on the Depth of Market. It works with the symbols that have the Depth of Market available.

It's a visual indicator that shows the volume of each Bid/Ask price and ratio of total volume of Bids/Asks.

Note: check if your broker supports DOM before purchasing.

。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。

", "url": "https://www.mql5.com/ko/market/product/513", "small_icon": "https://c.mql5.com/31/271/depth-of-market-logo-60x60-4301.png", "middle_icon": "https://c.mql5.com/31/445/depth-of-market-logo-140x140-1685.png", "icon": "https://c.mql5.com/31/271/depth-of-market-logo-200x200-2026.png", "rating": 0, "price": 30, "published": 1353928804, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 536, "title": "Money Flow Index Multiple timeframes", "description": "

Money Flow Index is a multiple timeframes indicator that displays the Money Flow Index of any timeframe.

It helps you to focus on long term money flow before using the money flow of current timeframe.

You can add as many Money Flow Index - Multiple timeframes as desired. Refer to the screenshots to see the M30 / H1 / H4 Money Flow Indexes in the same window for example.

", "url": "https://www.mql5.com/ko/market/product/536", "small_icon": "https://c.mql5.com/31/2/Money-Flow-Index-MTF_200x20_60x60.png", "middle_icon": "https://c.mql5.com/31/439/money-flow-index-multiple-timeframes-logo-140x140-3827.png", "icon": "https://c.mql5.com/31/2/Money-Flow-Index-MTF_200x20.png", "rating": 0, "price": 30, "published": 1354628417, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 539, "title": "On Click Trade", "description": "

This is an Expert Advisor that allows opening and modifying positions and orders via mouse (with Stop Loss, Take Profit).

\r\n

Working with this Expert Advisor requires setting lot size, take profit and stop loss for positions. For pending orders you need to set lot size, take profit, stop loss and distance (pip).

\r\n

This Expert Advisor has only one input parameter - background color.

", "url": "https://www.mql5.com/ko/market/product/539", "small_icon": "https://c.mql5.com/31/2/onclick_60x60.png", "middle_icon": "https://c.mql5.com/31/444/on-click-trade-logo-140x140-2753.png", "icon": "https://c.mql5.com/31/2/onclick.png", "rating": 0, "price": 30, "published": 1354627729, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 573, "title": "Expert NEWS", "description": "

The Expert Advisor trades on market surges, while not using any indicators.

The Expert Advisor analyzes the speed of price movement and if the price starts moving faster than the set one, opens a position in the direction of price movement.

Trades are closed by SL TP and trailing stop.

If the averaging is set to greater than 0, then the stop loss is not set, but new deals are opened with an increased lot and averaged.

Parameters:

Lot = 0.1;
LevelNewse = 50; strength of the news (price jumps in pips)
TimeSet = 10; speed measurement time (sec) 10-60
StopLoss = 400; StopLoss (0-disabled)
K_Lite = 2.0; Averaging coefficient (0- disabled)
TakeProfit = 500; TakeProfit (0-disabled)
TrailingStop = 0, Trailing stop, (trailing length) if 0, then there is no trailing
TrailingStart = 1, Start of trailing in points
Trailingstop = 50; The step of the trawl
NoLoss = 0, Transfer to breakeven, if 0, then there is no transfer to breakeven
MinProfitNoLoss = 0; Minimum profit when transferring to a loss
OrdersMax = 2; Maximum number of open positions

", "url": "https://www.mql5.com/ko/market/product/573", "small_icon": "https://c.mql5.com/31/684/expert-news-logo-60x60-2823.png", "middle_icon": "https://c.mql5.com/31/684/expert-news-logo-140x140-7819.png", "icon": "https://c.mql5.com/31/684/expert-news-logo-200x200-3234.png", "rating": 0, "price": 300, "published": 1355830191, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 625, "title": "CloseAllPositionTune", "description": "

A script for closing positions

\r\n

If you need to quickly close several positions, but it requires specifying maximal deviation and the number of attempt to close, this script will do all the routine for you! Allow AutoTrading before running the script.

\r\n

Usage:

Run the script on a chart.

\r\n

Input Parameters:

\r\n

Language of messages displayed (EN, RU, DE, FR, ES) - language of the output messages (English, Russian, German, French, Spanish).
Slippage - acceptable slippage when closing. Specified as for 4-digit quotes, for 3 and 5-digit quotes the script will make the appropriate conversion itself.
The number of tries to close position - number of attempts to close position.

\r\n

If you don't need to adjust input parameters, use this script https://www.mql5.com/en/market/product/624

You can download MetaTrader 4 version here: https://www.mql5.com/en/market/product/2783

", "url": "https://www.mql5.com/ko/market/product/625", "small_icon": "https://c.mql5.com/31/3/marketBig__4_60x60.png", "middle_icon": "https://c.mql5.com/31/445/closeallpositiontune-logo-140x140-6968.png", "icon": "https://c.mql5.com/31/3/marketBig__4.png", "rating": 0, "price": 30, "published": 1358166366, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 627, "title": "DeletePendingOrderTune", "description": "

Script for deleting pending orders

\r\n

If you need to delete all pending orders you placed, this script will do it for you! Allow AutoTrading before running the script.\r\n

Usage:

Run the script on a chart.

\r\n

Input parameters:

\r\n

Language of messages displayed (EN,\r\n RU, DE, FR, ES) - language of messages displayed (English, Russian, German, French, Spanish).
Use Magic: (0 - ignore Magic, else - only this Magic) - if set to zero, the magic number is not considered. Otherwise the script deletes only orders with the specified magic number.
Use\r\n Symbol: (\"\" - ignore, else EURUSD, gbpusd) - specify a symbol, for which you need to delete pending orders. If it is left empty, the script deletes all orders.
Use\r\n Order type: (\"\" - All, ORDER_TYPE_BUY_LIMIT, ORDER_TYPE_SELL_STOP, ...)\r\n - if is left empty, the script deletes all types of pending orders, otherwise it deletes only orders of the specified type.
The number of tries to delete order - number of attempts to delete orders.

\r\n

If you don't need to adjust parameters, use the following script https://www.mql5.com/en/market/product/626

You can download MetaTrader 4 version here: https://www.mql5.com/en/market/product/2785

", "url": "https://www.mql5.com/ko/market/product/627", "small_icon": "https://c.mql5.com/31/3/marketBig__6_60x60.png", "middle_icon": "https://c.mql5.com/31/439/deletependingordertune-logo-140x140-6959.png", "icon": "https://c.mql5.com/31/3/marketBig__6.png", "rating": 0, "price": 30, "published": 1358164971, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 635, "title": "CreateGridOrdersTune", "description": "

A script for opening a grid of orders

\r\n

If you need to quickly open several pending orders (Buy Limit, Sell Limit, Buy Stop, Sell Stop) on a certain distance from the current price, this script will do all the routine for you! Allow AutoTrading before running the script.

\r\n

Usage:

Run the script on a chart.

\r\n

Input Parameters:

\r\n

Language of messages displayed (EN, RU, DE, FR, ES) - language of the output messages (English, Russian, German, French, Spanish).
Price for open - open price. If set to 0, the orders will be placed on the following distance from the current price: current price + \"The distance in the first order\".
Lot - lot size for pending orders.
Use Order type - type of pending orders.
The distance in the first order - distance for the first order in points.
Count of orders - number of orders to be opened.
The distance in between orders - distance between orders in points.
Profit in points - profit in points.
Loss in points - loss in points.
eEqualProfit - use one common take profit set for the last order. If disabled, an individual take profit will be set for each order on the specified distance.
EqualLoss - use one common stop loss set for the last order. If disabled, an individual stop loss will be set for each order on the specified distance.
Slippage - slippage.
The number of tries to create orders - number of attempts to create orders.
Magic - you can set a magic number for the orders created.

\r\n

Values are specified as for 4-digit quotes, for 3 and 5-digit quotes the script will make the appropriate conversion itself.

You can download MetaTrader 4 version here: https://www.mql5.com/en/market/product/2979

", "url": "https://www.mql5.com/ko/market/product/635", "small_icon": "https://c.mql5.com/31/3/marketBig__7_60x60.png", "middle_icon": "https://c.mql5.com/31/445/creategridorderstune-logo-140x140-4602.png", "icon": "https://c.mql5.com/31/3/marketBig__7.png", "rating": 0, "price": 30, "published": 1358335028, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 638, "title": "ReverseTune", "description": "

A script for quick reversing positions and/or orders.

\r\n

If you need to reverse a position with the same volume, open an opposite position of a different volume or change the type of existing orders (for example, Buy Limit -> Sell Limit, Buy Stop -> Sell Limit, etc.) with the same or different take profit/stop loss, this script will make all the routine for you!

\r\n

Allow AutoTrading before running the script.

\r\n

Usage:

\r\n

Run the script on a chart.

\r\n

Input Parameters:

\r\n

Language of messages displayed (EN, RU, DE, FR, ES) - language of the output messages (English, Russian, German, French, Spanish).
Reverse lot (0-2*current lot) - if set to 0, the open position is closed and an opposite position with the same volume is opened. It is greater than 0, it will open a reverse position with the corresponding volume. If it is less than 0, the existing position will be closed partially. For orders: if set to 0, the script will place an orders with the same volume. If the value is not equal to 0, it will use the volume specified in Reverse lot.
Profit in point - profit in points. If it is equal to 0, it will use the volume of the current position or pending order.
Loss in points - loss in points. If set to 0, it will use the value of the current positions or pending order.
TypeWork - work with the following trade types: Buy, Sell, Buy Limit, Sell Limit, Buy Stop, Sell Stop, All - all orders, Market - positions only, Pending - pending orders only.
Magic - you can set a magic number for new orders.
Slippage - slippage.
The number of tries to create position - number of attempts to create/delete positions or orders.

", "url": "https://www.mql5.com/ko/market/product/638", "small_icon": "https://c.mql5.com/31/3/marketBig__8_60x60.png", "middle_icon": "https://c.mql5.com/31/439/reversetune-logo-140x140-3081.png", "icon": "https://c.mql5.com/31/3/marketBig__8.png", "rating": 0, "price": 30, "published": 1358498904, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 639, "title": "TTMM Time To Make Money", "description": "

TTMM – \"Time To Make Money\" – Time When Traders Makes Money on the Stock Exchanges

\r\n

The ТТММ trade sessions indicator displays the following information:

\r\n

Trade sessions: American, European, Asian and Pacific.\r\n
(Note: Sessions are displayed on the previous five days and the \r\n current day only. The number of days may change \r\n depending on the holidays - they are not displayed in the terminals. The sessions are also not displayed on Saturday and Sunday).
\r\n
The main trading hours of the stock exchanges (time before start or end), such as: NZX - Wellington ASX - Sydney, TSE - Tokyo, SGX - Singapore, SSE - Shanghai, MICEX - Moscow, DFM - Dubai, Tadawul - Riyadh JSE - Johannesburg, FSE - Frankfurt, SIX - Zurich LSE - London, NYSE - New York, TMX - Toronto, CHX - Chicago.
Some of the coming holidays in the USA (USA), the United Kingdom (GBR), Germany (DEU), Japan (JPN), Australia (AUS), Canada (CAN Of), New Zealand (NZL) and China (CHN). The data is displayed in the format: Day. Month – Holiday (country).
Time in cities: New York, Chicago, Frankfurt, London, Wellington, Sydney, Tokyo, Singapore, Moscow, Riyadh and Johannesburg.\r\n
Note: In the Strategy Tester trade sessions are not displayed or displayed incorrectly. In case of problems with displaying in the indicator, press \"R\" button on the keyboard on the chart is active, the indicator restarts.
\r\n

\r\n

Indicator Parameters

\r\n

Data update rate (sec) – update time of technical data for calculation (<60 is recommended);
Drawing mode for Stock Exchange and Holiday – place for display information on the stock exchanges and holidays (the main window and subwindow);
Color of the American session – the color of the American session;
Color of the European session – the color of the European session;
Color of the Asian session – the color of the Asian session;
Color of the Pacific session – the color of the Pacific session;
The background color of the first window – the color of the window displaying trading hours of the stock exchanges;
The frame color of the first window – the color of the window frame displaying trading hours of the stock exchange;
Color Stock Exchange at work – the color of the stock exchange, which is at its main trading hours at the moment;
Color Stock Exchange at rest – the color of the stock exchange, which isn't at its trading hours at the moment;
Type clock mode Stock Exchange – time display mode before the start of main trading hours of the stock exchanges (hh:mm or minutes);
The background color of the second window – the color of the window displaying holidays;
The frame color of the second window – the color of the window frame displaying holidays;
Color of Holiday – the color of the holidays;
Show World Time – whether to display the World Time (time in the cities listed in item 4);
The background color of World Time – the color of the background of the World Time;
The frame color of the World Time – the color of the window frame of the World Time;
The color of the World Time – the color of the World Time;
Drawing squares of sessions – whether to draw the sessions with squares on the main window of the chart;
Drawing background squares American session – to color squares of the American session;
Drawing background squares European session – to color squares of the European session;
Drawing background squares Asian session – to color squares of the Asian session;
Drawing background squares Pacific session – to color squares of the Pacific session;
Color square of the American session – the color of squares of the American session;
Color square of the European session – the color of squares of the European session;
Color square of the Asian session – the color of squares of the Asian session;
Color square of the Pacific session – the color of squares of the Pacific session.

", "url": "https://www.mql5.com/ko/market/product/639", "small_icon": "https://c.mql5.com/31/3/TTMM_Time_To_Make_Money_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ttmm-time-to-make-money-logo-140x140-4563.png", "icon": "https://c.mql5.com/31/3/TTMM_Time_To_Make_Money.png", "rating": 0, "price": 30, "published": 1358753863, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 663, "title": "Actual Depth of Market Chart", "description": "

The professional tool of stock traders in now available on MetaTrader 5. The Actual depth of market chart indicator visualizes the depth of market in the form of a histogram displayed on a chart, which refreshes in the real-time mode.

\r\n

Meet new updates according to user requests!
\r\n Now Actual Depth of Market indicator displays the current ratio of volume of buy and sell requests (B/S ratio). It shows the share of volume of each type of requests in the entire flow of requests as well as the absolute values of the volume.
\r\n What's the use of it? There is a common point of view among HFT traders, that when there is a significant domination of request of one type, the price tends where the requests are executed, i.e. where the volume is bigger. Watch it and use for trading with our indicator\r\n Actual Depth of Market!

\r\n

With the Actual depth of market chart indicator you will be able to estimate requests on the market right and see big market makers right on the chart. This will allow precise scalping and setting stop orders for positions 100% correctly.

\r\n

The indicator displays the buy and sell requests in the form of horizontal histogram bars of two corresponding colors (buy-sell). Bars are displayed on the price chart and their length corresponds to the volume of requests for the given level. Additionally, it indicates the volume of biggest buy and sell requests.

The indicator displays the total number of buy and sell requests as a stacked area chart. This allows estimating the total volume of requests that will be executed when passing to the next price level. The total volume of buy and sell requests is also displayed on the chart.

\r\n

On default, the indicator is displayed on the chart background and it does not interfere with any other indicators. When using this indicator for trading, it is recommended to go by real volumes.

\r\n

This indicator will only work with symbols that have the depth of market available. First of all, it will be interesting for trades on the FORTS market and other stock markets accessible through MetaTrader 5.

\r\n

The indicator parameters allow adjusting it to the maximum convenience of use:

\r\n

Maximal volume of request (0 - autosize) - maximal volume of a request that corresponds to the bar size. If '0' is specified, the size will be set automatically according to the maximal volume of a request in the depth of market. This parameter allows fixing the histogram scale (default value is 200).
Size of histogram bar - size of a bar of the histogram (%). Percentage of the window width that will be occupied by a request of the volume equal to the one set in the first parameter (default value is 20).
Display the indicator on background - display the indicator on the chart background. Allows drawing the indicator underneath the price chart and other indicators (default value is true).
Show B/S ratio bar - display B/S rates on the chart.
Bar height(% of window height) - height of B/S diagram (as percentage of the window height).

", "url": "https://www.mql5.com/ko/market/product/663", "small_icon": "https://c.mql5.com/31/3/34_60x60.png", "middle_icon": "https://c.mql5.com/31/441/actual-depth-of-market-chart-logo-140x140-7680.png", "icon": "https://c.mql5.com/31/3/34.png", "rating": 1, "price": 30, "published": 1359371928, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 677, "title": "ACPD Auto Candlestick Patterns Detected", "description": "

ACPD – «Auto Candlestick Patterns Detected» - The indicator for automatic detection of candlestick patterns.

The Indicator of Candlestick Patterns ACPD is Capable of:

Determining 40 reversal candlestick patterns.
Each signal is displayed with an arrow, direction of the arrow indicates the forecast direction of movement of the chart.
Each caption of a pattern indicates: its name, the strength of the \"S\" signal(calculated in percentage terms using an empirical formula) that shows how close is the pattern at an ideal one, and the trend coefficient \"T\"(calculated on the basis of three candlesticks using a score system) that shows how close it the trend to an ideal one.
The indicator includes the feature of disabling any of the patterns. If you don't need to detect a patter, simply disable it.
The indicator also features the possibility to adjust some parameters of the patterns. Thus you can adjust the indicator depending on the volatility of the instrument and control the visual deviations depending on the timeframe.

Patterns Included in ACPD – «Auto Candlestick Patterns Detected»:

One Candlestick Patterns

Hammer
Hanging Man
Inverted Hammer
Shooting Star
Spinning top
Doji
Long-Legged Doji
Gravestone doji
Doji Dragon
Doji Four Price

Two Candlestick Patterns

Engulfing
Harami
Harami Cross
Piercing Line
Dark Cloud Cover
Doji Star
Meeting Lines
Kicking
Homing Pigeon
Matching Low

Three Candle Pattern

Morning Star
Evening Star
Morning Doji Star
Evening Doji Star
Abandoned Baby
Tri Star
Upside Gap Two Crows
Unique Three River Bottom
Three White Soldiers
Advance Block
Deliberation
Three Black Crows
Identical Three Crows
Two Crows
Three Inside Up
Three Inside Down
Three Outside Up
Three Outside Down
Three Star In The South
Stick Sandwich

Main Settings of the Indicator:

Buffer candles for scanning – buffer of candlesticks that is used for searching for patterns (recommended to set a value from 10 to 100, values more than 100 may slow down the system).
Color down arrow – color of the down arrow.
Color up arrow – color of the up arrow.
The text color of single candlestick patterns – color of the caption for one candlestick patterns.
Text color double candlestick patterns – color of the caption for two candlestick patterns.
Text color triple candlestick patterns – color of the caption for three candlestick patterns.
Text size – text size.
Text font – text font.
Coefficient of trend detection model – coefficient of trend to start searching for patterns.
Shadow Umbrella Up (unlike the body) – maximal shadow of an up \"Paper Umbrella\" candlestick relative to the body (for the Hammer and Hanging Man patterns).
Shadow Umbrella Down (unlike the body) – minimal shadow of a down \"Paper Umbrella\" candlestick relative to the body (for the Hammer and Hanging Man patterns).
Umbrella body min (tick) – minimum size of the body of a \"Paper Umbrella\" candlestick in ticks (for the Hammer and Hanging Man patterns).
Shadow difference Spinning Top – maximum difference between the shadows of \"Spinning Top\" (the parameter is greater than 1).
Spinning Top body min (tick) – minimum size of the body of the \"Spinning Top\" candlestick in ticks.
Shadow difference Doji – maximum acceptable difference between the shadows of \"Doji\" (the parameters is greater than 1).
Shadow Doji max (tick) – maximum size of the shadows of \"Doji\" in ticks.
Doji body max (tick) – maximal size of the body of \"Doji\" in ticks.
Shadow Gravestone Doji Down max (tick) – maximum acceptable lower shadow of the \"Gravestone Doji\" in ticks.
Shadow Doji Dragon Up max (tick) – maximum acceptable upper shadow of the \"Doji Dragon\" candlestick in ticks.
Shadow Doji Four Price max (tick) – maximum acceptable shadows of the \"Doji Four Price\" candlestick in ticks.
Body Long Candle min (tick) – minimal body of the \"Long\" candlestick in ticks.
Divergence Meeting Lines max (tick) – maximum of the \"Meeting Lines\" candlestick in ticks.
Shadow Maribozu Candle max (tick) – maximum acceptable shadows of the \"Maribozu\" candlestick in ticks.
Delete old objects – delete old object mentioned above.

Other settings are for enabling and disabling detection of the patterns.

", "url": "https://www.mql5.com/ko/market/product/677", "small_icon": "https://c.mql5.com/31/3/ACPD_Auto_Candlestick_Patterns_Detected_60x60.png", "middle_icon": "https://c.mql5.com/31/445/acpd-auto-candlestick-patterns-detected-logo-140x140-3952.png", "icon": "https://c.mql5.com/31/3/ACPD_Auto_Candlestick_Patterns_Detected.png", "rating": 0, "price": 100, "published": 1359556729, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 700, "title": "CloseByLossOrProfitTune", "description": "

CloseByLossOrProfitTune Expert Advisor closes a part of position as the total profit or loss for specified symbols reaches a specific value. The profit or loss level is specified in the deposit currency. In addition, the Expert Advisor can delete pending orders.

\r\n

Allow AutoTrading before running the Expert Advisor.

\r\n

Usage:

\r\n

Run the Expert Advisor on a chart.

\r\n

Input Parameters:

\r\n

Language of messages displayed (EN, RU, DE, FR, ES) - language of the output messages (English, Russian, German, French, Spanish);
Profit in the currency - profit in points;
Loss in the currency - loss in points;
Delete of pending orders - delete pending orders after closing all positions;
View comment - show comment;
Symbols for trading - symbols for tracking by the Expert Advisor;
Symbols delimetr - symbol separator;
Magic - magic number (if it is not equal to zero, the magic number will be considered when processing orders and positions);
\r\n
The number of tries to delete order - number of tries to delete an order or close a position (in case of requotes or other errors);
Slippage - slippage.

", "url": "https://www.mql5.com/ko/market/product/700", "small_icon": "https://c.mql5.com/31/3/marketBig__13_60x60.png", "middle_icon": "https://c.mql5.com/31/440/closebylossorprofittune-logo-140x140-3533.png", "icon": "https://c.mql5.com/31/3/marketBig__13.png", "rating": 0, "price": 30, "published": 1360225595, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 704, "title": "CloseByPercentLossOrProfitTune", "description": "

The CloseByPercentLossOrProfit Expert Advisor closes some positions as the total profit of loss for the entire account reaches a specified value. The profit or loss is specified as percentage of the account balance. In addition, the Expert Advisor can delete the pending orders.

\r\n

Allow AutoTrading before running the Expert Advisor.

\r\n

Instructions:

\r\n

Run the Expert Advisor on the chart.

\r\n

Input parameters:

\r\n

Language of messages displayed (EN, RU, DE, FR, ES) - the language of output messages (English, Russian, German, French, Spanish);
Profit in the percent - profit in percentage terms;
Loss in the percent - loss in percentage terms;
Delete of pending orders - delete pending orders after closing all positions;
View comment - show the comment;
Symbols for trading - symbols which the Expert Advisor works on;
Symbols delimetr - delimiter for symbols;
Magic - magic (if it is not equal to zero, the Expert Advisor considers magic on positions and orders);
The number of tries to delete order - the number of attempts to delete the order or close a position (in case of requotes or other errors);
Slippage - slippage.

", "url": "https://www.mql5.com/ko/market/product/704", "small_icon": "https://c.mql5.com/31/3/marketBig__15_60x60.png", "middle_icon": "https://c.mql5.com/31/440/closebypercentlossorprofittune-logo-140x140-7607.png", "icon": "https://c.mql5.com/31/3/marketBig__15.png", "rating": 0, "price": 30, "published": 1360581267, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 725, "title": "AABB Active Analyzer Bulls and Bears", "description": "

AABB - Active Analyzer Bulls and Bears is created to indicate the state to what extent a candlestick is bullish or bearish. The indicator shows good results on EURUSD H4 chart with default settings.

\r\n

The Strategy of the Indicator

\r\n

When the indicator line crosses 80% level upwards, we buy. When the indicator line crosses 20% level downwards, we sell.

\r\n

It is important to buy or sell when a signal candlestick is formed. You should buy or sell on the first signal. It is not recommended to buy more as well as to make new orders on further signals in the same direction.

\r\n

The signal candlestick must significantly overlap the previous candlestick, but doesn't have to do it completely.

\r\n

The Indicator Settings

The indicator settings are quite simple. You only should set data according to the size of candlesticks in ticks.

\r\n

BodyMiddle – maximum size of a medium body;
BodySmall – maximum size of a small body;
BodyZero – maximum size of the smallest body (usually 0 or 1);
ShadowUpMiddle – maximum size of a medium upper shadow;
ShadowUpSmall – maximum size of a small upper shadow;
ShadowUpZero – maximum size of the smallest upper shadow;
ShadowDownMiddle – maximum size of a medium lower shadow;
ShadowDownSmall – maximum size of a small lower shadow;
ShadowDownZero – maximum size of the smallest lower shadow.

", "url": "https://www.mql5.com/ko/market/product/725", "small_icon": "https://c.mql5.com/31/3/AABB_60x60.png", "middle_icon": "https://c.mql5.com/31/438/aabb-active-analyzer-bulls-and-bears-logo-140x140-5705.png", "icon": "https://c.mql5.com/31/3/AABB.png", "rating": 0, "price": 30, "published": 1360843869, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 746, "title": "Analyzer Signals", "description": "

The script is designed to analyze deals history of a signal exported to a csv-file from its page.

\r\n

The exported file of the studied signal must be placed in the terminal data folder\\MQL5\\FILES\\.

\r\n

The script displays deals for the current chart symbol to which it is applied. In a separate window a short trading report will be created either on the current symbol deals, or on all the deals. There is a possibility to save the report in an htm-file (Shift+H).

\r\n

The script parameters:

\r\n

signal csv-file name - name of the exported file (for example, \"4040.history.csv\");
time difference(hours) - time difference in hours between the signal provider and your terminal (shift of deals icons on price chart in hours).

", "url": "https://www.mql5.com/ko/market/product/746", "small_icon": "https://c.mql5.com/31/5/analyzer-signals-logo-60x60-8709.png", "middle_icon": "https://c.mql5.com/31/439/analyzer-signals-logo-140x140-9036.png", "icon": "https://c.mql5.com/31/5/analyzer-signals-logo-200x200-9418.png", "rating": 0, "price": 30, "published": 1361446091, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 748, "title": "Ticks Envelopes", "description": "

The Envelopes indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Averaging period - period of averaging.
Smoothing type - type of smoothing. Can have any values of the enumeration ENUM_MA_METHOD.
Option prices - price to be used. Can be Ask, Bid or (Ask+Bid)/2.
Deviation of boundaries from the midline (in percents) - deviation from the main line in percentage terms.
Price levels count - number of displayed price levels (no levels are displayed if set to 0).
Bar under calculation - number of bars on the chart for the indicator calculation.

\r\n

Buffer indexes: 0 - UPPER_LINE, 1 - LOWER_LINE, 2 - BID, 3 - ASK.

", "url": "https://www.mql5.com/ko/market/product/748", "small_icon": "https://c.mql5.com/31/4/Ticks_Envelopes_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-envelopes-logo-140x140-6347.png", "icon": "https://c.mql5.com/31/4/Ticks_Envelopes.png", "rating": 0, "price": 30, "published": 1361539706, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 752, "title": "Ticks RSI", "description": "

The Relative Strength Index indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

RSI Period - period of averaging.
overbuying level - overbought level.
overselling level - oversold level.
calculated bar - number of bars on the chart for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of RSI signals (from 0 to 100). You can find their description in the Signals of the Oscillator Relative Strength Index section of MQL5 Reference.

\r\n

The oscillator has required direction.
Reverse behind the level of overbought/oversold level.
Failed swing.
Divergence of the oscillator and price.
Double divergence of the oscillator and price.
Head/shoulders.

\r\n

Buffer indexes: 0 - RSI_LINE, 1 - SIGNAL_UP, 2 - SIGNAL_DOWN, 3 - BID, 4 - ASK.

", "url": "https://www.mql5.com/ko/market/product/752", "small_icon": "https://c.mql5.com/31/4/Ticks_RSI_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-rsi-logo-140x140-8200.png", "icon": "https://c.mql5.com/31/4/Ticks_RSI.png", "rating": 0, "price": 30, "published": 1361543657, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 753, "title": "Ticks ADX", "description": "

The Average Directional Movement Index indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period of averaging.
Сalculated bar - number of bars on the chart for the indicator calculation.

\r\n

Buffer indexes: 0 - MAIN_LINE, 1 - PLUSDI_LINE, 2 - MINUSDI_LINE.

", "url": "https://www.mql5.com/ko/market/product/753", "small_icon": "https://c.mql5.com/31/4/Ticks_ADX_60x60.png", "middle_icon": "https://c.mql5.com/31/440/ticks-adx-logo-140x140-3620.png", "icon": "https://c.mql5.com/31/4/Ticks_ADX.png", "rating": 0, "price": 30, "published": 1361540564, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 768, "title": "Ticks MACD", "description": "

The Moving Average Convergence/Divergence(MACD) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Fast EMA period - indicator drawn using a tick chart.
Slow EMA period - slow period of averaging.
Signal SMA period - period of averaging of the signal line.
calculated bar - number of bars on the chart for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of MACD signals (from 0 to 100). You can find their description in the Signals of the MACD oscillator section of MQL5 Reference.

\r\n

The oscillator has required direction.
Reverse of the oscillator to required direction.
Crossing of the main and signal line.
Crossing of the main line and the zero level.
Divergence of the oscillator and price.
Double divergence of the oscillator and price.
\r\n

\r\n

Buffer indexes: 0 - MACD_LINE, 1 - SIGNALLINE, 4- SIGNAL_UP, 5- SIGNAL_DOWN.

", "url": "https://www.mql5.com/ko/market/product/768", "small_icon": "https://c.mql5.com/31/4/MACD_tick_200_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-macd-logo-140x140-9610.png", "icon": "https://c.mql5.com/31/4/MACD_tick_200.png", "rating": 0, "price": 30, "published": 1362043375, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 769, "title": "Ticks Stochastic", "description": "

The Stochastic Oscillator indicator is drawn on the tick price chart.

\r\n

After launching it, wait for enough ticks to come.

\r\nParameters:\r\n

K period - number of single periods used for calculation of the stochastic oscillator;
D period - number of single periods used for calculation of the %K Moving Average line;
Slowing - period of slowing %K;
Calculated bar - number of bars in the chart for calculation of the indicator.

\r\n

The following parameters are intended for adjusting the weight of signals of the Stochastic oscillator (0 - 100). Their description can be found in MQL5 Reference in the section Signals of the Oscillator Stochastic.

\r\n

The oscillator has required direction.
Reverse of the oscillator to required direction.
Crossing of main and signal line.
Divergence of the oscillator and price.
Double divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - MACD_LINE, 1 - SIGNALLINE, 2 - SIGNAL_UP, 3 - SIGNAL_DOWN.

", "url": "https://www.mql5.com/ko/market/product/769", "small_icon": "https://c.mql5.com/31/4/Ticks_Stochastic_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-stochastic-logo-140x140-4890.png", "icon": "https://c.mql5.com/31/4/Ticks_Stochastic.png", "rating": 0, "price": 30, "published": 1362060685, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 771, "title": "Ticks CCI", "description": "

The Commodity Channel Index(CCI) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

period - number of single periods used for the indicator calculation.
calculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of CCI signals (from 0 to 100). You can find their description in the Signals of the Commodity Channel Index section of MQL5 Reference.

\r\n

The oscillator has required direction.
Reverse behind the overbought/oversold level.
Divergence of the oscillator and price.
Double divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - CCI_LINE, 1 - SIGNAL_UP, 2 - SIGNAL_DOWN.

", "url": "https://www.mql5.com/ko/market/product/771", "small_icon": "https://c.mql5.com/31/4/Ticks_CCI_60x60.png", "middle_icon": "https://c.mql5.com/31/440/ticks-cci-logo-140x140-5502.png", "icon": "https://c.mql5.com/31/4/Ticks_CCI.png", "rating": 0, "price": 30, "published": 1362041255, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 772, "title": "Ticks OsMA", "description": "

The Moving Average of Oscillator(OsMA) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Fast EMA period - fast period of averaging.
Slow EMA period - slow period of averaging.
Signal SMA period - period of averaging of the signal line.
calculated bar - number of bars for the indicator calculation.

", "url": "https://www.mql5.com/ko/market/product/772", "small_icon": "https://c.mql5.com/31/4/Ticks_OsMA_60x60.png", "middle_icon": "https://c.mql5.com/31/440/ticks-osma-logo-140x140-1466.png", "icon": "https://c.mql5.com/31/4/Ticks_OsMA.png", "rating": 0, "price": 30, "published": 1362040394, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 774, "title": "Tick StdDev", "description": "

The Standard Deviation (StdDev) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\nParameters:\r\n

Period - period of averaging.
Method - method of averaging.
calculated bar - number of bars for the indicator calculation.

", "url": "https://www.mql5.com/ko/market/product/774", "small_icon": "https://c.mql5.com/31/4/Tick_StdDev_60x60.png", "middle_icon": "https://c.mql5.com/31/440/tick-stddev-logo-140x140-1550.png", "icon": "https://c.mql5.com/31/4/Tick_StdDev.png", "rating": 0, "price": 30, "published": 1362041546, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 775, "title": "Instruments Relativeness", "description": "

This indicator is used to compare the relative strength of the trade on the chart against the other two selected symbols.

By comparing the price movement of each traded variety based on the same base day, three trend lines of different directions can be seen, reflecting the strong and weak relationship between the three different traded varieties, so that we can have a clearer understanding of the market trend.

For example, you can apply this indicator on a EurUSD chart and compare it with currency pairs EurJPY and EurGBP to see which is stronger.

You need to enter parameters for the indicator:

You can enter the names of two trading varieties for comparison.

You need to select a base date for comparison.

Please note that you should ensure that the historical data of the relevant trading varieties has been downloaded before using the indicator.

The free demo version is: https://www.mql5.com/en/market/product/63888

", "url": "https://www.mql5.com/ko/market/product/775", "small_icon": "https://c.mql5.com/31/581/instruments-relativeness-logo-60x60-6908.png", "middle_icon": "https://c.mql5.com/31/581/instruments-relativeness-logo-140x140-2024.png", "icon": "https://c.mql5.com/31/581/instruments-relativeness-logo-200x200-1812.png", "rating": 0, "price": 30, "published": 1362039444, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 776, "title": "Ticks Momentum", "description": "

The Momentum indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

period - period of the indicator calculation.
levels count - number of displayed levels (no levels are displayed if set to 0)
calculated bar - number of bars for the indicator calculation.

", "url": "https://www.mql5.com/ko/market/product/776", "small_icon": "https://c.mql5.com/31/4/Ticks_Momentum_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-momentum-logo-140x140-5601.png", "icon": "https://c.mql5.com/31/4/Ticks_Momentum.png", "rating": 0, "price": 30, "published": 1362054193, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 780, "title": "Trade Area", "description": "

Most time the market is in a small oscillation amplitude. The Trade Area indicator helps users to recognize that time.

\r\n

There are 5 lines in this indicator: Area_high, Area_middle, Area_Low, SL_high and SL_low.

\r\n

Recommendations:

\r\n

When price is between Area_high and Area_Low, it's time to trade.
Buy at Area_Low level and sell at Area_high level. The SL_high and SL_low lines are the levels for Stop Loss.
Change the Deviations parameter to adjust SL_high and SL_low.

", "url": "https://www.mql5.com/ko/market/product/780", "small_icon": "https://c.mql5.com/31/4/Trade_Area_60x60.png", "middle_icon": "https://c.mql5.com/31/439/trade-area-logo-140x140-8647.png", "icon": "https://c.mql5.com/31/4/Trade_Area.png", "rating": 0, "price": 30, "published": 1362387485, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 781, "title": "Digitized Candle Length", "description": "

This indicator is used to indicate the difference between the highest and lowest prices of the K line, as well as the difference between the closing price and the opening price, so that traders can visually see the length of the K line.\r\n

\r\n

\r\nThe number above is the difference between High and Low, and the number below is the difference between Close and Open.\r\n\r\n

\r\n

This indicator provides filtering function, and users can only select K lines that meet the criteria, such as positive line or negative line.

", "url": "https://www.mql5.com/ko/market/product/781", "small_icon": "https://c.mql5.com/31/4/Digitized_Candle_Length_60x60.png", "middle_icon": "https://c.mql5.com/31/445/digitized-candle-length-logo-140x140-4923.png", "icon": "https://c.mql5.com/31/4/Digitized_Candle_Length.png", "rating": 0, "price": 30, "published": 1362385203, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 785, "title": "Ticks Bulls", "description": "

The Bulls Power indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period of averaging.
The number of ticks to identify high/low - number of single ticks for determining high/low.
Calculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of Bulls Power signals (from 0 to 100). You can find their description in the Signals of the Bulls Power oscillator section of MQL5 Reference.

\r\n

Reverse of the oscillator to required direction.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - Bulls, 3 - SIGNAL VALUE

", "url": "https://www.mql5.com/ko/market/product/785", "small_icon": "https://c.mql5.com/31/4/Ticks_Bulls_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-bulls-logo-140x140-6697.png", "icon": "https://c.mql5.com/31/4/Ticks_Bulls.png", "rating": 0, "price": 30, "published": 1362495742, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 786, "title": "Ticks Bears", "description": "

The Bears Power indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period of averaging.
The number of ticks to identify high/low - number of single ticks for determining high/low.
Calculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of Bears Power signals (from 0 to 100). You can find their description in the Signals of the Bears Power oscillator section of MQL5 Reference.

\r\n

Reverse of the oscillator to required direction.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - Bears, 3 - SIGNAL VALUE

", "url": "https://www.mql5.com/ko/market/product/786", "small_icon": "https://c.mql5.com/31/4/Ticks_Bears_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-bears-logo-140x140-2134.png", "icon": "https://c.mql5.com/31/4/Ticks_Bears.png", "rating": 0, "price": 30, "published": 1362495964, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 814, "title": "DWMACD", "description": "

DWMACD - Divergence Wave MACD. The indicator displays divergences by changing the color of the MACD histogram. The indicator is easy to use and configure.

For the calculation, a signal line or the values of the standard MACD histogram can be used. You can change the calculation using the UsedLine parameter. It is advisable to use a signal line for calculation if the histogram often changes directions and has small values, forming a kind of flat. To smooth the histogram values set the signal line at UsedLine and a small period (2-5). As the period increases, the indicator lags behind the price (which applies to any indicator).

The indicator is calculated at the current price (close).

You can use your own moving average values in the settings. It is possible to use 4 standard types of moving averages (SMA, EMA, LWMA, SMMA). The CONST type is also introduced - this is a straight line (constant value). When using CONST, the value is taken from the period of the specified line. You cannot use CONST to build the MACD itself. Can only be used when drawing a terminator line. The terminator line divides the histogram into upper and lower parts. In the standard MACD, this is the zero line. Those. if you want to use standard values with a zero terminator, use the CONST for the terminator line with a period of 0. In this indicator, the terminator can be a moving average calculated from the base calculated line specified in the UsedLine parameter. Accordingly, the divergence is calculated as the difference in the deviation of adjacent unidirectional peaks from the terminator line.

The signals of this indicator are divergence signals. This is not necessarily a reversal, but definitely a weakening of the trend. With other positive conditions, it is worth entering the market using this indicator when the terminator line is broken by a divergent wave, expecting a long trend. It is also possible that the emerging divergence is not justified and the price continues to move. On the histogram, this will look like the color of the divergence, replaced by the color of a simple movement. In this case, the price movement will continue at least one more wave (as a rule).

The divergence colors correspond to the intuitive: blue - looking for purchases, red - sales.

Note: the next divergence cancels the previous one!

In my opinion, the indicator demonstrates the best results with default settings, but you can find parameters more suitable for you.

Have a successful trading!

", "url": "https://www.mql5.com/ko/market/product/814", "small_icon": "https://c.mql5.com/31/4/DWMACD__1_60x60.png", "middle_icon": "https://c.mql5.com/31/440/dwmacd-logo-140x140-8074.png", "icon": "https://c.mql5.com/31/4/DWMACD__1.png", "rating": 0, "price": 30, "published": 1363173095, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 818, "title": "Ticks Heiken Ashi", "description": "

The Heiken Ashi indicator drawn using a tick chart. It draws synthetic candlesticks that contain a definite number of ticks.

\r\n

Parameters:

\r\n

option prices - price option. It can be Bid, Ask or (Ask+Bid)/2.
the number of ticks to identify Bar - number of ticks that form candlesticks.
price levels count - number of displayed price levels (no levels are displayed if set to 0 or a lower value).
calculated bar - number of bars on the chart.

\r\n

Buffer indexes: 0 - OPEN, 1 - HIGH, 2 - LOW, 3 - CLOSE.

", "url": "https://www.mql5.com/ko/market/product/818", "small_icon": "https://c.mql5.com/31/4/Ticks_Heiken_Ashi_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-heiken-ashi-logo-140x140-5115.png", "icon": "https://c.mql5.com/31/4/Ticks_Heiken_Ashi.png", "rating": 0, "price": 30, "published": 1363337897, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 820, "title": "Ticks Price Channel", "description": "

The Price Channel indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period for determining the channel boundaries.
Price levels count - number of displayed price levels (no levels are displayed if set to 0).
Bar under calculation - number of bars on the chart for the indicator calculation.

\r\n

Buffer indexes: 0 - Channel upper, 1 - Channel lower, 2 - Channel median.

", "url": "https://www.mql5.com/ko/market/product/820", "small_icon": "https://c.mql5.com/31/4/Ticks_Price_Channel_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-price-channel-logo-140x140-9205.png", "icon": "https://c.mql5.com/31/4/Ticks_Price_Channel.png", "rating": 0, "price": 30, "published": 1363705892, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 821, "title": "Ticks WPR", "description": "

The Williams' Percent Range (%R) indicator drawn using a tick chart. After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

WPR Period - period of the indicator.
Overbuying level - overbought level.
Overselling level - oversold level.
Сalculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of WPR signals (from 0 to 100). You can find their description in the Signals of the Williams Percent Range section of MQL5 Reference.

\r\n

The oscillator has required direction.
Reverse behind the level of overbuying/overselling.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - WPR, 1 - SIGNAL_UP, 2 - SIGNAL_DOWN.

", "url": "https://www.mql5.com/ko/market/product/821", "small_icon": "https://c.mql5.com/31/4/Ticks_WPR_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-wpr-logo-140x140-8288.png", "icon": "https://c.mql5.com/31/4/Ticks_WPR.png", "rating": 0, "price": 30, "published": 1363706732, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 827, "title": "Ticks ATR", "description": "

The Average True Range (ATR) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

ATR Period - number of single periods used for the indicator calculation.
The number of ticks to identify Bar - number of single ticks that form OHLC.
Price levels count - number of displayed price levels (no levels are displayed if set to 0 or a lower value).
Сalculated bar - number of bars for the indicator calculation.

", "url": "https://www.mql5.com/ko/market/product/827", "small_icon": "https://c.mql5.com/31/4/Ticks_ATR_60x60.png", "middle_icon": "https://c.mql5.com/31/445/ticks-atr-logo-140x140-3815.png", "icon": "https://c.mql5.com/31/4/Ticks_ATR.png", "rating": 0, "price": 30, "published": 1363706235, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 919, "title": "Historical Memory B150", "description": "

The B150 model is a fully revised version of the Historical Memory indicator with a significantly improved algorithm. It also features a graphical interface what makes working with this perfect tool quick and convenient.

Indicator-forecaster. Very useful as an assistant, acts as a key point to forecast the future price movement.

The forecast is made using the method of searching the most similar part in the history (patter). The indicator is drawn as a line that shows the result of change of the close price of bars. Now you can visually find and compare the quality of a history pattern with an actual pattern. In addition, the indicator is capable of forecasting by analyzing several patterns at once.

Input parameters

Forecast

Prediction Freeze - allows to freeze displayed forecast.
Layers Show Mode - layer display mode: SHOW_ALL_LAYERS - all layers will be shown as separate lines; SHOW_AVERAGE - a multi-layer view as a smoothed line.
Show All Backward Lines - backward lines of all layers will be displayed.
Pattern: Size(in bars)[1...] - the size of the pattern in bars.
Prediction: the number of bars [1...] - the number of bars used for the forecast.
Searching: depth of history(in bars)(0 - all bars) - the depth of the history used to search for the best correlation.
Searching: Step(in bars) - search step: the higher step value provides a higher speed with a lower search quality.
Prediction: Layers total [1...20] - the number of layers: the more layers, the greater the variability of the forecast.
Searching: Start bar shift (in history) - shift of the bar from which the forecast begins.

Graphics

Objects Name Prefix - prefix name of the graphic objects.

", "url": "https://www.mql5.com/ko/market/product/919", "small_icon": "https://c.mql5.com/31/4/Historical_Memory_B150__1_60x60.png", "middle_icon": "https://c.mql5.com/31/445/historical-memory-b150-logo-140x140-5838.png", "icon": "https://c.mql5.com/31/4/Historical_Memory_B150__1.png", "rating": 5, "price": 40, "published": 1365677068, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 1027, "title": "Flet scalper", "description": "

Tick channel scalper for flat markets or for markets with frequent pullbacks.

The robot is set to EURAUD.

Brokers with minimal spreads and commissions are recommended. For example Rannforex.com or ICMarkets.com

The EA has a unique algorithm that works on ticks and does not depend on the timeframe.

Opening hours are configurable. Trading is possible both at any time period and around the clock.

File for optimisations and test on Tester include in my blog - https://www.mql5.com/ru/blogs/post/741312

", "url": "https://www.mql5.com/ko/market/product/1027", "small_icon": "https://c.mql5.com/31/495/flet-scalper-logo-60x60-4175.png", "middle_icon": "https://c.mql5.com/31/495/flet-scalper-logo-140x140-6996.png", "icon": "https://c.mql5.com/31/495/flet-scalper-logo-200x200-5323.png", "rating": 0, "price": 1250, "published": 1597799450, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 1034, "title": "Good Time", "description": "

Indicator for Highlighting Any Time Periods such as Trade Sessions or Week Days

We do we need it? Looking through the operation results of my favorite Expert Advisor in the strategy tester I noticed that most deals it opened during the Asian session were unprofitable. It would be a great idea to see it on a graph, I thought. And that was the time I bumped into the first problem - viewing only the Asian session on a chart. And hiding all the others. It is not a problem to find the work schedule of exchanges in Tokyo or Singapore, but how to highlight their operation time only and nothing else?

The second problem appeared later. For some reason all the deals performed on Thursdays were unprofitable, while on the other days everything went good. What was wrong with Thursdays so that my Expert Advisor couldn't cope with them? I started analyzing the situation, and so I needed to highlight all Thursdays on a chart. This was the second problem.

The third problem appeared when I decided to compare the price behavior between two sessions. I thought that the American session was somehow connected with the Asian one, so I needed to highlight both of them and remove all the rest. And that was the third problem.

Comparing these problems, I had come to a decision to start doing something, so I started developing an indicator that would solve all these problems. That is how the GoodTime indicator appeared.

GoodTime:

highlights any time periods, for example, sessions;
can highlight a selected day only, for example, Thursday;
adds a caption to every highlighted period, for example, \"Tokio THU\";
highlights bars, candlesticks or lines automatically tracking the representation type selected for your chart;
highlights selected interval with vertical filling;
or by underlining;
or searches for a minimum and maximum value of the price at a selected time range and then highlights the range between the minimum and the maximum point.

Several instances of the GoodTime indicator can work on the same chart at the same time; they will highlight different periods. Thus you can highlight two trade sessions and compare them with each other.

GoodTime can be used for making statements and screenshots, where you can draw attention to specific bars or candlesticks on a chart. You can use it for analyzing Expert Advisors by highlighting trade sessions and week days on a chart for further examination.

GoodTime is also suitable for manual trading as it highlights the work time of your colleagues located in other time zones and general trade sessions.

You can always download a demo version of the indicator before purchasing it.

Wish you fair trends and may the luck be with you!

", "url": "https://www.mql5.com/ko/market/product/1034", "small_icon": "https://c.mql5.com/31/5/good-time-logo-60x60-4608.png", "middle_icon": "https://c.mql5.com/31/446/good-time-logo-140x140-1223.png", "icon": "https://c.mql5.com/31/5/good-time-logo-200x200-1423.png", "rating": 0, "price": 30.7, "published": 1371475777, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1051, "title": "Color Candles Identify the Major Trend", "description": "

표시기는 두 부분으로 구성됩니다.

1부: 색상 양초가 주요 추세를 보여줍니다.

컬러 캔들(Color Candles)은 컬러 캔들스틱으로 시장 상태를 파악하는 것입니다.

스크린샷에서 보듯이, 색상이 아쿠아(Aqua)라면 시장은 매수 주문을 해야 하거나 매도 주문을 종료해야 하는 상태입니다. 색상이 토마토라면 짧은 주문을 하거나 긴 주문을 종료할 때입니다.

색상이 변경되는 경우 완료될 때까지 기다리는 것이 좋습니다(현재 막대가 닫힐 때까지).

파트 II: 밴드 그리기

안쪽 밴드는 안전 구역으로 정의되고, 바깥쪽 밴드는 마감 주문용으로 정의됩니다.

아래와 같은 거래 전략:

색상이 아쿠아이고 가격이 내부 밴드에 있는 경우 장기 주문을 하고, 가격이 외부 밴드를 넘으면 주문을 마감할 시간입니다.
색상이 토마토이고 가격이 안쪽 밴드에 있으면 짧은 주문을 하고, 가격이 바깥쪽 밴드를 넘으면 주문을 마감할 시간입니다.

참고 : 가격이 내부 밴드에 있을 때 진입 시장에만 해당됩니다. 이는 매우 중요합니다.

입력 매개변수

ShowColorCandle - true는 표시기가 색상 캔들을 그리는 것을 의미합니다.
AlertColorChange - true는 색상 변경이 완료되면 경고가 발생함을 의미합니다.
EmailColorChange - true는 색상 변경이 완료되면 이메일이 전송된다는 의미입니다.
ShowBands - true는 표시기가 밴드를 그리는 것을 의미합니다.
AlertCrossOuterBands - 진정한 남성이라면 가격이 외부 밴드를 넘을 때 경고를 받을 것입니다.
AlertCrossOuttrBands - true는 가격이 외부 밴드를 넘을 때 이메일이 전송된다는 의미입니다.

MT4 버전: https://www.mql5.com/ko/market/product/10455

", "url": "https://www.mql5.com/ko/market/product/1051", "small_icon": "https://c.mql5.com/31/140/color-candles-identify-the-major-trend-logo-60x60-9345.png", "middle_icon": "https://c.mql5.com/31/438/color-candles-identify-the-major-trend-logo-140x140-4973.png", "icon": "https://c.mql5.com/31/140/color-candles-identify-the-major-trend-logo-200x200-6313.png", "rating": 0, "price": 30, "published": 1369130978, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1089, "title": "Auto Format", "description": "

This is an utility for automatic scaling of a chart and making at least 140 bars visible in it. This is necessary for a correct wave analysis according to the Bill Williams' strategy \"Trading Chaos\". The utility can be used on any timeframe available in МetaТrader 5.

\r\n

It draws a vertical line through the first bar the calculation starts from. This line allows you to see the probable starting point of the wave sequence along with a sufficient number of bars displayed in the chart. It also makes the wave labeling easier for the price history of an instrument displayed on the selected timeframe.

The indicator can automatically choose a required lower timeframe considering 140-150 bars that should be displayed. To do it, select the required area on the chart using a rectangle and then double click with the mouse on a line of the rectangle. The indicator will automatically choose a required timeframe for the wave analysis. To return to the initial timeframe, click the corresponding button in the MetaTrader 5 interface, and to delete objects use \"Delete\".

\r\n

It is recommended to save the indicator in a template together with the other standard Bill Williams' indicators included in the MetaTrader 5 package or with their analogs available in the MQL5 Market. Namely the following:

\r\n

", "url": "https://www.mql5.com/ko/market/product/1089", "small_icon": "https://c.mql5.com/31/5/auto-format-logo-60x60-2955.png", "middle_icon": "https://c.mql5.com/31/445/auto-format-logo-140x140-4780.png", "icon": "https://c.mql5.com/31/5/auto-format-logo-200x200-4876.png", "rating": 0, "price": 60, "published": 1370333821, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 1162, "title": "Account Info and Max Lot", "description": "

The script displays the following information:

\r\n

Maximum possible lot for a Buy or Sell deal at the moment;
Daily, weekly, monthly and yearly profit;
Maximal and minimal lot allowed by dealer;
Account type (real, demo);
The number of open positions and orders.
Swap (long and shoet),
текущий инструмент,
текущее плечо,
уровень Stop (stop level).
Tick value and Pip value.

", "url": "https://www.mql5.com/ko/market/product/1162", "small_icon": "https://c.mql5.com/31/6/account-info-and-max-lot-logo-60x60-7849.png", "middle_icon": "https://c.mql5.com/31/439/account-info-and-max-lot-logo-140x140-7143.png", "icon": "https://c.mql5.com/31/6/account-info-and-max-lot-logo-200x200-1963.png", "rating": 0, "price": 30, "published": 1372168011, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 1184, "title": "SignalFinder", "description": "

SignalFinder is a multicurrency indicator displaying trend direction for several currency pairs and time frames on a single chart.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is defined at the last complete bar.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs.
TimeFrames - time periods (time frames).

\r\n

Currency pairs and time frames are separated by comma in the list.

\r\n If a currency pair or a time frame does not exist or is mistyped, it is marked in crimson in the table.
\r\n

\r\n

Indicator Signals:

\r\n

blue up arrow - the last complete candlestick is a bullish one.
red down arrow - the last complete candlestick is a bearish one.
gray dot - open price is equal to close one of the last complete bar.

", "url": "https://www.mql5.com/ko/market/product/1184", "small_icon": "https://c.mql5.com/31/6/signalfinder-logo-60x60-9538.png", "middle_icon": "https://c.mql5.com/31/439/signalfinder-logo-140x140-7744.png", "icon": "https://c.mql5.com/31/6/signalfinder-logo-200x200-2743.png", "rating": 0, "price": 30, "published": 1373624903, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1222, "title": "Actual Tick Footprint Volume Chart", "description": "

This new unique indicator Actual tick footprint (volume chart) is developed for using on Futures markets, and it allows seeing the volume of real deals right when they are performed. The indicator Actual tick footprint (volume chart) represents a greatly enhanced tick chart that includes additional information about the volume of deal performed at a specific price. In addition, this unique indicator for MetaTrader 5 allows to clearly detecting a deal type – buy or sell.

Alike the standard tick chart, the indicator draws three lines in the window:

\r\n

Bid line.
Ask line.
Last line. Circles with digits displayed on it indicate the volume of a deal performed at the given price. The size of circles is proportional to the volume of deals, and the color is for the type of deals. Red circle indicates that a deal has been performed by the Bid price (interpreted as Sell), and green circle indicates that a deal has been performed by the Ask price (interpreted as Buy).

\r\n

Information provided by this indicator is essential for scalping on Futures markets as it allows detecting many patterns and get information which is not available to ordinary traders. For example:

\r\n

Deals with extremely high volume. Further, the price of that deals will probably be a resistance level.
Deals of what type are performed in a given range - Buy or Sell. It allows estimating a direction of exiting from accumulation.
Behavior of traders during an impulse and passing a level - whether everybody buys or sells at a sharp change of the price?
… and many other situations.

\r\n

The indicator includes the built-in system of filtration, and it displays only new deals that are performed at a changed price or with a greater volume. 1 lot deals are displayed but they don't have captions on the chart; it allows concentration on main information.

\r\n

I recommend attaching the indicator Actual tick footprint (volume chart) to М1 or М5 chart and the selecting the best scale. It will allow taking optimal decisions when scalping and when searching for an optimal entry to the market on a longer period.

\r\n

To understand the behavior of participants of the market and to interpret the volumes, I recommend using this indicator together with my other development – the product Actual depth of market chart which displays the market depth histogram.

\r\n

The parameters of the indicator allow setting up the chart appearance:

\r\n

Ticks on chart – number of last displayed deals.
Scale in pips – height of the vertical scale in points. You should adjust the value considering the current volatility.
Color volume buy – color of a buy deal marker.
Color volume sell – color of a sell deal marker.
Color label – color of a volume caption on a deal marker.

\r\n

Pay attention to the following features:

\r\n

The indicator will not work in the strategy tester, only on a real market. You can see how it works on the video.
The indicator will work only on the instruments with real volumes of deals available. First of all, it will be interesting for trades on the FORTS market and other stock markets accessible through MetaTrader 5.
The indicator displays information only when it is launched. The indicator cannot display information for the time before it was started.

", "url": "https://www.mql5.com/ko/market/product/1222", "small_icon": "https://c.mql5.com/31/6/actual-tick-footprint------volume-chart-logo-60x60-6015.png", "middle_icon": "https://c.mql5.com/31/439/actual-tick-footprint-volume-chart-logo-140x140-8859.png", "icon": "https://c.mql5.com/31/6/actual-tick-footprint------volume-chart-logo-200x200-9902.png", "rating": 2.3333333, "price": 30, "published": 1373969893, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 1239, "title": "UniversalTrader", "description": "

Universal Trader (UT)

\r\n\r\n\r\n

\r\n

This EA is part of the RPTrade Pro Solutions systems.

\r\n\r\n\r\n

\r\n

UT is a trading robot using a trend and oscillator indicators.

\r\n\r\n\r\n

It's designed to be used by anyone, even the absolute beginner in trading can use it.
Designed for every TimeFrames
Uses Takes Profit, Stop Loss and Trailing stop.
Can also work as a switch without SL/TP
Works with any pairs

\r\n\r\n\r\n

How does it work

\r\n\r\n\r\n

UT is a trend follower.
It's using A build in Supertrend Indicator to find trades entries and Parabolic SAR to Stop/ trail/BreakEven positions
Trades are stopped either by TP/SL/TS or by the next opposite Trade to come.
No hedging, no averaging.
A trade must end before the next can start.
UT controls each ticks or each bars, it can be optimized in real ticks or open price.

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n

Testing

\r\n\r\n\r\n

\r\n

Must be optimized before testing. A full description and tutoriel will be (soon) provided at its dedicated support \r\n site.

\r\n

\r\n\r\n\r\n

Inputs

\r\n\r\n\r\n

IsMicroAccount: [bool]

True will set the minimum lotsize at 0.01
False will set the minimum lotsize at 0.1

CompletedBars: [bool]

True will trade only at a new bar opening (Open price mode)
False will trade Every tick

GlobalTimeFrame: [ENUM TIMEFRAME] Select the Time frame of the whole EA
FiveDigits: [bool]

True for 5 digits accounts
False for 4 digits accounts (not recommended)

UseWeekDay: [bool]

True will enable week day selection
False will trade every day of the week

Sunday: [bool]:

True Enables trading for Sunday
False Disable trading for Sunday

Same use for next days of the week
UseTradingTime: [bool]

True Enables trading time
False Disables trading time, the EA will trade at any time.

TradingTimeStart: [integer] Enables trading from this time.
TradingTimeEnd: [integer] Disables trading at this time (trades till the hour is over).
CloseTradesAtTradingTimeEnd: [bool]

True will close all remaining trades at TradingTimeEnd
False will let the trade run over the non trading period.

ManageOpenedTradeDuringTimeOff: [bool]

True will check trailing stop or other stop conditions during non trading period
False will just do nothing during non trading period.

MaxVolumePosition: [double] Maximum volume for one position (can include several deals).
MaximumPercentageAtRisk: [double] Will calculate lot size according to this parameter. Example: 1% risk for 1000€/$ equity = \r\n 0.01 lot.
UseLotManagement:[bool]

True enables Lot Management
False disables Lot Management

LotManagementType [int] 1 or 2

1= Uses Decrease factor
2= Uses a fix factor 75%,50%,25%

ReductionFactor:[double] for money management lot-(lot*losses/ReductionFactor)

DecreaseLotAfterLoss: [integer] For lot management 1, it waits until DecreaseLotAfterLoss consecutive loses to \r\n reduce lot size
LotPerTrade: [double] Maximum lot size for one trade
Take Profit: [double] Take Profit value in pips.
Stop Loss: [double] Stop Loss value in pips.
Trailing Stop: [double] Trailing stop value in pips.
Use Psar To Set SL and TS: [bool]

True will enable Parabolic SAR to set Stop Loss and Trailing stop.
False will use Stop Loss and Trailing Stop fixed inputs if any.

Magic Number Long: [integer] Unique ID for the EA to manage its long trades only.
Magic Number Short: [integer] Unique ID for the EA to manage its short trades only.
TF: [ENUM TIMEFRAMES] Time Frame for the indicators, may differ from EA's Timeframe.
BarsToWait: [integer] Number of bars to wait before to take a trade after the signals confirmed the entry.
cci: [double] CCI Period for SuperTrend indicator
ChannelHeight: [integer] False entry signal filter, defines a CCI channel height where no trades must be taken. \r\n Useful for ranging market.
SARP: [double] SARP parameter of Parabolic SAR indicator.
UseBreakEven: [bool]

True will enable breakeven
False will disable breakeven

SetBreakEvenAtXEarnedPips [double] Breakeaven will be set once X profit pips will be reached.
AddXPipsToBreakEven: [double] Will add X profit pips to breakeven.
ResetOrder: [bool]

True will not wait for an opposite trade, take a trade in any direction when signal is given. (can take a buy after a buy and a \r\n sell after a sell)
False will make the EA wait for an opposite trade (after a sell can only come a buy and vice versa)

StopCrossReverse: [bool]

True will stop a trade when the price is crossing the SuperTrend line reverse
False will just do nothing.

\r\n

", "url": "https://www.mql5.com/ko/market/product/1239", "small_icon": "https://c.mql5.com/31/6/universaltrader-logo-60x60-7055.png", "middle_icon": "https://c.mql5.com/31/442/universaltrader-logo-140x140-9904.png", "icon": "https://c.mql5.com/31/6/universaltrader-logo-200x200-8504.png", "rating": 4.6363635, "price": 299, "published": 1374162824, "popularity": 0, "category": "Expert", "votes": 11 }, { "id": 1265, "title": "SignalFinder One Timeframe", "description": "

SignalFinder One Timeframe is a multicurrency indicator similar to SignalFinder. On a single chart it displays trend direction on the currently select timeframe of several currency pairs. The trend direction is displayed on specified bars.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is detected on a selected bar.
This version is optimized to decrease the resource consumption.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs (duplicates are deleted).
Bars - numbers of bars to detect trends (duplicates are deleted).
Ranking - enable/disable ranking.

\r\n

Ranking is sorting currency pairs on the basis of the stability of a signal. Calculation in a row is done from right to left.

\r\n

Currency pairs and time frames are separated by comma in the list. If a currency pairs or a timeframe does not exist or specified incorrectly, it will be highlighted with a crimson color in the table.

\r\n

The maximum bar number is 99. Values of bars with greater numbers are not displayed in the table.

\r\n

Indicator Signals:

\r\n

Blue arrow up - the specified candlestick is bullish.
Red arrow down - the specified candlestick is bearish.
Gray dot - the open price is equal to the close price of the specified bar.
Yellow dot - loading history.

", "url": "https://www.mql5.com/ko/market/product/1265", "small_icon": "https://c.mql5.com/31/6/signalfinder-one-timeframe-logo-60x60-8345.png", "middle_icon": "https://c.mql5.com/31/442/signalfinder-one-timeframe-logo-140x140-7313.png", "icon": "https://c.mql5.com/31/6/signalfinder-one-timeframe-logo-200x200-6057.png", "rating": 0, "price": 30, "published": 1375283273, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1274, "title": "Trade Magic", "description": "

Another script for opening orders and positions that features the possibility to set a comment and a magic number.

\r\n

Parameters:

\r\n

Magic - magic number.
Comment - comment for an order or position.
OrdType - type of the order or position (Buy, Sell, BuyLimit, SellLimit, BuyStop, SellStop, BuyStopLimit, SellStopLimit).
Lot - request volume of the order.
Price - price at which the order should be executed.
LimitPrice - price that will be used for a Stop Limit order.
SL - Stop Loss price (loss control).
TP - Take Profit price (fixing profit).

", "url": "https://www.mql5.com/ko/market/product/1274", "small_icon": "https://c.mql5.com/31/6/trade-magic-logo-60x60-7200.png", "middle_icon": "https://c.mql5.com/31/440/trade-magic-logo-140x140-5349.png", "icon": "https://c.mql5.com/31/6/trade-magic-logo-200x200-6945.png", "rating": 0, "price": 30, "published": 1375197744, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 1398, "title": "PZ Wolfe Waves MT5", "description": "

Precision trading: leverage wolfe waves for accurate signals

Wolfe Waves are naturally occurring trading patterns present in all financial markets and represent a fight towards an equilibrium price. These patterns can develop over short and long-term time frames and are one of the most reliable predictive reversal patterns in existence, normally preceding strong and long price movements.

[ Installation Guide | Update Guide | Troubleshooting | FAQ | All Products ]

Clear trading signals
Amazingly easy to trade
Customizable colors and sizes
Implements performance statistics
Displays suitable stop-loss and take-profit levels
It implements email/sound/visual alerts

The indicator draws the pattern and the breakout arrow simultaneously to prevent the indicator from repainting the pattern as it expands. However, it might repaint sparingly -not very often-, if the entry breakout happens many times, causing the indicator to re-draw. The indicator is non-backpainting.

Definition of Wolve Wave

A wolfe wave must have the following characteristics. (Click here to see an example)

Waves 3-4 must stay within the channel created by 1-2
Wave 4 is within the channel created by waves 1-2
Wave 5 exceeds trendline created by waves 1 and 3

Input Parameters

Amplitude - The amplitude represents the minimum amount of bars between alternative price points. To find big patterns, increase the amplitude parameter. To find smaller patterns, decrease the amplitude parameter. You can load the indicator many times in the chart to find overlapping patterns of different sizes.
Breakout Period - Optional donchian breakout period for wolfe wave confirmation. Zero means not used.
Max History Bars - Amount of past bars to evaluate when the indicator loads in the chart.
Display Stats - Show or hide the statistics dashboard and performance data.
Display SL/TP Levels - Show or hide suitable SL and TP levels for each signal.
Display Price Labels - Show or hide the pattern price labels.
Drawing Options - Colors and sizes for bullish or bearish lines and labels, as well as font sizes.
Breakouts - Colors and sizes for breakout arrows.
Alerts - Enable or disable alerts at will.

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/ko/market/product/1398", "small_icon": "https://c.mql5.com/31/7/pz-wolfe-waves-mt5-logo-60x60-2758.png", "middle_icon": "https://c.mql5.com/31/447/pz-wolfe-waves-mt5-logo-140x140-6271.png", "icon": "https://c.mql5.com/31/7/pz-wolfe-waves-mt5-logo-200x200-7933.png", "rating": 0, "price": 99, "published": 1377248776, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1467, "title": "Account Info for MT5", "description": "

Overview

\r\n

The script displays information about the trade account and the current financial instrument.

\r\n

Information about the trade account:

\r\n

Account - account number and type (Real, Contest or Demo);
Name - name of the account owner;
Company - name of a company that provide the access to trading;
Server - trade server name;
Connection State - connection state;
Trade Allowed - shows whether trading is allowed on the account at the moment;
Experts Allowed - shows whether it is allowed to trade using Expert Advisors;
Balance - account balance;
Equity - account equity;
Credit - amount of credit;
Profit - profit size;
Free Margin - free margin on the account;
Margin - current margin size;
MarginCall Level - level at which the account falls under Margin Call (a request to replenish the account);
StopOut Level - level at which the account falls under Stop Out (compulsory closing of positions by the broker in case there is not enough free margin on the account;
Leverage - leverage.

\r\n

Information about the current instrument:

\r\n

Symbol - symbols name (symbol description is displayed in brackets);
Digits - number of digits following the decimal point in the instrument price (point size in the quotation currency is specified in brackets);
Bid Price - last bid price;
Ask Price - last ask price;
Spread - spread (information whether the spread is fixed or floating is displayed in brackets);
Stop Level - minimum allowed distance from the current price for placing pending orders;
Freeze Level - range from the current price to the execution price of an order, within which the order cannot be modified or deleted;
Swap Long - swap size for long positions;
Swap Short - swap size for short positions;
Contract Size - contract (lot) size;
Minimum Lot - minimum allowed volume of a deal;
Maximum Lot - maximum allowed volume of a deal;
Lot Step - step of changing of the volume of a deal;
Tick Size - minimum change of the price of the financial instrument;
Tick Value - minimal price change of the instrument in deposit currency (in addition, its size for profitable and losing positions is specified in brackets);
Margin Initial - margin required for opening a position of 1 lot;
Margin Maintenance - size of margin required for maintaining a position of 1 lot;
Margin Long Rate - margin rate for long positions;
Margin Short Rate - margin rate for short positions;
Margin Limit Rate - margin rate for Limit orders;
Margin Stop Rate - margin rate for Stop orders;
Margin StopLimit Rate - margin rate for Stop-Limit orders;
Execution Mode - mode of execution of deals (Request, Instant, Market or Exchange);
Trade Mode - mode of execution of orders (Disable, Buy Only, Sell Only, Close Only or Full).

\r\n

The script doesn't have input parameters and it doesn't trade.

\r\n

Free Version and MetaTrader 4 Version

\r\n

There is a free version of this app. Unlike the full version, it displays the information about the trade account only (no information about the current financial instrument). There is also a free version and a full version of the application for MetaTrader 4 that have the same features.

\r\n

Warning

\r\n

The developer of Account Info for MT5 is not responsible for possible modification or termination of the program's operation due to changes in MQL5 used for developing it made by the trading terminal and language developer - MetaQuotes company. The developer of Account Info for MT5 is not responsible for any loss, damage or missed profits caused by the use of the program, its work or malfunction.

\r\n

Contact Information

\r\n

If you have any questions about the application, comments on its operation or suggestions for future improvements, please send them by email or leave your personal messages via this web site. Let me know what products (Expert Advisors, indicators, scripts) you would like to see.

", "url": "https://www.mql5.com/ko/market/product/1467", "small_icon": "https://c.mql5.com/31/7/account-info-for-mt5-logo-60x60-9268.png", "middle_icon": "https://c.mql5.com/31/439/account-info-for-mt5-logo-140x140-1749.png", "icon": "https://c.mql5.com/31/7/account-info-for-mt5-logo-200x200-8226.png", "rating": 0, "price": 30, "published": 1377077354, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 1549, "title": "CCFpExt", "description": "

CCFpExt is an extended version of the classic cluster indicator - CCFp.

\r\n

Main Features

\r\n

Arbitrary groups of tickers or currencies are supported: can be Forex, CFDs, futures, spot, indices;
Time alignment of bars for different symbols with proper handling of possibly missing bars, including cases when tickers have different trading schedule;
Using up to 30 instruments for market calculation (only first 8 are displayed).

\r\n

Parameters

\r\n

Instruments - comma separated list of instruments with a common currency; for Forex symbols the common currency is either a quote currency or a base currency, which is detected in all given symbols; for any other ticker it's taken from its profit currency property; if the autodetection failed, DefaultBase parameter is used (here, 'base' means a common currency between all tickers, not a base currency of a Forex symbol); the default set of instruments includes all Forex majors EURUSD,GBPUSD,USDCHF,USDJPY,AUDUSD,USDCAD,NZDUSD; please note, that NZDUSD is missing at MetaQuotes-Demo server for some reason, so don't forget to edit as appropriate;
MA_Method - moving average method, the default is linear weighted;
Price - moving average applied price type, the default is typical price;
Fast - fast moving average period, the default is 1;
Slow - slow moving average period, the default is 2;
All_Bars - number of bars to calculate on, the default 0 means all available bars;
BarByBar - false means re-calculating 0-th bar on every tick, true (default) means calculating bar only once (on 1-st tick and when closed);
DefaultBase - default common currency to use; it's used only if the base can not be detected automatically.

\r\n

Description

\r\n

While filling in Instruments, please, make sure you enter existing symbols. If Instruments parameter contains a symbol missing in Market Watch, the indicator tries to add it automatically for you. If the symbol is misspelled or unavailable on your server, an error occurs - you'll see the message \"Errors! Check the log\" on the chart. All details about errors and warning are logged in the Experts log.

\r\n

When number of Instruments is greater than 8, all of them participate in calculations and affect chart lines, but only first 8 are displayed. Though it's feasible to have more than 8 lines, it would produce difficulties with perception. Moreover, each next instrument added to the cluster affects the whole picture less.

\r\n

Please, be patient. The indicator calculates a bunch of moving averages for every symbol, for different time frames. When it's placed on a chart first time, the process may take a while, usually this means some data has being still downloading and calculating. All necessary refreshes take place automatically. You should interfere only if you see the above mentioned error message in the chart.

\r\n

CCFpExt allows you analyzing many interesting clusters, for example, Russian ruble ring (USDRUR, GBPRUR, EURRUR), oil industry (#LKOH, #ROSN, #SGNS, #SIBN), foods (wheat, corn, soy), indices, etc. You may find some examples in screenshots.

", "url": "https://www.mql5.com/ko/market/product/1549", "small_icon": "https://c.mql5.com/31/7/ccfpext-logo-60x60-9787.png", "middle_icon": "https://c.mql5.com/31/441/ccfpext-logo-140x140-7575.png", "icon": "https://c.mql5.com/31/7/ccfpext-logo-200x200-5006.png", "rating": 0, "price": 30, "published": 1377697000, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1593, "title": "Ichimoku Advanced Free", "description": "

Ichimoku Kinko Hyo is a purpose-built trend trading charting system \r\n that has been successfully used in nearly every tradable market. It is \r\n unique in many ways, but its primary strength is its use of multiple \r\n data points to give the trader a deeper, more comprehensive view into \r\n price action. This deeper view, and the fact that Ichimoku is a very \r\n visual system, enables the trader to quickly discern and filter \"at a \r\n glance\" the low-probability trading setups from those of higher \r\n probability.

\r\n

This indicator is based on the standard MT5 Ichimoku Kinko Hyo indicator but I have \r\n designed it to track the other values (RSI, CCI, Momentum, TEMA, ...) instead in a sub window.

\r\n

You can use it as confirmation of other strategies, or if you are a \r\n dedicated Ichimoku user, you can use it as a fantastic adjunct to your Ichimoku \r\n charts.

\r\n

This is free version, you can only use RSI-Ichimoku/Original Ichimoku in sub-window.

\r\n

See Pro and Pro MTF versions.

", "url": "https://www.mql5.com/ko/market/product/1593", "small_icon": "https://c.mql5.com/31/9/ichimoku-advanced-free-logo-60x60-5662.png", "middle_icon": "https://c.mql5.com/31/446/ichimoku-advanced-free-logo-140x140-2292.png", "icon": "https://c.mql5.com/31/9/ichimoku-advanced-free-logo-200x200-6859.png", "rating": 0, "price": 30, "published": 1382967769, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1628, "title": "Bullish Bearish Volume", "description": "

Bullish Bearish Volume is an indicator that divides the volume into the bearish and the bullish part according to VSA:

\r\n

Bullish volume is a volume growing during upward motion and a volume falling during downward motion.

\r\n

Bearish volume is a volume growing during downward motion and a volume falling during upward motion.

\r\n

For a higher obviousness it uses smoothing using MA of a small period.

\r\n

Settings:

\r\n

MaxBars – number of bars calculated on the chart;
Method – smoothing mode (Simple is most preferable);
MA period – period of smoothing;
Applied Volume – volume type.

", "url": "https://www.mql5.com/ko/market/product/1628", "small_icon": "https://c.mql5.com/31/8/bullish-bearish-volume-logo-60x60-2105.png", "middle_icon": "https://c.mql5.com/31/439/bullish-bearish-volume-logo-140x140-7318.png", "icon": "https://c.mql5.com/31/8/bullish-bearish-volume-logo-200x200-4937.png", "rating": 0, "price": 40, "published": 1379064370, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1629, "title": "Trading Sessions Pro", "description": "

Trading Sessions Pro is a trading session indicator with extended settings + the ability to install and display the custom period.

Main Advantages:

The indicator allows you to conveniently manage display of trading sessions on the chart. There is no need to enter the settings each time. Just click the necessary trading session in the lower window and it is highlighted by the rectangle on the chart!
The indicator has two modes of defining the trading terminal's time offset relative to UTC (GMT). You can use offset autodetection by selecting Set Determination Time Offset = Auto From System in the settings, as well as set a manual offset.
When selecting Auto From System, make sure that date/time and time zone are correct on your PC!
If you want to use the indicator for analysis on Saturdays and Sundays, select the manual setting of the terminal time offset relative to UTC Set Determination Time Offset = Manual Setting.
Server Time Offset From UTC (Manual) - offset between the terminal time and UTC and NOT a time zone you are currently located in!
You can enable / disable the display of the desired session

Ability to set trading session open and close time. The time is set according to UTC!

Launch Settings:

Max Day's – number of days on history, for which calculation is performed. It is recommended to set not more than 3 days.
Set Mode – display mode
Set Determination Time Offset – selecting the method of the terminal time offset relative to UTC. Automatic or manual
Server Time Offset From UTC (Manual) – manual terminal time offset.
Collapse Session - collapse of sessions within the region into one.
Alert the Opening Session – trade session opening alert
Show Description – display city names
Font Size – font size for city names
Font Type – font type
Contour Or Rectangle On Chart – selecting the method of highlighting the trade session on the chart (Contour or Filled rectangle)
Width Contour Line On Chart – width of the contour line highlighting a trade session on the chart
Show Grid Line Daily – display the end of a day according to the terminal time by the vertical line
Color Grid Line Daily – vertical line color
Width Grid Line Daily – vertical line width
Style Grid Line Daily – vertical line style
Set Oceania Sessions – settings for Oceania trade session
Set Asia Sessions – settings for Asian trade session
Set Europe Sessions – settings for European trade session
Set America Sessions – settings for American trade session
Set Custom Period – custom period settings

", "url": "https://www.mql5.com/ko/market/product/1629", "small_icon": "https://c.mql5.com/31/14/white-bear-logo-60x60-1578.png", "middle_icon": "https://c.mql5.com/31/446/trading-sessions-pro-logo-140x140-5295.png", "icon": "https://c.mql5.com/31/14/white-bear-logo-200x200-4899.png", "rating": 0, "price": 45, "published": 1391761680, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1652, "title": "VWAP Universal", "description": "

VWAP is Volume Weighted Average Price. It is calculated as addition of products of volume and price divided by the total volume.

\r\n

This version of the indicator is universal as it has three modes of operation:

\r\n

Moving - in this mode the indicator works as a moving average. But unlike ordinary SMA it has smaller lags during big movements! Bands of square deviation can be used in the same way as Bollinger Bands.
Period - in this mode the calculations are performed from the start to the end of period with accumulation (on every bar, the value is calculated for the whole period from the start, thus it considers all the values from the start of the period). The bands of square deviation produce high quality support and resistance levels.
Timer - in this mode the calculations are similar to \"Period\" mode. The difference is the start and the end of the period can be set manually. The maximum period in this mode cannot exceed 24 hours.

\r\n

Settings:

\r\n

Max Bars - number of bars calculated on the chart (0 - all available history).
Use Mode - mode selection. 3 modes are available: Moving, Period, Timer.
Applied Price - price type.
Applied Volume - volume type (tick or real if available).
Set Moving Mode - settings for \"Moving\" mode.
Moving Period - period of calculation for \"Moving\" mode.
Set Period Mode - settings for \"Period\" mode.
Available Period - values of the standard periods: Hour, Day, Week, Asia, Europe, NYSE, CME or Custom.
Custom Period - custom period (in minutes).
Set Timer Mode - settings for \"Timer\" mode.
Start Timer - start of period for timer.
Stop Timer - end of period for timer.
Set Deviation - settings of displaying of deviations.
Show Deviation 1 - display the first square deviation.
Show Deviation 2 - display the second square deviation.
Show Deviation 3 - display the third square deviation.

\r\n

This indicator can work with real volumes only if they are provided by your broker. On default, the tick volume is selected in the settings.

", "url": "https://www.mql5.com/ko/market/product/1652", "small_icon": "https://c.mql5.com/31/8/vwap-universal-logo-60x60-3759.png", "middle_icon": "https://c.mql5.com/31/445/vwap-universal-logo-140x140-4179.png", "icon": "https://c.mql5.com/31/8/vwap-universal-logo-200x200-7576.png", "rating": 0, "price": 57, "published": 1380197955, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1675, "title": "Divergence CCI or any custom", "description": "

Displays divergence for any custom indicator. You just need to specify the name of an indicator name; on default it uses CCI.

\r\n

In addition you can set smoothing for the selected indicator as well as levels. If one of these levels is crossed, you'll receive a notification. The custom indicator must be compiled (a file with extension EX5) and it must be located in MQL5/Indicators directory of the client terminal or in one of its subdirectories. It uses zero bar of the selected indicator with default parameters.

\r\n

Input Parameters

\r\n

Indicator name - name of an indicator, the divergence should be calculated for, CCI on default;
Period CCI - period of averaging of CCI, 7 on default;
Applied price - price used, Close price on default;
Smoothing method - method of smoothing, Simple on default;
Smooth - period of smoothing, 8 on default;
Level1 - level of the indicator, -100 on default;
Level2 - level of the indicator, -100 on default 100;
Calculated bar - number of bars to display divergence, 300 on default;
Filter by volume - volume filter, false on default. If it is enabled, then the divergence signals won't appear in case the volume is less than the average volume for previous 100 bars. Three modes are available: False, True, Auto. In Auto mode, the filter is automatically enabled on timeframes M30 and lower; and it is disabled on timeframes greater than M30;
Display divergence alert - enables notifications about divergence, true on default;
Display cross level alert - enables notifications about crossing the specified levels of the indicator, true on default;
Draw indicator trend lines - enables displaying the trend lines of the indicator during divergence, true on default;
Draw price trend lines - enables displaying the trend lines on the price chart during divergence, true on default;
Line bull divergence color - select a color for the trend line displayed during bullish divergence, Green on default;
Line bear divergence color - select a color for the trend line displayed during bearish divergence, Red on default.

", "url": "https://www.mql5.com/ko/market/product/1675", "small_icon": "https://c.mql5.com/31/8/divergence-cci-or-any-custom-logo-60x60-6808.png", "middle_icon": "https://c.mql5.com/31/438/divergence-cci-or-any-custom-logo-140x140-4840.png", "icon": "https://c.mql5.com/31/8/divergence-cci-or-any-custom-logo-200x200-9266.png", "rating": 0, "price": 30, "published": 1379508564, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1692, "title": "MarginGrid", "description": "

The analyzer allow estimating how the margin level changes when a position price or volume changes.

It also displays price level at which StopOut and MarginCall may occur.

Parameters:

volume position upgrading - the number of lot position changes.
number of levels on the chart - the number of levels plotted on the chart
levels color - color for drawing levels

", "url": "https://www.mql5.com/ko/market/product/1692", "small_icon": "https://c.mql5.com/31/8/margingrid-logo-60x60-6363.png", "middle_icon": "https://c.mql5.com/31/438/margingrid-logo-140x140-4716.png", "icon": "https://c.mql5.com/31/8/margingrid-logo-200x200-1479.png", "rating": 3, "price": 30, "published": 1379426299, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 1708, "title": "Trend check", "description": "

This indicator gives full information about the market state: strength and direction of a trend, volatility and price movement channel. It has two graphical components:

\r\n

Histogram: the size and the color of a bar show the strength and direction of a trend. Positive values show an ascending trend and negative values - a descending trend. Green bar is for up motion, red one - for down motion, and the yellow one means no trend. Signal line is the value of the histogram (you can enable divergence search).
Trend channel: upper border, lower border and the center of the channel (middle line). Color of the middle line shows the slope of the channel, and the channel width shows the volatility.

\r\n

Trading

\r\n

Buy: signal line have crossed the lower border of the channel, the histogram shows the beginning of upward motion. The line is either yellow (channel is horizontal) or green (the channel is directed upwards). It is recommended to move the position to breakeven when reaching the middle of the channel. Close positions when conditions for selling are formed.
Sell: signal line have crossed the upper border of the channel, the histogram shows the beginning of downward motion. The line is either yellow (channel is horizontal) or red (the channel is directed downwards). It is recommended to move the position to breakeven when reaching the middle of the channel. Close positions when conditions for buying are formed.

\r\n

You can also use divergence for entering deals. If a divergence signal is received after the signal line crossed the channel border, you can enter in the direction of the opposite border of the channel without waiting for confirmation from the histogram. It is not recommended to enter a trade at low volatility of the market (when the channel is narrow). It is not recommended to sell when the channel is directed upwards (the middle line is green). It is not recommended to buy when the channel is directed downwards (the middle line is red).

\r\n

The histogram represents a graph of changes of the regression line slope. The channel is the standard deviation from the average slope of the regression line.

\r\n

Input Parameters:

\r\n

Period histogram - period for calculation of the histogram, 24 on default;
Treshold histogram - threshold value for displaying the histogram when there is no trend, 6.0 on default (range: from -6.0 to 6.0);
Period volatility band - period for calculation of the volatility channel, 24 on default;
Treshold volatility band - threshold value for displaying the horizontal orientation of the trend channel, 3.0 on default (range: from -3.0 to 3.0);
Display cross bands volatility alert - notification when the signal line crosses the channel borders, true on default;
Display divergence arrow - displaying divergence graphically (arrows), false on default;
Display divergence alert - notification about divergence, false on default.

\r\n

Currency pair - any. Timeframe - any.

", "url": "https://www.mql5.com/ko/market/product/1708", "small_icon": "https://c.mql5.com/31/8/trend-check-logo-60x60-1344.png", "middle_icon": "https://c.mql5.com/31/445/trend-check-logo-140x140-5361.png", "icon": "https://c.mql5.com/31/8/trend-check-logo-200x200-2840.png", "rating": 0, "price": 30, "published": 1380041280, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1727, "title": "Ultimate Price Action Compine MTF", "description": "

We try to detect long/medium/short-term trends and combine all of them with some price action patterns to find a good entry point.

\r\n

The Indicator benefits are:

\r\n

Can detect long/medium/short-term trends.
Can detect resistances/supports level (like pivot levels).
Shows entry point/time using colored arrows
Multitimeframe mode is available.

", "url": "https://www.mql5.com/ko/market/product/1727", "small_icon": "https://c.mql5.com/31/8/ultimate-price-action-upa-logo-60x60-7649.png", "middle_icon": "https://c.mql5.com/31/445/ultimate-price-action-compine-mtf-logo-140x140-2603.png", "icon": "https://c.mql5.com/31/8/ultimate-price-action-upa-logo-200x200-5668.png", "rating": 0, "price": 49, "published": 1380188784, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1756, "title": "SignalFinder MA", "description": "

SignalFinderMA - is a multicurrency indicator displaying trend direction for several currency pairs and time frames on a single chart. Trend calculation is based on Moving Average.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is defined at the last complete bar.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs.
TimeFrames - time periods (time frames).
MA Period - period of the moving average.
MA Shift - shift of the moving average.
MA Method - method of smoothing of the moving average.
MA Applied Price - price for calculating the moving average.

\r\n

Currency pairs and time frames are separated by comma in the list.

\r\n

If a currency pair or a time frame does not exist or is mistyped, it is marked in crimson in the table.

\r\n

Indicator Signals:

\r\n

Blue arrow up - there is a bullish trend on the last closed candlestick.
Red arrow down - there is a bearish trend on the last closed candlestick.
Gray dot - no trend.
Yellow dot - loading history.

", "url": "https://www.mql5.com/ko/market/product/1756", "small_icon": "https://c.mql5.com/31/8/signalfinder-ma-logo-60x60-8266.png", "middle_icon": "https://c.mql5.com/31/438/signalfinder-ma-logo-140x140-3823.png", "icon": "https://c.mql5.com/31/8/signalfinder-ma-logo-200x200-3639.png", "rating": 0, "price": 30, "published": 1380557969, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1827, "title": "Price Info Panel", "description": "

Introducing a compact and handy panel that shows the main parameter of the current price on a chart.

\r\n

The following information is displayed:

\r\n

The price value itself, a user can choose Bid, Ask or Last;
Instrument name;
Type of the price displayed;
Spread size in pips;
Stops level in pips;
Change of price in pips comparing to the day start;
Current daily range ( High - Low ) in pips;
Average daily range in pips for the last 20 days.

\r\n

External parameters:

\r\n

Instrument Name - name of the instrument to be displayed. If this field is left empty, the chart instrument will be used. The instrument displayed can differ from the one of the current chart. For example, you can view GBPUSD parameters on EURUSD chart.
Instrument Show Name - instrument name that should be displayed on the panel. You can use a custom name for an instrument as its original name can be too long and contain unnecessary information. If this field is left empty, the value from the previous field is used.
Price Type - type of the price displayed. The following type can be set - Show Bid / Show Ask / Show Last.
Show Stop Level - show/hide the stops level. For example, the is no stops level for exchange instruments. Also some modern DCs do not use.
Data Refresh Type - mode of updating the information on the screen. The following modes are available - Tick / Timer / Tick & Timer. In Tick & Timer mode the information is updated at every tick of the instrument and according to a set time interval.
Timer Interval in msec - the time interval for updating the information according to the timer (if selected in the previous parameter);
Chart Corner - chart corner the panel will be located at.
Background Color - background color for the panel.

\r\n

There is a button that minimizes the information displayed. Once it pressed, the panel will display only price and current spread (see an example on the pic. 2).

\r\n

\r\n Advantageous offer for active users and all those who kees reading to this line :)

If you have any interesting ideas for improving this or any other product I offer, then you'll get a big discount for my products if the idea is realized.

Please write all your suggestions on the Comments tab, so we can have a documentary proof of the ideas and see who the first author is.\r\n

", "url": "https://www.mql5.com/ko/market/product/1827", "small_icon": "https://c.mql5.com/31/8/price-info-panel-logo-60x60-2409.png", "middle_icon": "https://c.mql5.com/31/445/price-info-panel-logo-140x140-5974.png", "icon": "https://c.mql5.com/31/8/price-info-panel-logo-200x200-9581.png", "rating": 0, "price": 30, "published": 1381413292, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 1836, "title": "Heiken Ashi Smoothed New", "description": "

This indicator is the same as the popular Heiken Ashi Smoothed.

\r\n

The Heikin Ashi indicator for MetaTrader 5 already exists, but it has two disadvantages:

\r\n

It paints the candles not accurate.
It's not possible to change the candle width. See also Heikin Ashi in MQL5 Code Base.

\r\n

In this version there are no such disadvantages.

", "url": "https://www.mql5.com/ko/market/product/1836", "small_icon": "https://c.mql5.com/31/8/heiken-ashi-smoothed-new-logo-60x60-7005.png", "middle_icon": "https://c.mql5.com/31/445/heiken-ashi-smoothed-new-logo-140x140-9442.png", "icon": "https://c.mql5.com/31/8/heiken-ashi-smoothed-new-logo-200x200-6633.png", "rating": 0, "price": 30, "published": 1381486411, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1842, "title": "Market Watch Panel", "description": "

Introducing a compact and handy panel for watching the market and estimating multicurrency price movements. It shows main parameters for a user defined group of symbols in the form of a table. Its functionality is checked on Forex and FORTS.

The following information is displayed:

Financial instrument name.
Last price value - can be turned off for off-exchange markets.
Ask price value.
Bid price value.
Spread size in pips.
Stop level in pips - can be turned off for off-exchange markets.
Change of price in pips from the day start.
Current daily range (High - Low) in pips.
Average daily range in pips for user defined number of days.
Price change percentage for user defined periods (timeframes).

External parameters:

Market Watch Instruments - the list of work instrument names. The names of the instrument must be separated with a comma. For example, \"EURUSD;GBPUSD\".
Instrument's Show Names - the list of the instrument names that should be displayed in the screen. You can use a custom name for an instrument as its original name can be too long and contain unnecessary information. The names of the instruments must be separated with a comma, and their position must match the position of the corresponding work instruments.
Percent Change Time Frames - the list of periods (timeframes) the price change percentage is displayed for. Must be separated with a semicolon. For example, \"M5;H1;D1;W1\" will display the percentage change for four timeframes (5 minute, hourly, daily and monthly). Price change is calculated as 100 * (Close - Open) / Open.
Show Last Price - show/hide the last deal price. Can be used for exchange markets only.
Show Stop Level - show/hide the stops level. There is no stops level for exchange markets. Also some modern DCs do not use.
Data Refresh Type - mode of updating the information on the screen. The following modes are available - Tick / Timer / Tick & Timer. In Tick & Timer mode the information is updated at every tick of the instrument and according to a set time interval. 5).
Timer Interval in msec - the time interval for updating the information according to the timer (if selected in the previous parameter);
Use EMA for Daily Average - use EMA average when calculating the average daily range. If set to No, the simple averaging will be used.
Days Number for Daily Average - number of days for calculating the average daily range. Usually, it is set 20 days what corresponds to one work month.
Chart Corner - chart corner the panel will be located at (binding to the selected corner).
Show Time Scale - show/hide the time scale on the current chart (fig. 2, 4).
Show Price Scale - show/hide price scale on the current chart (fig. 2, 4).
Background Color - background color for the panel.

There is a button that minimizes the information displayed. Once it pressed, the panel will display only Last/Ask/Bid price and current spread (fig. 3).

Advantageous offer for active users and all those who keeps reading to this line :)

If you have any interesting ideas for improving this or any other product I offer, then you'll get a big discount for my products if the idea is realized.

Please write all your suggestions on the Comments tab, so we can have a documentary proof of the ideas and see who the first author is.

", "url": "https://www.mql5.com/ko/market/product/1842", "small_icon": "https://c.mql5.com/31/8/market-watch-panel-logo-60x60-4063.png", "middle_icon": "https://c.mql5.com/31/447/market-watch-panel-logo-140x140-9869.png", "icon": "https://c.mql5.com/31/8/market-watch-panel-logo-200x200-8362.png", "rating": 5, "price": 39, "published": 1382451057, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 1874, "title": "Multi Currency Index New", "description": "

Any financial instrument that is traded on the market is a position of some active\r\n towards some currency.

\r\n

Forex differs from other markets only in the fact, that\r\n another currency is used as an active.

\r\n

As a result in the Forex market we always\r\n deal with the correlation of two currencies, called currency pairs.
\r\n

\r\n

The project that started more than a year ago, helped to develop a group of indicators\r\n under a joint name cluster indicators.

\r\n

Their task was to divide currency pairs\r\n into separate currencies. Since then indicators were changed several times.

\r\n

Moreover,\r\n the interest of users and active discussions in forums allowed to develop methods\r\n of working with indicators and create trade systems based on them.

\r\n

Custom user's features:

\r\n

The calculation of RSI on the user's buffer
Calculating MACD/ZeroLag MACD
Calculation SMA on the user buffer
Calculating Stochastic close/close without smoothing
Rendering objects (information)
Comment in the lower right corner of the indicator (status indicator)
Initialization of the affected TF currency pairs

", "url": "https://www.mql5.com/ko/market/product/1874", "small_icon": "https://c.mql5.com/31/8/multi-currency-index-logo-60x60-2276.png", "middle_icon": "https://c.mql5.com/31/438/multi-currency-index-new-logo-140x140-8087.png", "icon": "https://c.mql5.com/31/8/multi-currency-index-logo-200x200-6050.png", "rating": 0, "price": 30, "published": 1382533902, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1936, "title": "Gann High Low Activator MTF", "description": "

This indicator is a copy of the Gann Hi-Lo Activator SSL indicator which was rewritten in MQL5. The original indicator was one-colored, that is why for more visual definition of the trend \r\n direction it was necessary to make it colored.

\r\n

This version is Mutitimefame, now you can see multi-trends in a separate window and signals in the main chart.

\r\n

Alert mode and sending of emails has been also added.

", "url": "https://www.mql5.com/ko/market/product/1936", "small_icon": "https://c.mql5.com/31/9/gann-high-low-activator-mtf-logo-60x60-6860.png", "middle_icon": "https://c.mql5.com/31/439/gann-high-low-activator-mtf-logo-140x140-8272.png", "icon": "https://c.mql5.com/31/9/gann-high-low-activator-mtf-logo-200x200-5168.png", "rating": 0, "price": 50, "published": 1382611321, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1940, "title": "Ichimoku MTF", "description": "

MTF Ichimoku is a MetaTrader 5 indicator based on well known Ichimoku.

\r\n

In MetaTrader 5 we have Ichimoku already included as a standard technical \r\nindicator. However it can be used only for the current timeframe. When we \r\nare looking for a trend, it is very desirable to have Ichimokuis showing higher \r\ntimeframes. MTF Ichimoku presented here has additional parameter - \r\nTimeFrame. You can use it to set up higher timeframe from which Ichimokuis will calculate its values.

\r\n

Other basic parameters are not changed.

\r\n

On this version we can also set Maximum Count Bars.

", "url": "https://www.mql5.com/ko/market/product/1940", "small_icon": "https://c.mql5.com/31/9/ichimoku-mtf-logo-60x60-6344.png", "middle_icon": "https://c.mql5.com/31/446/ichimoku-mtf-logo-140x140-7395.png", "icon": "https://c.mql5.com/31/9/ichimoku-mtf-logo-200x200-4003.png", "rating": 0, "price": 30, "published": 1382617558, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1952, "title": "Normalized Volumes Indicator", "description": "

When looking at the volume information that moves the market, a question arises: is it a strong or weak movement? Should it be compared with previous days? These data should be normalized to always have a reference.

\r\n

This indicator reports the market volume normalized between 0-100 values.

\r\n

It has a line that smoothes the main signal (EMA).
The normalization of values occurs within an interval defined by user (21 bars on default).
User can also define any relative maximum, timeframe and number of bars to calculate.

\r\n

Calculation: volNorm = (volReal - absMin) * (relMax - relMin) / (absMax - absMin) + relMin

\r\n

Pay attention to the signal line on the chart (M1, period 55, signal 12): the price increase is preceded by a phase, in which the volumes are below 50 and the price increase is preceded by an increase in volumes in zone 75.

", "url": "https://www.mql5.com/ko/market/product/1952", "small_icon": "https://c.mql5.com/31/9/normalized-volumes-indicator-logo-60x60-5229.png", "middle_icon": "https://c.mql5.com/31/439/normalized-volumes-indicator-logo-140x140-6564.png", "icon": "https://c.mql5.com/31/9/normalized-volumes-indicator-logo-200x200-5958.png", "rating": 0, "price": 30, "published": 1382967332, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1964, "title": "Ichimoku Advanced Pro", "description": "

\r\n

This indicator is based on the standard MT5 Ichimoku Kinko Hyo indicator but I have \r\n designed it to track the other values (RSI, CCI, Momentum, TEMA, ...) instead in a sub window.

\r\n

You can use it as confirmation of other strategies, or if you are a \r\n dedicated Ichimoku user, you can use it as a fantastic adjunct to your Ichimoku \r\n charts.

\r\n

This is a professional version, you can use all Ichimoku types in Properties tab.

\r\n

Buyers who bought this version can request adding new types instead of RSI, CCI.

\r\n

General Parameters

\r\n

Period MA: the number of bars to calculate the moving average.
MA Method: select the type of moving average to show in the current graph.
Applied Price: select price type (close, high, low, etc.).
TimeFrame: provides the vision of MA in different frames to the graph.

\r\n

Advantages

\r\n

Manual trader: it has a \"multipurpose knife\", more versatile than the standard indicators, which facilitates analysis of trends from a single control box and different timeframes of the chart, without having to find at the \"navigator\" each type of indicator.
Automatic trader: Allows you to optimize the type of MA as another parameter of the EA by simply including \"Method MA\" as external parameter. A strategy can not work with EMA but be profitable with VIDYA or AMA, as well tells the author's experience. By giving value to parameter to take into account the following enumeration: {SMA=0, EMA=1, SMMA=2, LWMA=3, DEMA=4, TEMA=5, FRAMA=6, VIDYA=7, AMA=8, LRMA=9, HMA=10, JMA=11, AFIRMA=12};

", "url": "https://www.mql5.com/ko/market/product/1966", "small_icon": "https://c.mql5.com/31/9/all-mas-13-types-multipurpose-tool-logo-60x60-6415.png", "middle_icon": "https://c.mql5.com/31/439/all-mas-13-types-multipurpose-tool-logo-140x140-8641.png", "icon": "https://c.mql5.com/31/9/all-mas-13-types-multipurpose-tool-logo-200x200-1890.png", "rating": 0, "price": 30, "published": 1383124183, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 17482 }

거래 로봇, 지표 및 거래 응용 프로그램의 외환 시장

가격

Informer Volatility

Morning Evening Star

HL D1 Move

Modified Awesome Oscillator

Twiggs Money Flow Index

Spread Report

Depth of Market

Money Flow Index Multiple timeframes

On Click Trade

Expert NEWS

CloseAllPositionTune

DeletePendingOrderTune

CreateGridOrdersTune

ReverseTune

TTMM Time To Make Money

Actual Depth of Market Chart

ACPD Auto Candlestick Patterns Detected

CloseByLossOrProfitTune

CloseByPercentLossOrProfitTune

AABB Active Analyzer Bulls and Bears

Analyzer Signals

Ticks Envelopes

Ticks RSI

Ticks ADX

Ticks MACD

Ticks Stochastic

Ticks CCI

Ticks OsMA

Tick StdDev

Instruments Relativeness

Ticks Momentum

Trade Area

Digitized Candle Length

Ticks Bulls

Ticks Bears

DWMACD

Ticks Heiken Ashi

Ticks Price Channel

Ticks WPR

Ticks ATR

Historical Memory B150

Flet scalper

Good Time

Color Candles Identify the Major Trend

Auto Format

Account Info and Max Lot

SignalFinder

Actual Tick Footprint Volume Chart

UniversalTrader

SignalFinder One Timeframe

Trade Magic

PZ Wolfe Waves MT5

Account Info for MT5

CCFpExt

Ichimoku Advanced Free

Bullish Bearish Volume

Trading Sessions Pro

VWAP Universal

Divergence CCI or any custom

MarginGrid

Trend check

Ultimate Price Action Compine MTF

SignalFinder MA

Price Info Panel

Heiken Ashi Smoothed New

Market Watch Panel

Multi Currency Index New

Gann High Low Activator MTF

Ichimoku MTF

Normalized Volumes Indicator

Ichimoku Advanced Pro

All MAs 13 types MULTIPURPOSE TOOL