{ "from": 2952, "count": 72, "list": [ { "id": 160303, "title": "Gann Square of Nine", "description": "

Here is the full technical and strategic description for the Gann Square of 9 indicator.

Full Name

Gann Square of 9 - Intraday Levels (v2.0)

Overview

This is a mathematical Support & Resistance indicator based on W.D. Gann's \"Square of 9\" theory. Unlike moving averages which lag behind price, this indicator is predictive. It calculates static price levels at the very beginning of the trading day (based on the Daily Open) and projects them forward.

These levels act as a \"road map\" for the day, showing where price is likely to pause, reverse, or accelerate.

The Math (How it Works)

Gann believed that price and time are related geometrically. The algorithm uses the Square Root principle to find the next significant rotation levels.

Baseline: It takes today's Open Price.
Normalization: It converts the price into a \"Gann Number\" (adjusting for decimal points, e.g., turning 1.2000 into 12000).
Rotation Calculation:
- It takes the Square Root of the price.
- It adds or subtracts specific increments corresponding to degrees on a circle:
  - 0.125 = 45°
  - 0.250 = 90° (Quarter Circle)
  - 0.500 = 180° (Half Circle - Major Pivot)
  - 1.000 = 360° (Full Circle - Major Cycle End)
- It squares the result back to get the projected price level.

Visual Guide

🔵 Blue Lines (Resistance / Targets)

These levels are calculated above the Daily Open.

Use: If the market opens and moves UP, these are your Take Profit targets.
Breakout: If a candle closes strongly above a Blue line (especially the 90° or 180° line), it usually signals a continuation to the next level.

🔴 Red Lines (Support / Buy Zones)

These levels are calculated below the Daily Open.

Use: If the market moves DOWN, look for price to bounce at these levels.
Breakdown: If price breaks a Red line, it opens the door to the next lower level.

Key Levels to Watch

Not all lines are equal. In Institutional trading, specific degrees are more important:

90° (Level 2): The first major test. If price breaks this, the trend for the day is often established.
180° (Level 4): The \"Line of Balance.\" Often the maximum range for a normal trading day.
360° (Level 7): The \"Cycle Completion.\" If price hits this in one day, it is an extreme move (limit up/down) and a reversal is highly likely.

", "url": "https://www.mql5.com/it/market/product/160303", "small_icon": "https://c.mql5.com/31/1710/gann-square-of-nine-logo-60x60-4345.png", "middle_icon": "https://c.mql5.com/31/1710/gann-square-of-nine-logo-140x140-8914.png", "icon": "https://c.mql5.com/31/1710/gann-square-of-nine-logo-200x200-1231.png", "rating": 0, "price": 0, "published": 1767287279, "popularity": 0.5091007759891674, "category": "Indicator", "votes": 0 }, { "id": 138277, "title": "ML Levels v2", "description": "

Neural Levels Indicator – Precise AI-Based Market Levels

Unlock next-level trading precision with the Neural Levels Indicator, a powerful market analysis tool built on advanced price-action principles and inspired by cutting-edge neural networks. Instantly identify three key neural trading levels directly on your chart:

Neural Level 1

Purpose: Crucial equilibrium level, ideal for identifying market balance points and potential turning zones.

Neural Level 2 (Optimal Entry)

Purpose: Indicates precise entry opportunities, acting as a high-probability level for initiating trades following corrections.

Neural Level 3 (Optimal Reversal)

Purpose: Highlights critical reversal zones, maximizing potential for market turning points and trend continuation setups.

Why Choose Neural Levels?

Easy & Intuitive: Clearly marked neural-based levels, simplifying your trading decisions.

Highly Accurate: Built on robust price-action and neural modeling.

Fully Customizable: Quickly toggle visibility of each neural level to match your personal strategy.

Who is it for?

Ideal for traders at any level, from beginner to professional, especially those using:

Scalping

Day trading

Swing trading

Price-action trading

Leverage the power of neural-inspired market levels to elevate your trading accuracy and confidence!

Get your Neural Levels Indicator today and trade smarter, not harder!

", "url": "https://www.mql5.com/it/market/product/138277", "small_icon": "https://c.mql5.com/31/1379/ml-levels-v2-logo-60x60-9737.png", "middle_icon": "https://c.mql5.com/31/1379/ml-levels-v2-logo-140x140-6216.png", "icon": "https://c.mql5.com/31/1379/ml-levels-v2-logo-200x200-6157.png", "rating": 0, "price": 0, "published": 1746779265, "popularity": 0.5083105005551846, "category": "Indicator", "votes": 0 }, { "id": 30524, "title": "RSI talking to save your eyes", "description": "

RSI talking, use all your senses while trading!

\r\n

The idea

\r\n

When trading your eyes might be very stressed. Therefore I programmed the RSItalking. Trade what you see and what you hear!

\r\n

Function

\r\n

This indicator says \"rsioverbought\" when rsi is over a threshold value (default 75%) and \"rsioversold\" if it is under a lower threshold (default 25%).

\r\n

When you keep a long position be adviced to realize profit when the indicator tells you \"rsioverbought\" and vice versa.

\r\n

You will find an explanation of the functionality of RSI in youtube.

\r\n

Parameters

\r\n

Period of RSI: Period of RSI, default 14
Upper threshold value: If RSI > threshold the indicator says \"rsi overbought\" (default 75)
Lower threshold value: if RSI < threshold the indicator says \"rsi oversold\" (default 25)

\r\n

Issues and disclaimer

\r\n

No issues were found up to now. If the treshold values are not marked in the window of the indicator it might be, that some old objects named \"trUp\" and \"trDown\" remained and have to be deleted by hand.

\r\n

If you cannot create your own wav sondfiles you can contact me over the mql5 messenger.

\r\n

There is no guarantee for anything using this indicator.

\r\n

14.07.18, Terence V. Gronowski, \"Swisstrader\"

", "url": "https://www.mql5.com/it/market/product/30524", "small_icon": "https://c.mql5.com/31/257/rsi-talking-to-save-your-eyes-logo-60x60-9581.png", "middle_icon": "https://c.mql5.com/31/440/rsi-talking-to-save-your-eyes-logo-140x140-5239.png", "icon": "https://c.mql5.com/31/257/rsi-talking-to-save-your-eyes-logo-200x200-4449.png", "rating": 0, "price": 0, "published": 1532424475, "popularity": 0.5080954115958137, "category": "Indicator", "votes": 0 }, { "id": 119559, "title": "Volume and MarketProfile Pro", "description": "

Volume e MarketProfile Pro

Descrizione:

L'indicatore MarketProfile fornisce un'analisi precisa e dettagliata dei volumi di negoziazione a diversi livelli di prezzo. Calcola e visualizza il profilo dei volumi per ogni giorno di negoziazione, aiutandoti a comprendere la struttura del mercato e la distribuzione dei volumi per prendere decisioni di negoziazione informate.

Caratteristiche principali:

Analisi giornaliera dei volumi: L'indicatore calcola e visualizza il profilo dei volumi per ogni giorno di negoziazione, permettendoti di identificare facilmente la distribuzione dei volumi a diversi livelli di prezzo.
Point of Control (POC): Il POC è visualizzato come una linea orizzontale che indica il livello di prezzo con il maggior volume di negoziazione della giornata, aiutandoti a identificare importanti livelli di supporto e resistenza.
Value Area High (VAH) e Value Area Low (VAL): Queste linee segnano i limiti superiore e inferiore dell'area di valore in cui si verifica il 70% dei volumi di negoziazione. Queste informazioni sono cruciali per comprendere l'attività del mercato e i potenziali punti di inversione dei prezzi.
Colori specifici per sessione: L'indicatore fornisce barre codificate per colore per diverse sessioni di negoziazione (Asia, Europa e America) in modo da poter vedere facilmente in quale sessione si è verificata la maggior parte dell'attività.
Parametri personalizzabili: Puoi regolare il numero di giorni visualizzati, i colori e altri parametri per soddisfare le tue esigenze specifiche e strategie di negoziazione.

Parametri di input:

InpStartDate : Data di inizio per il calcolo.
InpShowDays : Numero di giorni da visualizzare.
InpMultiplier : Moltiplicatore per la lunghezza dell'istogramma.
InpAsiaSession : Colore per la sessione asiatica.
InpEuropeSession : Colore per la sessione europea.
InpAmericaSession : Colore per la sessione americana.
InpPOCColor : Colore per il Point of Control (POC).
InpValueAreaColor : Colore per l'area di valore (VAH e VAL).
InpAsiaStartHour : Ora di inizio della sessione asiatica.
InpEuropeStartHour : Ora di inizio della sessione europea.
InpAmericaStartHour : Ora di inizio della sessione americana.
InpEuropeEndHour : Ora di fine della sessione europea.

Grafici:

POC: Tipo: Linea, Colore: Rosso
VAH: Tipo: Linea, Colore: Blu
VAL: Tipo: Linea, Colore: Blu

Strumenti e periodi di tempo consigliati:

Strumenti: L'indicatore MarketProfile è particolarmente adatto per futures, forex, azioni e indici.
Periodi di tempo: L'indicatore funziona meglio su periodi di tempo intraday come 30 minuti, 1 ora e 4 ore, ma può anche essere utilizzato su periodi di tempo giornalieri.

Guida all'installazione e all'uso passo dopo passo:

Installazione:
- Scarica il file dell'indicatore e salvalo nel terminale MetaTrader 5 sotto MQL5/Indicators .
Aggiunta dell'indicatore al grafico:
- Apri MetaTrader 5.
- Apri la finestra del grafico desiderato.
- Vai alla finestra Navigator e trova \"MarketProfile\" sotto \"Indicators\".
- Trascina e rilascia l'indicatore \"MarketProfile\" nella finestra del grafico.
Regolazione dei parametri di input:
- Apparirà una finestra di impostazioni di input.
- Regola i parametri di input secondo le tue esigenze di negoziazione, inclusa la data di inizio, il numero di giorni visualizzati, i colori delle sessioni e gli intervalli di tempo.
Configurazione dei grafici:
- Nella finestra delle impostazioni di input, fai clic sulla scheda \"Proprietà del disegno\".
- Aggiungi i seguenti grafici:
  - POC: Tipo: Linea, Colore: Rosso
  - VAH: Tipo: Linea, Colore: Blu
  - VAL: Tipo: Linea, Colore: Blu
Analisi:
- Usa i profili di volume visualizzati per identificare i livelli di prezzo chiave, le zone di supporto e resistenza e i punti potenziali di inversione dei prezzi.

Vantaggi:

Approfondimenti di mercato precisi: Ottieni una comprensione dettagliata della distribuzione dei volumi e della struttura del mercato.
Migliori decisioni di negoziazione: Utilizza gli approfondimenti dell'indicatore per migliorare le tue strategie di negoziazione e prendere decisioni informate.
Risparmio di tempo: L'indicatore automatizza l'analisi complessa dei volumi, permettendoti di dedicare più tempo alle decisioni di negoziazione effettive.

Conclusione:

L'indicatore MarketProfile è uno strumento potente per qualsiasi trader serio che cerca di analizzare in profondità la struttura del mercato e la distribuzione dei volumi. Fornisce approfondimenti precisi e preziosi sull'attività del mercato e ti aiuta a ottimizzare le tue strategie di negoziazione per un successo maggiore.

L'indicatore valuta i dati correttamente e con grande precisione, ma non visualizza l'AsiaSession in giallo nell'istogramma. Questo è dovuto alla convalida automatica di MQL5, che non consente di caricare il codice con l'AsiaSession in giallo. Se vuoi vedere anche l'AsiaSession, per favore mandami una e-mail e ti invierò il codice. Entrambi i codici valutano gli stessi dati, è presente solo la differenza visiva.

Contatto:

Se hai domande o hai bisogno di assistenza, non esitare a contattarmi prima dell'acquisto. Sono sempre disponibile per rispondere alle tue domande e aiutarti a sfruttare al massimo l'indicatore MarketProfile. r.aumbaumgartner@gmail.com

", "url": "https://www.mql5.com/it/market/product/119559", "small_icon": "https://c.mql5.com/31/1140/volume-and-marketprofile-pro-logo-60x60-3764.png", "middle_icon": "https://c.mql5.com/31/1140/volume-and-marketprofile-pro-logo-140x140-3446.png", "icon": "https://c.mql5.com/31/1140/volume-and-marketprofile-pro-logo-200x200-3444.png", "rating": 0, "price": 30, "published": 1719943873, "popularity": 0.5077713223530627, "category": "Indicator", "votes": 0 }, { "id": 148451, "title": "Initial Balance Session", "description": " Initial Balance Session
The Initial Balance Indicator is a professional-grade tool for MetaTrader 5 traders, designed to enhance your trading by visualizing key price levels during the Asia, London, and US market sessions. This indicator plots the Initial Balance (IB) range—the high, low, and midpoint prices—formed during the first hour of each session, with a customizable box to highlight the range and optional extension levels for advanced analysis. Optimized for smooth, flicker-free performance, it’s ideal for day traders, scalpers, and swing traders looking to identify critical support, resistance, and breakout zones with precision.

How It Works

The Initial Balance Indicator tracks the price range established during the first hour of three major trading sessions each day:

Asia Session: 01:00–02:00

London Session: 10:00–11:00

US Session: 16:00–17:00

Here’s how it functions:

Plots the Initial Balance Range:

IB High (IBH): The highest price during the session’s first hour.

IB Low (IBL): The lowest price during the session’s first hour.

IB Mid (IBM): The midpoint between IBH and IBL, a key reference for market balance.

Draws Horizontal Lines:

Lines for IBH, IBL, IBM, and extended levels (2x, 3x, 4x the IB range above and below) extend from the session’s start to the next session’s start (e.g., Asia to 09:59, London to 15:59, US to the next day’s Asia start).

Optional midline deviations (1.5x, 2.5x, 3.5x) provide additional price targets.

Highlights the IB Range with a Box:

A customizable rectangle marks the IB range from the session’s start to end, making it easy to spot the price zone where the market established its initial range.

Real-Time Updates:

During an active session, the indicator updates IBH, IBL, and derived levels only when new highs or lows occur, ensuring smooth performance without constant flickering.

Historical Analysis:

Displays IB ranges for up to a user-defined number of past days, perfect for studying historical price behavior.

Optimized Performance:

Version 1.9 eliminates screen flicker and reduces CPU usage by updating lines and boxes only when necessary, providing a seamless trading experience.

Benefits for Traders

Smooth Visuals: Enjoy flicker-free charts with optimized updates, keeping your focus on trading decisions.

Clear Price Levels: Identify key support, resistance, and breakout zones for each session with easy-to-read lines and boxes.

Customizable: Adjust session times, colors, line styles, and visibility options to match your trading strategy.

Multi-Session Support: Covers Asia, London, and US sessions, making it versatile for global markets.

Enhanced Analysis: Use extension levels (2x, 3x, 4x) and midlines (1.5x, 2.5x, 3.5x) to anticipate price targets and reversals.

Efficient and Reliable: Optimized to minimize CPU usage, ensuring fast performance even on lower timeframes.

Input Parameters

Tailor the indicator to your trading needs with these intuitive settings:

Asia IB Start (Default: 01:00): Set the start time for the Asia session’s Initial Balance period (HH:MM, broker’s server time).

Asia IB End (Default: 02:00): Set the end time for the Asia session’s IB period.

London IB Start (Default: 10:00): Set the start time for the London session’s IB period.

London IB End (Default: 11:00): Set the end time for the London session’s IB period.

US IB Start (Default: 16:00): Set the start time for the US session’s IB period.

US IB End (Default: 17:00): Set the end time for the US session’s IB period.

Days to Draw (Default: 5): Choose how many past days’ IB ranges to display (e.g., 5 days shows the last 5 days’ sessions).

Color for IB High (Default: Red): Select the color for the IB High lines.

Color for IB Low (Default: Green): Select the color for the IB Low lines.

Color for IB Mid (Default: Gray): Select the color for the IB Mid lines.

Color for IBH2x, IBH3x, IBH4x and Mids (Default: OrangeRed): Choose the color for extension levels above the IB High (2x, 3x, 4x) and midline deviations (1.5x, 2.5x, 3.5x).

Color for IBL2x, IBL3x, IBL4x and Mids (Default: Blue): Choose the color for extension levels below the IB Low (2x, 3x, 4x) and midline deviations (1.5x, 2.5x, 3.5x).

Style for Main Lines (Default: Solid): Set the line style for IBH, IBL, and IBM (e.g., Solid, Dashed, Dotted).

Style for Extension Lines (Default: Dashed): Set the line style for 2x, 3x, and 4x extension levels.

Style for Midline Deviation Lines (Default: Dotted): Set the line style for 1.5x, 2.5x, and 3.5x midline levels.

Show Midline Deviations (Default: True): Enable or disable the display of midline deviation levels (1.5x, 2.5x, 3.5x).

Show IB Range Box (Default: True): Enable or disable the rectangle highlighting the IB range for each session.

IB Box Border Color (Default: Yellow): Set the border color for the IB range box.

Fill IB Box (Default: True): Choose whether to fill the IB range box with color for better visibility.

IB Box Border Style (Default: Solid): Set the border style for the IB range box (e.g., Solid, Dashed, Dotted).

How to Use

Apply to Chart: Add the indicator to your MetaTrader 5 chart for any symbol and timeframe (recommended: M1, M5, or M15 for precise session tracking).

Customize Settings: Adjust session times to match your broker’s server time zone, and modify colors, styles, and history limits to fit your preferences.

Analyze Key Levels: Use IB High, Low, and Mid lines, along with extension and midline levels, to identify entry, exit, or stop-loss points.

Monitor IB Boxes: The highlighted IB range helps you visualize volatility and potential breakout zones during each session.

Trade Strategically: Combine with your trading strategy to target breakouts, reversals, or range-bound trades during major market sessions.

", "url": "https://www.mql5.com/it/market/product/148451", "small_icon": "https://c.mql5.com/31/1507/initial-balance-session-logo-60x60-5971.png", "middle_icon": "https://c.mql5.com/31/1507/initial-balance-session-logo-140x140-5655.png", "icon": "https://c.mql5.com/31/1507/initial-balance-session-logo-200x200-9320.png", "rating": 0, "price": 50, "published": 1756444911, "popularity": 0.5066569176033264, "category": "Indicator", "votes": 0 }, { "id": 126943, "title": "Pin Bar Detector 382", "description": "

Free for now, price is going to be 30 USD at Jan 1. 2025.
Features:

Pin Bar Detection: The indicator is designed to identify bullish and bearish pin bars based on specific criteria, including the relative size of the candle’s body and shadow, as well as the position of the candle's body in relation to the 38.2% Fibonacci level.

Customizable Labels: Custom text is displayed above each identified bullish or bearish pin bar, such as \"[38.2]\" for bullish and \"[-38.2]\" for bearish, helping traders easily identify the pattern on the chart.

Fibonacci-based Validation: The indicator specifically checks whether the pin bar's body is positioned near key Fibonacci retracement levels (38.2% for bullish and 61.8% for bearish), enhancing the pattern's reliability for price reversal signals.

Dynamic Object Creation: The indicator automatically draws labels (\"38.2\" in green for bullish pin bars and \"-38.2\" in red for bearish pin bars) directly on the chart, making it easier to visually track the signals.

Backtesting Flexibility: The code supports checking historical price data over a user-defined period (using the LookBackBars input parameter), which allows traders to adjust the range of bars to analyze.

Cleanup Function: The indicator automatically deletes previously drawn objects when the chart is changed or when the indicator is removed, ensuring a clutter-free workspace.

Advantages:

Improved Pattern Recognition: By combining pin bar detection with Fibonacci levels, the indicator helps identify potentially strong reversal signals, particularly when price interacts with key retracement levels.

Customization: The custom text labels allow traders to personalize the display of signals, making it easier to spot patterns according to their strategy.

Automation: This indicator automatically identifies and marks pin bars on the chart, reducing manual chart analysis and making it more efficient for traders to spot opportunities.

Clutter-Free Chart: The DeleteAllObjects() function ensures that no leftover objects or labels remain on the chart, keeping the workspace clean and focused only on the relevant signals.

Ease of Use: The simplicity of the code and the use of easily understandable parameters make it accessible even for traders with basic knowledge.

Ideal Use Case:

This indicator is ideal for traders looking to spot potential price reversals based on pin bar candlestick patterns that coincide with Fibonacci retracement levels, enhancing the likelihood of successful trades in trending markets.

What is a \"Pin Bar Pattern\"?

A Pin Bar candlestick pattern is a single-bar pattern that signals a potential reversal in market trends.

It is characterized by a small body and a long wick (or shadow).

The long wick indicates that the price moved significantly in one direction but then reversed and closed near the opening price.

", "url": "https://www.mql5.com/it/market/product/126943", "small_icon": "https://c.mql5.com/31/1231/pin-bar-detector-382-logo-60x60-3349.png", "middle_icon": "https://c.mql5.com/31/1231/pin-bar-detector-382-logo-140x140-9311.png", "icon": "https://c.mql5.com/31/1231/pin-bar-detector-382-logo-200x200-8761.png", "rating": 0, "price": 0, "published": 1732028831, "popularity": 0.5064232085501186, "category": "Indicator", "votes": 0 }, { "id": 158256, "title": "Professional Order Flow vs Volume Analysis", "description": "MM Ultimate Pro Analyzer v10.0 - USER GUIDEBASIC USAGEStep 1: Add to Chart

Open any chart in MetaTrader 5
Go to Navigator → Indicators
Find MM Ultimate Pro Analyzer
Drag it onto your chart
A settings window will appear

Step 2: Configure for Your Timeframe

Choose settings based on what you trade:

Timeframe	NumberOfCandles	VolumeAveragePeriod
M1-M5 (Scalping)	10-20	50
M15-M30 (Day Trading)	5-10	30
H1-H4 (Swing Trading)	3-7	20
D1+ (Position Trading)	3-5	14

Step 3: Understand the Button Bar

At the top of your chart, you'll see 16 toggle buttons:

Row 1:

Table - Shows detailed data table
Panel - Shows summary information
Bubbles - Shows signal icons on chart
Arrows - Shows buy/sell arrows
SmartMoney - Shows institutional activity markers
OrderBlocks - Shows high-volume zones
ValueArea - Shows volume concentration areas
POC - Shows point of control lines

Row 2:

FlowRibbon - Shows buy/sell pressure bars
Gauge - Shows net pressure direction
Wave - Shows CVD trend line
Liquidity - Shows liquidity grab markers
FVG - Shows fair value gaps
BOS - Shows structure breaks
Divergence - Shows divergence markers
Traps - Shows trap warnings

Click any button to toggle that feature on/off (green = on, gray = off)

READING THE DISPLAYSThe Data Table

Shows detailed metrics for each candle:

Time - When the candle closed
Price - Close price
Vol - Total volume (K=thousands, M=millions)
Bid/Ask - Sell/Buy volume breakdown
Delta - Net buying pressure (+) or selling pressure (-)
CVD - Cumulative delta (running total)
Imb - Imbalance ratio and type (B=buy, S=sell)
Abs - Absorption strength percentage
SM - Smart money type detected
VR - Volume ratio (compared to average)
Signal - Buy/Sell arrow

The Information Panel

Shows current candle analysis:

Smart Money Type - What institutional activity is happening
Price & Volume - Current values and ratios
Bid/Ask Split - Percentage of buy vs sell volume
Delta - Net pressure and percentage
CVD - Cumulative delta value
Buy/Sell Bars - Visual pressure gauge
Signal - Main buy/sell recommendation
Alerts - Any special patterns detected

UNDERSTANDING THE SIGNALSSignal Strength Levels

Signal	Strength	What It Means
STRONG BUY ▲▲	70%+	High probability long trade
BUY ▲	50-69%	Moderate buy signal
NEUTRAL ─	<50%	No clear direction
SELL ▼	50-69%	Moderate sell signal
STRONG SELL ▼▼	70%+	High probability short trade

What Creates Strong Signals

The indicator combines multiple factors:

Smart Money Activity - Institutional traders detected
Volume Imbalance - Extreme buy or sell dominance
Volume Absorption - Large volume without price movement
CVD Divergence - Price and volume moving opposite directions
Trap Detection - False breakouts being reversed
Market Structure - Breaks of previous highs/lows

More factors = Stronger signal

KEY VISUAL INDICATORSIcons on Chart

Icon	Color	Meaning
★	Gold	Smart Money activity detected
●	Orange	Liquidity grab (stop hunt)
○	Pink	Sweep pattern
☆	Purple	Volume absorption
▲	Green	Buy signal
▼	Red	Sell signal
⚠	Yellow	Trap warning

Colored Zones

Zone	Color	Meaning
Light Blue	Shaded area	Value Area (high volume zone)
Dark Green	Rectangle	Bullish Order Block
Dark Red	Rectangle	Bearish Order Block
Dark Blue	Rectangle	Fair Value Gap

Lines & Markers

Element	Meaning
Horizontal line	Point of Control (POC)
Yellow marker	Break of Structure
Orange marker	Change of Character
Divergence lines	Price/Volume mismatch

WHAT EACH FEATURE DETECTSSmart Money Detection

What it finds: Institutional traders entering/exiting

Types:

Liquidity Grab - Price spikes to trigger stops, then reverses
Sweep - Breaks previous highs/lows, then reverses
Absorption - Large volume absorbed without price movement
Institutional Volume - Abnormally high volume activity

How to use: Enter trades in the direction of smart money activity

Volume Imbalance

What it finds: Extreme buy or sell dominance at price levels

What it means:

Buy Imbalance = Buyers overwhelming sellers
Sell Imbalance = Sellers overwhelming buyers
Stacked = Multiple levels showing same imbalance

How to use: Trade in direction of the imbalance

Absorption Patterns

What it finds: Large volume that doesn't move price

What it means:

Buy Absorption = Sellers being absorbed (bullish)
Sell Absorption = Buyers being absorbed (bearish)

How to use: Expect reversal opposite to the absorbed volume

CVD (Cumulative Volume Delta)

What it finds: Running total of buying vs selling pressure

What it means:

Rising CVD = Consistent buying pressure
Falling CVD = Consistent selling pressure
Divergence = Price and CVD moving opposite (reversal signal)

How to use: Trade with the CVD trend, watch for divergences

Market Structure (BOS/CHoCH/FVG)

What it finds:

BOS = Break of previous swing high/low
CHoCH = Change of Character (reversal signal)
FVG = Fair Value Gap (price inefficiency)

How to use:

BOS = Trend continuation
CHoCH = Potential reversal
FVG = Price will likely fill the gap

Divergence Detection

What it finds: Price and volume moving in opposite directions

Types:

Regular Divergence = Reversal signal
Hidden Divergence = Continuation signal

How to use: Regular divergence at resistance/support = reversal setup

Trap Detection

What it finds: False breakouts that reverse

Types:

Bull Trap = Breaks above, then drops
Bear Trap = Breaks below, then rises

How to use: Fade the trap (trade opposite direction)

Pulse Detection

What it finds: Multiple consecutive bars with strong directional volume

What it means: Strong momentum in one direction

How to use: Trade in pulse direction for continuation

PRACTICAL TRADING WORKFLOWFor Swing Traders (H1-H4)

Check the Panel - What's the current signal?
Look for Smart Money - Is there a gold star icon?
Confirm with Structure - Is there a BOS or CHoCH?
Check Order Blocks - Are there institutional zones?
Enter on Pullback - Wait for price to retrace to POC or Value Area
Set Stop Loss - Beyond the order block or wick
Target - Previous swing high/low or FVG

For Day Traders (M15-M30)

Identify Bias - Is the signal BUY or SELL?
Find Entry Zone - Look for FVG or Value Area Low/High
Wait for Smart Money - Confirm with liquidity grab or absorption
Enter - On close of confirmation candle
Quick Targets - POC or Value Area boundary
Tight Stops - Use wick as reference

For Scalpers (M1-M5)

Watch for Pulses - Multiple bars same direction
High Volume - Confirm with volume ratio > 2x
Quick Entry - On pulse confirmation
Tight Targets - 5-10 pips or nearest resistance
Immediate Stop - If pulse breaks

CUSTOMIZATION TIPSAdjust Sensitivity

For more signals (more false signals too):

Lower StrongSignalThreshold to 60%
Lower ModerateSignalThresh to 40%
Reduce ImbalanceRatio to 1.3

For fewer signals (miss some trades):

Raise StrongSignalThreshold to 80%
Raise ModerateSignalThresh to 60%
Increase ImbalanceRatio to 2.0

Adjust for Your Market

For Forex (high liquidity):

Increase MMVolumeMultiplier to 3.0
Increase SmartMoneyMinDelta to 50%

For Stocks/Crypto (lower liquidity):

Decrease MMVolumeMultiplier to 2.0
Decrease SmartMoneyMinDelta to 30%

Visual Preferences

Reduce Clutter:

Toggle off unused features
Disable glow/3D effects
Hide neutral bubbles

Enhance Visibility:

Increase IconSize to 3-4
Enable glow effect
Enable 3D effect

COMMON SCENARIOS & WHAT TO DOScenario 1: Strong Buy Signal with Smart Money

What you see:

Panel shows \"STRONG BUY\"
Gold star (Smart Money) appears
Green arrow on chart
Buy imbalance detected

What to do:

Look for pullback to POC or Value Area Low
Enter on close above that level
Stop loss below the wick
Target at previous swing high or FVG

Scenario 2: Absorption Pattern Detected

What you see:

Purple icon (absorption)
Large volume but small candle body
Divergence flag in panel

What to do:

If buy absorption = expect bullish reversal
If sell absorption = expect bearish reversal
Enter on next candle in reversal direction
Stop beyond the absorption zone

Scenario 3: Trap Warning

What you see:

⚠ warning icon
Candle breaks high/low then reverses
High volume on trap candle

What to do:

Fade the trap (trade opposite direction)
Enter on close of reversal candle
Stop beyond the trap wick
Target at previous support/resistance

Scenario 4: Divergence Detected

What you see:

Divergence markers on chart
Price makes new high but volume decreases
Or price makes new low but volume increases

What to do:

Expect reversal at resistance/support
Wait for confirmation candle
Enter opposite to price direction
Stop beyond the divergence point

Scenario 5: FVG Zone Identified

What you see:

Dark blue rectangle (FVG)
Gap between candles
Price approaching the gap

What to do:

Price will likely fill the gap
Enter when price enters FVG
Target opposite side of gap
Stop beyond the FVG zone

BEST PRACTICESDO:

✓ Use multiple timeframes (confirm on higher TF) ✓ Wait for confluence (multiple signals together) ✓ Trade with the smart money direction ✓ Use proper risk management (1-2% per trade) ✓ Keep a trading journal ✓ Test settings on demo first ✓ Trade during liquid hours

DON'T:

✗ Trade every signal (wait for strong ones) ✗ Ignore stop losses ✗ Trade against smart money ✗ Use maximum leverage ✗ Trade during news events ✗ Change settings constantly ✗ Trade illiquid pairs/times

TROUBLESHOOTINGNo signals appearing

Lower the signal thresholds
Check if volume is adequate
Verify market is open
Try reducing SmartMoneyMinDelta

Too many false signals

Raise signal thresholds

Increase ImbalanceRatio

Increase MMVolumeMultiplier
Only trade STRONG signals

Chart is lagging

Increase UpdateIntervalMS to 1000
Reduce NumberOfCandles to 5
Disable glow/3D effects
Hide unused features

Objects not showing

Toggle button twice (off then on)
Check if threshold is too strict
Verify you have enough bars
Restart the indicator

QUICK REFERENCEKey Metrics to Watch

Volume Ratio > 2.5x = Institutional activity
Delta % > 40% = Strong directional conviction
Imbalance Ratio > 2.0 = Extreme dominance
Absorption > 50% = Strong pattern

Signal Strength Factors

Smart Money detected = +35 points
Stacked Imbalance = +20 points
Absorption = +20 points
CVD Divergence = +15 points
High Volume = +8 points

", "url": "https://www.mql5.com/it/market/product/158256", "small_icon": "https://c.mql5.com/31/1707/professional-order-flow-vs-volume-analysis-logo-60x60-8731.png", "middle_icon": "https://c.mql5.com/31/1707/professional-order-flow-vs-volume-analysis-logo-140x140-3503.png", "icon": "https://c.mql5.com/31/1707/professional-order-flow-vs-volume-analysis-logo-200x200-8933.png", "rating": 0, "price": 100, "published": 1765758645, "popularity": 0.5062487800252828, "category": "Indicator", "votes": 0 }, { "id": 55871, "title": "Dual Onset MT5", "description": "

This is the MT5 version.

Get Dual Onset MT4 here

It is an algorithm to detect trend changes early.

You should try multiple values for the Multiplier parameter (1 <value <10 recommended). At first glance you can see effective entries.

This is, in fact, one of the rows that Geleg Faktor initially had. But it was removed because it was no longer needed. The other rows were sufficient for G.Faktor's effectiveness, but I still wanted to share this one.

Always test before using it on your live account so that you fully understand how it works and thus have control over your emotions.

", "url": "https://www.mql5.com/it/market/product/55871", "small_icon": "https://c.mql5.com/31/513/dual-onset-mt5-logo-60x60-6057.png", "middle_icon": "https://c.mql5.com/31/513/dual-onset-mt5-logo-140x140-8271.png", "icon": "https://c.mql5.com/31/513/dual-onset-mt5-logo-200x200-3222.png", "rating": 5, "price": 0, "published": 1601943931, "popularity": 0.5061151651131042, "category": "Indicator", "votes": 4 }, { "id": 41691, "title": "ATR Monitor EA Friendly", "description": "

ATR Monitor

ATR is a measure of volatility introduced by market technician J. Welles Wilder Jr. in his book, \"New Concepts in Technical Trading Systems\".

In general, traders are accustomed to seeing the ATR in the form of a sub-window indicator. What I am presenting here is a simplified version of ATR - just the current ATR number - very useful for monitoring just the very moment of the current chart. And, by default, this indicator will not show up on screen, you can just use the buffers themselves.

FEATURES

Timeframe to monitor (this number will appear in brackets if desired)
ATR period for calculation
Number of decimal places to show up (if applicable)
ATR value to fire up the Maximum threshold
ATR value to fire up the Minimum threshold
ATR update Mode: Candle by Candle; or Real Time
ON SCREEN ATR INFO:
Show ATR information on Screen?
Font size of the ATR Monitor
Font Type
Font Color
Font Size
Text anchor position
Position on screen (X,Y padding)
Preffix and Suffix setting

USAGE

Buffer #0 is responsible for the ATR value.
Buffer #1 is responsible to get the value of (1=ON / 0=OFF) if the Low threshold was reached.
Buffer #2 is responsible to get the value of (1=ON / 0=OFF) if the High threshold was reached.

Since this indicator is highly optimized, only the last ATR number is available, so NO big buffers are used to store ATR numbers. Just read buffers #0, #1 and #2 in its 0 (zero) index that you will get it done!

To ADD more than one indicator in the same chart, just add it to your chart and CHANGE the ATR Period, this way the indicator will create a second version of itself.

If you like this indicator, all I am asking is a little Review (not a Comment, but a REVIEW!)...

This will mean A LOT to me... And this way I can continue to give away Cool Stuff for Free...

With No Strings Attached! Ever!

Live Long and Prosper!

;)

", "url": "https://www.mql5.com/it/market/product/41691", "small_icon": "https://c.mql5.com/31/359/atr-monitor-ea-friendly-logo-60x60-9030.png", "middle_icon": "https://c.mql5.com/31/440/atr-monitor-ea-friendly-logo-140x140-1165.png", "icon": "https://c.mql5.com/31/359/atr-monitor-ea-friendly-logo-200x200-8611.png", "rating": 0, "price": 0, "published": 1567208662, "popularity": 0.5057261734622627, "category": "Indicator", "votes": 0 }, { "id": 62263, "title": "Volume By Color RSJ", "description": "

This simple indicator paints with a darker color on the volume bar when the quantity traded is above the average of select number of periods of the volume itself, highlighting the moments when there was a large volume of deals above the average.

It is also possible to use a configuration of four colors where the color tone shows a candle volume strength.

The indicator defaults to the simple average of 20 periods, but it is possible to change to other types of averages and periods.

If you like this indicator, please do a little review (not a comment, but a REVIEW!), As this is the only way to recognize my work. Thank you very much.

", "url": "https://www.mql5.com/it/market/product/62263", "small_icon": "https://c.mql5.com/31/623/volume-by-color-rsj-logo-60x60-8683.png", "middle_icon": "https://c.mql5.com/31/623/volume-by-color-rsj-logo-140x140-8145.png", "icon": "https://c.mql5.com/31/623/volume-by-color-rsj-logo-200x200-5982.png", "rating": 5, "price": 0, "published": 1613330948, "popularity": 0.5055536438391558, "category": "Indicator", "votes": 2 }, { "id": 49029, "title": "Big Players Last Fight", "description": "

A very useful Price Action point is the previous day Closing VWAP. We call it Big Players Last Fight. This indicator will draw a line showing on your chart what was the last VWAP price of the previous trading session. Simple and effective.

As an additional bonus, this indicator saves the VWAP value on the Public Terminal Variables, so you EA could read easily its value! Just for the \"Prefix + Symbol name\" on the variables list and you will see!

SETTINGS

How many past days back do you want to scan?
VWAP Calculation Type. Classic calculation: TYPICAL = (H+L+C)/3
Volume Type toe used in calculation.
Show feedback error/success message when loading the data from your Broker server.
Name prefix for the lines.
Line Color, style and width.

As always, if you like this indicator, all I am asking is a little Review (not a Comment, but a REVIEW!)...

This will mean A LOT to me... And this way I can continue to give away Cool Stuff for Free...

With No Strings Attached! Ever!

Live Long and Prosper!

;)

", "url": "https://www.mql5.com/it/market/product/49029", "small_icon": "https://c.mql5.com/31/419/big-players-last-fight-logo-60x60-8457.png", "middle_icon": "https://c.mql5.com/31/445/big-players-last-fight-logo-140x140-1332.png", "icon": "https://c.mql5.com/31/419/big-players-last-fight-logo-200x200-2165.png", "rating": 5, "price": 0, "published": 1588003553, "popularity": 0.5053055280440232, "category": "Indicator", "votes": 2 }, { "id": 158404, "title": "Volume Profile Trading System", "description": "

Volume Profile Trading System is NOT just another volume indicator. It's a complete trading ecosystem that combines professional volume profile visualization with an intelligent automated trading strategy. While other indicators show you WHERE volume is concentrated, Volume Profile Trading System shows you WHERE, WHEN, and HOW to trade it! displaying real volume distribution by price instead of time. It helps traders identify fair value zones, institutional activity, and high-probability trade areas with precision.

SPECIAL BONUS OFFER

Every purchase includes our \"VP Breakouts EA\" absolutely FREE - a $97 value! Allowing full automated trading using the same Volume Profile strategies, After purchase send us a message or leave a comment to receive your special free copy.

Note: The Trendline Breakout EA also works with the Volume Profile indicator. If you have already purchased the TLB EA, you will receive a 50% discount on the indicator

User Guide : https://www.mql5.com/en/blogs/post/766301

INDICATOR FEATURES

Dual-Side Display Technology

Left Side: Bars grow rightward with volume numbers
Right Side: Bars grow leftward for mirror effect
Clean, professional layout that doesn't clutter your chart

Smart Volume Distribution

Automatic VAH/ VAL /POC detection
Adjustable value area percentage (70% default)
Real-time volume calculation across bars/sessions/days
Works on Forex, Indices, Crypto, Stocks, Metals, Future

Customizable Visuals

Change colors for POC, VAH, VAL lines
Adjustable ASCII bar width and transparency
Font size and text color customization
Show/hide volume numbers and labels

Flexible Calculation Modes

Bar-based calculation (last X bars)
Session-based (custom time periods)
Daily calculation (current trading day)
Use Volume Profile on any timeframe
Apply multiple Volume Profiles (VP1,VP2...) on the same chart

Professional Tools

Show volume after bars or in separate column
Customizable line widths and styles
Price-level labels with directional arrows

TRADING STRATEGY INCLUDED

Volume Profile Breakout Strategy

Buy when price breaks structure above VAH
Sell when price breaks structure below VAL
Designed for strong trends

Mean Reversion Strategy

Sell at VAH (overbought zone)
Buy at VAL (oversold zone)
Targets return to POC

Smart Retest Strategy

Trade only after breakout and retest
Higher accuracy & reduced drawdown

Adaptive Auto Strategy (Recommended)

Automatically switches strategy based on market condition
Narrow Value Area → Range trading
Wide Value Area → Breakout trading

Volume-Confirmed Entry Strategy

Trades only when volume confirms the move
Filters out false and weak breakouts
Aligns entries with institutional volume flow

Professional Risk Management Strategy

Automatically controls risk on every trade
Adjustable stop loss and take profit
Trade limits and trading hour filters

", "url": "https://www.mql5.com/it/market/product/158404", "small_icon": "https://c.mql5.com/31/1673/volume-profile-trading-system-logo-60x60-3845.png", "middle_icon": "https://c.mql5.com/31/1673/volume-profile-trading-system-logo-140x140-3036.png", "icon": "https://c.mql5.com/31/1673/volume-profile-trading-system-logo-200x200-3870.png", "rating": 0, "price": 59, "published": 1765749079, "popularity": 0.5050226941854613, "category": "Indicator", "votes": 0 }, { "id": 147311, "title": "Dynamic Swing VWAP", "description": "

Dynamic Swing Anchored VWAP è uno strumento prezzo–volume di precisione, progettato per restare rilevante alle condizioni di mercato in tempo reale. A differenza di un VWAP statico che si allontana col passare della sessione, questo indicatore si ancora ai nuovi massimi/minimi swing e si adatta automaticamente alla volatilità.

Risultato → Una traiettoria di valore equo che segue meglio il prezzo, rendendo più facili pullback, retest e opportunità di ritorno alla media.

FUNZIONALITÀ PRINCIPALI
🔹 Ancoraggio agli swing: ogni nuovo pivot reinizia VWAP.
🔹 Motore adattivo: modello di decadimento, i dati recenti pesano di più. APT regola sensibilità.
🔹 Tracking basato su volatilità: stretto in alta volatilità, morbido in bassa.

PERCHÉ È MEGLIO DEL VWAP CLASSICO
Il VWAP tradizionale si discosta dal prezzo.
Dynamic Swing Anchored VWAP: ancoraggio ad eventi + adattività alla volatilità.

COME TRADARLO
📌 Trattarlo come guida dinamica al fair value.
📌 In trend segue meglio il prezzo, offrendo pullback fluidi.

INPUT

Swing Period
APT
Adattamento ATR
Volatility Bias

✅ Funziona su tutti i simboli e timeframe.
✅ Perfetto per scalper, swing e intraday.

", "url": "https://www.mql5.com/it/market/product/147311", "small_icon": "https://c.mql5.com/31/1494/dynamic-swing-vwap-logo-60x60-5924.png", "middle_icon": "https://c.mql5.com/31/1494/dynamic-swing-vwap-logo-140x140-4903.png", "icon": "https://c.mql5.com/31/1494/dynamic-swing-vwap-logo-200x200-5341.png", "rating": 0, "price": 50, "published": 1755481149, "popularity": 0.5049001240299321, "category": "Indicator", "votes": 0 }, { "id": 85927, "title": "TransitGhost", "description": "

TransitGhost Signal indicator, this is one of my best forex trading strategy. The strategy is based on the simple moving average cross, 5 SMA AND 200 SMA of which take a longer time to cross. Whenever the is a cross between the 5 SMA and 200 SMA a signal will be given, when the 5 SMA cross the 200 SMA to the upside ,a buying arrow will appear on chart, and push notification(alert) \"Buy now, use proper risk management\" will be sent on both the MT5 PC and mobile app, and when the 5 SMA cross the 200 SMA to the downside , a Selling arrow will appear on the chart, and push notification (alert) \"Sell now, use proper risk management\" will be sent on both the MT5 PC and mobile app. TransitGhost is made in such a way that it allows user to change the inputs to their own choice. You can input your own periods on both the fast (5 SMA) and slow (200 SMA) moving averages and you can choose to use either Simple Moving Average (SMA), or Exponential Moving Average (EMA), or Smoothed Moving Average (STMA) or Liner Weight Moving Average (LWMA).

Join mql5 transitbk98 channel for more info of transitghost https://www.mql5.com/en/channels/transitbk98

Recommendations

Not for scalping even on smaller timeframes.
Only for swing positions or holding.
Can be used to determine the trend direction.

The price will change every after 15 purchases.

", "url": "https://www.mql5.com/it/market/product/85927", "small_icon": "https://c.mql5.com/31/774/transitghost-logo-60x60-5761.png", "middle_icon": "https://c.mql5.com/31/774/transitghost-logo-140x140-2009.png", "icon": "https://c.mql5.com/31/774/transitghost-logo-200x200-8010.png", "rating": 5, "price": 0, "published": 1662504268, "popularity": 0.5040965781087529, "category": "Indicator", "votes": 1 }, { "id": 53669, "title": "ToolBot Probabilistic Analysis", "description": "ToolBot Probabilistic Analysis - FREE An effective indicator for your negotiations

The toolbot indicator brings the calculation of candles and a probabilistic analysis so that you have more security on your own.

Also test our FREE tops and bottoms indicator: : https://www.mql5.com/pt/market/product/52385#description

Also test our FREE (RSI, ATR, ADX, OBV) indicator: https://www.mql5.com/pt/market/product/53448#description

Try our EA ToolBot for free: https://www.mql5.com/market/product/52347#!tab=overview

NOTE: This indicator does not guarantee profits or make promises of gain, it only provides information that helps the trader to make a better decision.

Inputs

Bars - quantidade de barras a serem contadas.

Show Doji - se os candles Doji devem ser mostrados.

", "url": "https://www.mql5.com/it/market/product/53669", "small_icon": "https://c.mql5.com/31/496/toolbot-probabilistic-analysis-logo-60x60-6184.png", "middle_icon": "https://c.mql5.com/31/496/toolbot-probabilistic-analysis-logo-140x140-2097.png", "icon": "https://c.mql5.com/31/496/toolbot-probabilistic-analysis-logo-200x200-6123.png", "rating": 4, "price": 0, "published": 1598052818, "popularity": 0.503950435860983, "category": "Indicator", "votes": 1 }, { "id": 158147, "title": "StrikeZone Macd Atr", "description": "

StrikeZone Macd Atr is an advanced volatility-adaptive oscillator that scales the traditional MACD using ATR.
This approach solves the common problem of conventional MACD: it does not react properly to changing volatility.
With ATR scaling, momentum becomes clearer, smoother, and more meaningful across all market conditions.

Key Features

1. ATR-Scaled MACD Oscillator

The indicator adjusts (MACD – Signal) by ATR ratio, allowing:

Reduced noise during high-volatility periods
Enhanced sensitivity during low-volatility periods
More consistent momentum visualization across different symbols

2. Color-Coded Fast Signal Line

The fast signal line changes color based on momentum shifts:

Dark Green → Golden-cross zone
Red → Dead-cross zone

A simple color change immediately shows which side has momentum strength.

3. Separate Positive / Negative Histograms

The histogram automatically separates into Up and Down bars,
making trend direction easy to read at a glance.

Why This Indicator?

Standard MACD treats all markets the same.
But instruments like NASDAQ, DAX, Gold, Oil, and Crypto have very different volatility profiles.
As a result, regular MACD often becomes:

Too slow during fast markets
Too noisy during calm markets
Misleading around volatility spikes

With ATR-adaptive scaling, this indicator is ideal for:

Index futures (NAS100, SPX, DAX, HK50)
Volatile FX pairs
Gold and commodities
Crypto (BTC, ETH, etc.)

Recommended Use Cases

Detecting early trend reversals
Identifying momentum expansion or weakness
Filtering out false signals in volatile markets
Entry/Exit confirmation for scalping and day trading
Combining with moving averages, channels, or price action setups

Important Note

This product is an indicator, not an automated trading system.
It does not place trades on its own and should be used alongside your trading strategy.

Support

If you need help configuring or customizing the indicator, feel free to contact us.

", "url": "https://www.mql5.com/it/market/product/158147", "small_icon": "https://c.mql5.com/31/1669/strikezone-macd-atr-logo-60x60-7852.png", "middle_icon": "https://c.mql5.com/31/1669/strikezone-macd-atr-logo-140x140-2660.png", "icon": "https://c.mql5.com/31/1669/strikezone-macd-atr-logo-200x200-3792.png", "rating": 0, "price": 0, "published": 1765508816, "popularity": 0.5030659984807563, "category": "Indicator", "votes": 0 }, { "id": 47104, "title": "TRIXe", "description": "

\r\n The TRIXe Indicator is the combination of the TRIX indicator (Triple Exponential Moving Average) with the addition of an EMA (Exponential \r\n Moving Average) signal. It provides signs of trend continuity and the start of a new trend. \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n The entry and exit points of operations occur when the indicator curves cross. \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n It performs better when combined with other indicators. \r\n

", "url": "https://www.mql5.com/it/market/product/47104", "small_icon": "https://c.mql5.com/31/404/trixe-logo-60x60-1815.png", "middle_icon": "https://c.mql5.com/31/446/trixe-logo-140x140-1814.png", "icon": "https://c.mql5.com/31/404/trixe-logo-200x200-8670.png", "rating": 5, "price": 0, "published": 1583795748, "popularity": 0.5027758765653142, "category": "Indicator", "votes": 3 }, { "id": 99217, "title": "Symbol Strength Meter", "description": "

The seven currencies mentioned are:

GBP (British Pound): This is the currency of the United Kingdom.
AUD (Australian Dollar): This is the currency of Australia.
NZD (New Zealand Dollar): This is the currency of New Zealand.
USD (United States Dollar): This is the currency of the United States.
CAD (Canadian Dollar): This is the currency of Canada.
CHF (Swiss Franc): This is the currency of Switzerland.
JPY (Japanese Yen): This is the currency of Japan.

Currency strength indexes provide a way to assess the performance of a currency relative to others in the foreign exchange market. These indexes can be calculated using various methods, such as comparing exchange rates, trade balances, interest rates, and economic indicators.

By analyzing currency strength indexes, traders and investors can make informed decisions about currency trading and investment opportunities. A stronger currency index suggests that a currency is performing well compared to others, while a weaker currency index indicates relative underperformance.

", "url": "https://www.mql5.com/it/market/product/99217", "small_icon": "https://c.mql5.com/31/888/symbol-strength-meter-logo-60x60-7773.png", "middle_icon": "https://c.mql5.com/31/888/symbol-strength-meter-logo-140x140-7534.png", "icon": "https://c.mql5.com/31/888/symbol-strength-meter-logo-200x200-2169.png", "rating": 5, "price": 0, "published": 1685283142, "popularity": 0.5026950927432196, "category": "Indicator", "votes": 5 }, { "id": 25199, "title": "Fractals ST Patterns Strategy", "description": "

Fractals ST Patterns Strategy is a modification of Bill Williams' Fractals indicator. It allows setting any number of bars to find a fractal. This simple indicator corresponds to the parameters specified in the ST Patterns Strategy (https://stpatterns.com/). Structural Target Patterns are essentially the market itself, which is consistently divided into components. To form ST Patterns, no trend lines, geometric proportions of the model itself, trading volume or open market interest are needed. They are easily recognized and built solely on the basis of breaking through the fractal levels and the distance to the Target. ST Patterns remove the uncertainty from the market, which is inherent in the previously known graphic compositions, and simplify the work of the trader.

The fractal consists of two sets of arrows - up (upper fractals) and down (lower fractals). Each fractal satisfies the following conditions:

Upper fractal - maximum (high) of a signal bar exceeds or is equal to maximums of all bars from the range to the left and to the right;
Lower fractal - minimum (low) of a signal bar is less or equal to minimums of all bars from the range to the left and to the right.

Input parameters

Bars around - the number of bars before and after the central bar.
Arrow offset - visual offset of the arrow from the bar's High/Low in points.

You can set the arrows' color and size separately for upper and lower fractals in the Colors tab.

", "url": "https://www.mql5.com/it/market/product/25199", "small_icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-60x60-8522.png", "middle_icon": "https://c.mql5.com/31/445/fractals-st-patterns-strategy-logo-140x140-6380.png", "icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-200x200-1619.png", "rating": 5, "price": 0, "published": 1504615640, "popularity": 0.5025165611859452, "category": "Indicator", "votes": 1 }, { "id": 152436, "title": "Supertrend Analysis Dashboard", "description": "

Supertrend Analysis Dashboard (Multi-Timeframe Edition)

Advanced Real-Time Trend, Volatility & Risk Analysis Tool for Smart Traders

Short Description

A professional multi-timeframe Supertrend indicator with a real-time analytical dashboard, risk alerts, pullback zones, and higher-timeframe confirmation system — all visualized directly on the chart.

Full Description

Supertrend Analysis Dashboard is a next-generation indicator that combines Supertrend logic, multi-timeframe confirmation, and risk management intelligence into one visual trading system.

Unlike traditional Supertrend tools, this indicator interprets market structure in real time — revealing the story behind every trend: its direction, strength, duration, volatility, and risk level.

Built for traders who value clarity, precision, and structure, this dashboard provides the information you need to make confident, disciplined trading decisions.

Key Features

Multi-Timeframe Trend Confirmation

• Reads and displays Supertrend direction from two higher timeframes (e.g. H1 & H4).

• Detects contradictions between current and higher-timeframe trends.

• Keeps your trades aligned with the dominant market bias.

Real-Time Analytical Dashboard

• Displays trend direction, strength, duration, price action, and volatility.

• Auto-interprets market data into human-readable insights.

• Clean visual design — adjustable position, color, and font.

Smart Alerts System

• Pullback Alerts – signals when price enters ideal BUY or SELL retracement zones.

• Breakout Alerts – detects and announces real-time trend reversals.

• Supports Push Notifications, Popup, and Sound Alerts.

• Never miss a quality setup again.

Built-In Risk Management Engine

• Evaluates distance from Supertrend and trend maturity automatically.

• Classifies risk as LOW, MODERATE, MEDIUM, or HIGH.

• Warns when price is over-extended or contradicts higher-timeframe bias.

Dynamic Pullback Zones

• Plots automatic pullback lines depending on trend direction.

• Upper zone for bullish trends, lower zone for bearish ones.

• Customizable color, style, and line width.

Interactive Chart Controls

• On-chart SHOW / HIDE button to toggle the dashboard panel.

• Fully customizable background, border, and text colors.

• Clean and responsive layout that adapts to any chart setup.

Volatility & Momentum Analyzer

• Uses ATR-based volatility calculations in real time.

• Displays volatility percentage and distance from Supertrend in pips & %.

• Helps you identify quiet vs. explosive market conditions.

Lightweight & Universal

• Works on all symbols and timeframes.

• Optimized for performance — minimal CPU load even with multiple MTF checks.

• Fully customizable to match your trading style.

Why Traders Love It

✔ Combines Supertrend, MTF analysis, and risk control in one tool.

✔ Converts raw chart data into clear, actionable insights.

✔ Helps traders avoid poor entries and focus on high-probability zones.

✔ Ideal for scalpers, swing traders, and trend followers who trade with discipline.

Final Thoughts

Supertrend Analysis Dashboard is not just another indicator — it’s your personal market analyst that reads, explains, and visualizes the story behind every trend.

“Trade with clarity. Analyze with precision. Manage with confidence.”

", "url": "https://www.mql5.com/it/market/product/152436", "small_icon": "https://c.mql5.com/31/1557/supertrend-analysis-dashboard-logo-60x60-6387.png", "middle_icon": "https://c.mql5.com/31/1557/supertrend-analysis-dashboard-logo-140x140-8851.png", "icon": "https://c.mql5.com/31/1557/supertrend-analysis-dashboard-logo-200x200-5901.png", "rating": 0, "price": 0, "published": 1760237995, "popularity": 0.5013663680339389, "category": "Indicator", "votes": 0 }, { "id": 143325, "title": "Heatmap Indicator", "description": "

🔥 XAUUSD Heat Map Scalping Indicator 🔥

Perfect for 1M, 3M, 5M, 15M Scalping on Gold (XAUUSD)

Take your scalping to the next level with this exclusive Heat Map indicator, designed and optimized specifically for XAUUSD.

This tool is a powerful visual assistant that helps you instantly identify market strength, pressure zones, and potential entry points in real time.

✅ Key Features:

⚡ Optimized for Fast Scalping: Works best on 1-minute, 3-minute, 5-minute, and 15-minute timeframes
🎯 Specialized for XAUUSD: Precision-calibrated for the volatility and structure of gold trading
🌡️ Real-Time Heat Map Visualization: Instantly spot hot zones where price action is likely to react
🔍 Buyer vs Seller Strength Detection: Analyse momentum and pressure with color-coded intensity
📉 Clear Signal Zones: Identify high-probability reversal and breakout areas
🚀 No Lag – Instant Updates: Built for speed and reactivity in fast-moving markets

🎓 Who is this for?

Scalpers who trade XAUUSD on lower timeframes
Traders who want a visual edge in the market
Anyone who needs fast, precise market sentiment confirmation

💡 Note: This indicator is developed specifically for XAUUSD only and is not intended for other currency pairs or symbols.
🎉 Have fun and enjoy the power of this indicator – may your trades be accurate and profitable! 💰

", "url": "https://www.mql5.com/it/market/product/143325", "small_icon": "https://c.mql5.com/31/1446/heatmap-indicator-logo-60x60-5162.png", "middle_icon": "https://c.mql5.com/31/1446/heatmap-indicator-logo-140x140-9332.png", "icon": "https://c.mql5.com/31/1446/heatmap-indicator-logo-200x200-5224.png", "rating": 0, "price": 40, "published": 1751722270, "popularity": 0.5012442286221421, "category": "Indicator", "votes": 0 }, { "id": 113015, "title": "Time Levels for MT5", "description": "

The indicator is designed for displaying the following price levels on the chart:

Previous day's high and low.
Previous week's high and low.
Previous month's high and low.

Each of the level types is customizable. In the indicator settings, you set line style, line color, enable or disable separate levels.

Configurations

----Day-------------------------------------------------
DayLevels - enable/disable previous day's levels.
WidthDayLines - line width of daily levels.
ColorDayLines - line color of daily levels.
StyleDayLines - line style of daily levels. The parameter only works if WidthDayLines =1.
DayFontSize - font size for the daily level labels.
----Week------------------------------------------------
WeekLevels - enable/disable previous week's levels.
WidthWeekLines - line width of weekly levels.
ColorWeekLines - line color of weekly levels.
StyleWeekLines - line style of weekly levels. The parameter only works if WidthWeekLines =1.
WeekFontSize - font size for the weekly level labels.
----Month-----------------------------------------------
MonthLevels - enable/disable previous month's levels.
WidthMonthLines - line width of monthly levels.
ColorMonthLines - line color of monthly levels.
StyleMonthLines - line style of monthly levels. The parameter only works if WidthMonthLines =1.
MonthFontSize - font size for the monthly level labels.
----Settings-----------------------------------------------
GMThour - terminal time zone.
WriteComments - show text comments featuring level values.

", "url": "https://www.mql5.com/it/market/product/113015", "small_icon": "https://c.mql5.com/31/1058/time-levels-for-mt5-logo-60x60-6280.png", "middle_icon": "https://c.mql5.com/31/1058/time-levels-for-mt5-logo-140x140-6077.png", "icon": "https://c.mql5.com/31/1058/time-levels-for-mt5-logo-200x200-9127.png", "rating": 1, "price": 0, "published": 1707922878, "popularity": 0.5008821287923774, "category": "Indicator", "votes": 1 }, { "id": 80356, "title": "KTrade Data Statistics MT5", "description": "

Transaction Data Analysis Assistant:

This is a statistical analysis tool for transaction data, and there are many data charts for analysis and reference.

language:

Support language selection switch (currently supports Chinese and English active recognition without manual selection)

The main window shows:

Balance display
Total profit and loss display
Now the position profit and loss amount is displayed
Now the position profit and loss ratio is displayed
The total order volume, total lot size, and profit and loss of buy and sell orders are displayed.
Position usage ratio display
According to the estimated loss points that the current position can bear
(Click the lower right corner to zoom) Daily order volume, lot size, profit and loss statistics
(click the lower right corner to zoom) the current week's profit and loss data
(click the lower right corner to zoom) the current month's profit and loss data
(Click the lower right corner to zoom) Profit and loss data of the current year

Transaction data statistics area:

Detailed order statistics, (you can choose by day, week, month, quarter, year) (by variety, identification code) (detailed statistics of existing positions)
Profit/Loss/Lots/Number of Transactions Histogram
Long/Short Position Time/Profit Level Situation
Multi-currency profit times/profit level distribution
Balance equity curve/balance curve/profit curve, etc. (Note: Loading the balance equity curve may take a certain amount of data processing time, please wait patiently for the loading to complete...)
Profit and loss histogram for each order
Multi-currency pair profit graph
Data Statistical Analysis Report
About version updates

Any questions, suggestions, welcome to communicate.

", "url": "https://www.mql5.com/it/market/product/80356", "small_icon": "https://c.mql5.com/31/725/ktrade-data-statistics-mt5-logo-60x60-2969.png", "middle_icon": "https://c.mql5.com/31/725/ktrade-data-statistics-mt5-logo-140x140-6595.png", "icon": "https://c.mql5.com/31/725/ktrade-data-statistics-mt5-logo-200x200-5067.png", "rating": 4.6666665, "price": 0, "published": 1649960419, "popularity": 0.5002768004344669, "category": "Indicator", "votes": 3 }, { "id": 131545, "title": "Breakout Binary Option", "description": "

Initialize RSI with period 2 above the closing price.

Initialize EMA with period 20 above the closing price.

Buy condition:

RSI < 15 (oversold).

Closing price of 4 consecutive candles > EMA (uptrend).

Place BUY signal at the bottom of the candle.

Sell condition:

RSI > 85 (oversold).

Closing price of 4 consecutive candles < EMA (downtrend).

Place SELL signal at the top of the candle

", "url": "https://www.mql5.com/it/market/product/131545", "small_icon": "https://c.mql5.com/31/1291/breakout-binary-option-logo-60x60-5116.png", "middle_icon": "https://c.mql5.com/31/1291/breakout-binary-option-logo-140x140-6195.png", "icon": "https://c.mql5.com/31/1291/breakout-binary-option-logo-200x200-3850.png", "rating": 0, "price": 0, "published": 1738644119, "popularity": 0.4999775415296897, "category": "Indicator", "votes": 0 }, { "id": 133968, "title": "Local Currency Converter Indicator MT5", "description": "

UzFx-Local Currency Converter-MT5 è un indicatore potente e facile da usare, progettato per i trader che desiderano monitorare i propri profitti e perdite (P&L) giornalieri e variabili sia in USD che nella propria valuta locale. Questo strumento fornisce una conversione in tempo reale utilizzando un tasso di cambio definito dall'utente, aiutando i trader a visualizzare le proprie prestazioni di trading in modo più efficace.

Caratteristiche principali

Visualizza i profitti e le perdite correnti in USD e nella valuta locale.

Calcolo giornaliero dei profitti e delle perdite: tiene traccia dei profitti e delle perdite delle operazioni chiuse per il giorno corrente.

Converte i profitti e le perdite nella valuta locale desiderata (ad esempio, PKR, INR, AED, ecc.).

Personalizzazione del tasso di cambio: imposta manualmente il tasso di cambio per una conversione accurata.

Monitoraggio del limite di perdita giornaliero: avvisa quando viene raggiunto il limite di perdita giornaliero.

Reimpostazione automatica a mezzanotte: il P&L giornaliero si reimposta automaticamente ogni giorno di negoziazione.

Posizionamento dell'interfaccia utente regolabile: modifica la dimensione dei caratteri, il colore e il posizionamento sul grafico.

Perché utilizzare questo indicatore?

Evita inutili conversioni manuali ed errori di calcolo.

Fornisce una visione chiara e strutturata dei profitti delle operazioni in corso e chiuse.

Garantisce una migliore gestione del rischio monitorando i limiti di perdita giornalieri.

Nota: l'indicatore non esegue operazioni di trading, ma serve esclusivamente per il monitoraggio del P&L e la conversione di valuta.

", "url": "https://www.mql5.com/it/market/product/133968", "small_icon": "https://c.mql5.com/31/1336/local-currency-converter-indicator-mt5-logo-60x60-7269.png", "middle_icon": "https://c.mql5.com/31/1336/local-currency-converter-indicator-mt5-logo-140x140-8851.png", "icon": "https://c.mql5.com/31/1336/local-currency-converter-indicator-mt5-logo-200x200-1675.png", "rating": 0, "price": 0, "published": 1741527969, "popularity": 0.4999759344096841, "category": "Indicator", "votes": 0 }, { "id": 92715, "title": "Trend Range Indicator", "url": "https://www.mql5.com/it/market/product/92715", "small_icon": "https://c.mql5.com/31/830/trend-range-indicator-logo-60x60-3430.png", "middle_icon": "https://c.mql5.com/31/830/trend-range-indicator-logo-140x140-1411.png", "icon": "https://c.mql5.com/31/830/trend-range-indicator-logo-200x200-1863.png", "rating": 5, "price": 0, "published": 1674218716, "popularity": 0.499972578573616, "category": "Indicator", "votes": 1 }, { "id": 139455, "title": "Bollinger Bands Pure Sound Alert No Plots", "description": "

Forex 17 – Bollinger Bands Pure Sound Alert No Plots genera avvisi sonori quando il prezzo supera la banda superiore o inferiore delle Bollinger Bands. Suoni distinti segnalano i breakout rialzisti e ribassisti, aiutando a identificare condizioni potenzialmente di ipercomprato o ipervenduto.

Questa versione senza grafici non disegna elementi visivi sul chart. I parametri configurabili includono periodo, deviazione e intervalli tra gli avvisi. L’approccio solo sonoro è ideale per mantenere i grafici puliti.

Tradotto con l’aiuto dell’IA.

", "url": "https://www.mql5.com/it/market/product/139455", "small_icon": "https://c.mql5.com/31/1397/bollinger-bands-pure-sound-alert-no-plots-logo-60x60-5862.png", "middle_icon": "https://c.mql5.com/31/1397/bollinger-bands-pure-sound-alert-no-plots-logo-140x140-3128.png", "icon": "https://c.mql5.com/31/1397/bollinger-bands-pure-sound-alert-no-plots-logo-200x200-7051.png", "rating": 0, "price": 0, "published": 1747946407, "popularity": 0.4998832828871747, "category": "Indicator", "votes": 0 }, { "id": 157411, "title": "Swing Points Liquidity", "description": "

Product Description: Swing Points & Liquidity (MT5)

What it does:
This indicator automatically identifies significant \"Swing Highs\" and \"Swing Lows\" (Fractals) on your chart. It assumes that these points represent Liquidity (where Stop Losses and Buy/Sell stops are resting) or Supply and Demand Zones.

When a Swing High is formed, it projects a Red Box/Line to the right (Supply/Resistance).
When a Swing Low is formed, it projects a Green Box/Line to the right (Demand/Support).
As price moves forward, these lines extend until price touches (\"fills\") them, at which point the liquidity is considered \"taken\" or the zone \"mitigated.\"

Key Features & Inputs Explanation

When you drag the indicator onto your chart, you will see the Inputs tab. Here is how to configure them:

1. Swing Settings (Sensitivity)

Bars Right (inpSwingSizeR): The number of bars after a high/low needed to confirm it.
- Usage: Higher numbers (e.g., 10+) mean fewer, stronger zones. Lower numbers (e.g., 3-5) mean more zones, but they might be weaker.
Bars Left (inpSwingSizeL): The number of bars before the high/low that must be lower/higher.

2. Display Settings (Visuals)

Show Boxes: Draws the rectangular Supply/Demand zone.
Show Lines: Draws a straight line from the exact pivot price.
Show Labels (Bubbles): Puts a small dot above/below the swing point to mark the exact origin.
Extend Until Fill:
- True: The zone keeps stretching to the right until Price touches it.
- False: The zone stays short (mostly for visual backtesting).

3. Conditions (Filtering)

Hide Filled (inpHideFilled): (Important Feature)
- True: Once price touches the line/box, it disappears from the chart. This keeps your chart clean and shows only \"fresh\" levels.
- False: It keeps the old broken zones visible (ghost zones).
Volume > (inpVolTresh): Filters out swing points that happened on low volume. (e.g., if you set this to 500, swings formed on bars with <500 ticks won't show).

4. Appearance

Colors: You can customize the Red (Sell/Liquidity) and Green (Buy/Support) colors to match your chart theme.
Box Width: Controls how \"thick\" the rectangle is.

How to Use It for Trading

Here are three common ways to trade using this Product/Indicator:

Strategy A: The Retest (Supply & Demand)

Wait for a Swing Point to form and the indicator to draw a Box.
Wait for price to move away, leaving the box \"open.\"
Entry: When price returns to the box later, look for a reversal candle.
Why: You are trading the \"Unfilled\" order blocks.

Strategy B: Liquidity Runs (Targeting)

If you are already in a trade, look at the Lines generated by this indicator.
Target: Use the nearest opposing Swing Point line as your Take Profit.
Why: Market makers often push price to these levels to trigger stop losses (Liquidity) before reversing.

", "url": "https://www.mql5.com/it/market/product/157411", "small_icon": "https://c.mql5.com/31/1655/swing-points-liquidity-logo-60x60-8841.png", "middle_icon": "https://c.mql5.com/31/1655/swing-points-liquidity-logo-140x140-1424.png", "icon": "https://c.mql5.com/31/1655/swing-points-liquidity-logo-200x200-7732.png", "rating": 0, "price": 40, "published": 1764872859, "popularity": 0.4992824111790963, "category": "Indicator", "votes": 0 }, { "id": 77486, "title": "SC MTF Rate of Change for MT5 with alert", "description": "

Highly configurable Rate of Change (ROC) indicator.

Features:

Highly customizable alert functions (at levels, crosses, direction changes via email, push, sound, popup)
Multi timeframe ability
Color customization (at levels, crosses, direction changes)
Linear interpolation and histogram mode options
Works on strategy tester in multi timeframe mode (at weekend without ticks also)
Adjustable Levels

Parameters:

ROC Timeframe: You can set the current or a higher timeframes for ROC.
ROC Bar Shift: you can set the offset of the line drawing
ROC period: ROC parameter.
Stepless (Linear Interpolation): Turn on/off the linear interpolation (with multi timeframe mode on lower timeframe).
Show Indicator Levels: Turn on/off the level showing.
Adjust Level of ROC: Adjust the ROC levels.
Enable or Disable All Alert Functions: Turn on/off all alert functions.
Enable alerts for middle level: Turn on/off alert functions for middle level.
Alert if... : You can enable/disable various alert events (for crosses, direction changes at after candle closed/before candle closes).
Specify a short message for you to identify which indicator is alerting: Specify a short message for you to identity which indicator alerted.
Alert via email: Switchable alert mode.
Alert via push notification: Switchable alert mode.
Alert via popup window: Switchable alert mode.
Alert with sound: Switchable alert mode.
Choose sound file for sound alert: Select sound file for sound alert.
Color mode: Switchable color mode (Simple Color, Only direction, Direction with levels, Only Levels)
Draw ROC line in histogram mode: Draws ROC Line with line or histogram mode.
Color 1 of ROC line, Color 2 of ROC line, Color 3 of ROC line, Color 4 of ROC line: Set colors.
Width of ROC line: Style setting.
Style of ROC line: Style setting.

", "url": "https://www.mql5.com/it/market/product/77486", "small_icon": "https://c.mql5.com/31/698/sc-mtf-rate-of-change-for-mt5-with-alert-logo-60x60-5485.png", "middle_icon": "https://c.mql5.com/31/698/sc-mtf-rate-of-change-for-mt5-with-alert-logo-140x140-9311.png", "icon": "https://c.mql5.com/31/698/sc-mtf-rate-of-change-for-mt5-with-alert-logo-200x200-5236.png", "rating": 0, "price": 0, "published": 1643820650, "popularity": 0.49820945538721323, "category": "Indicator", "votes": 0 }, { "id": 155831, "title": "MultiTF Candle Delta Monitor", "description": "

MultiTF Candle Delta Monitor

— Multi-Timeframe Difference Panel (Visualizing candle changes as numeric values)

Overview:

Monitor candle differences across multiple timeframes in a compact numeric panel. Each row represents a timeframe, and each cell shows the recent close-to-close difference (pips/ticks). Blue = upward, Red = downward, Gray = no change. Since it uses label rendering only, it is lightweight and does not interfere with the chart.

Key Features:

- Multi-timeframe support (M1, M5, M15, M30, H1, H4, D1; each timeframe can be toggled ON/OFF)

- Color-coded numeric display for intuitive recognition of direction and momentum

- Symbol-specific multiplier settings (FX, metals, crypto, custom instruments)

- Compact overlay panel (main chart or subwindow selectable)

- Flexible scaling with auto/manual multiplier switching

Input Parameters:

- XOffset, YOffset: panel position offset from the selected corner

- RowGap, Spacing: vertical row gap and horizontal spacing for history

- FontSize: label font size

- subwindow: 0 = main chart, >0 = target subwindow

- UseAutoMultiplier (true/false): auto detection or manual setting

- PipMultiplier: manual multiplier when auto is disabled

- ShowM1…ShowD1: per-timeframe visibility toggles

- BARS_COUNT: number of history bars (e.g., last 10 candles)

How It Works:

- Retrieves close prices for each timeframe

- Difference = |Close[n] − Close[n+1]| scaled by _Point and multiplier

- Renders past N bars plus the current candle’s difference as numeric labels

- Disabled timeframes are deleted → rows compress neatly without gaps

- The rightmost column always shows the latest candle difference

Use Cases:

- Scalping: focus on M1–M15 to check short-term momentum

- Swing trading: monitor M30–H4 to grasp medium- to long-term trends

- Discretionary filter: require multi-timeframe agreement before entries/exits

Notes:

- For best visibility, turn off chart display and use this as a dedicated panel

License / Distribution:

Free release. Provided as a supplementary tool.

", "url": "https://www.mql5.com/it/market/product/155831", "small_icon": "https://c.mql5.com/31/1625/multitf-candle-delta-monitor-logo-60x60-1297.png", "middle_icon": "https://c.mql5.com/31/1625/multitf-candle-delta-monitor-logo-140x140-3653.png", "icon": "https://c.mql5.com/31/1625/multitf-candle-delta-monitor-logo-200x200-2242.png", "rating": 0, "price": 0, "published": 1763557449, "popularity": 0.49721881451333266, "category": "Indicator", "votes": 0 }, { "id": 80977, "title": "Cybertrade Bollinger Bands", "description": "

Cybertrade Double Bollinger Bands - MT5

The Bollinger Bands indicator shows the levels of different highs and lows that a security price has reached in a given duration and also their relative strength, where the highs are close to the upper line and the lows are close to the lower line.

Our differential is to present this indicator in a double form, with the availability of its values to simplify automation.

It works on periods longer than the period visible on the chart.

All values are available in the form of buffers to simplify possible automations.

This indicator is the same one we use in our EA.

Also check out our other products.

", "url": "https://www.mql5.com/it/market/product/80977", "small_icon": "https://c.mql5.com/31/730/cybertrade-bollinger-bands-logo-60x60-4040.png", "middle_icon": "https://c.mql5.com/31/730/cybertrade-bollinger-bands-logo-140x140-7733.png", "icon": "https://c.mql5.com/31/730/cybertrade-bollinger-bands-logo-200x200-3413.png", "rating": 0, "price": 0, "published": 1651152632, "popularity": 0.49721587821768665, "category": "Indicator", "votes": 0 }, { "id": 108432, "title": "AliSessions", "description": "

AliSession Highlight is an indicator that highlights a specific period of time according to your preferences.

It can help you gain a clear vision of price movements into a specific session, the range of a session, and also to easily identify the high and low of the session.

You can use it on any currency pairs, indices, and any timeframes.

Settings:

Start Hour: Set the hour to initiate the session highlight.
Start Min: Set the minute for the start of the session highlight.
End Hour: Specify the end hour for the session highlight.
End Min: Specify the end minute for the session highlight.
Background Color: Choose any color for the session highlight to match your template.
Session High Color: Choose a color for the highest point of the session.
Session Low Color: Choose a color for the lowest point of the session.
Session High/Low Line Width: Adjust the width of the lines representing the highest and lowest points.

Enjoy!

", "url": "https://www.mql5.com/it/market/product/108432", "small_icon": "https://c.mql5.com/31/998/alisessions-logo-60x60-9951.png", "middle_icon": "https://c.mql5.com/31/998/alisessions-logo-140x140-4783.png", "icon": "https://c.mql5.com/31/998/alisessions-logo-200x200-8970.png", "rating": 5, "price": 0, "published": 1699956170, "popularity": 0.49715222954847327, "category": "Indicator", "votes": 2 }, { "id": 45897, "title": "RsiCrossSma", "url": "https://www.mql5.com/it/market/product/45897", "small_icon": "https://c.mql5.com/31/394/rsicrosssma-logo-60x60-2552.png", "middle_icon": "https://c.mql5.com/31/441/rsicrosssma-logo-140x140-4771.png", "icon": "https://c.mql5.com/31/394/rsicrosssma-logo-200x200-2478.png", "rating": 5, "price": 0, "published": 1580307172, "popularity": 0.49587230234545665, "category": "Indicator", "votes": 2 }, { "id": 157129, "title": "Volatility Exhaustion", "description": "Indicatore Volatility Exhaustion

Descrizione per gli utenti

Volatility Exhaustion è un indicatore unico che utilizza una tecnologia speciale di analisi della volatilità. Identifica i momenti critici nel mercato quando l'attività corrente raggiunge livelli estremi rispetto ai dati storici.

Caratteristiche principali:

Interpretazione semplice: L'indicatore utilizza un sistema di segnale binario
Versatilità: Funziona su qualsiasi timeframe e strumento
Efficacia: Particolarmente utile nei mercati laterali e di tendenza
Chiarezza visiva: Separazione chiara dei segnali per colore

Visualizzazione:

🔵 Barre dell'istogramma blu (altezza 10): Segnale di maggiore attività di mercato - momento favorevole per l'ingresso
🔴 Barre dell'istogramma rosse (altezza 10): Periodo di bassa attività - si consiglia di astenersi dal trading
Assenza di barre: Dati insufficienti per l'analisi

Specifiche tecniche

Parametri di input:

Period (predefinito: 14): Lunghezza del periodo storico analizzato (predefinito 14 barre per l'analisi)
Factor (predefinito: 1.5): Coefficiente di sensibilità del segnale (1.5 livello di soglia di sensibilità)

Buffer dell'indicatore:

Buffer 0 (blu): Contiene il valore 10 in presenza di segnale, 0 in assenza
Buffer 1 (rosso): Contiene il valore 10 in assenza di segnale, 0 in presenza
Buffer 2 e 3: Buffer di calcolo interno (non utilizzati per il trading)

Connessione all'Expert Advisor

// Dichiarazione di variabili globali\r\nint handle_volatility_exhaustion = INVALID_HANDLE;\r\ndouble signal_buffer[];\r\n\r\n// Nella funzione OnInit()\r\n//+------------------------------------------------------------------+\r\n//| Funzione di inizializzazione dell'Expert                         |\r\n//+------------------------------------------------------------------+\r\nint OnInit()\r\n{\r\n    // Reimpostare tutti gli errori GetLastError()\r\n    ResetLastError();\r\n\r\n    handle_volatility_exhaustion = iCustom(_Symbol, _Period, \"Volatility Exhaustion.ex5\",\r\n        14,    // Period\r\n        1.5    // Factor\r\n    );\r\n\r\n    if(handle_volatility_exhaustion == INVALID_HANDLE)\r\n    {\r\n        Print(\"Errore nel caricamento dell'indicatore Volatility Exhaustion: \", GetLastError());\r\n        return INIT_FAILED;\r\n    }\r\n\r\n    ArraySetAsSeries(signal_buffer, true);\r\n\r\n    return(INIT_SUCCEEDED);\r\n}

", "url": "https://www.mql5.com/it/market/product/157129", "small_icon": "https://c.mql5.com/31/1650/volatility-exhaustion-logo-60x60-2048.png", "middle_icon": "https://c.mql5.com/31/1650/volatility-exhaustion-logo-140x140-8576.png", "icon": "https://c.mql5.com/31/1650/volatility-exhaustion-logo-200x200-4731.png", "rating": 0, "price": 0, "published": 1764676782, "popularity": 0.4948708027546501, "category": "Indicator", "votes": 0 }, { "id": 97690, "title": "Session colored Bars with High Low", "description": "

You may find this indicator helpfull if you are following a session based strategy. The bars are colored according to the sessions. Everything is customisable.

Settings:

+ Asia Session: zime, color, high, low

+ London Session: zime, color, high, low

+ US Session: zime, color, high, low

Please feel free to comment if you wish a feature and/or give a review. Thanks.

", "url": "https://www.mql5.com/it/market/product/97690", "small_icon": "https://c.mql5.com/31/868/session-colored-bars-with-high-low-logo-60x60-8122.png", "middle_icon": "https://c.mql5.com/31/868/session-colored-bars-with-high-low-logo-140x140-9752.png", "icon": "https://c.mql5.com/31/868/session-colored-bars-with-high-low-logo-200x200-4871.png", "rating": 4.8333335, "price": 0, "published": 1682617489, "popularity": 0.4944222355126932, "category": "Indicator", "votes": 6 }, { "id": 72420, "title": "Multi currency RSI", "description": "

RSI Scanner, Multiple Symbols and Timeframes, Graphical User Interface

An indicator that scans multiple symbols added from the market watch and timeframes and displays result in a graphical panel.

Features:

Multi symbol
Multi timeframe
Alerts and Notifications
Live Monitoring
Sorting modes
One click to change symbol and timeframe
Inputs for RSI and scanner settings

", "url": "https://www.mql5.com/it/market/product/72420", "small_icon": "https://c.mql5.com/31/654/multi-currency-rsi-logo-60x60-5059.png", "middle_icon": "https://c.mql5.com/31/654/multi-currency-rsi-logo-140x140-9442.png", "icon": "https://c.mql5.com/31/654/multi-currency-rsi-logo-200x200-6947.png", "rating": 0, "price": 0, "published": 1632763542, "popularity": 0.49437483347664507, "category": "Indicator", "votes": 0 }, { "id": 60813, "title": "CandlestickForMt5", "description": "

CANDLESTICK_MT5

A very interesting indicator of candlestick patterns, converted from the free version of the CANDLESTICK indicator for the MetaTrader4 terminal to the version for the MetaTrader5 terminal. In addition to candlestick patterns, it draws support and resistance lines, which are perfectly worked out by the price on the chart. It can work on any timeframe. Has simple settings.

When converting, the logic of work and the design of the original CANDLESTICK indicator for the MT4 terminal were preserved as much as possible.

", "url": "https://www.mql5.com/it/market/product/60813", "small_icon": "https://c.mql5.com/31/557/candlestickformt5-logo-60x60-4994.png", "middle_icon": "https://c.mql5.com/31/557/candlestickformt5-logo-140x140-2622.png", "icon": "https://c.mql5.com/31/557/candlestickformt5-logo-200x200-9482.png", "rating": 5, "price": 0, "published": 1610973938, "popularity": 0.49166480746994806, "category": "Indicator", "votes": 9 }, { "id": 144792, "title": "GEN Support and Resistance Pivot", "description": "

PRO VERSION https://www.mql5.com/en/market/product/144989?source=Site

https://www.mql5.com/en/users/gedeegi/seller

GEN Support & Resistance (EGGII77) is an MT5 indicator that automatically detects and draws Support & Resistance levels based on pivot highs and lows. The indicator features two sets of S&R (main structure and quick levels), a customizable maximum number of lines, adjustable colors, and a clean chart display for clearer price action analysis.

", "url": "https://www.mql5.com/it/market/product/144792", "small_icon": "https://c.mql5.com/31/1461/gen-support-and-resistance-pivot-logo-60x60-4212.png", "middle_icon": "https://c.mql5.com/31/1461/gen-support-and-resistance-pivot-logo-140x140-4096.png", "icon": "https://c.mql5.com/31/1461/gen-support-and-resistance-pivot-logo-200x200-8667.png", "rating": 0, "price": 0, "published": 1753077046, "popularity": 0.491644582504195, "category": "Indicator", "votes": 0 }, { "id": 133036, "title": "Gann Bar Counting", "description": "

Gann Bar Counting - Identifies the Candle Sequence

Description:
The \"Gann Bar Counting\" indicator is designed to identify bullish and bearish candle sequences according to the Gann counting methodology. This approach helps detect continuation or reversal patterns, providing a clear view of the market structure.

Indicator Conditions:

Bullish Sequence: A green dot is placed above the candle if:

The current high is greater than the high of the previous candle.
The current low is greater than the low of the previous candle.

Bearish Sequence: A red dot is placed below the candle if:

The current low is lower than the low of the previous candle.
The current high is lower than the high of the previous candle.

Other Conditions: If none of the previous conditions are met, the indicator replicates the last drawn dot (green or red) adjusting it to the new candle.

Key Features:

Clear visual identification: Displays green dots above bullish candles and red dots below bearish candles, making it easy to read price sequences.
Automatic pattern detection: The indicator analyzes real-time price conditions and marks changes in market structure.
Adaptability to any time frame: Works on all timeframes (M1, M5, H1, D1, etc.) and any available financial asset on MetaTrader 5.

Easy Interpretation:

Green dot: The price is forming a bullish sequence (each high and low is higher than the previous one).
Red dot: The price is forming a bearish sequence (each high and low is lower than the previous one).

Recommended Use:

Identify potential entry points in the direction of the prevailing trend.
Confirm breakouts or continuations of patterns.
Complement trading strategies based on technical analysis.

Advantages of the \"Gann Bar Counting\" Indicator:

Enhances the interpretation of price structures.
Facilitates decision-making in trend and reversal trading.
Ideal for traders who follow Gann methodologies or price action strategies.

", "url": "https://www.mql5.com/it/market/product/133036", "small_icon": "https://c.mql5.com/31/1309/gann-bar-counting-logo-60x60-7656.png", "middle_icon": "https://c.mql5.com/31/1309/gann-bar-counting-logo-140x140-2665.png", "icon": "https://c.mql5.com/31/1309/gann-bar-counting-logo-200x200-1146.png", "rating": 0, "price": 0, "published": 1740391225, "popularity": 0.4905149389733247, "category": "Indicator", "votes": 0 }, { "id": 20734, "title": "Mirror controller for MT5", "description": "

The new version of MirrorSoftware 2021 has been completely rewriten and optimized.
This version requires to be loaded only on a single chart because it can detect all actions on every symbol and not only the actions of symbol where it is loaded.
Even the graphics and the configuration mode have been completely redesigned.

The MirrorSoftware is composed of two components (all components are required to work):

MirrorController (free indicator):

This component must be loaded into the MASTER account. (The choice to write this component as an indicator is because there is no limit to the number of indicators that can be loaded on a chart and because it does not create any problem if you load it on an account logged with the Investor password);

You can download:

MT4 version;
MT5 version;

MirrorEA (expert advisor):

This component must be loaded into unlimited SLAVE account and it executes the actions of configured symbols.
The connections type that the MirrorEA supports are:

MT4 to MT4;
MT4 to MT5 hedge;
MT4 to MT5 net;
MT5 hedge to MT4;
MT5 hedge to MT5 hedge;
MT5 hedge to MT5 net;
MT5 net to MT4;
MT5 net to MT5 hedge;
MT5 net to MT5 net;

You can Download:

MT4 version;
MT5 version;

Demo Video

* See the demo video for details

Settings of MirrorСontroller

In the Window settings for each action, you can choose a audio voice among 4 predefined ones (David, Peter, Mary, Jennifer) for the events alerts: *

Settings of MirrorEA

In the \"Options\" tab:

Open charts of other symbols; *
Total drawdown %; *
Close positions; *
Delete orders; *

In the \"Notifications\" tab:

You can enable notifications on your mobile device; *

In the \"Voice events\" tab:

For each action, you can choose a audio voice among 4 predefined ones (David, Peter, Mary, Jennifer) for the events; *

In the \"Symbols\" tab:

You can add any symbol you decide to copy from the MASTER accounts. Each symbol can be configured in to the Settings window;

In the \"Settings\" window:

In the \"Filters\" tab of symbol settings you can set the follow options:

Buy, Buy limit, Buy stop; *
Sell, Sell limit, Sell stop; *
Invert actions; *
Copy exit positions; *
Copy stoploss, Copy takeprofit; *
Copy actions with magic; *
Copy actions without magic; *
Copy actions with comment; *
Copy actions without comment; *
Perform actions previously transmitted to the symbol connections; *
Only alert; *
Slippage entry (Deviation entry on MT5 version); *
Slippage exit (Deviation exit on MT5 version); *
Timeout seconds; *
Emergency stop loss; *
Pending mode (Place orders (not synchronized), Not place orders (synchronized)); *

In the \"Money management\" tab you can set the follow options:

Max size; *
Size calculation mode (Ratio of balance, Ratio of size, Larry Williams formula, Fix size); *

In the \"Schedule\" tab settings you can set the follow options:

Stop copy; *
Close positions; *
Delete orders; *
Intraday trading periods; *

Features

The MirrorSoftware copies any action, manually or automatically executed (also on account logged with investor password);
You can execute any action on orders and positions on SLAVE account only;
You do not need DLLs or other external applications;
The symbol names between different brokers are not a problem;
You can manage any SLAVE symbol independently;
You can set an emergency stoploss for any single positions;
You can set a total drawdown value;

", "url": "https://www.mql5.com/it/market/product/20734", "small_icon": "https://c.mql5.com/31/161/mirror-controller-for-mt5-logo-60x60-8084.png", "middle_icon": "https://c.mql5.com/31/440/mirror-controller-for-mt5-logo-140x140-7439.png", "icon": "https://c.mql5.com/31/161/mirror-controller-for-mt5-logo-200x200-8346.png", "rating": 3, "price": 0, "published": 1487230161, "popularity": 0.4904019331850766, "category": "Indicator", "votes": 1 }, { "id": 115836, "title": "Higher Timeframe Candles MT5", "description": "

Higher Timeframe Chart Overlay will display higher timeframe candles, including the number of candles high/low you specify.
You no longer need to switch timeframes to check the candles. Everything can be shown in one chart.

Get Full Version - https://www.mql5.com/en/market/product/115682

Please feel free Contact me if you have any questions regarding this tool.

", "url": "https://www.mql5.com/it/market/product/115836", "small_icon": "https://c.mql5.com/31/1093/higher-timeframe-candles-mt5-logo-60x60-3622.png", "middle_icon": "https://c.mql5.com/31/1093/higher-timeframe-candles-mt5-logo-140x140-7727.png", "icon": "https://c.mql5.com/31/1093/higher-timeframe-candles-mt5-logo-200x200-3126.png", "rating": 4, "price": 0, "published": 1712846106, "popularity": 0.4899626584267185, "category": "Indicator", "votes": 2 }, { "id": 30264, "title": "Ultimate Double Top Bottom Scanner MT5 FREE", "description": "

This indicator scans for you up to 15 trading instruments and up to 21 time frames for occurrences of the high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

For double tops with fake breakouts the highest price of the right shoulder must be higher than the left shoulder. For double bottoms with fake breakouts the lowest price of the right leg must be lower than the left leg.

\r\n

These special Double Tops/Bottoms are created by the smart money to accumulate its own position size. With the fake breakout the smart money traps as much traders on the wrong side of the market as possible. Then the smart money reverses the direction very sharply. The trapped traders are in panic and exit their position or even reverse their position. This makes the reversal very strong and profitable. The indicator detects exactly these games of the smart money and therefore gives you high probability entry signals.

\r\n

This FREE Version of the Scanner scans only EURUSD and GBPUSD. The full version of the scanner can be found here: Ultimate Double Top Bottom Reversal Scanner

\r\n

Please read also the blog post \"Professional Trading With Double Tops/Bottoms And Divergences!\" which explains the concepts behind the ULTIMATE Double Top/Bottom indicator and how you can use a professional top-down approach.

\r\n

You can get alerts via MetaTrader 5, email and push notifications at the moment when a signal occurs on any timeframe and any trading instrument you have configured.

\r\n

You need to install this indicator on only one single chart. The indicator then scans up to 15 instruments and 21 time frames automatically for you! Of course, if you want to scan more than 15 instruments then you can add the scanner to another chart and scan more trading instruments.

\r\n

Important

\r\n

The purpose of this indicator is to alert signals so that you will be able to trade these signals even with a normal day job. Therefore, on live charts you will only see the dashboard view as shown in the video. This indicator will NOT draw signals on live charts.

\r\n

If you need the signals visible on live charts, then you can additionally purchase the Ultimate Double Top Bottom Reversal Indicator

\r\n

Parameters

\r\n

alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\" signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\" signals for short entries
alertsViaMT5: True = Yes, False = No - if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email
alertsViaPush: True = Yes, False = No - if true, then the indicator gives alerts direct to your mobile phone
alertsM1 - alertsMN1: True = Yes, False = No - if true, then the indicator searches for \"Double Top/Bottom\" signals on the appropriate time frame e.g. M1, M2 and so on. You can define which time frames will be checked.
templateName: - if you press a button on the chart (which contains the name of an instrument), then the appropriate chart will open and a template with the specified name will be attached
checkEveryXSeconds - every X seconds, the indicator checks the next instrument/timeframe for the occurrence of a \"Double Top/Bottom\" signal
i1-i2 - EURUSD and GBPUSD which will be monitored/checked for the occurrence of a \"Double Top/Bottom\" signal

", "url": "https://www.mql5.com/it/market/product/30264", "small_icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-free-logo-60x60-1505.png", "middle_icon": "https://c.mql5.com/31/446/ultimate-double-top-bottom-scanner-mt5-free-logo-140x140-2911.png", "icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-free-logo-200x200-1619.png", "rating": 1, "price": 0, "published": 1530896449, "popularity": 0.48910782266197717, "category": "Indicator", "votes": 1 }, { "id": 30086, "title": "VR Atr Pro MT5", "description": "

VR ATR Pro è un indicatore tecnico progettato per determinare livelli target basati sull'analisi statistica dei periodi di trading precedenti. Si basa sul calcolo matematico del movimento medio dei prezzi in un periodo di tempo selezionato.

Principio di funzionamento dell'indicatore, basato sulla statistica

Il funzionamento dell'indicatore si basa sull'osservazione del comportamento giornaliero del prezzo: ogni periodo di trading è caratterizzato da una certa ampiezza di movimento — il prezzo percorre una certa distanza in punti sia verso l'alto che verso il basso dal punto di apertura.

Allo stesso modo, si può supporre che all'inizio di ogni nuovo periodo di trading, il prezzo abbia una \"autonomia\" condizionale... attraverso un semplice calcolo matematico viene determinato il valore medio... Questo valore medio non è una garanzia, ma serve come riferimento, indicando la probabile entità del movimento nel periodo corrente.

Pertanto, l'indicatore applica questo principio: analizza le fluttuazioni storiche dei prezzi in un periodo di tempo selezionato, calcola il valore statistico medio e visualizza i livelli sul grafico. Ciò consente al trader di comprendere la forza e la \"autonomia\" dello strumento finanziario per il periodo corrente.

Visualizzazione dell'indicatore

L'indicatore visualizza due livelli sul grafico:

Livello Superiore — obiettivo calcolato per il movimento rialzista.
Livello Inferiore — obiettivo calcolato per il movimento ribassista.

Inoltre, i livelli possono essere visualizzati come aree, il che consente di tenere conto della deviazione e ottenere un intervallo di prezzi target.

Caratteristiche principali

I segnali vengono fissati al termine del periodo e successivamente non vengono modificati.
Funziona con varie classi di attività: coppie di valute (Forex), metalli, indici (CFD), futures e criptovalute.
Può essere applicato su qualsiasi intervallo di tempo.
Consente di configurare la visualizzazione di livelli esatti o zone.
Supporta l'invio di notifiche tramite messaggi push sullo smartphone, e-mail e alert standard del terminale.
Versioni funzionalmente identiche sono disponibili per MetaTrader 4 e MetaTrader 5.

Applicazione pratica

L'indicatore può essere utilizzato come strumento di supporto per:

Identificare possibili aree per il posizionamento di ordini Take Profit e Stop Loss.
Valutare il potenziale del movimento dei prezzi all'interno di una strategia di trading esistente.
Filtrare le condizioni di mercato: il raggiungimento del livello calcolato può servire come segnale di esaurimento della forza del movimento attuale.

Raccomandazioni

Il periodo di calcolo dell'indicatore (Indicator calculation timeframe) deve essere maggiore del Timeframe su cui opera l'indicatore.
Il periodo migliore per calcolare l'indicatore è il Periodo PERIOD_D1.
Utilizzare l'indicatore insieme al proprio sistema di trading.
Posizionare il Take Profit all'interno dei livelli e lo Stop Loss al di fuori dei livelli.
Utilizzare un periodo di calcolo (Indicator calculation period) maggiore di 10 per ottenere risultati più precisi.
Nel caso in cui il prezzo superi uno dei livelli, si consiglia di interrompere il trading fino al prossimo periodo di trading.

VR ATR Pro è uno strumento di qualità per valutare il potenziale intervallo di movimento dei prezzi. La sua logica si basa sull'analisi della volatilità storica, consentendo un approccio oggettivo per determinare livelli target. Come qualsiasi strumento analitico, richiede la comprensione dei suoi principi di funzionamento.

Impostazioni dell'indicatore

[+] === Main Settings === [+] - Impostazioni principali;

Indicator calculation period - Periodo di calcolo dell'indicatore
Number of periods to display - Numero di periodi da visualizzare
Indicator calculation timeframe - Timeframe per il calcolo dell'indicatore
Show text labels - Mostra etichette di testo
Display type - Tipo di visualizzazione

Percentage for area - Percentuale per l'area
Show achieved targets - Mostra obiettivi raggiunti
Show potential number of points - Mostra numero potenziale di punti

[+] === Current Period Settings === [+] - Impostazioni del periodo corrente;

Current uptrend figure color - Colore della figura di tendenza al rialzo corrente
Current uptrend figure line style - Stile linea della figura di tendenza al rialzo corrente
Current uptrend figure line thickness - Spessore linea della figura di tendenza al rialzo corrente
Fill current uptrend figure - Riempimento figura di tendenza al rialzo corrente
Current downtrend figure color - Colore della figura di tendenza al ribasso corrente
Current downtrend figure line style - Stile linea della figura di tendenza al ribasso corrente
Current downtrend figure line thickness - Spessore linea della figura di tendenza al ribasso corrente
Fill current downtrend figure - Riempimento figura di tendenza al ribasso corrente

[+] === Settings of periods in history === [+] - Impostazioni dei periodi storici;

Uptrend figure color - Colore della figura di tendenza al rialzo
Uptrend figure line style - Stile linea della figura di tendenza al rialzo
Uptrend figure line thickness - Spessore linea della figura di tendenza al rialzo
Fill uptrend figure with color - Riempimento figura di tendenza al rialzo con colore
Downtrend figure color - Colore della figura di tendenza al ribasso
Downtrend figure line style - Stile linea della figura di tendenza al ribasso
Downtrend figure line thickness - Spessore linea della figura di tendenza al ribasso
Fill downtrend figure with color - Riempimento figura di tendenza al ribasso con colore

[+] === Other === [+] - Altro;

Text size - Dimensione testo
Prefix - Prefisso

Versione per: MetaTrader 4

Il tuo feedback è il miglior ringraziamento per noi! Lascia una recensione.

Maggiori informazioni in blog.

", "url": "https://www.mql5.com/it/market/product/30086", "small_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-60x60-3798.png", "middle_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-140x140-2956.png", "icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-200x200-4625.png", "rating": 4.75, "price": 30, "published": 1529949418, "popularity": 0.48909440730395537, "category": "Indicator", "votes": 4 }, { "id": 55931, "title": "GG Time To Trade", "description": "

Time to Trade

Trading timing indicator is based on market volatility through 2 ATR indicators to determine the timing of a transaction. The indicator determines the times when the market has strong volatility in trend. When histogram is greater than 0 (blue) is a strong market, when histogram is less than 0 (yellow) is a weak market. Should only trade within histograms greater than 0.

Based on the histogram chart, the first histogram value is greater than 0 and the second histogram appears, this is the definite time to trade. Combine with other indicators to identify buy or sell trades.

Signals are broadcast alerts and sent to the phone

Indicator for MT4

Feedback for improvement is appreciated. If you feel good and effective, please share with your friends and review the product. Thanks for your attention.

", "url": "https://www.mql5.com/it/market/product/55931", "small_icon": "https://c.mql5.com/31/514/gg-time-to-trade-logo-60x60-9821.png", "middle_icon": "https://c.mql5.com/31/514/gg-time-to-trade-logo-140x140-1669.png", "icon": "https://c.mql5.com/31/514/gg-time-to-trade-logo-200x200-9463.png", "rating": 0, "price": 0, "published": 1602054311, "popularity": 0.48886692949569677, "category": "Indicator", "votes": 0 }, { "id": 123204, "title": "Rsi Ema Engulfing Bar V3", "description": "

This MT5 alert is designed to identify potential buying opportunities based on several technical indicators and price action patterns. Here's how it works:

Buy Conditions

1. RSI Condition:

The Relative Strength Index (RSI) for the current period is below a specified low threshold (RsiLow). This indicates oversold conditions.

2. Candlestick Pattern:

It checks for a specific candlestick pattern across three consecutive candles:

- The current candle (1) closes higher than it opens (bullish)

- The previous candle (2) closes lower than it opens (bearish)

- The current candle's close is above the open of the previous candle

- The current candle's close is below the high of the previous candle

3. Moving Average Conditions:

- The current candle's close is below the EMA (Exponential Moving Average)

- A longer-term EMA (Shiftpast) is below a shorter-term EMA (Shiftnow), indicating a potential uptrend

- Ability to change previous shift of the moving average rise and fall- numbers 5-6 for a buy 5 is above 6 , meaning 5 bars ago the ema ID5 was above ID6 - Change to 3-4 or 7-9 or 10-13

4. Buy Signal:

If all conditions are met, the alert generates a \"Buy\" signal with an up arrow at the low of the current candle.

This alert is designed to identify potential bullish/bearish reversal setups. It looks for oversold conditions (low RSI) combined with a specific candlestick pattern that suggests buying pressure is starting to overcome selling pressure. The moving average conditions help confirm the overall trend direction.

", "url": "https://www.mql5.com/it/market/product/123204", "small_icon": "https://c.mql5.com/31/1183/rsi-ema-engulfing-bar-v3-logo-60x60-1465.png", "middle_icon": "https://c.mql5.com/31/1183/rsi-ema-engulfing-bar-v3-logo-140x140-9749.png", "icon": "https://c.mql5.com/31/1183/rsi-ema-engulfing-bar-v3-logo-200x200-6246.png", "rating": 0, "price": 0, "published": 1726312349, "popularity": 0.4888669294956967, "category": "Indicator", "votes": 0 }, { "id": 113531, "title": "Ladder Heaven", "description": "

If you have difficulty determining the trend as well as entry points, stop loss points, and take profit points, \"Ladder Heaven\" will help you with that.

The \"Ladder Heaven\" algorithm is operated on price depending on the parameters you input and will provide you with signals, trends, entry points, stop loss points, take profit points, support and resistance in the trend That direction.

Helps you easily identify trends, stop losses and take profits in your strategy!

MT4 Version: Click here

Features:

- Non-repainting, non-redrawing and non-lagging indicators.

- Used to follow trends.

- Suggests support and resistance points according to the trend.

- Suggests stop loss and take profit points according to the trend.

- Easy to use with just a single parameter input.

- Customize input parameters to suit your strategy.

- Can be used for all types of trading such as crypto, forex, cdf, stock and all time frames.

- Can be combined with many other indicators to optimize your trading.Can be combined with many other indicators to optimize your trading.

- Useful for every trader.

Thank you for using!

", "url": "https://www.mql5.com/it/market/product/113531", "small_icon": "https://c.mql5.com/31/1064/ladder-heaven-logo-60x60-6465.png", "middle_icon": "https://c.mql5.com/31/1064/ladder-heaven-logo-140x140-4198.png", "icon": "https://c.mql5.com/31/1064/ladder-heaven-logo-200x200-2788.png", "rating": 0, "price": 0, "published": 1708855249, "popularity": 0.48886523980706614, "category": "Indicator", "votes": 0 }, { "id": 40299, "title": "Tripple Moving Averages With Alert", "description": "

About.

\r\n

This indicator is the combination of 3 Exponential Moving averages, 3,13 and 144. it features Taking trades in the direction of trend, and also \r\nhelps the trade to spot early trend change through Small moving averages crossing Big Moving averages

\r\n

Product features

\r\n

1. Have built in Notification system to be set as the user desires (Alerts, Popup notification and Push Notification to Mobile devices) so \r\nwith notification on, you do not need to be at home, or glued to the computer, only set and wait for notifications to be send to your device, or \r\ncomputer screen\r\n\r\n

\r\n

2. Draws graphics on Chart

\r\n

A sell trade happens when either

\r\n

1. Small Moving averages crosses below Big Moving averages

\r\n

2. Small and Middle Moving averages crosses down below Big moving averages

\r\n

NOTE: The opposite is true for Buy Trade

", "url": "https://www.mql5.com/it/market/product/40299", "small_icon": "https://c.mql5.com/31/423/tripple-moving-averages-with-alert-logo-60x60-5295.png", "middle_icon": "https://c.mql5.com/31/445/tripple-moving-averages-with-alert-logo-140x140-3254.png", "icon": "https://c.mql5.com/31/423/tripple-moving-averages-with-alert-logo-200x200-5447.png", "rating": 4.3333335, "price": 0, "published": 1562692890, "popularity": 0.48886283515648193, "category": "Indicator", "votes": 3 }, { "id": 113507, "title": "MA Color", "description": "

Moving Average Color

Moving Average (MA) is a trend indicator, which is a curved line that is calculated based on price changes. Accordingly, the moving average is the trader’s assistant, which confirms the trend. On the chart it looks like a bending line that repeats the price movement, but more smoothly.

Moving Average Color it is a standard moving average indicator with a color change when the trend direction changes. The ability to set additional levels has also been added.

It is a handy tool for visual trending both for manual trading and for automating your strategies.

Buffers for connecting the indicator to your expert:

0 - Buy;

1 - Sell;

2 - Upper additional level;

3 - Lower additional level;

Have a successful trade!

", "url": "https://www.mql5.com/it/market/product/113507", "small_icon": "https://c.mql5.com/31/1064/ma-color-logo-60x60-9995.png", "middle_icon": "https://c.mql5.com/31/1064/ma-color-logo-140x140-5297.png", "icon": "https://c.mql5.com/31/1064/ma-color-logo-200x200-8329.png", "rating": 4.6666665, "price": 0, "published": 1708799470, "popularity": 0.48832788366584035, "category": "Indicator", "votes": 3 }, { "id": 10633, "title": "Correlation Matrix MT5 Indicator by PipTick", "description": "

The Correlation Matrix indicator shows the actual correlation between the selected instruments. The default setting is set to 28 currency pairs, gold, and silver, but the indicator can compare any other symbols.

Interpretation of the indicator

Positive correlation (correlation is above 80 %).
Negative correlation (correlation is below -80 %).
Weak or no correlation (correlation is between -80 and 80 %).

Main features

The indicator shows the actual correlation between the selected instruments.
A simple comparison of one symbol against another.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
Customizable parameters (Colors, Correlation Period, Symbols...).
High-speed calculation.
The indicator works with prefixes and suffixes of symbols as well (EURUSD.m, EURUSD-pro...).
Available for MT4 and MT5.

Please visit the Correlation Matrix product page for the input and output parameters settings.

", "url": "https://www.mql5.com/it/market/product/10633", "small_icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-60x60-7582.png", "middle_icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-140x140-3121.png", "icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-200x200-3998.png", "rating": 0, "price": 39, "published": 1436969034, "popularity": 0.48726232312681717, "category": "Indicator", "votes": 0 }, { "id": 69265, "title": "Supreme MACD Divergence Indicator", "description": "

A lot of professional traders use high quality divergence signals as a part of their strategy to enter a position. Spotting correct divergences quickly can often be hard, especially if your eye isn’t trained for it yet. For this reason we’ve created a series of easy to use professional oscillator divergence indicators that are very customisable so you get only the signals you want to trade.

We have this divergence indicator for RSI, MACD, Stochastics, CCI and OBV.

FEATURES

Use the tools that pro trades use.
High quality, non repainting divergence signals
Classic bearish, classic bullish, hidden bearish and hidden bullish signals
Pick desired divergence size (only big divergences of all kinds of divergences?)
Fully compatible with our divergence scanners
Alerts (pop up with audio, email, mobile)

HOW TO USE?

Simply attach the indicator to the instrument and timeframe of choice. When attaching it to the chart you can customize the options (alerts, period, which divergences, etc…)

SCANNERS

Please also check out our divergence scanners which give you an overview of the divergences in the entire market. More info through the links hereunder:

RSI Scanner: https://www.mql5.com/en/market/product/69268
MACD Scanner: https://www.mql5.com/en/market/product/69270
STOCH Scanner: https://www.mql5.com/en/market/product/69269
CCI Scanner: https://www.mql5.com/en/market/product/69272
OBV Scanner: https://www.mql5.com/en/market/product/69271

For more technical info or questions, please send us a message.

", "url": "https://www.mql5.com/it/market/product/69265", "small_icon": "https://c.mql5.com/31/627/supreme-macd-divergence-indicator-logo-60x60-7023.png", "middle_icon": "https://c.mql5.com/31/627/supreme-macd-divergence-indicator-logo-140x140-7188.png", "icon": "https://c.mql5.com/31/627/supreme-macd-divergence-indicator-logo-200x200-7808.png", "rating": 0, "price": 0, "published": 1625828738, "popularity": 0.48702056436426017, "category": "Indicator", "votes": 0 }, { "id": 157625, "title": "BB and EMA 50", "description": "

BB and EMA 50

This indicator merges BollingerBands and EMA50 to clarify trend strength, momentum shifts, volatility expansion, and directional bias, offering structured insights for breakout detection, pullback validation, and dynamic trend continuation across varied market conditions while improving precision in identifying reliable trade setups. It also includes an interactive hide-and-show line control using integrated buttons for flexible visual analysis.

", "url": "https://www.mql5.com/it/market/product/157625", "small_icon": "https://c.mql5.com/31/1659/bb-and-ema-50-logo-60x60-1957.png", "middle_icon": "https://c.mql5.com/31/1659/bb-and-ema-50-logo-140x140-4263.png", "icon": "https://c.mql5.com/31/1659/bb-and-ema-50-logo-200x200-4908.png", "rating": 0, "price": 0, "published": 1765077891, "popularity": 0.48608865917400845, "category": "Indicator", "votes": 0 }, { "id": 156483, "title": "Trend Duration Forecast MT5", "description": "

The Trend Duration Forecast MT5 indicator is designed to estimate the probable lifespan of a bullish or bearish trend. Using a Hull Moving Average (HMA) to detect directional shifts, it tracks the duration of each historical trend and calculates an average to forecast how long the current trend is statistically likely to continue. This allows traders to visualize both real-time trend strength and potential exhaustion zones with exceptional clarity.

KEY FEATURES

Dynamic Trend Detection: Utilizes the Hull Moving Average to identify when price transitions into a new uptrend or downtrend.

Trend Duration Counting: Measures the number of bars in each completed bullish and bearish phase to understand trend persistence.

Forecast Projection: Automatically projects an estimated trend continuation line based on the average length of recent trends.

Real-Time Updates: Continuously updates the “Real Length” label as the trend develops

Historical Data Table: Displays previous trend durations for both bullish and bearish cycles, along with their averages.

Adaptive Sampling: Uses a customizable sample size to smooth out volatility in the forecast and provide statistically meaningful projections.

Color-Based Clarity: Highlights uptrends is green and downtrends is red for instant visual interpretation.

Compare the Real Length of the ongoing trend with the Probable Length forecast to estimate whether the move is nearing exhaustion.

Ideal for swing or trend-following strategies where trend longevity is crucial to managing entries and exits effectively.

SETTINGS

Trend Detection Sensitivity: Control how fast or slow the indicator reacts to trend changes — lower values increase responsiveness, while higher values smooth out noise.

Trend Sample Size: Historical duration table to understand the average lifespan of trends in the current market structure

Color Trend: Use the color HMA line and projection arrows to identify when momentum strength is fading and prepare for possible reversals.

Alert: Alert when the trend reverses.

The Trend Duration Forecast MT5 gives traders a quantitative edge by combining real-time trend tracking with statistical forecasting. It helps identify not only when a new trend begins, but also how long it’s likely to persist based on past market behavior. This indicator enhances timing precision for both entries and exits, supporting smarter trend-following decisions with clear, data-driven insights.", "url": "https://www.mql5.com/it/market/product/156483", "small_icon": "https://c.mql5.com/31/1638/trend-duration-forecast-mt5-logo-60x60-2729.png", "middle_icon": "https://c.mql5.com/31/1638/trend-duration-forecast-mt5-logo-140x140-7625.png", "icon": "https://c.mql5.com/31/1638/trend-duration-forecast-mt5-logo-200x200-8614.png", "rating": 0, "price": 35, "published": 1764144610, "popularity": 0.4860883560130893, "category": "Indicator", "votes": 0 }, { "id": 110406, "title": "ICT Power of 3 MT5", "description": "

One of the most powerful and important ICT concepts is the Power of 3.

It explains the IPDA (Interbank Price Delivery Algorithm) phases. PO3 simply means there are 3 things that the market maker's algorithm do with price:

Accumulation, Manipulation and Distribution

ICT tells us how its important to identify the weekly candle expansion and then try to enter above or below the daily open, in the direction of the weekly expansion.

This handy indicator here helps you keep track of the weekly and daily candles without having to check multiple charts. You can choose to print a daily, weekly and even a monthly candle in your LTF chart. Helps you to visualize in the LTF where you are in the HTFs, helps you visualize the Judas Swing.

You can also choose how many HTF bars you want to see in your LTF chart with the \"Max History Bars\" input.

All settings are self explanatory, I have added a \"GMT offset\" setting if you want to use the NY Midnight open (the \"true\" IPDA open). For example if your broker server time is GMT 0, then you leave this input at 0 if you wanna match your broker's daily open. If you want the daily candle to start at NY Midnight then you would set this input with -4 (for UTC -4), or -5 (for UTC -5).

MT4 Version
https://www.mql5.com/en/market/product/110401?source=Site

", "url": "https://www.mql5.com/it/market/product/110406", "small_icon": "https://c.mql5.com/31/1025/ict-power-of-3-mt5-logo-60x60-8072.png", "middle_icon": "https://c.mql5.com/31/1025/ict-power-of-3-mt5-logo-140x140-4096.png", "icon": "https://c.mql5.com/31/1025/ict-power-of-3-mt5-logo-200x200-7991.png", "rating": 5, "price": 35, "published": 1703278974, "popularity": 0.48608794649879766, "category": "Indicator", "votes": 1 }, { "id": 131099, "title": "Extreme Spike PRT", "description": "

The Extreme Spike PRT Indicator is an effective tool for identifying sharp market fluctuations. It performs its calculations using the ATR (Average True Range) indicator and displays candles with extreme volatility in two categories: primary spikes and secondary spikes, within the Metatrader platform oscillator window.

This tool assists traders in detecting intense price movements and conducting more precise analyses based on these fluctuations.

Time Frame	15-minute - 1-hour - 4-hour
Trading Style	Scalping - Day Trading - Intraday Trading
Trading Markets	Forex – Commodities – Indices – Stocks

No Repaint: Prevents the indicator from repainting.
Minor Min Extreme Height ATRs: Defines how many times the candlestick length should exceed the ATR to be considered a Minor Spike.
Major To Minor Height Ratio: Sets the ratio of Major Spike candlestick length compared to Minor Spike.
Minor Min Extreme Width: Defines how many candles the Minor Spike remains valid for.
Major Min Extreme Width: Defines how many candles the Major Spike remains valid for.
Alert Major Bottom Enabled: Enables alert for Major Downward Spike.
Alert Major Top Enabled: Enables alert for Major Upward Spike.
Alert Minor Top Enabled: Enables alert for Minor Upward Spike.
Alert Minor Bottom Enabled: Enables alert for Minor Downward Spike.
Alert Stable Enabled: Enables alerts for all Stable Spike candlesticks.

We use this indicator in our Capital Gate EA in conjunction with our proprietary signal filtering system and the Martingale method, resulting in a very interesting hedging and risk management system, that you can purchase on the MQL5 Market.

", "url": "https://www.mql5.com/it/market/product/131099", "small_icon": "https://c.mql5.com/31/1286/extreme-spike-prt-logo-60x60-2994.png", "middle_icon": "https://c.mql5.com/31/1286/extreme-spike-prt-logo-140x140-9741.png", "icon": "https://c.mql5.com/31/1286/extreme-spike-prt-logo-200x200-8565.png", "rating": 0, "price": 35, "published": 1738087001, "popularity": 0.4860510784933516, "category": "Indicator", "votes": 0 }, { "id": 141717, "title": "Easy VWAP", "description": "

VWAP Indicator, the short form of Volume Weighted Average Price, is similar to a moving average but takes into consideration the tick volume of the candles.

The indicator calculates the moving average multiplying the price of each candle for the tick volume in the candle.

Said calculation weighs with more significance price where more transactions were made.

Features:

Visual styling customizable
Period customizable
Ease of use

", "url": "https://www.mql5.com/it/market/product/141717", "small_icon": "https://c.mql5.com/31/1425/easy-vwap-logo-60x60-9231.png", "middle_icon": "https://c.mql5.com/31/1425/easy-vwap-logo-140x140-7204.png", "icon": "https://c.mql5.com/31/1425/easy-vwap-logo-200x200-8062.png", "rating": 0, "price": 0, "published": 1750166944, "popularity": 0.48604330962531533, "category": "Indicator", "votes": 0 }, { "id": 112107, "title": "WaveTrend Pro", "description": "

You need to revise your product description to comply with advertising policies that prohibit guaranteeing or hinting at profits. The current description uses phrases that could be interpreted as promises of financial gain, which violates these rules.

Wave Trend Oscillator Indicator for MetaTrader 5

Discover the Wave Trend Oscillator Indicator, a sophisticated technical analysis tool for MetaTrader 5. This indicator is designed to help traders better understand market dynamics by visualizing wave trends and potential turning points.

This powerful oscillator is built on the principles of wave trend analysis, which helps you identify potential shifts in momentum and market direction. By analyzing these patterns, you can gain a clearer perspective on market activity.

A key feature of this indicator is its ability to detect divergences, which can signal potential changes in a trend's direction. It also identifies intermediate-level crosses of the signal and main lines, offering additional insights into market behavior.

Important Considerations

Risk Acknowledgment: This indicator provides data points for technical analysis. It does not guarantee profitable trades or specific outcomes. All trading involves risk, and past performance is not indicative of future results.
Strategy Integration: This tool is most effective when used as part of a comprehensive trading plan. It's recommended to combine its insights with your own risk management and analysis techniques. For example, using a Fibonacci retracement tool or other strategies can help confirm signals and manage risk.

", "url": "https://www.mql5.com/it/market/product/112107", "small_icon": "https://c.mql5.com/31/1046/wavetrend-pro-logo-60x60-9575.png", "middle_icon": "https://c.mql5.com/31/1046/wavetrend-pro-logo-140x140-3862.png", "icon": "https://c.mql5.com/31/1046/wavetrend-pro-logo-200x200-2408.png", "rating": 0, "price": 35, "published": 1706378571, "popularity": 0.48601538088300866, "category": "Indicator", "votes": 0 }, { "id": 93260, "title": "Double Stochastic RSI Indicator for MT5", "description": "

The Double Stochastic RSI Indicator is a momentum indicator which is based on the Stochastic Oscillator and the Relative Strength Index (RSI). It is used help traders identify overbought and oversold markets as well as its potential reversal signals.

This indicator is an oscillator type of technical indicator which plots a line that oscillates within the range of zero to 100. It also has markers at levels 20 and 80 represented by a dashed line. The area below 20 represents the oversold area, while the area above 80 represents the overbought area.

The indicator detects an oversold market whenever its line drops below 20. It then shades the area brown to indicate an oversold market level. Inversely, it also detects overbought markets whenever the line breaches above 80. It then shades the area blue to indicate an overbought market.

Given the characteristics of this indicator, it can be effectively used as a mean reversal signal indicator based on reversals coming from overbought and oversold market levels.

How the Double Stochastic RSI Indicator Works?

The Double Stochastic RSI Indicator uses a complex algorithm which uses an underlying RSI and applies a formula which is somewhat similar to that of the Stochastic Oscillator. The resulting value is then plotted as a point on the oscillator line.

The indicator also detects whether the value of the line is below 20 or above 80. It then shades the area based whenever the line value is below 20 or above 80.

How to use the Double Stochastic RSI Indicator for MT5

The Double Stochastic RSI Indicator has several variables and options which can be modified within its settings.

“RSI period” refers to the number of periods used on the underlying RSI calculation.

“RSI applied price” refers to the price point on a candlestick used to calculate for the RSI.

“Stochastic period 1”, “Stochastic period 2”, and “Smoothing period” are variables which relate to the Stochastic calculations.

“Overbought level” and “Oversold level” modifies the markers set as the overbought and oversold levels.

Buy Trade Setup

When to Enter?

Wait for the line to drop below 20 then open a buy order as the line crosses above 20.

When to Exit?

Close the trade as soon as the line starts to slope down.

Sell Trade Setup

When to Enter?

Wait for the line to breach above 80 then open a sell order as the line crosses below 80.

When to Exit?

Close the trade as soon as the line starts to slope up.

Conclusion

The Double Stochastic RSI Indicator can be a very effective mean reversal indicator. It is not perfectly accurate but its reversal signals do have a very high probability of resulting in an actual mean reversal. Its reversal signals also lean towards the mid-term trends rather than short pulses, which allows for higher potential gains on a profitable trade.

Before purchasing any EA, please conduct a backtest, as its effectiveness can fluctuate based on factors like market conditions, volatility, and different trading strategies. While some traders may find success with it, others may not experience the same results. It’s essential to take your own risks.

By purchasing this EA, you acknowledge that you have backtested it and believe that it performs effectively

", "url": "https://www.mql5.com/it/market/product/93260", "small_icon": "https://c.mql5.com/31/835/double-stochastic-rsi-indicator-for-mt5-logo-60x60-6315.png", "middle_icon": "https://c.mql5.com/31/835/double-stochastic-rsi-indicator-for-mt5-logo-140x140-6896.png", "icon": "https://c.mql5.com/31/835/double-stochastic-rsi-indicator-for-mt5-logo-200x200-6669.png", "rating": 0, "price": 35, "published": 1675094329, "popularity": 0.48597388556233123, "category": "Indicator", "votes": 0 }, { "id": 158099, "title": "DFG Chart", "description": "

The DFG Chart Indicator displays the historical DFG levels used in the DFG dashboard. These levels are generated dynamically using moving averages and Fibonacci ratios. The Fibonacci Bands automatically adjust to reflect changes in the price range and trend direction. The indicator also features buttons for selecting chart symbol and timeframe, along with a wide range of customization options.

Key Features

Dynamic DFG Levels
Automatically calculated using moving averages and Fibonacci ratios.
Historical Level Visualization
Displays the history of DFG levels as shown in the DFG dashboard.
Adaptive Fibonacci Bands
Fibonacci bands adjust automatically based on changes in the price range and trend direction.
Symbol & Timeframe Selector
Built-in buttons allow quick switching between chart symbols and timeframes.
Customization Options
Numerous settings for tailoring the indicator’s appearance. The settings and color themes of DFG Chart match those of the DFG Dashboard.

", "url": "https://www.mql5.com/it/market/product/158099", "small_icon": "https://c.mql5.com/31/1668/dfg-chart-logo-60x60-2282.png", "middle_icon": "https://c.mql5.com/31/1668/dfg-chart-logo-140x140-4939.png", "icon": "https://c.mql5.com/31/1668/dfg-chart-logo-200x200-6302.png", "rating": 0, "price": 0, "published": 1765465161, "popularity": 0.48596791816116713, "category": "Indicator", "votes": 0 }, { "id": 44120, "title": "Mini Chart Indicators", "description": "

The Metatrader 5 has a hidden jewel called Chart Object, mostly unknown to the common users and hidden in a sub-menu within the platform. Called Mini Chart, this object is a miniature instance of a big/normal chart that could be added/attached to any normal chart, this way the Mini Chart will be bound to the main Chart in a very minimalist way saving a precious amount of real state on your screen. If you don't know the Mini Chart, give it a try - see the video and screenshots below.

This is a great idea for those using Strategy Analysis called \"Triple Screen\", but the native MT5 implementation of the Mini Chart is just basic, and only allows you to add Indicators or different Templates over them using a script or programming an indicator.

Well, not anymore. We present the Mini Chart Indicators, a tool that you can drag and drop on your main chart and configure/add your own Indicators and Templates over any Mini Chart you have.

There are dozens of applications where you can apply Mini Charts. And with the boost of Mini Chart Indicators you will have the freedom to do whatever you want with you Charts in a smart way. Test it for yourself! You will fall in love as I did.

SETTINGS

The Name of the Mini Chart to apply the Template and/or Indicators.
Your template name - It could be any template previously saved by you in the platform.
Up to 5 indicators - each with up to 5 configurable parameters. If you need more, just ping us, we started with this ammount of indicators and parameters thinking that it would be enough for most of the cases. Parameters passed could be INTEGER, DOUBLE or STRING.
Ability to show Log messages on the EXPERTS tab to debug any problem you could encounter.

KNOWN LIMITATIONS

Due to the nature of the Mini Chart, not all Indicators and Templates will work. Please test your desires and intentions on the DEMO version, available here:
MiniChart Indicators DEMO. (* Due to the new MQL5 policy developers cannot provide DEMO versions to the general public here in this website anymore.)
Sometimes an Indicator added to a Template and then used in a Mini Chart will not work, but if the Indicator is added through the Mini Chart Indicators interface it may work. Just be sure then that the Template is saved without it. Test both possibilities.
When saving templates to be used on Mini Charts remember to disable all the things you don't want in it, as well as the desired Zoom level, so the template will have only the items/parameters you want in the Mini Chart. Watch the video for ideas...

Didn't Find a Feature You Need?

No product is perfect for everyone. If you think you need a missing feature from our product just send us a message. We love feedback!

", "url": "https://www.mql5.com/it/market/product/44120", "small_icon": "https://c.mql5.com/31/487/mini-chart-indicators-logo-60x60-1174.png", "middle_icon": "https://c.mql5.com/31/487/mini-chart-indicators-logo-140x140-2374.png", "icon": "https://c.mql5.com/31/487/mini-chart-indicators-logo-200x200-9383.png", "rating": 0, "price": 35, "published": 1595546651, "popularity": 0.48594883323336235, "category": "Indicator", "votes": 0 }, { "id": 133289, "title": "RSI Screener Indicator for Metatrader 5", "description": "

RSI Screener for MT5 is a simple dashboard-type indicator that displays the RSI (Relative Strength Index) oscillator values on different instruments and time frames chosen by the user. In addition, it can be configured by the trader to show signals when the RSI is in overbought/oversold condition, when it crosses these levels or when it crosses the 50 level, which is important in some strategies. It is simple and easy to configure.

On its own, it should not be used as a trading system since RSI signals are not 100% reliable, as is the case with all technical indicators, but it is a useful support tool.

The parameters that can be configured in RSI Screener are the following:

RSI Period : This is the number of periods used in calculating the RSI. The default value is 14.
Overbought Level : This is the level where the RSI reaches overbought condition. It is taken as a bearish signal from the indicator. The default value is 70.
Oversold Level : This is the level where the RSI reaches oversold condition. It is taken as a bullish signal from the indicator. The default value is 30.
List of Symbols: Here the trader indicates the markets or currency pairs for which he/she wants to calculate the RSI values. As many pairs as the broker offers on the platform can be added. By default, the indicator displays EURUSD, GBPUSD, USDJPY and AUDUSD pairs.
List of Timeframes : In this parameter we can indicate in which time frames we want to calculate the RSI for each currency pair. We can add all the time frames that MT5 offers. By default, the indicator displays the M5, M15, M30, H1, H4, D1 and W1 time frames.
Number of bars for arrows display: This parameter is used to assign a specific number of bars for plotting visual signals on the RSI chart.
RSI Overbought/Oversold Signals : In this parameter we indicate whether we want the table to display overbought and oversold signals. By default, the value is False (do not display). If we want the signals to appear, we must select True.
50 Level Crossover Signals: In this parameter we indicate whether we want the dashboard and the alert window to show bullish and bearish RSI level 50 crossover signals. By default, the value is set to False (do not show). If we want the signals to appear we must select True.
Windows Alerts: It allows the indicator to display alerts in the MT5 signals window.
Email Alerts: It allows the indicator to send alerts via email.
Push Notifications: This parameter allows to display alerts in the MT5 app via push notifications.

-To add new currency pairs in Markets, we write the symbol of the pair, for example XAUUSD or XAGUSD, without the “/” symbol and separated by a comma (without spaces).

- Overbought and oversold signals and 50 level crossing are shown as changes in the screener cell and text color. For example, when the RSI is in an overbought condition the text and box changes to green and when it is in an oversold condition it changes to red. You can change the colors in the setting window.

-It has a function that allows the user to access the price chart where the signal is being produced by clicking on the corresponding cell of the screener.

", "url": "https://www.mql5.com/it/market/product/133289", "small_icon": "https://c.mql5.com/31/1312/rsi-screener-indicator-for-metatrader-5-logo-60x60-7462.png", "middle_icon": "https://c.mql5.com/31/1312/rsi-screener-indicator-for-metatrader-5-logo-140x140-5763.png", "icon": "https://c.mql5.com/31/1312/rsi-screener-indicator-for-metatrader-5-logo-200x200-5749.png", "rating": 0, "price": 35, "published": 1740686479, "popularity": 0.4858613887975757, "category": "Indicator", "votes": 0 }, { "id": 154841, "title": "CorrelaMatrix", "url": "https://www.mql5.com/it/market/product/154841", "small_icon": "https://c.mql5.com/31/1606/correlamatrix-logo-60x60-5905.png", "middle_icon": "https://c.mql5.com/31/1606/correlamatrix-logo-140x140-5666.png", "icon": "https://c.mql5.com/31/1606/correlamatrix-logo-200x200-6730.png", "rating": 0, "price": 0, "published": 1762524624, "popularity": 0.4857355184177629, "category": "Indicator", "votes": 0 }, { "id": 14466, "title": "Market Marker MT5", "description": "

The indicator displays peak levels of activity formed by the maximum volume, tracks the correlation of the candles on all timeframes (from the highest to the lowest one). Each volume level is a kind of key trading activity. The most important cluster is inside a month, week, day, hour, etc.

Indicator operation features

A volume level receives Demand status if the nearest volume level located to the left and above has been broken upwards. A volume level receives Supply status if the nearest volume level located to the left and below has been broken downwards.

Apart from supply and demand levels, the indicator finds target levels – TFD (Target For Demand) and TFS (Target For Supply). A target level for a demand one is the nearest level located to the left and above and not broken upwards. A target level for a supply one is the nearest level located to the left and below and not broken downwards.

Indicator buttons

MTF (MarkersTimeFrame) – select the period, starting from which volume levels are displayed.
MM (MarkersMode) – enable/disable level display mode.
NM (NearestMarkers) – display only several levels nearest by time that are above and below the current open price. The number of displayed levels is set by MarkersLastNearest input parameter.
NL (NormalizationLength) – length of levels is proportional to the candle volumes of the timeframe they belong to. As a result, levels from higher timeframes become longer allowing you to see them more clearly. In normal mode, the length of levels is proportional to the candle volumes of the current timeframe.
FL (FixLength) – use the fixed length of levels set in monitor pixels (the length itself is set by MarkersFixLength input parameter).
FH (FixHeight) – use the fixed height of levels set in monitor pixels (the height itself is set by MarkersFixHeight input parameter).
MV (MarkersView) - representation of levels: thick of thin lines.
BV (BordersVisible) - enable/disable period frames.
BM (BoxMode) – enable/disable bars coloring mode.

Inputs

Alerts - enables/disables additional showing of trading tips in the alert window.
Advices - enables/disables trading tips.
VolumeIncreaseCheck - cancel the signal if the volume increases as the price approaches the level.
BackwardBalanceCheck - cancel the signal if the total summary balance is reversed when the price leaves the level and returns to it.
ShowPreliminaryMarkers - show/hide the preliminary levels.
VolumesType - type of volumes: tick or real if provided by the broker.
ButtonsPosition - arrangement of buttons.
MarkersArea - width of the levels based on the timeframe, measured in ATR.
MarkersLastNearest - the number of the nearest levels displayed in NM mode.
BoxContrast – visualizing parameter for BM mode, default – 1.0, fractional step. If the chart has too many purple and red bars, decrease the variable value below 1.0. If the chart has too many gray and yellow bars with almost no red and purple ones, set the variable value higher than 1.0. This parameter is set only once.
FutureSymbol – if you trade a currency pair or a futures, leave the field completely blank. If you trade index, and your broker provides quotes also for the futures on the index, then enter the name of the instrument indicating that futures in this field, for example, #S&P500_M6. Thus, the indicator will work on the index, but the data on the volume will be taken from futures.

The remaining inputs refer to other settings (line color, width or length font size, etc.), and their purpose is clear from their names.

", "url": "https://www.mql5.com/it/market/product/14466", "small_icon": "https://c.mql5.com/31/106/market-marker-mt5-logo-60x60-5787.png", "middle_icon": "https://c.mql5.com/31/439/market-marker-mt5-logo-140x140-1712.png", "icon": "https://c.mql5.com/31/106/market-marker-mt5-logo-200x200-6000.png", "rating": 3.8, "price": 35, "published": 1454669680, "popularity": 0.48573397358439563, "category": "Indicator", "votes": 5 }, { "id": 134960, "title": "Daily Volatility Tracker MT5", "description": "

Daily Volatility Tracker is a practical and lightweight indicator designed to help traders monitor and analyze market volatility based on historical daily price movements.

Whether you're a day trader, swing trader, or scalper, understanding how much a market moves per day is critical for:

Choosing the right pairs to trade
Setting accurate stop-loss and take-profit levels
Adapting to changing market conditions

MT4 Version - https://www.mql5.com/en/market/product/134958/

Join To Learn Market Depth - https://www.mql5.com/en/channels/suvashishfx

What This Indicator Does

This tool calculates and displays the daily range (High - Low) of price movements for the most recent trading days.

It gives you clear insights into:

The highest movement among the selected days
The lowest movement
The average daily range in points
A daily breakdown with day initials (e.g. Monday - 254 points, Tuesday - 310 points, etc.)

Everything is presented cleanly on your chart using a label system that works well with both light and dark themes.

How the “Last 5 Days” Are Counted

Automatically skips weekends (Saturday and Sunday)
Uses the most recent valid trading days (Monday through Friday)
Includes today if it’s a weekday
For example, if today is Monday, it includes:
- Monday (today)
- Friday
- Thursday
- Wednesday
- Tuesday

This ensures the volatility data is accurate and relevant to current trading conditions.

Main Features

Displays key volatility stats directly on your chart
Counts only valid trading days
Customizable font size and color
Clean, multi-line label system for easy reading
Works on any timeframe (uses Daily candles for calculation)

How to Use It

Attach the indicator to any chart
Set how many past days to measure (default: 5)
Instantly view:
- Highest, average, and lowest point ranges
- Daily movement per day (e.g. M - 254 pts)

Use this data to:

Compare volatility across different symbols
Identify high-volatility pairs to trade
Avoid low-activity or flat market conditions

Who It’s For

Traders who want quick visual insight into recent market activity
Those looking to identify the most volatile currency pairs
Traders who rely on volatility-based strategies or setups

Daily Volatility Tracker helps you understand what the market is actually doing, so you can trade smarter with real volatility insight.

Note: This is a free product and is provided as-is. Support is not available, and the source code will not be shared. Please do not request it.

", "url": "https://www.mql5.com/it/market/product/134960", "small_icon": "https://c.mql5.com/31/1335/daily-volatility-tracker-mt5-logo-60x60-3528.png", "middle_icon": "https://c.mql5.com/31/1335/daily-volatility-tracker-mt5-logo-140x140-7971.png", "icon": "https://c.mql5.com/31/1335/daily-volatility-tracker-mt5-logo-200x200-3178.png", "rating": 5, "price": 0, "published": 1742728572, "popularity": 0.48544600675822813, "category": "Indicator", "votes": 1 }, { "id": 162675, "title": "Multi timeframe range trading", "description": "RANGE TRADING METHOD GUIDE

Using the MultiTF_TopBottom_Bands Indicator

1. INTRODUCTION

1.1. What is Range Trading?

Range Trading is a trading method based on identifying the price oscillation zone (range) of the market and utilizing price movements within this zone to trade.

1.2. Basic Principles

Top: Resistance zone - where price typically gets pushed down
Bottom: Support zone - where price typically gets pushed up
Range: The distance between Top and Bottom
% Lines: Important intermediate levels within the range

2. INDICATOR SETUP

2.1. Basic Parameters

TF1 (Main Timeframe - H1)

TF1 = PERIOD_H1 Len1 = 60 (60 candles to determine range) Ypercent_TF1 = 30.0% (30% zone from top/bottom) Colors: Blue (Top/Bottom), Aqua (% lines)

TF2 (Secondary Timeframe - M5)

TF2 = PERIOD_M5\r\nLen2 = 60\r\nYpercent_TF2 = 30.0%\r\nColors: Red (Top/Bottom), Orange (% lines)\r\n

2.2. Line Meanings

TF1_Top/Bot (Blue): Main range from H1
TF1_P1/P2 (Aqua): 30% zone from top and bottom of H1
TF2_Top/Bot (Red): Short-term range from M5
TF2_P1/P2 (Orange): 30% zone from top and bottom of M5

3. BASIC TRADING STRATEGY

3.1. \"Buy Bottom - Sell Top\" Model

A. BUY ORDER

Entry Conditions:

Price touches or approaches TF1_Bottom (blue line below)
Confirmation: Price is below or touches TF1_P2 (aqua line below)
Stronger signal: Price also touches TF2_Bottom (red line below)

Entry Point:

Wait for reversal candle at TF1_Bottom zone
Or enter immediately when price touches TF2_Bottom within TF1_Bottom zone

Stop Loss:

Place below TF1_Bottom: 5-10 pips
Or below nearest swing low

Take Profit:

TP1: TF1_P1 (aqua line above) - close 50%
TP2: TF1_Top (blue line above) - close 50%
Or trailing stop when price breaks TF1_P1

B. SELL ORDER

Entry Conditions:

Price touches or approaches TF1_Top (blue line above)
Confirmation: Price is above or touches TF1_P1 (aqua line above)
Stronger signal: Price also touches TF2_Top (red line above)

Entry Point:

Wait for reversal candle at TF1_Top zone
Or enter immediately when price touches TF2_Top within TF1_Top zone

Stop Loss:

Place above TF1_Top: 5-10 pips
Or above nearest swing high

Take Profit:

TP1: TF1_P2 (aqua line below) - close 50%
TP2: TF1_Bottom (blue line below) - close 50%
Or trailing stop when price breaks TF1_P2

4. ADVANCED STRATEGIES

4.1. Scalping with TF2 (M5)

When to Use:

During highly volatile trading sessions
When TF2 range is wide enough (>30 pips)

How to Trade:

BUY: When price touches TF2_Bottom + reversal candle
- SL: Below TF2_Bottom (3-5 pips)
- TP: TF2_P1 or TF2_Top
SELL: When price touches TF2_Top + reversal candle
- SL: Above TF2_Top (3-5 pips)
- TP: TF2_P2 or TF2_Bottom

4.2. Trading % Zones (P1/P2)

Mean Reversion Model:

When price is in P1 zone (near top): Prepare to SELL
When price is in P2 zone (near bottom): Prepare to BUY
Wait for price action confirmation

% Zone Breakout:

If price BREAKS OUT above P1 → Strong uptrend → Consider BUY
If price BREAKS DOWN below P2 → Strong downtrend → Consider SELL

4.3. Multi-Timeframe Confluence

Strongest Signals:

BUY when: - Price touches TF1_Bottom - Simultaneously touches TF2_Bottom - Both show reversal candles SELL when: - Price touches TF1_Top - Simultaneously touches TF2_Top - Both show reversal candles

5. RISK MANAGEMENT

5.1. Golden Rules

Risk no more than 1-2% of account per trade
Minimum Risk:Reward ratio of 1:2
Do not trade when range is too narrow (<20 pips)

5.2. Lot Size Calculation

Lot Size = (Account Balance × Risk%) / (Stop Loss in pips × Pip Value)\r\n\r\nExample:\r\n- Account: $10,000\r\n- Risk: 1% = $100\r\n- SL: 10 pips\r\n- Pip Value: $10 (for 1 standard lot)\r\n→ Lot = 100 / (10 × 10) = 0.1 lot\r\n

5.3. Trailing Stop

Method 1: By Percentage

When 50% range profit → Move SL to breakeven
When 70% range profit → Trailing stop 30%

Method 2: By Structure

BUY: Trail below nearest swing low
SELL: Trail above nearest swing high

6. WHEN NOT TO TRADE

6.1. Avoid Trading When:

Range is too narrow (H < 20 pips)
Market is in strong trending phase
Important news about to be announced
Price is in middle of range (not near top/bottom)

6.2. Identifying Unsuitable Market

Signs of Trending Market:

Price continuously breaks TF1_Top or TF1_Bottom
Range continuously expanding
Price does not return to retest top/bottom

Action: Switch to trend following strategy or stay out

7. SPECIFIC TRADE EXAMPLES

7.1. Typical BUY Setup

Step 1: Observation - Price drops to TF1_Bottom zone - TF1_P2 is at 1.0850 - TF1_Bottom is at 1.0820 Step 2: Wait for Confirmation - Price touches 1.0825 (near TF1_Bottom) - Pin bar/bullish engulfing appears - TF2_Bottom also at 1.0823 Step 3: Enter Trade - Entry: 1.0830 (after confirmation candle) - SL: 1.0815 (15 pips) - TP1: 1.0875 (TF1_P1) - 45 pips - TP2: 1.0920 (TF1_Top) - 90 pips - Risk:Reward = 1:3 (15 pips risk for 45 pips average reward) Step 4: Trade Management - When price reaches 1.0860 → Move SL to breakeven - When price reaches TP1 → Close 50%, trailing stop remaining 50%

7.2. Typical SELL Setup

Step 1: Observation\r\n- Price rises to TF1_Top zone\r\n- TF1_P1 is at 1.0950\r\n- TF1_Top is at 1.0980\r\n\r\nStep 2: Wait for Confirmation\r\n- Price touches 1.0975 (near TF1_Top)\r\n- Shooting star/bearish engulfing appears\r\n- TF2_Top also at 1.0977\r\n\r\nStep 3: Enter Trade\r\n- Entry: 1.0970 (after confirmation candle)\r\n- SL: 1.0985 (15 pips)\r\n- TP1: 1.0925 (TF1_P2) - 45 pips\r\n- TP2: 1.0880 (TF1_Bottom) - 90 pips\r\n- Risk:Reward = 1:3\r\n\r\nStep 4: Trade Management\r\n- When price reaches 1.0940 → Move SL to breakeven\r\n- When price reaches TP1 → Close 50%, trailing stop remaining 50%\r\n

8. PRE-TRADE CHECKLIST

Pre-Trade Checklist

☐ Range wide enough? (>30 pips for TF1) ☐ Price at Top/Bottom zone? ☐ Reversal candle confirmation present? ☐ TF2 confluence available? ☐ SL/TP clearly defined? ☐ Risk:Reward minimum 1:2? ☐ Lot size appropriate for 1-2% risk? ☐ No important news in next hour? ☐ Mentally prepared to accept SL?

9. SAMPLE TRADING JOURNAL

Record each trade using this format:

Date: 22/01/2026\r\nPair: EUR/USD\r\nSetup: BUY at TF1_Bottom\r\nEntry: 1.0830\r\nSL: 1.0815 (15 pips)\r\nTP1: 1.0875 (45 pips)\r\nTP2: 1.0920 (90 pips)\r\nLot: 0.1\r\nRisk: $100 (1%)\r\nReason: Pin bar at TF1_Bottom + TF2_Bottom confluence\r\nResult: [Awaiting result]\r\nNotes: [Emotional notes, lessons learned]\r\n\r\nRecommend for XAUUSD

10. FINAL ADVICE

10.1. Success Principles

Patience: Wait for proper setup, don't trade just to trade
Discipline: Follow SL/TP, don't move SL while trade is running
Consistency: Stick to one method, don't jump around
Learning: Review trades daily, extract lessons

10.2. Development Roadmap

Week 1-2: Demo trading, familiarize with indicator Week 3-4: Demo trading, test different setups Month 2: Start real account with smallest lot size Month 3-6: Gradually increase lot size when win rate is stable >50%

10.3. When Facing Difficulties

Losing streak >3 consecutive trades → Take 1-2 day break
Win rate <40% after 20 trades → Review methodology
Emotional trading → Return to demo, regain confidence

11. ADDITIONAL REFERENCES

Recommended Books:

\"Trading in the Zone\" - Mark Douglas
\"The New Trading for a Living\" - Dr. Alexander Elder

Skills to Develop:

Basic Price Action
Candlestick patterns
Support/Resistance
Risk Management
Trading Psychology

IMPORTANT NOTE:

No method wins 100% of the time. The goal is to create sustainable profits over time with a win rate around 50-60% and good Risk:Reward ratio. Risk management is always more important than profit!

Version: 1.0
Last Updated: 22/01/2026
Contact: vuongphamtrading@gmail.com

", "url": "https://www.mql5.com/it/market/product/162675", "small_icon": "https://c.mql5.com/31/1800/multi-timeframe-range-trading-logo-60x60-1024.png", "middle_icon": "https://c.mql5.com/31/1800/multi-timeframe-range-trading-logo-140x140-5729.png", "icon": "https://c.mql5.com/31/1800/multi-timeframe-range-trading-logo-200x200-3463.png", "rating": 0, "price": 0, "published": 1769055669, "popularity": 0.48482074304686623, "category": "Indicator", "votes": 0 }, { "id": 49143, "title": "Waves PRO", "description": "

For those who appreciate Richard Wyckoff approach for reading the markets, we at Minions Labs designed a tool derived - yes, derived, we put our own vision and sauce into this indicator - which we called Waves PRO. This indicator provides a ZigZag controlled by the market volatility (ATR) to build its legs, AND on each ZigZag leg, we present the vital data statistics about it. Simple and objective.

This indicator is also derived from the great book called \"The Secret Science of Price and Volume\" by Timothy Ord (2008).

WHAT EXACTLY DOES THIS INDICATOR DO?

Shows vital VOLUME information on each leg on the Price Chart:

Total Volume of the leg.
Average Volume in each candle of the leg.
Last leg % Delta variation on volume.
Penultimate leg % Delta variation on volume

WHY IS THIS IMPORTANT?

Volume is one of the most underrated information for a vast majority of the traders worldwide. Obviously not all exchanges provide Volume information on their platform, but if you have this information available, WHY not use it in your favor??

If you don't know how to analyze or take advantage of the Volume information on your trades, we strongly suggest the reading of the cool book written by Timothy Ord. It will open you mind to a new kind of analysis and enhance your success rate to a new level.

SETTINGS / FEATURES

ATR period (bars) to analyze on the calculations of the legs. If you don't know what ATR is, YOU MUST. This is one of the BEST measurements of market breadth you can have on your toolbox. That's why we used ATR instead of arbitrary values do \"break\" the legs on our ZigZag.
Which ATR level do you want to use to break each wave/leg.
Show (ON/OFF) each wave/swing/leg statistics?
Show (ON/OFF) Tops & Bottoms lines extended as Support & Resistances?
How many days do you want for Tops & Bottoms lines?
Volume Type to use on calculations (Real Volume OR Ticks)?
Threshold line Style - This is the line plotted on the chart to visually tell you where is the current level that, when hit, will build a new Wave/Leg.
Swing/Leg Statistics: Ability to turn ON/OFF Total Volume, Average candle Volume, Last Leg % Delta volume, Penultimate Leg % Delta volume.
Ability to shorten the numbers dividing them by... X
Decimal points to use for data/numbers.
Suffix text to apply to transformed numbers.
Separator character to use on each data element.
Font Size.
Vertical Offset for proper viewing.
% threshold to color strong Swings/Legs.
Colors for Neutral, Positive and Negative Swings/Legs.
Styles to be used for Tops & Bottoms lines.
Show Debug information of the indicator on the Experts tab?

Do you want to try the DEMO version first: Find it Here: Waves PRO DEMO.

* Due to the new MQL5 policy developers cannot provide DEMO versions to the general public here in this website anymore.

DIDN'T FIND A FEATURE YOU NEED?

No product is perfect for everyone. If you think you need a missing feature from our product just send us a message. We love feedback!

ABOUT US...

Flavio Jarabeck is the owner of MinionsLabs.com, an entrepreneurship focused on leveraging the knowledge and experience of professional traders through automated trading robots, freeing them to seek new opportunities and strategies in new markets and assets.

", "url": "https://www.mql5.com/it/market/product/49143", "small_icon": "https://c.mql5.com/31/502/waves-pro-logo-60x60-4569.png", "middle_icon": "https://c.mql5.com/31/505/waves-pro-logo-140x140-7635.png", "icon": "https://c.mql5.com/31/505/waves-pro-logo-200x200-6541.png", "rating": 0, "price": 35, "published": 1599960510, "popularity": 0.48466493934691035, "category": "Indicator", "votes": 0 }, { "id": 154391, "title": "Bank Levels Tracker for MT5", "description": "

If you can’t beat them, join them.
Trade where institutions seek liquidity.

Bank Levels Tracker identifies institutional price zones where stop-hunts commonly occur — just beyond obvious swing highs and lows where retail stops cluster.
These “bank levels” are plotted in real time, never repaint, and trigger instant alerts when price reaches them.

Built for traders who trade bank levels directly — or use them as high-probability confluence for better-timed entries.

How Bank Levels Tracker Works:

Retail stop-losses often accumulate just beyond clear highs and lows. Institutions frequently push price into these areas to access liquidity.

Bank Levels Tracker marks these zones in advance and monitors price interaction automatically. When a level is reached, the tool provides a clear visual cue and optional alert.

Triggered levels remain visible on the chart for review, analysis, and learning.

Key Features

Multiple Level Modes
Choose from scalping, intraday, or swing modes, each available in aggressive or conservative variants.

Non-Repainting Levels
Levels are bound to price and remain consistent across all timeframes.

Directional Bias Control
Instantly filter levels to show only upper (short-bias) or lower (long-bias) zones.

On-Chart ADR Indicator
Identify levels that extend beyond the daily range, where exhaustion and reversals are more likely.

Full Transparency
Triggered levels remain on the chart for post-trade review and analysis.

Alert Modes

The preferred alert mode can be selected in the input settings.

Auto Alerts Mode
Automatically monitors all levels and issues an alert whenever price reaches one. Ideal when screen-watching is not possible.

Manual Alerts Mode
Place alerts by clicking directly on a level.

Alerts can be set on:

New, untouched levels
Previously stop-hunted levels. This is especially useful for traders who trade level re-tests after an initial stop-run.

Alerts in this mode are cancelled automatically when the chart timeframe changes, removing the hassle of manual alert management.

Using Bank Levels Tracker to Enter the Market

When trading bank levels as a standalone approach, confirmation is recommended—for example, a candle close back beyond the level after a stop-run.

When used as confluence within another strategy, trades can be taken as alerts trigger, allowing more favorable entry prices.

Improving Trade Consistency

Not every stop-run leads to a reversal.

Common outcomes include:

Stop-run reversal: price snaps back after liquidity is collected.
Stop-run continuation: price continues once weak positions are cleared.

To improve consistency:

Wait for confirmation after a stop-run

Align levels with major support/resistance or higher-timeframe EMAs
Focus on levels beyond the ADR, where exhaustion is more likely
Levels never repaint when switching timeframes, making this confluence reliable

Bank Levels Tracker is not supported in the Strategy Tester.

", "url": "https://www.mql5.com/it/market/product/154391", "small_icon": "https://c.mql5.com/31/1741/bank-levels-tracker-for-mt5-logo-60x60-9264.png", "middle_icon": "https://c.mql5.com/31/1741/bank-levels-tracker-for-mt5-logo-140x140-2940.png", "icon": "https://c.mql5.com/31/1741/bank-levels-tracker-for-mt5-logo-200x200-5360.png", "rating": 0, "price": 35, "published": 1762104335, "popularity": 0.48293566388451925, "category": "Indicator", "votes": 0 }, { "id": 146845, "title": "Awesome Oscillator Dynamic", "description": "

Awesome Oscillator Dynamic Indicatore tecnico che mostra, tramite un istogramma, la differenza tra due medie mobili semplici (SMA 5 e SMA 34) applicate al prezzo mediano. Il colore delle barre cambia automaticamente: verde per momentum rialzista, rosso per momentum ribassista.

Lettura rapida:

Verde sopra lo zero → momentum rialzista
Rosso sotto lo zero → momentum ribassista
Incrocio dello zero → possibile inversione di tendenza

Compatibile con qualsiasi asset e timeframe, senza necessità di configurazione. Usa i dati standard del terminale e appare in finestra separata per una visione chiara.

Download gratuito. Se utile, supporta lo sviluppo con valutazione e commento.

", "url": "https://www.mql5.com/it/market/product/146845", "small_icon": "https://c.mql5.com/31/1491/awesome-oscillator-dynamic-logo-60x60-8857.png", "middle_icon": "https://c.mql5.com/31/1491/awesome-oscillator-dynamic-logo-140x140-5088.png", "icon": "https://c.mql5.com/31/1491/awesome-oscillator-dynamic-logo-200x200-2778.png", "rating": 0, "price": 0, "published": 1755045062, "popularity": 0.4826411458097927, "category": "Indicator", "votes": 0 }, { "id": 8167, "title": "Volume Weighted ATR MT5 Indicator by PipTick", "description": "

The Volume Weighted ATR indicator is a helpful tool for measuring market activity. It is based on the idea of the Volume-Weighted ATR. Combining these two elements helps identify potential turning points or breakout opportunities. The indicator for the classification of the activity of the market uses the moving average and its multiples. Accordingly, where the VWATR bar is located (relative to the moving average), it is labelled as ultra-low, low, average, high, very high or ultra high. The Volume Weighted ATR indicator is rendered as a histogram.

This indicator can calculate the moving average by four methods:

SMA - Simple Moving Average.
SMMA - Smoothed Moving Average.
EMA - Exponential Moving Average.
LWMA - Linear Weighted Moving Average.

Interpretation

By default, there are six zones that can be changed by the user. Depending on which zone corresponds to the Volume Weighted ATR indicator, the histogram bar is colored by the appropriate color.

Ultra VWATR zone - Crimson.
Low VWATR zone - White.
Average VWATR zone - Aqua.
High VWATR zone - DeepSkyBlue.
Very High VWATR zone - RoyalBlue.
Ultra High VWATR zone - Blue.

Main features

A simple classification of the activity of the markets.
Several optional calculation methods.
Real and tick volume calculation.
User selectable ranges of the zones.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
A very fast and reliable indicator.
Customizable parameters (Colors, Line thickness, MA period...).
It can be used for creating EA (Expert Advisor).
Available for MT4 and MT5.

Please visit the Volume Weighted ATR indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/it/market/product/8167", "small_icon": "https://c.mql5.com/31/771/volume-weighted-atr-mt5-indicator-by-piptick-logo-60x60-3626.png", "middle_icon": "https://c.mql5.com/31/771/volume-weighted-atr-mt5-indicator-by-piptick-logo-140x140-7527.png", "icon": "https://c.mql5.com/31/771/volume-weighted-atr-mt5-indicator-by-piptick-logo-200x200-3551.png", "rating": 4, "price": 0, "published": 1424791264, "popularity": 0.4815593835100495, "category": "Indicator", "votes": 2 }, { "id": 135784, "title": "MA Channel Indicator", "description": "

Expert Advisors often use a channel around standard MAs. The indicator builds such a channel and has three buffers: MA, MA Channel Top and MA Channel Bottom.

Now with the help of this single indicator you can plot a channel around the MA on the chart similar to similar Envelopes or Bollinger Bands.

There are a lot of strategies for using it: on the breakout of borders or on the bounce from them.

", "url": "https://www.mql5.com/it/market/product/135784", "small_icon": "https://c.mql5.com/31/1346/ma-channel-indicator-logo-60x60-6922.png", "middle_icon": "https://c.mql5.com/31/1346/ma-channel-indicator-logo-140x140-1106.png", "icon": "https://c.mql5.com/31/1346/ma-channel-indicator-logo-200x200-8132.png", "rating": 0, "price": 0, "published": 1743865111, "popularity": 0.4805537383745822, "category": "Indicator", "votes": 0 }, { "id": 57233, "title": "Vertical Line Repetition On Time", "description": "

This indicator draws a vertical line repeatedly at the set time.

The number of lines that can be set can be set arbitrarily.

In addition, it is possible to set 4 types of lines.

It is possible to change different times, colors, line types, etc.

The time can be set to any time in minutes.

In the next version, we plan to display the high and low prices within the setting range.

", "url": "https://www.mql5.com/it/market/product/57233", "small_icon": "https://c.mql5.com/31/526/vertical-line-repetition-on-time-logo-60x60-7185.png", "middle_icon": "https://c.mql5.com/31/526/vertical-line-repetition-on-time-logo-140x140-9067.png", "icon": "https://c.mql5.com/31/526/vertical-line-repetition-on-time-logo-200x200-7123.png", "rating": 0, "price": 0, "published": 1604409954, "popularity": 0.4805339704702019, "category": "Indicator", "votes": 0 }, { "id": 151980, "title": "Analysis Professor", "description": "

FiboPivot Dashboard - Professional Pivot Point Indicator

🎯 What It Does

FiboPivot Dashboard is a powerful technical analysis tool that automatically calculates and displays Fibonacci-based pivot points on your chart. It identifies key support and resistance levels based on the previous day's price action, helping traders anticipate potential price reversal points and breakout levels.

📊 How to Use

1. **Install & Apply**: Simply attach the indicator to any chart (time frames below D1)

2. **Customize Appearance**: Adjust colors, line styles, and dashboard position to match your trading style

3. **Read the Signals**:

- Price above the pivot line indicates bullish sentiment

- Price below the pivot line indicates bearish sentiment

- Use resistance levels (R1, R2, R3) as potential profit targets

- Use support levels (S1, S2, S3) as potential entry points or stop-loss levels

🎨 How the Dashboard Helps

The vertical dashboard provides instant market insights at a glance:

-Zone Identification: Clearly shows which zone the current price is in (Resistance 1-3, Pivot, or Support 1-3)

-Previous Session Data: Displays yesterday's high, low, open, and close prices for context

-Visual Color Coding: Each level has a distinct color for quick recognition

-Real-Time Updates: Dashboard updates automatically as price moves between zones

-Clean Interface**: Professional design that doesn't clutter your chart

✨ Key Features

- Automatic Fibonacci pivot point calculation

- Customizable colors and line styles

- Interactive dashboard with zone detection

- Works on all timeframes below daily

- Smart weekend gap handling

- Clean, professional appearance

🚀 Benefits for Traders

Save Time: No manual calculations needed

Make Better Decisions: Clear visual representation of key levels

Improve Risk Management: Easily identify support/resistance for stop-loss placement

Enhance Strategy: Perfect for day trading, scalping, and swing trading strategies

The FiboPivot Dashboard is more than just an indicator—it's a complete trading assistant that helps you navigate the markets with confidence!

", "url": "https://www.mql5.com/it/market/product/151980", "small_icon": "https://c.mql5.com/31/1550/analysis-professor-logo-60x60-5593.png", "middle_icon": "https://c.mql5.com/31/1550/analysis-professor-logo-140x140-9223.png", "icon": "https://c.mql5.com/31/1550/analysis-professor-logo-200x200-7757.png", "rating": 0, "price": 0, "published": 1759818750, "popularity": 0.4805316246800891, "category": "Indicator", "votes": 0 }, { "id": 143939, "title": "Tortle WPR", "description": "

WPR Scalper Indicator for MetaTrader 5

Now for free!

The WPR Scalper is a powerful indicator designed for traders seeking precise entry and exit signals based on the Williams %R oscillator. Optimized for volatile markets like BTCUSD on the H1 timeframe, it combines three Williams %R calculations (Fast, Slow, and Tortle) to identify overbought and oversold conditions with high accuracy.

In the context of the WPR Scalper indicator, “Tortle” refers to a user-defined term for a third, slow Williams %R (WPR) indicator with a long period (default value: 255). The term “Tortle” in the original, indicating the slow, stable nature of this WPR component. Similar to a tortoise compared to the faster Fast and Slow WPR components.

Key Features:

Triple WPR Analysis: Utilizes Fast (default: 12), Slow (default: 40), and Tortle (default: 120) WPR periods to confirm strong buy/sell signals.
Customizable Levels: Adjustable overbought/oversold thresholds (default: -85/-15 for Fast, -80/-20 for Slow) to suit various market conditions.
Visual Signals: Displays green arrows for buy signals and red arrows for sell signals directly on the chart for easy identification.
Alerts & Notifications: Supports terminal alerts and push notifications to your mobile device, ensuring you never miss a trading opportunity.
User-Friendly: Easy-to-configure parameters for adapting to different assets and timeframes.

Ideal for scalpers and swing traders, the WPR Scalper provides reliable signals for BTCUSD and other volatile instruments. Enhance your trading strategy with this robust tool, perfect for both manual and automated trading systems.

Recommended Settings for BTCUSD H1:

Fast WPR: 12, Slow WPR: 40, Tortle WPR: 120
Buy Levels: -85 (Fast), -80 (Slow)
Sell Levels: -15 (Fast), -20 (Slow)

Download now and boost your trading precision!

", "url": "https://www.mql5.com/it/market/product/143939", "small_icon": "https://c.mql5.com/31/1451/tortle-wpr-logo-60x60-9863.png", "middle_icon": "https://c.mql5.com/31/1451/tortle-wpr-logo-140x140-9618.png", "icon": "https://c.mql5.com/31/1451/tortle-wpr-logo-200x200-9920.png", "rating": 0, "price": 0, "published": 1752161080, "popularity": 0.4803246852137921, "category": "Indicator", "votes": 0 } ], "total": 10016 }

Full Name

Overview

The Math (How it Works)

Visual Guide

🔵 Blue Lines (Resistance / Targets)

🔴 Red Lines (Support / Buy Zones)

Key Levels to Watch

The idea

Function

Parameters

Issues and disclaimer

How It Works

Benefits for Traders

Input Parameters

How to Use

Free for now, price is going to be 30 USD at Jan 1. 2025.Features:

Advantages:

Ideal Use Case:

What is a \"Pin Bar Pattern\"?

FEATURES

USAGE

SPECIAL BONUS OFFER

INDICATOR FEATURES

TRADING STRATEGY INCLUDED

Key Features

1. ATR-Scaled MACD Oscillator

2. Color-Coded Fast Signal Line

3. Separate Positive / Negative Histograms

Why This Indicator?

Recommended Use Cases

Important Note

Support

Input parameters

🔥 XAUUSD Heat Map Scalping Indicator 🔥

✅ Key Features:

🎓 Who is this for?

Configurations

Transaction Data Analysis Assistant:

Product Description: Swing Points & Liquidity (MT5)

Key Features & Inputs Explanation

1. Swing Settings (Sensitivity)

2. Display Settings (Visuals)

3. Conditions (Filtering)

4. Appearance

How to Use It for Trading

Strategy A: The Retest (Supply & Demand)

Strategy B: Liquidity Runs (Targeting)

Features:

Features:

Parameters:

Descrizione per gli utenti

Caratteristiche principali:

Visualizzazione:

Specifiche tecniche

Parametri di input:

Buffer dell'indicatore:

Connessione all'Expert Advisor

Important

Parameters

Principio di funzionamento dell'indicatore, basato sulla statistica

Visualizzazione dell'indicatore

Caratteristiche principali

Applicazione pratica

Raccomandazioni

Impostazioni dell'indicatore

Moving Average Color

Interpretation of the indicator

Main features

Wave Trend Oscillator Indicator for MetaTrader 5

Important Considerations

The Double Stochastic RSI Indicator is a momentum indicator which is based on the Stochastic Oscillator and the Relative Strength Index (RSI). It is used help traders identify overbought and oversold markets as well as its potential reversal signals.

How the Double Stochastic RSI Indicator Works?

How to use the Double Stochastic RSI Indicator for MT5

Buy Trade Setup

Sell Trade Setup

Conclusion

SETTINGS

KNOWN LIMITATIONS

Didn't Find a Feature You Need?

Indicator operation features

Free for now, price is going to be 30 USD at Jan 1. 2025.
Features:

Indicatori Tecnici per MetaTrader 5

Indicator type

Prezzo

Gann Square of Nine

ML Levels v2

RSI talking to save your eyes

Volume and MarketProfile Pro

Initial Balance Session

Pin Bar Detector 382

Professional Order Flow vs Volume Analysis

Dual Onset MT5

ATR Monitor EA Friendly

Volume By Color RSJ

Big Players Last Fight

Volume Profile Trading System

Dynamic Swing VWAP

TransitGhost

ToolBot Probabilistic Analysis

StrikeZone Macd Atr

TRIXe

Symbol Strength Meter

Fractals ST Patterns Strategy

Supertrend Analysis Dashboard

Heatmap Indicator

Time Levels for MT5

KTrade Data Statistics MT5

Breakout Binary Option

Local Currency Converter Indicator MT5

Trend Range Indicator

Bollinger Bands Pure Sound Alert No Plots

Swing Points Liquidity

SC MTF Rate of Change for MT5 with alert

MultiTF Candle Delta Monitor

Cybertrade Bollinger Bands

AliSessions

RsiCrossSma

Volatility Exhaustion

Session colored Bars with High Low

Multi currency RSI

CandlestickForMt5

GEN Support and Resistance Pivot

Gann Bar Counting

Mirror controller for MT5

Higher Timeframe Candles MT5

Ultimate Double Top Bottom Scanner MT5 FREE

VR Atr Pro MT5

GG Time To Trade

Rsi Ema Engulfing Bar V3

Ladder Heaven

Tripple Moving Averages With Alert

MA Color

Correlation Matrix MT5 Indicator by PipTick

Supreme MACD Divergence Indicator

BB and EMA 50

Trend Duration Forecast MT5

ICT Power of 3 MT5

Extreme Spike PRT

Easy VWAP

WaveTrend Pro

Double Stochastic RSI Indicator for MT5

DFG Chart

Mini Chart Indicators

RSI Screener Indicator for Metatrader 5

CorrelaMatrix

Market Marker MT5

Daily Volatility Tracker MT5

Multi timeframe range trading

Waves PRO

Bank Levels Tracker for MT5

Awesome Oscillator Dynamic

Volume Weighted ATR MT5 Indicator by PipTick

MA Channel Indicator

Vertical Line Repetition On Time

Analysis Professor

Tortle WPR