{ "from": 8784, "count": 72, "list": [ { "id": 24323, "title": "Quick Panel Pro Hedging", "description": "

orologio. Questo consiglio riguarda solo la copertura dell'account. Versione Meta Trader 4 Quick Panel Pro

caratteristiche

I calcoli batch sono rapidi e semplici. Quando si sposta la linea di arresto, i calcoli vengono eseguiti immediatamente.
La maggior parte delle transazioni commerciali può essere completata rapidamente semplicemente facendo clic su questo pannello.
Puoi passare rapidamente da un pannello all'altro semplicemente facendo clic sui pulsanti verdi.
Modifica lo stop loss e prendi i profitti con un solo clic del mouse (nessun backtesting)
Mostra il prezzo medio in una casella con sfondo giallo e traccia una linea per il prezzo medio. clicca qui

Pannello di controllo

Il dashboard è composto da due colonne. La colonna di sinistra è per la vendita e quella di destra per l'acquisto.

Vendite: aprire un ordine di vendita.
Primo: chiudi il tuo primo ordine di vendita. Il primo riguarda gli orari di apertura.
Infine: chiudere l'ultimo ordine di vendita. L’ultima cosa da considerare è l’orario d’ufficio.
all+: ordine di vendita per chiudere una posizione redditizia.
all-: termina un ordine di vendita in perdita.
max+: completa l'ordine di vendita con il massimo profitto.
max-: chiude l'ordine di vendita con una perdita massima.
min+: chiude l'ordine di vendita con il profitto minimo.
min-: chiude l'ordine di vendita con una perdita minima.
Tutto: chiude tutti gli ordini di vendita.

Acquisto: apri un ordine.
Primo: completa il tuo primo ordine. Il primo riguarda gli orari di apertura.
Ultimo: completa il tuo ordine finale. L’ultima cosa da considerare è l’orario d’ufficio.
all+: chiudi l'ordine di acquisto in modo redditizio.
all-: un ordine di acquisto per liquidare una posizione in perdita.
max+: completa l'ordine con il massimo profitto.
max-: chiude l'ordine con la massima perdita.
min+: completa l'ordine con un profitto minimo.
min-: chiude l'ordine con una perdita minima.
Tutto: tutti gli ordini sono chiusi.

cogliere

Numero magico: il numero magico per gli ordini avviati da questo EA.
Quantità massima dell'ordine: questa è la quantità massima dell'ordine. A 0 non c'è limite.
Quantità massima ordine di vendita: quantità massima dell'ordine di vendita. A 0 non c'è limite.
Rapporto rischio-rendimento 1: questo è il rapporto iniziale tra Take Profit e Stop Loss. Se il valore è impostato su 0, l'EA non emetterà comandi.
Indice rischio-rendimento 2 – Un secondo indice per Take Profit e Stop Loss. Se il valore è impostato su 0, l'EA non emetterà comandi.
Indice rischio-rendimento 3: il terzo indice per Take Profit e Stop Loss. Se il valore è impostato su 0, l'EA non emetterà comandi.
Modalità batch: input con tre opzioni. Le opzioni sono Fix_Lots, Risk_Money o Risk_Percentage.
Dimensione lotto fissa: se selezioni \"Fixed_Lots\" come LotsMode, EA utilizzerà una dimensione di lotto fissa per il trading.
Capitale di rischio: se selezioni Risk_Money come LotsMode, EA calcolerà la dimensione del lotto in base al valore del capitale di rischio. RiskMoney è l'importo di denaro che puoi perdere dal tuo ordine.
Percentuale di rischio: se selezioni Risk_Percent come LotsMode, EA calcola la dimensione del lotto come percentuale del margine disponibile.

Imposta il punto di pareggio: BreakevenLevelPips>0 e BreakevenPlusPips >=0. Altrimenti il punto di pareggio non funzionerà.

Punto di pareggio (punti): il profitto (punti) al quale viene attivata la funzione di pareggio.
Breakeven Plus: il punto di pareggio più questa voce corrisponde alla perdita di pareggio.

Imposta il trail stop loss: TrailStopLevelPips>0 e TrailStopPips>0; Altrimenti, lo stop loss non funzionerà

Livello Trail Stop (punti): profitto (in punti) quando la funzione Trail Stop è abilitata
Trailing Stop (punti): la distanza tra lo stop loss (punti) e il prezzo di mercato.

Composizione del pannello:

Pannello ShiftX: lo spazio orizzontale nell'angolo in basso a destra.
Pannello ShiftY: distanza verticale dall'angolo in basso a destra.
Dimensione pulsante: imposta l'altezza del pulsante. La larghezza è tre volte l'altezza.
Dimensione carattere pulsante: imposta la dimensione del carattere per il pulsante.
Ridimensionamento globale: ridimensiona l'intero pannello.

Impostazioni della linea di arresto

Larghezza linea: la larghezza della linea di StopLine.
Colore linea: il colore della linea di arresto.
Dimensione carattere etichetta batch: dimensione del carattere dell'etichetta batch.
Colore etichetta batch: colore del testo dell'etichetta batch.

Calcolo in lotti

La dimensione del lotto è determinata dal capitale di rischio, dallo stop loss (in pip) e dal valore del pip.

Il capitale di rischio è l'importo di denaro che puoi perdere dal tuo ordine.

Lo stop loss è la distanza tra la linea di stop loss e il prezzo di mercato.

Supponiamo che tu selezioni Risk_Money come LotMode, imposti Risk_Money su $ 50, Risk Capital su 50 e sposti StopLine in una posizione a 100 pips dal prezzo di mercato sul grafico EURUSD. Il valore pip per EURUSD è 10, quindi la dimensione del lotto viene calcolata come segue:

Dimensione lotto = 50/(100*10) = 0,05.

In questo caso, la perdita per ordine è fissata relativamente a $50.

Perché non è stato completamente risolto? Questo perché i tassi incrociati non hanno valori fissi come EURGBP, EURAUD e AUDNZD.

Se selezioni Risk_Percent e imposti RiskPercent su 3, presupponendo un saldo del conto di $ 1.000, il calcolo è il seguente:

Capitale di rischio=1000*3%=30
Dimensione lotto = 30/(100*10) = 0,03.

In questo caso la perdita per ordine non è fissa e dipende dalla percentuale e dal saldo.

", "url": "https://www.mql5.com/it/market/product/24323", "small_icon": "https://c.mql5.com/31/190/quick-panel-pro-hedging-logo-60x60-4925.png", "middle_icon": "https://c.mql5.com/31/446/quick-panel-pro-hedging-logo-140x140-8391.png", "icon": "https://c.mql5.com/31/190/quick-panel-pro-hedging-logo-200x200-1588.png", "rating": 0, "price": 30, "published": 1500914056, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24325, "title": "Quick Panel Hedging", "description": "

Nota: questo EA funziona solo su account privi di rischio. Versione Metatrader 4 pannello rapido

Questo panel è un gruppo di sei consulenti esperti che costituiscono un panel di negoziazione.

caratteristiche

La maggior parte delle attività di trading può essere completata rapidamente facendo clic sui pulsanti su questi pannelli.
Passare da un pannello all'altro è facile come fare clic sul pulsante verde.
EA può essere eseguito sui grafici visivi di Strategy Tester e fornisce un modo semplice per esercitarsi nel trading utilizzando dati storici.
Modifica rapidamente lo stop loss e prendi i profitti con un clic del mouse (non disponibile per il backtesting)
Lo sfondo mostra il prezzo medio in un pannello giallo e disegna la linea del prezzo medio. clicca qui

cartello

Il dashboard contiene due colonne. La colonna di sinistra è per le vendite e quella di destra per gli acquisti.

sell: Aprire un ordine di vendita.
first: Chiudi il tuo primo ordine di vendita. Il primo riguarda gli orari di apertura.
last: Chiudere l'ultimo ordine di vendita. L'ultima riguarda gli orari di apertura.
all+: Chiudi l'ordine di vendita in modo redditizio.
all-: Chiudere l'ordine cliente in perdita.
max+: Chiudi gli ordini di vendita con il massimo profitto.
max-: Chiudi l'ordine di vendita con la massima perdita.
min+: Chiudi gli ordini di vendita con un profitto minimo.
min-: Chiudi l'ordine di vendita con perdite minime.
all: Chiudi tutti gli ordini di vendita.

buy: Apri il modulo d'ordine.
first: Chiudi il tuo primo ordine. Il primo riguarda gli orari di apertura.
last: Chiudere l'ultimo modulo d'ordine. L'ultima riguarda gli orari di apertura.
all+: Prendi i profitti e chiudi l'ordine di acquisto.
all-: Chiudi l'ordine in perdita.
max+: chiudi l'ordine con il massimo profitto.
max-: Chiudi l'ordine di acquisto con la massima perdita.
min+: chiude l'ordine con un profitto minimo.
min-: Chiudi l'ordine con perdite minime.
all: Chiudi tutti gli ordini.

biglietto

Magic Number: Numero magico di incantesimi aperti da questo EA.
Stop Loss in Pips: Stop loss (pip)
Take Profit in Pips: vantaggi con i pips
Max Buy Orders: Numero massimo di ordini di acquisto. Se 0, non c'è limite.
Max Sell Orders: Numero massimo di ordini cliente. Se 0, non c'è limite.
Max Buy Lots: Numero massimo di lotti per aprire un book ordini. Se 0, non c'è limite.
Max Sell Lots: Numero massimo di lotti per aprire un ordine cliente. Se 0, non c'è limite.
Lots Mode: Questo è un articolo che ha due opzioni. Le opzioni sono Lotti_fissi, Mille_Lotti.
Fixed Lots: Se selezioni Fixed_Lots come LotsMode, il tuo EA scambierà lotti fissi.
Lots Per Thousand: Se selezioni Mille_Lotti. Come LotsMode, EA calcola i lotti in base a questo rapporto.
ShiftX: Spazio orizzontale nell'angolo inferiore destro.
ShiftY: Spazio verticale nell'angolo in basso a destra.

Come vengono determinati i lotti?

Se selezioni OneThousand_Lots come LotsMode, i lotti verranno calcolati utilizzando la seguente formula:

Diciamo 0,05, margine libero = 3200.

Lotto calcolato = Margine libero /1000 * 3200/1000 * 0,05 = 0,16

Se MaxBuyLots (o MaxSellLots) è maggiore di zero, questo lotto di 0,16 viene confrontato con MaxBuylots (o MaxSellLots) e diventa il più piccolo.

Se MaxBuyLots (o MaxSellLots) non è maggiore di 0, non viene eseguito alcun confronto.

Confronta con altre versioni di QuickPanel Pro ( link ):

Quick Dashboard Pro: ogni ordine ha un SL/TP, dove TP equivale al rapporto rischio-rendimento SL*.
Pannello rapido: SL/TP di ciascun ordine dipende dall'input StopLossInPips/TakeProfitInPips, TP è indipendente da SL.

", "url": "https://www.mql5.com/it/market/product/24325", "small_icon": "https://c.mql5.com/31/190/quick-panel-hedging-logo-60x60-9544.png", "middle_icon": "https://c.mql5.com/31/446/quick-panel-hedging-logo-140x140-9760.png", "icon": "https://c.mql5.com/31/190/quick-panel-hedging-logo-200x200-4674.png", "rating": 0, "price": 30, "published": 1500914046, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24356, "title": "Modified TTM Squeeze Indicator MT5", "description": "

\r\n

\"The Squeeze indicator attempts to identify periods of consolidation in a market. In general the market is either in a period of quiet consolidation or vertical price discovery. By identifying these calm periods, we have a better opportunity of getting into trades with the potential for larger moves. Once a market enters into a \"squeeze,\" we watch the overall market momentum to help forecast the market direction and await a release of market energy.\"

\r\n

The Modified TTM Squeeze Indicator is a modification of John Carter's TTM Squeeze volatility indicator, designed to give faster entry points than the original. This indicator is designed to identify both entry and exit points for major price movements. Green and red histograms depict upward and downward price movements, respectively. Darker histogram bar colors indicate that the trend is fading. Black crosses on the midline signify price squeezes, while grey crosses signify a release from squeeze. Trade in the direction of the trend on the first grey cross after a squeeze. Exit when trend fades (darker green/red).

\r\n

Do you prefer the original TTM Squeeze? This Modified TTM Squeeze Indicator allows you to switch between modified and traditional squeeze indicators.

\r\n

Trading Strategies

\r\n

There are many trading strategies described for the TTM Squeeze indicator, all of which can also be used with the Modified TTM Squeeze indicator. A simple effective strategy is described below:

\r\n

Wait for a squeeze period, which lasts at least 3 bars
On the first grey bar (release from squeeze), trade in the direction of the trend. (i.e., if the Modified TTM Squeeze value is above zero, place a call; if the indicator value is below zero, place a put)
Exit trade when price enters the next squeeze (risky) or when the trend fades, indicated by darker green/red histogram bars (conservative)

\r\n

An excellent setup is when two or more major timeframes are in a squeeze. Enter the trade when the lower timeframe is released from the squeeze. For example, both 15min and 5min periods are in a squeeze period. Enter trade when 5min period is released from squeeze. While squeeze patterns in higher timeframes generally indicates a larger move, anecdotally in forex, TTM squeeze works best on the 4 hour period and shorter.

\r\n

The Modified TTM Squeeze also pairs well with ADX indicators.

\r\n

Parameters

\r\n

BB length (Default=20): Number of bars used to calculate Bollinger Bands, used for squeeze
BB multiplier (Default=2.0): Number of standard deviations used for Bollinger Bands
KC length (Default=20): Number of bars used to calculate Keltner Channel, used for squeeze
KC multiplier (Default=1.5): Multiplier used for Keltner Channel
Use original TTM (Default=false): If true, changes indicator to the traditional TTM squeeze. If false, the indicator uses the modified TTM squeeze, with improved momentum calculation
Allow alerts (true/false): If false, prevents any alerts
Alert when squeeze begins (true/false): If true, sends alert on squeeze onset
Alert when squeeze is released (true/false): If true, sends alert when squeeze is released
Alert when trend fades (true/false): If true, sends alert when up or downtrend fades (as indicated by a darker green/red line on histogram)
Turn on alert message (true/false): If true, alerts will create a message box
Turn on alerts sound (true/false): If true, alerts will play a sound
Turn on alerts email (true/false): If true, alerts will send an email

", "url": "https://www.mql5.com/it/market/product/24356", "small_icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-60x60-3980.png", "middle_icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-140x140-2218.png", "icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-200x200-9945.png", "rating": 5, "price": 149, "published": 1500987046, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24359, "title": "DYJ Follow Me For MT5", "description": "

DYJ Follow Me is an EA that follows the virtual transaction record of any dyj indicator to actually open and close positions.

It can display the name and status of the indicator of the single signal source; At present, it is only the DYJ SignalSourceOfWPR MT5 indicator, and more indicators will be expanded in the future.

It can receive real-time trend direction of indicator.

It can receive the latest admission time of the indicator.

It can receive the latest admission price of the indicator.

It can display the profit button of multiple currency pairs, and the total number of positions is also displayed on the button.

A button that displays the number of multiple currency pair pending orders. You can delete a currency pair pending order at any time or delete all currency pair pending orders.

You can click the button to close the total profit of a currency pair or the profit of all currency pairs at any time according to the profit size.

You can set one order at a time, and the number of fixed lots per order is 0.01, etc. or 1 lot or higher or follow the indicator trading volume.

Set up dynamic profit tracking.

Set the capping profit target.

Automatically delete pending orders when closing the warehouse.

Display each profit and total profit of multiple currency pairs at the same time.

Set the percentage of total loss to force closing.

INPUT

InpSignalOrigin = \"WPR\"; -- 1. DYJ_T3:DYJ T3MA. 2. WPR: WPR indicator. 3. ALG: Alligator indicator. 4. MACD:MACD indicator. 5.DYJ PMT. 6. DYJ BOS.

InpMaxTrades = 1;

InpVolume = 1;

InpMagicNumber = 1234;

PROFIT = 30.00 --> Orders will be closed as soon as the all profit is equal or above the preset PROFIT.
APROFIT = 25.00 --> Orders will be closed as soon as the symbol profit is equal or above the preset PROFIT.
InpTrailingPercentage = 0.7 --> Dynamic profit target:70%
InpTargetIncreaseCoeff = 0.5 --> Dynamic Target Increase coefficient
InpIsOpenOrder = OpenOrders --> 1.OpenOrders:OPEN AND PENDING MODE. 2.OpenDisable: ONLY PENDING MODE
InpGridMode = STOP_MODE -->

1. BUYSTOP_MODE: ONLY BUYSTOP MODE.

2. SELLSTOP_MODE: ONLY SELLSTOP MODE.

3. STOP_MODE: ONLY STOP BOTH MODE.

4. BUYLIMIT_MODE: ONLY BUYLIMIT MODE.

5. SELLLIMIT_MODE: ONLY SELLLIMIT MODE.

6. LIMIT_MODE: ONLY LIMIT BOTH MODE.

7. BOTH_MODE: ONLY ALL BOTH MODE.

InpMaxGridOrders = 1 --> Maximum Grid Orders(Pending).[\"0\"->off :disable grid].
InpFristOrderStep = 200 --> Frist Order Step(POINTS) .
InpOrderStep = 100 --> Order Step(POINTS) .
ISEQUITY -> ENABLE / DISABLE CLOSE FOR EQUITY.
EQUITY -> $1.00. Orders will be closed as soon as the Current Equity is lower than the preset EQUITY.
TargetLossPercent=0 --> LossPercent (%)[0-off] total Loss=blance*LossPercent
IsDeletePendingOrderForClose = false --> Automatically delete pending order if all or symbol is closed.

", "url": "https://www.mql5.com/it/market/product/24359", "small_icon": "https://c.mql5.com/31/1057/soarmulticurrency-for-mt5-logo-60x60-9144.png", "middle_icon": "https://c.mql5.com/31/1057/soarmulticurrency-for-mt5-logo-140x140-7977.png", "icon": "https://c.mql5.com/31/1057/soarmulticurrency-for-mt5-logo-200x200-6374.png", "rating": 0, "price": 30, "published": 1707886620, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24394, "title": "Channel FTF MT5", "description": "

The Envelopes indicator determines the presence of a trend or flat. It has 3 types of signals, shows the probable retracement levels and levels of the possible targets.

The Fibonacci coefficients are used in the indicator's calculations.

Signals (generated when touching the lines or rebounding from lines):

Trend - the middle line of the Envelopes has a distinct inclination; the lines below the channel's middle line are used for buy trades, the lines above the middle line and the middle line itself are used for sell trades;
the trade direction must match the direction of the channel's middle line.
Flat - the middle line of the Envelopes is horizontal; signals are received from the edge and pre-edge borders of the channel with the targets at the opposite border of the channel.
Volatility breakout - edge borders of the channel are horizontal; breakout of one of these channel borders indicates a beginning of a movement.

The indicator has an alert system: a standard terminal alert, a message to a mobile terminal, an email message.
In the Alert_Additional_Symbols setting, you can configure alerts for additional tools other than the current tool.

To use the indicator in the Expert Advisors, there are the following indicator buffers.

Settings

It is possible to modify the color, width and type of any indicator line.
Period_Trend - trend period.
Period_Vol - volatility period.
Alert_ID - is a unique alert label.
Alert_Additional_Symbols - separated by commas, you can specify additional tools for which alerts will be received
(this is not required for the current tool).
Send_Notification - on/off notification to the mobile terminal.
Send_Alert - on/off the standard terminal notification.
Send_Mail - on/off email notification.

", "url": "https://www.mql5.com/it/market/product/24394", "small_icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-60x60-2181.png", "middle_icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-140x140-3539.png", "icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-200x200-9864.png", "rating": 0, "price": 50, "published": 1502271718, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24400, "title": "Average True Power MT5", "description": "

Strongest and Weakest Currency Analysis

\r\n

This product shows the strength of the main currencies in FOREX based on average pip gain/loss in different time-frames!

\r\n

Depending on the strength of the currency, the indicator colors changes from blue to red also the orders may also be changed, allowing you to find the strongest and weakest currency at a glance!

\r\n

Advantages

\r\n

Whatever your trading method and strategy are, it is always important to choose the correct pairs, so this indicator will help you answer this question by calculating the average pip gain/loss of each currency and also help you to find the direction of the trends!

\r\n

Features

\r\n

Shows the power of 8 main currencies in FOREX.
Shows powers in different time-frames from M1 to Daily.
For the sake of comparison it also shows the power of Yesterday!
Easy, nice and user-friendly interface which help you monitor the market live!
It shows the average pip gain/loss of each currency in different periods.
It sorts the currencies in each period based on the power of them, so the strongest one is always on top and the weakest one is in the lowest level.

\r\n

Input Parameters

\r\n

You can put the indicator on any Currency pairs (Suggested EURUSD) and on any Time-frames (Suggested M1).

\r\n

BackGround – You can set your favorite color for panel-background, default is Black;
Time_frames – You can set your favorite color for time-frames, default is Gold;
Bullish – You can set your favorite color for Bullish currency, default is DodgerBlue;
Bearish – You can set your favorite color for Bearish currency, default is Red;

\r\n

Notes

\r\n

When the color of the value is red, it means it is less than zero (we don’t show the minus sign).

", "url": "https://www.mql5.com/it/market/product/24400", "small_icon": "https://c.mql5.com/31/191/average-true-power-mt5-logo-60x60-9213.png", "middle_icon": "https://c.mql5.com/31/441/average-true-power-mt5-logo-140x140-9152.png", "icon": "https://c.mql5.com/31/191/average-true-power-mt5-logo-200x200-6857.png", "rating": 0, "price": 100, "published": 1500980955, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24402, "title": "DYJ CashRegister", "description": "

DYJ CashRegisterEA lavora sugli indicatori tecnici DYJ. Quando il mercato è forte ,
Questo EA trova l'opportunità e il commercio nel mercato sicuro. Guadagno coerente con tempo sicuro di trading.
EA utilizza una modalità di ordine per ridurre al minimo il volume delle transazioni e massimizzare la strategia dell'algoritmo di chiusura dei profitti.

Niente trading.
Niente arbitraggio.
Niente Hedge.
Niente Martingale.

Please download the setting file and the PDF file of the back test report in the product comment area

Recommendations

Input

InpMagic = 12365321
InpLots = 0.001
InpTakeProfit = 0.
InpStoploss = 0.

", "url": "https://www.mql5.com/it/market/product/24402", "small_icon": "https://c.mql5.com/31/718/dyj-cashregister-logo-60x60-7871.png", "middle_icon": "https://c.mql5.com/31/718/dyj-cashregister-logo-140x140-4421.png", "icon": "https://c.mql5.com/31/718/dyj-cashregister-logo-200x200-3908.png", "rating": 0, "price": 35, "published": 1648624445, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 24426, "title": "TSO Top Bottom Divergence MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with RSI divergence detection.

\r\n

Features

\r\n

Easily detect strong reversal signals.
Allows to use double top/bottom and RSI divergence signals combined or independently.
Get email and/or push notification alerts when a signal is detected.
Custom colors can be used.
The indicator is not repainting.
Can easily be used in an EA. (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the RSI divergence indicator.
RSI Period: Set the period of the RSI.
RSI Applied Price: The bar price to be used for RSI calculations.
Relationship between Double Top-Bottom and RSI Divergence:

Combined: All Double Top - Bottom signals are shown but only the RSI Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and RSI Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If RSI Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

RSI value: Buffer = 0
Divergence Signal: Buffer = 1

Buy = 0
Sell = 1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy = 0
Sell = 1

", "url": "https://www.mql5.com/it/market/product/24426", "small_icon": "https://c.mql5.com/31/191/tso-top-bottom-divergence-mt5-logo-60x60-2861.png", "middle_icon": "https://c.mql5.com/31/439/tso-top-bottom-divergence-mt5-logo-140x140-1116.png", "icon": "https://c.mql5.com/31/191/tso-top-bottom-divergence-mt5-logo-200x200-2019.png", "rating": 0, "price": 39, "published": 1501506987, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24503, "title": "TSO Fibonacci Chains MT5", "description": "

Fibonacci retracement is a method of technical analysis for determining support and resistance levels. The TSO Fibonacci Chains Indicator is different from a simple Fibonacci Retracements indicator in that it provides the targets for each retracement level. In other words, there is an Extension Level (D) for every Retracement Level (C). In addition, if an Extension Level is reached, then a new Fibonacci setup is created automatically. These consecutive Fibonacci setups create a chain that reveals very useful information about an asset and it helps to make better trading decisions.

SCANNER is included. Now with Fibonacci Scanner you can find trading opportunities and trading setups easily and faster.

How it works:

The indicator scans the whole graph to detect points of highest and lowest price level.
It then starts calculating Fibonacci chains up until today.
On the graph, only the latest Uptrend and Downtrend Fibonacci chains are shown

Fibonacci Levels:

Α: Low (Uptrend) / High (Downtrend)
B: High (Uptrend) / Low (Downtrend)
C: Retracement (always at the lowest LOW (uptrend) or highest HIGH (downtrend) within the A-B range)
D: Extension (Target)

C Retracement Levels and D Extension Levels:

38.2% - > 1.618%
50.0% - > 1.618%
61.8% - > 1.618%
78.6% - > 1.270%
86.0% - > 1.180%

Fibonacci calculation

When the A, B and C levels have been formed followed by a HIGH/LOW* at the corresponding D Level, then the current Fibonacci block is considered complete and a new block is started.
The A and B levels of the new Fibonacci block are based on the previous block, i.e. Α_new = C_old and B_new = D_old. This way, a chain of consecutive Fibonacci blocks is formed, with the last block being the active one.
The chain is broken when the price moves below (uptrend) or above (downtrend) the A level of the last Fibonacci block.

*a HIGH/LOW occurs when the third (middle) candle out of 5 consecutive candles has a higher/lower HIGH/LOW than the two candles before and after it.

Strategies

First two steps for any strategy

Locate the latest valid (containing at least 2 complete Fibonacci blocks) uptrend and downtrend Fibonacci chains.
Select the one that is dominant, i.e. the direction (uptrend or downtrend) that contains the most completed Fibonacci blocks in its latest chain.

Conservative

For the dominant chain find previous support/resistance levels close to the C levels (61.8%, 78.6% and 86.0%)*
Wait for a LOW/HIGH to be created on these levels (if the Uptrend or Downtrend Fibonacci chain is dominant respectively)
If the above criteria are met, enter using an entry strategy such as a candlestick pattern, a trend line break, a crossing moving average (e.g. 5-period and 10-period MAs) etc.
The safest level for the Stop Loss is a few pips above (downtrend) or below (uptrend) the A level of the last Fibonacci block. The Take Profit should be placed at the corresponding D level.

Stop Loss and Take Profit can also be set as in step 3 of the Aggressive Strategy.

Aggressive

For the dominant chain, wait for a C LOW/HIGH (Uptrend/Downtrend Fibonacci chain respectively) to be formed at any Fibonacci Level.
If the above criteria are met, enter using an entry strategy such as a candlestick pattern, a trend line break, a crossing moving average (e.g. 5-period and 10-period MAs) etc.
Place the Stop Loss a few pips above the current LOW (uptrend) or below the current HIGH (downtrend) and a Take Profit at the corresponding D Extension level or at a distances 2-3 times larger than the stop loss (Risk/Reward Ratio 1:2 or 1:3)
If the above criteria are met more than once, create additional positions with Stop Loss and Take Profit levels as described in step 3.
In case a position is closed due to the price level reaching the Stop Loss, open the same position again if the same criteria are met again.

Very Aggressive

For the dominant chain, place pending orders at multiple Fibonacci Levels (e.g. 61.8%, 78.6% and 86.0%).
Place the Stop Loss a few pips above (downtrend) or below (uptrend) the A level of the latest Fibonacci block. The Take Profit should be placed at the corresponding D level (1.270%).
Follow this procedure for every new Fibonacci created.

", "url": "https://www.mql5.com/it/market/product/24503", "small_icon": "https://c.mql5.com/31/192/tso-fibonacci-chains-mt5-logo-60x60-3460.png", "middle_icon": "https://c.mql5.com/31/445/tso-fibonacci-chains-mt5-logo-140x140-1885.png", "icon": "https://c.mql5.com/31/192/tso-fibonacci-chains-mt5-logo-200x200-6416.png", "rating": 0, "price": 199, "published": 1501506995, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24578, "title": "Time Filter Extended", "description": "

The TimeFilter indicator allows visually selecting the bitmaks (GoodHourOfDay, BadHoursOfDay, GoodDayOfWeek, BadDaysOfWeek), which correspond to the Standard Library's Intraday Time Filter module for trading signals.

\r\n

Additionally, it is possible to enable and disable the trading intervals in a string form. It is also possible to use the trade volume multiplier when using the indicator as a part of an EA. String format: [week day]:[first hour]-[last hour]. See the screenshots and the video for usage examples.

\r\n

Parameters

\r\n

BadDaysOfWeek - 'forbidden days' bitmask.
GoodDayOfWeek - 'allowed day of the week' bitmask.
BadHoursOfDay - 'forbidden hours' bitmask.
GoodHourOfDay - 'allowed hours' bitmask.
time filter ban interval - trading intervals to disabling trading as a string.
time filter allow interval - trading intervals to enabling trading as a string.
lot factor - trade volume multiplier.
lot factor allow interval - trading intervals to changing volumes as a string.
time filter hours shift - time shift in hours.
future bars - the number of bars for showing the future values of the indicator.

\r\n

Using time filters when performing trade operations allows considering the peculiarities of each trading session.

", "url": "https://www.mql5.com/it/market/product/24578", "small_icon": "https://c.mql5.com/31/193/time-filter-extended-logo-60x60-4804.png", "middle_icon": "https://c.mql5.com/31/445/time-filter-extended-logo-140x140-5243.png", "icon": "https://c.mql5.com/31/193/time-filter-extended-logo-200x200-2800.png", "rating": 0, "price": 30, "published": 1502375897, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24605, "title": "Color Stochastic with an analytical panel", "description": "

The main advantage of this indicator is filtering of buy and sell signals in the direction of the market impulse and ranking them by strength. Configuration of the indicator is simple and intuitive. All you need to do is to react only to strong signals. Adhere to the money management rules.

\r\n

Description

\r\n

The Color Stochastic with an analytical panel indicator consists of the Stochastic indicator itself and the information/analytics panel. The indicator provides options for configuring the parameters and adjusting the colors. You can customize the color scheme, thickness and appearance of the lines. The information/analytics panel displays the values of the %K and %D lines of the Stochastic, as well as their difference for different periods. The bottom of the panel displays trading recommendations.

\r\n

No Trade - stay out of the market.
Weak BUY/SELL Signal - weak buy/sell signal. Trading this signal is not recommended. It usually means a corrective movement.
BUY/SELL Signal - buy/sell signal. It is recommended to open positions.
Strong BUY/SELL Signal - strong buy/sell signal. It is highly recommended to open positions.

\r\n

The Keep... recommendations indicate a continuation of the corresponding trend. Keep your position and increase profits.

\r\n

The indicator allows selecting M30, H1, H4 or D1 as the working period. Thus, with this indicator you will be able to trade both with a day and during multiple days and weeks. Users can customize the color scheme of the information/analytics panel. The default settings are as follows.

\r\n

Black dot - indicator values are in the neutral zone.
Red down arrow - Stochastic is in the overbought zone. A downward reversal is expected.
Green up arrow - Stochastic is in the oversold zone. An upward reversal is expected.

\r\n

Red and green colors mean a decrease and an increase in the indicator values relative to the previous ones.

\r\n

Working with the indicator

\r\n

The Color Stochastic with an analytical panel indicator provides tremendous opportunities for analyzing the market situation and making trading decisions. But even if you do not have this experience, you can work effectively using the recommendations. Below are some tips that will help you in analyzing the market situation.

\r\n

Change in the color of the Stochastic lines indicates a market reversal.
Position of the Stochastic above/below the 50 level indicates an uptrend/downtrend.
The sto_overbuy and sto_oversold parameters allow setting a filter, where the buy/sell signals are to be ignored.
The signals from the working periods (M30, H1, H4, D1) should be taken only in the context of the tendencies on the higher periods. The smaller periods serve as confirmation of the signals from the working periods. For this purpose, you can use divergence, position of the indicator relative to the 20, 50, 80 levels, the development of the Stochastic rise/fall during a certain period.
The more values of the same color are present in the Variance column, the stronger the signal and the stronger the market impulse.
The more periods are in the overbought/oversold areas, the more probable is the previous movement to end and change.
A change in the trend on the smaller periods indicates that the tendency on the higher periods will change soon.

\r\n

It should be noted that the Color Stochastic with an analytical panel indicator alone is not sufficient for a successful trading. Make sure you use trend indicators and support/resistance levels in your trading.

", "url": "https://www.mql5.com/it/market/product/24605", "small_icon": "https://c.mql5.com/31/194/color-stochastic-with-an-analytical-panel-logo-60x60-3108.png", "middle_icon": "https://c.mql5.com/31/440/color-stochastic-with-an-analytical-panel-logo-140x140-8394.png", "icon": "https://c.mql5.com/31/194/color-stochastic-with-an-analytical-panel-logo-200x200-7503.png", "rating": 5, "price": 65, "published": 1502211150, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24639, "title": "Fibo Alert Ultimate MT5", "description": "

This tool adds alerts to your Fibo Retracement and Fibo Expansion objects on the chart. It also features a handy menu to change Fibo settings easily and quickly!

\r\n

Please note the product is not working as a demo. Please watch the video.

\r\n

Features

\r\n

Alert for Fibo Retracement and Fibo Expansion levels.
Sound, Mobile and Email alert.
Up to 15 Fibo Levels.
Continuous sound alert every few seconds till a user clicks on the chart to turn it OFF.
Single sound alert with pop-up window.
Keeping all user settings even after changing timeframes.
New handy menu to change Fibo settings easier.
Auto bring the chart to the top of other charts when alerting.
Fully customizable, including Fibo level's values, colors, levels that you want or you do not want.
Auto hide menu.

\r\n

How to Use It

\r\n

Add indicator to the chart.
Select any Fibo Retracement or Fibo Expansion object on the chart.
The indicator's menu will appear on the left side of your chart.
Choose your desired color, levels, style and click OK.

\r\n

How It Works

\r\n

When price hits any of Fibo levels:

\r\n

Level will start blinking.
In case the chart is behind other charts and is not visible, it will come to the foreground automatically.
Indicator will start continuous sound alert. So, in case if you were not at your computer at the time of alert, you will not miss it.
A Mobile and Email notification will be sent.
Indicator will change the Fibo level description to \"Was Hit\", so you will not get an alert on this level again.
When a trader clicks on the chart, continuous sound alert will be OFF.

\r\n

Parameters

\r\n

Level 1 to Level 15: Default fibo level values buttons
Color 1 - Color 3: Colors available in the panel to choose
Bring the chart to the top Automatically: When a fibo level was hit it will bring the chart to the top of other charts automatically.
True for Continually sound alert False for Single pop of Alert: Determines the Alert sound type.
Alert speed: The speed of continually sound alert (in Seconds)
Change Color After Hit to: Determines the Fibo level color after it was hit by price.

\r\n

Also available for MT4 Here: https://www.mql5.com/en/market/product/6760

", "url": "https://www.mql5.com/it/market/product/24639", "small_icon": "https://c.mql5.com/31/194/fibo-alert-ultimate-mt5-logo-60x60-7581.png", "middle_icon": "https://c.mql5.com/31/438/fibo-alert-ultimate-mt5-logo-140x140-3768.png", "icon": "https://c.mql5.com/31/194/fibo-alert-ultimate-mt5-logo-200x200-9061.png", "rating": 0, "price": 31.75, "published": 1502727726, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24673, "title": "Heiken Ashi and Heiken Ashi Smoothed MA MT5", "description": "

Heiken Ashi Smoothed Strategy is a very simple but powerful system to get forex market trend direction.

\r\n

This indicator is actually 2 indicators in 1 pack, Heiken Ashi and Heiken Ashi Smoothed Moving Average both included.

\r\n

Because HA (Heiken Ashi) and HAS (Heiken Ashi Smoothed) are calculated in the same one system event with necessary buffers and loop only, so it is the FAST, OPTIMIZED and EFFICIENT HA having the combined indicator of MetaTrader 5.

\r\n

You can choose to display HA and HAS in the same time, or display one of them only.

\r\n

Inputs

\r\n

Display Heiken Ashi: true = display Heiken Ashi, false = hide and do not calculate.
Display Heiken Ashi Smoothed: true = display Heiken Ashi Smoothed, false = hide and do not to calculate.
Method of Moving Average To Generate Heiken Ashi Smoothed: Simple, Exponential, Smoothed, Linear weighted, four modes of moving average supported to generate Heiken Ashi Smoothed.
Period of Moving Average To Generate Heiken Ashi Smoothed: Period of moving average to generate Heiken Ashi Smoothed.
Method of Moving Average Of Heiken Ashi Smoothed: Simple, Exponential, Smoothed, Linear weighted, four modes supported to calculate Moving Average of Heiken Ashi Smoothed.
Period of Moving Average Of Heiken Ashi Smoothed: Period of Moving Average of Heiken Ashi Smoothed.

", "url": "https://www.mql5.com/it/market/product/24673", "small_icon": "https://c.mql5.com/31/194/heiken-ashi-plus-heiken-ashi-smoothed-logo-60x60-5440.png", "middle_icon": "https://c.mql5.com/31/439/heiken-ashi-and-heiken-ashi-smoothed-ma-mt5-logo-140x140-7421.png", "icon": "https://c.mql5.com/31/194/heiken-ashi-plus-heiken-ashi-smoothed-logo-200x200-5323.png", "rating": 5, "price": 77.77, "published": 1502790557, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24712, "title": "Gekko Jade A Customizable EA", "description": "

Instrument: works with forex currency pairs, futures and stocks.

\r\n

Type: Scalper, Short Trade, Swing Trade, Day Trade, Buy and Hold.

\r\n

Description

\r\n

Gekko Jade series are EAs designed to be versatile providing more than 50 input parameters to be combined in different ways;
Allows Day and Position Trading;
Allows control of trading time windows;
Allows different types parameters and strategies for entering and exiting the market;
Suitable for beginners and experts;
Adapts to any timeframe;
Allows configuration of slippage, commission and spread for more realistic backtesting.

\r\n

Inputs

\r\n

General Setup: inform volume, maximum of entries per day, trading direction and profit target for the day;
Timing Windows: inform time ready to trade, limit time to enter the market and time to close all positions;
Indicators: choose between up to five indicators to confirm entry or exit (tringgering one or all of them to confirm a trade);
Profit and Loss: activate different controls as: simple Take Profit, Stop Loss, Breakeven, Trailing Stop
Metrics options: configure TP and SL based on pips, price, points, ticks, financial value, % of equity or % of entry price.
Alerts: configure real time alerts by e-mail and mobile push notifications for important events;
Backtesting setup: configure commission, spread and slippage and make your backtestings more realistic.

\r\n

Available Indicators

\r\n

HiLo Activator: activate and configure HiLo Activator swings to determine strong entry and exit points;
Relative Strenght Index: activate and configure RSI's boundaries to determine strong entry and exit points;
Price vs. Moving Average Crossing: activate and configure the price vs. Moving Average crossings to determine strong entry and exit points;
Two Moving Averages Crossing: activate and configure two different Moving Averages crossings to determine strong entry and exit points;
High's and Low's Breaking: activate and configure \"x\" last bars highs and lows breaking to determine strong entry and exit points.

\r\n

Recommendations

\r\n

Be reminded:

\r\n

Stocks, forex and futures trading contains substantial risk and is not for every investor. An investor could potentially lose all or more than the initial investment;
Risk capital is money that can be lost without jeopardizing ones financial security or life style. Only risk capital should be used for trading and only those with sufficient risk capital should consider trading;
Past performance is not necessarily indicative of future results;
Use the bots with caution:

\r\n

Before buying the EA, download the demo and perform tests;
Before trading in real account, trade for a period of time in a demo account or in a real account but with reduced lot sizes.

\r\n

Good Trades!

\r\n

Donate part of your profit to good causes and humanitarian entities of your choice. \"Money only comes if there's a purpose for you to earn it\".

", "url": "https://www.mql5.com/it/market/product/24712", "small_icon": "https://c.mql5.com/31/195/gekko-jade-a-customizable-ea-logo-60x60-3582.png", "middle_icon": "https://c.mql5.com/31/445/gekko-jade-a-customizable-ea-logo-140x140-1734.png", "icon": "https://c.mql5.com/31/195/gekko-jade-a-customizable-ea-logo-200x200-4217.png", "rating": 0, "price": 40, "published": 1504521184, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 24880, "title": "Impro Martin", "description": "

This Impro Martin is an enhanced Expert Advisor (EA) based on Martingale’s strategy. Instead of using a clear admittance signal, it uses random admittance , and deals with the subsequent orders according to the status of the first order. It had in-depth optimization of risk management and lots dispose to reduce transaction risk. At the same time, this product also has the functions of Trailing Stop Loss (the gained profit is protected from any lost, so as to maintain the growth of profit) and Fixed Stop Loss (the stop value allowed by each order).

\r\n

Use suggestion

\r\n

This EA is ideal for cross currency pairs, such as AUDCHF、AUDNZD. For different currency pairs, the values of the parameter StepDist differ. Such as EURUSD, GBPUSD would have larger StepDist values due to their larger point values.
The advantage of this EA is to fluctuate trading, so there is a very unilateral market trend is very strong, may not be easy to use; You have two options: or stop to wait for the opportunity, either set the TrailStart value and the TrailStep value to a relatively small value.
Although EAs can work on their own, they still need to be taken care of. Occasionally you need to observe the results, probably once every three days, which is not too frequent.

\r\n

Parameters

\r\n

StepDist - Step between the current price and the price of the pending order.
FirstLot - FirstLot (position + pending orders = 0).
IncLot - IncLot (position + pending orders > 0).
TrailStart - Start trailing points(Profit>0,if TralStart+TralStep>0,TralStart is the profits of get ).
TrailStep - Trail-length step in points.（Mobile profit）
StopLoss_ - Trailing Stop-loss in points.
SL - Fixed stop-loss.
Deviation_ - Max. Price deviation in points.

", "url": "https://www.mql5.com/it/market/product/24880", "small_icon": "https://c.mql5.com/31/197/impro-martin-logo-60x60-6902.png", "middle_icon": "https://c.mql5.com/31/439/impro-martin-logo-140x140-3119.png", "icon": "https://c.mql5.com/31/197/impro-martin-logo-200x200-9562.png", "rating": 0, "price": 199, "published": 1506597512, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 24882, "title": "FFx Basket Scanner MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/24881

FFx Basket Scanner is a global tool scanning all pairs and all\r\n timeframes over up to five indicators among the 16 available. You will \r\nclearly see which currencies to avoid trading and which ones to focus \r\non.

\r\n

Once a currency goes into an extreme zone (e.g. 20/80%), you can \r\ntrade the whole basket with great confidence. Another way to use it is \r\nto look at two currencies (weak vs strong) to find the best single pairs\r\n to trade.

\r\n

The panel is fully flexible for easy use

\r\n

Alert at extreme %
Select up to nine timeframes (any combination)
Select up to five indicators among the 16 available
Maximize/minimize the panel to keep only the essential or the whole information visible
One-click to open the symbols chart with selected template and timeframe

\r\n

User Inputs

\r\n

Dashboard ID: number for each instance applied on the same chart.
Candle Close: set here if you want the calculation to be done at candle close or in real time (current candle).
Currency: select here the currency for the panel calculation.
Horizontal/Vertical Shift: set here any number to place the dashboard anywhere on the chart.
Template Name: name of the template you want to be applied when a pair is clicked and chart opened
Timeframe: timeframe you want to be applied when a pair is clicked and chart opened
Strong/Weak Levels %: from 0 to 100 when levels are reached, it can give an alert (popup/sound/email/push). Alert can be activated/deactivated by switching any of the true/false parameters.
Then, all usual parameters for the standard indicators like the ones provided in your MetaTrader 4 platform (see below).

\r\n

The panel can be displayed in a compact mode to monitor only the meter and timeframes selection (see images below).

\r\n

Moving Average

Period: period of the MA
Shift: shift of the MA
Method: method of the MA
ApplyTo: applied price of the MA

MACD

FastEMA: fast EMA period of the MACD
SlowEMA: slow EMA period of the MACD
SignalSMA: SMA period of the MACD
Applied Price: applied price of the MACD

Stochastic

KPeriod: k period of the STO
DPeriod: d period of the STO
Slowing: slowing of the STO
MAMethod: method of the STO
PriceField: applied price of the STO

RSI

Period: period of the RSI
ApplyTo: applied price of the RSI

WPR

Period: period of the WPR

Momentum

Period: period of the Momentum
ApplyTo: applied price of the Momentum

CCI

Period: period of the CCI
Applied Price: applied price of the CCI

ADX

Period: period of the ADX

PSAR

Step: step of the PSAR
Maximum: maximum of the PSAR

DeMarker

Period: period of the DeMarker

Bulls

Period: period of the Bulls

Bears

Period: period of the Bears

Force Index

Period: period of the Force Index
Method: method of the Force Index
Volumes: volumes of the Force Index

", "url": "https://www.mql5.com/it/market/product/24882", "small_icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-60x60-2593.png", "middle_icon": "https://c.mql5.com/31/438/ffx-basket-scanner-mt5-logo-140x140-1521.png", "icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-200x200-3578.png", "rating": 0, "price": 3030, "published": 1503484085, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24897, "title": "Eagle Scalper MT5", "description": "

A scalper system only work during Asian hours.
Several unique indicators to detective the price fluctuation.
Dynamic TP/SL level according to market conditions.
Fixed stoploss to protect the capital, very low risk of losing a lot of money.
No need to obtain SET files. The parameters are the same for each currency pair.

\r\n

It is optimized to work on EURAUD.

\r\n

It is recommended to use Eagle Scalper on M15 chart.

\r\n

It is recommended to run it on a real ECN broker with very low spread.

\r\n

It is recommended to set the \"Risk\" below 10.

\r\n

It is recommended to do 99.9% modeling quality backtest.

\r\n

Signals: https://www.mql5.com/en/signals/author/oodd008

\r\n

Backtests: https://www.mql5.com/en/users/oodd008/blog

\r\n

Parameters

\r\n

Lots - use fixed lot size.
Risk - calculate the lot size dynamically as a fixed value of the capital, only works when the \"Lots\" is set to be 0.
Auto_GMT_Offset - If true, when live trading, GMT_Offset will be automatic calculated by the EA.
GMT_Offset - when backtesting enter the GMT time of your broker. When trading, it is automatically set by the system.
EA_Comment - place your personal comment.
MAGIC - magic number, it is set for each currency pair by default.
Max_Spread - maximum spread allowed to open an order.
Show_Info - Turn on/off info panel on the chart.
TakeProfit - take profit value of each order.
StopLoss - stop loss value of each order.
Open_Hour - start trading hour.
Close_Hour - end trading hour.
Trade_On_Friday - turn on trading on Friday.
Friday_Hour - end trading hour on Friday.
Allow_Second_Order - choose the option if you allow a second order.
Second_Order_Distance - the distance between first order and second order.
Second_Lot_Factor - the lot size factor of second order.
Direction :

Both Sides: open both buy and sell order
Only_Buy: only open buy order
Only_Sell: only open sell order

Use_Internal_Inputs - if true, EA will use internal value for the inputs below; If false, EA will use value that you give to the inputs below.
Use_Indicator1 - turn on Indicator1.
Indicator1_Period - the period of Indicator1.
Indicator1_Entry - the entry value of Indicator1.
Indicator1_Exit - the exit value of Indicator1.
Use_Indicator2 - turn on Indicator2.
Indicator2_Period - the period of Indicator2.
Indicator2_Entry - the entry value of Indicator2.
Indicator2_Exit - the exit value of Indicator2.
Use_Indicator3 - turn on Indicator3.
Indicator3_Entry - the entry value of Indicator3.
Indicator3_Exit - the exit value of Indicator3.

", "url": "https://www.mql5.com/it/market/product/24897", "small_icon": "https://c.mql5.com/31/197/eagle-scalper-mt5-logo-60x60-1513.png", "middle_icon": "https://c.mql5.com/31/441/eagle-scalper-mt5-logo-140x140-6814.png", "icon": "https://c.mql5.com/31/197/eagle-scalper-mt5-logo-200x200-2251.png", "rating": 0, "price": 5000, "published": 1503481705, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 24902, "title": "EasyTrades", "description": "

Small trading panel for managing orders and positions in 1 click for MetaTrader 5

The version for MetaTrader 4 is here, you can check it in the tester without restrictions

Set hidden TakeProfit, StopLoss and pending orders at lines placed on the chart.
Virtual breakeven.
Virtual trailing stop.
Close all positions.
Close only Buy positions.
Close only Sell positions.
Work in the back testing mode (working in the tester is limited).
Place up to 20 virtual orders.
News trading and operation by time.
Alert - play a sound alert when the price reaches a level.
Automatically close positions by total profit in the deposit currency on the entire account or by symbol.

Description

It is compact and occupies very little space on the chart. You can drag it to anywhere on the chart or minimize it to free space.

It is convenient for pipsing and scalping. For comfortable trading, apply it with the \"VisualInfoMoves\" indicator.

Great functionality, hidden StopLoss, TakeProfit and pending orders remove the restriction on the minimum distance, thus allowing you to place orders within the spread.

It is possible to open a position and place orders by time. It is convenient you are not near the computer at the time, or you need to place a couple of orders at the last moment before the news - done with a single click.

It is possible to delete an order or remove position by time.

It is possible to place a grid of orders in different directions and with different lot sizes at the selected step: up to 20.

The TrailingStop, Breakeven values are changed on the chart - there is no need to open the EA settings window.

Closing positions by total positive profit on the account or symbol, the value must be greater than \"0\".

Saves all screenshots of trade operations in the \"Files\" folder.

The panel has been developed for real trading conditions with all error handling.

Recommendations

Before using the program on a live account, study its capabilities on a demo account.

On 4K monitors small buttons, you need to change the system font size.

Features are presented in the video.

", "url": "https://www.mql5.com/it/market/product/24902", "small_icon": "https://c.mql5.com/31/197/easytrades-logo-60x60-2554.png", "middle_icon": "https://c.mql5.com/31/440/easytrades-logo-140x140-7706.png", "icon": "https://c.mql5.com/31/197/easytrades-logo-200x200-7255.png", "rating": 1, "price": 35, "published": 1504113908, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 24915, "title": "PowerSignalMT5", "description": "

PowerSignal is a complete trading system based on the ATR technical indicator. This indicator will record the current status of each POWERTREND in every time frame and currency pair analyzed. The PowerSignal creates a trend strength and entry point signal list display by evaluating these data. If there is a full coincidence on any pair an alert will pop up indicating such case. List data includes Symbol, M5-MN1, BuyPercent, SellPercent, LastEntry. The LastEntry shows entry points (periods, price, time). When the trend intensity is greater than 75%, it is considered to be a strong currency pair.

Inputs Value

Periods = 14 - indicator period.
Text color = White - Normal text color.
Buy Signal color = LawnGreen - Long signal color.
Sell signal color = OrangeRed - Short signal color.
Alert_ON = false - Disable Alarm. true - Enable Alarm: support Alert, Email, push.
Alert_Min_Interval = 15
Entry_Percent = PERCENT_100 - Trend percentage requirements PERCENT_100 or more.
Wait_Mins_For_Next_Signal = 30 - Wait for the next time of signal.

Author

Daying Cao, an experienced software engineer.

", "url": "https://www.mql5.com/it/market/product/24915", "small_icon": "https://c.mql5.com/31/197/powersignalmt5-logo-60x60-2675.png", "middle_icon": "https://c.mql5.com/31/445/powersignalmt5-logo-140x140-1219.png", "icon": "https://c.mql5.com/31/197/powersignalmt5-logo-200x200-5265.png", "rating": 0, "price": 30, "published": 1503590519, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24975, "title": "Gekko RSI Plus", "description": "

This is Gekko's Cutomized Relative Strength Index (RSI), a customized version of the famous RSI indicator. Use the regular RSI and take advantage two entry signals calculations and different ways of being alerted whenever there is potential entry or exit point.

\r\n

Inputs

\r\n

Period: Period for the RSI calculation;
How will the indicator calculate entry (swing) signals:

1- Produces Exit Signals for Swings based on RSI entering and leaving Upper and Lower Levels Zones;
2- Produces Entry/Exit Signals for Swings based on RSI crossing up or down the middle line (50);

Plays a sound when there is a swing: set it as true and it will play a sound on the Metatrader Terminal every time there's a swing on the trend, indicating entry or exit points.
Write Logs On Terminal Window: set it as true if you want the indicator to write logs on the Terminal's Experts tab for signal swings;
Send Mobile Push Notifications: set it as true if you desire to receive Push Notification on the MetaTrader app on your mobile for signal swings;
Send E-Mail Alerts: set it as true if you desire to receive e-mail alerts at the e-mail address configured on the terminal for signal swings;

\r\n

Good Trades!

\r\n

Donate part of your profit to good causes and humanitarian entities of your choice, \"Money only comes if there's a purpose for you to earn it\".

", "url": "https://www.mql5.com/it/market/product/24975", "small_icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-60x60-9176.png", "middle_icon": "https://c.mql5.com/31/439/gekko-rsi-plus-logo-140x140-6419.png", "icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-200x200-8804.png", "rating": 0, "price": 50, "published": 1504110413, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25034, "title": "KVM Bitcoin Price Ticker Pro MT5", "description": "

A ticker that shows the average bitcoin price of the selected currency and keeps updating it at regular intervals.

\r\n

PRO version updates more often and displays details about the price change!

\r\n

Make sure you have added the API address http://metakod.com/mk/api in the list of allowed URLs on tab Tools → Options → Expert Advisors.

\r\n

All of the supported currencies and the API address are listed in the screenshots below.

\r\n\r\n

\r\n

Inputs

\r\n

Logging level - Controls the amount of details written to the log (default: INFO).
BTC (Bitcoin) to - Specifies the name of the selected currency (default: USD).
Label X position - X position of the top left point of the label relative to the chart corner (default: 5).
Label Y position - Y position of the top left point of the label relative to the chart corner (default: 20).

\r\n

Any comments or suggestions would be greatly appreciated!

", "url": "https://www.mql5.com/it/market/product/25034", "small_icon": "https://c.mql5.com/31/198/kvm-bitcoin-price-ticker-pro-mt5-logo-60x60-2501.png", "middle_icon": "https://c.mql5.com/31/440/kvm-bitcoin-price-ticker-pro-mt5-logo-140x140-5914.png", "icon": "https://c.mql5.com/31/198/kvm-bitcoin-price-ticker-pro-mt5-logo-200x200-6397.png", "rating": 0, "price": 30, "published": 1505321226, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 25039, "title": "AIS Simple Linear Smoothing MT5", "description": "

Questo indicatore implementa un semplice processo di smoothing lineare.

Uno degli svantaggi del livellamento esponenziale è il rapido decadimento del segnale. Ciò rende impossibile tracciare completamente le tendenze a lungo termine nella fascia di prezzo. Il livellamento lineare consente di ottimizzare il filtraggio del segnale in modo più accurato e preciso.

L'indicatore si configura selezionando i parametri:

LP: questo parametro consente di selezionare il periodo di livellamento. Maggiore è il suo valore, più le tendenze a lungo termine vengono visualizzate dall'indicatore. Il valore valido è 0 - 255.

SP: questo parametro influisce sulla sensibilità dell'indicatore. Maggiore è questo parametro, maggiore è l'influenza degli ultimi valori della serie di prezzi. Se il valore di questo parametro è zero, l'indicatore visualizza una media mobile semplice con un periodo pari a LP+1. Il valore valido è 0 - 255.

", "url": "https://www.mql5.com/it/market/product/25039", "small_icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-60x60-8622.png", "middle_icon": "https://c.mql5.com/31/441/ais-simple-linear-smoothing-mt5-logo-140x140-1689.png", "icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-200x200-5146.png", "rating": 0, "price": 30, "published": 1505321258, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25068, "title": "Gekko ADX Plus", "description": "

This is Gekko's Cutomized Cutomized Average Directional Index (ADX), a customized version of the famous ADX indicator. Use the regular ADX and take advantage two entry signals calculations and different ways of being alerted whenever there is potential entry or exit point.

\r\n

Inputs

\r\n

Period: Period for the ADX calculation;
PlotSignalType: How will the indicator calculate entry (swing) signals:

1- ShowSwingsOnTrendLevel: Show Signals for Trend Confirmation Swings;
2- ShowSwingsOnTrendLevelDirection: Shows Signals for Trend Confirmation Swings Plus Entry Direction (Long or Short);
3- ShowSwingsOnPosAndNegDI: Shows Entry/Exit (Long or Short) Signals based on DI+ and DI- crossing plus Trend confirmation;

Trend Level: The level used for confirming a Trend formation.
Plays a sound when there is a swing: set it as true and it will play a sound on the Metatrader Terminal every time there's a swing on the trend, indicating entry or exit points.
Write Logs On Terminal Window: set it as true if you want the indicator to write logs on the Terminal's Experts tab for signal swings;
Send Mobile Push Notifications: set it as true if you desire to receive Push Notification on the MetaTrader app on your mobile for signal swings;
Send E-Mail Alerts: set it as true if you desire to receive e-mail alerts at the e-mail address configured on the terminal for signal swings;

\r\n

Good Trades!

\r\n

Donate part of your profit to good causes and humanitarian entities of your choice, \"Money only comes if there's a purpose for you to earn it\" .

", "url": "https://www.mql5.com/it/market/product/25068", "small_icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-60x60-2270.png", "middle_icon": "https://c.mql5.com/31/446/gekko-adx-plus-logo-140x140-4687.png", "icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-200x200-6043.png", "rating": 0, "price": 50, "published": 1504110418, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25123, "title": "Mr Big MT5", "description": "

The indicator shows and highlights the chart candles, which are formed as a result of large players entering the market in large volumes. Such candles can also be formed after achieving a certainty on the market, when most of the participants hold positions in the same direction. The movement is likely to continue in that direction after such candles.

\r\n

The indicator highlights the significant candles from the existing ones on the chart;
The indicator allows identifying the trends based on candles, in which the positions towards the main tendency are strengthened;
It is possible to filter signals (candles) by volatility, and to display only the ones that are greater than the specified number of points. (this parameter can be the same for all time frames or different for each time frame);
It is possible to filter according to the following principle: display only the candles that break a certain level of the price it is based on (calculated mathematically), or ignore this condition;
It is possible to filter the display of signals by time, or ignore this condition (terminal time on the chart);
The indicator can be used on any timeframe, on any instrument;
It can be used for long-term and medium-term trading or scalping.

\r\n\r\n

\r\n

Settings

\r\n

Period_Candle - calculation period for signal search;
Confirmation_Level - if set to true, the signal must break a certain price level it is based on; if false, the condition is ignored;
Type_Arrows - type of arrows;
Min_Candle_Pips_Common - filter of the signal's (candle) volatility in points, (signals smaller than the values specified in the Min_Candle_Pips_ variables will not be displayed):\r\n
- If set to true, then a value from the Min_Candle_Pips_Common_ALL_TF variable is used as a filter, common for all timeframes;
- If false, then separate values from the Min_Candle_Pips_XX variables are used for each timeframe.
\r\n
Min_Candle_Pips_Common_ALL_TF - signal size in points, common for all timeframes;
Min_Candle_Pips_M1 - signal size in points, used for the M1 timeframe;
Min_Candle_Pips_M2 - signal size in points, used for the M2 timeframe;
Min_Candle_Pips_M3 - signal size in points, used for the M3 timeframe;
Min_Candle_Pips_M4 - signal size in points, used for the M4 timeframe;
Min_Candle_Pips_M5 - signal size in points, used for the M5 timeframe;
Min_Candle_Pips_M6 - signal size in points, used for the M6 timeframe;
Min_Candle_Pips_M10 - signal size in points, used for the M10 timeframe;
Min_Candle_Pips_M12 - signal size in points, used for the M12 timeframe;
Min_Candle_Pips_M15 - signal size in points, used for the M15 timeframe;
Min_Candle_Pips_M20 - signal size in points, used for the M20 timeframe;
Min_Candle_Pips_M30 - signal size in points, used for the M30 timeframe;
Min_Candle_Pips_H1 - signal size in points, used for the H1 timeframe;
Min_Candle_Pips_H2 - signal size in points, used for the H2 timeframe;
Min_Candle_Pips_H3 - signal size in points, used for the H3 timeframe;
Min_Candle_Pips_H4 - signal size in points, used for the H4 timeframe;
Min_Candle_Pips_H6 - signal size in points, used for the H6 timeframe;
Min_Candle_Pips_H8 - signal size in points, used for the H8 timeframe;
Min_Candle_Pips_H12 - signal size in points, used for the H12 timeframe;
Min_Candle_Pips_D1 - signal size in points, used for the D1 timeframe;
Min_Candle_Pips_W1 - signal size in points, used for the W1 timeframe;
Min_Candle_Pips_MN1 - signal size in points, used for the MN1 timeframe;
Time_Filter - filter display of the signals by time;
Start_Signal_Hour - hour to start displaying the signals (terminal time on the chart);
Start_Signal_Minute - minute to start displaying the signals (terminal time on the chart);
End_Signal_Hour - hour to stop displaying the signals (terminal time on the chart);
End_Signal_Minute - minute to stop displaying the signals (terminal time on the chart).

", "url": "https://www.mql5.com/it/market/product/25123", "small_icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-60x60-8017.png", "middle_icon": "https://c.mql5.com/31/438/mr-big-mt5-logo-140x140-3816.png", "icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-200x200-6528.png", "rating": 0, "price": 99, "published": 1504691933, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25134, "title": "Gekko Parabolic SAR Plus", "description": "

Type: Trend

\r\n

This is Gekko's Customized Parabolic SAR, a customized version of the famous Parabolic SAR indicator. Use the regular SAR and take advantage of different ways of being alerted whenever there is potential entry or exit point.

\r\n

Inputs

\r\n

Step: Acceleration Factor (AF), default is 0.02. It means it increases by 0.02 each time the extreme point makes a new high or low. AF can reach a maximum of \"x\" based on the second parameter below, no matter how long the trend extends;
Maximum: Extreme Point (EP): The highest high or lowest low of the current trend. Default is 0.2;
Plays a sound when there is a swing: set it as true and it will play a sound on the MetaTrader Terminal every time there's a swing on the trend, indicating entry or exit points.
Write Logs On Terminal Window: set it as true if you want the indicator to write logs on the Terminal's Experts tab for signal swings;
Send Mobile Push Notifications: set it as true if you desire to receive Push Notification on the MetaTrader app on your mobile for signal swings;
Send E-Mail Alerts: set it as true if you desire to receive e-mail alerts at the e-mail address configured on the terminal for signal swings;

\r\n

Good Trades!

\r\n

Donate part of your profit to good causes and humanitarian entities of your choice, \"Money only comes if there's a purpose for you to earn it\".

", "url": "https://www.mql5.com/it/market/product/25134", "small_icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-60x60-2863.png", "middle_icon": "https://c.mql5.com/31/438/gekko-parabolic-sar-plus-logo-140x140-1972.png", "icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-200x200-3962.png", "rating": 5, "price": 50, "published": 1504284380, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25170, "title": "Virtual Orders Charting", "description": "

What does it do?

\r\n

It assists you in your trading and has some important jobs to perform:

\r\n

It sets virtual pending orders, stop loss and take profit.
It can set real stop loss and take profit if desired.
It makes trading independent of bid-ask line concept, thus useful for very short term traders and price action traders.
Orders can be opened, managed and closed with 1 click providing fastest management.
It can automatically set your position sizing based on your risk inputs.
Graphical panel enables inserting new inputs in few seconds.

\r\n\r\n

\r\n

What it does not do?

\r\n

These are also future features that are to be added

\r\n

It does not set real pending orders, thus order is executed through your computer (EA).
It cannot be used for backtest in strategy tester.
It does not automatically move the lines/levels.

\r\n\r\n

\r\n

Instructions

\r\n

These are the main inputs of the EA:

\r\n

\r\n
RiskType: Can be either in fixed lots or you can have a fixed money risk. Can also be a in terms of percentage of account balance for risk controllers.
\r\n
- FixedLots
- FixedMoney
- Percentage
\r\n
Risk: If risk type is set to fixed lots then enter lot number, if it is fixed money then type the risk in money while percentage risk needs to be written the percentage number.
StopLoss: Initial stop loss when virtual order is placed on chart.
TakeProfit: Initial take profit when virtual order is placed on chart.
Set real SL/TP after trade open: If true then after trade is opened, EA will automatically set real stop loss and take profit. This is a useful feature if you need to record your analytics through 3rd party software or if need to close the platform.
Include fees: If set true then spread and commission is calculated and position size is reduced such that when trade is closed you will lose the absolute value you risked.
Broker commission Round Turn: Each broker has different Round Turn commission, ask broker for these details. Set Zero if there is no commission.

\r\n

You can also change line colors, width and style but initial ones are set to match real orders characteristics. There is a small button at middle top of the chart, you need to press it so that graphical panel can open, press it again and it will close.

\r\n

If you press on buy and click on chart, EA will place your order at that location. Same goes for sell order. EA uses market orders to open orders i.e when price will cross the order level by 1 point then the order shall be executed, same goes for stop loss and take profit.

\r\n

Also, EA does not care about bid-ask line. When EA closes the order on stop loss or take profit, it will only care about what the actual price of market is, bid price is ignored and only ask line is considered.

\r\n

Fee structure can be calculated if set true, spread and commissions will however reduce the position size so that you only lose the absolute value you risked. If your account has commissions then ask your broker for round turn commission for 1 Lot and enter that value in the input.

\r\n

EA can also set real take profit and stop loss after order is opened so that if you shut down the platform or need to record your statistics through a 3rd party software, it can be done. Option can be disabled if not need. Take profit also shows what is your risk:reward ratio so that you can keep track of risk management.

\r\n

An important passive function is that you can double click the line and fix your levels. If you fix your stop loss at a certain price level and your risk is set to a certain amount or percentage, then no matter where you place your entry order, your risk will remain the same as EA will automatically size your position.

\r\n

Please note: When order is opened, do not take stop loss line above/below price level. If you place a sell order and it is opened by EA, then do not take stop loss below price, otherwise EA will close that order regardless of whether it hit the level or not. Same goes for take profit, do not take it above (in case of sell order) or below (in case of buy order), otherwise EA will close that order.

\r\n

Feedback and suggestions are welcomed, EA will keep updating in the future so stay tuned!

\r\n

", "url": "https://www.mql5.com/it/market/product/25170", "small_icon": "https://c.mql5.com/31/202/mt5-virtual-orders-charting-logo-60x60-3411.png", "middle_icon": "https://c.mql5.com/31/445/virtual-orders-charting-logo-140x140-8954.png", "icon": "https://c.mql5.com/31/202/mt5-virtual-orders-charting-logo-200x200-7496.png", "rating": 0, "price": 199, "published": 1507112908, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 25186, "title": "Break Day Range", "description": "

A signal indicator. It implements the tactics described in Larry Williams' book \"Long-Term Secrets to Short-Term Trading\", Chapter 4, \"Volatility Breakouts - The Momentum Breakthrough\". The indicator displays entry points on the chart using arrows. Input parameters are not used.

\r\n

Example of use in a working trading system

\r\n

It is used on a live account as part of the portfolio of strategies on the GMKN futures. Signal monitoring: https://www.mql5.com/en/signals/204344. Screenshots were created based on the monitoring data.

\r\n

MetaTrader 5 does not provide generation of reports on one or selected symbols, therefore, the information on the trading results was displayed using the tools described in https://www.mql5.com/en/articles/244. The profitreport.mq5 script was slightly modified to filter deals on the GMKN futures. Trading was performed using one contract.

", "url": "https://www.mql5.com/it/market/product/25186", "small_icon": "https://c.mql5.com/31/200/break-day-range-logo-60x60-5514.png", "middle_icon": "https://c.mql5.com/31/440/break-day-range-logo-140x140-9069.png", "icon": "https://c.mql5.com/31/200/break-day-range-logo-200x200-7957.png", "rating": 0, "price": 59, "published": 1504698999, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25229, "title": "PairsTrading MT5", "description": "

The EA identifies divergences in two correlated currency pairs and trades in the direction where they converge back.

Working timeframe: M30

Input parameters

MagicNumber - identification number for the EA.
OrdersComment - comment to order, automatic if an empty value is set.
Lots - lot size.
DepoPer001Lot - automatic lot calculation (specify the balance per 0.01 lot) (if 0, the value from 'Lots' parameter is used).
TimeFrame - working timeframe.
Symbol #2 - correlated currency.
Symbol #2 reverse - currency #2 with a reverse correlation to the current.
Symbol #2 lot - lot of currency #2, automatic if a zero value is set.
TradeType - drop-down list for selecting the trade direction:
- +Sell/Buy | -Buy/Sell - standard, for pairs with direct correlation.
- +Sell/Sell | -Buy/Buy - pairs with inverse correlation require this or the next value.
- +Buy/Buy | -Sell/Sell - pairs with inverse correlation require this or the previous value.
Min Correlation - minimum divergence for opening orders, in the range of 0.1 - 0.5.
MA Period (corr) - number of candles to calculate the average correlation
MA Level (corr) - How many times does the correlation have to be higher than the average to search for a signal
Open signal shift - offset of the signal to open. If set to \"0\", the current incomplete bar; if \"1\", the previous closed bar, etc.
Close signal shift - offset of the signal to close. If set to \"0\", the current incomplete bar; if \"1\", the previous closed bar, etc.
Min dist reopen (pips) - step in points for opening additional orders in case of a repeated signal.
Max spread - the maximum spread for opening new orders.
Hour start - hour to start searching for the entry signals.
Minute start - minute to start searching for the entry signals.
Hour end - hour to stop searching for the entry signals.
Minute end - minute to stop searching for the entry signals.
Close only in profit ($/lot) - profit value, at which closing orders is allowed.
Exit minutes - time for closing a trade, in case there were no other signals to close.
Profit time exit ($/lot) - profit value, at which closing orders by time is allowed.
Trail start ($/lot) - the number of points to start the trailing stop by equity.
Trail stop ($/lot) - trailing distance.
Stop loss ($/lot) - stop loss in currency.
Take profit ($/lot) - take profit in currency.

The value of parameters specified with ($/lot) are multiplied by the lot, so as not to change them as the lot size increases. Thus, if a parameter value is 1000 and lot is 0.1, position will be closed upon reaching a profit of >= $10.

The EA should be attached to one currency only, there is no need to attach the EA to the currency specified in Symbol #2.

", "url": "https://www.mql5.com/it/market/product/25229", "small_icon": "https://c.mql5.com/31/200/pairstrading-mt5-logo-60x60-9490.png", "middle_icon": "https://c.mql5.com/31/438/pairstrading-mt5-logo-140x140-5432.png", "icon": "https://c.mql5.com/31/200/pairstrading-mt5-logo-200x200-7444.png", "rating": 0, "price": 100, "published": 1505148471, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25232, "title": "Spadim Order Beep Email Notification", "description": "

This indicator sends a message (notification), an email, and plays a custom sound when a Limit (Buy/Sell) or Limit Stop (Buy/Sell) or Take Profit, Stop Loss, Stop Out is executed.

\r\n

A user can change the sound file name, and select if they receive notifications/emails.

\r\n

It runs as an indicator, and only one indicator is locked (used) by a user account/login.

\r\n

Parameters

\r\n

soundFile - sound file
Save your file at the terminal folder, for example: \"C:\\Program Files\\MetaTrader 5\\Sounds\\Order Executed.wav\".
From: https://www.mql5.com/en/docs/common/playsound
\"The file must be located in terminal_directory\\Sounds or its sub-directory. Only WAV files are played.\"
sendEmail - send an email
sendNotification - send a notification (mobile)
outputPrint - print to console
writeToFile - output transactions (verbose) and trades (non verbose) to a file, or do not use the file (TXT file saved at the Common folder)

", "url": "https://www.mql5.com/it/market/product/25232", "small_icon": "https://c.mql5.com/31/200/spadim-order-beep-email-notification-logo-60x60-7631.png", "middle_icon": "https://c.mql5.com/31/445/spadim-order-beep-email-notification-logo-140x140-2739.png", "icon": "https://c.mql5.com/31/200/spadim-order-beep-email-notification-logo-200x200-8605.png", "rating": 0, "price": 30, "published": 1505465248, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 25267, "title": "Predicting Donchian Channel MT5", "description": "

The Predicting Donchian Channel MT5 indicator allows predicting the future changes in the levels of the Donchian channel based on the channel position of the price.

\r\n

The standard ZigZag indicator starts drawing its ray in 99% of the time the opposite Donchian channel is touched.

\r\n

The forecast of the channel boundary levels will help in finding the points, where the correction ends or the trend changes, an also to estimate how soon those events can occur.

\r\n

Configurations

\r\n

Period - Donchian channel calculation period. Recommended values are from 12 to 240.

", "url": "https://www.mql5.com/it/market/product/25267", "small_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-60x60-6557.png", "middle_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-140x140-3966.png", "icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-200x200-1044.png", "rating": 0, "price": 30, "published": 1505204869, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25278, "title": "PreMarket Calculations", "description": "

The indicator displays useful trading information on the chart for futures contracts such as:

\r\n

Average daily volatility with adjustable period of time.
Optimal volume to trade depending on percentage of account balance you use. The percentage can be adjusted.
Optimal stop loss depending on your maximum risk per trade considering percentage of account balance you use.
Initial margin for the contract.
Tick value for the contract.

\r\n

The indicator has an ability to display dynamic daily volatility levels on the chart.

\r\n

Parameters

\r\n

Text Color – color of text information displayed on the chart
Font Size – size of text information displayed on the chart
Days, Average daily volatility is calculated over
Percentage of account balance to use to calculate volume
Stop-Loss percentage – maximum risk per trade
Display average daily volatility levels on the chart – on/off
Color of volatility levels
Display contract information: Initial Margin, Tick Value – on/off

", "url": "https://www.mql5.com/it/market/product/25278", "small_icon": "https://c.mql5.com/31/201/premarket-calculations-logo-60x60-6601.png", "middle_icon": "https://c.mql5.com/31/440/premarket-calculations-logo-140x140-5913.png", "icon": "https://c.mql5.com/31/201/premarket-calculations-logo-200x200-4577.png", "rating": 0, "price": 30, "published": 1504889940, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 25318, "title": "Exclusive Bollinger MT5", "description": "

Exclusive Bollinger is a professional indicator based on the popular Bollinger Bands indicator and provided with an advanced algorithm.

Unlike the standard Bollinger, my Exclusive Bollinger provides better signals and is equipped with flexible settings allowing traders to adjust this indicator to their trading style. In the indicator, you can set up alerts (alert, email, push), so that you won't miss a single trading signal.

Exclusive Bollinger for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24336

Advantages of the indicator

Perfect for scalping.
Generates minimum false signals.
Suitable for beginners and experienced traders.
Works on all timeframes.
Works on any financial instruments: FOREX, CFD, binary options.
Does not redraw.
Sending signals to email and mobile devices.

Recommended symbols

EURGBP, GBPJPY, AUDNZD, EURCHF, EURUSD.

Recommendations on usage

Sell when the price crosses the upper line of the indicator (see screenshot 1, entry points are encircled).

Buy when the price crosses the lower line of the indicator.

The indicator is best suited for intraday trading, on the timeframe from M1 to H1.

Parameters

Period - the key parameter responsible for the averaging period for calculating the indicator.
Deviation - the number of standard deviations from the main line.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email enable/disable sending e-mails. If true - enabled, false - disabled.
Push enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.
Type of signal - the setting is responsible for the signal to be sent by Alert, Email and Push. Type of signal can be equal to current bar (sending an alert when signal appears on the current bar) or last bar(when a signal occurred on the past bar).
clrUPPER - the color of the upper indicator line.
clrLOWER - the color of the lower indicator line.
clrAVERAGE - the color of the middle line of the indicator.
Width - line width.

", "url": "https://www.mql5.com/it/market/product/25318", "small_icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-60x60-3291.png", "middle_icon": "https://c.mql5.com/31/445/exclusive-bollinger-mt5-logo-140x140-1927.png", "icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-200x200-9546.png", "rating": 2.6666667, "price": 36, "published": 1505217661, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 25324, "title": "Moriarty MT5", "description": "

Moriarty is fully automatic advisor based on Scalping, but also uses Martingale strategy. This advisor does not depend on timeframes and uses heuristic algorithms for opening/closing orders. It can work on several currency pairs simultaneously.

The best results were achieved on the Hedged accounts.

\r\n

Usage

Run the advisor on a chart.

Parameters Moriarty

Take profit in pips:	minimal number of pips that is required to close order with profit
Lots:	size of lot
Step:	martingale step
Martingale:	multiplier for martingale
Magic:	the magic value to distinguish Moriarty orders from others
TakeCareAllOrders:	If true, adviser handles all positions at the chart, that have been opened before initialization stage. It may be useful to close manually opened positions. If false, Moriarty takes care of positions that is opened with appropriate Magic value (e.t. opened by itself).

Selection of input parameters

It's recommended to find the best parameters on historical data using tester for each currency you would like to try. Correct these parameters from time to time.

There are test examples of using parameter values that successfully works for a half a year with approximate profit 25% per month.

EURUSD (investment 50 USD, cent account, use hedge, leverage 1:500)

Take profit in pips: 100

Lots: 0.05

Step: 750

Martingale: 2

GBPUSD (investment 50 USD, cent account, use hedge, leverage 1:500)

Take profit in pips: 100

Lots: 0.1

Step: 800

Martingale: 2

EURCAD (investment 50 USD, cent account, use hedge, leverage 1:500)

Take profit in pips: 50

Lots: 0.2

Step: 500

Martingale: 2

\r\n

", "url": "https://www.mql5.com/it/market/product/25324", "small_icon": "https://c.mql5.com/31/302/moriarty-5-logo-60x60-1589.png", "middle_icon": "https://c.mql5.com/31/445/moriarty-mt5-logo-140x140-2189.png", "icon": "https://c.mql5.com/31/302/moriarty-5-logo-200x200-7452.png", "rating": 0, "price": 50, "published": 1548878525, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25347, "title": "Riona", "description": "

Riona is an Expert Advisor (EA) that build based on martingale and hedging method.

The main idea is place buy and sell in parallel and virtually, save the unprofitable positions with martingale, and keep the profit during trade with hedging.

So, the account that used to trade, must support to take multiple order.

The highest and lowest prices based NumCandle value that taken, are to indicate the range of new orders. Where the next order, with same type must be higher than 75% of difference between this lowest and highest prices.

This EA is not accompanied by any exit scenario, so you may close it by your self, when you want to stop this EA.

And you can also use this EA in another pairs or window at same time, certainly with different magic number.

Pairs and timeframes

This EA is recommended for use on EURUSD at M1 timeframes, with 10000 of initial balance, and lot=0.2.

Parameters

MagicNumber - the mark number used to identify orders, which are sent and managed by this EA. If this EA runs on multiple pairs, every pair must be run with different magic number, for example: GBPUSD - 100001, EURUSD - 200002, XAUUSD - 300003, etc.
NumCandle - the number of candles that used for calculate highest and lowest prices. For example NumCandle = 60 at M1 timeframes, its mean the range of order to new order depend on the highest and lowest price of candle one hour before. If its set to 0, then the default value of this parameter will be taken to 60, 36, 12, 6, 3, and 1 candles for M1, M5, M15, M30, H1, and else respectively.
MaxMartingale - the maximum Martingale order. Default value is , i.e. the maximum Martingale multiplier is 2 ⁷=128. So for virtual order, back calculations will use the maximum Martingale until multiplier 128. It will affect the decision of lot value of real next order to be sent.
CloseAtStop - the option to close or not all orders at Remove EA action. Only remove orders that have magic number that specified by MagicNumber parameter above.
OrderLots - initial lots value used for the initial orders. For example: OrderLots = 0.1, 0.2, 0.4, 0.8, etc.
SlipPage - slippage value that used for every new order request.

Authors

", "url": "https://www.mql5.com/it/market/product/25347", "small_icon": "https://c.mql5.com/31/395/riona-logo-60x60-4926.png", "middle_icon": "https://c.mql5.com/31/446/riona-logo-140x140-7124.png", "icon": "https://c.mql5.com/31/395/riona-logo-200x200-3500.png", "rating": 0, "price": 0, "published": 1580539417, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25433, "title": "Splash MT5", "description": "

The indicator identifies the most suitable moment for entering the market in terms of market volatility, when the market has the strength to move (the signal is indicated by an arrow under the candle).

For each of the signals, the presence of trends on the current and higher timeframes is determined, so that the signal is in the direction of the majority of positions opened on the market (denoted near the signal by abbreviations of timeframes with a trend present).

The signal appears after the candle is closed.

To set the Take Profit level or to exit at the market price, the indicator determines 3 targets (\"ONE\", \"TWO\", \"THREE\" labels on the chart). By default. these are the Fibonacci levels: 1.618, 2.618, 4.236; custom values can be specified in the setting.

Stop Loss can be set near the arrow or at your discretion (remember that the tighter the stop loss, the more often it triggers).

Splash can be used as a standalone trading system, as well as in conjunction with other methods, indicators, systems.
The indicator can be used on any timeframe, on the stock, commodity and currency markets;
It can be used for long-term, medium-term and short-term trading.

Settings

History_Size - the amount of history for calculation.
Period_Candle - calculation period for signal search.
Mult_RS - volatility ratio.
Type_Arrows - type of arrows.
Target - display the targets.
Target_ONE - the first target value.
Target_TWO - the second target value.
Target_THREE - the third target value.
Target_Up - color of up target labels.
Target_Down - color of down target labels.
Trend - display the trend labels.
MA_Period - period of the moving average for determining trends.
MA_type - type of the moving average for determining trends.
MA_price - price type used in calculation of the moving average.
Trend_Text_Up - color of the trend labels for up signals.
Trend_Text_Down - color of the trend labels for down signals.
Trend_Text_FONTSIZE - font size of the trend labels.
VHT - display the trend labels vertically / horizontally / diagonally.
Send_Mail - email notification.
Send_Notification - notification to mobile terminal.
Send_Alert - standard terminal alert.

", "url": "https://www.mql5.com/it/market/product/25433", "small_icon": "https://c.mql5.com/31/202/splash-mt5-logo-60x60-2761.png", "middle_icon": "https://c.mql5.com/31/447/splash-mt5-logo-140x140-7258.png", "icon": "https://c.mql5.com/31/202/splash-mt5-logo-200x200-3799.png", "rating": 0, "price": 199, "published": 1506353582, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25472, "title": "Trend Cruiser GT for CADCHF", "description": "

The Trend CruiserGT (for CAD/CHF)

\r\n

It is a swing trading system that trades on CAD/CHF currency pair on 4-hrly chart.
The EA is custom designed to take advantage of the start of rising Canadian dollar in 2017, after seeing over 7 year period of downtrend against the Swiss Franc (CHF).
The design of the EA have taken consideration of fundamental analysis over last several quarters for the CAD and CHF counterparts, and analyzing the multi-year chart pattern of this pair.
The strategy will take full advantage of the rising strength of the CAD/CHF that is expected to last through 2020.

\r\n

HOW IT WORKS

\r\n

Trend CruiserGT trades only the buys (long-only trades) and scans for the uptrend movement using a series of Bollinger Bands for entry and exits.
The strength of the EA is the simplicity. It trades on 4-hourly chart and the trades can last for 1 to 3 days on average. It places 3 high probability trades per month.
The author has built and developed the strategy using 10/20/30 Rule™ he has created. He has written trading books on this quantitative technique which are available on Amazon.
The 10/20/30 Rule is a powerful technique to build trading strategies that produce winning results. The coding of the Trend CruiserGT is created by Dennis Nikolopoulos who has many years experience in developing and testing systems that are bug free and error prone.

\r\n

WHAT IS THE STRENGTH

\r\n

This is a risk-averse strategy which means that the strategy has relatively low drawdown to protect the clients' capital from highly volatile period.
The strategy is also tuned to produce nice returns with lower risk which is crucial but extremely rare to find. Also, the strategy has been tested and verified with robust backtesting and forward testing using the author's unique 10/20/30 Rule and have the edge of many systems out there.

\r\n

RECOMMENDATION

\r\n

This is not scalping, so the EA will work very well with all regulated forex brokers.
This is a plug & play system, so no new parameters setting will be needed. It is better to let the system run with default settings for optimum performance.

\r\n

MONEY MANAGEMENT

\r\n

There are 3 levels; Conservative, Smart and Aggressive, of money management rules for different types of traders.
Default is at \"Smart\" for people who are focused to keep very low drawdown and maximize gain.
Aggressive setting has still maintain a relatively low drawdown, and have a more growth potential.

\r\n

PARAMETER SETTINGS

\r\n

The system has been optimized to run best with the default parameter settings and users are not required to change them.
Money management selection is recommended to be selected per the user's risk preference.
The strategy places the stop-loss level according to price action and there is a universal stop loss (percentage) that is set to 4% to protect against flash crash or sudden drop in price for whatever reason.
There are 3 Bollinger Band settings which are optimized and doesn't need to change.

\r\n

Parameters

\r\n

Maximum number of Orders. Set to 3 (default). This is to have the maximum trade orders opened at any time.
Stop-Loss (Percentage). All orders have stop-loss. This is an extra layer of stop-loss for sudden price drop on rare events. Set at 4% of the open price.
Money Management Rules. 3 settings according to risk appetite: Conservative (3% risk), Smart (4.4%) and Aggressive (5.8%)
Bollinger Band Blue. 20p, 1.9dev settings for Entry order and Stop-loss trigger - no changes required
Bollinger Band Green. 18p, 2.8dev settings for Take-profit setting - no changes required
Bollinger Band Red. 22p, 2.3dev, shift -2 settings for Take-profit setting. Green and Red Bollinger Band must intersect to set take-profit- no changes required
RSI Strategy Period = 28 - period interval for RSI calculation - no changes required
RSI Strategy Level = 36 - trigger level - no changes required
Enable Panel - True is visible, False is green panel on screen is removed
Enable Rule 1 - True (optimized take profit level)
Enable Rule 2 SL - True enable optimized Stop-loss rule

", "url": "https://www.mql5.com/it/market/product/25472", "small_icon": "https://c.mql5.com/31/203/trend-cruiser-gt-for-cadchf-logo-60x60-8695.png", "middle_icon": "https://c.mql5.com/31/441/trend-cruiser-gt-for-cadchf-logo-140x140-6054.png", "icon": "https://c.mql5.com/31/203/trend-cruiser-gt-for-cadchf-logo-200x200-3856.png", "rating": 0, "price": 255, "published": 1506345767, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25581, "title": "Currency Index Watcher", "description": "

Currency Index Watcher is a simple and user-friendly tool for whoever wish to trade Forex using currencies indexes.

\r\n

Currency Index Watcher is configurable and usable directly from the panel.

\r\n\r\n\r\n

Indexes of 8 custom currencies

\r\n\r\n

\r\n\r\n\r\n

EUR, USD, GBP, JPY, CHF, AUD, CAD, NZD (default)
Any 3-chars symbol from your market watch could be used (BTC = bitcoin, RUB = ruble, CNH = yuan etc ...) : double click the \r\n symbol label
Ability to select which currencies and made-of pairs will be analyzed : check/uncheck wanted symbols in the \r\n calculation
Graphics : there's 2 types of graphics you'll meet there ...

\r\n Selected currencies compared as an histogram:gives an overview of the whole forex market - automatically updated \r\n according to selected currencies
\r\n Specific currencies's historical data over the chosen period:click on the value to display this graphic, by analyzing \r\n the index of the currencies thru time it's possible to make yourself a better opinion on what's upcoming

\r\n

\r\n\r\n\r\n

Currencies Pairs

\r\n\r\n

Selection of opportunities is made according to the following selection criteria:

\r\n\r\n\r\n

\r\n Minimal threshold:minimal difference in points of indexes' variation, the higher it is the more accurate is the signal.
\r\n Search among all currencies or only opened chart
\r\n Period: (W)eeks/(D)ays/(H)ours/(M)inutes, default is set to 24h.
\r\n MA (moving average's period):0=off, to use prices' from a moving average and take benefit from smoothing rather than standard \r\n prices.

\r\n

Heat zone & signals :

\r\n

\r\n\r\n\r\n

\r\n Add in the heat zone :default is set to 5 - when a pair reaches that level of strength (whatever it is bullish or bearish), it is \r\n signaled as being trending
\r\n Remove from the heat zone :default is set to 3 - when a pair falls below that level of strength (whatever it is bullish or bearish), it \r\n is signaled as not being trending anymore
\r\n Clear journal : will clear the journal

\r\n

Currencies pairs are listed according to a color-code (Green/Red) based on the \"heat zone\" values defined by the user :

\r\n

\r\n\r\n\r\n

\r\n Dark color = strong trend
\r\n Normal color = trending
\r\n Light = insignificantly trending

\r\n

Scope : default is set to 5

\r\n

\r\n\r\n\r\n

\r\n The scope is a \"multitimeframe zoom\", a unique feature developed for CIW, since last update values it displays \r\n aren't \r\n no longer strengths, but forces
\r\n A concrete example being more talkative : \"EURUSD, 24h, Scope 5\", it will show EURUSD force on :

the whole last 24 h : strong bull
the last 19 h : bull
the last 14 h : bull
the last 9 h : bear
the last 4 h : strong bear

\r\n\r\n\r\n

\r\n You'll find more examples on the \"Comments tab\".\r\n

\r\n

With such a deep analysis it's possible to \r\neasily anticipate any upcoming consolidation/breakout etc ...

\r\n\r\n\r\n

Customization & friendliness

\r\n\r\n

\r\n\r\n\r\n

Default settings : any change made to CIW is registered, this button will reset the indicator to its default settings
Beep to notify : enable/disable sound notification

\r\n

Currency Index Watcher is timeframe independent and needs to be applied on one only chart but an interval of \r\n>=24h is recommended to rely on this strategy.

\r\n

", "url": "https://www.mql5.com/it/market/product/25581", "small_icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-60x60-3021.png", "middle_icon": "https://c.mql5.com/31/439/currency-index-watcher-logo-140x140-1830.png", "icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-200x200-8320.png", "rating": 0, "price": 0, "published": 1507035758, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25630, "title": "Alpha Trend MT5", "description": "

Alpha Trend MT5 is a trend indicator for the MetaTrader 5 platform; it has been developed by a group of professional traders.

The Alpha Trend MT5 indicator finds the most probable tendency reversal points, which allows making trades at the very beginning of a trend.

This indicator features notifications, which are generated whenever a new signal appears (alert, email, push-notification). This allows you to open a position in a timely manner.

Alpha Trend does not redraw, which makes it possible to evaluate its efficiency on history.

Alpha Trend for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24560

Advantages of the indicator

Suitable for scalping and intraday trading.
Simple and easy indicator configuration.
Works on all timeframes.
It can be used in any financial markets: FOREX, CFD, binary options, stocks.
It can be used as a stand-alone tool or in conjunction with other indicators.

Recommended symbols

EURUSD, GBPUSD, AUDUSD, EURCHF, AUDNZD.

Recommendations on usage

Buy signal: the indicator arrow is directed upwards.

Sell signal: the indicator arrow is directed downwards.

Parameters

Period - the main parameter, responsible for the indicator calculation period.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email - enable/disable sending e-mails. If true - enabled, false - disabled.
Push - enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.

", "url": "https://www.mql5.com/it/market/product/25630", "small_icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-60x60-3346.png", "middle_icon": "https://c.mql5.com/31/445/alpha-trend-mt5-logo-140x140-3048.png", "icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-200x200-7149.png", "rating": 0, "price": 35.9, "published": 1506442578, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25658, "title": "Pm 42", "description": "

A comprehensive tool for determining the levels of support, resistance, reversals in relation to trading sessions. The indicator's thesis can be expressed as follows:

\"Support and resistance levels are undoubtedly formed by the psychological barriers of market participants, and influence the further behavior of the price. But these barriers are different for different groups of traders (One man's meat is another man's poison) and can be grouped by territory or by the trading time\".

Following the thesis, the indicator detects levels and processes data separately for three trading sessions: Asian (including Pacific), European and American.

The User Manual of the indicator is located on the discussion page.

The indicator contains the following subsystems, which can be used either independently or in any combination:

Period Marks: Candles of trading sessions - group and display the data of each trading session in the form of a Japanese candle. Candles can be used for pattern analysis or to visually identify the\r\nsignal source.
Price Marshes: Support and Resistance Levels - displays support/resistance levels in the form of a gradient field of horizontal lines, the color of which depends on the trading sessions in which this level occurred. The color density is directly related to the number of confirmations of this level. The periods of the level sources can be selected from the range \"M1\" to \" W1\".
Proximate Missions: Nearest targets - displays the value of the two nearest levels from the top and bottom to the right of the last bar. Levels are filtered by the current trading sessions (levels of inactive trading sessions are not displayed) from the Price Marshes data.
Periods Meters: Timers of trading sessions - displays the status of trading sessions and the time before their start/end.
Predator Mask - controls the display of sessions in the above tools, allowing you to view data only for selected (or excluding selected) trading sessions.

Inputs

The indicator uses the only input parameter Analysis depth (days). Other settings and mode changes are made via the screen interface of\r\nthe indicator.

Analysis depth (days) - depth of analysis in days.

Default settings (they will also be used in the tester): Autotracking\r\nis on; Candles, Marshes, Timers and\r\nTargets are on; Narrow mode; data source timeframe is equal to the chart timeframe.

\r\n\r\n
Trading sessions

The indicator uses the following parameters of trading sessions:

Trading session	Session time (GMT)	Color on the chart
Asian + Pacific	9.00 pm - 9.00 am	Green
European	6.00 am - 4.00 pm	Blue
American	12.00 am - 10.00 pm	Red

The offset of server time is determined automatically.

System messages

Time shift detecting ... - defines the offset of the server time.
[ Symbol ] [ Period ]: history loading ... - additional story is loaded when changing the indicator modes. If this message does not disappear within a reasonable time, reduce the value of the \"Analysis depth (days)\" input parameter.
Session candels for [Period] period are not provided - impossible to build candles on the selected period of the chart.
Untrusted price area! - prices are unknown: the price is near the boundaries of the analyzed range. Indications unreliable.

", "url": "https://www.mql5.com/it/market/product/25658", "small_icon": "https://c.mql5.com/31/207/pm-42-logo-60x60-7391.png", "middle_icon": "https://c.mql5.com/31/440/pm-42-logo-140x140-9846.png", "icon": "https://c.mql5.com/31/207/pm-42-logo-200x200-9260.png", "rating": 0, "price": 42, "published": 1509536996, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25659, "title": "TSO Signal Builder MT5", "description": "

TSO Signal Builder MT5 is a MetaTrader 5 Expert Advisor that provides a solid platform to quickly build test and develop automated trading strategies based on indicator signals.

\r\n

Contains 29 indicators, including trend and volume indicators, oscillators as well as many indicators described by Bill Williams.
Basic as well as advanced order management features.
All indicators are configurable and can be combined to create strategies with different entry and exit signals as well as reverse orders.

\r\n

Made for Traders of any Level

\r\n

Every trader can benefit from this expert advisor, from a novice trader learning how to develop a trading strategy to the advanced trader wishing to test complex trading strategies with multiple parameters.

\r\n

Keep us updated to keep you updated

\r\n

We intend to keep updating our products based on your input - give us your feedback in the comments section.

\r\n

Key Inputs

\r\n

(For detailed explanations of all the features of the expert advisor check the Quick Start Guide.)

\r\n

Input Mode

Custom: The EA runs based on the parameters input by the user
Default: The EA ignores all inputs and follows the default parameters that are recommended.
Manual Trades: The EA ignores all inputs and a manual trading panel appears.

Static Balance: The initial balance available.
Stop Loss & Take Profit Units: Pips/Percentage
Stop Loss Value [0 = Disable]
Take Profit Value [0 = Disable]
ENABLE Trailing Stop
Trailing Stop Activation Level
Trailing Stop Distance
ENABLE Parabolic Trailing Stop: A trailing stop based on the parabolic SAR indicator.
Time Filter: The time periods when the EA should not open new positions.
ENABLE Time Stop (Number of Bars) [0 = Disable]: The number of bars at which the initial trade will be closed, irrespective of profit or loss.
Percentage Static Balance to Stop: The net profit at which the EA will stop working.
Initial Lot Size: The lot size of positions opened. It increases if Dynamic Lot Size is enabled (following input). Otherwise, it remains constant for all trades.
ENABLE Dynamic Lot Size:

Equation: The lot size is adjusted based on the equation 𝑋𝑛=𝑎∗𝑋𝑛−1𝑏+𝑐, where 𝑋𝑛 is the lot size for the position to be opened and 𝑋𝑛−1 is the lot size of the last position opened. The lot size remains constant (𝑋𝑛=𝑋𝑛−1) for 𝑎=1,𝑏=1,𝑐=0
Risk Management: The lot size of the initial order is adjusted so that a pre-set percentage of the current balance is always risked based on the stop loss set for the order. A stop loss value must be set for this mechanism to work. This allows for a more dynamic lot size adjustment that increases or decreases proportional to the current balance.
Adjustable: Lot size is set to hold the proportionality ratio of the initial lot size relative to the initial balance.
Disable

Percentage of Risk [ONLY FOR RISK MANAGEMENT]: The percentage of current balance that will be risked if the Risk Management mechanism has been selected.
Adjust Lot Size At Every Balance Change of [ONLY FOR EQUATION]: The amount by which the balance has to increase or decrease for the lot size to be increased or decreased respectively.
𝑎,b,c [ONLY FOR EQUATION]: Parameters for the Dynamic Lot Size Equation.
Entry Signal Settings: The indicator(s) selected in this section will determine the entry strategy followed. It is possible to enable more than one indicators for entry.
ENABLE Exit Signals

Disable: Exit will be based on Basic Order Management (i.e. TP, SL etc.)
Auto: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and wait for the next entry signal.
Reverse: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and at the same time open a new opposite position.
Custom: Only in this case the exit will be based on the indicators and the parameters set in the Exit Signal Settings section. If more than one indicators are enabled, then all indicators must return a signal within the same bar for the EA to close that position.

ENABLE Manual Panel: A panel for manual trades appears.

", "url": "https://www.mql5.com/it/market/product/25659", "small_icon": "https://c.mql5.com/31/205/tso-signal-builder-mt5-logo-60x60-4340.png", "middle_icon": "https://c.mql5.com/31/440/tso-signal-builder-mt5-logo-140x140-5988.png", "icon": "https://c.mql5.com/31/205/tso-signal-builder-mt5-logo-200x200-4554.png", "rating": 0, "price": 49, "published": 1506615407, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25660, "title": "TSO Order Recovery MT5", "description": "

TSO Order Recovery is an expert advisor that provides a known and tested method of covering losses from open positions through hedging.

\r\n

It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies
Add negative management to any strategy (manual or automated) to eliminate losing trades
No pending orders are placed
Any account size - a minimum of $1,000 is recommended
Works on any currency pair
Allows for a lot of customization (a default strategy is included for demonstration purposes)

\r\n

Strategy

\r\n

The Order Recovery system detects a losing trade and opens an opposite position of larger lot size at a fixed distance from the original trade creating a zone within which the loss is confined. This creates two scenarios:

\r\n

If the price reaches the target, the second position will cover the losses of the initial trade or even profit. All positions are then closed with a net profit.
If the price reaches the level of the initial trade an additional position is opened so that there are more lots in total in the original position’s direction, so that the new position together with the initial one will cover the losses of the opposite position and even profit if the price reaches the opposite target. All positions are then closed with a net profit.

\r\n

This process continues and new positions are opened each time the price reverses direction and passes from the edges of the zone, until one of the targets is reached.

\r\n

For Detailed explanations of all the features of the expert advisor check the Quick Start Guide.

\r\n

If for any reason the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. This feature has been added only to cover for unexpected circumstances. This expert advisor can result in open trades that can last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA.

\r\n

Inputs specific to the Order Recovery system

\r\n

(check the Quick Start Guide for detailed explanations)

\r\n

ENABLE Order Recovery
Order Recovery Zone Distance: Distance in pips between the initial and reverse order in pips. It applies for all subsequent orders.
Order Recovery Target Distance: The target pips from the edge of the zone at which the net loss of all open positions is 0. A smaller distance implies a faster exit but is more aggressive as it requires a larger lot size and vice versa.
ENABLE Custom Lots: If this option is disabled, the lot size of the orders opened from the Order Recovery system is based on the selected zone and target distances. If this option is enabled the lots will be determined through the equation 𝑋𝑛=𝑎∗𝑋𝑛−1𝑏+𝑐.
𝑎,b,c: Affect the lot size similar to the dynamic lot size for the initial orders. Used only if Custom Lots are enabled.
ENABLE Safety: If the market does not make a relatively strong price movement, the order recovery mechanism could create multiple open positions, potentially leading to loss of the whole account balance available. This mechanism targets at reducing potential losses.

Close All Positions: All open positions will be closed and the current order recovery cycle will end once a pre-set open loss has been reached.
Reduce Positions: Once a pre-set open loss has been reached, the system will stop opening new positions at the zone edges but the last position will be closed once the opposite edge is reached.
Disable

Open Loss Units:

Percentage: Measure the open loss in the following input as a percentage of the current balance.
Money: Measure the open loss in the following input as money.

Open Loss to Enable Safety: The open loss in percentage of current balance or money (based on above input) at which the Safety mechanism is enabled.
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Managment system
ENABLE Manual Panel: A panel for manual trades appears.
ENABLE Comments:

Account balance
Current profit
Current lots
Max lots
Max drawdown %
Spread

", "url": "https://www.mql5.com/it/market/product/25660", "small_icon": "https://c.mql5.com/31/205/tso-order-recovery-mt5-logo-60x60-5990.png", "middle_icon": "https://c.mql5.com/31/438/tso-order-recovery-mt5-logo-140x140-1397.png", "icon": "https://c.mql5.com/31/205/tso-order-recovery-mt5-logo-200x200-4089.png", "rating": 0, "price": 125, "published": 1506615411, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25662, "title": "TSO Loss Management Lite MT5", "description": "

TSO Loss Management Lite contains all the features of TSO Loss Management except from the Swings mechanism and the other mechanisms based on Swings.

\r\n

Adapts to diverse market conditions and micromanages each trade opened so that the loses are covered as fast as possible but also with minimum risk.
It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies.
Add negative management to any strategy (manual or automated) to eliminate losing trades.
No pending orders are placed.
Risk Management setting allows for any account size - a minimum of $1,000 is recommended.
Works on any currency pair.
Allows for a lot of customization (a default strategy is included for demonstration purposes).

\r\n

Example

\r\n

A trade loses enough to activate the Loss Management system.
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance.
All positions are closed when their net loss is zero (0) or a requested profit target has been reached.

\r\n

For detailed explanations all the features of this expert advisor check the Quick Start Guide.

\r\n

Keep us updated to keep you updated

\r\n

We intend to keep updating our products based on your input - give us your feedback in the comments section.

\r\n

Inputs specific to the Loss Management system

\r\n

Check the Quick Start Guide for detailed explanations.

\r\n

Input Mode

Custom: The EA runs based on the parameters input by the user
Default: The EA ignores all inputs and follows the default parameters that are recommended
Manual Trades: The EA ignores all inputs and a manual trading panel appears

ENABLE Loss Management System
Distance to Activate Loss Management (pips)
Distance Between Loss Management Orders (pips)
ENABLE Dynamic Distances\r\n
- Simple: the lot size is adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
- Smart: orders will be opened at the lines of support / resistance.
- Disable.
\r\n
Order after which Dynamic Distances Start [ONLY FOR EQUATION].
𝑎,𝑏,𝑐 [ONLY FOR EQUATION].
Select no of Bars (Odd Number) [ONLY FOR SMART]: Sets the number of candles required to determine the lines of support / resistance. E.g \"5\" would mean a bar that has a higher HIGH / lower LOW than the two bars before and the two bars after it, creating a peak/trough.
ENABLE Dynamic Lot Size: Lot size adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
Number Of Orders Per Lot Size: The number of orders opened at each change of the lot size.
𝑎,𝑏,𝑐
Lot Size Stabilizer (lots) [0 = Disable]: lot size at which the lots will remain constant.
ENABLE Averaging
Averaging Target Profit (pips): The net profit to be gained after all orders are closed through averaging.
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Management system.
Entry Signal Settings: The indicator(s) selected in this section will determine the entry strategy followed. It is possible to enable more than one indicators for entry.
ENABLE Exit Signals

Disable: Exit will be based on Basic Order Management (i.e. TP, SL etc.)
Auto: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and wait for the next entry signal.
Reverse: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and at the same time open a new opposite position.
Custom: Only in this case the exit will be based on the indicators and the parameters set in the Exit Signal Settings section. If more than one indicators are enabled, then all indicators must return a signal within the same bar for the EA to close that position.

ENABLE Manual Panel: A panel for manual trades appears.

", "url": "https://www.mql5.com/it/market/product/25662", "small_icon": "https://c.mql5.com/31/214/tso-loss-management-lite-mt5-logo-60x60-3759.png", "middle_icon": "https://c.mql5.com/31/442/tso-loss-management-lite-mt5-logo-140x140-4047.png", "icon": "https://c.mql5.com/31/214/tso-loss-management-lite-mt5-logo-200x200-6515.png", "rating": 0, "price": 175, "published": 1506615414, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25663, "title": "TSO Loss Management MT5", "description": "

TSO Loss Management is an Expert Advisor that incorporates advanced mechanics to eliminate losses from losing trades.

\r\n

Adapts to diverse market conditions and micromanages each position to cover losses as fast as possible and with minimum risk
It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies
Add negative management to any strategy (manual or automated) to eliminate losing trades
No pending orders placed
Any account size - $1,000+ is recommended
Allows for a lot of customization (a default strategy included for demonstration purposes)

\r\n

Operation

\r\n

A trade loses enough to activate the Loss Management system
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance
Meanwhile, the Swings mechanism uses small swinging price movements to capture profit from sideways market
All positions are closed when their net loss, including the profits captured from swings, is zero (0) or a requested profit target has been reached

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this Expert Advisor can result in open trades that last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA

\r\n

Inputs specific to the Loss Management system

\r\n

Check the Quick Start Guide for detailed explanations.

\r\n

ENABLE Loss Management System
Distance to Activate Loss Management (pips)
Distance Between Loss Management Orders (pips)
ENABLE Dynamic Distances\r\n
- Simple: the lot size is adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐
- Smart: orders will be opened at the lines of support / resistance
- Disable
\r\n
Order after which Dynamic Distances Start [ONLY FOR EQUATION]
𝑎,𝑏,𝑐 [ONLY FOR EQUATION]
Select no of Bars (Odd Number) [ONLY FOR SMART]: Sets the number of candles required to determine the lines of support / resistance
ENABLE Dynamic Lot Size: Lot size adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
Number Of Orders Per Lot Size
𝑎,𝑏,𝑐
Lot Size Stabilizer (lots) [0 = Disable]: lot size at which the lots will remain constant
ENABLE Averaging
Averaging Target Profit (pips): The net profit to be gained after all orders are closed through averaging
ENABLE Swings: The Swings mechanism sets a profit target for each position opened through the Loss Management system and closes each position once the target has been reached
Order At Which Swings Start
Swings Target Profit (pips) [0 = Disable]
ENABLE Swings Profit Adjustment [ONLY FOR DYNAMIC DISTANCES]: This mechanism adjusts the size of the Swings target profit (above input) so that it remains proportional to the distance between positions
ENABLE Swing Trailing Stop: A trailing stop for each Loss Management position that follows the swing mechanism
Swing Trailing Stop Activation Level (pips)
Swing Trailing Stop Distance (pips)
Secure Ratio (0 = Disable) [ONLY IF SWINGS ENABLED]: The ratio between (Swings Captured Profit) / (Open Loss) at which the Loss Management cycle will be closed
(Open Loss) %_of_Balance for Secure Ratio Activation: The open loss as a percentage of current balance at which the Secure Ratio mechanism is activated
ENABLE Economy Mode 1: This mechanism uses the profit captured through swings in order to close open positions starting from the initial position and continuing through the positions opened through the Loss Management system, in the sequence they were opened
ENABLE Economy Mode 2: This mechanism closes the most profitable positions and the most losing position once the open profit of the former is equal to the open loss of the latter. This results in less open positions
(Open Loss) %_of_Balance for Economy Mode Activation
Balance Mode\r\n
- Static: Use the initial balance.
- Dynamic: Use the current balance
\r\n
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Management system

", "url": "https://www.mql5.com/it/market/product/25663", "small_icon": "https://c.mql5.com/31/205/tso-loss-management-mt5-logo-60x60-3368.png", "middle_icon": "https://c.mql5.com/31/439/tso-loss-management-mt5-logo-140x140-7711.png", "icon": "https://c.mql5.com/31/205/tso-loss-management-mt5-logo-200x200-3815.png", "rating": 0, "price": 249, "published": 1506615418, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25664, "title": "TSO Total Negative Management MT5", "description": "

The TSO Total Negative Management EA contains an adaptive negative management system that can prevent losing trades and even account collapse in almost any market condition.

\r\n

Adapts to adverse market conditions and switches to the correct negative management strategy for any situation.
TSO Signal Builder, TSO Order Recovery and TSO Loss Management are included and can be used in combination or individually.
Apply negative management to any strategy (manual or automated).
No pending orders placed.
Any account size - $1,000+ is recommended.
Works on any currency pair.
Lots of customization (a default strategy is included for demonstration purposes).
For detailed explanations for all the features check the Quick Start Guide.

\r\n

Combined Negative Management

\r\n

Two methods of negative management are combined, each with a very different approach. This way, negative management can adapt to situations where it faces adverse conditions and avoid an account collapse.

\r\n

The Loss Management system can eliminate losses when the market is trending favorably or moving sideways.
The Order Recovery system excels in situations where there is a clear strong trend, regardless of direction.

\r\n

TSO Signal Builder

\r\n

The TSO Signal Builder EA offers a library of 29 indicators as well as advanced position management, allowing to build an almost infinite amount of strategies.

\r\n

TSO Order Recovery

\r\n

The TSO Order Recovery system relies on hedging to cover losses, targeting to exit the market once a significant trend appears in any direction.

\r\n

It detects a losing trade and opens an opposite position of larger lot size at a fixed distance from the original trade creating a zone within which the loss is confined. This creates two scenarios:

\r\n

If the price reaches the target, the second position will cover the losses of the initial trade and even profit. All positions are then closed with a net profit.
If the price reaches the level of the initial trade an additional position is opened so that the total lots will now be more in the original order’s direction, so that the new position together with the initial one will cover the losses of the second trade and even profit if the price reaches the opposite target. All positions are then closed with a net profit.

\r\n

This process continues and new positions are opened each time the price reverses direction and passes from the edges of the zone, until one of the targets is reached.

\r\n

TSO Loss Management

\r\n

On the other hand, the TSO Loss Management system focuses on reinforcing the losing order, targeting on a small favorable trend, or even a sideways market movement to exit the market without net losses.

\r\n

Loss Management system strategy:

\r\n

A trade loses enough to activate the Loss Management system.
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance.
Meanwhile, the Swings mechanism uses small price movements to capture profit from sideways market.
All positions are closed when their net loss, including the profits captured from swings, is zero (0) or a requested profit target has been reached.

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this expert advisor can result in open trades that last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA.

\r\n

Key Inputs

\r\n

Check the Quick Start Guide for a detailed list.

\r\n

Basic inputs are the same as in TSO Signal Builder, TSO Order Recovery and TSO Loss Management. Additional inputs are displayed below:

\r\n

ENABLE Combined Order Recovery: If enabled, negative management is switched from the Loss Management to the Order Recovery system when the open loss reaches a percentage of balance.
- Dynamic: The open loss percentage is based on the current balance.
- Static: The open loss percentage is based on the initial balance.
- Disable.
\r\n
(Open Loss)%_of_Balance for Order Recovery Activation: The percentage value of the open loss to make the switch.

", "url": "https://www.mql5.com/it/market/product/25664", "small_icon": "https://c.mql5.com/31/205/tso-total-negative-management-mt5-logo-60x60-2625.png", "middle_icon": "https://c.mql5.com/31/442/tso-total-negative-management-mt5-logo-140x140-1331.png", "icon": "https://c.mql5.com/31/205/tso-total-negative-management-mt5-logo-200x200-1607.png", "rating": 0, "price": 499, "published": 1506615422, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25666, "title": "Level Alert", "description": "

If you are using horizontal levels, trend lines or equidistant channels, then this indicator will help you. You do not have to watch charts all the time. Just draw channels and lines and when the price will come close to it, the alert will notify you. You can use as many horizontal levels, trend lines, equidistant channels as you need. There is an option to alert only certain levels on the chart.

\r\n

The indicator is really easy to use. It has a switch button to turn it on and off any time. For better performance, first you need to draw all of the lines and only then to turn the alert on with the button.

\r\n

Parameters

\r\n

Distance from a level when alert goes off - when difference between the current price and the level is less than this parameter, the alert goes off.
Distance from a level when alert resets – after the alert went off, it will be reset when the difference between the current price and the level is greater than this parameter.
Work only when object's name ends with _alert – alert only of certain levels. Just add “_alert” to the object’s name.
Sends push notifications to the mobile terminals – send push notifications to the mobile terminals, whose MetaQuotes IDs are specified in the Notifications tab.

", "url": "https://www.mql5.com/it/market/product/25666", "small_icon": "https://c.mql5.com/31/205/level-alert-logo-60x60-2367.png", "middle_icon": "https://c.mql5.com/31/440/level-alert-logo-140x140-7733.png", "icon": "https://c.mql5.com/31/205/level-alert-logo-200x200-8203.png", "rating": 0, "price": 30, "published": 1506694331, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25777, "title": "CME CallPut Option Ratio MT5", "description": "

Call/Put Ratio is one of the most well-known indicators of the market sentiment. The indicator has been developed by Martin Zweig. It is based on real volumes of the CBOE option market. As we know, a Call option gives its owner the right to buy the underlying asset at a predetermined price. A Put option gives the right to sell it. Thus, increasing volumes for Call options indicate the increasing demand. The growth of Put option volumes shows that supply starts exceeding demand. If we divide the volume of Call options by the total trading volume, we get a ratio showing the share of purchases relative to the total market share. It varies from 0 to 1 and is a high-frequency oscillator. The indicator allows us to use not only the volumes of option markets, but also the levels of their open interest as a calculation base enabling us to analyze the markets more deeply.

\r\n

The indicator shows three zones:

\r\n

Supply and demand are approximately equal (gray area);
Demand significantly exceeds supply (green area);
Supply significantly exceeds demand (red area).

\r\n

Any market is characterized by a frequent change of states: after a rapid growth, there is a period of active selling, and on the contrary, a strong selling may be followed by an inexplicable period of growth. Call Put Ratio identifies the change of these phases and shows you when you can open a long or short position. Buy when CallPut Ratio goes into the green zone, provided that it was in the red one a few bars ago. On the contrary, sell when the indicator has moved to the red zone from the green one. You can also follow the signal of the red signal line: buy when its fall is replaced by growth, and sell when its growth is replaced by fall.

\r\n

You can find more details about the indicator in the book \"Trading Against the Crowd: Profiting from Fear and Greed in Stock, Futures and Options Markets\" by John Summa.

\r\n

The data on the option volumes ratio are taken from one section of the \"daily bulletin\" - report of the CME, published weekly. This section is called Daily Volume, it is available as Excel files on the official ftp server of the exchange. To update the data on CallPut Ratio, simply copy the corresponding reports to the indicator folder. Detailed instructions on performing the update can be found in the blog How to update CME reports on your PC. The demonstration mode (during testing) does not require the data, the indicator loads them from its internal memory. However, updating the reports is not possible in the demo version, therefore, the CallPut Ratio is displayed with some delay in this mode. The indicator works on any timeframe, but the data are available only for the daily timeframe; therefore, the suggested working chart period is D1. Nevertheless, the volumes of the current trading day are always available. They are updated several times during the trading session.

\r\n

Inputs:

\r\n

Color Theme - select one of the indicator's three color schemes;
Type of CME Volume - one of the CME real volume types, including open interest;
Stundart Deviation - standard deviation ratio, beyond which the CallPut Ratio moves to the red or green area;
Period of Signal Line - averaging period of the moving average;
Auto Detect Report Name - true means the necessary reports are downloaded automatically. Otherwise, the reports specified in the following two parameters are downloaded instead;
Call Option Name - Call option name to be downloaded;
Put Option Name - Put option name to be downloaded.
Update Frequency Min - frequency of updating data from the file base. 0 - updates disabled, 1 - updates occur once a minute.

", "url": "https://www.mql5.com/it/market/product/25777", "small_icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-60x60-2860.png", "middle_icon": "https://c.mql5.com/31/447/cme-callput-option-ratio-mt5-logo-140x140-3910.png", "icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-200x200-5524.png", "rating": 5, "price": 30, "published": 1507642455, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25794, "title": "FFx Pivot SR Suite Pro MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/25793

\r\n

FFx Pivot SR Suite PRO is a complete suite for support and resistance levels. Support and Resistance are the most used levels in all kinds of trading.

\r\n

Can be used to find reversal trend, to set targets and stop, etc.

\r\n

The indicator is fully flexible directly from the chart

\r\n

4 periods to choose for the calculation: 4Hours, Daily, Weekly and Monthly
4 formulas to choose for the calculation: Classic, Camarilla, Fibonacci and Woodies
Options to choose your own price OHLC for a custom calculation
Alert selectable for each level separately
Each level can be hidden
Levels can be set to display multiple periods in history (great for studying past trading setups)
Panel can be moved (drag and drop) anywhere on the chart
Show or hide the levels table
Show or hide the levels lines

\r\n

User Inputs

\r\n

Panel ID - number for each instance applied on the same chart
History Back Period - set here the number of periods in history to draw the SR lines
Show Lines Text - set here if you want the name and price to be shown with each level
Lines Text Shift - set here the shift of the lines text from the current candle
Lines Style - select here the style for the lines (solid, dot, etc.)
Lines Width - set here the width for the lines
Levels Colors - set here the colors for each levels
Fibo Levels - set here the Fibo % for the Fibo SR calculation
Alert at Candle close - select here to enable the alert at candle close
Sound Alert - select here to enable the sound alert
Sound File - set here the sound file name
Popup Alert - select here to enable the popup alert
Email Alert - select here to enable the email alert
Push Alert - select here to enable the push notification

", "url": "https://www.mql5.com/it/market/product/25794", "small_icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-60x60-4429.png", "middle_icon": "https://c.mql5.com/31/446/ffx-pivot-sr-suite-pro-mt5-logo-140x140-6311.png", "icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-200x200-7721.png", "rating": 0, "price": 3030, "published": 1507624521, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25804, "title": "Jack of all Trades MT5", "description": "

Jack of all Trades MT5 is an Expert Advisor for trading high market moves. This is a fully automated EA optimized for multicurrency EURUSD, EURGBP, GBPUSD, USDCAD, USDJPY. The EA can be used on any timeframe because the indicators are locked to M10. The EA uses MACD(7,21,4), MOMENTUM(11) and candlestick history for last 10 candles on M10 for creating a signal. Because the EA is locked on M10, the trades will open on the same spot, it does not matter, on which timeframe it is tested. The EA also uses news events for creating a signal.

\r\n

Important: While the signals made by the indicators are fine, the ones made by news events require small ping (less than 30 ms), so for the best performances cloud server is recommended.

\r\n

Using Jack of all Trades MT5

\r\n

inp1_VolumeRisk: Buy Percentage - risked amount for buy trades in percent of the users balance. Default is 2.5%.
inp1_VolumeUpperLimit: Maximum lot for Buy trades. Default is 10 lot.
inp2_VolumeRisk: Sell Percentage - risked amount for sell trades in percent of the users balance. Default is 2.5%.
inp2_VolumeUpperLimit: Maximum lot for Sell trades. Default 10 lot.
inp3_maxSpread - maximum spread used to open trades. If the spread is above the set value, the EA will not trade. Default is 5 pips. NOTE: the value is in standard pips. It can be used on four and five digit brokers but the EA always uses the fourth digit 1.1384 (fourth decimal in price value). It can be also set as a five-digit spread filter by using decimals. Example: (2.5) 1.13845.

\r\n

Good luck and profitable trade to everyone!

", "url": "https://www.mql5.com/it/market/product/25804", "small_icon": "https://c.mql5.com/31/207/jack-of-all-trades-mt5-logo-60x60-9213.png", "middle_icon": "https://c.mql5.com/31/446/jack-of-all-trades-mt5-logo-140x140-4185.png", "icon": "https://c.mql5.com/31/207/jack-of-all-trades-mt5-logo-200x200-5389.png", "rating": 0, "price": 1500, "published": 1507728144, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25890, "title": "TSO Top Bottom Divergence MACD MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the MACD oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and MACD divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the MACD divergence indicator.
Fast Period: Set the fast period of the MACD oscillator.
Slow Period: Set the slow period of the MACD oscillator.
Signal Period: Set the signal period of the MACD oscillator.
Applied Price: The candlestick price to be used for MACD calculations.
Relationship between Double Top-Bottom and MACD Divergence:

Combined: All Double Top - Bottom signals are shown but only the MACD Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and MACD Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If MACD Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

MACD value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

MACD Signal value: Buffer = 7

", "url": "https://www.mql5.com/it/market/product/25890", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-60x60-9081.png", "middle_icon": "https://c.mql5.com/31/440/tso-top-bottom-divergence-macd-mt5-logo-140x140-1508.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-200x200-3884.png", "rating": 0, "price": 39, "published": 1508162393, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25893, "title": "TSO Top Bottom Divergence Momentum MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the Momentum oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and Momentum divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the Momentum divergence indicator.
Period: Set the period of the Momentum oscillator.
Applied Price: The candlestick price to be used for Momentum calculations.
Relationship between Double Top-Bottom and Momentum Divergence:

Combined: All Double Top - Bottom signals are shown but only the Momentum Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and Momentum Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If Momentum Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

Momentum value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

", "url": "https://www.mql5.com/it/market/product/25893", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-60x60-8714.png", "middle_icon": "https://c.mql5.com/31/441/tso-top-bottom-divergence-momentum-mt5-logo-140x140-7494.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-200x200-7984.png", "rating": 0, "price": 39, "published": 1508162383, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25929, "title": "Reversal Expert for MT5", "description": "

Reversal Expert is a fully automatic Forex Expert Advisor. For several years, the robot enters on reversal signals to make quick profits. When the target is not reached, the position is slowly increased until it becomes profitable (see screenshots below).

\r\n

Best results are observed on GBPUSD, USDCAD, EURGBP and AUDUSD on the M15 timeframe.

\r\n\r\n

\r\n

Advantages

\r\n

Tunable risk.
Can work on several Forex pairs in the same account.
Large user base since 2013.
Lot size automatically adapted to your balance.
Reactive support channel.
Backtested since 2007.
No parameters to optimize (because optimizing is cheating).
Works well with a common DSL line (but VPS is recommended for set&forget).
The same algorithm works since 2013, no upgrade planned, no \"new settings to fit the market...\".
Very easy to install.

\r\n\r\n

\r\n

Parameters

\r\n

There is only one: Risk and I recommend to leave the default value.
However you may want to test other values with Strategy Tester.
Risk is a ratio applied on your Balance level to decide on the Lot size.
No other parameter is tunable.

\r\n\r\n

\r\n

How Does It Work?

\r\n

Reversal Expert applies the best known techniques for automated trading. There are basically 2 main modules:

\r\n

Finding good entry points. The robot detects situations where a movement is expected soon. Pending orders are set for a brief amount of time and are deleted if the expected movement doesn't happen. You will see many canceled orders, this is perfectly normal.
Exiting with a profit. Once a position is opened, the robot will look into a quick profit. If it doesn't happen, a recovery mechanism will take over the situation to avoid a loss, so the customer always ends positive.

\r\n\r\n

\r\n

Recommendation

\r\n

The recommended minimum balance is 2500 EUR (Risk=0.16).
But you can use this Expert with less balance, just increase the Risk:

2000 EUR → Risk=0.19.
1500 EUR → Risk=0.28.
1000 EUR → Risk=0.45.

", "url": "https://www.mql5.com/it/market/product/25929", "small_icon": "https://c.mql5.com/31/208/reversal-expert-for-mt5-logo-60x60-5706.png", "middle_icon": "https://c.mql5.com/31/441/reversal-expert-for-mt5-logo-140x140-1257.png", "icon": "https://c.mql5.com/31/208/reversal-expert-for-mt5-logo-200x200-5993.png", "rating": 0, "price": 997, "published": 1510840228, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25939, "title": "IlanisMT5", "description": "

Ilanis is an Expert Advisor for stock trading, it can be used for trading on Forex and other markets, including commodities, metals and index markets.

\r\n

To determine the market entry, the EA uses the modern and ultra-light adaptive indicator FourAverage.

\r\n

Principle of position maintaining is similar to that of the popular Forex robot Ilan, using averaging. But unlike Ilan, Ilanis uses an accurate entry into the market. The robot pays a lot of attention to position control, if the price goes in the expected direction. This is done by increasing the lot based on Martingale (ExpLot coefficient can be set in the settings, usually from 1.1 to 1.8).

\r\n

Trading is based on the idea that 80% of time the market is moving in a flat. Long trends can be dangerous for the Expert Advisor, but they are rare. Some extraordinary events, like war, economic collapse, etc., can cause such trends. Information about these events can be found on news sites. It is advisable to turn off the EA in such cases. If this fails, through a flexible system of money management the robot is able in most cases to bring the combined position (even those open against the trend) to profit, the amount of which may considerably exceed the initially planned one. Although risks are higher in this case.

\r\n

The main rule when working with Ilanis: do not be greedy, do not increase the lot, use the settings obtained after a proper optimization. Do not forget to optimize parameters for the current market from time to time.

\r\n

The free version of the Expert Advisor: https://www.mql5.com/en/market/product/25940;
Monitoring of the Ilanis Expert Advisor: https://www.mql5.com/en/signals/author/fastinvestments
Ilanis for MetaTrader4: https://www.mql5.com/en/market/product/16559

\r\n

Trading conditions

\r\n

Trading terminal: MetaTrader 5.
Accounts that support hedging.
Currency pair: Any pair.
Time frame: no restriction.

\r\n

Parameters

\r\n

Sets – override settings in ---=BUY SETTING=--- and ---=SELL SETTING=--- with the built-in presets.

\r\n

---=BUY SETTING=---

\r\n

BUY - Enables BUY.
PeriodFA1 - Calculation period of the FourAverage indicator (1-200).
Average1_1 - The first level of adaptive smoothing, a value of 0-300.

\r\n

---=SELL SETTING=---

\r\n

SELL - Enables SELL.
PeriodFA2 - Calculation period of the FourAverage indicator (1-200).
Average2_1 - The first level of adaptive smoothing, a value of 0-300.

\r\n

---=MONEY MANAGEMENT SETTING =---

\r\n

Lot - lot size of the first order. If the value is negative, it is used as a fixed lot (Example: Lot = -0.01 the trade will be opened with the size of 0.01 lot). If the value is positive, specify the volume per 1000 units of the deposit (Example: Lot = 0.04, deposit is $2000, the trade will be opened with the volume of 0.08 lot).
ExpLot - lot multiplier for the subsequent orders in a series.
Commission - your broker's commission for one lot.
StopLoss and TakeProfit - positive values: in points of the first order in a series. Negative values: in the deposit currency per 1 lot of the first order in the series.

\r\n

--------=FILTER=--------

\r\n

BlockOpenOldPrice - disable opening at a price better than the previous trade.
StopIlanis - disable opening new series, the current series will be continued.
StartHour - trading start time.
NotWorkingHours - hours to prohibit trading. Example: \"0, 1, 2, 3, 22, 23\".
NotWorkingDayWeek - days of the week to prohibit trading. Example with prohibition on Monday and Friday: \"1, 5\".

\r\n

---=ORDERS SETTING=---

\r\n

MaxSpread - if the current spread is greater than this value, the trade will not be opened.
MagicNumber_ - beginning of the range of magic numbers occupied by the Expert Advisor. The EA occupies 50 numbers.
Slippage - slippage accepted from expert.

", "url": "https://www.mql5.com/it/market/product/25939", "small_icon": "https://c.mql5.com/31/208/ilanismt5-logo-60x60-4042.png", "middle_icon": "https://c.mql5.com/31/438/ilanismt5-logo-140x140-8841.png", "icon": "https://c.mql5.com/31/208/ilanismt5-logo-200x200-1376.png", "rating": 3.857143, "price": 30, "published": 1508852514, "popularity": 0, "category": "Expert", "votes": 7 }, { "id": 26025, "title": "SmartArrows", "description": "

For any trader, the result of market analysis is the correct identification of the market entry and exit points. The more correctly they are selected, the more profitable the trading. The SmartArrows indicator does not display any excessive information that may distract or confuse the trader, but only the mot important things. The indicator is very simple to use. When a down arrow appears, open a SELL trade, with an up arrow open BUY.

\r\n

Despite its seeming simplicity, the SmartArrows indicator contains a large analytical algorithm, which allows it to work as efficiently as possible.

\r\n

The indicator generates 2 types of signals - confirmed and unconfirmed. Confirmed signal (large white arrow) is a signal that corresponds to the global trend, unconfirmed signal (small arrow) is a signal that goes against the global trend. Each user can select the suitable trading mode - use all indicator signal, or only the ones that match the global trend.

\r\n

This indicator does not redraw, it generates signals on the current bar. If an arrow appears, it does not disappear regardless of the development of the market situation.

\r\n

Indicator Input Parameters

\r\n

period - sensitivity of the indicator (the higher the value, the fewer signals are obtained)
EnableAlerts - enable/disable generating audio alerts when a signal appears
EmailAlert - enable/disable sending email messages when a signal appears
MobileAlert - enable/disable sending push notifications when a signal appears
UseFilter - use the filter of signals based on correspondence to the global trend
MainFilterPeriod - global filter parameter (if UseFilter = true)
ExtraFilterPeriod - additional filter parameter (if UseFilter = true)

", "url": "https://www.mql5.com/it/market/product/26025", "small_icon": "https://c.mql5.com/31/209/smartarrows-logo-60x60-9197.png", "middle_icon": "https://c.mql5.com/31/441/smartarrows-logo-140x140-4278.png", "icon": "https://c.mql5.com/31/209/smartarrows-logo-200x200-6199.png", "rating": 5, "price": 69, "published": 1508837704, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 26092, "title": "TSO Total Top Bottom Divergence MT5", "description": "

A must-have tool for any strategy based on divergence detection. 10 different oscillators can be used to detect divergences and can be combined with Double Top/Bottom patterns to confirm reversal signals.

SCANNER is included. Now with Scanner you can find trading opportunities and setups easily and faster.

Features

Easily detect strong reversal signals.
10 different oscillators are available for divergence detection.
Divergence & Top/Bottom detection can operate independently or combined.
Get email / push notifications when a divergence is detected.
The indicator is not repainting.
Can easily be used in an EA (see For Developers).

Available Oscillators for Divergence Detection

Relative Strength Index (RSI).
Commodity Channel Index (CCI).
Chaikin Oscillator (CHO).
Chande Momentum Oscillator (CMO).
Moving Average Convergence Divergence (MACD).
Momentum.
Stochastic.
Stochastic RSI.
Relative Vigor Index (RVI).
Rate Of Change (ROC).

Inputs

Name: The name to appear in the parentheses at the top left corner of the oscillator window.
ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
Select Divergence Oscillator: Select one of the available divergence indicators or disable divergence detection.
Relationship between Double Top-Bottom and RSI Divergence:
- Combined: All Double Top - Bottom signals are shown but only the RSI Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and RSI Divergence indicators should be enabled.
- Independent: Each indicator presents their signals independently.
Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If RSI Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.

The following inputs are separated into groups relating to each of the available oscillators. Only the inputs relating to the indicator selected in the Select Divergence Oscillator field need to be adjusted.

RSI Period.
RSI Applied Price: The bar price to be used for RSI calculations.

CCI Period.
CCI Applied Price: The bar price to be used for CCI calculations.

CHO Fast Period: Set the fast period of CHO.
CHO Slow Period: Set the slow period of CHO.
CHO Method: Set the method of calculation of CHO.
CHO Applied Volume: The volume to be used for CHO calculations. (Use real volume only when provided, e.g. stocks, and tick volume when real is not available, e.g. FOREX).

CMO Period.

MACD Fast Period: Set the fast period of MACD.
MACD Slow Period: Set the slow period of MACD.
MACD Signal Period: Set the period for the MACD signal.
MACD Applied Price: The bar price to be used for MACD calculations.

Momentum Period.
Momentum Applied Price: The bar price to be used for Momentum calculations.

Stochastic %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic %D Period: Set the period for calculating %D of the Stochastic oscillator.
Stochastic Slowing: Set the internal smoothing of %K.
Stochastic Method: Set the method that is used to calculate %D.
Stochastic Price Field: The volume to be used for the Stochastic oscillator calculations. (Typically Real for stocks, Tick for FOREX).

Stochastic RSI period: Set the period of RSI.
Stochastic RSI %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic RSI %D Period: Set the period for calculating %D of the Stochastic oscillator.

RVI Period.

ROC Period.

ENABLE MetaTrader Alert / Email Alert / Push Notifications
- Disable.
- Combined: Receive alerts only when the Top/Bottom and Divergence indicators agree on a signal.
- Only Top Bottom: Receive alerts only for Top/Bottom signals.
- Only Divergence: Receive alerts only for Divergence signals.
- Both: Receive alerts for both Top/Bottom and Divergence signals.

", "url": "https://www.mql5.com/it/market/product/26092", "small_icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-60x60-4164.png", "middle_icon": "https://c.mql5.com/31/441/tso-total-top-bottom-divergence-mt5-logo-140x140-7144.png", "icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-200x200-3406.png", "rating": 1, "price": 99, "published": 1509715802, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 26105, "title": "TSO Moving Average Slope Combination MT5", "description": "

The Moving Average Slope (MAS) is calculated by detecting the moving average level n-periods ago and comparing it with the current moving average level. This way, the trend of the moving average can be drawn on the moving average line. This indicator allows to compare the slopes of two moving averages (fast and slow) to cancel out noise and provide better quality entry and exit signals

SCANNER is included. Now with Scanner you can find trading opportunities and setups easily and faster.

Features

Observe uptrends and downtrends at a glance.
Supports Multiple Moving Average Methods.
Add second MA (of different period/type) to confirm signals.
The indicator is non-repainting.
Can be used as part of an EA. (see For EA Developers)

Supported Moving Average Methods

Simple Moving Average (SMA)
Exponential Moving Average (EMA)
Smoothed Moving Average (SMA)
Linear Weighted Moving Average (SMMA)
Double Exponential Moving Average (DEMA)
Triple Exponential Moving Average (TEMA)
Fractal Adaptive Moving Average (FAMA)
Adaptive Moving Average (AMA)
Variable Index Dynamic Average (VIDYA)

Slope Calculation

The slope is calculated by subtracting the price of the moving average n periods ago from the current price of the moving average.
The slope is then classified (upwards, downwards, horizontal) and color-coded (green, red, blue) based on the average true range (ATR) n-periods back.

If the current price of the moving average is higher than the price of the moving average n-periods back by more than the ATR n-periods back, the slope is considered positive (green).

If |MAPrice(current) > Price(n-periods)| and |Price(current)-Price(n-periods)| > |ATR(n-periods)|, then Slope > 0

If the current price of the moving average is lower than the price of the moving average n-periods back by more than the ATR n-periods back, the slope is considered positive (green).

If |Price(current) < Price(n-periods)| and |Price(current)-Price(n-periods)| > |ATR(n-periods)|, then Slope < 0

If the current price of the moving average is higher or lower than the price of the moving average n-periods back but their distance is less than the ATR n-periods back, the slope is considered horizontal (blue).

If |Price(current) - Price(n-periods)| < |ATR(n-periods)|, then Slope = 0

Inputs

Fast / Slow Moving Average Method: The method used to calculate the MA. Select 'Disable' in one of the two inputs to turn it off and use a single MA.
Period: The period of the MA.
Shift: The number of periods to shift the MA.
Applied Price: The candlestick price level to be used for MA calculations.
Slope: The number (n) of periods to look back for slope calculation.
ATR Period: The Average True Range period to be used for slope classification.
Fast EMA Period [ONLY FOR ADAPTIVE MA]: The period of the fast EMA in the Adaptive Moving Average calculation. This input is used only if 'Adaptive Moving Average' has been selected as the MA Method. Otherwise, this input is irrelevant.
Slow EMA Period [ONLY FOR ADAPTIVE MA]: The period of the slow EMA in the Adaptive Moving Average calculation. This input is used only if 'Adaptive Moving Average' has been selected as the MA Method. Otherwise, this input is irrelevant.
CMO Period [ONLY FOR VIDYA]: The period of the Chande Momentum Oscillator (CMO) used in the Variable Index Dynamic Average calculation. This input is used only if 'Variable Index Dynamic Average' has been selected as the MA Method. Otherwise, this input is irrelevant.

For EA Developers

Fast MA Color: Buffer = 1

Green = 0
Red = 1
Blue = 2

Slow MA Color: Buffer = 3

Green = 0
Red = 1
Blue = 2

Vertical Lines' Color: Buffer = 6

Green = 0
Red = 1
Blue = 2

Vertical Lines' Length (pips): Buffer = 7

", "url": "https://www.mql5.com/it/market/product/26105", "small_icon": "https://c.mql5.com/31/215/tso-moving-average-slope-combination-mt5-logo-60x60-3684.png", "middle_icon": "https://c.mql5.com/31/438/tso-moving-average-slope-combination-mt5-logo-140x140-9405.png", "icon": "https://c.mql5.com/31/215/tso-moving-average-slope-combination-mt5-logo-200x200-5624.png", "rating": 0, "price": 99, "published": 1511950622, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26107, "title": "TSO Price Channel MT5", "description": "

TSO Price Channel is complete trading strategy focused on creating profit from market volatility. The system takes advantage of the intrinsic tendency of the market to reach its periodic maximum and minimum levels. By allowing the use of multiple instruments, the exposure of the system to any single instrument is reduced.

\r\n

Complete strategy including fully integrated positive and negative management.
Works on any instrument.
No pending orders placed.
Any account size - $1,000+ is recommended.

\r\n

Backtesting

\r\n

Based on a 7-year backtest period, the system has demonstrated the ability to adapt to any type of market scenario. This can be seen in the screenshots below demonstrating its performance. This setup is currently running in a real account and it is also available to rent as a signal at https://www.mql5.com/en/signals/400167. The inputs used in this setup are the default values for this EA.

\r\n

Inputs

\r\n

Portfolio Symbols: The symbols of the instruments to be traded, separated by commas without spaces. E.g. EURUSD,GBPUSD,USDCHF.
Base Lot per Symbol: The minimum lot size to be traded for each instrument, separated by commas without spaces. Lot sizes must be in the same order as their corresponding instrument. E.g. for EURUSD and GBPUSD to have a minimum lot of 0.1 and USDCHF a minimum lot of 0.08 the input would be 0.1,0.1,0.08.
Lots Limit per Symbol: The maximum lot size that will be opened in a single order per bar for each instrument, separated by commas without spaces. Fill this input in the same fashion as Base Lot per Symbol.
Dynamic Lot Size: Set to true for the base lot size to be adjusted automatically in proportionality to the balance. Base lot will increase or decrease proportionally as the balance changes.
Initial Balance: Required only if Dynamic Lot Size is enabled. It is the initial balance when the EA was first started. This ensures that lot size - balance proportionality is maintained even if the EA is terminated and then restarted.
Entry Signal Period per Symbol: The lookback period used to produce the entry signal for each instrument, separated by commas without spaces. Typical values can range from 5-300. Fill this input in the same fashion as Base Lot per Symbol.
Exit Signal Period per Symbol: The lookback period used to produce the exit signal for each instrument, separated by commas without spaces. Typical values can range from 5-300. Fill this input in the same fashion as Base Lot per Symbol.
Risk Reducer per Symbol: A mechanism used to filter out periods of low market volatility and, thus, riskier entries. Causes a delay in entry but can create better quality entries. A value between 0 (Disabled) and 10 (Strong Filtering) is recommended for each instrument, separated by commas without spaces. Fill this input in the same fashion as Base Lot per Symbol.
Booster: A mechanism used to increase the base lot size of trades with a stronger entry signal. The higher the setting, the greater the lot size boost but also the risk. The MEDIUM setting is recommended as the best risk-reward option.
Safe Stop Button: It is recommended to always set to true in order to have a safe stop button appear on the chart running the EA. Pressing the button would then stop the EA from opening new positions beyond those necessary for the strategy. This allows to terminate the EA without any open positions.

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this Expert Advisor can result in open trades that last from hours to days and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

", "url": "https://www.mql5.com/it/market/product/26107", "small_icon": "https://c.mql5.com/31/247/tso-top-bottom-divergence-chaikin-oscillator-mt5-logo-60x60-3012.png", "middle_icon": "https://c.mql5.com/31/446/tso-price-channel-mt5-logo-140x140-2330.png", "icon": "https://c.mql5.com/31/247/tso-top-bottom-divergence-chaikin-oscillator-mt5-logo-200x200-9199.png", "rating": 0, "price": 1750, "published": 1531501667, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26109, "title": "TSO Bollinger Bandit Strategy MT5", "description": "

TSO Bollinger Bandit Strategy is an indicator based on the Bollinger Bandit Trading Strategy as presented in the book Building Winning Trading Systems with TradeStation by G. Pruitt and J. R. Hill.

SCANNER is included. Now with Scanner you can find trading opportunities and setups easily and faster.

Features

A complete entry and exit strategy for trending markets.
Get email / push notifications when an entry signal occurs.
The indicator is not repainting.
Can easily be used in an EA. (see For Developers)

Entry Conditions

This strategy uses the Bollinger Bands as breakout indicators, i.e. a potential long entry signal is generated when a candle closes above the upper Bollinger Band and a potential short entry signal is generated when a candle closes below the lower Bollinger Band.

To have an entry signal, except from passing the Bollinger Bands, the close of the current candle must be greater than the close of X periods ago for a long entry or lower than X periods ago for a short entry.

Exit Conditions

When a position is initiated, a stop loss is set at a Moving Average. For every period that the strategy remains in a position, the number of periods used for the Moving Average calculation is reduced. This happens until a minimum limit for the Moving Average period is reached. From that point on the period of the Moving Average remains constant.

To create an exit signal the moving average must be below the upper band if we are long and above the lower band if we are short. This element was added to prevent the system from going back into the same trade that was just liquidated.

Inputs

Bollinger Band Settings

Period - the period of the Bollinger Bands.
Deviation - the number of standard deviations between the bands and the moving average.
Shift - the number of time periods to shift the Bollinger Band indicator.
Apply to - the candle price on which the Bollinger Band calculations will be based.

Moving Average SL Settings

Period - the period of the Moving Average.
Rate of Period Reduction - the amount by which the period of the Moving Average Stop Loss is reduced at each candle after an entry signal.
Minimum Period - the minimum limit for the period of the Moving Average Stop Loss. The Moving Average will remain constant when this period is reached.
Shift - the number of time periods to shift the Moving Average indicator.
Method - the method used to calculate the Moving Average.
Apply to - the candle price on which the Moving Average calculations will be based.

Trend Filter Settings
Lookback Period - the number of periods to look back for the previous close to compare with the current close and confirm the entry signal.
Maximum Drawn Bars - the number of bars the indicator will be drawn on. For example, if set to 1000, the indicator will be drawn on the last 1000 bars of the chart.
Alert Settings

ENABLE Metatrader Alerts - set to \"true\" to receive an alert on the Metatrader platform when an entry signal appears.
ENABLE Email Alerts - set to \"true\" to receive an email alert when an entry signal appears.
ENABLE Push Notifications - set to \"true\" to receive a push notification on your mobile phone when an entry signal appears.

For EA Developers

Moving Average Stop Loss value: Buffer = 15
Signal: Buffer = 14

Buy = 0
Sell = 1

", "url": "https://www.mql5.com/it/market/product/26109", "small_icon": "https://c.mql5.com/31/241/tso-bollinger-bandit-strategy-mt5-logo-60x60-9601.png", "middle_icon": "https://c.mql5.com/31/444/tso-bollinger-bandit-strategy-mt5-logo-140x140-9645.png", "icon": "https://c.mql5.com/31/241/tso-bollinger-bandit-strategy-mt5-logo-200x200-4491.png", "rating": 5, "price": 69, "published": 1524764542, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 26130, "title": "MMM Heiken Ashi", "description": "

MMM Heiken Ashi strategy:

\r\n

The robot uses its built-in Heiken Ashi improved and tested indicator all the time and does a calculation to determine the prices trends. It sends an order, closes or moves the Trailing Stop loss position as the indicator works. Perfect for Scalping;
It will not send an order unless the calculations determine a good trend of profit;
Like all MMM products, it is also programmed to minimize your losses and protect your money from the hostile market. We have protections like Trailing Stop Loss where the stop loss may be moved near to the pair current price once the order has positive profit. You can also define the account minimum equity percentage required to send a new order.
You can define the orders limits of profits in currency value.

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Orders expiration time in minutes: this parameter was created to set the order expiration order in minutes. The default value is 1440 minutes (one day). Set it to 0 if you do not want to use it. The minimum value is 10 minutes;
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Magic Number: this parameter identifies the order the EA is working with;
Double Lots on Gain: if true, the EA will double the volume of the next orders after closing a profitable order of the current symbol. If you do not want to use it, fill it out with false. If set to true works in Martingale mode;

\r\n

Indicator's Inputs

\r\n

Number of bars to calculate trends: defines the number of bars used on trend calculations;
Moving Average Period: defines the moving average time frame to work inside Heiken Ashi algorithm. Best results if this time frame is smaller than the graphic's time frame;
Moving Average Method: defines the moving average method to work inside Heiken Ashi algorithm. Best results if this time frame is smaller than the graphic's time frame;

", "url": "https://www.mql5.com/it/market/product/26130", "small_icon": "https://c.mql5.com/31/212/mmm-heiken-ashi-logo-60x60-6018.png", "middle_icon": "https://c.mql5.com/31/438/mmm-heiken-ashi-logo-140x140-4483.png", "icon": "https://c.mql5.com/31/212/mmm-heiken-ashi-logo-200x200-5942.png", "rating": 0, "price": 99, "published": 1509715795, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26153, "title": "Check Execution", "description": "

This script will show you information about the execution speed of market orders.

Instruction

1. Press \"File/Open Data Folder\"

2. Copy the log-files from ../Logs to ../MQL5/Files

3. Run the CheckExec script on EURUSD chart, for example

4. Select parameters:

AllOrders - check execution time of all market orders for EURUSD,
OpenOrders - check execution time of market orders which where used to open positions on EURUSD,
CloseOrders - check execution time of market orders which where used to close positions on EURUSD.

The result will be displayed at the top left corner of the chart.

", "url": "https://www.mql5.com/it/market/product/26153", "small_icon": "https://c.mql5.com/31/211/check-execution-logo-60x60-6478.png", "middle_icon": "https://c.mql5.com/31/440/check-execution-logo-140x140-1658.png", "icon": "https://c.mql5.com/31/211/check-execution-logo-200x200-2897.png", "rating": 1, "price": 30, "published": 1509975918, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 26164, "title": "GS Trend5", "description": "

The advisor is designed for autonomous automatic round-the-clock trading on the EUR/USD pair, timeframe M15.

There is a protection of the deposit from significant drawdown and a mode for saving a profitable transaction.

Trades one deal. With the set parameters, it turns out to be one per day on average.

How it works

Uses the author's algorithm for analyzing three indicators and the direction of market movement to make a decision to open a deal.

RSI
Stochastic
Bands
market direction

Opens an order based on trend characteristics with set SL and TP in accordance with the specified StopLoss and TakeProfit parameters.

The position can be accompanied by a Trailing algorithm (Use Trailing=true; parameter)

Closes a position based on reversal signs (Acceptable loss, Acceptable profit parameters) or specified StopLoss and TakeProfit parameters.

If there is no order open by him, the advisor analyzes the current opportunity for a trade.

Deposit protection: The advisor remembers the maximum deposit value reached and if the current one is less than the set percentage, SaveDeposit stops trading.

Profitable trade saving mode: The SaveProfit parameter sets the percentage of the TakeProfit parameter value.

The resulting value is used by the advisor to close the deal in the event of a market reversal.

If SaveProfit = 0 the mode is not used.

Recommended conditions

Can work on any accounts, with any deposit and leverage, for example:

Deposit: 100 USD
Leverage : 1:20
Currency pair: EUR/USD
Timeframe: M15
Any types of accounts (Netting, Hedging)

Description of parameters

MagicNumber = 133500; - must be unique for each chart
SaveDeposit = 50; - percentage of deposit saved from the maximum reached (if the current is less - stops trading)
Use Money Management (Lot % from Balance) = true;
Risk level = Medium;
Lots = 0.01; - lot volume
Order Stop Loss = 800; - parameter for setting StopLoss of the transaction (more than 30)
Order Take Profit = 1000; - parameter for setting the TakeProfit of the transaction (more than 30)
Acceptable loss = 650; - acceptable loss parameter (greater than 0)
Acceptable profit = 650; - acceptable profit parameter (greater than 0)
SaveProfit = 32; - percentage of profit retention from the value set by the TakeProfit parameter when the market reverses (from 0 to 90)
Max spread for opening positions = 0; 0 - not use
------- Trailing -------
Use Trailing = true;
Trailing timer, in seconds =10;
Trailing Stop, cents = 225;
Trailing Step, cents =38
Slippage (Deviation in cents) =10;
------- Trend -------
Parameter of market movement =600; - parameter of the algorithm for determining the direction of market movement
Trend timeframe = M15;
Trend level mode = Average Open/Close;
Trend period =24;
Trend filter =1;
------- Stochastic -------
lo_level = 16; - Stochastic indicator parameter
------ RSI -------
lower = 40; - RSI indicator parameter
------- Bollinger Bands -------
bb_delta = 37; - Bands indicator parameter

The set parameter values are optimal for trading on the EUR/USD M15 pair.

The results in the strategy tester for September-November 2024 with different Risk level values are shown in the screenshots.

To see how the advisor trades, it is useful to run it in the strategy tester in visualization mode.

", "url": "https://www.mql5.com/it/market/product/26164", "small_icon": "https://c.mql5.com/31/211/gs-trend5-logo-60x60-4102.png", "middle_icon": "https://c.mql5.com/31/438/gs-trend5-logo-140x140-8033.png", "icon": "https://c.mql5.com/31/211/gs-trend5-logo-200x200-5985.png", "rating": 0, "price": 90, "published": 1509546296, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26180, "title": "Simba EA MT5", "description": "

Simba EA is a medium-term EA for MT5 (and MT4).

\r\n

It embeds a basic but effective price breakthrough strategy based on S/R levels.

\r\n

The EA is meant to be used with EURUSD, GBPUSD & USDJPY, whatever the timeframe it'll always perform calculation using M15.

\r\n

Settings

\r\n

Take profit (in points) : 0 to disable it
Trailing stop (in points) : 0 to disable it
Stop loss (in points) : 0 to disable it
Maximum spread : Simba won't open positions if the spread is higher than ...
Time filtering : all time periods there aren't traded

Syntax : <day1>:from1-to1/<day2>:from2-to2

Days are : Mon(day), Tue(sday), Wed(nesday), Thu(rsday), Fri(day), Sat(urday), Sun(day), All (all days)
From & to are : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23 (GMT)
Example 1 - \"Stop trading every Monday from 10 to 12 and every Friday from 14 to 16h GMT\" ---> Mon:10-12/Fri:14-16
Example 2 - \"Trading everyday only from 8h GMT to 22h GMT\" ---> All:0-8/All:22-0

Slippage

\r\n

Recommendations

\r\n

The lower the spread is the better the performance of Simba will be - keep in mind that a spread = 1 + commission roundturn of (3.5*2=7) is like a spread = 8 !
The lower the ping with the broker is, the better the performance of Simba will be
ECN broker, 5-digits, netting & hedging mode
A massive deposit isn't required <=100USD can do it!
Reoptimize to make it suits your own environment
Some months are profitable, others aren't: 3 months at least needed to make yourself a opinion

", "url": "https://www.mql5.com/it/market/product/26180", "small_icon": "https://c.mql5.com/31/211/simba-ea-mt5-logo-60x60-8377.png", "middle_icon": "https://c.mql5.com/31/440/simba-ea-mt5-logo-140x140-7329.png", "icon": "https://c.mql5.com/31/211/simba-ea-mt5-logo-200x200-2165.png", "rating": 0, "price": 0, "published": 1512055896, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26358, "title": "News Hedging Pro MT5", "description": "

News Hedging Pro is a unique robot that allows you to trade during the most critical news announcement periods by your predefined strategy. You can preset the strategy to trade, and then it will trade that news automatically when the news comes. News release gives opportunity to have pips since the price usually has big move at that time. Now with this tool, trading news become easier, more flexible and more exciting than ever. No waiting, no confusing anymore.

Product Links

Fully Description in English : [USER GUIDE] - NEWS HEDGING PRO (MT4/MT5)
Fully Description in Khmer :
For MetaTrader 4 Experts : https://www.mql5.com/en/market/product/23107
For MetaTrader 5 Experts : https://www.mql5.com/en/market/product/26358

Features

✔️ You can start trading during data release by predefined period of Indentation
✔️ You can filter Economic Calendar by 18 countries
✔️ You have 2 Initial Lot Size Method to calculate lot size for initial trade
✔️ You have 8 Initial Entry Method to start initial trade
✔️ You can limit the Upper Border Price and Lower Border Price for initial trade
✔️ EA can automatically adjust the Upper Border Price and Lower Border Price for initial trade
✔️ You can limit Maximal Trades Count
✔️ You can prohibited EA to Open Initial Trade after the bucket of trades finish
✔️ You can prohibited EA to Open Sequence Trades for the bucket of trades
✔️ You have 2 Hedging Strategy
✔️ You have 4 Lot Size Method to calculate lot size for the bucket of trades
✔️ You have 2 Lot Size Procedure to exit the bucket of trades
✔️ You can predefined Maximal Trades Count to switch from First Recovery Phase to be Second Recovery Phase
✔️ You can reduce your hedging trades to follow the market direction
✔️ You can set EA to check the last trade how old it is before open the new trade
✔️ You can limit what days or period in the day to open the new trade
✔️ You can limit Maximal Lot Size Per Trade
✔️ You can set Drawdown Percentage to Lock Account
✔️ You can change Font Size and Line Color
✔️ You can limit Maximal Spread and limit Maximal Slippage

News Hedging Pro is the most powerful Expert Advisor for your hedging trading strategy to trade like a professional trader.

How to Get Started

Make sure you are using the latest version update
Load the EA to any chart and timeframe
Select Economic Calendar on parameter [1]
Predefine news Indentation Period on parameter [4] [5] [8] [9] [12] [13]
Select Initial Lot Size Method on parameter [14]
Select Initial Entry Method on parameter [17]
Limit Upper Border Price on parameter [33]
Limit Lower Border Price on parameter [34]
Enable Open Initial Trade on parameter [35]
Enable Open Sequence Trades on parameter [36]
Predefine During News Release Floating Distance on parameter [37]
Predefine Hedging Distance Initial on parameter [38]
Predefine Hedging Distance Increase on parameter [39]
Select Hedging Strategy on parameter [40]
Select Lot Size Method on parameter [41]
Select Lot Size Procedure on parameter [45]
Limit Maximal Trades Count parameter [46]
Let the EA handle the trades and book a profit for you
Repeat!

The recovery will succeed in most cases and fail in a minority of cases. A strong trend against your trade will cause the EA to take losses.

Usage Tips

Load the EA and trade using the chart buttons
Don't trade any other EA in the same symbol
Take only one initial trade per symbol - never two or more
The EA can trade many symbols independently at the same time
But be careful: never, ever, load the EA twice on the same symbol
There is no need to set a different Magic Number to trade different symbols
Trade from a VPS or leave your trading computer turned on 24/5
Try to never unload the EA to assure the atomicity of the process
Great to trade overbought or oversold situations
Avoid trading against the trend

The purpose of this EA is not to be profitable by itself, but to avoid preventable losses within the limits of the account free margin.

Technical Information

The automated entries of the EA are evaluated at every tick
The EA uses market orders, pending order, variable spreads or fixed spreads
Economic Calendar data release should not be an issue
The EA will trade in any settings, regardless of risk
The Trading Datetime are implemented in Server time
Trades have no individual SL or TP because they are managed as a basket (a single deal)
During a recovery, the EA can have many trades opened at the same time in the same direction

Support and Questions

For questions or timely support. Send a message to me directly : https://www.mql5.com/en/users/cheaponreay01

Good Luck & Happy Trading,

WEALTHTECH - Traders School - Phnom Penh

WEALTHTECH startup in Factory Phnom Penh, the IT and creative hub cultivating the next generation of business, with our high-end trading facility are dedicated for our students to practice their trading activity on the financial market with the superior support from our experienced teachers. We are specialized in market’s liquidity and technology infrastructure, we collaborate with professionals around the world for the purpose of developing and buildup traders community in every corner of the globe.

", "url": "https://www.mql5.com/it/market/product/26358", "small_icon": "https://c.mql5.com/31/873/news-hedging-pro-mt5-logo-60x60-9465.png", "middle_icon": "https://c.mql5.com/31/873/news-hedging-pro-mt5-logo-140x140-2042.png", "icon": "https://c.mql5.com/31/873/news-hedging-pro-mt5-logo-200x200-5171.png", "rating": 0, "price": 30, "published": 1686401704, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26394, "title": "Key Levels of Support and Resistance MT5", "description": "

The indicator displays the key support and resistance levels on the chart.

The significance of these levels lies in that the price may reverse or strengthen the movement when passing such levels, since they are formed as a consequence of the natural reaction of market participants to the price movement, depending on which positions they occupied or did not have time to occupy.

The psychology of the level occurrence: there always those who bought, sold, hesitated to enter or exited early.

If the price bounces off a support level and moves up;

those who bought regret not buying more and think of increasing the lot if the price returns to the level;
those who sold realize they mixed the direction and hope the price returns to the level so that they are able to break even;
those who closed early understand that the price actually goes in \"their\" direction and think of opening positions again if the price returns to the level;
those who were uncertain about the direction and hesitated to enter now see where the price goes, but realize that it is too late and the price has already left; they think of opening positions if the price returns to the level.

That is, all interested participants plan to buy with a rollback to the level.

A rollback to the support level area may provoke a new wave of buys and upward price movement.

If the price breaks the level downwards, the opinion of traders will change radically, and the support level will become a resistance level.

A level is a blurred line, a narrow price range.

The significance of the levels is influenced by: the amount of time the level is formed, the number of touches, the height of the range, the activity of the trade when approaching the level. The levels not touched by the price for a long time gradually lose their significance. Some levels start working again after a breakout or when the price has not tested them for a long time, while they are supposed to be forgotten long ago.

When working with the levels, the following signals are used:

rebound from a level,
level breakout,
rebound from the opposite side a level after a breakout.

The indicator can be used on any timeframe, on the stock, commodity and currency markets;

It can be used for long-term, medium-term and short-term trading.

The indicator is not redrawn.

Settings

History_Size - depth of the calculated history.
Depth - the minimum number of candles, where a second High or Low cannot be formed if the Deviation parameter is met.
Deviation - the minimum number of points, expressed as a percentage between the Highs and Lows of two adjacent candles (this parameter is responsible for the extremes used to search for the levels).
Backstep - the minimum number of candles between the local Highs or Lows (this parameter is responsible for the extremes used to search for the levels).
KWL - (main parameter) level width ratio (percentage, multiplied by two).
This value will be different for different market types and time periods, as it depends on the range of the price fluctuations on the chart.
For example: in Forex, this can be 0.001 on the minute chart and 0.1 on the daily chart.
For stocks (for example: Google), it can be 0.01 on the minute chart and 1.0 on the daily chart.
Points - (main parameter) the number of points (extremums) required to plot a level.
Distance - (main parameter) the maximum distance (expressed in the number of candles) between the points (extremums) used to plot a level.
Strict - (main parameter) strict approach to the formation of levels (the levels are not broken by the price during the formation).
Length - extend the levels to the right by \"x\" candles.
Label_Extremum - type of the extremum labels and their size.
Color_S - color of the support levels.
Color_R - color of the resistance levels.
Width - thickness of the level lines.
Style - style of the level lines.

", "url": "https://www.mql5.com/it/market/product/26394", "small_icon": "https://c.mql5.com/31/214/key-levels-of-support-and-resistance-mt5-logo-60x60-8723.png", "middle_icon": "https://c.mql5.com/31/440/key-levels-of-support-and-resistance-mt5-logo-140x140-9510.png", "icon": "https://c.mql5.com/31/214/key-levels-of-support-and-resistance-mt5-logo-200x200-3792.png", "rating": 0, "price": 110, "published": 1511956384, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26431, "title": "Gap on chart", "description": "

L'indicatore \"Gap on chart\" ti permetterà di vedere le lacune di prezzo sul grafico. I livelli di Gap si estendono nel tempo fino a quando il prezzo non colma il divario di prezzo. L'indicatore consente di regolare la sensibilità : quale dimensione del divario nei punti mostrare e quale profondità della cronologia analizzare.

Per l'uso in trading automatico, usato numerazione del gap LIFO, cioè l'ultima riempire il divario di prezzo è il numero 1.

Regolazioni

InpBars-indica il numero di barre per cercare il divario di prezzo nella storia
Inpmingap-viene indicata la sensibilità al divario di prezzo in punti
InpGapUpColor-specifica il colore di riempimento del divario di prezzo generato dall'aumento del prezzo
InpGapDnColor-specifica il colore di riempimento del divario di prezzo generato quando il prezzo scende
InpDrawFilledGap-indica la necessità di mostrare sul grafico le lacune di prezzo già sovrapposte

", "url": "https://www.mql5.com/it/market/product/26431", "small_icon": "https://c.mql5.com/31/1135/gap-on-chart-logo-60x60-7059.png", "middle_icon": "https://c.mql5.com/31/1135/gap-on-chart-logo-140x140-1203.png", "icon": "https://c.mql5.com/31/1135/gap-on-chart-logo-200x200-3418.png", "rating": 0, "price": 30, "published": 1520958680, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26439, "title": "AccelerationMT5", "description": "

The Expert Advisor has been created for trading on accounts with the deposit of more than $1,000.

\r\n

Uses M1 timeframe.

\r\n

Simultaneously on the recommended pairs: EURUSD, USDJPY, GBPUSD, USDCHF, AUDUSD, USDCAD, NZDUSD, EURAUD, CHFJPY, EURGBP, EURJPY, GBPJPY.

\r\n

Check if your broker supports hedging, since the EA uses hedging based on MACD and RSI.

\r\n

The Expert Advisor enters a position based on MACD and RSI signals.

\r\n

If the price goes in the opposite direction, the EA will open a hedging order and will close the one with a larger profit and the rest following the principle of averaging.

\r\n

Mode - variant 2 enables hedging, variant 1 disables hedging
Exit - set true to enable management of orders, once they are closed no new orders are opened; set false to work in normal mode
Maximal slippage=100 - maximum slippage
hour_stop_at_Friday=0 - close hour on Friday
hour_start_at_Monday=0 - open hour on Monday
Risk_Level(if use risk=true) - lot size in proportion to the account balance (if set to 1, the lot size will be 0.01 up to 10,000; at 20,000 the lot sizer will be 0.02)

", "url": "https://www.mql5.com/it/market/product/26439", "small_icon": "https://c.mql5.com/31/214/accelerationmt5-logo-60x60-3794.png", "middle_icon": "https://c.mql5.com/31/440/accelerationmt5-logo-140x140-1456.png", "icon": "https://c.mql5.com/31/214/accelerationmt5-logo-200x200-8531.png", "rating": 0, "price": 60, "published": 1512564852, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26464, "title": "Panic Meter", "description": "

The indicator measures the frequency of incoming ticks to analyze the market activity. Bullish and bearish ticks are analyzed separately, informing about the currently predominant market sentiment. According to observations, an increase in the frequency of ticks (panic) indicates the beginning of strong price changes, and an increase in the frequency of ticks in a particular direction not only accompanies a price change in this direction, but also often anticipates it.

\r\n

The indicator is indispensable for scalping.

\r\n\r\n

\r\n

Distinctive features

\r\n

Greater sensitivity of the indicator and a small delay. When analyzing ticks, knowing that activity had increased five minutes ago is equivalent to not knowing.
Display as a step chart, which allows seeing the history of frequency changes.
Display of the average frequency for the previous periods, which increase in informativeness of the chart.
Separate display of ascending and descending tick frequencies.

\r\n\r\n

\r\n

Appearance and use

\r\n

The chart recalculates the indication values once a second. All indicator values are expressed in 1/min.

\r\n

The indicator interface consists of the following elements (see Fig. 0):

\r\n

The current value of incoming ticks frequency is displayed on the right of the frequency chart.
The main frequency chart. It visualizes the last ten values of ticks frequency. When the current frequency exceeds the average (see below), which signifies an active market, the chart border becomes green.
The average frequency value of the current period is displayed on the left of the chart and as a gray horizontal level on the chart. It is calculated as the average frequency of ticks for the current 30 minutes over the last 10 days.
The upper limit of the chart scale is displayed in the upper left corner. The charts of all three frequencies have the same vertical scale. Although the frequency values of bullish and bearish ticks are calculated according to a slightly different formula, this value facilitates visual orientation.
The indicator of ascending (bullish) ticks frequency is the left (blue) chart, the numerical value is located to the left of it. The calculation formula involves not only the number of ticks and time, but also the price. Therefore, it would be more correct to call it the frequency of positive price changes in points. If there are significantly more ascending ticks than descending ones (which indicates a strong \"bullish\" sentiment at the moment), the border becomes blue.
The frequency indicator for the descending (bearish) ticks is the right (red) chart. Behavior and calculation are similar to item 5.

\r\n\r\n

\r\n

Input parameters

\r\n

The indicator does not use input parameters and does not require configuration.

\r\n\r\n

\r\n

Launching the indicator

\r\n

Drag the indicator to the desired chart. At startup, the indicator is displayed in the upper left corner, but you can double-click it and move it to the desired location. The indicator needs to receive 15 ticks before it can be visualized (the number of ticks remaining before the start is displayed in the header).

\r\n

Attention! Due to technical limitations, the indicator can not be tested in the visual tester. Please, use the limited version for evaluation.

", "url": "https://www.mql5.com/it/market/product/26464", "small_icon": "https://c.mql5.com/31/215/panic-meter-logo-60x60-3257.png", "middle_icon": "https://c.mql5.com/31/439/panic-meter-logo-140x140-7291.png", "icon": "https://c.mql5.com/31/215/panic-meter-logo-200x200-7381.png", "rating": 0, "price": 0, "published": 1511783167, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26489, "title": "Hunting for Bulls and Bears MT5", "description": "

This indicator is a multitimeframe trading strategy. It has the levels for stop loss, take profit and entry point. The order level can also be set manually.

The indicator uses the regularity of the market, which manifests itself on all instruments, and does not require adjustment of the parameters.

The strategy uses a proprietary approach to determining: trend, volatility, hierarchy of timeframe significance, the size of the history period (the number of candles), which is important for making a trading decision.

The indicator generates a signal after the candle on the current chart is closed:

The higher timeframes are used for calculations. Therefore, sudden changes in the market (within one trading day) may cause the signal to change as the chart is updated, since the candles of the higher timeframes are not closed yet. But due to this the indicator is able to interact with positions that are currently open (it analyzes the most relevant and timely situation on the market).

Settings

take_profit - hide/show the take profit label.
stop_loss - hide/show the stop loss label.
sound - sound alert.
send_mail - send an email notification.
send_notification - send a mobile notification.

", "url": "https://www.mql5.com/it/market/product/26489", "small_icon": "https://c.mql5.com/31/215/hunting-for-bulls-and-bears-mt5-logo-60x60-6780.png", "middle_icon": "https://c.mql5.com/31/445/hunting-for-bulls-and-bears-mt5-logo-140x140-2926.png", "icon": "https://c.mql5.com/31/215/hunting-for-bulls-and-bears-mt5-logo-200x200-9142.png", "rating": 0, "price": 99, "published": 1511426421, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26504, "title": "Spike Finder MT5", "description": "

The EA waits for a spike according to a specific logic and opens a position in spike direction setting stop loss and take profit.

\r\n

When positions are in profit they are managed with smart trailing mechanism based also on elapsed time from opened position.

\r\n

It works with 5-digit and 4-digit broker.

\r\n

Must be used M1 chart.

\r\n

It does not use:

\r\n

Martingale.
Grid.
Hedge.

\r\n

Parameters

\r\n

spikeFilter - value to decide opening positions
takeProfit - take profit in points
stopLoss - stop loss in points
firstTrailStop - first trail stop points
trailStop - trail stop points after first
allowedSpread - max spread allowed to open positions
slippage - slippage set during position opening
SundayTradingInterval - trading interval in Sunday
MondayTradingInterval - trading interval in Monday
TuesdayTradingInterval - trading interval in Tuesday
WednesdayTradingInterval - trading interval in Wednesday
ThursdayTradingInterval - trading interval in Thursday
FridayTradingInterval - trading interval in Friday
tradingOnJan - if true trading active on January
tradingOnFeb - if true trading active on February
tradingOnMar - if true trading active on March
tradingOnApr - if true trading active on April
tradingOnMay - if true trading active on May
tradingOnJun - if true trading active on June
tradingOnJul - if true trading active on July
tradingOnAug - if true trading active on August
tradingOnSep - if true trading active on September
tradingOnOct - if true trading active on October
tradingOnNov - if true trading active on November
tradingOnDec - if true trading active on December
fixedLots - use the lotSize when opening positions (true) or calculate the lot size in this way: (lotSize * AccountEquity) / lotFactor.
lotSize - lot size.
lotFactor - used to calculate lot size in case fixedLots is false.

\r\n

Specific symbol to be traded and parameters in use will be released on monitoring signals.

\r\n

Recommendations

\r\n

Control the risk and work with appropriate volumes (lots) to your capital.

\r\n

Do backtest of good quality (99.9%) if you can.

\r\n

It is recommended to use a low spread broker (true ECN account and/or spread less than 3 pips) and a VPS with low latency.

\r\n

Monitoring Signal: https://www.mql5.com/en/signals/author/piergae

", "url": "https://www.mql5.com/it/market/product/26504", "small_icon": "https://c.mql5.com/31/215/spike-finder-mt5-logo-60x60-3592.png", "middle_icon": "https://c.mql5.com/31/440/spike-finder-mt5-logo-140x140-9762.png", "icon": "https://c.mql5.com/31/215/spike-finder-mt5-logo-200x200-2678.png", "rating": 0, "price": 350, "published": 1513269562, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26574, "title": "The Start", "description": "

Operation principles

\r\n

For the Expert Advisor operation, it is necessary to configure three parameters in accordance with recommendations.

\r\n

The EA works on any timeframe and symbol. The EA analyzes the movement of price beyond a set formed price range, the movement speed and the trend.

\r\n

A position is opened when necessary conditions occur.

\r\n

Parameters

\r\n

Сurrency pair. Recommended values for symbols: five-digit EURUSD in the format 1.00001 – 1, four-digit EURUSD in the format 1.0001 – 2; five-digit GBPUSD in the format 1.00001 – 5; four-digit GBPUSD in the format 1.0001 – 6; three-digit USDJPY in the format 100.001 – 3; two-digit USDJPY in the format 100.01 – 4. Launch optimization in the tester to find the values for other symbols.
Step— the distance in points between orders in the series. Recommended values for symbols: five-digit EURUSD in the format 1.00001 – from 50 to 60, four-digit EURUSD in the format 1.0001 – from 5 to 6; five-digit GBPUSD in the format 1.00001 – from 80 to 90; four-digit GBPUSD in the format 1.0001 – from 8 to 9; three-digit USDJPY in the format 100.001 – from 30 to 45; two-digit USDJPY in the format 100.01 – from 3 to 5. Launch optimization in the tester to find exact values.
Number - magic number. When optimizing in the tester and running on the account, set the parameter to 529463.

", "url": "https://www.mql5.com/it/market/product/26574", "small_icon": "https://c.mql5.com/31/216/the-start-logo-60x60-7245.png", "middle_icon": "https://c.mql5.com/31/440/the-start-logo-140x140-7389.png", "icon": "https://c.mql5.com/31/216/the-start-logo-200x200-6699.png", "rating": 0, "price": 30, "published": 1513785442, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26600, "title": "Profile Map MT5", "description": "

Market Profile helps the trader to identify the behavior if major market players and define zones of their interest. The key feature is the clear graphical display of the range of price action, in which 70% of the trades were performed. Understanding of the location of volume accumulation areas can help traders increase the probability of success. The tool can be used as an independent system as well as in combination with other indicators and trading systems.

\r\n

this indicator is designed to suit the needs of all profile traders. It provides functionality and features to display the market profile on the required number of bars in history.

\r\n

Feature Highlights

\r\n

Possibility to display the market profile on the required number of bars in history.
Display of the profile for the required time period and control from the chart.
Display of the required number of horizontal lines.
Display of the profile at a convenient side.
Graphical display of the profile in the form of a gradient, reflecting the strength of the levels.
Color change of the profile and accumulation center.
Point of control

\r\n

Inputs

\r\n

Volume type - tick or real
Amount of lines - he number of horizontal lines in the profile
Shift the right edge to the newest bar - shifting the right edge/line of the profile
Shift the left edge if the right was shifted - shifting the left edge if the right one is shifted.
Left edge style - the style for the left edge/line
Right edge style - the style for the right edge/line
Right edge color - the color for the right edge/line

", "url": "https://www.mql5.com/it/market/product/26600", "small_icon": "https://c.mql5.com/31/299/profile-map-mt5-logo-60x60-1438.png", "middle_icon": "https://c.mql5.com/31/446/profile-map-mt5-logo-140x140-5474.png", "icon": "https://c.mql5.com/31/299/profile-map-mt5-logo-200x200-9257.png", "rating": 5, "price": 39, "published": 1526457749, "popularity": 0, "category": "Indicator", "votes": 5 }, { "id": 26608, "title": "Trend Sync MT5", "description": "

The indicator shows the trend of 3 timeframes:

\r\n

higher timeframe;
medium timeframe;
smaller (current) timeframe, where the indicator is running.

\r\n

The indicator should be launched on a chart with a timeframe smaller than the higher and medium ones.

\r\n

The idea is to use the trend strength when opening positions. Combination of 3 timeframes (smaller, medium, higher) allows the trend to be followed at all levels of the instrument.

\r\n

The higher timeframes are used for calculations. Therefore, sudden changes in the market may cause the signal to change as the chart is updated, if the candles of the higher timeframes are not closed yet. But due to this the indicator is able to interact with positions that are currently open (it analyzes the most relevant and timely situation on the market).

\r\n

The indicator informs about the synchronous movement of trends on the selected time periods in the settings and about the desynchronization of trends.

\r\n\r\n

\r\n

Settings

\r\n

Type_Arrows - type of arrows.
TF_medium - medium-term timeframe.
TF_long_term - long-term timeframe.
MA_Period - period of the moving average for determining trends.
MA_type - type of the moving average for determining trends.
MA_price - price type used in calculation of the moving average.
only_sound - enable / disable sound alert.
alert - enable / disable alert (sound+dialog).
send_mail - enable / disable email alerts.
send_notification - enable / disable notifications in the mobile terminal.

", "url": "https://www.mql5.com/it/market/product/26608", "small_icon": "https://c.mql5.com/31/217/trend-sync-mt5-logo-60x60-7519.png", "middle_icon": "https://c.mql5.com/31/440/trend-sync-mt5-logo-140x140-9523.png", "icon": "https://c.mql5.com/31/217/trend-sync-mt5-logo-200x200-8112.png", "rating": 0, "price": 89, "published": 1512027239, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26613, "title": "Channel Architect MT5", "description": "

This utility calculates and draws lines over the chart. There are two types of channels:

\r\n

Channel A: the mainline is drawn using local lows for uptrends and local highs for downtrends
Channel B: the mainline is drawn using local highs for uptrends and local lows for downtrends

\r\n

The parallel lines of both types are built using the max. fractal between the base points of the mainline. There are a few conditions, which have to be fullfilled and can be changed by the parameters (see also picture 3):

\r\n

the count of bars to the last base point of a line is called BarAge and has to be greater than the parameter MinBarAge
the length of the line starting at the first base point is measured in bars and has to be greater than MinLength
the ratio of the length between the base points of the mainline and the length of the whole line has to be greater than MinLenfac
the ratio of bars since the line was broken (PostBreak) and the unbroken line length has to be less than MaxPostBreakfac

\r\n

One feature of the utility is that the lines will fade out with incoming bars if they are near the point that they do not fullfill the conditions (e.g. line is broken and PostBreakfac gets too big). That makes it easier to differ the lines. So the next parameters are just for visual effects:

\r\n

LineColor sets the main color of the lines
ColorFadefac represents the color intensity at the point the conditions are scraped through; 0 means main color, 1 means background color
FadeFac is similar to MinLenfac and sets the ratio, when to start the fadeout

\r\n

The indicator works on all currency pairs and timeframes.

", "url": "https://www.mql5.com/it/market/product/26613", "small_icon": "https://c.mql5.com/31/217/channel-architect-mt5-logo-60x60-2010.png", "middle_icon": "https://c.mql5.com/31/439/channel-architect-mt5-logo-140x140-5048.png", "icon": "https://c.mql5.com/31/217/channel-architect-mt5-logo-200x200-4580.png", "rating": 0, "price": 30, "published": 1512462203, "popularity": 0, "category": "Utility", "votes": 0 } ], "total": 24174 }

caratteristiche

cartello

biglietto

Come vengono determinati i lotti?

Confronta con altre versioni di QuickPanel Pro ( link ):

Trading Strategies

Parameters

INPUT

Settings

Strongest and Weakest Currency Analysis

Advantages

Features

Input Parameters

Notes

Please download the setting file and the PDF file of the back test report in the product comment area

Recommendations

Input

Features

Inputs

For EA Developers

Fibonacci calculation

Strategies

Parameters

Description

Working with the indicator

Features

How to Use It

How It Works

Parameters

Inputs

Description

Inputs

Available Indicators

Recommendations

Use suggestion

Parameters

The panel is fully flexible for easy use

User Inputs

Parameters

Description

Recommendations

Inputs Value

Author

Inputs

Inputs

Inputs

Settings

Inputs

What does it do?

What it does not do?

Instructions

Input parameters

Parameters

Configurations

Parameters

Advantages of the indicator

Recommended symbols

Recommendations on usage

Parameters

Parameters Moriarty

Selection of input parameters

EURUSD (investment 50 USD, cent account, use hedge, leverage 1:500)

GBPUSD (investment 50 USD, cent account, use hedge, leverage 1:500)

EURCAD (investment 50 USD, cent account, use hedge, leverage 1:500)

Pairs and timeframes

Parameters

Authors

Settings

Parameters

Indexes of 8 custom currencies

Currencies Pairs

Customization & friendliness

Advantages of the indicator

Recommended symbols

Recommendations on usage

Parameters

Inputs

\r\n\r\nTrading sessions

System messages

Made for Traders of any Level

\r\n\r\n
Trading sessions

Forex Market di robot di trading, indicatori e applicazioni di trading

Prezzo

Quick Panel Pro Hedging

Quick Panel Hedging

Modified TTM Squeeze Indicator MT5

DYJ Follow Me For MT5

Channel FTF MT5

Average True Power MT5

DYJ CashRegister

TSO Top Bottom Divergence MT5

TSO Fibonacci Chains MT5

Time Filter Extended

Color Stochastic with an analytical panel

Fibo Alert Ultimate MT5

Heiken Ashi and Heiken Ashi Smoothed MA MT5

Gekko Jade A Customizable EA

Impro Martin

FFx Basket Scanner MT5

Eagle Scalper MT5

EasyTrades

PowerSignalMT5

Gekko RSI Plus

KVM Bitcoin Price Ticker Pro MT5

AIS Simple Linear Smoothing MT5

Gekko ADX Plus

Mr Big MT5

Gekko Parabolic SAR Plus

Virtual Orders Charting

Break Day Range

PairsTrading MT5

Spadim Order Beep Email Notification

Predicting Donchian Channel MT5

PreMarket Calculations

Exclusive Bollinger MT5

Moriarty MT5

Riona

Splash MT5

Trend Cruiser GT for CADCHF

Currency Index Watcher

Alpha Trend MT5

Pm 42

TSO Signal Builder MT5

TSO Order Recovery MT5

TSO Loss Management Lite MT5

TSO Loss Management MT5

TSO Total Negative Management MT5

Level Alert

CME CallPut Option Ratio MT5

FFx Pivot SR Suite Pro MT5

Jack of all Trades MT5

TSO Top Bottom Divergence MACD MT5

TSO Top Bottom Divergence Momentum MT5

Reversal Expert for MT5

IlanisMT5

SmartArrows

TSO Total Top Bottom Divergence MT5

TSO Moving Average Slope Combination MT5

TSO Price Channel MT5

TSO Bollinger Bandit Strategy MT5

MMM Heiken Ashi

Check Execution

GS Trend5

Simba EA MT5

News Hedging Pro MT5

Key Levels of Support and Resistance MT5

Gap on chart

AccelerationMT5

Panic Meter

Hunting for Bulls and Bears MT5

Spike Finder MT5

The Start

Profile Map MT5

Trend Sync MT5

Channel Architect MT5