{ "from": 25344, "count": 72, "list": [ { "id": 35319, "title": "NewsCatcher Free MT5", "description": "

The advisor NewsCatcher Free opens trades when the price makes a reversal move from support and resistance levels. Market entries should be confirmed by the Relative Strength Index (RSI). The RSI is implemented as a tachometer.

It is recommended to use this advisor in a highly volatile market after a political event or a release of major economic data.

You can use this advisor in the semi-automated mode (the RSI performs an information role) or in the fully automated mode (the RSI decides when to enter the market). The timeframe for the semi-automated mode should not be bigger than 30 minutes, for the fully automated mode - H1 (1 hour).

It turns out that the semi-automated mode, when you locate the major support and resistance levels visually, yields a better result.

You can move the thick line (the level chased by the price). The price must touch the thick line at least once for a trade to be possible. After that, a thin line appears. When the price crosses the thin line a trade is opened. Keep in mind that the advisor opens a buy only in a bullish bar, and a sell in a bearish bar.

You can change the timeframe to see how the current level looks like in other timeframes. The advisor keeps the current level. To drop the current level, switch off the buy or sell button.

There are 2 strategies:

1) The Buy Strategy.

The price moves downside and reaches the oversold zone. As you may know, it is better to buy at the lowest point. But the price may go even lower. How do you know when the price should make a reversal move? This is when the advisor NewsCatcher Free comes in handy. If the price continues to fall, the advisor pushes the thick line (support level) lower. The advisor waits for the price to make a definitive reversal move upside and cross the thin line. Only then it opens a buy.

2) The Sell Strategy.

The price moves upside and reaches the overbought zone. As you may know, it is better to sell at the highest point. As in the buy strategy, the advisor pushes the thick line (resistance level) higher until the price makes a definitive reversal move downside. When the price crosses the thin line, the advisor opens a sell.

The Advisor Properties:

Color preset - you can choose among three available color schemes.

Distance - a distance from the current level for a trade to be opened.

Magic - your magic number.

Volume - use either a fixed value (ex: 0.1) or a percentage of equity (ex: 0.03%).

Stop loss - use points not pips.

Take profit - use points not pips.

Trail - use points not pips.

RSI >> Period of calculation

RSI >> Prices series

RSI >> Bottom level

RSI >> Top level

Comments to the buttons in the chart:

buy - activates the buy strategy. The price should be in the oversold zone, the RSI tachometer in the red zone.

sell - activates the sell strategy. The price should be in the overbought zone, the RSI tachometer in the green zone.

dynamic - activates a search of stop loss and take profit levels by the nearest bar extrema. These levels may not be closer then the values of stoploss and takeprofit currently set.

zero - a stoploss is going to be set at the open price line as soon as the trade gets profitable.

sound - activates sounds of a new thin line (a trade is possible), a new trade, a trail move, and a closed trade.

auto - activates the auto mode. In this mode, the advisor buys when the RSI is in the red zone, and sells in the green zone. The auto mode switches on and off the other buttons as required. If you click the buy or sell button in the auto mode, the auto mode deactivates.

", "url": "https://www.mql5.com/fr/market/product/35319", "small_icon": "https://c.mql5.com/31/302/newscatcher-free-logo-60x60-2565.png", "middle_icon": "https://c.mql5.com/31/445/newscatcher-free-mt5-logo-140x140-3490.png", "icon": "https://c.mql5.com/31/302/newscatcher-free-logo-200x200-1946.png", "rating": 4.5, "price": 0, "published": 1548801070, "popularity": 0.6220419518197562, "category": "Expert", "votes": 2 }, { "id": 35316, "title": "NewsCatcher Visual MT5", "description": "

The advisor NewsCatcher Visual automatically downloads actual data from the mql5.com calendar. The advisor can work in the \"autoclick\" mode, that is it can open trades automatically by comparing actual and forecast values. It also allows to manually open both instant and pending orders with a set volume.

Recommendations

By default the advisor NewsCatcher Visual applies the \"autoclick\" strategy to all events of high volatility. This allows the advisor to work in the fully automatic mode. However, this is not the most profitable approach in trading on economic data. You should take a look at events on a weekly basis and choose the events of high volatility. Such events are: CPI, GDP, Employment Change, Claimant Count, Nonfarm Payrolls and some others. You need to add an event to the autoclick only once, the advisor will remember your choice and work with this event in the future.

The Advisor Properties

Auto Click - switches on the automatic trading mode.

Color preset - you can choose among 3.

Fontsize

Pending orders follow price - click the pending button in the chart 15 minutes before any event for the advisor to open 2 pending stop-orders and relate them to that event. The advisor pushes these pending orders according to the current price. Following the price is stopped 10 seconds before the actual event time.

Step for pending orders - a distance from the current price for pending orders.

Takeprofit

Trail

Stoploss

Volume - a volume as a percentage of the available equity (example: 0.025%) or a fixed volume (example: 0.03).

Testing mode - set it to Demo_Calendar to see a demonstration of the advisor. Test result are of random nature for this mode. To do a test with a real calendar you need to download a week calendar at the end of a week. It is a somewhat long method, but there is nothing else available right now.

Zero auto - a number of minutes after which the advisor tries to set a stoploss at the open price line.

Notes for the buttons in the chart

buy - opens a buy in the current symbol.

sell - opens a sell in the current symbol.

pending - opens 2 pending stop-orders from the current price. Pending orders may follow the price if the property Pending orders follow price is set to true.

dynamic - switches on a dynamic trail.

simple - switches a simple trail.

zero now - sets a stoploss at the open price line as soon as it is possible.

sounds - activates sounds.

lock - locks all actions in the column to the symbol of the current chart.

clear targets - removes all target levels.

rm instant - closes all instant orders.

rm pending - closes all pending orders.

rm profit - closes all profitable trades.

rm loss - closes all losing trades.

remove all - closes all instant and pending orders.

Click a symbol button in the advisor panel to quickly go to its chart.

Click an event name in the advisor panel to open its additional settings: adding to the custom calendar, adding to the autoclick mode, and choosing a symbol.

The dot next to the \"next event\" time blinks when the advisor refreshes data. It refreshes oftener when an event time approaches.

The dot next to an event signal can be active (autoclick is on for this event) or inactive (autoclick is off).

", "url": "https://www.mql5.com/fr/market/product/35316", "small_icon": "https://c.mql5.com/31/302/newscatcher-visual-mt5-logo-60x60-1001.png", "middle_icon": "https://c.mql5.com/31/441/newscatcher-visual-mt5-logo-140x140-4973.png", "icon": "https://c.mql5.com/31/302/newscatcher-visual-mt5-logo-200x200-7802.png", "rating": 0, "price": 45, "published": 1548801026, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35300, "title": "NewsCatcher Pro for MT5", "description": "

NewsCatcher Pro opens both pending and market orders based on data from the mql5.com calendar. In live mode, NewsCatcher Pro automatically downloads the calendar, opens orders, trails and closes orders.

NewsCatcher Pro can trade any event from the calendar with any symbol available in MetaTrader, including Gold, Oil and cross-rates. To change the default symbol, go to the event view you want to change it for.

NewsCatcher Pro uses two strategies:

Strategy 1 (pending orders): the advisor opens two pending orders above and below the current price before data is released. Whichever direction the price moves after economic data is released, one of the pending orders triggers.
Strategy 2 (instant orders): after economic data is released, the advisor evaluates the actual value with the forecast or previous value and, if a difference value is reached, it opens a market order.

The advisor stores strategy settings locally for all data. Economic data is released regularly: Jobless Claims are released every week, while Non Farm Payrolls are released every month. The advisor correctly applies the stored strategy settings to the data. Strategies can be combined. If the advisor opens a market order, a pending order in the same direction is deleted.

By default the advisor NewsCatcher Pro applies the \"autoclick\" strategy to all events of high volatility. This allows the advisor to work in the fully automatic mode. However, this is not the most profitable approach in trading on economic data. You should take a look at events on a weekly basis and choose the events of high volatility. Such events are: CPI, GDP, Employment Change, Claimant Count, Nonfarm Payrolls and some others. You need to set up an event only once, the advisor will remember your choice and work with this event in the future.

Properties of the Advisor

Color preset

Fontsize

Pending orders follow price - following the price is stopped 10 seconds before the actual event time.

Global step for pending orders - overwrites the value marked with \"g\" in the event panel.

Global takeprofit – overwrites the value marked with \"g\" in the event panel.

Global trail – overwrites the value marked with \"g\" in the event panel.

Global stoploss – overwrites the value marked with \"g\" in the event panel.

Global volume – either a fixed value (ex: 0.02) or a percentage from available equity (ex: 0.1%). It may overwrite the value marked with \"g\".

Slip - if this value is exceeded, any market order is declined.

Testing mode - use \"Demo_Calendar\" for testing purposes if you do not have real calendar files. Results in this case should be discarded because the advisor issues order commands randomly.

Zero auto (mins) - number of minutes after opening a trade. When this time runs out, the advisor attempts to set the stop loss at the open price line. Set to 0 to disable it.

Notes for buttons in the chart

buy - opens a buy in the current symbol.

sell - opens a sell in the current symbol.

pending - opens 2 pending stop-orders from the current price. Pending orders may follow the price if the property Pending orders follow price is set to true.

rev. on slip - reverses a trade if the value of Slip is exceeded.

dynamic - switches on a dynamic trail.

zero now - sets a stoploss at the open price line as soon as it is possible.

sounds - activates sounds.

lock - locks all actions in the column to the symbol of the current chart.

clear targets - removes all target levels.

rm instant - closes all instant orders.

rm pending - closes all pending orders.

rm profit - closes all profitable trades.

rm loss - closes all losing trades.

remove all - closes all instant and pending orders.

Click a symbol button in the advisor panel to quickly go to its chart.

Click an event name in the advisor panel to open its additional settings.

The dot next to the \"next event\" time blinks when the advisor refreshes data. It refreshes oftener when an event time approaches.

", "url": "https://www.mql5.com/fr/market/product/35300", "small_icon": "https://c.mql5.com/31/302/newscatcher-pro-for-mt5-logo-60x60-3524.png", "middle_icon": "https://c.mql5.com/31/441/newscatcher-pro-for-mt5-logo-140x140-3585.png", "icon": "https://c.mql5.com/31/302/newscatcher-pro-for-mt5-logo-200x200-3167.png", "rating": 0, "price": 125, "published": 1548800963, "popularity": 0.6248205594650705, "category": "Expert", "votes": 0 }, { "id": 35287, "title": "Swiss HolyGrail", "description": "

Swiss Holy Grail Indicator

Motivation and functioning

The HolyGrail indicator serves to optimize an entry.

At that very moment I caught myself, that I went short in an uptrend, so I got into a trade in an anti-cyclical way. Or I have entered into a much too mature trend. This indicator should prevent such errors: One should always be aware of whether it is pro- or anticyclic entry, and one must always know about the maturity of the trend. Don't enter an old trend. Linda Raschke advises to buy the first pullback on the EMA20 (the ADX should be> 30).

The indicator fills the gap between EMA20 and 20. If a green snake shows up, the first pullback into the queue should be used as an entry point. EMA20 is the bottom line of the snake. In the short case exactly the opposite. There, the first rebound is traded on the red snake.

Entrances in combination with the Stochastic Indicator are the best way to succeed (Fig. 1).

The indicator starts at midnight, only the current day is displayed. When the market is closed useBarsSinceMidnigt must be set to false.

Time Units

The indicator works at all timeframes. If it is used for the purpose of entry optimization then use rather short time units (M1 - M5)

Inputs

fast ema period => fast period (10)

slow ema period => slow Period (20)

useBarsSinceMidnight => Start at midnight

inpBarsBack => If use BarsSinceMidnight is false, specify desired columns to include into the calculation and display

", "url": "https://www.mql5.com/fr/market/product/35287", "small_icon": "https://c.mql5.com/31/302/swiss-holygrail-logo-60x60-6994.png", "middle_icon": "https://c.mql5.com/31/439/swiss-holygrail-logo-140x140-5228.png", "icon": "https://c.mql5.com/31/302/swiss-holygrail-logo-200x200-3588.png", "rating": 3, "price": 0, "published": 1548766414, "popularity": 0.07499942721641277, "category": "Indicator", "votes": 1 }, { "id": 35091, "title": "MACrossOver Master", "description": "

MA Crossover Master

The strategy is based on price crossover with Moving Average indicator, confirmed by Fractal Adaptive Moving average and RSI indicator.

\r\n

The default settings are just place holders and not necessarily the best. Use the settings that best suites you or your strategy.

\r\n

OpenBUY - Set to true to allow buy trades. This setting is true by default.
OpenSELL - Set to true to allow sell trades. This setting is true by default.
StartTakeProfit - take profit value for open orders (default value 5 pips(50 point))
RSIperiod - These are settings for the RSI to be used. Default settings are as the default MetaTrader 4 RSI settings (period 14).
iFrAMAperiod -Period value of the iFrAMA indicaor.
MAPeriodTrend- Moving Average Trend Period
MAMethodTrend -Mode Of the Moving Average(MODE_SMA,MODE_EMA,....)
BuyLevel - RSI level of which if crossed upwards.
SellLevel - RSI level of which if crossed downwards.
MAPeriodShort - Fast Moving Average value
MAPeriodLong - Slow Moving Average value
ManualLots - This is the lot size of the EAs trades. 0.01 is the default setting.
LotStep - Lot Step Value of The EA (This is use for calculate next lot size of the martingale function).
MagicNumber - This is the unique identifier for the EAs trades. This number must be different for each chart you've attached the EA only if the chart currency pairs are the same.
Komment- comments of the order.
Step1_3,Step4_6,Step7_8,Step9_12,Step13 - this values use to manage martingale functions (default settings recommended)
Trendfilter - Trend Filter Value (in point) for Fractal Adaptive Moveing Average indicator

\r\n

Recommendation

More trading opportunities for lower time frame.
minimum 3000$ for One Currency Pair
use 0.01 Lot Size
use low spread currency fair (High Spread Filter Included.)
Use 3 and 5 digit brokers
Test in Strategy tester by changing Manual Lot And Lot Step parameter before Real Trading.

", "url": "https://www.mql5.com/fr/market/product/35091", "small_icon": "https://c.mql5.com/31/302/macrossover-master-logo-60x60-2906.png", "middle_icon": "https://c.mql5.com/31/441/macrossover-master-logo-140x140-7995.png", "icon": "https://c.mql5.com/31/302/macrossover-master-logo-200x200-3576.png", "rating": 0, "price": 30, "published": 1548758720, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35049, "title": "TradePanel MT5", "description": "

Trade Panel est un assistant commercial multifonction. L'application contient plus de 50 fonctions de trading pour le trading manuel et permet d'automatiser la plupart des tâches commerciales.

Attention ! Les réductions sont limitées dans le temps, chaque mardi le prix augmentera de 5$ (jusqu'à 100$).

Avant l'achat, vous pouvez tester la version de démonstration sur un compte de démonstration. Télécharger la version d'essai de l'application pour un compte de démonstration : https://www.mql5.com/fr/blogs/post/762644.

Instructions complètes ici.

Commerce.

Permet d'effectuer des opérations commerciales en un clic :

Ouvrir des ordres en attente et des positions avec un calcul automatique du risque.
Ouvrir plusieurs ordres et positions en un seul clic.
Ouvrir une grille d'ordres.
Fermer des ordres en attente et des positions par groupes.
Inverser la direction d'une position (fermer Buy > ouvrir Sell et fermer Sell > ouvrir Buy).
Bloquer des positions (rendre les volumes des positions Buy et Sell égaux en ouvrant une position avec le volume manquant).
Fermeture partielle de toutes les positions en un seul clic.
Définir le take-profit et le stop-loss de toutes les positions sur un même niveau de prix.
Définir le stop-loss de toutes les positions au niveau du point mort.

Lors de l'ouverture des ordres et des positions, les fonctions suivantes peuvent être appliquées :

Répartition du volume calculé entre plusieurs ordres ou positions (lors de l'ouverture de plusieurs ordres et positions en un seul clic).
Visualisation des niveaux de trading sur le graphique avant l'ouverture d'un ordre.
Ouvrir une position uniquement si le spread actuel ne dépasse pas le seuil défini.
Ratio automatique entre take-profit et stop-loss.
Stop-loss et take-profit virtuels (invisibles pour le courtier).
Augmentation automatique de la taille du stop-loss et du take-profit en fonction du spread actuel.
Calcul du take-profit et du stop-loss basé sur l'indicateur ATR.
Définition de la date d'expiration d'un ordre en attente.
Mise en place d'un trailing pour un ordre en attente (l'ordre en attente se déplace automatiquement suivant le prix actuel avec une distance prédéfinie).
L'application peut gérer les ordres et les positions ouverts depuis le terminal mobile (téléphone).

Gestionnaire de risque et rapport de trading.

Permet d'analyser l'historique des transactions :

Affiche l'historique des transactions sur le graphique. Permet de choisir d'afficher sur le graphique uniquement les positions Achat, Vente, Rentables et Non rentables.
Crée un rapport de trading pour le symbole actuel ou pour l'ensemble du compte.

L'application permet de contrôler le risque sur votre compte de trading :

Montre le profit pour la journée, la semaine et le mois.
Limite la perte quotidienne, hebdomadaire et mensuelle.
Limite le profit quotidien, hebdomadaire et mensuel.
Limite le nombre de transactions par jour.

Lorsqu'une limite est atteinte, l'application peut :

Afficher des messages sur le graphique, envoyer des notifications sur le téléphone ou envoyer un courriel.
Fermer toutes les positions et ordres en attente.
Bloquer les positions (égaliser les volumes des positions Buy et Sell en ouvrant une position du volume manquant).
Fermer le terminal jusqu'au lendemain.

Ordres OCO.

Permet de créer des ordres OCO.

Les ordres OCO sont deux ordres en attente liés par une fonction d'annulation mutuelle : lorsque l'un des ordres est exécuté, l'autre ordre est supprimé.

Fermeture des ordres et des positions.

Permet de fermer tous les ordres en attente et les positions si le profit ou la perte total des positions atteint la valeur spécifiée :

Peut fermer les ordres et les positions sur le symbole actuel ou sur l'ensemble du compte.
Peut prendre en compte le profit des positions Buy+Sell ou uniquement Buy, ou uniquement Sell.
Peut fermer toutes les positions et tous les ordres ou uniquement certains types sélectionnés.

Tâches.

Permet de programmer des tâches différées pour l'ouverture et la fermeture des ordres et des positions :

La tâche s'active lorsqu'elle atteint l'heure spécifiée, lorsque le prix touche la ligne de la tâche ou lorsqu'une autre tâche est activée.

La tâche peut ouvrir ou fermer tout type d'ordres et de positions.

Fonction de stop suiveur.

Permet de définir pour une position la fonction de stop suiveur (déplacement du stop-loss en direction du profit selon un certain algorithme).

7 types de stop suiveur.
Dispose de la fonction \"Démarrer\".
Il est possible d'utiliser un stop-loss virtuel.

Fonction de seuil de rentabilité.

Permet de définir pour une position une fonction de seuil de rentabilité (déplacer le stop-loss au prix d’ouverture de la position ou à un autre prix lorsque le profit prédéfini est atteint) :

Le nombre de niveaux de seuil de rentabilité par position n’est pas limité.
Il est possible d’utiliser un stop-loss virtuel.
Permet de définir la distance selon l’une des quatre mesures : en points, en pourcentage du stop-loss, en pourcentage du take-profit, en prix.

Fonction de fermeture partielle de position.

Permet de définir la fonction de fermeture partielle d'une position (fermeture d'une partie de la position lors de l'atteinte d'un profit ou d'une perte prédéfinie) :

Le nombre de niveaux de fermeture partielle par position n'est pas limité.
Permet de définir le volume de fermeture selon l'une des trois mesures : taille de lot fixe, % de la taille actuelle du lot, % de la taille initiale du lot.
Permet de définir la distance selon l'une des quatre mesures : en points, en pourcentage du stop-loss, en pourcentage du take-profit, au prix.

Alerte.

Permet de configurer des alertes lorsque le prix atteint une ligne spécifiée ou un moment déterminé.

Les alertes peuvent apparaître sur le graphique et dans les messages envoyés par courriel ou sur le téléphone mobile.

Gestion des graphiques.

Permet de changer de symbole sur les graphiques du terminal et d'analyser les données par symbole :

Il est possible de créer jusqu'à 4 listes de symboles. La liste des symboles et son nom sont définis par l'utilisateur.
Il est possible de marquer un symbole comme Favori.
Une liste séparée de symboles ayant des ordres et positions ouverts.
Les boutons avec symbole peuvent être surlignés de n'importe quelle couleur.

Panneau d'information.

Affiche les informations actuelles sur le symbole :

Spread.
Temps restant avant la clôture de la barre.
Profit sur le symbole actuel.
Nombre de positions et leur volume de trading.
Lecture de l'indicateur ATR.
Amplitude de l'indicateur ATR.
Prix de break-even pour les positions sur le symbole actuel.

Gestion des ordres et des positions.

Permet de gérer les paramètres des ordres et des positions :

Modifier le stop-loss et le take-profit.
Modifier le stop-loss et le take-profit virtuels.
Modifier la fonction de trailing stop.
Modifier la fonction de break-even.
Modifier la fonction de fermeture partielle de la position.
Fermeture complète ou partielle de la position.
Suppression automatique d’un ordre en attente à l’heure ou au prix spécifié.

Gestion de la grille d'ordres.

Permet de gérer les paramètres de la grille d'ordres :

Modifier le stop-loss et le take-profit de tous les ordres de la grille.
Modifier le stop-loss virtuel et le take-profit virtuel de tous les ordres de la grille.
Définir la fonction de trailing stop pour la grille d'ordres.
Définir la fonction de protection contre les pertes pour la grille d'ordres.
Fermeture totale ou partielle de la grille d'ordres.
Ferme automatiquement les ordres en attente dans la grille lorsque toutes les positions de la grille sont fermées.
Peut automatiquement fermer une paire de positions (une position perdante et une position gagnante) si leur profit cumulé atteint la valeur définie.

#Étiquettes: Trading Panel, Trading Manager, Trade Manager, Order Management, Trailing Stop, Break Even, Partial Close, Manual Trading, Trading Assistant, Trade Assistant, Risk Management, Overtrading, Position Management, Max Loss, History Stat, virtual tp, virtual sl, Hidden Stop Loss, Hidden Take Profit, bulk sl, bulk tp, Mobile Trades, Order grid, Panneau de trading, Gestionnaire de trading, Gestion des ordres, Stop suiveur, Seuil de rentabilité, Clôture partielle, Trading manuel, Assistant de trading, Gestion des risques, Surtrading, Gestion des positions, Perte maximale, Statistiques historiques, TP virtuel, SL virtuel, Stop Loss caché, Take Profit caché, SL en masse, TP en masse, Trading mobile, Grille d'ordres.

", "url": "https://www.mql5.com/fr/market/product/35049", "small_icon": "https://c.mql5.com/31/1901/tradepanel-mt5-logo-60x60-5671.png", "middle_icon": "https://c.mql5.com/31/1901/tradepanel-mt5-logo-140x140-5146.png", "icon": "https://c.mql5.com/31/1901/tradepanel-mt5-logo-200x200-4430.png", "rating": 4.866666793823242, "price": 75, "published": 1548754649, "popularity": 1211.7688810465502, "category": "Utility", "votes": 150 }, { "id": 35278, "title": "Swiss VWAPsimple", "description": "

Swiss VWAPsimple

\r\n

Motivation

\r\n

Did not find free VWAP that works, the one that I found craseh. So I created a VWAP which calculates values only for the actual day. So computer resouces are not over stressed.

\r\n

What is VWAP, how is it used?

\r\n

VWAP stands for Volume Weighed Average Price, it calculates the running sum of tick volume and the runnung sum of price times tickvolume. The division of these sums result in a weighed price (Sum P*V/Sum V). The calculation starts normally at midnight. The values are strongly dependent from the starting time. Be careful if you have assets not starting at midnight. Also the calculation gets more and more unprecise during the day because the sums get bigger and bigger during the day and errors add.

\r\n

VWAP is a sort of equilibrium price. It might divide the day in a long and short bias zone. I recommend to use Pivot Points, SMA200 and EMA1000 in addition to establish a daily bias dividing line. So if you have your long and short zone only trade long in the long zone and vice versa. You might go short in a long zone but the price must have a reasonable distance from the daily bias border line or the VWAP.

\r\n

VWAP shows you, too, if you are in a sideways phase if price is near VWAP (and SMA200, SMA1000, Pivot Point).

\r\n

Principle:

\r\n

Extended long zone, beware of bull traps

\r\n

................................................

\r\n

Long zone, no shorts

\r\n

----------------------------------------------- VVAP

\r\n

Short zone, no longs

\r\n

................................................

\r\n

Extended short zone, beware of bear traps

\r\n

Inputs

\r\n

useBarsSinceMidnight => Normal use set it to true, with closed markets you have to set it > Start point of VWAP (number of bars back) if useBarsSinceMidnight ist false

\r\n

Show comment => show comment which shows distance to vwap

Comment says that you might go short in a long area => Comment tells you that you might go short in a long situation

Comment says that youmigt go long in a short area => Comment tells you that you might go short in a short situation

let the Indicator talk, vwap cross => When price crosses vwap it says \"vwap cross\"

Defines warning range, too much warnings make it smaller => Tuning of the warning, set it smaller for currencies, when Vwap-Distance to price is zero, the warning comes

\r\n

inpArrowCode => Wingdings font code of Mt5, cross is code 251

\r\n

inpShowDistanceLabel => Show distance Ask-VWAP by label

XDISTANCE => Dstance for label X-direction

YDISTANCE => Distance for label Y-direction

inpFontSize => Fontsize for label

inpVwapText1 bis 4 => Texts for label

\r\n

Timeframe

\r\n

Use M1 to H1. VWAP should be invariant to timeframes. But because of rounding errors it is never exact the same in various timeframes.

\r\n

", "url": "https://www.mql5.com/fr/market/product/35278", "small_icon": "https://c.mql5.com/31/302/swiss-vwapsimple-logo-60x60-8573.png", "middle_icon": "https://c.mql5.com/31/439/swiss-vwapsimple-logo-140x140-4477.png", "icon": "https://c.mql5.com/31/302/swiss-vwapsimple-logo-200x200-8337.png", "rating": 4.800000190734863, "price": 0, "published": 1548752994, "popularity": 1.3111032467221106, "category": "Indicator", "votes": 5 }, { "id": 35066, "title": "ReverseTrend", "description": "

ReverseTrend MT5

Introducing ReverseTrend - your fully automatic trading advisor designed for night scalping, utilizing the Bollinger Bands indicator for entry signals, focusing exclusively on BUY positions. This EA does not employ the risky martingale strategy, ensuring a safer trading approach.

Key Features:

Proven Long-Term Performance: ReverseTrend MT5 has shown remarkable results over a 5-year testing period from 2017 to 2024, with significant gains like +94.6% on EURAUD, +468% on EURCAD, and +335% on EURUSD, proving its effectiveness and reliability over time.
High Profitability Across Multiple Pairs: Optimized for six currency pairs (EURAUD, EURCAD, EURCHF, EURGBP, EURUSD, XAUUSD), this EA has maintained impressive performance, especially on EURAUD, EURCAD, and EURUSD, showcasing its versatility and potential for profit across different markets.
Risk Management: With drawdowns kept at reasonable levels (8% for EURAUD, 18% for both EURCAD and EURUSD), ReverseTrend MT5 incorporates risk management to safeguard your investment, balancing high returns with controlled risk.
No Martingale Strategy: By avoiding the martingale method, ReverseTrend ensures that your trading is not subject to the exponential risks associated with increasing trade sizes, focusing instead on a stable, indicator-based strategy.

Account Requirements:

Hedging Account Type: A hedging account is necessary for optimal performance.
Optimized Settings: It's crucial to use the optimized setting files tailored for each specific currency pair to achieve the best results. These settings can be found in the comments section of the product.

2025 Update!!!

Recent tests using the same optimized settings have continued to yield astonishing results, confirming the EA's effectiveness over time.

Other products

Input parameters

Risk	Risk as a percentage of the deposit (divided by the number of trades)
StopLoss	StopLoss in pips
TakeProfit	TakeProfit in pips

bb_timeframe	Bollinger: time frame for Bollinger
bb_period	Bollinger: MA period
bb_shift	Bollinger: MA Shift
bb_deviation	Bollinger: MA deviation
bb_price	Bollinger: applied price

DayCandle	Filter by the size of the daily candle in points, the condition DayCandle > Open - Close must be met for position open, if 0 - the filter is disabled
GapFilter	Filter by gap size in points, if the gap is greater than this value the deal will not open, if 0 - the filter is disabled

MaxTrades	Maximum number of orders in a series
Step	Step between orders
MaxSpread	Max spread filter

StartHour1	Time filter: the trading hour at the end of the day, if 24 - transactions open only at the beginning of the day
StartHour2	Time filter: the trading hour at the beginning of the day
StopHour2	Time filter: an hour before which (not included) transactions will be opened
CloseHour	Time filter: hour of forced closure of a series of orders, if = 5 - orders are closed only by TP or SL
Slip	Slippage
Magic	EA magic number
Com	Comment
ColorDrawWarn	The color of the text labels on the chart
isWarnDrawn	Draw warning labels on a chart?

", "url": "https://www.mql5.com/fr/market/product/35066", "small_icon": "https://c.mql5.com/31/1589/reversetrend-logo-60x60-9417.png", "middle_icon": "https://c.mql5.com/31/1589/reversetrend-logo-140x140-4620.png", "icon": "https://c.mql5.com/31/1589/reversetrend-logo-200x200-3509.png", "rating": 0, "price": 49, "published": 1548697079, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 32661, "title": "Trading King Extended MT5", "description": "

Extended version of Trading King MT5 advisor. Indicators used: ATR, RSI, Stochastic, CCI, WPR, DeMarker, RVI. Each indicator can be used optionally on / off.

MT4 version of advisor Trading King Extended

The set file and optimization results will be posted in the discussion of the advisor.

The strategy of the adviser is based on an assessment of the strength of the trend and the finding of correction / reversal points; it compares the absolute values of the rise and fall of the market over a certain time period. Filters are used for news, delay, spread expansion, increased volatility, slippage and day of the week. The strategy uses short-term trading - night scalping, not using martingale

Suitable for all brokers, including American brokers with FIFO. All orders are accompanied by virtual stop-loss and take-profit in pips. The graph displays various information and indicators indicators. The recommended minimum deposit is $ 200 for 0.01 lot. A trading lot is calculated using the formula: Balance / FROM_BALANCE * FIX_START_LOT. Take Profit set 50-100 pips with a spread of 20 pips. The timeframe is set in the parameters of the adviser, the default settings are optimized for EURUSD

If STOPLOSS_IN_PIPS = TRUE, then STOPLOSS is set in pips, otherwise in% of balance. STOP_TRADING = TRUE, the EA stops trading when a loss is received and sends a notification to MetaQuotes ID and E-Mail. If, at the time of the loss, orders are opened in the opposite direction, the adviser will switch to the closing mode for all orders at the breakeven level.

Take profit is initially set from the opening price of the first order. If N is the number of open orders specified in the START_ZEROLEVEL parameter, take profit will be set from the breakeven level. If the number of orders has reached the specified value in START_BREAKEVEN - then the adviser will close all orders in breakeven

If the day of the week is set as FALSE, and there are open positions in the market, the adviser will go into the mode of closing orders on a breakeven basis, a new cycle of orders will not be opened

To use the news filter, you need: In the trading terminal, in the menu, open \"Tools\" ---> \"Settings\" ---> \"Advisors\" ---> add the address \"http://calendar.fxstreet.com\" in the \"Allow WebRequest for the following URLs \".

The time of the expert is set by your broker's server time in the \"Market Watch\".

For the first acquaintance with the advisor, I recommend enabling the visual mode in the strategy tester.

Main settings:

START_HOUR , START_MINUTE - hour and minute to start trading;
STOP_HOUR , STOP_MINUTE - hour and minutes for the end of trading;
NEWS_FILTER - enable news filter;
NEWS_IMPOTANCE - the importance of news;
STOP_BEFORE_NEWS , START_AFTER_NEWS - stop, before and after the news. set in minutes;
MAX_ORDERS - the maximum number of orders in one direction;
IGNORE_SIGNAL - if = TRUE, and there are already open positions, the signal to open the opposite order will be ignored until the number of orders becomes 0 or MAX_ORDERS;
MAX_SLIPPAGE - maximum slippage;
MAX_SPREAD - maximum spread;
USE_BALANCE_PCT -% of funds from the balance used by the advisor for work, is set for each character separately;
FIX_START_LOT - fixed starting lot for each N amount from the balance (FROM_BALANCE);
FROM_BALANCE - N balance amount for the calculation of the starting lot (FIX_START_LOT);
STOPLOSS_IN_PIPS - if TRUE, then STOPLOSS is set in pips, otherwise in% of balance;
STOPLOSS - stop loss
STOP_TRADING - stop trading when a loss is received
TAKEPROFIT - take profit in pips
START_ZEROLEVEL - if N is the number of orders, take profit will be set from the breakeven level
START_BREAKEVEN - close all orders in breakeven if the number of orders has reached the specified value
TIMEFRAME_BAR - timeframe for defining a new bar
MAGIC_NUMBER - magic number
SHOW_INFORMATION - display information on the chart

", "url": "https://www.mql5.com/fr/market/product/32661", "small_icon": "https://c.mql5.com/31/721/trading-king-extended-mt5-logo-60x60-7579.png", "middle_icon": "https://c.mql5.com/31/721/trading-king-extended-mt5-logo-140x140-1138.png", "icon": "https://c.mql5.com/31/721/trading-king-extended-mt5-logo-200x200-5255.png", "rating": 5, "price": 360, "published": 1548695874, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 35225, "title": "Swiss InsideOutsideBar", "description": "

Swiss InsideOutsideBar

\r\n

Imortance of Inside- and Outside Bars

\r\n

Inside bars are completely engulfed by its previous bar. The pattern is also known as \"harami\" (pregnant). Outsidebars engulf the previous bar.

\r\n

Inside bars might mark situations before an outbreak. They are a condensed form of a symmetrical triangle. Symmetrical triangles represent a battle between bulls and bears. There can be an outbreak to either side, mostly the outbreak is in direction of the main trend.

\r\n

The combination of inside bar followed by an outside bar build the so called \"popgun\" pattern. Popgun Patterns are mostly followed by an outbreak on either side of the outside bar (see image 4). In many cases the outside bar might preceded by an incomplete inside bar, which is not marked. Therefore outside bars alone might also be an indicator of a sudden outbreak.

\r\n

Motivation

\r\n

I use this indicator in D1 to have an idea of a possible outbreak in conjunction of my \"Swiss OpeningRangeIndicator\".

\r\n

Timeframes

\r\n

The indicator works an any timeframe. In small time frames the patterns might not be significant. I suggest M3 to D1. In M1 the indicator shows sluggish behaviour of the price.

\r\n

Inputs

\r\n

inpArrowCode => Code for Up-Arrow (see mql5.com)

\r\n

inpArrowCode1 => Code for Down-Arrow (see mql5.com)

\r\n

inpArrowDistance1 => Distance in pixels for up arrow labels

\r\n

inpArrowDistance2 => Distance in pixels for down arrow labels

\r\n

let indicator talk => warns you by sounds \"inside bar\" and \"outside bar\" as soon the complete bar is closed.

\r\n

show inside bars => show inside bar

\r\n

show outside bars => show outside bar

\r\n

", "url": "https://www.mql5.com/fr/market/product/35225", "small_icon": "https://c.mql5.com/31/301/swiss-insideoutsidebar-logo-60x60-9880.png", "middle_icon": "https://c.mql5.com/31/446/swiss-insideoutsidebar-logo-140x140-9231.png", "icon": "https://c.mql5.com/31/301/swiss-insideoutsidebar-logo-200x200-4506.png", "rating": 0, "price": 0, "published": 1548596109, "popularity": 0.30277407149383706, "category": "Indicator", "votes": 0 }, { "id": 35155, "title": "Intersection EA", "description": "

Intersection EA is a fully automated software (trading robot), executing trading orders on the currency market in accordance with the algorithm and unique trading settings for each currency pair.

Intersection EA is perfectly suitable for beginner traders as well as for professionals who got solid experience in trading on financial markets.

Traders and programmers of Kalinka Capital OU company, worked hard developing the Intersection EA forex robot, starting from the year 2011. Initially, this strategy was used by our traders as semi-automated signal system in trading with Kalinka Capital OU accounts. With the years, it became less and lesser dependant on trader's control. In 2016, we've fully automated this system and made it available in our shop. Then it was named as Intersection EA, and it is now available for everyone! As for professional traders and investors, and beginners, as a fully automated trading system. You need only to choose the trading settings that suite your needs and install the Intersection EA in your trading terminal MetaTrader 4.

We consider Intersection EA trading system to be a top of the line and a safe to use forex robot. Using the Intersection EA in your trading, you don't need to get any \"trend\" or \"reverse\" based forex robots. 21(!) options of market analysis are implemented in this advisor. We've used maximal and sane combinations of trend indicators and oscillators in all 30 of market analysis options. So, there are basically 21(!) forex robots trading by the market «divergence» and «convergence» search strategies.

Trader can chose from 21(!) strategies/classes for divergence and convergence search with different timeframes, from technical to fundamental analysis, allowing to enter the market and fix profits inside the trading day, or hold the trades on fundamental basics from few days to few weeks, moving along the trend collecting all long term activity the market can offer.

We've created few strategies and a range of the trading settings, specially for the PAMM managers and personal account managers, managing their own personal capital.

STRATEGY

Market entry - search for formed divergence or convergence on specified instrument and time frame. Algorithm of the advisor allows to chose one of 21(!) strategies and classes of market analysis.

Trading options - scalping, intraday trading, long term trading - fundamental movements with older timeframes analysis.

INDICATORS - Accelerator, Accumulation/Distribution, Average Directional, Movement Index, Average True Range, Awesome oscillator, Bears Power, Bulls Power, Commodity Channel Index, DeMarker, Force Index, Momentum, Money Flow Index, Moving Averages Convergence/Divergence, Moving Average of Oscillator, On Balance Volume, Relative Vigor Index, Standard Deviation, Stochastic Oscillator, Relative Strength Index, Larry Williams' Percent Range

TimeFrames

М5, М15 - scalping, technical analysis.
Н1 - intraday trading, technical analysis.
Н4, H8 - long term trading, fundamental analysis.

Profit support - profit is supported by trail by the ParabolicSAR indicator or by the time of position's life span.

Profit fixing - by the physical takeprofit, set by specified minimum, if there are no clear projections on volatility statistics for the last 50-120 completed candles. Also, in most cases physical takeprofit will be set in accordance with maximum or minimum of ended instrument movement wave for the last 50-120 candles.

(!) When the trail is activated, physical takeprofit will be deleted and the position will be support by trail.

Currency pair - AUDUSD, AUDCHF, AUDJPY, AUDCAD, CADJPY, EURCAD, EURJPY, EURUSD, GBPCAD, GBPUSD, USDCAD, USDCHF, USDJPY.

", "url": "https://www.mql5.com/fr/market/product/35155", "small_icon": "https://c.mql5.com/31/300/intersection-ea-logo-60x60-9593.png", "middle_icon": "https://c.mql5.com/31/441/intersection-ea-logo-140x140-4683.png", "icon": "https://c.mql5.com/31/300/intersection-ea-logo-200x200-2206.png", "rating": 0, "price": 550, "published": 1548500439, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35202, "title": "Take Your Profit", "description": "

Take Your Profit X3 MT5

Take your Profit is a fully automatic multi-currency expert Advisor that trades on the Forex market using a trend strategy based on a breakout or rebound from moving Average or Double Exponential Moving Average with the possibility of placing up to three take profits in one trade. The EA can be run on any instruments with any TF, but the best results are obtained on TF: M30, H1, H4.

The deal is opened by fully fixing the price above or below the moving average. Entry into the long is carried out by low, and in the short by high fast MA, after each transaction there is a reversal of the parameters, which avoids false signals. In case of a\" false breakout \"of the moving average, the robot will open another series of trades in the direction of the main trade when the\" refilling \" is enabled.

The advantages of the robot

* No need to disconnect during news

* Always set SL, TP and 2 scenarios to transfer trades to breakeven.

* The results of the tester converge with the results on a real account

* Flip quick MA Haya to low after the signal for a more accurate trade entry at the breakout or the bounce from slow MA/DEMA

* Slow moving MA/DEM selection

\r\n

Characteristic

* Prevent duplication-false / true – prevent duplication. False-duplication enabled, True-disabled

* Number of duplication-2 - the number of deals with refilling on the false breakout of the moving

* Close entry-false / true-close trades on the opposite signal, if False – trades will be hedged, if True-close trades on the reverse signal

* TimeFrame-1H-select timeframe

* Time work on / off-false / true-time limit

* Time start-9
* Time finish-9

* Auto Lot-false / true – auto lot, if True, the % of risk per trade will be calculated taking into account the stop loss value from equity. (Deposit $ 1000, autolot 2%, stop loss 100P. 2%=$20

To calculate the lot per trade with a risk of 2% of 1000$ we 20$ / 100P = 0.02 l

* Lots for main orders

* Lot #1-2-trading volume for the first target

* Lot #2-2-trading volume for the second target

* Lot #3 – 1 – trading volume for the third goal

* %X-1.3-martingale (multiplies the first target in case of closing with a loss, 1-disabled)

* Lots of orders for refill orders to be filled is displayed when Auto Price - true if it is about the breakdown of the slow moving MA or DEMA

* Lot #1 double-2-trading volume for the first purpose of refilling

* Lot #2 double-1-trading volume for the second purpose of refilling

* Lot #3 double-1-trading volume for the third topping purpose

* Takes orders for the main

* Take Profit #1 - 750

* Take Profit #2 - 1800

* Take Profit #3 – 3500

* Takes for orders to be filled

* Take Profit #1 double-600

* Take Profit #2 double-1500

* Take Profit #3 double-3000

\tOther parameters

* Stop loss-300-Orders will be automatically opened with this stop loss value.

* BreakEven after first Take-300 – after reaching the first target, the remaining trades will be transferred to the specified \"breakeven after the first take»

* BreakEven – 200 – is triggered by the achievement of the price of \"pips\" (the value before the first goal) and activates the \"Closing the breakeven to take»

* BreakEven price plus points-10-All 3 trades are moved to breakeven after reaching the price of 200 p. as mentioned above, if the first target is not reached, the trade will be closed at breakeven.

You can set a negative value, for example -100 (minus one hundred)

* Trailing-850-distance from which the trawl will be started

All values are specified in pips, to disable any of the parameters you need to select the value – 0 (zero)

* Maximum Allowed Slippage-0-limit entry to a slippage trade

* Maximum Allowed Spread-0-limit entry to a spread trade

* Magic – 100500 – a magic number for identifying the EA's orders.

MA Settings-quick MA settings

* MA period-1

* MA Shift-0

* MA Method

* MA Price – Low

* Auto Price-false / true – automatically rebuild MA from Hai to low.

The entrance is long on law, short on Huy.

MA / DEMA Settings - settings and selection of slow moving

* Type MA / DEMA-MA / DEMA - select slow moving between MA or DEMA

* Period-90

* Shift-0

* Price-Median price

* Method (MA only) - Exponential-MA only

", "url": "https://www.mql5.com/fr/market/product/35202", "small_icon": "https://c.mql5.com/31/301/take-your-profit-logo-60x60-4660.png", "middle_icon": "https://c.mql5.com/31/446/take-your-profit-logo-140x140-1455.png", "icon": "https://c.mql5.com/31/301/take-your-profit-logo-200x200-4486.png", "rating": 0, "price": 35, "published": 1548468131, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35163, "title": "ZhiBiA", "description": "

This indicator is suitable for any variety on MT5 and any cycle, but the most suitable cycle is 30 minutes and 4 hours. It is simple to use, the arrows will never change, no drift, no backfire.

The principle of this index is based on ATR and custom MA, combined with mixed computing, developed, high accuracy.

Buy: Look at the green up arrow;

Sell: Look at the red down arrow.

The arrow appears and orders immediately!

It is suggested that the two cycles should be looked at together, which is to refer to the trend of the big cycle (after the big arrows in the big cycle have passed), and then look at the arrows in the small cycle! _______

", "url": "https://www.mql5.com/fr/market/product/35163", "small_icon": "https://c.mql5.com/31/301/zhibia-logo-60x60-7111.png", "middle_icon": "https://c.mql5.com/31/440/zhibia-logo-140x140-8312.png", "icon": "https://c.mql5.com/31/301/zhibia-logo-200x200-8151.png", "rating": 0, "price": 58, "published": 1548379704, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 35094, "title": "VWAP Simple", "description": "

The Volume Weighted Average Price is similar to a moving average, except volume is included to weight the average price over a period.

Volume-Weighted Average Price [VWAP] is a dynamic, weighted average designed to more accurately reflect a security’s true average price over a given period. Mathematically, VWAP is the summation of money (i.e., Volume x Price) transacted divided by the total volume over any time horizon, typically from market open to market close.

VWAP reflects the capitalist democracy of the market — where it’s one vote per share, not one vote per trader — more honestly describing the concept all traders implicitly accept: that the market is driven by large participants.

Institutions use it to objectively evaluate the execution quality of large trades, whereas independent traders experience this as dynamic, otherwise hidden support and resistance occurring at the VWAP. Institutional buyers and algorithms will often use VWAP to plan entries and initiate larger positions without disturbing the stock price.

The VWAP can be used similar to moving averages, where prices above the VWAP reflect a bullish sentiment and prices below the VWAP reflect a bearish sentiment. Traders may initiate short positions as a stock price moves below VWAP for a given time period or initiate long position as the price moves above VWAP.

Parameters:

Applied Price: PRICE_CLOSE = Closing Price

PRICE_OPEN = Opening Price

PRICE_HIGH = The maximum price for the period

PRICE_LOW = The minimum price for the period

PRICE_MEDIAN = The median price, (maximum + minimum) / 2

PRICE_TYPICAL = Typical price, (maximum + minimum + closing) / 3

PRICE_WEIGHTED = Average price, (maximum + minimum + closing + closing) / 4

Accumulation Period: DAILY

WEEKLY

MONTHY

NONE

INTRADAY * New Feature in 2.25v

Applied Volume: VOLUME_TICK

VOLUME_REAL

Period Accumulation Intraday: Int value to required period in candles for accumulation. ( This only work with Accumulation period INTRADAY.)

For example, to VWAP for 60 minutes, use Trimeframe 1 minute and set 60 period.

Buffers:

This indicator has 2 buffers.

1) The first, VWAP value,

2) Second is Stag (Candle current. 0 is first candle)

", "url": "https://www.mql5.com/fr/market/product/35094", "small_icon": "https://c.mql5.com/31/300/vwap-simple-logo-60x60-2866.png", "middle_icon": "https://c.mql5.com/31/447/vwap-simple-logo-140x140-3658.png", "icon": "https://c.mql5.com/31/300/vwap-simple-logo-200x200-3074.png", "rating": 4.241379261016846, "price": 0, "published": 1548331820, "popularity": 5.210038206980635, "category": "Indicator", "votes": 29 }, { "id": 35128, "title": "Time Scale for MT5", "description": "

The indicator draws the time scale on the chart. You can specify the time offset, adjust the size and font to display on the chart (it is displaying your local time on your chart instead of MT time). You can also select the desired format for displaying the date and time.

You may be interested in my other product, which contains a more advanced version of the Time Scale.
You can also find my other products here.

Parameters

Hours (time shift) — time shift (hours);
Minutes (time shift) — time shift (minutes);
Show time on mouse — show time under the pointer;
Precise time scale — calculate the time between bars;
Hide MT's time scale — hide the standard scale;
Scale date format — format for the date on the scale;
Scale time format — format for time on the scale;
Mouse date format — format for the date under the mouse pointer;
Mouse time format — format for the time under the mouse pointer;
Font name — choose a font;
Font size — font size;
Ink color — color of the ink of scale;
BG color — color of the background of scale;
Ink Select — font color for the selected date;
BG Select — background color for the selected date;
Transparency (0-255) — transparency of the background of the scale;
Position on chart — position on the chart;
Y offset (pix) — scale shift on the chart vertically.

", "url": "https://www.mql5.com/fr/market/product/35128", "small_icon": "https://c.mql5.com/31/300/time-scale-for-mt5-logo-60x60-4791.png", "middle_icon": "https://c.mql5.com/31/446/time-scale-for-mt5-logo-140x140-2390.png", "icon": "https://c.mql5.com/31/300/time-scale-for-mt5-logo-200x200-9424.png", "rating": 4.766666889190674, "price": 0, "published": 1548258012, "popularity": 27.341292821330484, "category": "Indicator", "votes": 30 }, { "id": 34397, "title": "WindExpansion MT5", "description": "WindExpansion is a fully automated\r\n solution to get a smart edge type from the market: it will enter when \r\nthe “smart money” is starting to heavy push the market (after \r\naccumulation/distribution phases that form tiny ranges) and volume is \r\nexpanding due big interest to sustain the price caused by psychological \r\nbuying/selling pressure; when this situation happens many traders will \r\ntry to fade the move but “big dogs” will be stronger and collect profits\r\n by the crowd; when the opposite situation happens it will implement some great trade management \r\ntechniques that allow locking-in profit as soon as possible.\r\n\r\n

Technical details

\r\n

WindExpansion open two trade at once, the first with fixed \r\ntarget profit and the second is simply trailed all along the moves; it \r\nalways uses tiny stop loss and try to ride big moves while it lock-in \r\nyour profits (as soon as possible) until target is reached; it\r\nuse \r\nonly genuine trade/money management concepts.

\r\n

This EA will open trades at the open of new candle and it takes \r\nadvantage from two expansion levels that happen on two different time \r\nframe (M30 and H1) with 4 different set files for each time frame; each \r\nset file will work to take a portion of the move (as you probably know \r\nthe market has many dimensions) from smallest to the largest move to \r\nimprove its edge over different move types in fact it implement 4 different \r\nrisk:reward figure in its set files (1:0.5, 1:1, 1:2, 1:3). You can \r\nnotice that while the first set file work much like a scalper, the other three set files will work \r\nlike a big “pips-catcher”. The algo is fully optimized (walk forward optimization type with \r\nprogressive out-of-the sample periods to avoid curve fitting risk) to \r\nwork with the most liquid and followed pair: EurUsd.

\r\n

WindExpansion is ultimately a good solution if you want to get\r\n your reliable edge in a relaxed environment; it isn't a “get quick rich\r\n scheme” any serious trader aims to have stability over the years and at\r\n same time a good night's sleep because you are sure to trade with \r\nsomething that you know deeply.

Main features

\r\n

NO martingale, NO grid or any dangerous method! There are no ways to cheat the market! IT IS PROVEN!
It isn't “broker-dependent” but a good broker choice (low \r\nspread, good speed execution, etc..) will allow you to have improved \r\nresults
It open a basket of trades between 2 and 16 at once based on expansion strength
It runs on 2 different time frame (M30 and H1) with 4 different \r\nset files for each TF to catch expansion in multi-dimensional and \r\nmulti-amplitude fashion
Professional trade management that lock-in and protect your pips as a stalker!
Optimizable for other pairs (remember: EurUsd is the TOP traded forex pair)
Automatically adjusting for 4-5 digits

\r\n

Main parameters

\r\n

Show_infoPanel - enable/disable the info dashboard
expansion_lvl - minimum (in pips) expansion of the candle
expansionLvl_limit - maximum (in pips) expansion of the candle
expansion_Period - period of (price based) dynamic indicator
expansion_strength - a factor to measure the specific breakout's power
Trigger_hunting - enable/disable the pending orders mode
th_fix - number of pips beyond/behind the expansion candle to set the pending orders
th_dynamic - a percentage factor (calculated on the expansion candle) to set the pending orders
pending_expiry - number of bars after which the existing pending orders will be deleted
use_XYStop - enable/disable a time stop for the trades and select an advanced mode for the time stop based
XY_Timefactor - the number of bars after which trades will be closed based on the \"use_XYStop\" selected mode
dynamic_SL/dynamic_TP - dynamic factor to set stop loss/take profit (for TP it work only if TP_lvl=O)
TP_lvl/Trailing_lvl - take profit and trailing stop (in pips)
minSL_lvl/maxSL_lvl - minimum and maximum (absolute) stop loss (in pips)
riskoffset - level (in pips) at which EA will trail the stop loss to \"lock_pips\" level
lock_pips - level (in pips) of profit locked-in
AggressiveMM - it will enable/disable and select a mode to have an Aggressive money management type (soft/hard)
hard_factor - a multiplier factor to increase the lotsize when \"hard\" mode is selected (martingale MM)
Trading_only_News - it will enable/disable the opportunity to trade the strategy only in the news events periods

", "url": "https://www.mql5.com/fr/market/product/34397", "small_icon": "https://c.mql5.com/31/676/windexpansion-mt5-logo-60x60-2627.png", "middle_icon": "https://c.mql5.com/31/676/windexpansion-mt5-logo-140x140-4109.png", "icon": "https://c.mql5.com/31/676/windexpansion-mt5-logo-200x200-2138.png", "rating": 0, "price": 679, "published": 1548172106, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34394, "title": "WindFlow HTF MT5", "description": "

WindFlow HTF is a useful tool suited to use in conjunction \r\ntogether with my WindFlow indicator. This indicator will give you a \r\nbackground vision about the price action trend on a higher timeframe, so\r\n when it runs with the WindFlow indicator you have an almost complete \r\ntrading solution. At this point, you only need some support/resistance \r\nanalysis and a bit of focus to become a consistent trader.

\r\n

The metaphorical \"wind's ballet\"

\r\n

Professional traders know that every timeframe is governed by its own\r\n “above meaningful timeframe” but at the same time this higher timeframe\r\n is driven by its own lower timeframe in an inner fashion; this means \r\nthat the higher timeframe will be late on the momentum moves than its \r\nlower timeframe but at the same time when the move occurs on the higher \r\ntimeframe it is a meaningful move. This is a bit like the “wind's\r\n ballet” where different directional flows are mixed to form turbulence \r\nor quiet moments but when the quiet is too long and strange, sooner or \r\nlater there will be a huge storm! I studied these concepts for years and\r\n they never cease to fascinate me: market's operators are behaving like \r\nthe nature's forces, this is an awesome concept! Also, if you know \r\nFibonacci (alias Leonardo Pisano, an Italian mathematician genius) he \r\ndiscovered a sequence which very often occurs in nature just like in the\r\n financial markets.

\r\n

Now, one question arises: why traders (especially newbies) often have\r\n hard time to be consistently profitable? Well, many times (almost \r\nalways), this happens because they are not aware of the market type; is \r\nit ranging or trending? Is it quiet or volatile? Capability to spot the \r\ncorrect market type is vital for your work as a trader just like the \r\nground's conditions are vital for race cars success! \"Expecting the same system to work in all market types is the definition of insanity\" this is the sentence by a great market's psychologist Van Tharp in \"Market Wizards\" financial book.

\r\n

Main Features

\r\n

Based on WindFlow trend's dynamics (without momentum/volatility calculation but only meaningful trend direction)
Very useful for technical analysis
Works on every symbol and timeframe
Optional use of “above meaningful timeframe” auto-detection or manual timeframe choice

\r\n

Inputs

\r\n

period: indicator's period
strength: indicator's strength
WindFlowHTFTimeFrame: allow selection of your desired TF to show trend dynamics (if WindFlowHTFautoTF is false)
WindFlowHTFautoTF (true/false): enble or disable the auto-detection of the \"above meaningful timeframe\"
LoockBackBars: how many bars it look back for calculations (100 by default is enough to have correct calculations)

\r\n

", "url": "https://www.mql5.com/fr/market/product/34394", "small_icon": "https://c.mql5.com/31/297/windflow-htf-mt5-logo-60x60-8673.png", "middle_icon": "https://c.mql5.com/31/439/windflow-htf-mt5-logo-140x140-7995.png", "icon": "https://c.mql5.com/31/297/windflow-htf-mt5-logo-200x200-9493.png", "rating": 0, "price": 0, "published": 1548171177, "popularity": 0.35534882518167077, "category": "Indicator", "votes": 0 }, { "id": 34418, "title": "WindFlow MT5", "description": "

WindFlow is a powerful solution for manual traders that will drive your trading decisions in no time. I designed this indicator taking into account three main concepts: momentum, break of recent trend and volatility. Just like the wind's flow any trend can have small correction or major change in its direction based on the main trend's strength, so at glance you can have a very good idea on the next \"wind's direction\" when you look at your charts.

How to properly use WindFlow?

WindFlow is the perfect tool to have a very clear picture about the recent market dynamics, this because it is based on dynamic's concepts itself just like the wind is dynamic. When you see a new signal it is the time to take some action; if you are an experienced trader you can confirm this signal with your own analysis; if you are a newbie in the trading world you have found a great friend in this tool, i suggest to confirm the signals just looking at the higher time frame's waves formation (higher high-lower high for uptrend for example) and doing a simple support and resistance analysis. Often you will find that market is ranging on higher TF (you will spot this by sup/res analysis), in this case you can easily switch to lower timeframe as M5 or M15 and start to trade near the support and resistance only (that you have spot on higher TF) thanks to WindFlow's indications, in this way you will have great winratio% and your drawdown will be very low. So make sure to spot the correct market type if it is trending or ranging just like the professional traders are doing! As you can see I'm sharing a great and useful tool here that help me every day in my trading activity, you can do also very well in trading but it is all up to you; so if trading is you real passion i give you the sureness that you can succeed as a trader.

I also designed a simple tool that you can download for free, it will give you an idea on trend's background (it will show the trend on the above meaningful timeframe, as you probably know each TF is governed by its above TF) you will be amazed by this stressfree trading way, in fact you have also the possibility to do correct trade management thanks to the indicator's line that are very good places where trail your stop loss and protect your profit in a progressive manner without any doubts where to exit, in fact exits are much more important than entries to have a strong EDGE over the time (you will get a stop profit by contrary volatility or you can exit on opposite signals), i designed these tools to simplify my trading activity in these two main difficult tasks (especially from a psychological point of view): entry decisions and trade management.

Main Features:

Never repaints
Based on price action and volatility dynamics
Extremely useful for technical analysis, entry signal and trade management task
Works on every symbol and time frame
Alert options like E-Mail and Notification Service for mobile devices

Inputs:

period - indicator's period
strength - indicator's strength signal
notification - enable/disable notifications
alertMessage - indicator's signals popup notify
alertEmail - indicator's signals e-mail alerts

", "url": "https://www.mql5.com/fr/market/product/34418", "small_icon": "https://c.mql5.com/31/676/windflow-mt5-logo-60x60-2749.png", "middle_icon": "https://c.mql5.com/31/676/windflow-mt5-logo-140x140-8232.png", "icon": "https://c.mql5.com/31/676/windflow-mt5-logo-200x200-8195.png", "rating": 0, "price": 179, "published": 1548170453, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 35043, "title": "KT Ichimoku Trader MT5", "description": "

KT Ichimoku Trader is a fully automated expert advisor that offers five popular trading strategies based on the Ichimoku indicator. Each strategy has it's own entry and exit method without any interference to other strategies. The Ichimoku system can be applied to all major currency pairs and metals. However, we found that it performs reasonably well mainly on two pairs.

MT4 Version is available here https://www.mql5.com/en/market/product/35041

Features

Trade up to 5 famous trading strategies based on the Ichimoku.
Comes with 4 advance trading filters that can be fully customized.
Inbuilt algorithm to fire trades only in the direction of trend.
Possible to place the SL, TP and Trailing either in pips or the volatility coefficient.
Comes with proper money management and loss avoidance module.

Trading Strategies

Five popular trading strategies based on the various Ichimoku elements. Each of the strategies has it unique entry and exit point without any interference to other strategies.

Strategy 1: Tenkan-Kijun Cross

Normal Mode:

Buy Trade: When Tenkan-sen cross above the Kijun-sen.
Sell Trade: When Tenkan-sen cross below the Kijun-sen
Buy Exit: When Tenkan-sen cross below the Kijun-sen.
Sell Exit: When Tenkan-sen cross above the Kijun-sen.

Advanced Mode:

Buy Trade: When Tenkan-sen cross above the Kijun-sen + Tenkan-sen is above the Kumo Cloud + Kumo Cloud is bullish.
Sell Trade: When Tenkan-sen cross below the Kijun-sen + Tenkan-sen is below the Kumo Cloud + Kumo Cloud is bearish.
Buy Exit: When Tenkan-sen cross below the Kijun-sen.
Sell Exit: When Tenkan-sen cross above the Kijun-sen.

Strategy 2: Kumo Cloud Breakout

Normal:

Buy Trade: When price close above the Kumo cloud.
Sell Trade: When price close below the Kumo cloud.
Buy Exit: When price close below the Kumo cloud.
Sell Exit: When price close above the Kumo cloud.

Advanced:

Buy Trade: When price close above the Kumo cloud + Tenkan-sen is above Kijun-sen + Future Kumo is bullish.
Sell Trade: When price close below the Kumo cloud + Tenlan-sen is below Kijun-sen + Future Kumo is bearish.
Buy Exit: When price close below the Kumo cloud.
Sell Exit: When price close above the Kumo cloud.

Strategy 3: Kijun-Price Cross

Buy Trade: When price close above the Kijun-sen and Kijun-sen is above the Kumo.
Sell Trade: When price close below the Kijun-sen and Kijun-sen is below the Kumo.
Buy Exit: When price close below the Kijun-sen.
Sell Exit: When price close above the Kijun-sen.

Strategy 4: Chikou Breakout

Buy Trade: When Chikou breakout above the range of last 26 period price.
Sell Trade: When Chikou breakout below the range of last 26 period price.
Buy Exit: When price close below the Kijun-sen.
Sell Exit: When price close above the Kijun-sen.

Strategy 5: Kumo Future Twist

Normal:

Buy Trade: When future Kumo turns bullish i.e. SpanA cross above the SpanB in future.
Sell Trade: When future Kumo turns bearish i.e. SpanA cross below the SPanB in future.
Buy Exit: When future Kumo change the direction or Price close below the Kijun-sen.
Sell Exit: When future Kumo change the direction or Price close above the Kijun-sen.

Advanced:

Future Kumo turn bullish/bearish + price is above/below the current cloud.

Input Parameters

----- Trading Filters -----
Trading Session: Choose the appropriate trading session from the list.
Trend Filter: If true, the EA avoids new positions that may be against the market trend.
Volatility Filter: If true, the EA avoids new positions during the period of high or low volatility (depends on the chosen volatility coefficient).
Vortex Filter: This filter distinguishes the price movement into two positive and negative oscillating lines. A long position is preferable when the positive line is above the negative line and vice versa.
MMI Filter: Market Meanness Index
----- Miscellaneous settings -----
Max. Loss Protection: If true, the EA will stop trading when the total loss becomes more than the maximum Loss Limit set by the user.
Max. Loss Limit in Percentage: Insert the loss limit in percentage.
EA Capital: Insert the capital amount dedicated to the EA.
Logging: EA logs it's operation details in the journal tab.

", "url": "https://www.mql5.com/fr/market/product/35043", "small_icon": "https://c.mql5.com/31/305/kt-ichimoku-trader-mt5-logo-60x60-4342.png", "middle_icon": "https://c.mql5.com/31/446/kt-ichimoku-trader-mt5-logo-140x140-4786.png", "icon": "https://c.mql5.com/31/305/kt-ichimoku-trader-mt5-logo-200x200-4064.png", "rating": 1, "price": 90, "published": 1548038117, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 35017, "title": "SBA scalping v75", "description": "

ini adalah indikator khusus digunakan untuk trading di binary.com dengan pair volatility 75. indikator ini sangat simpel dan mudah digunakan baik untuk yang sudah profesional atau pun yang baru dalam dunia trading terutama yang baru di market volatility 75.indikator ini lebih bertujuan untuk scalping trader dan menggunakan timeframe M1 sebagai acuan untuk entry.

this is a special indicator used to trade at binary.com with a volatility pair of 75. this indicator is very simple and easy to use both for professionals or new ones in the world of trading especially those new to market volatility 75. This indicator is more aimed at scalping traders and use the M1 timeframe as a reference for entry.

", "url": "https://www.mql5.com/fr/market/product/35017", "small_icon": "https://c.mql5.com/31/299/sba-scalping-v75-logo-60x60-8319.png", "middle_icon": "https://c.mql5.com/31/438/sba-scalping-v75-logo-140x140-1756.png", "icon": "https://c.mql5.com/31/299/sba-scalping-v75-logo-200x200-8494.png", "rating": 0, "price": 50, "published": 1547965173, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34962, "title": "Ind5 InfoPad Information Panel", "description": "

INFOPad est un panneau d'information qui crée des informations sur la paire de devises sélectionnée dans le terminal MetaTrader 5.

Il y a 5 fonctions de cet indicateur :

Affiche les informations principales et principales sur le symbole sélectionné : Ask BID, Spread, Stop Level, Swap, Tick value, Commissions ;
Affiche les objectifs futurs de la cible SL et de la cible TP (le nombre de points du stop loss et du take profit établis, le montant en dollars);
Il montre le bénéfice reçu pour les périodes : Aujourd'hui, Semaine, Mois, Année, Bénéfice total pour la devise sélectionnée ;
Il montre la position ouverte actuelle, son lot (volume), le nombre de positions, le profit des positions en points, dollars, pourcentage;
Affiche des informations supplémentaires sur le graphique pour les transactions ouvertes. Il montre les niveaux de stop loss et take profit et les objectifs de ces niveaux de stop ;
Écrit des informations dans les fichiers journaux lorsqu'une transaction est ouverte sur un symbole, une transaction est fermée, une transaction est modifiée ;
Joue un fichier son lors de l'ouverture d'une affaire, de la fermeture d'une affaire, de la modification d'une affaire ;
Envoie un message d'information au téléphone (PUSH Notification) lors de l'ouverture d'une transaction, de la clôture d'une transaction, de la modification d'une transaction.

INFOPAD pour Metatrader 4
Panneau de trading en un clic : VirtualTradePad
Chers amis et utilisateurs de nos conseillers, ajoutez vos notes dans la section Avis .
Toutes les mises à jour de notre logiciel forex sont gratuites !

Caractéristiques principales

Le nom de la paire de devises, La présence d'une position ouverte sur le symbole, son type et la taille du lot.
Demander et offrir des prix dans un format lisible ;
Rentabilité d'une position actuelle en dollars, points et pourcentage du dépôt actuel ;
Spread actuel (si le spread flottant dans le nom est (F));
Le retrait minimum actuel pour les ordres stop et les ordres en attente ;
Échangez des positions courtes et échangez des positions longues ;
Le coût de 1 point de mouvement de prix dans la devise de dépôt du lot actuellement installé dans le terminal pour ce poste ;
Distance au stop loss en points et en dollars ;
Distance pour prendre des bénéfices en points et en dollars ;
Bénéfice ou perte quotidien en dollars pour cette paire de devises aujourd'hui dans la devise du dépôt ainsi qu'un pourcentage du solde actuel ;
Bénéfice ou perte hebdomadaire en dollars pour une paire de devises donnée pour la semaine en cours ;
Bénéfice ou perte mensuel en dollars pour une paire de devises donnée pour le mois en cours ;
Bénéfice ou perte annuel en dollars pour une paire de devises donnée pour l'année en cours ;
Tout disponible par l'histoire;

Autres caractéristiques:

Dans l'option Paramètres de saisie : Afficher \\ Masquer les invites, lorsque vous survolez les boutons,
ainsi que la langue des invites English / Русский / 中国 / Português / Español / Deutsch /日本語;
Cet indicateur peut être utilisé dans le mode multi-caractères de 1 graphique ;
Le paramètre du type de chaîne du nom de la paire de devises : SymbolToShowCustom - par défaut, il accepte la devise du graphique ;
Cet indicateur peut être utilisé avec d'autres panels et experts de notre collection ;

Autres caractéristiques:

Langue = 0 ; -> Conseils (info-bulles) et langue du texte ;
AstuceAfficher = vrai; -> Info-bulles lors du survol des boutons ;
AfficherInfoPosition = vrai; -> Afficher les informations sur pos et SL / TP sur la carte ;
SymbolToShowCustom = \"\"; -> Symbole de nom personnalisé à échanger avec PAD ;
MagicNumber = \"777\" ; -> Nombre magique de positions et d'ordres ouverts ;
UseAllMagicFromAllAccount = true; -> Travailler avec toutes les magies sur le symbole ;

Expforex,Vladon,Indicator,Utility

", "url": "https://www.mql5.com/fr/market/product/34962", "small_icon": "https://c.mql5.com/31/1730/ind5-infopad-information-panel-logo-60x60-6112.png", "middle_icon": "https://c.mql5.com/31/1730/ind5-infopad-information-panel-logo-140x140-7526.png", "icon": "https://c.mql5.com/31/1730/ind5-infopad-information-panel-logo-200x200-8361.png", "rating": 4.888888835906982, "price": 0, "published": 1547824007, "popularity": 1.7885430977995447, "category": "Indicator", "votes": 9 }, { "id": 34924, "title": "GS grid5", "description": "

Fully automated Expert Advisor using the advanced grid algorithm and constrained Martingale (MT4 version: GS grid ).

Set up to work on EURUSD timeframe M15. Test 2021 shows a high percentage of winning orders: more than 98%.

Works on HEDGING accounts with a leverage of 1:500 and a Deposit from 1000USD.

Can use the news feed from Forex Factory to prevent trading during news release (Filter News Forex Factory=true;). To access the options terminal menu on the Expert Advisors tab, you must enable WebRequest: http://nfs.faireconomy.media/ff_calendar_thisweek.xml

It allows you to protect the EA from opening orders in an unstable market (it is not tested in the strategy tester).

Principle of operation

It uses the Heiken ASHI indicator built into the EA to open orders using an advanced grid algorithm.

Built-in News filter: Advisor does not open new deals on the days of publication of decisions on rates of the Fed and the ECB.

You can enable limited martingale or use a permanent lot.

The deal starts with the first open order and ends when the total profit of the orders (separately Sell, separately Buy) exceeds the value of the Target profit parameter and, depending on the value of the Set take Maximum profit parameter:

NO_use - orders are closed immediately;
use_Signal - closed when a reversal signal is received;
use_Trailing - Stop Loss groups of orders are set and Trailing mode is enabled.

Parameter The Setting Set contains a list of various auto-tuning parameters for the advisor. Including \" Nightly\" - night scalping mode.

Settings are sorted by increasing risk and profitability. You can consider them as examples for mastering the management of the advisor.

There are filters that allow you to configure the expert Advisor for the best trading conditions.

By default, Final day = Friday, the adviser on Friday does not open new deals, but only completes the open on Thursday.

There is a manual trading mode called Choosing Trade Options = Manual.

Orders are opened by clicking the SELL and BUY buttons and will be accompanied by expert Advisor in the common group of orders.

The Auto/Manual switch button is displayed on the graph in the list of parameters.

Additional information in my blog: https://www.mql5.com/en/blogs/post/724376

Parameters

Display info = true - display the table of used parameters
Choosing Trade Options = Auto - mode {Manual, Auto}
Setting Set = No - options for the adviser's auto-tuning parameters (No, Safety, Nightly, Work1, Work2, Work3, Risky)
Magic number = 23577700 - must be unique for each chart
Start Lots = 0.01 - the initial volume of the lot
Lot Increment Factor = 1.5 - lot size lot = lot * MathPow (Lot Increment Factor, num), where num is the order number in the SELL or BUY group
Number of steps to increase the lot = 7 - limits the lot increase to the specified number of steps
Maximum orders = 13 - the maximum number of open orders
Min distance between orders Ashi (cents) = 45 - the interval between orders of the group for the signal Ashi
Min distance between orders grid (cents) = 120 - the interval between orders of the group for the grid
Order Stop Loss = 0 - Stop Loss orders
Order Take Profit = 200 - Take Profit orders
Target profit (cents) = 90 - target profit
Set Take Maximum profit = use_Signal - mode of closing the deal at the highest possible profit {NO_use, use_Signal, use_Trailing}
Trade Direction = Only_Sell - use orders {Only_Buy, Only_Sell, Sell_and_Buy}
Final day = Friday - the final day of the transaction
Start Time = \"00:00\" - start time
End Time = \"23:59\" - end time
Filter News Forex Factory=false; - filter by news feed from Forex Factory
News Alert=true;
IncludeHigh=true;
IncludeMedium=true;
IncludeLow=false;
IncludeSpeaks=true;
STOP minutes before an event News = 90;
STOP minutes after an event News = 180;

", "url": "https://www.mql5.com/fr/market/product/34924", "small_icon": "https://c.mql5.com/31/298/gs-grid5-logo-60x60-5141.png", "middle_icon": "https://c.mql5.com/31/441/gs-grid5-logo-140x140-7125.png", "icon": "https://c.mql5.com/31/298/gs-grid5-logo-200x200-5105.png", "rating": 0, "price": 99, "published": 1547806614, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34771, "title": "HVK Mouse Buy Sell", "description": "

A simple panel to help you to place orders on the chart using the mouse.

Hold Left Shift or Left Ctrl and the panel will show the lines where it will place the order already with stop loss and take profit.

Use Shift to place buy orders and Ctrl to place sell orders, the panel will switch between stop or limit orders depending if the mouse is above or below the price.

Please be aware that Ctrl key is used by Metatrader to copy an object, try to avoid using this panel with charts where you copy objects with Ctrl.

", "url": "https://www.mql5.com/fr/market/product/34771", "small_icon": "https://c.mql5.com/31/989/hvk-mouse-buy-sell-logo-60x60-7937.png", "middle_icon": "https://c.mql5.com/31/989/hvk-mouse-buy-sell-logo-140x140-5776.png", "icon": "https://c.mql5.com/31/989/hvk-mouse-buy-sell-logo-200x200-8793.png", "rating": 0, "price": 30, "published": 1547751281, "popularity": 0.4166650910762272, "category": "Utility", "votes": 0 }, { "id": 34914, "title": "VWAP with Standarddeviation", "description": "

VWAP = Volume Weighted Average Price

The concept of VWAP is not equal to a normal Moving Average. The VWAP starts always with zero at the beginning of a new day and successively forms an average to the traded volume relative to price. Professional trading firms and institutions use VWAP for a measure of the real weighted trend of an underlying.

With the addition of the standard deviation you can spot support and resist at the outer boundaries.

", "url": "https://www.mql5.com/fr/market/product/34914", "small_icon": "https://c.mql5.com/31/298/vwap-with-standarddeviation-logo-60x60-8116.png", "middle_icon": "https://c.mql5.com/31/441/vwap-with-standarddeviation-logo-140x140-3831.png", "icon": "https://c.mql5.com/31/298/vwap-with-standarddeviation-logo-200x200-3993.png", "rating": 0, "price": 33, "published": 1547701141, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34901, "title": "Lite Hamster scalping MT5", "description": "

Lite Hamster Scalping

(Very Fast EA no Graphics)

The Lite Hamster Scalper is a Trading Robot with no use of Classic martingale. Schedule scalping Options. it uses some Indicators as a filter to maximize Correct entries.

Please to check The version 1.4 of Hamster Pro : Hamster_PRO_MT4 && Hamster_PRO_MT5

Recommendations :

Lot : 0.01.

Balance : 100 USD.

Pair : EURUSD.

TimeFrame : 5Min.

Spread : 30.

Broker : Trusted Brokers

Inputs descriptions :

Period Indicator1 - period of the first indicator.
Up level - the upper level of the first indicator, above which the EA will open Sell.
Down Level - the lower level of the first indicator, below which the EA will open Buy.
Max Lot - maximum lot size for the EA operation.
Virtual Take Profit - virtual take profit.
Virtual Stop Loss - virtual stop loss.
Max Orders - the maximum number of open orders.
Star Hour - the EA operation start hour.
End Hour - the EA operation end hour.

The Lite Hamster Scalper!

", "url": "https://www.mql5.com/fr/market/product/34901", "small_icon": "https://c.mql5.com/31/298/lite-hamster-scalping-mt5-logo-60x60-7056.png", "middle_icon": "https://c.mql5.com/31/445/lite-hamster-scalping-mt5-logo-140x140-7131.png", "icon": "https://c.mql5.com/31/298/lite-hamster-scalping-mt5-logo-200x200-9178.png", "rating": 0, "price": 0, "published": 1547645756, "popularity": 0.4213899927949891, "category": "Expert", "votes": 0 }, { "id": 34885, "title": "Hamster PRO MT5", "description": "

Hamster Pro

Hamster Pro

(Very Fast, Easy Setup, More Power!)

The Hamster Pro is a Trading Robot with no use of Classic martingale. Schedule scalping Options. it uses some Indicators as a filter to maximize Correct entries.

Recommendations :

Lot = 0.01.

Balance = 100 USD.

Pair = EURUSD.

TimeFrame = 5Min.

Broker = Trusted Brokers

Inputs descriptions :

Initial Lot - Initial lot size.
Virtual Take Profit - virtual take profit.
Virtual Stop Loss - virtual stop loss.
Max Orders - the maximum number of open orders.
Star Hour - the EA operation start hour.
End Hour - the EA operation end hour.
Max Spread - maximum spread, at which the EA is allowed to open and close positions.
Magic Number - magic number for the Expert Advisor to identify its positions.

The Hamster Scalper!

", "url": "https://www.mql5.com/fr/market/product/34885", "small_icon": "https://c.mql5.com/31/298/hamster-pro-mt5-logo-60x60-6373.png", "middle_icon": "https://c.mql5.com/31/441/hamster-pro-mt5-logo-140x140-2207.png", "icon": "https://c.mql5.com/31/298/hamster-pro-mt5-logo-200x200-6231.png", "rating": 0, "price": 45, "published": 1547643515, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34900, "title": "BRiCK TradeByArrow MT5 Free", "description": "

\r\n

* This product was converted using \"BRiCK Convert4To5 MT5\" based on the MQL4 source file of \"BRiCK TradeByArrow MT4 Free\".

BRiCK is a simple and versatile utility.
By combining Experts, Indicators and utilities like the Lego block, various trading styles can be realized.

\"TradeByArrow\" is Utility that executes order processing when an arrow object is created on the chart.
Combined with Indicator which outputs arrow object, it can be used like Expert.

Parameter

[ArrowName]

EntryBuy: Arrow object name for buy order (partial match)
EntrySell: Arrow object name for sell order (partial match)
Exit: Arrow object name for close order (partial match)

[Trade]

Lot: Volume to trade
Sllipage: Sllipage to trade
StopLoss: Loss margin based on acquisition price
TakeProfit: Profit margin based on acquisition price
MagicNumber: Magic number (Order identification number)

Procedure

1. Open the chart to be traded.

2. Insert the utility \"TradeByArrow\" on the open chart.

3. Insert the indicator that outputs the arrow object into the same chart.

4. When the graphical object specified by ArrowName is created on the chart, the following processing is executed.

When position does not exist
- EntryBuy: Execute buy order
- EntrySell: Execute sell order
- Exit: Do nothing

When buy position exist
- EntryBuy: Do nothing
- EntrySell: Close the buying position, execute the selling order
- Exit: Close purchase position

When sell position exist
- EntryBuy: After closing selling position, execute buy order
- EntrySell: Do nothing
- Exit: Close the selling position

Confirmation

- The free version can not be used in a real account.

- All arrow names must be different names.

- The method of judging the arrow name is partial match.

- All orders will be executed in a market order.

- Arrow object to be an execution trigger.

ID	Description
OBJ_ARROW_THUMB_UP	Thumbs Up
OBJ_ARROW_THUMB_DOWN	Thumbs Down
OBJ_ARROW_UP	Arrow Up
OBJ_ARROW_DOWN	Arrow Down
OBJ_ARROW_STOP	Stop Sign
OBJ_ARROW_CHECK	Check Sign
OBJ_ARROW_LEFT_PRICE	Left Price Label
OBJ_ARROW_RIGHT_PRICE	Right Price Label
OBJ_ARROW_BUY	Buy Sign
OBJ_ARROW_SELL	Sell Sign
OBJ_ARROW	Arrow

\r\n

", "url": "https://www.mql5.com/fr/market/product/34900", "small_icon": "https://c.mql5.com/31/298/brick-tradebyarrow-mt5-free-logo-60x60-4894.png", "middle_icon": "https://c.mql5.com/31/441/brick-tradebyarrow-mt5-free-logo-140x140-9699.png", "icon": "https://c.mql5.com/31/298/brick-tradebyarrow-mt5-free-logo-200x200-9010.png", "rating": 0, "price": 0, "published": 1547635588, "popularity": 0.029060645152782224, "category": "Utility", "votes": 0 }, { "id": 34879, "title": "High Trend Lite MT5", "description": "

The indicator High Trend Lite monitors 5 symbols in up to 3 timeframes simultaneously and calculates the strength of their \r\nsignals. The indicator notifies you when a signal is the same in different timeframes. The indicator can do this from just one chart. \r\nTherefore, High Trend Lite is a multicurrency and multitimeframe indicator.

\r\n\r\n\r\n

\r\n With the High Trend Pro, available at this \r\n link, you will have an unlimited number of symbols, 4 timeframes, a colourful chart of the primary MACD \r\n indicator, several color schemes, and stop levels for each symbol. You can also move High Trend Pro inside the chart and get \r\n notified about strong signals on your email or your smart-phone via push-notifications. \r\n

\r\n

High Trend Lite uses emproved versions of popular and highly demanded indicators for calculating its signals.

\r\n

High Trend Lite calculates the signal strength for the 5 symbols simultaneously. Click the symbol button in the indicator \r\ninterface to quickly access its signal strength in all selected timeframes (up to 3 timeframes).

\r\n

It is recommended to open a trade when a signal has been confirmed by at least 2 timeframes. The indicator then notifies that it has found a Super \r\nbuy or a Super sell.

\r\n

Other signals pulled by the indicator are: Strong buy, Buy, Strong sell, Sell, Neutral or Loading. \r\nThese signals may change quickly, especially in the lower timeframes. That is why a strong signal is the one confirmed by at least 2 \r\ntimeframes.

\r\n

The indicator can notify about a strong signal with a sound bip.

\r\n

\r\n\r\n\r\n

How to use this indicator

\r\n\r\n

1. I recommend using 2 timeframes - H4 and D1.

\r\n

2. Your signal should be a Super buy or a Super sell as a result of these 2 timeframes going one direction.

\r\n

3. A signal should be at the start of the lowest timeframe, so for the first 1-2 hours of the H4 timeframe. If you see a signal at 3-4 hour of the H4 \r\ntimeframe, you should pass it and see if it is still confirmed in the next period. This confirmation is now possible because a signal may \r\ndevelop for 2 periods, so one signal in the first H4 and same signal in the next H4.

\r\n

4. Be careful with your profit. For example, USDCHF can make 50 (500) pips for one move. While many symbols based on GBP can make as much as 150 \r\n(1500) pips.

\r\n

\r\n\r\n\r\n

Indicator Properties

\r\n\r\n

Fontsize - choose a different font size to fit the indicator text to your screen resolution.

\r\n

Timeframe 1

\r\n

Timeframe 2

\r\n

Timeframe 3

\r\n

\r\n\r\n\r\n

Comments to buttons in the chart

\r\n\r\n

bip - switches on a sound alert.

\r\n

size - changes the panel size. An extended panel shows prices of a strong signal in the top right corner and its target price levels.

\r\n

toggle - toggles the panel.

\r\n

Click any symbol in the panel to show the information for all timeframes in the top. A dot on the left means that the top shows information for this \r\nsymbol.

\r\n

Click any timeframe in the top to switch to the chart of that symbol and timeframe. A dot on the left means that it is the current chart and \r\ntimeframe.

", "url": "https://www.mql5.com/fr/market/product/34879", "small_icon": "https://c.mql5.com/31/298/high-trend-lite-mt5-logo-60x60-2130.png", "middle_icon": "https://c.mql5.com/31/446/high-trend-lite-mt5-logo-140x140-5543.png", "icon": "https://c.mql5.com/31/298/high-trend-lite-mt5-logo-200x200-9659.png", "rating": 5, "price": 0, "published": 1547576974, "popularity": 0.2529914747500253, "category": "Indicator", "votes": 1 }, { "id": 34805, "title": "HelloTraderDemo", "description": "

HelloTrader is a completely new product view for the MetaTrader \r\nplatform. Immediately after launching, the utility displays randomly one\r\n of the lines of the phrase, quotes of famous people or an aphorism in \r\nthe upper left corner of the terminal. Every 5 minutes the recording \r\nchanges.

\r\n

The Demo version includes 32 phrases, quotes or aphorisms in English only.

The utility starts working immediately after launch and no longer has any settings or functions. The only task is to randomly display quotes, phrases of famous and unknown people.

The utility is created for inspiration / assistance in human trafficking in the field of trading in the securities and currencies markets.

", "url": "https://www.mql5.com/fr/market/product/34805", "small_icon": "https://c.mql5.com/31/298/hellotraderdemo-logo-60x60-7670.png", "middle_icon": "https://c.mql5.com/31/440/hellotraderdemo-logo-140x140-7284.png", "icon": "https://c.mql5.com/31/298/hellotraderdemo-logo-200x200-6168.png", "rating": 0, "price": 0, "published": 1547446399, "popularity": 0.005653752944829743, "category": "Utility", "votes": 0 }, { "id": 34788, "title": "GapTrader", "description": "

Gap Trader Expert Advisor exploits one of the most common phenomena of the Forex market namely the weekend gap, a price difference between the last Friday’s closing price and the coming Monday’s opening one. This price jump is due to the fact that the interbank currency market continues to react on fundamental news during the weekend, opening on Monday at the most liquid level. Weekend Gaps are consistently been filled by the market and therefore fanatically traded by Forex expert traders. Gap Trader using H1 time frame fully automates the execution of the aforementioned strategy by:

Immediately spotting a weekend gap on Monday market opening and betting on its filling. Gap Trader can be used simultaneously in as many currency pairs as the user wants.
Managing all open positions with free-ride opportunity utilization orientation. (Trailing Stop Loss function)
Using the magic number feature to separate between any previous opened non-gap-trading positions and gap-trading ones, with the first being unaffected by the use of Gap Trader expert advisor. Magic number is also used for the distinction between gap-trading positions in different currency pairs.

Strategy Description

On Monday’s market open, if the Friday’s last H1 candle high (low) is lower (higher) than the Monday’s opening price by more than 10 pips, three short (long) positions, position A, B and C, are opened. From now on this price difference will be called gap. All three positions have an initial Stop Loss set at a user specified level, although the default Stop Loss level is set to 100 pips. Position A has a Take Profit level that is set one gap distance away from the opening price, TP A =1xgap, position B has a Take Profit level equal to two gaps distance from the opening price, TP B=2xgap, and position C does not have a Take Profit level. (Picture 1) Once position A is closed, in other words once the first gap distance is reached, position’s B and C Stop Loss is set to the zero loss level (Stop Loss A= Stop Loss B=opening price) and the Trailing Stop Loss Function kicks in starting the free-ride part of the strategy.

Gap Trader will close all positions that are still open by next Monday and whose gap distance has not been filled, letting open all wining bets and their free-riding potential for maximum profits.

Trailing Stop Loss Function

Once the 1xgap is filled the Trailing Stop Loss function will get into action. It starts a free ride position by setting position’s B and C Stop Loss level at the zero losspoint. Should the price move more to your favor it trails the stop loss level upwards for a long position or downwards for a short position maximizing your potential profits. The Trailing Stop Loss distance from the current price is set to a user defined level expressed in pips, with the default level set to 39 pips. (Picture2)

Magic Number Feature

Every Forex pair at the initialization of Gap Trader expert advisor should be given a unique non zero integer magic number value by the user. This number is essential to the function of the expert advisor as it is used on the one hand to distinguish between any non-gap-trading positions that are already open and the gap-trading positions and on the other hand between gap-trading positions on different Forex pairs.

Use of Gap Trader (Video)

In order to use Gap Trader in a Forex pair, the user has to open the pair’s corresponding chart window in H1 time frame and simply drag and drop Gap Trader icon from the list of expert advisors in the navigate window to that of the forex pair chart. Once you do that the parameter window will be shown.

\r\n

Description of Input Parameters

Lotsize:The bet size can be either an integer or a decimal value. Default value set to 1.
Magicnoumber:A unique non zero integer, non negative value for each pair
StopLossPips:Initial Stop Loss value expressed in number of pips away from the opening price. Its value should be an integer! Default value set to 100.
TraillingStopLossPips:The Stop Loss value that will be used when the Trailing Stop Loss function will be activated. It is expressed in the number of pips away from the current price. It should be an integer! and its default value set to 39. If the gap value is less that the inputted value then Gap Trader will set it equal to the gap value otherwise it will be left unaffected.

", "url": "https://www.mql5.com/fr/market/product/34788", "small_icon": "https://c.mql5.com/31/297/gaptrader-logo-60x60-1274.png", "middle_icon": "https://c.mql5.com/31/440/gaptrader-logo-140x140-2422.png", "icon": "https://c.mql5.com/31/297/gaptrader-logo-200x200-1093.png", "rating": 0, "price": 200, "published": 1547411531, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34750, "title": "Fx Karakurt", "url": "https://www.mql5.com/fr/market/product/34750", "small_icon": "https://c.mql5.com/31/297/fx-karakurt-logo-60x60-3864.png", "middle_icon": "https://c.mql5.com/31/440/fx-karakurt-logo-140x140-8585.png", "icon": "https://c.mql5.com/31/297/fx-karakurt-logo-200x200-6728.png", "rating": 0, "price": 70, "published": 1547249190, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34724, "title": "Inside Days Candlestick Bulkowski", "description": "

Inside Days Candlestick Bulkowski

The Inside days candlestick is a well-known candle pattern composed of two candles.

This indicator for showing outside days candlestick that describe by Thomas Bulkowski.

If you need for MetaTrader 4 version, please visit here:

https://www.mql5.com/en/market/product/34725

Feature Highlights

Show inside days candlestick.
Customizable \"Symbol\".
Customizable symbol distance from candlestick.

Input Parameters

Symbol - Input symbol code from \"wingdings\" for inside days candlestick (default is dot).
SymbolShift - Input symbol distance from candlestick.
SymbolColor - Input color for symbol (inside days).

Inside Days Candlestick definition by Thomas Bulkowski:

Inside days are a two-bar pattern.
Look for a Lower High and Higher Low on the second day.
The price bar fits inside the prior day's range.
The last bar cannot have the high price equal to the low price or four price doji (open = high = low = close price).

", "url": "https://www.mql5.com/fr/market/product/34724", "small_icon": "https://c.mql5.com/31/297/inside-days-candlestick-bulkowski-logo-60x60-3340.png", "middle_icon": "https://c.mql5.com/31/440/inside-days-candlestick-bulkowski-logo-140x140-1096.png", "icon": "https://c.mql5.com/31/297/inside-days-candlestick-bulkowski-logo-200x200-4686.png", "rating": 0, "price": 30, "published": 1547179764, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34656, "title": "DYJ MacdSto EA", "description": "

DYJ MacdSto EA uses MACD and Stochastic indicators to find signals.
Signals to buy are generated if the MACD line crosses over the SIGNAL line in the negative area below the MACD open level, and when Stochastic has crossed zoneBuy downwards, reached zoneBuy and then crossed back up through oversold.
Signals to sell are generated if the MACD line crosses under the SIGNAL line in the positive area above the MACD open level, and when Stochastic has crossed zoneSell upwards, reached zoneSell, and then crossed back down through overbought.

The EA works in any trading session. The work time1 and work time2 and work time3 parameter is intraday. It means that if you want to set a working time from 19:00 PM to 05:00 AM, for example, you should define two different intervals, such as 19:00 to 23:59 and 00:00 to 05:00.

The EA opens orders at a specific news time, such as 19:59 to 20:03 and M1 to H1 timeframe.

For more convenient search, the working timeframe has been added to inputs (Work timeframe). This is the timeframe indicators are built on and the EA receives Open prices from. Therefore, the EA is recommended for the EURGBP H1 timeframe.

Default settings are provided as example using USG variable spread ticks data for 20180101-20181231 years on EURGBP pair.

Input:

InpMagic:Magic number;
InpTimeframe:Work timeframe;
InpLots:Lots;
InpMaxOrders:Max Orders;
InpCurrentOrders = 1 -- Current Orders Number
InpMaxProfits = 10 -- InpMaxProfits($)/0.01Lots If Orders>OrdersNumber and profit>InpMaxProfits then close all orders.
InpTakeProfit = 200 --Take Profit
InpStopLoss = 100 -- Stop LossInp
TrailingStop = 100 -- Trailing Stop (min distance from price to Stop Loss, in pips
InpTrailingStep = 5 -- Trailing Step, in pips (1.00045-1.00055=1 pips)
IsUseTradingTime = false - set to false to trade all the time, set to true to use trading time defined below.
startTime1 = 08:15 - start hour of work time 1.
end\bTime1 = 08:35 - final hour of work time 1.
startTime2 = 13:45 - start hour of work time 2.
end\bTime2 =14:42 - final hour of work time 2.
startTime3 = 22:15 - start hour of work time 3.
end\bTime3 = 22:45 - final hour of work time 3.

", "url": "https://www.mql5.com/fr/market/product/34656", "small_icon": "https://c.mql5.com/31/297/dyj-macdsto-ea-logo-60x60-4006.png", "middle_icon": "https://c.mql5.com/31/445/dyj-macdsto-ea-logo-140x140-9230.png", "icon": "https://c.mql5.com/31/297/dyj-macdsto-ea-logo-200x200-9925.png", "rating": 0, "price": 30, "published": 1547101988, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34670, "title": "Forex Abrams", "url": "https://www.mql5.com/fr/market/product/34670", "small_icon": "https://c.mql5.com/31/296/forex-abrams-logo-60x60-5905.png", "middle_icon": "https://c.mql5.com/31/441/forex-abrams-logo-140x140-5726.png", "icon": "https://c.mql5.com/31/296/forex-abrams-logo-200x200-8963.png", "rating": 0, "price": 50, "published": 1547043224, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34663, "title": "Forex Ilan Barbudos", "url": "https://www.mql5.com/fr/market/product/34663", "small_icon": "https://c.mql5.com/31/296/forex-ilan-barbudos-logo-60x60-3320.png", "middle_icon": "https://c.mql5.com/31/445/forex-ilan-barbudos-logo-140x140-9733.png", "icon": "https://c.mql5.com/31/296/forex-ilan-barbudos-logo-200x200-6719.png", "rating": 4, "price": 50, "published": 1547030075, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 33639, "title": "PipFinite Breakout EDGE MT5", "description": "

The Missing Edge You Need To Catch Breakouts Like A Pro.

Follow a step-by-step system that detects the most powerful breakouts!

Discover market patterns that generate massive rewards based on a proven and tested strategy.

Unlock Your Serious Edge

Important information here ► www.mql5.com/en/blogs/post/723208

The Reliable Expert Advisor Version

Automate Breakout EDGE signals using \"EA Breakout EDGE\" ► Click Here

Have access to the game changing strategy that will take your trading to the next level.

Benefits You Get

Unique price action based algorithm that is proven to work on any market condition.
Powerful combination to any trading strategy.
Auto-detects entry, exit, stop loss & take profit levels.
Auto-calculates statistics of signals.
Never repaints, never backpaints, never recalculates.
Signals strictly on the \"Close of the bar\".
Works in any timeframe and financial instrument including forex, cryptocurrencies, metals, stocks, indices.
Integrated pop-up, email, push notification and sound alerts.
Indicator buffers fully compatible with Expert Advisor (EA) development.

How To Trade

Execute your trades in 3 Simple Steps!

Step 1: Ideal Trade Setup.

Enter a signal if Success Rate is at least 66% (Success Rate ≥ 66%)

Step 2: Set Stop Loss.

Option 1: Recent Swing - Stop loss calculated by the indicator.
Option 2: Opposite Signal.

Exit buy signal on a new sell signal.
Exit sell signal on a new buy signal.

Step 3: Set Take Profit.

Option 1: Take profit on TP1.
Option 2: Partial take profit on TP1 and close remaining position on TP2.
Option 3: Take profit on opposite signal to maximize strong breakouts.

Automatic Statistics Calculation

Reliable information that will give you the confidence in filtering your trades.

Win Condition

TP1 Hit - When a signal reaches at least TP1.
EXIT Win - When a trade is closed on opposite signal and resulted to a positive profit.

Loss Condition

SL Hit - when a signal reaches Stop Loss.
Exit Loss - When trade is closed on the opposite signal and resulted to a negative profit.

Success Rate

Percentage of signals which qualified for win condition.
Used as reference to find better pairs and timeframes.

Parameters

Period - the number of bars used to calculate the algorithm.
Range Filter - the factor used to filter ranging markets.
Stop Loss Mode - the stop loss used for calculation.

Recent Swing - the Indicator will place stoploss based on the recent swing highs and lows
Opposite Signal - there will be no stoploss but trades will be closed on the opposite signal.

Target Factor - the multiplier used to calculate take profit levels.
Maximum History Bars - maximum number of bars used for calculation.
Misc Parameters - controls the universal visibility of objects and buffers.
Display Parameters - controls the visibility of objects drawn on chart.
Graphics Parameters - controls the appearance and colors of drawn objects on chart.
Dashboard Parameters - controls the visibility and colors of statistics found on chart.
Alert Parameters - controls the alert options enabled.

User Manual

For more information ► Click Here", "url": "https://www.mql5.com/fr/market/product/33639", "small_icon": "https://c.mql5.com/31/295/pipfinite-breakout-edge-mt5-logo-60x60-8059.png", "middle_icon": "https://c.mql5.com/31/446/pipfinite-breakout-edge-mt5-logo-140x140-5423.png", "icon": "https://c.mql5.com/31/295/pipfinite-breakout-edge-mt5-logo-200x200-8820.png", "rating": 4.806451797485352, "price": 98, "published": 1547004560, "popularity": 0.528744808947565, "category": "Indicator", "votes": 93 }, { "id": 34554, "title": "EA Black Scorpion MT5", "description": "

The EA uses the strategy based on breakout.

Breakout trading is one of the most popular and most frequently used strategies among Forex traders. This strategy has been developed a long ago and has been repeatedly tested on history data, showing superior results.

The EA uses 3 types of trend breakouts, (support and resistance breakout, downtrend breakout, uptrend breakout).

The EA uses a very small SL so the account is always protected from equity drawdown with a very low risk-per-trade.

It uses an adaptive trailing stop algorithm.

The EA uses a system of closing positions during slippages.

It was backtested and optimized using real ticks with 99,9% quality. It has successfully completed stress testing.

The EA contains the algorithm of statistics collection with output on the information panel.

Monitoring M30: https://www.mql5.com/en/signals/796222

МetaТrader 4 version: https://www.mql5.com/en/market/product/15313

pair/timeframe: EURUSD M30, EURUSD H1, USDJPY M30, USDJPY H1, GBPUSD M30, GBPUSD H1.

Recommended pair/timeframe: EURUSD H1, USDJPY H1 or EURUSD M30, USDJPY M30

Attention! This EA is only for \"hedging\" accounts.

Requirements and Recommendations

Before using on a live account, test the EA with minimal risk.
Low spreads + low commission + high quality execution are important when choosing a broker to trade.
Use VPS server with minimal network latency to the broker's server;
Maximum Spread — from 0 - 20 points ( 0.0 to 2.0 pips).
Maximum Stop Level — from 0 - 5 points ( 0.0 to 0.5 pips).
Maximum freeze level — 0 points ( 0.0 pips).
Leverage of 1: 100 or more is recommended.
if you use several advisors on the same account, make sure that all the advisors have different Magic numbers.

Parameters

Information panel:

Show_Info_Panel — Information panel. (at the value false - Speeds up the testing in the strategy tester).

Magic:

Magic — trades identifier.

Comment:

Order_Comment— Comments to the order.

Slippage:

Slippage — Allowed slippage before an order triggers.

Spread settings:

Max_Spread — Maximum Spread allowed before pending order is triggered.

Type of trade:

Order_Type — trading direction.

Fixed Lot:

Fixed_Lot — Fixed lot ( if \"Use_Risk_MM\" = false ).

Risk Money Management:

Use_Risk_MM — At the value 'true' the lot size increases as the account balance grows.( Risk Management ).
Percentage_Risk — Increase the lot size based on balance.( Risk Management % ).

Take Profit:

Take_Profit — Take profit level in points.

Stop loss:

Stop_Loss — Stop loss in points.

Settings of moving Stop Loss to breakeven.

Use_Break_Even — If this is true Stoploss price will be moved to breakeven when price is above target points.
Breakeven_Target_PipsInp — When price is above this value breakeven will be triggered.
Breakeven_Jump_PipsInp — Stoploss will be moved using this value to breakeven.

Trailing Stop settings.

Use_Trailing — If this is true, profit will be protected with trailing stop.
Trailing_Stop — Trailing points, when the position is in profit.
Trailing_Step — Trailing step, when the position is in profit.

Adaptive trailing:

Adaptive_Trailing_to_slippages — Adaptive trailing stop.
Change_correction_coefficient — Trailing sensitivity coefficient.
Adaptive_by_Time — Algorithm of adaptive trailing by time.
Time_Scale — Time interval for price analysis.

Trading by time within the day:

Use time — If true trading will be performed by time.
Time_Setting — Server time or computer time.
GMT_mode = GMT offset of the broker server time; ( 0 - not used ).
Every_Day_Start — Operation start time (hh:mm).
Every_Day_End — Operation end time (hh:mm).

Operation end time on Friday:

Use time — If true trading will be performed by time.
Time_Setting — Server time or computer time.
GMT_mode = GMT offset of the broker server time; ( 0 - not used ).
Disable_in_Friday — Operation end time on Friday (hh:mm).

Our group in mql5: 016a118dc374d801

", "url": "https://www.mql5.com/fr/market/product/34554", "small_icon": "https://c.mql5.com/31/296/ea-black-scorpion-mt5-logo-60x60-4422.png", "middle_icon": "https://c.mql5.com/31/438/ea-black-scorpion-mt5-logo-140x140-6610.png", "icon": "https://c.mql5.com/31/296/ea-black-scorpion-mt5-logo-200x200-1976.png", "rating": 1, "price": 110, "published": 1546954696, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 34286, "title": "Bezdrev HFT expert advisor", "description": "

Provides automated (HFT) trading, manual trading, and alerts, with a manager panel.

Utilises bollinger bands, moving averages, Parabolic SAR, pivots and pending orders with range breakout.

Allows linking takeprofit, stoploss, Sound & push-notifications, buy & sell triggers, to customizable indicators; 8 moving averages, 3 Bollinger bands, PSAR, and daily pivots.

A grasp of the configurability:
Active market hours requirement for all majors.
set timer intervals per timeframe trade trigger.
Multiple seperators & invert usage of seperators. (only buy/sell above/below).
Enable/disable sending takeprofit & stoploss to server, with configurable timer.
Allow takeprofit updates further from current price.
Set minimal loss in points for all activated SL triggers, minimal profit in points for all activated takeprofit triggers.
Disable button mirroring, for manual trend trading.
Loading .set files saved from optimizations will automatically enable the relevant buttons for easy manual visual strategy analysing.
", "url": "https://www.mql5.com/fr/market/product/34286", "small_icon": "https://c.mql5.com/31/293/bezdrev-hft-expert-advisor-logo-60x60-3702.png", "middle_icon": "https://c.mql5.com/31/446/bezdrev-hft-expert-advisor-logo-140x140-4558.png", "icon": "https://c.mql5.com/31/293/bezdrev-hft-expert-advisor-logo-200x200-2613.png", "rating": 0, "price": 200, "published": 1546907072, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34524, "title": "CyberTrend MT5", "description": "

\r\n CyberTrend is a fully automatic Expert Advisor based on advanced algorithms for short term trend prediction. This \r\n EA uses several custom made indicators combined with candles prediction that helps to achieve a very high-rate of winning trades.\r\n

\r\n\r\n\r\n

\r\n

This EA successfully passed long term back-test with real tick data, variable spread, real commision and swap from Metatrader 5 \r\n Strategy Tester.

\r\n

CyberTrend is also fully adjustable by user. Please read the blog to get more information about FAQ and settings parameters.

\r\n

\r\n\r\n\r\n

\r\n

Link to blog: https://www.mql5.com/en/blogs/post/723502

\r\n

Detailed information can be found here: >> \r\n LINK <<

\r\n

Recommendations

\r\n

\r\n\r\n\r\n

M15 Timeframe
EURUSD
ECN broker is always recommended for automated trading (but not limited to other brokers).
Leverage 1:200 or higher
deposit 1500 USD

\r\n

\r\n\r\n\r\n

\r\n

\r\n
Watch my other products:
\r\n
https://www.mql5.com/en/users/sevenfourseven/seller

\r\n

\r\n\r\n\r\n

Parameters

\r\n\r\n

\r\nGeneral Settings

\r\n\r\n\r\n

\r\n

Magic - Magic number
CommentOrders - Order comments
ShowInfoPanel - Show/Hide info panel
GMT - Broker GMT (usually 2 for most ECN brokers)
TradingMode - Pre-optimized trading modes. If you want to trade own settings in Strategy Settings section set \r\n TradingMode to \"Custom\"

\r\n

\r\nRisk Settings

\r\n\r\n\r\n

\r\n

BaseLot - Base Lot size
StepLot - Step Lot size
MaxLot - Max Lot size
StopLoss - 0 (No StopLoss), > 0 (Use StopLoss)
MaxSlippage - Max slippage
UseSpreadProtection - Enable/Disable spread protection
MaxSpread - Max spread for spread protection
UseEquityProtection - Enable/Disable draw-down protection
CloseAtCurrencyDD - Will close all trades if draw-down in currency is greater \r\n than CloseAtCurrencyDD

\r\n

Note: Whole Strategy Settings section has effect only if TradingMode is set to \"Custom\"

\r\n

\r\nBasic Strategy Settings

\r\n\r\n\r\n

ThresholdClose - Threshold for orders closure
ThresholdAdd - Threshold for orders addition
MaxOrders - Maximum number of placed orders

\r\n

\r\nAdvanced Strategy Settings

\r\n\r\n\r\n

Predictor - Parameter for actual bars prediction
ConfirmDistance - Distance parameter for actual bars confirmation
UseLongConfirm - Enable/Disable long term bars confirmation
PredictorLong - Parameter for long term bars confirmation
LongPeriod - Period for long term confirmation
UseMediumConfirm - Enable/Disable Medium term bars confirmation
PredictorMedium - Parameter for medium term bars confirmation
MediumPeriod - Period for medium term confirmation

\r\n

\r\nNews Filter Settings

\r\n

News filter never works in back-test !!

\r\n

Note: For the news filter function in the terminal go to: \"Tools -> Options -> Expert Advisors\" and add the \r\n\"http://ec.forexprostools.com/\" to the Allowed URLs

\r\n\r\n\r\n

HighImpactNews - Enable/Disable High impact news filter
HighStopMinutesBefore - Minutes before high impact news that EA won't open new position
HighStopMinutesAfter - Minutes after high impact news that EA won't open new position
MediumImpactNews - Enable/Disable Medium impact news filter
MediumStopMinutesBefore - Minutes before medium impact news that EA won't open new position
MediumStopMinutesAfter - Minutes after medium impact news that EA won't open new position
LowImpactNews - Enable/Disable Low impact news filter
LowStopMinutesBefore - Minutes before low impact news that EA won't open new position
LowStopMinutesAfter - Minutes after low impact news that EA won't open new position

", "url": "https://www.mql5.com/fr/market/product/34524", "small_icon": "https://c.mql5.com/31/295/cybertrend-mt5-logo-60x60-3296.png", "middle_icon": "https://c.mql5.com/31/446/cybertrend-mt5-logo-140x140-2852.png", "icon": "https://c.mql5.com/31/295/cybertrend-mt5-logo-200x200-6665.png", "rating": 0, "price": 55, "published": 1546889422, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34478, "title": "HelloTrader", "description": "HelloTrader is a completely new product view for the MetaTrader platform. Immediately after launching, the utility displays randomly one of the lines of the phrase, quotes of famous people or an aphorism in the upper left corner of the terminal. Every 5 minutes the recording changes.

The structure includes more than 1000 phrases, quotes and aphorism in Russian and English.

In the input parameters, you can choose the Russian language display of records, the default is English.

The utility starts working immediately after launch, and no longer has any settings or functions other than the choice of language. The only task is to randomly display quotes, phrases of famous and unknown people.

The utility is created for inspiration / assistance in human trafficking in the field of trading in the securities and currencies markets.", "url": "https://www.mql5.com/fr/market/product/34478", "small_icon": "https://c.mql5.com/31/295/hellotrader-logo-60x60-1695.png", "middle_icon": "https://c.mql5.com/31/438/hellotrader-logo-140x140-2952.png", "icon": "https://c.mql5.com/31/295/hellotrader-logo-200x200-8666.png", "rating": 0, "price": 0, "published": 1546764430, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 34460, "title": "High Trend MT5", "description": "

The indicator High Trend Pro monitors a big number of symbols in up to 4 timeframes simultaneously and calculates the strength of their signals. The indicator notifies you when a signal is the same in different timeframes. The indicator can do this from just one chart. Therefore, High Trend Pro is a multicurrency and multitimeframe indicator.

High Trend Pro uses emproved versions of popular and highly demanded indicators for calculating its signals.

High Trend Pro calculates the signal strength for all selected symbols. Click the symbol button in the indicator interface to quickly access its signal strength in all selected timeframes (up to 4 timeframes).

The first start of the indicator with more than 10 symbols may require several seconds to load all data. From then on, the indicator works correctly with all symbols in one chart.

It is recommended to open a trade when a signal has been confirmed by at least 2 timeframes. The indicator then notifies that it has found a Super buy or a Super sell.

Other signals pulled by the indicator are: Strong buy, Buy, Strong sell, Sell, Neutral or Loading. These signals may change quickly, especially in the lower timeframes. That is why a strong signal is the one confirmed by at least 2 timeframes.

The indicator can notify about a strong signal with a sound bip or a push-notification. You will need to set up push notifications in the menu of MetaTrader.

How to use this indicator

1. I recommend using 2 timeframes - H4 and D1.

2. Your signal should be a Super buy or a Super sell as a result of these 2 timeframes going one direction.

3. A signal should be at the start of the lowest timeframe, so for the first 1-2 hours of the H4 timeframe. If you see a signal at 3-4 hour of the H4 timeframe, you should pass it and see if it is still confirmed in the next period. This confirmation is now possible because a signal may develop for 2 periods, so one signal in the first H4 and same signal in the next H4.

4. Be careful with your profit. For example, USDCHF can make 50 (500) pips for one move. While many symbols based on GBP can make as much as 150 (1500) pips.

Indicator Properties

Color preset - you can choose from four.

Fontsize

Notify mode - Push, Print, Print_and_Push or Muted. A push notification is sent to your smartphone if you set it up. Printing is done to the \"Experts\" tab.

Notify interval (minutes) - number of minutes after which push notifications about strong signals to your smartphone are sent. Set up push settings via the menu \"Tools > Options > Notifications\".

Symbols source - there are 2 options: Market_Watch or Custom_List. For the Market_Watch, the indicator monitors and looks for signals for all the symbols currently started in the Market Watch window. For the Custom_List, it is for all symbols listed in the property Symbols custom list.

Symbols custom list - it is a comma-separated list of your symbols which the indicator monitors and for which it looks for signals. You need to choose Custom_List for the property Symbols source.

Timeframe 1

Timeframe 2

Timeframe 3

Timeframe 4

Global stoploss - minimal distance from the current price, after which the High Trend Pro tries to find a stoploss level by the nearest bar extrema in the current chart. Use pips.

Global takeprofit - minimal distance from the current price, after which the High Trend Pro tries to find a takeprofit level by the nearest bar extrema in the current chart. Use pips.

", "url": "https://www.mql5.com/fr/market/product/34460", "small_icon": "https://c.mql5.com/31/298/high-trend-mt5-logo-60x60-9671.png", "middle_icon": "https://c.mql5.com/31/440/high-trend-mt5-logo-140x140-7049.png", "icon": "https://c.mql5.com/31/298/high-trend-mt5-logo-200x200-6951.png", "rating": 0, "price": 45, "published": 1546728418, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34505, "title": "KT Psar Arrows MT5", "description": "

KT Psar Arrows trace des flèches sur le graphique en utilisant l'indicateur standard Parabolic SAR. Une flèche haussière est tracée lorsque le plus haut de la bougie touche le SAR. Une flèche baissière est tracée lorsque le plus bas de la bougie touche le SAR. Les signaux sont générés en temps réel sans attendre la clôture de la bougie.

Fonctionnalités

Un outil utile pour les traders souhaitant expérimenter des stratégies de trading intégrant l'indicateur Parabolic SAR.
Peut être utilisé pour détecter des points de retournement sur le marché.
Supporte des entrées personnalisées pour le PSAR.
Prend en charge toutes les alertes disponibles sur MT4.

Remarque : Le Parabolic SAR est un indicateur retardé et strictement mécanique. Chaque signal de trading potentiel doit être filtré à l'aide de règles clairement définies.

Paramètres d'entrée

Pas du PSAR : Insérer la valeur du pas.
Valeur maximale du PSAR : Insérer la valeur maximale.
Afficher les points PSAR : Afficher/masquer les points PSAR. Les flèches fonctionneront normalement même sans l'affichage des points PSAR.
Les autres paramètres sont explicites.

", "url": "https://www.mql5.com/fr/market/product/34505", "small_icon": "https://c.mql5.com/31/295/kt-psar-arrows-mt5-logo-60x60-8756.png", "middle_icon": "https://c.mql5.com/31/441/kt-psar-arrows-mt5-logo-140x140-4381.png", "icon": "https://c.mql5.com/31/295/kt-psar-arrows-mt5-logo-200x200-9603.png", "rating": 5, "price": 30, "published": 1546637811, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 34008, "title": "DYJ Bands EA MT5", "description": "

The DYJBands opens and closes positions using Bollinger Bands signals: It performs trades after a price rebound from the borderlines of the indicator. It has the option to close positions by an opposite signal, by take profit and stop loss, move a trade to breakeven upon reaching the central Bollinger band or after a certain price movement.

By default, the EA is configured for trading the GBPUSD currency pair on the H1 timeframe. Also, settings for the EURUSD, USDJPY, USDCAD and XAUUSD currency pairs will be provided in the Comments section.

The Expert Advisor also features money management, traditional SL, TP and trailing stop. Only two orders are used for trading each instrument, which ensures maximum safety of trading.

The EA does not use risky trading methods, and can trade on most of currency pair and timeframe. In addition, it does not cost much, and its settings are quite simple, which can be good for both experienced

and novice traders.

The EA opens orders at a specific news time, such as 19:59 to 20:03 and M1 to H1 timeframe.

Input parameters

MagicNumber - unique identifier (use different magic numbers if multiple Expert Advisors run in your terminal);
BandsPeriod - Bollinger bands period;
BandsDeviations - Bollinger bands deviations;
BandsAppliedPrice - Bands applied price；
StochKPeriod - Stoch K Period
StochDPeriod - Stoch D Period;
StochSlowing - Stoch Slowing;
StochMode - Stoch Mode;
StochPriceField - Stoch Price Field;
StochLevelUp - Limits of overbought area；
StochLevelDown - Limits of oversold area；
TimeFrame - Chart timeframe;
Lots - Lot size;
MaxOrders - Maximum postions number;
TrailingStop - trailing stop value in points (distance from the current price of the currency pair), if set to 0, trailing stop is not used;
IsUseTradingTime = false - set to false to trade all the time, set to true to use trading time defined below.
startTime1 = 08:15 - start hour of work time 1.
end\bTime1 = 08:35 - final hour of work time 1.
startTime2 = 13:45 - start hour of work time 2.
end\bTime2 =14:42 - final hour of work time 2.
startTime3 = 22:15 - start hour of work time 3.
end\bTime3 = 22:45 - final hour of work time 3.

", "url": "https://www.mql5.com/fr/market/product/34008", "small_icon": "https://c.mql5.com/31/293/dyj-bands-logo-60x60-8944.png", "middle_icon": "https://c.mql5.com/31/441/dyj-bands-ea-mt5-logo-140x140-6506.png", "icon": "https://c.mql5.com/31/293/dyj-bands-logo-200x200-2686.png", "rating": 0, "price": 30, "published": 1546624749, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34474, "title": "Just Copier Pro MT5", "description": "

If you want to share your trading signal, but you do not want to distribute your investor password, this product is fit with you.

\r\n

\"Just copier Pro\" is designed to copy trading without any complicated settings. The copy can be done in one PC or over the internet.

One EA can be set as master (provider) or slave (receiver). The receiver lot can be set to multiple providers lots.

In \"Globe\" mode, the signal provider (master) have to give the password to signal receiver,

(the password that is set in slave side should be same with the password in the master side).

And also, you have to input \"http://fxina.hostingerapp.com\" as allowed URL in terminal Tools - Options - Expert Advisors.

Any type of copy is available.

MT4 -> MT5

MT4 -> MT4

MT5 -> MT5

MT5 -> MT4

If you want to copy MT4 -> MT5 or MT5 -> MT4, please purchase \"Just Copier Pro MT4\" and \"Just Copier Pro MT5\" separately.

Just Copier Pro can copy Pending Orders, Stoploss and Takeprofit.

In one terminal, \"Just Copier Pro\" can be functioning as a Master and at the same time also as a Slave. So that Just Copier Pro can be used as a tool to copy trading as a Slave and then immediately send trading signals as a Master.

Slave mode can copy several Masters.

Button on Master / Slave: shows Running / Stop

Special features:

Prefix: mark at the beginning of the symbol

Suffix: sign at the end of the symbol

Copy mode:

ByTicket: Copy trading based on each Order Ticket on the Master (for using on hedging account)

BySymbol: Copy trading based on Order Symbols that OP on the Master (for using on hedging account and netting account)

Copy Buy: true / false

Copy Sell: true / false

Copy Stop Loss: true / false

Copy Take Profit: true / false

Copy Pending Orders: true / false

Reverse Trading: to copy trading in opposite directions, including pending orders (Buy <> Sell, BuyLimit <> SellStop, BuyStop <> SellLimit)

Lot Multiply - copy of trades with the lot size increased by the specified multiplier.

Timer (in seconds) - event generation period of the timer for the copier operation. The greater the period, the less the load on the terminal.

", "url": "https://www.mql5.com/fr/market/product/34474", "small_icon": "https://c.mql5.com/31/295/just-copier-pro-mt5-logo-60x60-8373.png", "middle_icon": "https://c.mql5.com/31/441/just-copier-pro-mt5-logo-140x140-3482.png", "icon": "https://c.mql5.com/31/295/just-copier-pro-mt5-logo-200x200-5707.png", "rating": 0, "price": 100, "published": 1546563541, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 34433, "title": "TradeKeeper Pro MT5", "description": "

The utility TradeKeeper Pro allows you to open a trade manually with a magic and a volume of your choice. It does not open its own trades, it can only open a trade by your command.

TradeKeeper Pro can trail any open trades by the iSAR (parabolic) indicator, and a simple trail. It can set the stoploss level at the open price as soon as possible. To trail any open trades for any instruments, it suffices to launch the utility in one chart.

TradeKeeper Pro can close any trades or pending orders of a specific type. Using the utility buttons, you can close all, close all profitable, close trades upon reaching a profit target, close all losing, close all limit orders or close all stop orders.

TradeKeeper Pro can show your profits for different periods and bip a sound when you reach a profit target value. Click the tachometer to quickly switch to the next profit period. There are 5 of them: This Day, This Week, This Month, Last 90 Days and All I Made.

Click the minus/plus button in the corner to collapse or expand all data.

The profit calculation takes into account swaps and commissions.

Properties of the TradeKeeper Pro:

Color preset - you can choose among 4 for now.

Fontsize - helps fit texts to your screen resolution.

Corner - choose where to place your data: Left_Upper corner, Left_Lower corner, or Right_Lower corner.

Magic - your magic number to keep account of. It is handy if you have several strategies and you want to see the stats for only one of them.

Mode - three modes are available: Dashboard_and_Gauge, Gauge, and Dashboard.

Profit period - how your tachometer calculates profits by default: This Day, This Week, This Month, Last 90 Days or All I Made.

Profit max - it is used for creating your tachometer. It should be a positive value in your deposit currency.

Profit min - it is used for creating your tachometer. It should be a negative value in your deposit currency.

Profit target - you indicate this in your deposit currency. The TradeKeeper Pro calculates the current profit value as a difference of Equity and Balance. When the target you set is reached, the TradeKeeper Pro notifies you with a sound.

Stoploss - use pips.

Takeprofit - use pips.

Trail - use pips. To start trailing using a simplу trail, activate the simple button in the chart.

Volume - a volume for trades opened by the buy and sell buttons in the chart. Set a fixed value (example: 0.01), or a percentage of equity (example: 0.03%).

Comments to the buttons in the chart:

lock - locks all actions of the advisor to the symbol in which the advisor is working. If there are several trades of different symbols, and the button \"close profit\" is clicked, the advisor will only close trades of this symbol. It also shows the stats of only the current symbol.

dynamic - activates a search of stoploss and takeprofit levels by the nearest bar extrema. These levels may not be closer then the values of stoploss and takeprofit currently set.

simple - activates a simple trailing-stop. The value is set with the property Trail.

iSAR - activates a trailing-stop following the iSAR (parabolic) indicator. It is recommended if you like to open lengthy, trending trades with a large takeprofit value.

zero - a stoploss is going to be set at the open price line as soon as the trade gets profitable.

sound - activates sounds of a new trade, a trailing-stop move, and a closed trade.

buy - opens a buy in the current chart with a magic and a volume of your choice.

sell - opens a sell in the current chart with a magic and a volume of your choice.

full - shows / hides most buttons.

clear levels - reset existing stoploss and takeprofit values.

close all - closes all open trades and pending orders.

close profit - closes all currently profitable trades.

close target - close trades upon reaching a profit target as defined by the value of \"Profit target\". It may be a negative value. If it is several trades, it should be their common profit. You may limit trades by a magic or by clicking the symbol button. A current profit target is indicated by the tachometer.

close loss - closes all currently losing trades.

close limits - closes all pending limit orders (reversal orders).

close stops - closes all pending stop orders (continuation orders).

", "url": "https://www.mql5.com/fr/market/product/34433", "small_icon": "https://c.mql5.com/31/298/tradekeeper-pro-mt5-logo-60x60-7604.png", "middle_icon": "https://c.mql5.com/31/441/tradekeeper-pro-mt5-logo-140x140-9824.png", "icon": "https://c.mql5.com/31/298/tradekeeper-pro-mt5-logo-200x200-1724.png", "rating": 0, "price": 45, "published": 1546507047, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 34447, "title": "KT Auto Fibo MT5", "description": "

KT Auto Fibo trace automatiquement les niveaux de retracement de Fibonacci en fonction de la direction actuelle de la tendance. Les points hauts et bas sont sélectionnés automatiquement en utilisant les points maximum et minimum disponibles sur le graphique. Vous pouvez zoomer, dézoomer et faire défiler pour ajuster les niveaux de Fibonacci en conséquence.

Modes

Automatique : Trace automatiquement les niveaux de Fibonacci en fonction de la zone visible du graphique.
Manuel : Trace les niveaux de Fibonacci une seule fois. Par la suite, vous pouvez ajuster manuellement les points d'ancrage.

Utilisation :

Aide à prévoir logiquement les objectifs de profit futurs.
Possibilité élevée de retournement lorsqu’il est combiné avec des niveaux de support/résistance ou des lignes de tendance.
Offre une entrée à faible risque dans un marché en tendance.

Paramètres d'entrée

Automatique : Trace les niveaux de retracement de Fibonacci sans intervention humaine.
Manuel : Trace les niveaux de retracement de Fibonacci une seule fois. Ensuite, vous pouvez étirer les points d'ancrage manuellement.
Afficher la zone non retracée : Affiche/masque sur le graphique la zone encore intacte par le retracement du prix.
Les autres paramètres sont explicites.

", "url": "https://www.mql5.com/fr/market/product/34447", "small_icon": "https://c.mql5.com/31/295/kt-auto-fibo-mt5-logo-60x60-8518.png", "middle_icon": "https://c.mql5.com/31/441/kt-auto-fibo-mt5-logo-140x140-9243.png", "icon": "https://c.mql5.com/31/295/kt-auto-fibo-mt5-logo-200x200-1278.png", "rating": 5, "price": 30, "published": 1546466298, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 34427, "title": "KT Pin Bar MT5", "description": "

KT Pin Bar identifies the pin bar formation which is a type of price action pattern which depicts a sign of reversal or rejection of the trend. When combined with support and resistance, BRN and other significant levels, Pin Bar pattern proved to be a very strong sign of reversal.

Basically, a pin bar is characterized by a small body relative to the bar length which is closed either in upper or lower 50% part of its length. They have very large wicks and small candle body.

A pin bar candlestick can be bullish or bearish, but as long as its structure meets the characters of perfect pin bar, the color of the candle doesn't really matter.

\r\n

MT4 version of the same indicator is available here KT Pin Bar MT4

Features

Depicts significant reversal points near Support/Resistance level.
Suitable for swing trading strategies.
Define the candle max. and min. size in pips.
Alerts included.

Input Parameters

Pin Bar Depth: Define the nose to body ratio in percentage.
Max. Range in Pips: Max. size for the pin bar.
Min. Range in Pips: Min. size for the pin bar.
Rest of the inputs are self-explanatory.

", "url": "https://www.mql5.com/fr/market/product/34427", "small_icon": "https://c.mql5.com/31/294/kt-pin-bar-mt5-logo-60x60-4357.png", "middle_icon": "https://c.mql5.com/31/440/kt-pin-bar-mt5-logo-140x140-7897.png", "icon": "https://c.mql5.com/31/294/kt-pin-bar-mt5-logo-200x200-6106.png", "rating": 0, "price": 30, "published": 1546438832, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34420, "title": "Constrictors", "description": "

Professional Constrictors Expert Advisor follows the market using the Parabolic Stop and Reverse system indicator. At each Parabolic SAR indicator signal, a position is opened in the direction approaching the indicator. In case of an opposite signal, a new position closing the previous one is opened (in other words, positions are opened and closed partially). Thus, the EA constantly follows the price.

The EA has been designed for working in the flat market. It features a critical drawdown, at which all positions are closed. In order to diversify the funds efficiently, it is recommended using the multicurrency operation mode, at which 10 currencies are selected, while the risk is reduced 10 times and the critical section is also reduced 10 times. Approximate open prices can be used for optimization (sample settings can be found in the Comments).

The EA correctly processes errors and works reliably with the balance of $1 000 or more. The Expert Advisor uses the basic concepts: breakeven, trailing stop, stop loss and take profit. Better test with the broker who provide five-digit quotes, and even better on the MetaQuotes-Demo server.

\r\n

Parameters

SetName – setting name (any);
OrderComment – order comment;
Magic – magic number;
ProhibitNewSeries – if you need to close the current position and stop opening new ones, enable this option;
LotRounding – lot rounding (to a required number of decimal places);
TypeRisk – risk calculation equation;
Risk – risk for automatic lot calculation;
PeriodSignal – indicator period;
Stoploss – stop loss;
Takeprofit – take profit;
TrailingStart – start of trailing stop;
TrailingStop – number of points to trail the stop level;
step – Parabolic parameter;
maximum – Parabolic parameter;
WorkCloseReversLong – allow closing a long position;
WorkCloseReversShort – allow closing a short position;
CriticalDrawdownLong – critical long position drawdown;
CriticalDrawdownShort – critical short position drawdown.

", "url": "https://www.mql5.com/fr/market/product/34420", "small_icon": "https://c.mql5.com/31/294/constrictors-logo-60x60-1727.png", "middle_icon": "https://c.mql5.com/31/439/constrictors-logo-140x140-2232.png", "icon": "https://c.mql5.com/31/294/constrictors-logo-200x200-8196.png", "rating": 0, "price": 127, "published": 1546438021, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34415, "title": "BotSAR", "description": "

RoboSar is a professional robot based on the Parabolic SAR indicator. The Expert Advisor is designed for the analysis of trending markets. On the \"bull market\" the indicator is below the prices, on the \"bearish market\" it is above the price. If the price crosses the Parabolic SAR lines, the indicator reverses, and its further values are located on the other side of the price. In case of such an indicator reversal, the reference point is the previous period's high or low. The reversal of the indicator signals either the end of a trend (switch to correction or flat) or its reversal. The EA closes log positions when the price gets below the indicator line; it closes short positions when the price rises above the Parabolic SAR line. That is, it tracks the direction of Parabolic SAR and holds open only the positions that are in the same direction as the Parabolic SAR. If a long position is open (i.e. the price is above Parabolic SAR), then the indicator line will mode up irrespective of the price movement. The amount of movement of the Parabolic SAR line depends on the value of the price movement. The EA correctly processes errors, and works reliably in the market. It can work with the deposit as small as $100! It is important to choose the direction of the EA operation: both sides, only buy or only sell. The signal can also be inverted. The Expert Advisor uses the basic concepts, breakeven, trailing, stop loss and take profit, as well as closing by an opposite signal. An important function is the correct calculation of risk. In this case Risk works as follows: 1 means risking 1% of deposit.

Overview of parameters:

OnOptimizationSharp – is used for optimization in the \"Custom max\" method for an additional accounting of Sharp ratio.
Magic - the magic number, an arbitrary integer.
PeriodWork – the period, on which the EA operates;
Risk - risk to enter the market, set as a percentage of loss of the total deposit, lot is calculated relative to the stop loss and acceptable loss in case stop loss triggers.
LotRounding - lot rounding (to a required number of decimal places).
Deviation - requotes.
Sleeps - waiting for position opening, closing or modification.
Withdraw - virtual money withdrawal in the tester, as a percentage of the initial deposit.
ShowIndicators – show the indicator on the chart.
PeriodTrailing – the period trailing works at.
TrailingStop – trailing level, 0 – disabled; trailing in points, active period based trailing.
PeriodTrailingStep – period based trailing.
ProhibitNewSeries – if you need to close the current position and stop opening new ones, enable this option (maintaining position before closing the EA).
WorkOpenLong - allow to open a long position.
WorkOpenShort - allow to open a short position.
WorkCloseLong - allow to close a long position.
WorkCloseShort - allow to close a short position.

Optimization Instructions:

Better optimize it using the Custom max mode with the progressive optimization function that can increase the potential forecast. To increase optimization speed, set only open prices and the period equal to PeriodWork. In the default parameters, operation in the specified side and closure by a signal are enabled. Trailing does not use points, but the last bar of the specified time interval (PeriodTrailingStep), (TrailingStop=0). Set the default settings, configure the following fields for optimization:

StopLoss	50	10	200	Stop Loss
TakeProfit	100	10	300	Take Profit
TrailingBreakeven	20	10	50	Breakeven level, 0 – disabled
TrailingStart	100	10	300	Trailing start level, 0 – disabled
PeriodSignal	M15		H4	The period of the indicator
SignalBar	1		5	A signal bar
Maximum	0.02	0.02	2	Parabolic maximum
Step	0.002	0.002	0.2	Parabolic step
Inversion	true		false	Entry signal inversion

", "url": "https://www.mql5.com/fr/market/product/34415", "small_icon": "https://c.mql5.com/31/294/botsar-logo-60x60-1612.png", "middle_icon": "https://c.mql5.com/31/440/botsar-logo-140x140-1961.png", "icon": "https://c.mql5.com/31/294/botsar-logo-200x200-8875.png", "rating": 0, "price": 127, "published": 1546420966, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 34404, "title": "TradeKeeper Lite MT5", "description": "

The utility TradeKeeper Lite can show your profits for different periods and bip a sound when you reach a profit target value. \r\nClick the tachometer to quickly switch to the next profit period. There are 5 of them: This Day, This Week, This Month, Last 90 Days and All I \r\nMade.

\r\n\r\n\r\n

\r\n With the utility TradeKeeper Pro, available at this \r\n link, you can also open trades with a magic number and volume of your choice, trail any orders with a simple trail or iSAR-based trail, \r\n as well as close any open trades and pending orders using different techniques.
\r\n

\r\n

Click the minus/plus button in the corner to collapse or expand all data.

\r\n

The profit calculation takes into account swaps and commissions.

\r\n

\r\n\r\n\r\n

Properties of the TradeKeeper Lite:

\r\n\r\n

Color preset - you can choose among 2 for now.

\r\n

Fontsize - helps fit the text to your screen resolution.

\r\n

Corner - choose where to place your data: Left upper chart corner, Left lower chart corner, Right lower chart corner or Right upper \r\nchart corner.

\r\n

Magic - your magic number to keep account of. It is handy if you have several strategies and you want to see the stats for only one of \r\nthem.

\r\n

Profit period - how your tachometer calculates profits by default: This Day, This Week, This Month, Last 90 Days or All I Made.

\r\n

Profit max - it is used for creating your tachometer. It should be positive.

\r\n

Profit min - it is used for creating your tachometer. It should be negative.

\r\n

Profit target - you indicate this in your deposit currency. The TradeKeeper Lite calculates the current \r\nprofit value as a difference of Equity and Balance. When the target you set is reached, the TradeKeeper Lite notifies you \r\nwith a sound.

\r\n

", "url": "https://www.mql5.com/fr/market/product/34404", "small_icon": "https://c.mql5.com/31/298/tradekeeper-lite-mt5-logo-60x60-8906.png", "middle_icon": "https://c.mql5.com/31/445/tradekeeper-lite-mt5-logo-140x140-8308.png", "icon": "https://c.mql5.com/31/298/tradekeeper-lite-mt5-logo-200x200-9979.png", "rating": 0, "price": 0, "published": 1546415270, "popularity": 0.1186004207702012, "category": "Utility", "votes": 0 }, { "id": 34406, "title": "Outside Days Candlestick Bulkowski", "description": "

Outside Days Candlestick Bulkowski

\r\n

The Outside days candlestick is a well-known candle pattern composed of two candles.

This indicator for showing outside days candlestick that describe by Thomas Bulkowski.

\r\n

If you need for MetaTrader 4 version, please visit here:

\r\n

https://www.mql5.com/en/market/product/34411

\r\n

Feature Highlights

Show outside days candlestick.
Customizable \"Symbol\".
Customizable symbol distance from candlestick.

Input Parameters

Symbol - Input symbol code from \"wingdings\" for outside days candlestick (default is dot).
SymbolShift - Input symbol distance from candlestick.
SymbolColor - Input color for symbol (outside days).

Outside Days Candlestick definition by Thomas Bulkowski:

\r\n

Outside days are a two-bar pattern.
Look for a higher high and lower low on the second day.
The price bar fits outside the prior day's range.
The first bar cannot have the high price equal to the low price or four price doji (open = high = low = close price).

\r\n

", "url": "https://www.mql5.com/fr/market/product/34406", "small_icon": "https://c.mql5.com/31/294/outside-days-candlestick-bulkowski-logo-60x60-9615.png", "middle_icon": "https://c.mql5.com/31/440/outside-days-candlestick-bulkowski-logo-140x140-8750.png", "icon": "https://c.mql5.com/31/294/outside-days-candlestick-bulkowski-logo-200x200-4299.png", "rating": 0, "price": 30, "published": 1546408721, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34390, "title": "My Big Bars MT5", "description": "

The indicator My Big Bars can show bars (candles) of a higher timeframe. If you open an H1 (1 hour) chart, the indicator puts underneath a chart of H3, H4, H6 and so on.

The following higher timeframes can be applied: M3, M5, M10, M15, M30, H1, H3, H4, H6, H8, H12, D1, W1 and MN.

The indicator chooses only those higher timeframes which are multiple of the current timeframe. If you open an M2 chart (2 minutes), the higher timeframes exclude M3, M5 and M15.

There are 2 handy buttons in the lower right corner. The right button always shows the current higher timeframe. Click it to switch to the next higher timeframe. The left button appears if there is a higher timeframe which is less than the current. This way you can easily switch among the higher timeframes.

A higher timeframe may be delayed when you click the button and there is no available history for the moment.

2 properties of the indicator allow to set the colors for the growing bar and the falling bar.

", "url": "https://www.mql5.com/fr/market/product/34390", "small_icon": "https://c.mql5.com/31/294/my-big-bars-mt5-logo-60x60-2662.png", "middle_icon": "https://c.mql5.com/31/441/my-big-bars-mt5-logo-140x140-3059.png", "icon": "https://c.mql5.com/31/294/my-big-bars-mt5-logo-200x200-9464.png", "rating": 4.583333492279053, "price": 0, "published": 1546360436, "popularity": 0.4638869719715955, "category": "Indicator", "votes": 12 }, { "id": 34270, "title": "Pivot MT5", "description": "

The indicator draws daily support and resistance lines on the chart, as well as the Pivot level (reversal level).

Adapted to work in MT5

The standard timeframe for calculating support and resistance levels is D1.

You can choose other timeframes according to your strategy (for example, for M1-M15, the optimal timeframe for calculations is H1)

The function for calculating support and resistance levels has been updated; in this calculation option, fibonacci levels are taken into account, respectively, for each of the timeframes.

Indicator parameters:

Period_TF - timeframe for calculating support and resistance levels

", "url": "https://www.mql5.com/fr/market/product/34270", "small_icon": "https://c.mql5.com/31/293/pivot-mt5-logo-60x60-5443.png", "middle_icon": "https://c.mql5.com/31/441/pivot-mt5-logo-140x140-9436.png", "icon": "https://c.mql5.com/31/293/pivot-mt5-logo-200x200-2338.png", "rating": 0, "price": 0, "published": 1546025203, "popularity": 0.6594216623001604, "category": "Indicator", "votes": 0 }, { "id": 34257, "title": "Quick Copier MT5", "description": "

\"Quick Copier\" is designed to copy trading without any complicated settings. It copies master orders faster than \"Just Copier\" (https://www.mql5.com/en/market/product/20920).

\r\n

Please also check this product at fxina.hostingerapp.com.

\r\n

The copy can be done in one PC.

One EA can be set as master (provider) or slave (receiver). The receiver lot can be set to multiple providers lots.

Any type of copy is available.

MT4 -> MT5

MT4 -> MT4

MT5 -> MT5

MT5 -> MT4

If you want to copy MT4 -> MT5 or MT5 -> MT4, please purchase \"Quick Copier MT4\" and \"Quick Copier MT5\" separately.

\r\n

(https://www.mql5.com/en/market/product/34184)

\r\n

Quick Copier can copies Pending Orders, Stoploss and Takeprofit.

In one terminal, \"Quick Copier\" can be functioning as a Master and at the same time also as a Slave. So that Quick Copier can be used as a tool to copy trading as a Slave and then immediately send trading signals as a Master.

Slave mode can copy several Masters.

Button on Master / Slave: shows Running / Stop

Special features:

Prefix: mark at the beginning of the symbol

Suffix: sign at the end of the symbol

\r\n

Copy mode:

ByTicket: Copy trading based on each Order Ticket on the Master (for using on hedging account)

BySymbol: Copy trading based on Order Symbols that OP on the Master (for using on hedging account and netting account)

\r\n

Copy Buy: true / false

Copy Sell: true / false

Copy Stop Loss: true / false

Copy Take Profit: true / false

Copy Pending Orders: true / false

Reverse Trading: to copy trading in opposite directions, including pending orders (Buy <> Sell, BuyLimit <> SellStop, BuyStop <> SellLimit)

Lot Multiply - copy of trades with the lot size increased by the specified multiplier.

Timer (in seconds) - event generation period of the timer for the copier operation. The greater the period, the less the load on the terminal.

\r\n

", "url": "https://www.mql5.com/fr/market/product/34257", "small_icon": "https://c.mql5.com/31/293/quick-copier-mt5-logo-60x60-7410.png", "middle_icon": "https://c.mql5.com/31/440/quick-copier-mt5-logo-140x140-6624.png", "icon": "https://c.mql5.com/31/293/quick-copier-mt5-logo-200x200-9026.png", "rating": 0, "price": 60, "published": 1545996274, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 33508, "title": "GOLD Scalper PRO MT5", "description": "

ULTIMATE SALE!
Get GOLD Scalper PRO with a huge –60% discount!

Special Ultimate Sale Price: $177
(Regular Price: $447 — You Save $270! Don't Miss!)

Live results: https://www.mql5.com/en/signals/2353871

GOLD Scalper Pro is a very effective and profitable trading strategy, professionally developed especially for trading GOLD (XAUUSD).

I have used the most proven trading principle since the market exist – namely a position entry in the direction of a distinctive market impulse and a following correction. This principle has been proven rock solid since the markets exist and it has been widely exploited by the “Smart Money” traders. I know this, because I am using this trading pattern more than 15 years in a different way in many trading systems and it just does not fail.

GOLD Scalper Pro is not just another curve fitted system with a hundred parameters. On the contrary - the trading logic is so strong and reliable, so it needs a few parameters to be profitable.

GOLD Scalper Pro is not a grid, martingale, or other risky strategy – it is a classical trading strategy by a textbook, which uses reasonable Stop Loss levels and an effective entry and exit trading logic.

There is a MT4 version too! Check on my profile!

Here are the key features, which make GOLD Scalper Pro a very good trading system:

2 trading systems in 1 EA
Strong, pure and simple trading logic
Highly effective exit algorithm
24/5 trading, without any time restrictions – no GMT shift hassles
Reasonable TP and SL levels - plus optional ATR based algorithm
Low drawdown
Solid backtest performance

As well GOLD Scalper Pro, is equipped with many PRO features like:

Advanced News Filter
Stealth mode
Advanced Time Management System
Email and Push Notification system
Friday Exit System
Drawdown Protection System

Instructions and recommendations:

Please, test the GOLD Scalper Pro on a demo account first in order to get familiar with all features and settings! Especially the lot size could differ between the brokers (normally it is 100 ounces per lot), so it is very important to make sure that the AutoMM function calculates the right lot size, which should be approximately 0.1 lot (10 ounces) at $10k account size and AutoMM=1. Respectively 0.01 lots with AutoMM=1 for account size $1000. For reference only, AutoMM=5 should open 0.05 lots on $1000 account balance.
Make sure that the spread of your broker in normal conditions does not exceed 400 pips (4 cents) in XAUUSD (GOLD/USD)! You can use Auto MM=2% (low risk) up to 10% (high risk), according to the significance of your account and your risk and profit expectations.Reasonable fixed Lot size is 0.05 on 1k account balance, or 0.5 lots on 10К account balance.

You can run the EA on M1 or M15 chart – it makes no difference for the EA, as all used time-frames are hard-coded.

You can backtest and optimize the EA on M1 chart by “open price only” method – this will be correct enough and you will save a lot of time..

Finally, please, bear in mind that Holy Grail in trading does not exist! Even the best system suffers some bad periods. GOLD Scalper PRO is using very reasonable SL levels, so they can get hit /even repeatedly/ in bad market condition. Please, do not leave negative comments after every SL hit, or losing trade!

GOLD Scalper PRO Settings

WinLargeFonts: true/false - use \"true\" to adjust the robot information box display in case you are using the Windows Large Fonts.
UseSystem1: true/false - enables/disables the trading of System1
UseSystem2: true/false - enables/disables the trading of System2
LongTrades - true/false - enable/disable long trades
ShortTrades - true/false - enable/disable short trades
EA_Comment - text which will be added as a comment to each trade opened by GOLD Scalper PRO.
MaxSpread - maximal allowed spread for position opening.
Slippage - maximal allowed slippage for position opening.
StealthMode - true/false - conceal stop loss and take profit levels in program logic making them invisible to brokers. If you use this mode, the stop loss and take profit orders are not located in the trading server.
CloseOnlyOnProfit - true/false - when this mode is enabled, positions will be closed only on profit or where stop loss is reached. When CloseOnlyOnProfit=false /default/, positions will be closed according to the system logic.
.....

For more info and COMPLETE LIST OF SETTINGS and LIVE Results, visit the blog! Click here!

If you like my product, please write a review! I will be very grateful!

You can check out my other products in my profile!

If you want to be notified of my new products, please add me as a friend! I regularly publish new forex robots!

", "url": "https://www.mql5.com/fr/market/product/33508", "small_icon": "https://c.mql5.com/31/1947/gold-scalper-pro-mt5-logo-60x60-2332.png", "middle_icon": "https://c.mql5.com/31/1947/gold-scalper-pro-mt5-logo-140x140-1806.png", "icon": "https://c.mql5.com/31/1947/gold-scalper-pro-mt5-logo-200x200-8010.png", "rating": 4.599999904632568, "price": 177, "published": 1545924040, "popularity": 881.3019742476505, "category": "Expert", "votes": 35 }, { "id": 34114, "title": "DigiGrid MT5", "description": "

The Expert Advisor builds a grid of orders at prices near support or resistance levels. Entry points are calculated by the EA using the author's algorithm and based on a variety of factors. The EA uses several time ranges for analysis. The built-in trend filter allows to make more accurate entries with a greater likelihood of closing them with profit and thus reducing the number of simultaneously open orders. All orders are closed upon reaching the expected profit. Through the use of TakeProfit parameter and applying it to all orders, the speed requirements for the Internet and the broker are reduced. And most importantly, if the connection with the broker is lost, during the release of strong news, and this sometimes happens, the orders will be automatically closed upon reaching the expected price.

The EA has a spread filter that does not allow opening trades at an unprofitable price.

Additionally, it is possible to limit the work time of the adviser. To do this, it is enough in the settings to specify the allowed time range for trading. This allows you to open the orders only, for example at night, when the market is less volatile.

The default settings are optimized for the EURUSD pair.

\r\n

Additional ready-made settings for pairs: EURGBP, USDCAD, NZDUSD, USDJPY are available in the comments section.

The algorithm of the EA allows it to work on almost any pair, after preliminary optimization of its settings. For faster optimization, as well as for easier adjustment of the adviser, the number of its parameters is minimized.

Depending on your preferences, the expert advisor can use fixed lot size for trade or dynamically calculated based on free margin.

The number of characters in quotes is determined automatically;
The timeframe of the chart does not matter. This parameter is defined in the settings;
The leverage is 1:500 or bigger;
Run only one pair at one account;
Account must support hedging mode.

The minimum recommended deposit is about 2000 USD on standard accounts.

With smaller amounts of deposit, you need to use cent accounts or micro accounts.

Parameters:

Risk - the risk value. Used to calculate the dynamic lot size of the order;
Fixed Lot Size - fixed lot size. If set to 0, the EA will use dynamic lot size;
Lot Step - increment step of the lot for each subsequent order in the basket;

Spread Control - enable/disable spread filter;
Maximum Spread - maximum allowable spread;
Maximum Orders - maximum number of open orders;

Time applies to - the time parameter can be applied only to the first order or to all orders;
Open Time - allowed time to start trading. Used broker time;
Close Time - time to finish trading. Used broker time;

TakeProfit for the first order - expected profit for the single order, in points;
TakeProfit for all orders - expected profit for all orders, in points;
Minimum distance - minimum distance between the orders, in points;
Indicator deviation - minimum permissible deviation values of the indicator;
Period - period of the indicator;

Work Timeframe - working timeframe;
Timeframe for trend detection - timeframe to determine the short-term trend;
Enable additional trend filter - enable/disable additional short-term trend filter for first order;

Slippage - maximum allowed price of slippage, in points;
Comment for expert advisor orders - comment for expert advisor's orders;
Magic number for orders - unique number for the expert advisor's orders (any number);

For any questions please send me a private message. I will be glad to help you.

", "url": "https://www.mql5.com/fr/market/product/34114", "small_icon": "https://c.mql5.com/31/292/digitalgrid-mt5-logo-60x60-7301.png", "middle_icon": "https://c.mql5.com/31/445/digigrid-mt5-logo-140x140-2436.png", "icon": "https://c.mql5.com/31/292/digitalgrid-mt5-logo-200x200-2374.png", "rating": 0, "price": 150, "published": 1545908001, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 33984, "title": "Reflection Candles Chart", "description": "

This tool is used to generate a K - line reflection chart of a currency pair for foreign exchange transactions.

For example, if the currency pair is EURUSD, a custom currency pair named EURUSD_ref is generated and a chart for that currency pair is opened.

The price of a custom pair of currency is the inverse of the price of the original pair, which is the equivalent of a new pair of currency, the USDEUR.

The usage is simple, put it on any chart, the new chart will open, and then draw the corresponding price K graph in real time.

However, you cannot load an application to run on a reflection diagram generated by an indicator.

", "url": "https://www.mql5.com/fr/market/product/33984", "small_icon": "https://c.mql5.com/31/290/reflection-candles-chart-logo-60x60-3868.png", "middle_icon": "https://c.mql5.com/31/438/reflection-candles-chart-logo-140x140-2455.png", "icon": "https://c.mql5.com/31/290/reflection-candles-chart-logo-200x200-6093.png", "rating": 0, "price": 30, "published": 1545819671, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 34125, "title": "BRiCK Convert4To5 MT5 Free", "description": "

* This product was converted using \"BRiCK Convert4To5 MT4\" based on the MQL4 source file of \"BRiCK Convert4To5 MT4 Free\".

\r\n

\"Convert4To5\" is a Script that converts MQL4 source files into MQL5 source files.
Experts, Indicators, Scripts, and Libraries with extension \".mq4\" will be available for MT5.

Parameter

None.

Procedure

1. Open the following folder.
terminal_data_folder\\MQL4\\Files\\ (in the terminal menu select to view \"File\" - \"Open the data directory\")

2. Confirm that the BRiCK_Convert4To5 folder exists.
If it does not exist, insert a script \"BRiCK_Convert4To5\" into an arbitrary chart and create a folder.

3. Place the source file whose extension is \".mq4\" in the Input folder under the BRiCK_Convert4To5 folder.

4. Insert the script \"BRiCK_Convert4To5\" in an arbitrary chart.

5. Open the Output folder under the BRiCK_Convert4To5 folder and check that the file with the extension \".mq5\" has been created.

6. Compile the created MQL5 source file with a MetaEditor.

7. Make sure that it compiles normally. Please correct yourself if an error occurs.

8. Test that it will be the expected movement.

Confirmation environment

[MT4]
Version: 4.00
Build: 1170
Server: Axiory Global Ltd.

[MT5]
Version: 5.00
Build: 1978
Server: MetaQuotes Software Corp.
Account: Hedge

Precautions

- The difference between the product version and the free version is as follows.

	BRiCK Convert4To5	BRiCK Convert4To5 Free
Price	10 USD	0 USD
Custom Indicator Functions	Available	Unavailable
Technical Indicator Functions	Available	Unavailable
Trade Functions	Available	Unavailable
Watermark	None	Exist
Sales of converted files	Allowed	Not allowed

- This product does not guarantee perfect conversion.

I have released it since testing the conversion, but it may not be able to convert properly depending on how you write the source code.

- You can not refund or return items. Please confirm with the free version in advance.

- Direct or indirect loss due to using the product is not guaranteed.

- It may not be converted as expected due to differences in terminal version or build.

Remarks

- Multiple files can not be converted at the same time. Place only one file in the Input folder.

- It is necessary to match the data type defined by the function with the data type of the argument when calling the function.

- Conversion of include files with the extension \".mqh\" is not supported. Paste the code into a file of \".mq4\" format and convert it.

- The conversion logic assumes the MQL4 source file created after build 940.

- Event functions init, deinit, start are deprecated. It is necessary to describe the main process to OnTick for experts, OnCalculate for indicators, OnStart scripts.
Refer to the reference for the transition from MQL4 to MQL5.

- Be sure to use \"#property strict\" before conversion of MQL4 source file to make sure there are no potential compile errors.

#property strict

void OnInit()
{
Print(\"Hello BRiCK\");
}

- The following functions can not be migrated because there is no corresponding function in MQL5.
Returns a constant value to prevent compile errors.

Function name	Return value
AccountFreeMarginMode	-1
FileOpenHistory	-1
HideTestIndicators	-
iBandsOnArray	-1
iCCIOnArray	-1
iEnvelopesOnArray	-1
iMAOnArray	-1
iMomentumOnArray	-1
IndicatorBuffers	false
IndicatorCounted	-1
iRSIOnArray	-1
iStdDevOnArray	-1
MQLSetInteger	-
OrderPrint	-
RefreshRates	false

- Since the following functions result in override errors, they are replaced and output.

Function name	Function name after replacement
FileReadDouble	FileReadDouble_MQL4
StringTrimLeft	StringTrimLeft_MQL4
StringTrimRight	StringTrimRight_MQL4
StringConcatenate	StringConcatenate_MQL4
iCustom	iCustom_MQL4
ArraySort	ArraySort_MQL4
OrdersTotal	OrdersTotal_MQL4

- Since it is not implemented with variable length arguments, the number of arguments is limited for the following functions.

Function name	Upper bound of variable length argument
StringConcatenate	9
iCustom (iCustom_MQL4)	9

- In MQL5, when the OrderSend function fails, I added \"GetLastError_Trade()\" because I do not know details with \"GetLastError ()\" alone.
Please refer here for the return value.

", "url": "https://www.mql5.com/fr/market/product/34125", "small_icon": "https://c.mql5.com/31/292/brick-convert4to5-mt5-free-logo-60x60-6960.png", "middle_icon": "https://c.mql5.com/31/446/brick-convert4to5-mt5-free-logo-140x140-7345.png", "icon": "https://c.mql5.com/31/292/brick-convert4to5-mt5-free-logo-200x200-3190.png", "rating": 5, "price": 0, "published": 1545800934, "popularity": 0.051735549507854146, "category": "Utility", "votes": 1 }, { "id": 34182, "title": "Crossover System", "url": "https://www.mql5.com/fr/market/product/34182", "small_icon": "https://c.mql5.com/31/292/crossover-system-logo-60x60-7882.png", "middle_icon": "https://c.mql5.com/31/440/crossover-system-logo-140x140-9253.png", "icon": "https://c.mql5.com/31/292/crossover-system-logo-200x200-5129.png", "rating": 0, "price": 30, "published": 1545765601, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34183, "title": "Engulfing Candlestick Bulkowski", "description": "

Engulfing Candlestick Bulkowski

The engulfing candlestick is a well-known candle pattern composed of two candles.

This indicator for showing engulfing candlestick that describe by Thomas Bulkowski.

\r\n

If you need for MetaTrader 4 version, please visit here:

\r\n

https://www.mql5.com/en/market/product/34193

\r\n

Feature Highlights

Show bullish engulfing and bearish engulfing.

Customizable \"Up Symbol\".
Customizable \"Down Symbol\".
Customizable symbol distance from candlestick.
Customizable \"Down Color\".
Customizable \"Up Color\".

\r\n\r\n

Input Parameters

UpSymbol - Input symbol code from \"wingdings\" for bullish engulfing (default is arrow up).
DownSymbol - Input symbol code from \"wingdings\" for bearish engulfing (default is arrow down).
SymbolShift - Input symbol distance from candlestick.
DownColor - Input color for down symbol (bearish engulfing).
UpColor - Input color for up symbol (bullish engulfing).

Engulfing Candlestick definition by Thomas Bulkowski:

Bullish Engulfing

The first is a bearish candle followed by a bullish candle.
The bullish candle should have a close above the prior open and an open below the prior close.
In other words, the body of the bullish candle should engulf or overlap the body of the bearish candle.
Ignore the shadows. Shadows are unimportant.

Bearish Engulfing

The first is a bullish candle followed by a bearish candle.
The bearish candle should have a close below the prior open and an open above the prior close.
In other words, the body of the bearish candle should engulf or overlap the body of the bullish candle.
Ignore the shadows. Shadows are unimportant.

", "url": "https://www.mql5.com/fr/market/product/34183", "small_icon": "https://c.mql5.com/31/292/engulfing-candlestick-bulkowski-logo-60x60-8142.png", "middle_icon": "https://c.mql5.com/31/440/engulfing-candlestick-bulkowski-logo-140x140-5796.png", "icon": "https://c.mql5.com/31/292/engulfing-candlestick-bulkowski-logo-200x200-9078.png", "rating": 0, "price": 30, "published": 1545750156, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34093, "title": "KT COG Advanced MT5", "description": "

KT COG is an advanced implementation of the center of gravity indicator presented by John F. Ehlers in the May 2002 edition of Technical Analysis of Stocks & Commodities magazine.

It's a leading indicator which can be used to identify the potential reversal points with the minimum lag. The COG oscillator catches the price swings quite effectively.

\r\n

MT4 version of the same indicator is available here KT COG Advanced MT4

Calculation of COG

The COG indicator is consist of the two lines. The main line is based on the following formula

COG Line: -Sum(Time Series[i] * (i + 1)) / Sum(Time Series[i])

Signal Line: A moving average plotted on the COG line.

A buy signal is generated when the COG line crosses above the signal line and a sell signal is generated when the COG line crosses below the signal line.

Please note that the COG is a leading indicator. For profitable trading, each crossover cannot be used as the buy/sell signal. There is a need for adaptive filtration before this oscillator can be used for practical trading.

Advanced Filtration

Our adaptive filtration algorithm combines the original COG formula with the major trend direction and market acceleration/deceleration. The end result of such combination is that we get a smooth leading indicator in which the crossover can be used as the buy/sell signals.

Features

Very good for the scalping on smaller time frames such as M1, M5 etc.
Catches reversal points earlier with the minimum lag.
Buy/Sell dots at each crossover for signal generation.
Performance analysis metrics such as Win/Loss, Success rate, Avg. Profit etc.
Can be combined and used as a filter with other indicators

Input Parameters

COG Period: The period used for the calculation of main COG line.
Smoothing Period: The period used for the calculation of signal line.
Smart Filtration: Set the smart filtration true or false for the crossover signals.
Performance Analysis: Set the performance analysis true or false.
Draw Signal Dots: You can turn on/off the dots drawn at each crossover. Don't worry, even if you choose to not draw the signal dots, you'll still receive the alert for each crossover.

", "url": "https://www.mql5.com/fr/market/product/34093", "small_icon": "https://c.mql5.com/31/291/kt-cog-advanced-mt5-logo-60x60-1951.png", "middle_icon": "https://c.mql5.com/31/438/kt-cog-advanced-mt5-logo-140x140-4540.png", "icon": "https://c.mql5.com/31/291/kt-cog-advanced-mt5-logo-200x200-1413.png", "rating": 0, "price": 30, "published": 1545423411, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34109, "title": "Simple Weis Wave", "description": "

\r\n One of the best tools for analyzing volume, \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n Weis Wave was idelized by David Weis, to facilitate the reading of directional flow. For the VSA method disciples it is an evolution of the \r\n practices created by Richard Wycoff, facilitating a predictive reading of the market, always seeking an accumulation and \r\n distribution of the negotiated contracts. \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n

Cumulative wave volume

\r\n

Range of wave ( removed)

\r\n

\r\n\r\n\r\n

\r\n Average Wave volume Ref \"Tim Ord lectures\" ( removed)\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

", "url": "https://www.mql5.com/fr/market/product/34109", "small_icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-60x60-4468.png", "middle_icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-140x140-2661.png", "icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-200x200-5150.png", "rating": 3.6666667461395264, "price": 0, "published": 1545419088, "popularity": 1.4471572174276017, "category": "Indicator", "votes": 3 }, { "id": 32912, "title": "KT Momentum Arrows MT5", "description": "

L’indicateur KT Momentum Arrows est basé sur une rupture momentanée, calculée à partir de l’écart des bandes et de la volatilité émergente dans une direction spécifique.

Un signal d’achat est généré lorsque le prix clôture au-dessus de la bande supérieure, et un signal de vente lorsque le prix clôture en dessous de la bande inférieure.

Un coefficient de magnitude est utilisé en paramètre d’entrée, influençant à la fois l’écart des bandes et la volatilité. Sa valeur doit être choisie avec soin selon l’instrument et l’unité de temps utilisés.

Fonctionnalités clés

Pas de repaint !
Un excellent outil d’entrée pour les traders en momentum.
Analyse des performances : taux de réussite, gain/perte moyen, rendement, etc.
Convient aux Day Traders, Swing Traders et Scalpeurs.

Paramètres d’entrée

Barres historiques : Nombre de barres utilisées pour le calcul de l’indicateur.
Coefficient de magnitude : Ajuste l’écart des bandes et la mesure de la volatilité.
Analyse de performance : Affiche/masque l’analyse, y compris les courbes de tendance des profits.
Paramètres d’alerte : Alertes pop-up, email, push et son disponibles.
Les autres paramètres sont explicites.

", "url": "https://www.mql5.com/fr/market/product/32912", "small_icon": "https://c.mql5.com/31/280/kt-momentum-arrows-mt5-logo-60x60-9265.png", "middle_icon": "https://c.mql5.com/31/441/kt-momentum-arrows-mt5-logo-140x140-7004.png", "icon": "https://c.mql5.com/31/280/kt-momentum-arrows-mt5-logo-200x200-7157.png", "rating": 5, "price": 75, "published": 1545339447, "popularity": 3.1233549045377322, "category": "Indicator", "votes": 2 }, { "id": 34071, "title": "Blahtech Moving Average MT5", "description": "

Blahtech Moving Average indicator is a multitimeframe version of the standard Moving Average indicator. It is also enhanced with customisable alerts, period breaks and other configuration options.

The 50 day and 200 day moving averages are widely followed by investors and traders, with breaks above and below the MA lines considered to be signals of interest.

Links [ Install | Update | Training | All Products ]

Feature Highlights

Up to three timeframes
Configurable calculation variables
Customisable alerts and messages
Optional period breaks

Input Parameters

Timeframe 1

Visible - Display Moving Average on the chart

Visible - Display Moving Average for the period for this timeframe
Timeframe - Choose the period for this timeframe
Averaging Period - Number of iterations to use for the calculation
Shift (calc timeframe) - Offset the calculations by a number of bars
Method - Averaging method to use

Simple
Exponential
Smoothed
Linear-Weighted

Apply To - Price to use

Close
Open
High
Low
Median
Typical
Weighted Close

Show Period Breaks - Display gap in line at the period breaks (higher timeframes only)
Alerts - Enable alerts for this timeframe

Timeframe 2

Same as Timeframe 1

Timeframe 3

Same as Timeframe 1

Other parameters

Alerts -Popup - Enable/disable sound and popup dialog for active alerts

Disabled
Sound Only
Popup and Sound

Alerts - Email - Enable/disable email for active alerts
Alerts - Notification - Enable/disable notifications for active alerts
Alerts - Signal Bar - Set the bar that is used to trigger the alerts
Alerts - Sound Wav File - Set the wav file to be used for alerts
Alerts - Message Text - Configure the popup and notification alert message text
Alerts - Email - Subject - Configure the email alert subject
Alerts - Email - Body - Configure the email alert body
Hot Keys Map - Allows the user to reassign the hot-keys

“C” Clears all Blahtech indicator graphics from the chart. Pressing “C” again brings them back
“R” Resets the indicator. (Backtest mode and any hot-key values are reset)

Hot Keys Reserved Keys - Define a list of keys that will stop clashes with hotkeys from other products
Shift (chart timeframe) - Offset all timeframes displayed on chart by a number of bars (current timeframe)
Show Buffers In Data Window - Show or Hide the iCustom Buffers in the Data window

Developers - iCustom buffers

Moving Average - Timeframe 1
Moving Average - Timeframe 2
Moving Average - Timeframe 3

", "url": "https://www.mql5.com/fr/market/product/34071", "small_icon": "https://c.mql5.com/31/291/blahtech-moving-average-mt5-logo-60x60-9520.png", "middle_icon": "https://c.mql5.com/31/438/blahtech-moving-average-mt5-logo-140x140-5213.png", "icon": "https://c.mql5.com/31/291/blahtech-moving-average-mt5-logo-200x200-7221.png", "rating": 5, "price": 0, "published": 1545290910, "popularity": 1.480378021209784, "category": "Indicator", "votes": 3 }, { "id": 34070, "title": "Blahtech Fisher Transform MT5", "description": "

Blahtech Fisher Transform indicator is an oscillator that displays overbought and oversold locations on the chart. The Fisher Transform algorithm transforms prices with any distribution shape into a normal distribution. The end result is a curve with sharp turning points that may help to identify bullish or bearish trends.

Fisher Transform values exceeding 1.66 on the daily chart are considered to be good areas for reversal trades.

Links [ Install | Update | Training | All Products ]

Feature Highlights

Configurable calculation variables
Customizable alerts and messages

Input Parameters

Periods - Number of candles back to use for the calculation
Apply To - Price to use

Close
Open
High
Low
Median
Typical
Weighted Close

Shift - Offset display on chart by a number of bars
Alert Level High - Set the high trigger level
Alert Level Low - Set the low trigger level
Alerts -Popup - Enable/disable sound and popup dialog for active alerts

Disabled
Sound Only
Popup and Sound

Alerts - Email - Enable/disable email for active alerts
Alerts - Notification - Enable/disable notifications for active alerts
Alerts - Sound Wav File - Set the wav file to be used for alerts
Alerts - Message Text - Configure the popup and notification alert message text
Alerts - Email - Subject - Configure the email alert subject
Alerts - Email - Body - Configure the email alert body
Show Data Buffers - Show the iCustom Buffers in the Data window

Developers - iCustom buffers

Fisher
Trigger

", "url": "https://www.mql5.com/fr/market/product/34070", "small_icon": "https://c.mql5.com/31/291/blahtech-fisher-transform-mt5-logo-60x60-6004.png", "middle_icon": "https://c.mql5.com/31/447/blahtech-fisher-transform-mt5-logo-140x140-1964.png", "icon": "https://c.mql5.com/31/291/blahtech-fisher-transform-mt5-logo-200x200-7217.png", "rating": 0, "price": 33, "published": 1545290881, "popularity": 0.4465544446092969, "category": "Indicator", "votes": 0 }, { "id": 34061, "title": "Hi Low Last Day", "description": "

The Hi Low Last Day (Hi Lo Last Day) indicator shows the high and low of the last trading day and the second trading day, as well as the minimum and maximum of last week .

There are many trading strategies on the daily levels. This indicator is indispensable when using such trading strategies.

In fact, everything is simple in trading, you just need to understand and accept it for yourself. There is only price!!! What is price? This is the level on the chart. The level is the price that the buyer and the seller are holding back. What price is capped by the counterparty? A price he won't sell or buy. Therefore, daily levels are very important. To help you understand the situation in the market, use the Hi Low Last Day indicator, which will help determine the mood of the market in the current day.

The Hi Low Last Day indicator has flexible settings:

Line color
Line width
Line style
how to display (the length of the lines)
Passed today ATR
The ATR period
To show the second day
The second day
Last Week's Setup

The indicator requires very little system resources and does not load the terminal.

", "url": "https://www.mql5.com/fr/market/product/34061", "small_icon": "https://c.mql5.com/31/292/hi-low-last-day-logo-60x60-9992.png", "middle_icon": "https://c.mql5.com/31/438/hi-low-last-day-logo-140x140-2043.png", "icon": "https://c.mql5.com/31/292/hi-low-last-day-logo-200x200-9013.png", "rating": 0, "price": 30, "published": 1545252666, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34059, "title": "Filled Area Chart MT5", "description": "

The utility Filled Area Chart adds to the standard set of price presentations. It is a brand new, nice price chart. You will \r\ncertainly like it if you want to feel yourself a trader born under the Bloomber lucky star.

\r\n

\r\n\r\n\r\n

The Properties allow to set the colors and other things:

\r\n\r\n

Color preset - choose a preset or set to \"Custom\" and set your own colors using the properties below.

\r\n

Custom area color - color of the area below the price line. Works only with Color preset = Custom.

\r\n

Custom chart color - color of the chart background. Works only with Color preset = Custom.

\r\n

Custom line color - color of the price line. Works only with Color preset = Custom.

\r\n

Custom text color - color of the text. Works only with Color preset = Custom.

\r\n

Number of scroll windows - this is the number of scrollable windows to be filled by the indicator. If you set more than 5, it may slow \r\ndown a resource-demanding computer.

\r\n

Update rate - set \"I_Like_It_Slow\" if you experience a slowdown on a resource-demanding computer. With this value, the \r\nindicator draws an area skipping the current bar (which changes constantly) and starting with the first bar.

\r\n

You can change other chart colors via the context menu of MetaTrader, which you can open by clicking the right mouse button in the chart.

If \r\nyour computer is somewhat slow, you may experience a short slowdown upon the first start of the indicator. It is because the indicator first \r\ndraws all of its objects. Subsequently, the indicator draws only the last 2-3 bars and the computer should work as usual.", "url": "https://www.mql5.com/fr/market/product/34059", "small_icon": "https://c.mql5.com/31/291/filled-area-chart-logo-60x60-9318.png", "middle_icon": "https://c.mql5.com/31/440/filled-area-chart-mt5-logo-140x140-2692.png", "icon": "https://c.mql5.com/31/291/filled-area-chart-logo-200x200-4129.png", "rating": 5, "price": 0, "published": 1545242912, "popularity": 0.06944229887599604, "category": "Utility", "votes": 1 }, { "id": 33445, "title": "SubWindow OnOff MT5", "description": "

The purpose of this utility is to manage one or more subwindow in the same chart by opening and closing them through a button or the keyboard keys

How it works: If you want to handle more than one subwindow you need to reinstall the indicator. In this case some setups has to be customized onlu in the last subwindow installed and others setups in the installed subwindow during the first time installation. They are denoted in the input rispectively as 'LW' and 'IW'.

First of all install the indicator in the installed subwindow and setup the 'IW options' if needed\". Then setup 'LW options' in the last subwindow installed\". The name of the indicator installed in the subwindow will be automatically inserted on the button. If it is too long, it is possible to edit the height of the text or the size of the button in the first installation. Note that the shortcut keys must be the same in all windows to work all together.

In the first subwindow there is a button to delete all the subwindows and their indicator and another one that on/off the all the buttons

Inputs

IW -- You can setup the height of the subwindows
IW -- It is possible to customize the button size, the labelsize
IW -- You can customize the shortcut key to on/off the subwindows
IW -- It possible to edit the subwindow button name with more than one indicator installed on it
LW -- It is possible to customize the button's color
LW -- You can choose the button group position

", "url": "https://www.mql5.com/fr/market/product/33445", "small_icon": "https://c.mql5.com/31/286/subwindow-onoff-mt5-logo-60x60-3144.png", "middle_icon": "https://c.mql5.com/31/441/subwindow-onoff-mt5-logo-140x140-4154.png", "icon": "https://c.mql5.com/31/286/subwindow-onoff-mt5-logo-200x200-7882.png", "rating": 0, "price": 45, "published": 1545236100, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 34029, "title": "Graphic rotator MT5", "description": "

This indicator helps you control several pairs in a small workspace, therefore, it is not necessary to open several charts on the platform to do so.
The indicator shows sequentially up to 6 different pairs, besides that each of these pairs has a button with which you can stop the indicator to observe the selected pair.
Place the indicator on a chart to monitor several pairs and the rest of your space use it on the chart of the pair you wish to observe in detail.

MT4 version

Parameters

Observation_time: Set the observation time in seconds.
Symbol_1: Place the symbol.
Symbol_2: Place the symbol.
Symbol_3: Place the symbol.
Symbol_4: Place the symbol.
Symbol_5: Place the symbol.
Symbol_6: Place the symbol.

", "url": "https://www.mql5.com/fr/market/product/34029", "small_icon": "https://c.mql5.com/31/291/graphic-rotator-mt5-logo-60x60-2300.png", "middle_icon": "https://c.mql5.com/31/440/graphic-rotator-mt5-logo-140x140-2547.png", "icon": "https://c.mql5.com/31/291/graphic-rotator-mt5-logo-200x200-9785.png", "rating": 0, "price": 30, "published": 1545175098, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 33971, "title": "TeaCii Auto Fibonacci MTF", "description": "

TeaCii Auto Fibonacci MTF is an implementation of Fibonacci Levels

\r\n

The indicator is simple and yet more powerful than those in the market

\r\n

IMPORTANT: UNIQUE SELLING POINTS

- The Levels are set automatically

- You can see ANY TIMEFRAME Levels in ANY Chart. E.g. Watch H1 on M1. Watch M1 on H1

- The Levels are available in Buffers for EA Use

- Helps you to get an edge early in by using multi timeframe

\r\n

Parameters

\r\n

TimeFrame : The timeframe of the indicator. It can be same, higher or lower than the charts timeframe. When using lower TF on higher TF chart, it is recommended to have a high lookback bars number.

\r\n

Lookback Bars : The only most important parameter. The highs and the lows will be based on this many bars.

\r\n

Line Length : This is purely cosmetic. It is the width of the line.

\r\n

Background Color : Again purely cosmetic. You may want to highlight the zone.

\r\n

", "url": "https://www.mql5.com/fr/market/product/33971", "small_icon": "https://c.mql5.com/31/290/teacii-auto-fibonacci-mtf-logo-60x60-5090.png", "middle_icon": "https://c.mql5.com/31/444/teacii-auto-fibonacci-mtf-logo-140x140-1950.png", "icon": "https://c.mql5.com/31/290/teacii-auto-fibonacci-mtf-logo-200x200-2087.png", "rating": 0, "price": 60, "published": 1545027920, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33964, "title": "SC MTF Obv for MT5 with alert", "description": "Indicateur On Balance Volume (OBV) avec support multi-timeframe, signaux visuels personnalisables et système d'alertes configurable.

Services de programmation freelance, mises à jour et autres produits TrueTL sont disponibles sur mon profil MQL5.

Les retours et avis sont très appréciés !

Qu'est-ce que l'OBV ?

L'indicateur On Balance Volume a été développé par Joe Granville et repose sur la théorie que le volume précède le prix. Le volume est ajouté les jours haussiers et soustrait les jours baissiers, créant un indicateur de volume cumulatif. Un OBV croissant avec des prix plats ou en baisse indique une accumulation haussière. Un OBV décroissant avec des prix stables ou en hausse signale une distribution baissière. Les divergences de l'OBV par rapport au prix peuvent être de forts indicateurs précoces de prochains changements de tendance.

Les signaux OBV se génèrent par des cassures de lignes de tendance dans l'indicateur OBV, des divergences entre l'OBV et le prix et des croisements de niveaux moyens de l'OBV. L'indicateur est particulièrement utile pour confirmer la force de la tendance et détecter des signaux précoces de mouvements de prix.

Fonctionnalités :

Marqueurs de signaux visuels avec flèches et lignes verticales
Trois tampons de signal indépendants avec déclencheurs configurables
Options de détection de signaux : changement de direction, croisement de niveau, pics/creux
Alertes configurables par signal (e-mail, push, son, popup)
Multi-timeframe (MTF) avec méthodes d'interpolation
Mode d'affichage en barres ou en lignes
Plusieurs modes de couleur (simple, basé sur la direction, basé sur le niveau)
Accès aux tampons via iCustom pour l'intégration avec les Expert Advisors (EA)

Paramètres d'Entrée :

Paramètres de Base :
- Prix appliqué : Détermine si une bougie est haussière ou baissière (défaut : clôture).
- Décalage de barre : Décale le tracé de la ligne du nombre de barres spécifié.
- Timeframe : Sélectionne le timeframe pour l'affichage MTF.
- MTF uniquement sur timeframe supérieur : Limite le MTF aux timeframes supérieurs au graphique actuel.
- Mode d'interpolation MTF : Sélectionne la méthode de lissage (Désactivé, Linéaire, Lissé, Pondéré, SMA).
- Nombre maximum de barres calculées : Limite les barres calculées pour des performances optimales.
Paramètres de Niveaux :
- Afficher le niveau : Active/désactive la ligne de niveau.
- Valeur du niveau : Seuil de niveau ajustable (défaut : 0).
- Apparence des niveaux : Personnalise la couleur, le style et l'épaisseur.
Paramètres de Signal :
- Déclencheur signal 1/2/3 : Configure le type de détection (changement de direction, croisement de niveau, pics/creux).
- Marqueurs visuels : Active les flèches et lignes verticales avec taille et position personnalisables.
- Personnalisation des flèches : Définit les codes Wingdings et les couleurs pour les signaux haussiers/baissiers.
Paramètres d'Alertes :
- Moment d'alerte : Choisit quand l'alerte se déclenche (Désactivé, À la clôture, Avant la clôture, Les deux).
- Limite d'intervalle d'alerte : Définit les minutes minimales entre les alertes répétées.
- Filtre horaire : Limite les alertes à des heures de trading spécifiques.
- Types de notification : Active les notifications par e-mail, push, popup et son.
Paramètres de Couleur et Style :
- Mode couleur : Choisit parmi plusieurs modes (Simple, Basé sur la direction, Basé sur le niveau).
- Mode histogramme : Bascule entre l'affichage en ligne et en histogramme.
- Apparence de la ligne : Personnalise les couleurs (4 par ligne), le style et l'épaisseur.

", "url": "https://www.mql5.com/fr/market/product/33964", "small_icon": "https://c.mql5.com/31/290/sc-mtf-obv-for-mt5-with-alert-logo-60x60-6563.png", "middle_icon": "https://c.mql5.com/31/446/sc-mtf-obv-for-mt5-with-alert-logo-140x140-1534.png", "icon": "https://c.mql5.com/31/290/sc-mtf-obv-for-mt5-with-alert-logo-200x200-6349.png", "rating": 5, "price": 0, "published": 1544999224, "popularity": 1.581979051248993, "category": "Indicator", "votes": 2 }, { "id": 33893, "title": "Market Sentiment for MT5", "description": "

Market Sentiment is an indicator for MT5.

Market sentiment is the feeling or tone of a market. Also called investor sentiment, it is generally described as being bullish or bearish :

When bulls are in control, prices are going up.
When bears are in control, prices are going down.

Markets being driven by emotions, the market sentiment is about feelings whereas fundamental value is about business performance.

Settings :

Range in bars : numbers of bars used for the calculation, at your own convenience, default is 100
Price averaging's period : period for averaging prices, at your own convenience, default is 13
Show signals : will show an arrow for buy & sell opportunities, at your own convenience, default is true

Buffers :

0 : Bulls in % (always positive, ie. 75.5%)
1 : Bears in % (always negative, ie. -24.5%)
2 : Long entry, non-null is a signal (always -90)
3 : Short entry, non-null is a signal (always 90)

NB 1 : Bulls + MathAbs(Bears) = 100%

NB 2 : -90 & 90 has been chosen arbitrarily in a graphical purpose.

", "url": "https://www.mql5.com/fr/market/product/33893", "small_icon": "https://c.mql5.com/31/290/market-sentiment-for-mt5-logo-60x60-9350.png", "middle_icon": "https://c.mql5.com/31/445/market-sentiment-for-mt5-logo-140x140-2134.png", "icon": "https://c.mql5.com/31/290/market-sentiment-for-mt5-logo-200x200-2204.png", "rating": 0, "price": 30, "published": 1544740610, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 26680 }

There are 2 strategies:

The Advisor Properties:

Comments to the buttons in the chart:

Recommendations

The Advisor Properties

Notes for the buttons in the chart

Properties of the Advisor

Notes for buttons in the chart

MA Crossover Master

Recommendation

ReverseTrend MT5

Account Requirements:

2025 Update!!!

Other products

Input parameters

Main settings:

Parameters

Technical details

Main features

Main parameters

The metaphorical \"wind's ballet\"

Main Features

Inputs

How to properly use WindFlow?

Main Features:

Inputs:

Features

Trading Strategies

Input Parameters

Caractéristiques principales

Autres caractéristiques:

Principle of operation

Parameters

Lite Hamster Scalping

(Very Fast EA no Graphics)

Recommendations :

Inputs descriptions :

Hamster Pro

(Very Fast, Easy Setup, More Power!)

Recommendations :

Inputs descriptions :

Parameter

Procedure

Confirmation

How to use this indicator

Indicator Properties

Comments to buttons in the chart

Strategy Description

Trailing Stop Loss Function

Magic Number Feature

Use of Gap Trader (Video)

Unlock Your Serious Edge

The Reliable Expert Advisor Version

Benefits You Get

How To Trade

Automatic Statistics Calculation

Parameters

User Manual

\r\n Watch my other products:\r\n https://www.mql5.com/en/users/sevenfourseven/seller

Parameters

How to use this indicator

Indicator Properties

Fonctionnalités

Paramètres d'entrée

Properties of the TradeKeeper Pro:

Comments to the buttons in the chart:

Modes

Utilisation :

Paramètres d'entrée

Features

Input Parameters

Optimization Instructions:

Properties of the TradeKeeper Lite:

Here are the key features, which make GOLD Scalper Pro a very good trading system:

As well GOLD Scalper Pro, is equipped with many PRO features like:

Instructions and recommendations:

GOLD Scalper PRO Settings

Parameters:

Parameter

Procedure

\r\n
Watch my other products:
\r\n
https://www.mql5.com/en/users/sevenfourseven/seller

Marché des robots de trading, des indicateurs et des applications de trading

Prix

NewsCatcher Free MT5

NewsCatcher Visual MT5

NewsCatcher Pro for MT5

Swiss HolyGrail

MACrossOver Master

TradePanel MT5

Swiss VWAPsimple

ReverseTrend

Trading King Extended MT5

Swiss InsideOutsideBar

Intersection EA

Take Your Profit

ZhiBiA

VWAP Simple

Time Scale for MT5

WindExpansion MT5

WindFlow HTF MT5

WindFlow MT5

KT Ichimoku Trader MT5

SBA scalping v75

Ind5 InfoPad Information Panel

GS grid5

HVK Mouse Buy Sell

VWAP with Standarddeviation

Lite Hamster scalping MT5

Hamster PRO MT5

BRiCK TradeByArrow MT5 Free

High Trend Lite MT5

HelloTraderDemo

GapTrader

Fx Karakurt

Inside Days Candlestick Bulkowski

DYJ MacdSto EA

Forex Abrams

Forex Ilan Barbudos

PipFinite Breakout EDGE MT5

EA Black Scorpion MT5

Bezdrev HFT expert advisor

CyberTrend MT5

HelloTrader

High Trend MT5

KT Psar Arrows MT5

DYJ Bands EA MT5

Just Copier Pro MT5

TradeKeeper Pro MT5

KT Auto Fibo MT5

KT Pin Bar MT5

Constrictors

BotSAR

TradeKeeper Lite MT5

Outside Days Candlestick Bulkowski

My Big Bars MT5

Pivot MT5

Quick Copier MT5

GOLD Scalper PRO MT5

DigiGrid MT5

Reflection Candles Chart

BRiCK Convert4To5 MT5 Free

Crossover System

Engulfing Candlestick Bulkowski

KT COG Advanced MT5

Simple Weis Wave

KT Momentum Arrows MT5

Blahtech Moving Average MT5

Blahtech Fisher Transform MT5

Hi Low Last Day

Filled Area Chart MT5

SubWindow OnOff MT5

Graphic rotator MT5

TeaCii Auto Fibonacci MTF

SC MTF Obv for MT5 with alert

Market Sentiment for MT5