{ "from": 10368, "count": 72, "list": [ { "id": 26092, "title": "TSO Total Top Bottom Divergence MT5", "description": "

A must-have tool for any strategy based on divergence detection. 10 different oscillators can be used to detect divergences and can be combined with Double Top/Bottom patterns to confirm reversal signals.

SCANNER is included. Now with Scanner you can find trading opportunities and setups easily and faster.

Features

Easily detect strong reversal signals.
10 different oscillators are available for divergence detection.
Divergence & Top/Bottom detection can operate independently or combined.
Get email / push notifications when a divergence is detected.
The indicator is not repainting.
Can easily be used in an EA (see For Developers).

Available Oscillators for Divergence Detection

Relative Strength Index (RSI).
Commodity Channel Index (CCI).
Chaikin Oscillator (CHO).
Chande Momentum Oscillator (CMO).
Moving Average Convergence Divergence (MACD).
Momentum.
Stochastic.
Stochastic RSI.
Relative Vigor Index (RVI).
Rate Of Change (ROC).

Inputs

Name: The name to appear in the parentheses at the top left corner of the oscillator window.
ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
Select Divergence Oscillator: Select one of the available divergence indicators or disable divergence detection.
Relationship between Double Top-Bottom and RSI Divergence:
- Combined: All Double Top - Bottom signals are shown but only the RSI Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and RSI Divergence indicators should be enabled.
- Independent: Each indicator presents their signals independently.
Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If RSI Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.

The following inputs are separated into groups relating to each of the available oscillators. Only the inputs relating to the indicator selected in the Select Divergence Oscillator field need to be adjusted.

RSI Period.
RSI Applied Price: The bar price to be used for RSI calculations.

CCI Period.
CCI Applied Price: The bar price to be used for CCI calculations.

CHO Fast Period: Set the fast period of CHO.
CHO Slow Period: Set the slow period of CHO.
CHO Method: Set the method of calculation of CHO.
CHO Applied Volume: The volume to be used for CHO calculations. (Use real volume only when provided, e.g. stocks, and tick volume when real is not available, e.g. FOREX).

CMO Period.

MACD Fast Period: Set the fast period of MACD.
MACD Slow Period: Set the slow period of MACD.
MACD Signal Period: Set the period for the MACD signal.
MACD Applied Price: The bar price to be used for MACD calculations.

Momentum Period.
Momentum Applied Price: The bar price to be used for Momentum calculations.

Stochastic %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic %D Period: Set the period for calculating %D of the Stochastic oscillator.
Stochastic Slowing: Set the internal smoothing of %K.
Stochastic Method: Set the method that is used to calculate %D.
Stochastic Price Field: The volume to be used for the Stochastic oscillator calculations. (Typically Real for stocks, Tick for FOREX).

Stochastic RSI period: Set the period of RSI.
Stochastic RSI %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic RSI %D Period: Set the period for calculating %D of the Stochastic oscillator.

RVI Period.

ROC Period.

ENABLE MetaTrader Alert / Email Alert / Push Notifications
- Disable.
- Combined: Receive alerts only when the Top/Bottom and Divergence indicators agree on a signal.
- Only Top Bottom: Receive alerts only for Top/Bottom signals.
- Only Divergence: Receive alerts only for Divergence signals.
- Both: Receive alerts for both Top/Bottom and Divergence signals.

", "url": "https://www.mql5.com/pt/market/product/26092", "small_icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-60x60-4164.png", "middle_icon": "https://c.mql5.com/31/441/tso-total-top-bottom-divergence-mt5-logo-140x140-7144.png", "icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-200x200-3406.png", "rating": 1, "price": 99, "published": 1509715802, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25658, "title": "Pm 42", "description": "

A comprehensive tool for determining the levels of support, resistance, reversals in relation to trading sessions. The indicator's thesis can be expressed as follows:

\"Support and resistance levels are undoubtedly formed by the psychological barriers of market participants, and influence the further behavior of the price. But these barriers are different for different groups of traders (One man's meat is another man's poison) and can be grouped by territory or by the trading time\".

Following the thesis, the indicator detects levels and processes data separately for three trading sessions: Asian (including Pacific), European and American.

The User Manual of the indicator is located on the discussion page.

The indicator contains the following subsystems, which can be used either independently or in any combination:

Period Marks: Candles of trading sessions - group and display the data of each trading session in the form of a Japanese candle. Candles can be used for pattern analysis or to visually identify the\r\nsignal source.
Price Marshes: Support and Resistance Levels - displays support/resistance levels in the form of a gradient field of horizontal lines, the color of which depends on the trading sessions in which this level occurred. The color density is directly related to the number of confirmations of this level. The periods of the level sources can be selected from the range \"M1\" to \" W1\".
Proximate Missions: Nearest targets - displays the value of the two nearest levels from the top and bottom to the right of the last bar. Levels are filtered by the current trading sessions (levels of inactive trading sessions are not displayed) from the Price Marshes data.
Periods Meters: Timers of trading sessions - displays the status of trading sessions and the time before their start/end.
Predator Mask - controls the display of sessions in the above tools, allowing you to view data only for selected (or excluding selected) trading sessions.

Inputs

The indicator uses the only input parameter Analysis depth (days). Other settings and mode changes are made via the screen interface of\r\nthe indicator.

Analysis depth (days) - depth of analysis in days.

Default settings (they will also be used in the tester): Autotracking\r\nis on; Candles, Marshes, Timers and\r\nTargets are on; Narrow mode; data source timeframe is equal to the chart timeframe.

\r\n\r\n
Trading sessions

The indicator uses the following parameters of trading sessions:

Trading session	Session time (GMT)	Color on the chart
Asian + Pacific	9.00 pm - 9.00 am	Green
European	6.00 am - 4.00 pm	Blue
American	12.00 am - 10.00 pm	Red

The offset of server time is determined automatically.

System messages

Time shift detecting ... - defines the offset of the server time.
[ Symbol ] [ Period ]: history loading ... - additional story is loaded when changing the indicator modes. If this message does not disappear within a reasonable time, reduce the value of the \"Analysis depth (days)\" input parameter.
Session candels for [Period] period are not provided - impossible to build candles on the selected period of the chart.
Untrusted price area! - prices are unknown: the price is near the boundaries of the analyzed range. Indications unreliable.

", "url": "https://www.mql5.com/pt/market/product/25658", "small_icon": "https://c.mql5.com/31/207/pm-42-logo-60x60-7391.png", "middle_icon": "https://c.mql5.com/31/440/pm-42-logo-140x140-9846.png", "icon": "https://c.mql5.com/31/207/pm-42-logo-200x200-9260.png", "rating": 0, "price": 42, "published": 1509536996, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26123, "title": "MACD candles bars or lines", "description": "

This is an ordinary MACD indicator displayed in the main window according to the selected chart style, i.e. Bars, Candlesticks or Line.

\r\n

When you switch the chart type, the indicator display also changes.

\r\n

Unfortunately I could not improve the chart type switching speed. After switching, there are delays before the arrival of a new tick.

\r\n

The indicator parameters

\r\n

Fast EMA period
Slow EMA period
Signal SMA period
Applied price

", "url": "https://www.mql5.com/pt/market/product/26123", "small_icon": "https://c.mql5.com/31/211/macd-candles-bars-or-lines-logo-60x60-3223.png", "middle_icon": "https://c.mql5.com/31/446/macd-candles-bars-or-lines-logo-140x140-3869.png", "icon": "https://c.mql5.com/31/211/macd-candles-bars-or-lines-logo-200x200-9168.png", "rating": 5, "price": 0, "published": 1509461728, "popularity": 0.3888479342410452, "category": "Indicator", "votes": 1 }, { "id": 25905, "title": "DG DayInfo", "description": "

", "url": "https://www.mql5.com/pt/market/product/25905", "small_icon": "https://c.mql5.com/31/210/dg-dayinfo-logo-60x60-4810.png", "middle_icon": "https://c.mql5.com/31/445/dg-dayinfo-logo-140x140-9877.png", "icon": "https://c.mql5.com/31/210/dg-dayinfo-logo-200x200-3368.png", "rating": 5, "price": 0, "published": 1509447146, "popularity": 0.3079187533014234, "category": "Indicator", "votes": 6 }, { "id": 26031, "title": "PZ Fibonacci MT5", "description": "

Are you tired of plotting Fibonacci retracements or extensions manually? This indicator displays Fibo retracements or extensions automatically, calculated from two different price points, without human intervention or manual object anchoring.

Easy to use
Manual anchoring is not needed
Perfect for price confluence studies
The indicator evaluates if retracements or extensions are needed
Once drawn, you can manually edit the Fibo anchors

The indicator adapts to your chart size and zoom:

Zoom out to get the big picture
Zoom in to dive into price action

Settings

Amplitude - amount of bars between alternative price points of the short term Fibo object
Behavior - indicator can draw two Fibo objects, just the latest one, or just the complete chart one
Drawing Settings - the block is self-explanatory

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/pt/market/product/26031", "small_icon": "https://c.mql5.com/31/210/pz-fibonacci-mt5-logo-60x60-2553.png", "middle_icon": "https://c.mql5.com/31/445/pz-fibonacci-mt5-logo-140x140-4790.png", "icon": "https://c.mql5.com/31/210/pz-fibonacci-mt5-logo-200x200-1399.png", "rating": 4.5714287757873535, "price": 0, "published": 1508852530, "popularity": 0.6201283857782636, "category": "Indicator", "votes": 14 }, { "id": 26025, "title": "SmartArrows", "description": "

For any trader, the result of market analysis is the correct identification of the market entry and exit points. The more correctly they are selected, the more profitable the trading. The SmartArrows indicator does not display any excessive information that may distract or confuse the trader, but only the mot important things. The indicator is very simple to use. When a down arrow appears, open a SELL trade, with an up arrow open BUY.

\r\n

Despite its seeming simplicity, the SmartArrows indicator contains a large analytical algorithm, which allows it to work as efficiently as possible.

\r\n

The indicator generates 2 types of signals - confirmed and unconfirmed. Confirmed signal (large white arrow) is a signal that corresponds to the global trend, unconfirmed signal (small arrow) is a signal that goes against the global trend. Each user can select the suitable trading mode - use all indicator signal, or only the ones that match the global trend.

\r\n

This indicator does not redraw, it generates signals on the current bar. If an arrow appears, it does not disappear regardless of the development of the market situation.

\r\n

Indicator Input Parameters

\r\n

period - sensitivity of the indicator (the higher the value, the fewer signals are obtained)
EnableAlerts - enable/disable generating audio alerts when a signal appears
EmailAlert - enable/disable sending email messages when a signal appears
MobileAlert - enable/disable sending push notifications when a signal appears
UseFilter - use the filter of signals based on correspondence to the global trend
MainFilterPeriod - global filter parameter (if UseFilter = true)
ExtraFilterPeriod - additional filter parameter (if UseFilter = true)

", "url": "https://www.mql5.com/pt/market/product/26025", "small_icon": "https://c.mql5.com/31/209/smartarrows-logo-60x60-9197.png", "middle_icon": "https://c.mql5.com/31/441/smartarrows-logo-140x140-4278.png", "icon": "https://c.mql5.com/31/209/smartarrows-logo-200x200-6199.png", "rating": 5, "price": 69, "published": 1508837704, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25890, "title": "TSO Top Bottom Divergence MACD MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the MACD oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and MACD divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the MACD divergence indicator.
Fast Period: Set the fast period of the MACD oscillator.
Slow Period: Set the slow period of the MACD oscillator.
Signal Period: Set the signal period of the MACD oscillator.
Applied Price: The candlestick price to be used for MACD calculations.
Relationship between Double Top-Bottom and MACD Divergence:

Combined: All Double Top - Bottom signals are shown but only the MACD Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and MACD Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If MACD Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

MACD value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

MACD Signal value: Buffer = 7

", "url": "https://www.mql5.com/pt/market/product/25890", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-60x60-9081.png", "middle_icon": "https://c.mql5.com/31/440/tso-top-bottom-divergence-macd-mt5-logo-140x140-1508.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-200x200-3884.png", "rating": 0, "price": 39, "published": 1508162393, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25893, "title": "TSO Top Bottom Divergence Momentum MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the Momentum oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and Momentum divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the Momentum divergence indicator.
Period: Set the period of the Momentum oscillator.
Applied Price: The candlestick price to be used for Momentum calculations.
Relationship between Double Top-Bottom and Momentum Divergence:

Combined: All Double Top - Bottom signals are shown but only the Momentum Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and Momentum Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If Momentum Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

Momentum value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

", "url": "https://www.mql5.com/pt/market/product/25893", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-60x60-8714.png", "middle_icon": "https://c.mql5.com/31/441/tso-top-bottom-divergence-momentum-mt5-logo-140x140-7494.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-200x200-7984.png", "rating": 0, "price": 39, "published": 1508162383, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25777, "title": "CME CallPut Option Ratio MT5", "description": "

Call/Put Ratio is one of the most well-known indicators of the market sentiment. The indicator has been developed by Martin Zweig. It is based on real volumes of the CBOE option market. As we know, a Call option gives its owner the right to buy the underlying asset at a predetermined price. A Put option gives the right to sell it. Thus, increasing volumes for Call options indicate the increasing demand. The growth of Put option volumes shows that supply starts exceeding demand. If we divide the volume of Call options by the total trading volume, we get a ratio showing the share of purchases relative to the total market share. It varies from 0 to 1 and is a high-frequency oscillator. The indicator allows us to use not only the volumes of option markets, but also the levels of their open interest as a calculation base enabling us to analyze the markets more deeply.

\r\n

The indicator shows three zones:

\r\n

Supply and demand are approximately equal (gray area);
Demand significantly exceeds supply (green area);
Supply significantly exceeds demand (red area).

\r\n

Any market is characterized by a frequent change of states: after a rapid growth, there is a period of active selling, and on the contrary, a strong selling may be followed by an inexplicable period of growth. Call Put Ratio identifies the change of these phases and shows you when you can open a long or short position. Buy when CallPut Ratio goes into the green zone, provided that it was in the red one a few bars ago. On the contrary, sell when the indicator has moved to the red zone from the green one. You can also follow the signal of the red signal line: buy when its fall is replaced by growth, and sell when its growth is replaced by fall.

\r\n

You can find more details about the indicator in the book \"Trading Against the Crowd: Profiting from Fear and Greed in Stock, Futures and Options Markets\" by John Summa.

\r\n

The data on the option volumes ratio are taken from one section of the \"daily bulletin\" - report of the CME, published weekly. This section is called Daily Volume, it is available as Excel files on the official ftp server of the exchange. To update the data on CallPut Ratio, simply copy the corresponding reports to the indicator folder. Detailed instructions on performing the update can be found in the blog How to update CME reports on your PC. The demonstration mode (during testing) does not require the data, the indicator loads them from its internal memory. However, updating the reports is not possible in the demo version, therefore, the CallPut Ratio is displayed with some delay in this mode. The indicator works on any timeframe, but the data are available only for the daily timeframe; therefore, the suggested working chart period is D1. Nevertheless, the volumes of the current trading day are always available. They are updated several times during the trading session.

\r\n

Inputs:

\r\n

Color Theme - select one of the indicator's three color schemes;
Type of CME Volume - one of the CME real volume types, including open interest;
Stundart Deviation - standard deviation ratio, beyond which the CallPut Ratio moves to the red or green area;
Period of Signal Line - averaging period of the moving average;
Auto Detect Report Name - true means the necessary reports are downloaded automatically. Otherwise, the reports specified in the following two parameters are downloaded instead;
Call Option Name - Call option name to be downloaded;
Put Option Name - Put option name to be downloaded.
Update Frequency Min - frequency of updating data from the file base. 0 - updates disabled, 1 - updates occur once a minute.

", "url": "https://www.mql5.com/pt/market/product/25777", "small_icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-60x60-2860.png", "middle_icon": "https://c.mql5.com/31/447/cme-callput-option-ratio-mt5-logo-140x140-3910.png", "icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-200x200-5524.png", "rating": 5, "price": 30, "published": 1507642455, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25794, "title": "FFx Pivot SR Suite Pro MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/25793

\r\n

FFx Pivot SR Suite PRO is a complete suite for support and resistance levels. Support and Resistance are the most used levels in all kinds of trading.

\r\n

Can be used to find reversal trend, to set targets and stop, etc.

\r\n

The indicator is fully flexible directly from the chart

\r\n

4 periods to choose for the calculation: 4Hours, Daily, Weekly and Monthly
4 formulas to choose for the calculation: Classic, Camarilla, Fibonacci and Woodies
Options to choose your own price OHLC for a custom calculation
Alert selectable for each level separately
Each level can be hidden
Levels can be set to display multiple periods in history (great for studying past trading setups)
Panel can be moved (drag and drop) anywhere on the chart
Show or hide the levels table
Show or hide the levels lines

\r\n

User Inputs

\r\n

Panel ID - number for each instance applied on the same chart
History Back Period - set here the number of periods in history to draw the SR lines
Show Lines Text - set here if you want the name and price to be shown with each level
Lines Text Shift - set here the shift of the lines text from the current candle
Lines Style - select here the style for the lines (solid, dot, etc.)
Lines Width - set here the width for the lines
Levels Colors - set here the colors for each levels
Fibo Levels - set here the Fibo % for the Fibo SR calculation
Alert at Candle close - select here to enable the alert at candle close
Sound Alert - select here to enable the sound alert
Sound File - set here the sound file name
Popup Alert - select here to enable the popup alert
Email Alert - select here to enable the email alert
Push Alert - select here to enable the push notification

", "url": "https://www.mql5.com/pt/market/product/25794", "small_icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-60x60-4429.png", "middle_icon": "https://c.mql5.com/31/446/ffx-pivot-sr-suite-pro-mt5-logo-140x140-6311.png", "icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-200x200-7721.png", "rating": 0, "price": 3030, "published": 1507624521, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25707, "title": "MonsterDash Harmonic Indicator MT5", "description": "

MonsterDash Harmonics Indicator is a harmonic pattern dashboard. It recognizes all major patterns. MonsterDash is a dashboard that displays all detected patterns for all symbols and (almost) all timeframes in sortable and scrollable format. Users can add their own user defined patterns. MonsterDash can open and update charts with the pattern found.

\r\n

Settings

\r\n

MonsterDash's default settings are good enough most of the time. Feel free to fine tune them to your needs. The color settings are for those who 'gone to the dark side' (black backgrounds), they are less suitable for white backgrounds.

\r\n

Check pattern every - Set to the frequency to detect and refresh the patterns. This is independent of the chart timeframe.
Symbols to exclude - This is a comma delimited list of symbols to exclude from pattern recognition. MonsterDash looks at all symbols in the Market Watch window.
Minimum AccuracyPercent - Minimum accuracy percentage for pattern recognition.
Price Must Touch All Minimum Ratios - Set to true to force MonsterDash to touch all minimum ratios, set this if you want the price to touch all minimum ratios and provide even better patterns.
Show Pattern Projections - Show/hide projected patterns.
Check M1, M5, M15, M30, H1, H4, D1, W1, MN1 - Set to true to include the timeframe in the harmonic pattern recognition.
Offline timeframes, comma separated - Set to a comma separated list of all offline timeframes (e.g. 2,3). Useful for Renko of Median charts
Show Command Column - Set to true to show an column with a button to open a chart.
Chart Template - Set to the name of the template (include '.tpl') to apply to the chart to open.
Show Alerts - Set to false to disable all alerts.
Show Screen Alerts - Set to true to show screen alerts.
Email Alerts - Set to true to email alerts.
Push Alert Notifications - Set to true to push alerts.
Show 'PatternName' Patterns - Show/hide specific pattern.
Sort Patterns By - Column to sort the information grid to (one of: NoSort, Pattern, Symbol, Timeframe, Direction, Accuracy, Age, Completion, IsProjected).
Sort Direction - Ascending of Descending.
monospacedFont - Pick your favorite font, monospaced is best.
fontSize - Font size.
Show Pattern Label - Set to true to show the pattern name on opened charts.
Show Pattern Accuracy - Set to true to show the pattern accuracy label on opened charts.
Show Initialization User Patterns? - set to true to show the results of the intialization of the user patterns in the Experts tab.
Color Palette - Pick Color Palette for 'Dark' or 'Light' Backgrounds.
Colo(u)rs - You know what to do.
Zigzag parameters - set ZigZag parameters.

\r\n

User Patterns

\r\n

Users can add their own patterns to MonsterDash. Just modify the Monster_UserPatterns.csv to include your patterns. The .csv file can be found in the files folder of the User Data Directory. A sample pattern is already included in the file.

\r\n

Offline Charts

\r\n

MonsterDash will read and detect offline charts. Renko or Median charts among others can be used this way. However, offline charts cannot be automatically opened through MonsterDash to show the pattern found, this is a limitation of MetaTrader 4.

\r\n

Sorting, Scrolling, Opening Charts

\r\n

The patterns can be sorted on all columns. Click the column headers to sort the grid to the information in the column, click again to reverse the sort. The grid containing all patterns can be scrolled using a standard scrollbar. Clicking the button in the last column of the grid will open or update a chart containing the pattern found.

\r\n

Full Description

\r\n

Read this blog post for more information on MonsterDash.

", "url": "https://www.mql5.com/pt/market/product/25707", "small_icon": "https://c.mql5.com/31/205/monsterdash-harmonic-indicator-mt5-logo-60x60-8140.png", "middle_icon": "https://c.mql5.com/31/445/monsterdash-harmonic-indicator-mt5-logo-140x140-4974.png", "icon": "https://c.mql5.com/31/205/monsterdash-harmonic-indicator-mt5-logo-200x200-6899.png", "rating": 3, "price": 169, "published": 1507040614, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 25581, "title": "Currency Index Watcher", "description": "

Currency Index Watcher is a simple and user-friendly tool for whoever wish to trade Forex using currencies indexes.

\r\n

Currency Index Watcher is configurable and usable directly from the panel.

\r\n\r\n\r\n

Indexes of 8 custom currencies

\r\n\r\n

\r\n\r\n\r\n

EUR, USD, GBP, JPY, CHF, AUD, CAD, NZD (default)
Any 3-chars symbol from your market watch could be used (BTC = bitcoin, RUB = ruble, CNH = yuan etc ...) : double click the \r\n symbol label
Ability to select which currencies and made-of pairs will be analyzed : check/uncheck wanted symbols in the \r\n calculation
Graphics : there's 2 types of graphics you'll meet there ...

\r\n Selected currencies compared as an histogram:gives an overview of the whole forex market - automatically updated \r\n according to selected currencies
\r\n Specific currencies's historical data over the chosen period:click on the value to display this graphic, by analyzing \r\n the index of the currencies thru time it's possible to make yourself a better opinion on what's upcoming

\r\n

\r\n\r\n\r\n

Currencies Pairs

\r\n\r\n

Selection of opportunities is made according to the following selection criteria:

\r\n\r\n\r\n

\r\n Minimal threshold:minimal difference in points of indexes' variation, the higher it is the more accurate is the signal.
\r\n Search among all currencies or only opened chart
\r\n Period: (W)eeks/(D)ays/(H)ours/(M)inutes, default is set to 24h.
\r\n MA (moving average's period):0=off, to use prices' from a moving average and take benefit from smoothing rather than standard \r\n prices.

\r\n

Heat zone & signals :

\r\n

\r\n\r\n\r\n

\r\n Add in the heat zone :default is set to 5 - when a pair reaches that level of strength (whatever it is bullish or bearish), it is \r\n signaled as being trending
\r\n Remove from the heat zone :default is set to 3 - when a pair falls below that level of strength (whatever it is bullish or bearish), it \r\n is signaled as not being trending anymore
\r\n Clear journal : will clear the journal

\r\n

Currencies pairs are listed according to a color-code (Green/Red) based on the \"heat zone\" values defined by the user :

\r\n

\r\n\r\n\r\n

\r\n Dark color = strong trend
\r\n Normal color = trending
\r\n Light = insignificantly trending

\r\n

Scope : default is set to 5

\r\n

\r\n\r\n\r\n

\r\n The scope is a \"multitimeframe zoom\", a unique feature developed for CIW, since last update values it displays \r\n aren't \r\n no longer strengths, but forces
\r\n A concrete example being more talkative : \"EURUSD, 24h, Scope 5\", it will show EURUSD force on :

the whole last 24 h : strong bull
the last 19 h : bull
the last 14 h : bull
the last 9 h : bear
the last 4 h : strong bear

\r\n\r\n\r\n

\r\n You'll find more examples on the \"Comments tab\".\r\n

\r\n

With such a deep analysis it's possible to \r\neasily anticipate any upcoming consolidation/breakout etc ...

\r\n\r\n\r\n

Customization & friendliness

\r\n\r\n

\r\n\r\n\r\n

Default settings : any change made to CIW is registered, this button will reset the indicator to its default settings
Beep to notify : enable/disable sound notification

\r\n

Currency Index Watcher is timeframe independent and needs to be applied on one only chart but an interval of \r\n>=24h is recommended to rely on this strategy.

\r\n

", "url": "https://www.mql5.com/pt/market/product/25581", "small_icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-60x60-3021.png", "middle_icon": "https://c.mql5.com/31/439/currency-index-watcher-logo-140x140-1830.png", "icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-200x200-8320.png", "rating": 0, "price": 0, "published": 1507035758, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25666, "title": "Level Alert", "description": "

If you are using horizontal levels, trend lines or equidistant channels, then this indicator will help you. You do not have to watch charts all the time. Just draw channels and lines and when the price will come close to it, the alert will notify you. You can use as many horizontal levels, trend lines, equidistant channels as you need. There is an option to alert only certain levels on the chart.

\r\n

The indicator is really easy to use. It has a switch button to turn it on and off any time. For better performance, first you need to draw all of the lines and only then to turn the alert on with the button.

\r\n

Parameters

\r\n

Distance from a level when alert goes off - when difference between the current price and the level is less than this parameter, the alert goes off.
Distance from a level when alert resets – after the alert went off, it will be reset when the difference between the current price and the level is greater than this parameter.
Work only when object's name ends with _alert – alert only of certain levels. Just add “_alert” to the object’s name.
Sends push notifications to the mobile terminals – send push notifications to the mobile terminals, whose MetaQuotes IDs are specified in the Notifications tab.

", "url": "https://www.mql5.com/pt/market/product/25666", "small_icon": "https://c.mql5.com/31/205/level-alert-logo-60x60-2367.png", "middle_icon": "https://c.mql5.com/31/440/level-alert-logo-140x140-7733.png", "icon": "https://c.mql5.com/31/205/level-alert-logo-200x200-8203.png", "rating": 0, "price": 30, "published": 1506694331, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25598, "title": "Smart Grid MT5", "description": "

Smart Grid MT5 automatically recognizes any symbol, period and scale of the chart and marks it up accordingly. It is possible to mark up the chart by trading sessions. The grid consists of the two main line types.

\r\n\r\n

\r\n

Vertical lines

\r\n

There are two visualization methods:

\r\n

Standard - the lines are divided into three types, separating:

\r\n

Small time period.
Medium time period.
Large time period.

\r\n

Trading Session - the lines are divided into groups (a total of ten). Each group has two lines: the first is responsible for the opening of the trading session, the second for the closing.

\r\n\r\n

\r\n

Horizontal lines

\r\n

They are divided into two types, separating:

\r\n

Medium price period.
Large price period.

\r\n

Division value depends on the chart period and scale.

\r\n\r\n

\r\n

Description of some time periods

\r\n

5 minutes: \r\n
- Small time period divides the chart into segments of 4 hours each, and any candle on H4 chart corresponds with a certain segment on M5 chart.
- Medium time period divides the chart by days.
- Large time period divides the chart by weeks.
\r\n
1 hour: \r\n
- Small time period is absent.
- Medium time period divides the chart by days.
- Large time period divides the chart by weeks. This division allows you to quickly see the end of the past and the beginning of the next week on H1 chart making it easy to determine the day of the week in any part of the chart.
\r\n
4 hours:\r\n
- Small time period is absent.
- Medium time period divides the chart by weeks.
- Large time period divides the chart by months.
\r\n

\r\n

The grid supports all time periods, including non-standard ones.

\r\n\r\n

\r\n

Some input parameter features

\r\n

Method of visualization - select the visualization method.
'Trading Session' method will work during this period and less - added to forcibly disable the visualization method on the higher time periods. If this method is selected and the time period changes for a larger one or a compression occurs, then the visualization will be performed using the \"Standard\" method. It should also be noted that compressed charts are regarded by the grid as having a higher timeframe, for example, compressed M15 is H1, M5 is M30, etc.
The general color of the grid - set color for the entire grid. You can change the color of the lines belonging to a certain type only if the parameter is set to NONE.
Set hotkey for these settings (a, B, c, ..., or 0, 1, 2, ...) - create a \"hot key\" for the current configuration. This significantly facilitates changing the grid representation between the \"Standard\" and \"Trading Session\" methods or between their variations.
I will use the time in GMT (auto switch to the local time) - shift the set time for the trade session lines relative to GMT.

\r\n\r\n

\r\n

Notes

\r\n

When attempting to modify parameters of a previously attached \"indicator\" with a non-empty \"hot key\" value, the changes might not take place. For the changes to take effect, press the corresponding \"hot key\".

\r\n

Suitable keys are \"A\" through \"Z\" or \"0\" through \"9\", except for \"R\" (Refresh).

\r\n

The \"hot keys\" of the indicator do not conflict with the \"hot key\" combinations of the terminal.

\r\n

The \"hot keys\" work on any chart of the terminal, where the \"indicator\" is running with a non-empty \"hotkey\" value.

\r\n

To disable the \"hot keys\" feature, clear the corresponding edit box. It will be disabled only on the current chart.

\r\n\r\n

\r\n

Important

\r\n

The \"Trading Session\" method does not take holidays into account. Therefore, the lines may be shifted, not displayed or displayed incorrectly during such periods.

\r\n

Tooltips are not displayed in testing: hovering the mouse over a line shows its original name instead of the tooltip.

\r\n

To increase usability, the horizontal lines do not separate an explicitly set range (which causes excessive compression/stretching of these lines among themselves during periods of high/low volatility), but rather a dynamically selected one, which takes a number of factors into account. Also, the price range will always be smoothed and have the form - 10, 20, 50, 100, 200, 500, 1000 points, etc.

\r\n

Version for Meta Trader 4: Smart Grid.

", "url": "https://www.mql5.com/pt/market/product/25598", "small_icon": "https://c.mql5.com/31/205/smart-grid-mt5-logo-60x60-4758.png", "middle_icon": "https://c.mql5.com/31/441/smart-grid-mt5-logo-140x140-2677.png", "icon": "https://c.mql5.com/31/205/smart-grid-mt5-logo-200x200-5335.png", "rating": 5, "price": 0, "published": 1506679373, "popularity": 0.9848892146838931, "category": "Indicator", "votes": 5 }, { "id": 23715, "title": "DG TrendSigns", "description": "

Purpose

\r\n

DG Trend+Signs is an indicator that paints candles with trend colors and clearly shows consolidations, using both DoGMA Trend and DoGMA Channel indicators.

\r\n

It was created to help users in their trades, showing trends, consolidations and marking entry and exit points. The indicator also takes consolidations in consideration to identify breakouts.

\r\n

Key features

\r\n

Designed to be simple to use, with a few parameters
Does NOT repaint
Does NOT recalculate
Signals on entries
Works in ALL pairs
Works in ALL timeframes
Many kinds of alerts

\r\n

Main Indicator Parameters and How to Use Them:

\r\n

Signal Sensibility - The sensibility of the of the price change detection (the greater, the less sensible)

\r\n

Use this parameter to tune the sensibility of the DoGMA signal, that means how much price variations are needed to be considered relevant. Similar to the MACD signal, however, it is more sensible.

\r\n

If you using low timeframes (from M1 to M15), for daytrading, use a low integer number (from 3 to 20, e.g.). If you want to make swing or position trades use greater values (above 21, e.g.). Remember to set this parameter lower than Trend Sensibility to achieve better results.

\r\n
\r\n
Trend Sensibility - The sensibility of the trend detection (the greater, the less sensible)
\r\n
\r\n\r\n

This parameter is used to identify trends, it's the main value for the coloring candles feature. As the previous parameter, if you using low timeframe (from M1 to M15), for daytrading, use a low integer number (from 19 to 36, e.g.). If you want to make swing or position trades, analyze greater timeframes (H1, D1) and use greater values (above 144, e.g.).

\r\n
\r\n
Congestion Sensibility - Channel breakout sensibility (the greater, the less sensible)
\r\n
\r\n\r\n

The indicator tunes its sensibility to long periods of consolidations through this parameter. Usually, if you are doing daytrades, use it low (e.g., between 8 and 24), to longer trades, use values from 14 to 36.

\r\n
\r\n
Sigma Sensibility - Amplitude variation of DoGMA Channel
\r\n
\r\n\r\n

Sigma is an advanced parameter and it is related to the variation speed of the DoGMA channel. The greater, the less sensible. We recommend a value between 1.6 and 2.4. If you are beginning to use DG TrendSigns, use the default value (2.1).

\r\n

Minimum Tick variation Sensibility - Minimum tick variation to be considered as a meaningful price movement.

\r\n

Mininum number of ticks of which the price should go before consider it a breakout or a meaningful price movement. Use it carefully, and adjust it to each asset and stock market, since it's linked to the price values itself. If you new to DG TrendSigns or don't know how to use it yet, please set it to 1 or accept the default value.

\r\n

Price to be considered - The price to be used by the indicator in its calculations
Do not paint candles on weak trends/consolidations - Should the indicator paint grayish candles when the trend is weak?

\r\n

Arrow shift - The vertical shift of signal arrow
Bars analyzed - The number of bars to be analyzed
Alerts - Set your preferred alerts

\r\n

Example Settings

\r\n

EURUSD - M1 to M15 charts - Daytrading

\r\n

Signal Sensibility 5
Trend Sensibility 74
Min Tick var 2
Consolidation Sensibility 38
DoGMA Channel Sigma 1.8

\r\n

EURUSD - H1 to D1 charts - Swing trading

\r\n

Signal Sensibility 14
Trend Sensibility 144
Min Tick var 10
Consolidation Sensibility 36
DoGMA Channel Sigma 2.1

\r\n

EURUSD - H1 to W1 charts - Position trading

\r\n

Signal Sensibility 16
Trend Sensibility 310
Min Tick var 14
Consolidation Sensibility 34
DoGMA Channel Sigma 2.1

\r\n

Notes

\r\n

This indicator is a manual trading tool that can be used in many ways. It's up to you to find the best setting to fit your purposes.

\r\n

DoGMA Trend is a copyrighted method that uses combined zero lag averages algorithms to identify a trend, DoGMA Channel is a new approach to calculate a dynamic channel, sensible to consolidations, minimum variations, and quick price spins.

", "url": "https://www.mql5.com/pt/market/product/23715", "small_icon": "https://c.mql5.com/31/184/dg-trendsigns-v2-logo-60x60-9129.png", "middle_icon": "https://c.mql5.com/31/445/dg-trendsigns-logo-140x140-5774.png", "icon": "https://c.mql5.com/31/184/dg-trendsigns-v2-logo-200x200-8503.png", "rating": 2, "price": 89.99, "published": 1506516691, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25630, "title": "Alpha Trend MT5", "description": "

Alpha Trend MT5 is a trend indicator for the MetaTrader 5 platform; it has been developed by a group of professional traders.

The Alpha Trend MT5 indicator finds the most probable tendency reversal points, which allows making trades at the very beginning of a trend.

This indicator features notifications, which are generated whenever a new signal appears (alert, email, push-notification). This allows you to open a position in a timely manner.

Alpha Trend does not redraw, which makes it possible to evaluate its efficiency on history.

Alpha Trend for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24560

Advantages of the indicator

Suitable for scalping and intraday trading.
Simple and easy indicator configuration.
Works on all timeframes.
It can be used in any financial markets: FOREX, CFD, binary options, stocks.
It can be used as a stand-alone tool or in conjunction with other indicators.

Recommended symbols

EURUSD, GBPUSD, AUDUSD, EURCHF, AUDNZD.

Recommendations on usage

Buy signal: the indicator arrow is directed upwards.

Sell signal: the indicator arrow is directed downwards.

Parameters

Period - the main parameter, responsible for the indicator calculation period.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email - enable/disable sending e-mails. If true - enabled, false - disabled.
Push - enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.

", "url": "https://www.mql5.com/pt/market/product/25630", "small_icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-60x60-3346.png", "middle_icon": "https://c.mql5.com/31/445/alpha-trend-mt5-logo-140x140-3048.png", "icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-200x200-7149.png", "rating": 0, "price": 35.9, "published": 1506442578, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25475, "title": "PZ Wedges MT5", "description": "

Esse indicador encontra as cunhas , que são padrões de continuação identificados por linhas de tendência convergentes em torno de um período de consolidação de preços. Ele sinaliza negociações usando uma fuga donchiana ao lado da fuga da formação.

[ Guia de instalação | Guia de atualização | Solução de problemas | FAQ | Todos os produtos ]

Fácil de usar
Cores e tamanhos personalizáveis
Implementa sinais de fuga
Implementa alertas de todos os tipos

Uso ideal

Para ver as fatias de todos os tamanhos, que podem se sobrepor, carregue o indicador várias vezes no gráfico com tamanhos diferentes, por exemplo 6, 12, 18 e 24.

Parâmetros de entrada

Tamanho: tamanho dos padrões encontrados, expressos em barras entre pontos alternativos
Período de breakout: período donchiano para sinalizar negociações
Máx. Barras do histórico: quantidade de barras anteriores a serem examinadas no gráfico
Cor dos padrões de alta: Este parâmetro é auto-explicativo
Cor dos padrões de baixa: este parâmetro é auto-explicativo
Cor dos padrões ininterruptos: este parâmetro é auto-explicativo
Largura da linha: tamanho das linhas do padrão
Cor das fugas de alta: Esta é a cor das setas de compra
Cor das fugas de baixa: Esta é a cor das setas de venda
Tamanho da seta: é o tamanho das setas exibidas no gráfico
Nome do alerta personalizado: legenda personalizada para os alertas gerados neste gráfico
Exibir alertas: ativar ou desativar alertas de tela
Alertas por email: ative ou desative alertas de email.
Alertas por push: ative ou desative alertas por push.
Alertas de som: ative ou desative alertas de som.
Arquivo de som: arquivo de som a ser reproduzido quando um alerta de tela é acionado.

Autor

Arturo Lopez Perez, investidor privado e especulador, engenheiro de software e fundador da Point Zero Trading Solutions.

", "url": "https://www.mql5.com/pt/market/product/25475", "small_icon": "https://c.mql5.com/31/204/pz-wedges-mt5-logo-60x60-1211.png", "middle_icon": "https://c.mql5.com/31/446/pz-wedges-mt5-logo-140x140-3263.png", "icon": "https://c.mql5.com/31/204/pz-wedges-mt5-logo-200x200-4563.png", "rating": 0, "price": 75, "published": 1506357562, "popularity": 0.6995271710377544, "category": "Indicator", "votes": 0 }, { "id": 25433, "title": "Splash MT5", "description": "

The indicator identifies the most suitable moment for entering the market in terms of market volatility, when the market has the strength to move (the signal is indicated by an arrow under the candle).

For each of the signals, the presence of trends on the current and higher timeframes is determined, so that the signal is in the direction of the majority of positions opened on the market (denoted near the signal by abbreviations of timeframes with a trend present).

The signal appears after the candle is closed.

To set the Take Profit level or to exit at the market price, the indicator determines 3 targets (\"ONE\", \"TWO\", \"THREE\" labels on the chart). By default. these are the Fibonacci levels: 1.618, 2.618, 4.236; custom values can be specified in the setting.

Stop Loss can be set near the arrow or at your discretion (remember that the tighter the stop loss, the more often it triggers).

Splash can be used as a standalone trading system, as well as in conjunction with other methods, indicators, systems.
The indicator can be used on any timeframe, on the stock, commodity and currency markets;
It can be used for long-term, medium-term and short-term trading.

Settings

History_Size - the amount of history for calculation.
Period_Candle - calculation period for signal search.
Mult_RS - volatility ratio.
Type_Arrows - type of arrows.
Target - display the targets.
Target_ONE - the first target value.
Target_TWO - the second target value.
Target_THREE - the third target value.
Target_Up - color of up target labels.
Target_Down - color of down target labels.
Trend - display the trend labels.
MA_Period - period of the moving average for determining trends.
MA_type - type of the moving average for determining trends.
MA_price - price type used in calculation of the moving average.
Trend_Text_Up - color of the trend labels for up signals.
Trend_Text_Down - color of the trend labels for down signals.
Trend_Text_FONTSIZE - font size of the trend labels.
VHT - display the trend labels vertically / horizontally / diagonally.
Send_Mail - email notification.
Send_Notification - notification to mobile terminal.
Send_Alert - standard terminal alert.

", "url": "https://www.mql5.com/pt/market/product/25433", "small_icon": "https://c.mql5.com/31/202/splash-mt5-logo-60x60-2761.png", "middle_icon": "https://c.mql5.com/31/447/splash-mt5-logo-140x140-7258.png", "icon": "https://c.mql5.com/31/202/splash-mt5-logo-200x200-3799.png", "rating": 0, "price": 199, "published": 1506353582, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25352, "title": "Pivot Point MT5 Indicator by PipTick", "description": "

The Pivot Point indicator automatically calculates and displays the pivot point line and support and resistance levels. Pivot can be calculated according to the Classic, Floor, Fibonacci, Woodie, Camarilla or DeMark formula. It is also possible to select the period for calculating the indicator. A trader can choose from daily, weekly, monthly, or user-defined periods.

Types of pivots

Classic
Floor
Fibonacci
Woodie
Camarilla
DeMark

Main features

The indicator shows the current and historical pivot point level
Pivot support and resistance levels
Alert notifications for indicator lines
Custom session time
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN)
The indicator is non-repainting
Ready for backtesting
Customizable parameters (Colors, Line thickness, Visibility...)
High-speed calculation
Available for MT4 and MT5

Please visit the Pivot Point indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/pt/market/product/25352", "small_icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-60x60-9050.png", "middle_icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-140x140-8856.png", "icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-200x200-7884.png", "rating": 4.090909004211426, "price": 0, "published": 1505497625, "popularity": 3.078089768602952, "category": "Indicator", "votes": 11 }, { "id": 24129, "title": "Fibonacci Retracement MT5 Indicator by PipTick", "description": "

The Fibonacci indicator automatically displays the Fibonacci retracement levels, representing significant support and resistance. The range for calculating the indicator can be taken from the previous day, week, month, year or user-specified session.

Levels

100 % (High) of the range from the previous session.
0 % (Low) of the range from the previous session.
76,4 % of the range from the previous session.
61,8 % of the range from the previous session.
50 % of the range from the previous session.
38,2 % of the range from the previous session.
23,6 % of the range from the previous session.
138,2 % of the range from the previous session.

Recommendations

It is advantageous to insert multiple copies of our indicator into the chart and watch the levels from daily, weekly and monthly sessions. They tend to work very well as strong support and resistance levels.

Main features

The indicator shows the Fibonacci of the range from the previous session.
Six user-definable levels.
Alert notifications for indicator lines.
Custom session time.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting.
Customizable parameters (Colors, Line thickness, Visibility...).
High-speed calculation.
Available for MT4 and MT5.

Please visit the Fibonacci indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/pt/market/product/24129", "small_icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-60x60-7875.png", "middle_icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-140x140-2202.png", "icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-200x200-2281.png", "rating": 0, "price": 0, "published": 1505403123, "popularity": 0.3786938534828333, "category": "Indicator", "votes": 0 }, { "id": 25039, "title": "AIS Simple Linear Smoothing MT5", "description": "

Este indicador implementa um processo de suavização linear simples.

Uma das desvantagens da suavização exponencial é o rápido decaimento do sinal. Isso torna impossível rastrear totalmente as tendências de longo prazo na faixa de preço. A suavização linear permite ajustar com mais precisão e precisão a filtragem de sinal.

O indicador é configurado selecionando os parâmetros:

LP - este parâmetro permite selecionar o período de suavização. Quanto maior o seu valor, mais tendências de longo prazo o indicador exibe. O valor válido é 0 - 255.

SP - este parâmetro afeta a sensibilidade do indicador. Quanto maior esse parâmetro, maior a influência dos últimos valores da série de preços. Se o valor desse parâmetro for zero, o indicador exibirá uma média móvel simples com período igual a LP+1. O valor válido é 0 - 255.

", "url": "https://www.mql5.com/pt/market/product/25039", "small_icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-60x60-8622.png", "middle_icon": "https://c.mql5.com/31/441/ais-simple-linear-smoothing-mt5-logo-140x140-1689.png", "icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-200x200-5146.png", "rating": 0, "price": 30, "published": 1505321258, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24502, "title": "Infinite Currency Strength Meter All Pairs MT5", "description": "

Think of the rarest pair you can think of. And I assure you that this indicator can compute it is strength.

\r\n

This Currency Meter will literally calculate any currency pairs, either it is a major pair, metal, CFD, commodity, cryptocurrency like Bitcoin/BTC or Ethereum/ETH and even stocks. Just name it and you will get it! There is no currency pair this Currency Meter cannot solve. No matter how rare or exotic is that currency, it will always be solved by this Currency meter on a real-time basis. Sounds good, right? Check it out and backtest it, because I really mean it.

\r\n

All you need to do is name four currencies and let the currency meter do all the calculations. This currency meter also has a very useful specification: just name the currency you want and the meter will scan all the pairs on your MetaTrader 4 and look for the best pair that will fit your currency and all of this is on a real-time basis.

\r\n

If the currency you named is strong, the currency meter will simply scan all your pairs and look for the weakest currency that could be traded on your currency of choice. And if your Currency is weak, the indicator will scan all your pairs to look for the strongest pair that can be traded with your currency of choice! You can refer to the screenshots below.

\r\n

So, this is how to use it:

\r\n

TIME_FRAME - Strength Meter works in all timeframes! Just choose timeframe from M1 to MN. *Note: choosing \"current\" means you choose your current timeframe on your chart.
PERIOD - input number of candles you want to choose. *Note: Period \"0\" means choosing the current candle.
First_Currency - name the 1st currency you want to get the strength (case-sensitive).
Second_Currency - name the 2nd currency you want to get the strength (case-sensitive).
Third_Currency - name the 3rd currency you want to get the strength (case-sensitive).
Fourth_Currency - name the 4th currency you want to get the strength (case-sensitive).
First_COLOR - color of the 1st currency.
Second_COLOR - color of the 2nd currency.
Third_COLOR - color of the 3rd currency.
Fourth_COLOR - color of the 4th currency.
Font_1 - font of objects on the right side of the chart.
Font_2 - font of objects on the left side of the chart.
ALERT

Alert_PAIR - activate alert if there are two currencies going in different directions meaning one is strong, the other one is weak. This would mean that one currency is above 70% and the other one is below 30%.
Alert_CURRENCY - activate alert if there is one currency that is strong or weak. Meaning, either it is higher than 70% or lower than 30%.
ALERT_OFF - choose if you do not want alerts.

Sound_Alert__1 - choose sound alert when a currency is above 70% (ALERT_LEVEL_1_STRONG) or below 30% (ALERT_LEVEL_1_WEAK).
Sound_Alert_2 - choose sound alert when a currency is above 90% (ALERT_LEVEL_2_STRONG) or below 10% (ALERT_LEVEL_2_WEAK).
ALERT_WHEN_STRONG
ALERT_LEVEL_1_STRONG - first level where the currency is getting strong. This should be lower than ALERT_LEVEL_2_STRONG. By default, its value is 70.
ALERT_LEVEL_2_STRONG - second level where the currency is getting extremely strong. This should be higher than ALERT_LEVEL_1_STRONG. You will hear a different sound alert here which can be edited on Sound_Alert_1. By default, its value is 90.
ALERT_WHEN_WEAK
ALERT_LEVEL_1_WEAK - first level where the currency is getting weak. This should be higher than ALERT_LEVEL_2_WEAK. By default, its value is 30.
ALERT_LEVEL_2_WEAK - second level where the currency is getting weak. This should be lower than ALERT_LEVEL_1_WEAK. By default, its value is 30.

\r\n

*NOTE: This is for MetaTrader 5 and the counterpart of my product \"All Currency Meter\".

\r\n

Link to the product: https://www.mql5.com/en/market/product/25026

", "url": "https://www.mql5.com/pt/market/product/24502", "small_icon": "https://c.mql5.com/31/201/infinite-currency-strength-meter-all-pairs-mt5-logo-60x60-7097.png", "middle_icon": "https://c.mql5.com/31/438/infinite-currency-strength-meter-all-pairs-mt5-logo-140x140-4008.png", "icon": "https://c.mql5.com/31/201/infinite-currency-strength-meter-all-pairs-mt5-logo-200x200-2879.png", "rating": 5, "price": 39.99, "published": 1505300311, "popularity": 0.5544556755746447, "category": "Indicator", "votes": 1 }, { "id": 25318, "title": "Exclusive Bollinger MT5", "description": "

Exclusive Bollinger is a professional indicator based on the popular Bollinger Bands indicator and provided with an advanced algorithm.

Unlike the standard Bollinger, my Exclusive Bollinger provides better signals and is equipped with flexible settings allowing traders to adjust this indicator to their trading style. In the indicator, you can set up alerts (alert, email, push), so that you won't miss a single trading signal.

Exclusive Bollinger for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24336

Advantages of the indicator

Perfect for scalping.
Generates minimum false signals.
Suitable for beginners and experienced traders.
Works on all timeframes.
Works on any financial instruments: FOREX, CFD, binary options.
Does not redraw.
Sending signals to email and mobile devices.

Recommended symbols

EURGBP, GBPJPY, AUDNZD, EURCHF, EURUSD.

Recommendations on usage

Sell when the price crosses the upper line of the indicator (see screenshot 1, entry points are encircled).

Buy when the price crosses the lower line of the indicator.

The indicator is best suited for intraday trading, on the timeframe from M1 to H1.

Parameters

Period - the key parameter responsible for the averaging period for calculating the indicator.
Deviation - the number of standard deviations from the main line.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email enable/disable sending e-mails. If true - enabled, false - disabled.
Push enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.
Type of signal - the setting is responsible for the signal to be sent by Alert, Email and Push. Type of signal can be equal to current bar (sending an alert when signal appears on the current bar) or last bar(when a signal occurred on the past bar).
clrUPPER - the color of the upper indicator line.
clrLOWER - the color of the lower indicator line.
clrAVERAGE - the color of the middle line of the indicator.
Width - line width.

", "url": "https://www.mql5.com/pt/market/product/25318", "small_icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-60x60-3291.png", "middle_icon": "https://c.mql5.com/31/445/exclusive-bollinger-mt5-logo-140x140-1927.png", "icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-200x200-9546.png", "rating": 2.6666667461395264, "price": 36, "published": 1505217661, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 25267, "title": "Predicting Donchian Channel MT5", "description": "

The Predicting Donchian Channel MT5 indicator allows predicting the future changes in the levels of the Donchian channel based on the channel position of the price.

\r\n

The standard ZigZag indicator starts drawing its ray in 99% of the time the opposite Donchian channel is touched.

\r\n

The forecast of the channel boundary levels will help in finding the points, where the correction ends or the trend changes, an also to estimate how soon those events can occur.

\r\n

Configurations

\r\n

Period - Donchian channel calculation period. Recommended values are from 12 to 240.

", "url": "https://www.mql5.com/pt/market/product/25267", "small_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-60x60-6557.png", "middle_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-140x140-3966.png", "icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-200x200-1044.png", "rating": 0, "price": 30, "published": 1505204869, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25186, "title": "Break Day Range", "description": "

A signal indicator. It implements the tactics described in Larry Williams' book \"Long-Term Secrets to Short-Term Trading\", Chapter 4, \"Volatility Breakouts - The Momentum Breakthrough\". The indicator displays entry points on the chart using arrows. Input parameters are not used.

\r\n

Example of use in a working trading system

\r\n

It is used on a live account as part of the portfolio of strategies on the GMKN futures. Signal monitoring: https://www.mql5.com/en/signals/204344. Screenshots were created based on the monitoring data.

\r\n

MetaTrader 5 does not provide generation of reports on one or selected symbols, therefore, the information on the trading results was displayed using the tools described in https://www.mql5.com/en/articles/244. The profitreport.mq5 script was slightly modified to filter deals on the GMKN futures. Trading was performed using one contract.

", "url": "https://www.mql5.com/pt/market/product/25186", "small_icon": "https://c.mql5.com/31/200/break-day-range-logo-60x60-5514.png", "middle_icon": "https://c.mql5.com/31/440/break-day-range-logo-140x140-9069.png", "icon": "https://c.mql5.com/31/200/break-day-range-logo-200x200-7957.png", "rating": 0, "price": 59, "published": 1504698999, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25123, "title": "Mr Big MT5", "description": "

The indicator shows and highlights the chart candles, which are formed as a result of large players entering the market in large volumes. Such candles can also be formed after achieving a certainty on the market, when most of the participants hold positions in the same direction. The movement is likely to continue in that direction after such candles.

\r\n

The indicator highlights the significant candles from the existing ones on the chart;
The indicator allows identifying the trends based on candles, in which the positions towards the main tendency are strengthened;
It is possible to filter signals (candles) by volatility, and to display only the ones that are greater than the specified number of points. (this parameter can be the same for all time frames or different for each time frame);
It is possible to filter according to the following principle: display only the candles that break a certain level of the price it is based on (calculated mathematically), or ignore this condition;
It is possible to filter the display of signals by time, or ignore this condition (terminal time on the chart);
The indicator can be used on any timeframe, on any instrument;
It can be used for long-term and medium-term trading or scalping.

\r\n\r\n

\r\n

Settings

\r\n

Period_Candle - calculation period for signal search;
Confirmation_Level - if set to true, the signal must break a certain price level it is based on; if false, the condition is ignored;
Type_Arrows - type of arrows;
Min_Candle_Pips_Common - filter of the signal's (candle) volatility in points, (signals smaller than the values specified in the Min_Candle_Pips_ variables will not be displayed):\r\n
- If set to true, then a value from the Min_Candle_Pips_Common_ALL_TF variable is used as a filter, common for all timeframes;
- If false, then separate values from the Min_Candle_Pips_XX variables are used for each timeframe.
\r\n
Min_Candle_Pips_Common_ALL_TF - signal size in points, common for all timeframes;
Min_Candle_Pips_M1 - signal size in points, used for the M1 timeframe;
Min_Candle_Pips_M2 - signal size in points, used for the M2 timeframe;
Min_Candle_Pips_M3 - signal size in points, used for the M3 timeframe;
Min_Candle_Pips_M4 - signal size in points, used for the M4 timeframe;
Min_Candle_Pips_M5 - signal size in points, used for the M5 timeframe;
Min_Candle_Pips_M6 - signal size in points, used for the M6 timeframe;
Min_Candle_Pips_M10 - signal size in points, used for the M10 timeframe;
Min_Candle_Pips_M12 - signal size in points, used for the M12 timeframe;
Min_Candle_Pips_M15 - signal size in points, used for the M15 timeframe;
Min_Candle_Pips_M20 - signal size in points, used for the M20 timeframe;
Min_Candle_Pips_M30 - signal size in points, used for the M30 timeframe;
Min_Candle_Pips_H1 - signal size in points, used for the H1 timeframe;
Min_Candle_Pips_H2 - signal size in points, used for the H2 timeframe;
Min_Candle_Pips_H3 - signal size in points, used for the H3 timeframe;
Min_Candle_Pips_H4 - signal size in points, used for the H4 timeframe;
Min_Candle_Pips_H6 - signal size in points, used for the H6 timeframe;
Min_Candle_Pips_H8 - signal size in points, used for the H8 timeframe;
Min_Candle_Pips_H12 - signal size in points, used for the H12 timeframe;
Min_Candle_Pips_D1 - signal size in points, used for the D1 timeframe;
Min_Candle_Pips_W1 - signal size in points, used for the W1 timeframe;
Min_Candle_Pips_MN1 - signal size in points, used for the MN1 timeframe;
Time_Filter - filter display of the signals by time;
Start_Signal_Hour - hour to start displaying the signals (terminal time on the chart);
Start_Signal_Minute - minute to start displaying the signals (terminal time on the chart);
End_Signal_Hour - hour to stop displaying the signals (terminal time on the chart);
End_Signal_Minute - minute to stop displaying the signals (terminal time on the chart).

", "url": "https://www.mql5.com/pt/market/product/25123", "small_icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-60x60-8017.png", "middle_icon": "https://c.mql5.com/31/438/mr-big-mt5-logo-140x140-3816.png", "icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-200x200-6528.png", "rating": 0, "price": 99, "published": 1504691933, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25200, "title": "ADR ST Patterns Strategy", "description": "

ADR ST Patterns Strategy is a modification of the classical ADR indicator. This simple indicator corresponds to the parameters specified in the ST Patterns Strategy (https://stpatterns.com/). Structural Target Patterns represents the market consistently divided into components. No trend lines, geometric proportions of the model itself, trading volume, or open market interest are needed for the formation of ST Patterns. They are easily recognized and built only on the basis of breaking through the fractal levels and the distance to the target. ST Patterns overcome the market uncertainty characterizing the previously known graphical compositions and simplify the work of the trader.

The indicator calculates the average daily range of completed trading days and divides this value by a given amount. The result is displayed as a chart in a separate window. It is possible to use the indicator on various timeframes.

Inputs

ADR Period - number of days used to calculate the average;
Divider - divisor, by which the ADR is divided.

You can set the color and size of the chart in the Colors tab.

", "url": "https://www.mql5.com/pt/market/product/25200", "small_icon": "https://c.mql5.com/31/200/adr-st-patterns-strategy-logo-60x60-2328.png", "middle_icon": "https://c.mql5.com/31/446/adr-st-patterns-strategy-logo-140x140-5190.png", "icon": "https://c.mql5.com/31/200/adr-st-patterns-strategy-logo-200x200-3864.png", "rating": 5, "price": 0, "published": 1504621230, "popularity": 0.3609912026599921, "category": "Indicator", "votes": 1 }, { "id": 25199, "title": "Fractals ST Patterns Strategy", "description": "

Fractals ST Patterns Strategy is a modification of Bill Williams' Fractals indicator. It allows setting any number of bars to find a fractal. This simple indicator corresponds to the parameters specified in the ST Patterns Strategy (https://stpatterns.com/). Structural Target Patterns are essentially the market itself, which is consistently divided into components. To form ST Patterns, no trend lines, geometric proportions of the model itself, trading volume or open market interest are needed. They are easily recognized and built solely on the basis of breaking through the fractal levels and the distance to the Target. ST Patterns remove the uncertainty from the market, which is inherent in the previously known graphic compositions, and simplify the work of the trader.

The fractal consists of two sets of arrows - up (upper fractals) and down (lower fractals). Each fractal satisfies the following conditions:

Upper fractal - maximum (high) of a signal bar exceeds or is equal to maximums of all bars from the range to the left and to the right;
Lower fractal - minimum (low) of a signal bar is less or equal to minimums of all bars from the range to the left and to the right.

Input parameters

Bars around - the number of bars before and after the central bar.
Arrow offset - visual offset of the arrow from the bar's High/Low in points.

You can set the arrows' color and size separately for upper and lower fractals in the Colors tab.

", "url": "https://www.mql5.com/pt/market/product/25199", "small_icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-60x60-8522.png", "middle_icon": "https://c.mql5.com/31/445/fractals-st-patterns-strategy-logo-140x140-6380.png", "icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-200x200-1619.png", "rating": 5, "price": 0, "published": 1504615640, "popularity": 0.5858065989515717, "category": "Indicator", "votes": 1 }, { "id": 25134, "title": "Gekko Parabolic SAR Plus", "description": "

Type: Trend

Este é o indicador Parabólico SAR customizado da Gekko Trading, a versão customizada do famoso Parabólico SAR. Tenha o SAR tradicional em mãos mas com a vantagem de configurar diferentes tipos de sinal de entrada e várias formas de ser alertado todas vez que houver um possível ponto de entrada ou saída do mercado.

Parâmetros de Entrada:

Step: Fator de Aceleração, padrão é 0.02, significa que será aumentado em 0.02 toda vez que um novo extremo é alcançado na tendência;
Maximum: Ponto Extremo, o ponto mais alto ou mais baixo de uma tendência atual, padrão é 0.2;
Plays a sound when there is a swing: colocar como true se deseja que o indicador emita um aviso sonoro quando houver mudança na tendência, indicando entrada ou saída;
Write Logs On Terminal Window: colocar como true se deseja que o indicador escreva detalhes do surgimento de sinais nos logs da aba \"Experts\" do terminal do MetaTrader;
Send Mobile Push Notifications: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao aplicativo MetaTrader no seu celular;
Send E-Mail Alerts: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao e-mail cadastrado e configurado no terminal do MetaTrader.

Bons Negócios!

Doe uma parte dos seus lucros para boas causas e entidades de assistência humanitária, \"O dinheiro só vem quando há sentido para ganhá-lo\" .

", "url": "https://www.mql5.com/pt/market/product/25134", "small_icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-60x60-2863.png", "middle_icon": "https://c.mql5.com/31/438/gekko-parabolic-sar-plus-logo-140x140-1972.png", "icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-200x200-3962.png", "rating": 5, "price": 50, "published": 1504284380, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25068, "title": "Gekko ADX Plus", "description": "

Este é o indicador Índice de Direção do Movimento (ADX - Average Directional Index) customizado da Gekko Trading, a versão customizada do famoso ADX. Use o ADX tradicional mas com a vantagem de configurar diferentes tipos de sinal de entrada e várias formas de ser alertado todas vez que houver um possível ponto de entrada ou saída do mercado.

\r\n

Parâmetros de Entrada

\r\n

Period: Período do ADX;
PlotSignalType: Modo de cálculo do sinal de confirmação de tendência e direção do movimento

1- ShowSwingsOnTrendLevel: Mostra Sinais para Mudanças na confirmação de Tendências;
2- ShowSwingsOnTrendLevelDirection: Mostra Sinais para Mudanças na confirmação de Tendências junto com a direção do movimento (Comprado ou Vendido);
3- ShowSwingsOnPosAndNegDI: Mostra Sinais de Entrada/Saída (Comprado ou Vendido) baseados no cruzamento das linhas DI+ e DI- mais a confirmação de Tendência;

Trend Level: O nível de valor do ADX usado para determinar confirmação de início ou fim de tendência;
Plays a sound when there is a swing: colocar como true se deseja que o indicador emita um aviso sonoro quando houver mudança na tendência, indicando entrada ou saída.
Write Logs On Terminal Window: colocar como true se deseja que o indicador escreva detalhes do surgimento de sinais nos logs da aba \"Experts\" do terminal do MetaTrader;
Send Mobile Push Notifications: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao aplicativo MetaTrader no seu celular;
Send E-Mail Alerts: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao e-mail cadastrado e configurado no terminal do MetaTrader;;

\r\n

Bons Negócios!

\r\n

Doe uma parte dos seus lucros para boas causas e entidades de assistência humanitária, \"O dinheiro só vem quando há sentido para ganhá-lo\".

", "url": "https://www.mql5.com/pt/market/product/25068", "small_icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-60x60-2270.png", "middle_icon": "https://c.mql5.com/31/446/gekko-adx-plus-logo-140x140-4687.png", "icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-200x200-6043.png", "rating": 0, "price": 50, "published": 1504110418, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24975, "title": "Gekko RSI Plus", "description": "

Tipo: Osciladores

\r\n

Este é o indicador de Índice de Força Relativa (IFR) customizado da Gekko Trading, a versão customizada do famoso IFR. Use o IFRtradicional mas com a vantagem de configurar diferentes tipos de sinal de entrada e várias formas de ser alertado todas vez que houver um possível ponto de entrada ou saída do mercado.

\r\n

Parâmetros de Entrada

\r\n

Period: Período do RSI;
How will the indicator calculate entry (swing) signals: Modo de cálculo de sinal de entrada ou saída (mudança de tendência)

1- Produz Sinais de Saída baseado no IFR entrando e saindo das zonas compradas e vendidas;
2- Produz Sinais de Entrada/Saída para mudanças de tendência baseados no IFR cruzando para cima ou para baixo a linha central de 50;

Plays a sound when there is a swing: set it as true and it will play a sound on the Metatrader Terminal every time there's a swing on the trend, indicating entry or exit points.
Write Logs On Terminal Window: colocar como true se deseja que o indicador escreva detalhes do surgimento de sinais nos logs da aba \"Experts\" do terminal do MetaTrader;
Send Mobile Push Notifications: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao aplicativo MetaTrader no seu celular;
Send E-Mail Alerts: colocar como true se deseja que o indicador envie notificações do surgimento de sinais ao e-mail cadastrado e configurado no terminal do MetaTrader;;

\r\n

Bons Negócios!

\r\n

Doe uma parte dos seus lucros para boas causas e entidades de assistência humanitária, \"O dinheiro só vem quando há sentido para ganhá-lo\".

", "url": "https://www.mql5.com/pt/market/product/24975", "small_icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-60x60-9176.png", "middle_icon": "https://c.mql5.com/31/439/gekko-rsi-plus-logo-140x140-6419.png", "icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-200x200-8804.png", "rating": 0, "price": 50, "published": 1504110413, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25025, "title": "Simple Line for MQL5", "description": "

It is an analogue of the indicator of levels at https://www.mql5.com/en/market/product/24273 for the MetaTrader 5 platform. The indicator shows the levels of the past month, week and day. In addition, it draws a level in percentage relative to the difference between the High and Low of the past month and week. For the daily levels of the past day, the Close levels are additionally displayed. All you need to do is to configure the display parameters of the levels to your liking. In some cases, after launching the indicator, it can be necessary to go to the required timeframe starting with the month, then week. and then day.

\r\n

Parameters

\r\n

Monthly installations - settings for the monthly period;
MonthlyLines - enable (disable) displaying the levels;
TypeLinesM - line type to display the levels;
InpWidthLinesM - line width to display the levels;
InpMonthlyPercentageLevel - show (hide) the line level as percentage;
PercentageM - level of the line set as a percentage of the High-Low range. Default = 50;
TypeLinesM - type of the line set as a percentage of the High-Low range;
InpWidthLinesM - width of the line set as a percentage of the High-Low range;
ColorLinesM - color of the lines;
Weekly installations - settings for the weekly period;
WeeklyLines - enable (disable) displaying the levels;
TypeLinesW - line type to display the levels;
InpWidthLinesW - line width to display the levels;
InpWeeklyPercentageLevel - show (hide) the line level as percentage;
PercentageW - level of the line set as a percentage of the High-Low range. Default = 50;
TypeLinesPW - type of the line set as a percentage of the High-Low range;
InpWidthLinesPW - width of the line set as a percentage of the High-Low range;
ColorLinesW - color of the lines;
Daylight settings - settings for the daily period;
PreviousDayLines - enable (disable) displaying the levels;
TypeLinesPDL - line type to display the levels;
InpWidthLinesPDL - line width to display the levels;
InpDayCloseLevel - show/hide the daily Close level;
TypeLinesPDLClose - line type of the daily Close level;
InpWidthLinesPDLClose - line width of the daily Close level;
ColorLinesPDL - color of the lines;
The first trading day of the week - set the first trading day (default is Monday);
The last trading day of the week - set the last trading day (default is Friday).

", "url": "https://www.mql5.com/pt/market/product/25025", "small_icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-60x60-4334.png", "middle_icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-140x140-3484.png", "icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-200x200-7239.png", "rating": 0, "price": 30, "published": 1503918388, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24915, "title": "PowerSignalMT5", "description": "

PowerSignal is a complete trading system based on the ATR technical indicator. This indicator will record the current status of each POWERTREND in every time frame and currency pair analyzed. The PowerSignal creates a trend strength and entry point signal list display by evaluating these data. If there is a full coincidence on any pair an alert will pop up indicating such case. List data includes Symbol, M5-MN1, BuyPercent, SellPercent, LastEntry. The LastEntry shows entry points (periods, price, time). When the trend intensity is greater than 75%, it is considered to be a strong currency pair.

Inputs Value

Periods = 14 - indicator period.
Text color = White - Normal text color.
Buy Signal color = LawnGreen - Long signal color.
Sell signal color = OrangeRed - Short signal color.
Alert_ON = false - Disable Alarm. true - Enable Alarm: support Alert, Email, push.
Alert_Min_Interval = 15
Entry_Percent = PERCENT_100 - Trend percentage requirements PERCENT_100 or more.
Wait_Mins_For_Next_Signal = 30 - Wait for the next time of signal.

Author

Daying Cao, an experienced software engineer.

", "url": "https://www.mql5.com/pt/market/product/24915", "small_icon": "https://c.mql5.com/31/197/powersignalmt5-logo-60x60-2675.png", "middle_icon": "https://c.mql5.com/31/445/powersignalmt5-logo-140x140-1219.png", "icon": "https://c.mql5.com/31/197/powersignalmt5-logo-200x200-5265.png", "rating": 0, "price": 30, "published": 1503590519, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24873, "title": "PZ Pennants MT5", "description": "

Este indicador encontra galhardetes , que são padrões de continuação identificados por linhas de tendência convergentes em torno de um período de consolidação de preços. As negociações são sinalizadas usando um período de fuga ao lado da fuga de formação.

[ Guia de instalação | Guia de atualização | Solução de problemas | FAQ | Todos os produtos ]

Fácil de usar
Cores e tamanhos personalizáveis
Implementa sinais de fuga
Implementa alertas de todos os tipos

Uso ideal

Para ver galhardetes de todos os tamanhos, que podem se sobrepor, carregue o indicador várias vezes no gráfico com tamanhos diferentes, por exemplo 6, 12, 18 e 24.

Parâmetros de entrada

Tamanho: tamanho dos padrões encontrados, expressos em barras entre pontos alternativos
Período de fuga: período Donchiano para os sinais de fuga
Máx. Barras do histórico: quantidade de barras anteriores a serem examinadas no gráfico
Cor dos padrões de alta: Este parâmetro é auto-explicativo
Cor dos padrões de baixa: este parâmetro é auto-explicativo
Cor dos padrões ininterruptos: este parâmetro é auto-explicativo
Largura da linha: tamanho das linhas do padrão
Cor das fugas de alta: Esta é a cor das setas de compra
Cor das fugas de baixa: Esta é a cor das setas de venda
Tamanho da seta: é o tamanho das setas exibidas no gráfico
Nome do alerta personalizado: legenda personalizada para os alertas gerados neste gráfico
Exibir alertas: ativar ou desativar alertas de tela
Alertas por email: ative ou desative alertas de email.
Alertas por push: ative ou desative alertas por push.
Alertas de som: ative ou desative alertas de som.
Arquivo de som: arquivo de som a ser reproduzido quando um alerta de tela é acionado.

Autor

Arturo Lopez Perez, investidor privado e especulador, engenheiro de software e fundador da Point Zero Trading Solutions.

", "url": "https://www.mql5.com/pt/market/product/24873", "small_icon": "https://c.mql5.com/31/196/pz-pennants-mt5-logo-60x60-8775.png", "middle_icon": "https://c.mql5.com/31/440/pz-pennants-mt5-logo-140x140-8473.png", "icon": "https://c.mql5.com/31/196/pz-pennants-mt5-logo-200x200-7200.png", "rating": 0, "price": 75, "published": 1503488134, "popularity": 0.6995254414937147, "category": "Indicator", "votes": 0 }, { "id": 24882, "title": "FFx Basket Scanner MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/24881

FFx Basket Scanner is a global tool scanning all pairs and all\r\n timeframes over up to five indicators among the 16 available. You will \r\nclearly see which currencies to avoid trading and which ones to focus \r\non.

\r\n

Once a currency goes into an extreme zone (e.g. 20/80%), you can \r\ntrade the whole basket with great confidence. Another way to use it is \r\nto look at two currencies (weak vs strong) to find the best single pairs\r\n to trade.

\r\n

The panel is fully flexible for easy use

\r\n

Alert at extreme %
Select up to nine timeframes (any combination)
Select up to five indicators among the 16 available
Maximize/minimize the panel to keep only the essential or the whole information visible
One-click to open the symbols chart with selected template and timeframe

\r\n

User Inputs

\r\n

Dashboard ID: number for each instance applied on the same chart.
Candle Close: set here if you want the calculation to be done at candle close or in real time (current candle).
Currency: select here the currency for the panel calculation.
Horizontal/Vertical Shift: set here any number to place the dashboard anywhere on the chart.
Template Name: name of the template you want to be applied when a pair is clicked and chart opened
Timeframe: timeframe you want to be applied when a pair is clicked and chart opened
Strong/Weak Levels %: from 0 to 100 when levels are reached, it can give an alert (popup/sound/email/push). Alert can be activated/deactivated by switching any of the true/false parameters.
Then, all usual parameters for the standard indicators like the ones provided in your MetaTrader 4 platform (see below).

\r\n

The panel can be displayed in a compact mode to monitor only the meter and timeframes selection (see images below).

\r\n

Moving Average

Period: period of the MA
Shift: shift of the MA
Method: method of the MA
ApplyTo: applied price of the MA

MACD

FastEMA: fast EMA period of the MACD
SlowEMA: slow EMA period of the MACD
SignalSMA: SMA period of the MACD
Applied Price: applied price of the MACD

Stochastic

KPeriod: k period of the STO
DPeriod: d period of the STO
Slowing: slowing of the STO
MAMethod: method of the STO
PriceField: applied price of the STO

RSI

Period: period of the RSI
ApplyTo: applied price of the RSI

WPR

Period: period of the WPR

Momentum

Period: period of the Momentum
ApplyTo: applied price of the Momentum

CCI

Period: period of the CCI
Applied Price: applied price of the CCI

ADX

Period: period of the ADX

PSAR

Step: step of the PSAR
Maximum: maximum of the PSAR

DeMarker

Period: period of the DeMarker

Bulls

Period: period of the Bulls

Bears

Period: period of the Bears

Force Index

Period: period of the Force Index
Method: method of the Force Index
Volumes: volumes of the Force Index

", "url": "https://www.mql5.com/pt/market/product/24882", "small_icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-60x60-2593.png", "middle_icon": "https://c.mql5.com/31/438/ffx-basket-scanner-mt5-logo-140x140-1521.png", "icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-200x200-3578.png", "rating": 0, "price": 3030, "published": 1503484085, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24673, "title": "Heiken Ashi and Heiken Ashi Smoothed MA MT5", "description": "

Heiken Ashi Smoothed Strategy is a very simple but powerful system to get forex market trend direction.

\r\n

This indicator is actually 2 indicators in 1 pack, Heiken Ashi and Heiken Ashi Smoothed Moving Average both included.

\r\n

Because HA (Heiken Ashi) and HAS (Heiken Ashi Smoothed) are calculated in the same one system event with necessary buffers and loop only, so it is the FAST, OPTIMIZED and EFFICIENT HA having the combined indicator of MetaTrader 5.

\r\n

You can choose to display HA and HAS in the same time, or display one of them only.

\r\n

Inputs

\r\n

Display Heiken Ashi: true = display Heiken Ashi, false = hide and do not calculate.
Display Heiken Ashi Smoothed: true = display Heiken Ashi Smoothed, false = hide and do not to calculate.
Method of Moving Average To Generate Heiken Ashi Smoothed: Simple, Exponential, Smoothed, Linear weighted, four modes of moving average supported to generate Heiken Ashi Smoothed.
Period of Moving Average To Generate Heiken Ashi Smoothed: Period of moving average to generate Heiken Ashi Smoothed.
Method of Moving Average Of Heiken Ashi Smoothed: Simple, Exponential, Smoothed, Linear weighted, four modes supported to calculate Moving Average of Heiken Ashi Smoothed.
Period of Moving Average Of Heiken Ashi Smoothed: Period of Moving Average of Heiken Ashi Smoothed.

", "url": "https://www.mql5.com/pt/market/product/24673", "small_icon": "https://c.mql5.com/31/194/heiken-ashi-plus-heiken-ashi-smoothed-logo-60x60-5440.png", "middle_icon": "https://c.mql5.com/31/439/heiken-ashi-and-heiken-ashi-smoothed-ma-mt5-logo-140x140-7421.png", "icon": "https://c.mql5.com/31/194/heiken-ashi-plus-heiken-ashi-smoothed-logo-200x200-5323.png", "rating": 5, "price": 77.77, "published": 1502790557, "popularity": 8.573514690944913, "category": "Indicator", "votes": 1 }, { "id": 24394, "title": "Channel FTF MT5", "description": "

The Envelopes indicator determines the presence of a trend or flat. It has 3 types of signals, shows the probable retracement levels and levels of the possible targets.

The Fibonacci coefficients are used in the indicator's calculations.

Signals (generated when touching the lines or rebounding from lines):

Trend - the middle line of the Envelopes has a distinct inclination; the lines below the channel's middle line are used for buy trades, the lines above the middle line and the middle line itself are used for sell trades;
the trade direction must match the direction of the channel's middle line.
Flat - the middle line of the Envelopes is horizontal; signals are received from the edge and pre-edge borders of the channel with the targets at the opposite border of the channel.
Volatility breakout - edge borders of the channel are horizontal; breakout of one of these channel borders indicates a beginning of a movement.

The indicator has an alert system: a standard terminal alert, a message to a mobile terminal, an email message.
In the Alert_Additional_Symbols setting, you can configure alerts for additional tools other than the current tool.

To use the indicator in the Expert Advisors, there are the following indicator buffers.

Settings

It is possible to modify the color, width and type of any indicator line.
Period_Trend - trend period.
Period_Vol - volatility period.
Alert_ID - is a unique alert label.
Alert_Additional_Symbols - separated by commas, you can specify additional tools for which alerts will be received
(this is not required for the current tool).
Send_Notification - on/off notification to the mobile terminal.
Send_Alert - on/off the standard terminal notification.
Send_Mail - on/off email notification.

", "url": "https://www.mql5.com/pt/market/product/24394", "small_icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-60x60-2181.png", "middle_icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-140x140-3539.png", "icon": "https://c.mql5.com/31/541/channel-ftf-mt5-logo-200x200-9864.png", "rating": 0, "price": 50, "published": 1502271718, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24605, "title": "Color Stochastic with an analytical panel", "description": "

The main advantage of this indicator is filtering of buy and sell signals in the direction of the market impulse and ranking them by strength. Configuration of the indicator is simple and intuitive. All you need to do is to react only to strong signals. Adhere to the money management rules.

\r\n

Description

\r\n

The Color Stochastic with an analytical panel indicator consists of the Stochastic indicator itself and the information/analytics panel. The indicator provides options for configuring the parameters and adjusting the colors. You can customize the color scheme, thickness and appearance of the lines. The information/analytics panel displays the values of the %K and %D lines of the Stochastic, as well as their difference for different periods. The bottom of the panel displays trading recommendations.

\r\n

No Trade - stay out of the market.
Weak BUY/SELL Signal - weak buy/sell signal. Trading this signal is not recommended. It usually means a corrective movement.
BUY/SELL Signal - buy/sell signal. It is recommended to open positions.
Strong BUY/SELL Signal - strong buy/sell signal. It is highly recommended to open positions.

\r\n

The Keep... recommendations indicate a continuation of the corresponding trend. Keep your position and increase profits.

\r\n

The indicator allows selecting M30, H1, H4 or D1 as the working period. Thus, with this indicator you will be able to trade both with a day and during multiple days and weeks. Users can customize the color scheme of the information/analytics panel. The default settings are as follows.

\r\n

Black dot - indicator values are in the neutral zone.
Red down arrow - Stochastic is in the overbought zone. A downward reversal is expected.
Green up arrow - Stochastic is in the oversold zone. An upward reversal is expected.

\r\n

Red and green colors mean a decrease and an increase in the indicator values relative to the previous ones.

\r\n

Working with the indicator

\r\n

The Color Stochastic with an analytical panel indicator provides tremendous opportunities for analyzing the market situation and making trading decisions. But even if you do not have this experience, you can work effectively using the recommendations. Below are some tips that will help you in analyzing the market situation.

\r\n

Change in the color of the Stochastic lines indicates a market reversal.
Position of the Stochastic above/below the 50 level indicates an uptrend/downtrend.
The sto_overbuy and sto_oversold parameters allow setting a filter, where the buy/sell signals are to be ignored.
The signals from the working periods (M30, H1, H4, D1) should be taken only in the context of the tendencies on the higher periods. The smaller periods serve as confirmation of the signals from the working periods. For this purpose, you can use divergence, position of the indicator relative to the 20, 50, 80 levels, the development of the Stochastic rise/fall during a certain period.
The more values of the same color are present in the Variance column, the stronger the signal and the stronger the market impulse.
The more periods are in the overbought/oversold areas, the more probable is the previous movement to end and change.
A change in the trend on the smaller periods indicates that the tendency on the higher periods will change soon.

\r\n

It should be noted that the Color Stochastic with an analytical panel indicator alone is not sufficient for a successful trading. Make sure you use trend indicators and support/resistance levels in your trading.

", "url": "https://www.mql5.com/pt/market/product/24605", "small_icon": "https://c.mql5.com/31/194/color-stochastic-with-an-analytical-panel-logo-60x60-3108.png", "middle_icon": "https://c.mql5.com/31/440/color-stochastic-with-an-analytical-panel-logo-140x140-8394.png", "icon": "https://c.mql5.com/31/194/color-stochastic-with-an-analytical-panel-logo-200x200-7503.png", "rating": 5, "price": 65, "published": 1502211150, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24467, "title": "Fifth dimension", "description": "

The indicator looks for the \"Fifth dimension\" trade signals and marks them on the chart. A detailed description of the chart patterns that generate the trade signals can be found in Chapter 8 \"The Balance Line Trades\" in the book Williams' \"New Trading Dimensions\". Signal levels with indication of the position entry or stop loss placement price are indicated directly on the chart. This feature creates additional convenience for the trader when placing pending orders. A solid horizontal line is displayed in case a signal level is broken. A dashed line on the chart indicates a level, the breakout of which may change the market trend. A vertical dashed line is drawn from the High (Low) of the basic bar to the signal level.

\r\n

Settings

\r\n

bShowLine=true - show the signal lines, false - hide the signal lines.
bShowLevel=true - show the prices of the signal levels, false - hide the prices of the signal levels.
bAlert=true - show alerts about a breakout of the signal level, false - disable the signal block.
bPush=false - send Push notifications about a breakout of the signal level, false - disable the signal block.
bMail=false - send email notifications about a breakout of the signal level. false - disable the signal block.
BuyLevel=clrLimeGreen - color of the buy level line.
SellLevel=clrRed - color of the sell level line.
BWZoneFilter=true - enable the AO and AC indicators based filter of zones.
maPeriod=13 - parameter of the balance line, \"Teeth\" line of the Alligator indicator.
maShift=8 - parameter of the balance line shift, \"Teeth\" line of the Alligator indicator.
maMethod - smoothed method to draw the balance line (Alligator \"jaw\" line).
maPrice - median price, price applied for the balance line.
BWZoneFilter=true - enable consideration of signal zones based on the АО and АС indicators.

\r\n

The Balance Line Trades (\"The fifth market dimension\")

\r\n

The balance line shows the direction of the current path of least resistance for the movement of prices in the market. Therefore, buying is recommended when the price is located above the balance line and selling is advised if the current price is below the balance line. An opposite signal may serve as the stop loss level for the open deals. In addition, it is beneficial to look for the position entry points when the price is in the immediate vicinity of the balance line, while the histogram of the Awesome Oscillator is located near the zero line. Due to this, it is recommended to use the Alligator, Super AO and AC indicators in the template. An additional zoning filter available in the indicator should be used when trading. Works on all time frames. However, the author of the strategy recommends trading using the daily range.

", "url": "https://www.mql5.com/pt/market/product/24467", "small_icon": "https://c.mql5.com/31/193/fifth-dimension-logo-60x60-9523.png", "middle_icon": "https://c.mql5.com/31/445/fifth-dimension-logo-140x140-4620.png", "icon": "https://c.mql5.com/31/193/fifth-dimension-logo-200x200-1373.png", "rating": 5, "price": 0, "published": 1501601504, "popularity": 0.6888008519338927, "category": "Indicator", "votes": 3 }, { "id": 24503, "title": "TSO Fibonacci Chains MT5", "description": "

Fibonacci retracement is a method of technical analysis for determining support and resistance levels. The TSO Fibonacci Chains Indicator is different from a simple Fibonacci Retracements indicator in that it provides the targets for each retracement level. In other words, there is an Extension Level (D) for every Retracement Level (C). In addition, if an Extension Level is reached, then a new Fibonacci setup is created automatically. These consecutive Fibonacci setups create a chain that reveals very useful information about an asset and it helps to make better trading decisions.

SCANNER is included. Now with Fibonacci Scanner you can find trading opportunities and trading setups easily and faster.

How it works:

The indicator scans the whole graph to detect points of highest and lowest price level.
It then starts calculating Fibonacci chains up until today.
On the graph, only the latest Uptrend and Downtrend Fibonacci chains are shown

Fibonacci Levels:

Α: Low (Uptrend) / High (Downtrend)
B: High (Uptrend) / Low (Downtrend)
C: Retracement (always at the lowest LOW (uptrend) or highest HIGH (downtrend) within the A-B range)
D: Extension (Target)

C Retracement Levels and D Extension Levels:

38.2% - > 1.618%
50.0% - > 1.618%
61.8% - > 1.618%
78.6% - > 1.270%
86.0% - > 1.180%

Fibonacci calculation

When the A, B and C levels have been formed followed by a HIGH/LOW* at the corresponding D Level, then the current Fibonacci block is considered complete and a new block is started.
The A and B levels of the new Fibonacci block are based on the previous block, i.e. Α_new = C_old and B_new = D_old. This way, a chain of consecutive Fibonacci blocks is formed, with the last block being the active one.
The chain is broken when the price moves below (uptrend) or above (downtrend) the A level of the last Fibonacci block.

*a HIGH/LOW occurs when the third (middle) candle out of 5 consecutive candles has a higher/lower HIGH/LOW than the two candles before and after it.

Strategies

First two steps for any strategy

Locate the latest valid (containing at least 2 complete Fibonacci blocks) uptrend and downtrend Fibonacci chains.
Select the one that is dominant, i.e. the direction (uptrend or downtrend) that contains the most completed Fibonacci blocks in its latest chain.

Conservative

For the dominant chain find previous support/resistance levels close to the C levels (61.8%, 78.6% and 86.0%)*
Wait for a LOW/HIGH to be created on these levels (if the Uptrend or Downtrend Fibonacci chain is dominant respectively)
If the above criteria are met, enter using an entry strategy such as a candlestick pattern, a trend line break, a crossing moving average (e.g. 5-period and 10-period MAs) etc.
The safest level for the Stop Loss is a few pips above (downtrend) or below (uptrend) the A level of the last Fibonacci block. The Take Profit should be placed at the corresponding D level.

Stop Loss and Take Profit can also be set as in step 3 of the Aggressive Strategy.

Aggressive

For the dominant chain, wait for a C LOW/HIGH (Uptrend/Downtrend Fibonacci chain respectively) to be formed at any Fibonacci Level.
If the above criteria are met, enter using an entry strategy such as a candlestick pattern, a trend line break, a crossing moving average (e.g. 5-period and 10-period MAs) etc.
Place the Stop Loss a few pips above the current LOW (uptrend) or below the current HIGH (downtrend) and a Take Profit at the corresponding D Extension level or at a distances 2-3 times larger than the stop loss (Risk/Reward Ratio 1:2 or 1:3)
If the above criteria are met more than once, create additional positions with Stop Loss and Take Profit levels as described in step 3.
In case a position is closed due to the price level reaching the Stop Loss, open the same position again if the same criteria are met again.

Very Aggressive

For the dominant chain, place pending orders at multiple Fibonacci Levels (e.g. 61.8%, 78.6% and 86.0%).
Place the Stop Loss a few pips above (downtrend) or below (uptrend) the A level of the latest Fibonacci block. The Take Profit should be placed at the corresponding D level (1.270%).
Follow this procedure for every new Fibonacci created.

", "url": "https://www.mql5.com/pt/market/product/24503", "small_icon": "https://c.mql5.com/31/192/tso-fibonacci-chains-mt5-logo-60x60-3460.png", "middle_icon": "https://c.mql5.com/31/445/tso-fibonacci-chains-mt5-logo-140x140-1885.png", "icon": "https://c.mql5.com/31/192/tso-fibonacci-chains-mt5-logo-200x200-6416.png", "rating": 0, "price": 199, "published": 1501506995, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24426, "title": "TSO Top Bottom Divergence MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with RSI divergence detection.

\r\n

Features

\r\n

Easily detect strong reversal signals.
Allows to use double top/bottom and RSI divergence signals combined or independently.
Get email and/or push notification alerts when a signal is detected.
Custom colors can be used.
The indicator is not repainting.
Can easily be used in an EA. (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the RSI divergence indicator.
RSI Period: Set the period of the RSI.
RSI Applied Price: The bar price to be used for RSI calculations.
Relationship between Double Top-Bottom and RSI Divergence:

Combined: All Double Top - Bottom signals are shown but only the RSI Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and RSI Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If RSI Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

RSI value: Buffer = 0
Divergence Signal: Buffer = 1

Buy = 0
Sell = 1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy = 0
Sell = 1

", "url": "https://www.mql5.com/pt/market/product/24426", "small_icon": "https://c.mql5.com/31/191/tso-top-bottom-divergence-mt5-logo-60x60-2861.png", "middle_icon": "https://c.mql5.com/31/439/tso-top-bottom-divergence-mt5-logo-140x140-1116.png", "icon": "https://c.mql5.com/31/191/tso-top-bottom-divergence-mt5-logo-200x200-2019.png", "rating": 0, "price": 39, "published": 1501506987, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24410, "title": "TSO Moving Average Slope MT5", "description": "

The Moving Average Slope (MAS) subtracts the moving average level n-periods ago from the current moving average level. This way, the trend of the moving average can be drawn on the moving average line.

Features

Observe uptrends and downtrends at a glance.
The indicator is non-repainting.
Returns buffer values for the trend of the moving average to be used as part of an EA. (see below)

Inputs

Moving Average Period: The period of the moving average (MA).
Slope Period: Number of periods between the current MA level and the previous MA level.
Include Last Bar: Include the bar being drawn in the MA calculation.
UpTrend: Positive trend colour.
DownTrend: Negative trend colour.
NonTrend: No trend colour.

For EA Developers

The indicator can be easily used as part of an EA. Buffer for trend type = 2.

Buffer value = 0: uptrend
Buffer value = 1: downtrend
Buffer value = 2: no trend

", "url": "https://www.mql5.com/pt/market/product/24410", "small_icon": "https://c.mql5.com/31/191/tso-moving-average-slope-mt5-logo-60x60-5150.png", "middle_icon": "https://c.mql5.com/31/444/tso-moving-average-slope-mt5-logo-140x140-3362.png", "icon": "https://c.mql5.com/31/191/tso-moving-average-slope-mt5-logo-200x200-5119.png", "rating": 5, "price": 0, "published": 1501506979, "popularity": 0.32161715614237363, "category": "Indicator", "votes": 3 }, { "id": 24292, "title": "Demand And Supply Diagram MT5", "description": "

The balance of supply and demand is a simple and effective market analysis method.

\r\n

The supply and demand diagram can show you in advance, even before the trend reversal, where the supply ends and the demand is already emerging, where the demand ends and the supply is emerging, while substantially increasing the probability of making a deal in the right direction and with a high profit factor.

\r\n

Indicator signals

\r\n

The indicator uses the price/volume values to generate signals:

\r\n

ED – excess demand.
ES – excess supply.
ND – no demand (accompanied by a warning message \"Sell area\").
NS – no supply (accompanied by a warning message \"Buy area\").

\r\n

It also monitors the sequence of these signals, determines the elasticity of demand/supply to the price and gives a confirmation message \"Buy point\" or \"Sell point\".

\r\n

Input Variables

\r\n

Alerts – enables/disables additional showing of signals in the alert window, as well as additional push messages.
Advise - enables/disables trading tips.
Labels – enables/disables the display of signal labels on the chart.
Viewing – enables/disables the full display of the diagram (Alerts and Advise retain their functionality, if they are enabled).
Position – location of the diagram along the time scale.
Average - calculation mode of the diagram's midpoint, moving average or weighted average based on volume.
Deviation - calculation mode of the diagram's amplitude, the maximum or standard deviation.
Signal - data set (supply and demand and/or total volume) to be used for generation of the trade signal.
Reverse - enable/disable the diagram calculation mode in terms of limit orders.
ExcessValidate - the mode of tracking subsequent chains of signals, this option works as a filter.
ElasticityValidate - check the elasticity of supply/demand to the price, with selection of the position opening type; the option acts as an additional filter.
Profile - calculation mode of volume profile: normal profile, difference profile and profile of open interest, mathematically obtained by successively zeroing the mutually exclusive volumes.
Timing - diagram recalculation frequency.
Volumes – type of volumes, tick or real if provided by the broker.
TfShift – shift of the applied period.
Correlation - enable/disable the mode of checking the correlation between the trade signals of the current and the higher timeframes.
LowLevelValue – below this value the volume is considered as low, in percent.
LowestLevelValue – below this value the volume is considered as very low, in percent.
HighLevelValue - above this value the volume is considered as high, in percent.
HighestLevelValue - above this value the volume is considered as very high, in percent.
PeriodForXX – an arbitrary period for a specific timeframe.
DurationParts – the number of the diagram sectors along the time scale.
StandardDeviations - standard deviation mode multiplier.
ProfileMaxLengthPix - limit on the profile length in pixels.
LeftShiftPix – shift of the diagram to the left, in pixels.
WidthPix – width of the diagram, in pixels.
FontSize – font size.

\r\n

The remaining inputs refer to line color and width settings, and their purpose is clear from their names.

\r\n

Operation features

\r\n

The presence of a \"Buy point\" / \"Sell point\" is expressed by a text message, and also accompanied by a flashing of the relevant price tag. Only these two combinations together should be perceived as a valid presence of the signal.

\r\n

The full recalculation of the diagram is performed according to the Timing variable, a signal is checked on every tick.

\r\n

A line with a width of zero is not displayed and not considered in the formation of signals.

\r\n

You can scroll the chart and view its historic diagram and signals.

\r\n

Alerts and trading tips are given for the periods ranging from current and higher.

\r\n

The volumes on the diagram are cumulative and normalized to the percentage calculation.

", "url": "https://www.mql5.com/pt/market/product/24292", "small_icon": "https://c.mql5.com/31/190/demand-and-supply-diagram-mt5-logo-60x60-3968.png", "middle_icon": "https://c.mql5.com/31/447/demand-and-supply-diagram-mt5-logo-140x140-1433.png", "icon": "https://c.mql5.com/31/190/demand-and-supply-diagram-mt5-logo-200x200-4712.png", "rating": 5, "price": 35, "published": 1501231142, "popularity": 4.27141193054554, "category": "Indicator", "votes": 7 }, { "id": 24356, "title": "Modified TTM Squeeze Indicator MT5", "description": "

\r\n

\"The Squeeze indicator attempts to identify periods of consolidation in a market. In general the market is either in a period of quiet consolidation or vertical price discovery. By identifying these calm periods, we have a better opportunity of getting into trades with the potential for larger moves. Once a market enters into a \"squeeze,\" we watch the overall market momentum to help forecast the market direction and await a release of market energy.\"

\r\n

The Modified TTM Squeeze Indicator is a modification of John Carter's TTM Squeeze volatility indicator, designed to give faster entry points than the original. This indicator is designed to identify both entry and exit points for major price movements. Green and red histograms depict upward and downward price movements, respectively. Darker histogram bar colors indicate that the trend is fading. Black crosses on the midline signify price squeezes, while grey crosses signify a release from squeeze. Trade in the direction of the trend on the first grey cross after a squeeze. Exit when trend fades (darker green/red).

\r\n

Do you prefer the original TTM Squeeze? This Modified TTM Squeeze Indicator allows you to switch between modified and traditional squeeze indicators.

\r\n

Trading Strategies

\r\n

There are many trading strategies described for the TTM Squeeze indicator, all of which can also be used with the Modified TTM Squeeze indicator. A simple effective strategy is described below:

\r\n

Wait for a squeeze period, which lasts at least 3 bars
On the first grey bar (release from squeeze), trade in the direction of the trend. (i.e., if the Modified TTM Squeeze value is above zero, place a call; if the indicator value is below zero, place a put)
Exit trade when price enters the next squeeze (risky) or when the trend fades, indicated by darker green/red histogram bars (conservative)

\r\n

An excellent setup is when two or more major timeframes are in a squeeze. Enter the trade when the lower timeframe is released from the squeeze. For example, both 15min and 5min periods are in a squeeze period. Enter trade when 5min period is released from squeeze. While squeeze patterns in higher timeframes generally indicates a larger move, anecdotally in forex, TTM squeeze works best on the 4 hour period and shorter.

\r\n

The Modified TTM Squeeze also pairs well with ADX indicators.

\r\n

Parameters

\r\n

BB length (Default=20): Number of bars used to calculate Bollinger Bands, used for squeeze
BB multiplier (Default=2.0): Number of standard deviations used for Bollinger Bands
KC length (Default=20): Number of bars used to calculate Keltner Channel, used for squeeze
KC multiplier (Default=1.5): Multiplier used for Keltner Channel
Use original TTM (Default=false): If true, changes indicator to the traditional TTM squeeze. If false, the indicator uses the modified TTM squeeze, with improved momentum calculation
Allow alerts (true/false): If false, prevents any alerts
Alert when squeeze begins (true/false): If true, sends alert on squeeze onset
Alert when squeeze is released (true/false): If true, sends alert when squeeze is released
Alert when trend fades (true/false): If true, sends alert when up or downtrend fades (as indicated by a darker green/red line on histogram)
Turn on alert message (true/false): If true, alerts will create a message box
Turn on alerts sound (true/false): If true, alerts will play a sound
Turn on alerts email (true/false): If true, alerts will send an email

", "url": "https://www.mql5.com/pt/market/product/24356", "small_icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-60x60-3980.png", "middle_icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-140x140-2218.png", "icon": "https://c.mql5.com/31/676/modified-ttm-squeeze-indicator-mt5-logo-200x200-9945.png", "rating": 5, "price": 149, "published": 1500987046, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24400, "title": "Average True Power MT5", "description": "

Strongest and Weakest Currency Analysis

\r\n

This product shows the strength of the main currencies in FOREX based on average pip gain/loss in different time-frames!

\r\n

Depending on the strength of the currency, the indicator colors changes from blue to red also the orders may also be changed, allowing you to find the strongest and weakest currency at a glance!

\r\n

Advantages

\r\n

Whatever your trading method and strategy are, it is always important to choose the correct pairs, so this indicator will help you answer this question by calculating the average pip gain/loss of each currency and also help you to find the direction of the trends!

\r\n

Features

\r\n

Shows the power of 8 main currencies in FOREX.
Shows powers in different time-frames from M1 to Daily.
For the sake of comparison it also shows the power of Yesterday!
Easy, nice and user-friendly interface which help you monitor the market live!
It shows the average pip gain/loss of each currency in different periods.
It sorts the currencies in each period based on the power of them, so the strongest one is always on top and the weakest one is in the lowest level.

\r\n

Input Parameters

\r\n

You can put the indicator on any Currency pairs (Suggested EURUSD) and on any Time-frames (Suggested M1).

\r\n

BackGround – You can set your favorite color for panel-background, default is Black;
Time_frames – You can set your favorite color for time-frames, default is Gold;
Bullish – You can set your favorite color for Bullish currency, default is DodgerBlue;
Bearish – You can set your favorite color for Bearish currency, default is Red;

\r\n

Notes

\r\n

When the color of the value is red, it means it is less than zero (we don’t show the minus sign).

", "url": "https://www.mql5.com/pt/market/product/24400", "small_icon": "https://c.mql5.com/31/191/average-true-power-mt5-logo-60x60-9213.png", "middle_icon": "https://c.mql5.com/31/441/average-true-power-mt5-logo-140x140-9152.png", "icon": "https://c.mql5.com/31/191/average-true-power-mt5-logo-200x200-6857.png", "rating": 0, "price": 100, "published": 1500980955, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24408, "title": "TSO Stochastic RSI MT5", "description": "

Stochastic RSI makes a stochastic calculation on the RSI indicator. The Relative Strength Index (RSI) is a well known momentum oscillator that measures the speed and change of price movements, developed by J. Welles Wilder.

\r\n

Features

\r\n

Find overbought and oversold situations.
Sound alert when overbought/oversold level is reached.
Get email and/or push notification alerts when a signal is detected.
The indicator is non-repainting.
Returns buffer values for %K and %D to be used as part of an EA. (see below)

\r\n

Basic Strategy

\r\n

Look for shorts when the price rises above the upper boundary.
Look for longs when the price falls below the lower boundary.

\r\n

Inputs

\r\n

RSI Period: Typically set to 14
%K period: Typically set to 8
%K Smoothing Period: Set to 1 for the default %K calculation. Set a higher value to have %K smoothed using an X-period Simple Moving Average (SMA). This also affects %D since it is the SMA of %K.
%D period: Typically set to 5

\r\n

For EA Developers

\r\n

The indicator can be easily used as part of an EA.

\r\n

Buffer for %D value = 0
Buffer for %K value = 1

", "url": "https://www.mql5.com/pt/market/product/24408", "small_icon": "https://c.mql5.com/31/191/tso-stochastic-rsi-mt5-logo-60x60-7632.png", "middle_icon": "https://c.mql5.com/31/438/tso-stochastic-rsi-mt5-logo-140x140-8266.png", "icon": "https://c.mql5.com/31/191/tso-stochastic-rsi-mt5-logo-200x200-4038.png", "rating": 4.5, "price": 0, "published": 1500980275, "popularity": 1.691109915171842, "category": "Indicator", "votes": 2 }, { "id": 24269, "title": "Orders Indicator Base MT5", "description": "

i-Orders is a simple indicator to monitor your own trade/analyze others' trades.

I use it for a long time and do not imagine a chart without these arrows, lines and trade result numbers.

Features

disable display of opened and closed positions (Show OPENED, Show CLOSED, Show PENDING),
change colors of arrows and lines for profitable and loss-making buy and sell positions separately (Color for profitable/losing BUYs/SELLs),
change style and width of the lines connecting deal open and close points (Open-Close lines width, Open-Close lines style), add text labels on that points (Open price labels width, Close price labels width),
enable display of a profit in a deposit currency, points or % (Show profit in money/points/percents), configure profit display accuracy (Number of digits to show),
change text font and size (Font, Font size),
enable profit in points (Show profit in points),
mark stop loss and take profit levels by dashes (Show SL and TP dashes) and connect them to the Open price by the configurable line (SL and TP vertical lines width, SL and TP vertical lines style),
display expiration time of pending orders (if specified) as lines (Expiration lines width/style) with a text comment (Expiration comment),
display trades only with a specified MagicNumber,
limit the displayed history depth to save PC computing resources (Max history deals),
track cent accounts converting profit into USD.

", "url": "https://www.mql5.com/pt/market/product/24269", "small_icon": "https://c.mql5.com/31/620/orders-indicator-base-mt5-logo-60x60-9681.png", "middle_icon": "https://c.mql5.com/31/620/orders-indicator-base-mt5-logo-140x140-3233.png", "icon": "https://c.mql5.com/31/620/orders-indicator-base-mt5-logo-200x200-1519.png", "rating": 0, "price": 33, "published": 1500915114, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24142, "title": "Fractal Levels MTF for MT5", "description": "

The indicator displays the fractal levels of one, two or three different higher timeframes starting beginning with the current one. When a new fractal appears, a new level is plotted. The indicator can be used for visual analysis of the current chart and applied in an EA. If more levels are needed, start a new instance of the indicator.

\r\n

Features

\r\n

The indicator works on any timeframe and symbol.
If a timeframe smaller than the current one is selected in the settings, the level of the current timeframe is displayed.
The ability to display the levels that are not price extremums (fractal) but are the closing levels of the candles (near fractal).
The block of various notifications when the price reaches the fractal level or crosses it (you can enable/disable each signal).

\r\n

Inputs

\r\n

Applied price: price used for drawing the levels. There are two options:

High_Low: High and Low prices (fractal);
Close_Close: candle closing price, nearest to the fractal;
\r\n When using the indicator in the EA, the High_Low parameter corresponds to the number 2, while Close_Close to number 3.

ON/OFF Smaller timeframes: enable/disable the first level;
ON/OFF Middle timeframes: enable/disable the second level;
ON/OFF Larger timeframes: enable/disable the third level;
Smaller timeframes: timeframe of the first level;
Middle timeframes: timeframe of the second level;
Larger timeframes: timeframe of the third level;
Pop-up alerts: enable/disable popup alerts in the terminal;
Sound alerts: enable/disable the sound alert;
Send alerts to Email: enable/disable email notifications;
Send Push alerts to mobile: enable/disable push notifications to the mobile terminal.

\r\n

The color and width settings are standard.

", "url": "https://www.mql5.com/pt/market/product/24142", "small_icon": "https://c.mql5.com/31/188/fractal-levels-mtf-for-mt5-logo-60x60-2528.png", "middle_icon": "https://c.mql5.com/31/439/fractal-levels-mtf-for-mt5-logo-140x140-9653.png", "icon": "https://c.mql5.com/31/188/fractal-levels-mtf-for-mt5-logo-200x200-9433.png", "rating": 0, "price": 27, "published": 1499696123, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23963, "title": "Pattern DejaVu", "description": "

This indicator predicts the nearest bars of the chart based on the search of up to three best coincided patterns (a sequence of bars of a given length) in the history of the current instrument of the current timeframe.

The found patterns are aligned with the current pattern at the opening price of the current (last) bar. The predicted bars are bars following immediately for patterns found in history.

Pattern search is performed once every time a new bar of the current timeframe opens. The indicator is not redrawn during the formation of a bar.

The coincidence error (in points) and the time of the pattern found are displayed in the lower right corner of the chart in the corresponding color. The coincidence error is calculated as the square root of the averaged sum of squared deviations of all OHLC prices of all bars in the pattern.

The indicator works with any timeframes and instruments (including stock exchange). It can be useful for predicting the market behavior and making decisions on trading operations.

For the indicator to find the most closely coincided patterns, it is necessary to provide the greatest possible depth of bars history.

You can test the operation of the indicator for free in the tester of the MetaTrader 5 terminal by downloading a demo version of the indicator.

Indicator Parameters

Pattern length - pattern length (positive integer value), i.e. the number of coincided bars of the desired pattern.
Count of predicted bars - the number of predicted bars (positive integer value).
Search for patterns - enumeration type parameter with the values one_best_coincided, two_best_coincided, three_best_coincided, which allows setting the number of the best coincided patterns to be searched in history (up to three).
Visualization mode of prediction - enumeration type parameter with the values show_bars_only, show_big_candle_only, show_big_candle_and_bars, which allows setting a visualization mode of prediction in the form of bars only, of big candle only (for Count of predicted bars > 1) or of bars and big candle at the same time (see screenshots below).
Show patterns - boolean parameter (true/false), indicating the need to display the found patterns.
History depth to search patterns (0 - all available) - history depth (the number of last bars) to search for patterns. If the parameter is set to 0, them all available history of bars is used. Keep in mind that increasing the history depth increases the time of finding patterns.
A set of parameters for setting the colors and line widths using to draw big candles. By default, the predicted bars are displayed in lighter tones relative to the colors of the corresponding patterns. The thickness of lines used to plot the bars of all three patterns are set to a single fixed value of 2. It is also possible to set different line widths (for example, 1, 3, 5) to display the full shape of bars of all three patterns (see screenshots below).

The indicator plots

1st best pattern - the found best coincided pattern with the least coincidence error with the current pattern. The indicator buffers 10 - 14 are used for plotting the bars of the pattern.
2nd best pattern - the second best coincided pattern with the next lowest coincidence error with the current pattern (indicator buffers 5 - 9).
3rd best pattern - the third best coincided pattern with the highest coincidence error with the current pattern of the three (indicator buffers 5 - 9).

", "url": "https://www.mql5.com/pt/market/product/23963", "small_icon": "https://c.mql5.com/31/186/pattern-dejavu-logo-60x60-8772.png", "middle_icon": "https://c.mql5.com/31/445/pattern-dejavu-logo-140x140-8629.png", "icon": "https://c.mql5.com/31/186/pattern-dejavu-logo-200x200-5992.png", "rating": 0, "price": 30, "published": 1499168998, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24025, "title": "StrongCurrency For Mt5", "description": "

This StrongCurrency is a complete trading system based on a variety of technical indicators, moving averages and pivots. Each of those elements can be assessed in defined rules and coefficients (depending on the indicator) providing limitless optimization scenarios for the StrongCurrency. In order to work the StrongCurrency creates a trend strength and entry point signal list display by evaluating these data, that takes data from all symbols. It extrapolates all the information in order to get the trend strength or weakness to take a decision on market. List data includes Symbol, BuyPercent, SellPercent, LastBuySignal, LastSellSignal. The LastBuySignal and LastSellSignal show entry points (price, time, currency pair to trend percent). When the trend intensity is greater than 70%, it is considered to be a strong currency pair. This tool works on the Forex Market and processing data on indices, metals, etc.

This tool works in any timeframe. It is useful for multi-currency trader, and its simplified information could give excellent input signals. It helps you to quickly and clearly find the strong and weak currency pairs. Please see screenshot.

Inputs Value

Text color = White - Normal text color.
Buy Signal color = LawnGreen - Long signal color.
Sell signal color = OrangeRed - Short signal color.
TimeFrame = H4 - This period covers all currencies. It is recommended to use H4-MN.
Entry_Percent = Min_70 - Trend percentage requirements 70% or more.
Wait_Mins_For_Next_Signal = 30 - Wait for the next time of signal.
ISALARM = false - Select true to display, select false not to display.

", "url": "https://www.mql5.com/pt/market/product/24025", "small_icon": "https://c.mql5.com/31/187/strongcurrency-for-mt5-logo-60x60-9908.png", "middle_icon": "https://c.mql5.com/31/440/strongcurrency-for-mt5-logo-140x140-2523.png", "icon": "https://c.mql5.com/31/187/multi-currency-logo-200x200-3510.png", "rating": 0, "price": 30, "published": 1499158071, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 21283, "title": "LineSyncMirrorCharts", "description": "

Indicator of correlation and divergence of currency pairs - all pairs on one price chart. It shows all pair that are open in the terminal. Full synchronization of all charts.

Does not work in the tester!

MT4 version

Advantages

Traders who use multicurrency trading strategies can visually observe the price movement of selected pairs on a single price chart in order to compare the parameters of their movement. This is an advanced and extended version of the OverLay Chart indicator

It is quite effective assistant for multicurrency trading - \"paired trading\" and \"portfolio trading\". It helps identify the emerging movements in advance.

The method consists of two strategies. The first one is designed to search for divergences between the currency pairs after a release of high-impact news or at the time the trading floors open. The logic of such operation is extremely simple. It is based on the assumption that once the \"storm\" in the market subsides, the delta between the price of instruments will begin to converge. It is recommended to pay attention to strong support and resistance levels, in order to avoid buying right under a strong resistance and selling at the very bottom.

Identification of false breakouts of the support/resistance levels.

Features

Invert any pair on the chart
Identify the regularities in history in the form of virtual buys or sells of multiple pairs
Calculates the distance in points the price had passed on the selected interval
Visually determine the strength of the currency movement
Select different display color for each currency pair
Display style: Bars, Candles, Lines, Heiken Ashi
Synchronization of timeframes and scrolling of all charts
Ability to trade any pair on one main chart
Alert when exceeding the price change in \"Points\" per \"Time\"

It can be conveniently used in conjunction with the \"CorrelatePairs\" indicator

Warning

The indicator should be placed on one chart!

Does not work in the tester!

See the video for more details

The EA used in the video is attached in the Comments section (attach to one chart only!)

", "url": "https://www.mql5.com/pt/market/product/21283", "small_icon": "https://c.mql5.com/31/206/linesyncmirrorcharts-logo-60x60-9564.png", "middle_icon": "https://c.mql5.com/31/447/linesyncmirrorcharts-logo-140x140-7763.png", "icon": "https://c.mql5.com/31/163/linesyncmirrorcharts-logo-200x200-4083.png", "rating": 4, "price": 85, "published": 1498822546, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 23769, "title": "Double Harmonic Volatility Indicator MT5", "description": "

Introduction to Double Harmonic Volatility Indicator

Use of the Fibonacci analysis for financial trading can nearly go back to 85 years from today since the birth of Elliott Wave Theory by R. N. Elliott. Until now, traders use the Fibonacci analysis to identify the patterns in the price series. Yet, we could not find any one attempted to use Fibonacci analysis for the Volatility. Harmonic Volatility Indicator was the first technical analysis applying the Fibonacci analysis to the financial Volatility. Originally, Harmonic Volatility Indicator was developed to overcome the limitation and the weakness of Gann’s Angle, also known as Gann’s Fan. We have demonstrated that Harmonic Volatility Indicator can be applied in a similar manner to Gann’s Angle (or Gann’s Fan) to your chart. At the same time, since the volatility is very important information for traders, Harmonic Volatility Indicator can bring many other benefits to traders too. One might use Harmonic Volatility indicator like the market profile to spot trend reversal point. More importantly, Harmonic Volatility Indicator can be well incorporated to your existing technical analysis to improve your trading. It is also very effective in spotting mature trend in its end phase. Bringing the Harmonic Volatility indicator further in its application level, Double Harmonic Volatility Indicator applies two Harmonic Volatility indicator in the significant peak and trough in your chart in the automatic manner. You can use this tool to identify the significant support resistance levels, trend reversal point and trend strength. To maximize your trading efficiency, we have added many automated features for your convenience.

How to Use

Double Harmonic Volatility indicator can be run in more than four different mode.

Double Harmonic Volatility mode – this mode uses two Harmonic Volatility indicator in the significant peak and trough.
Daily Harmonic Volatility mode – this mode apply Harmonic Volatility indicator to daily open price.
Weekly Harmonic Volatility mode – this mode apply Harmonic Volatility indicator to weekly open price.
Monthly Harmonic Volatility mode – this mode apply Harmonic Volatility indicator to monthly open price.
Beside above four modes, you can combine daily and weekly Harmonic Volatility indicator or weekly and monthly Harmonic Volatility indicator. If you want, you can combine daily, weekly and monthly harmonic volatility indicator at the same time.

Important User Inputs

There are four important inputs to change the mode of this indicator.

Use Double Harmonic Volatility- Set this input to true to run the indicator in double Harmonic Volatility mode. If you set this input to false, then indicator will run in to either daily, weekly or monthly Harmonic Volatility Mode.
Use Daily Harmonic Volatility – This input is only active if the Use Double Harmonic Volatility is set to false.
Use Weekly Harmonic Volatility - This input is only active if the Use Double Harmonic Volatility is set to false.
Use Monthly Harmonic Volatility - This input is only active if the Use Double Harmonic Volatility is set to false.

Note that most of time you can use the default setting for the other inputs.

Trading Principle

Most of average traders are trading without having the full picture of the market volatility. Double Harmonic Volatility Indicator can offer you more systematic picture towards the current market state. In spite of the fact that Harmonic Volatility indicator can bring you the many benefits for your trading, you will still need knowledge and discipline for your successful trading. This is not the bulletproof trading system.

Trading Strategy Guide

You can find the detaild trading strategy guide about how to use volatility indicator from the link below. We recommend to read this article before using this volatiltiy indicator for your trading.

https://www.mql5.com/en/blogs/post/750389

Important Note

This is the off the shelf product. Therefore, we do not accept any modification or customization request on this product. In addition, we do not provide any code library or any support for your coding for this product.

", "url": "https://www.mql5.com/pt/market/product/23769", "small_icon": "https://c.mql5.com/31/262/double-harmonic-volatility-indicator-mt5-logo-60x60-5204.png", "middle_icon": "https://c.mql5.com/31/438/double-harmonic-volatility-indicator-mt5-logo-140x140-8182.png", "icon": "https://c.mql5.com/31/262/double-harmonic-volatility-indicator-mt5-logo-200x200-8962.png", "rating": 5, "price": 60, "published": 1498821050, "popularity": 0.8325507886143649, "category": "Indicator", "votes": 1 }, { "id": 23794, "title": "Screen Shoter", "description": "

Indicator for \"screenshoting\" the chart at a specified interval.

\r\n

The files are saved in the \"MQL5\\Files\\ScreenShots\\Symbol TF\\\" directory and named as the date and time the screenshot was taken (2017.06.20 23.56.24.png)

\r\n

Settings:

\r\n

Width and Height — width and height of the saved screenshots,
IntervalSeconds — the saving interval in seconds.

\r\n

Attention! If you set a large size for screenshots and a high frequency, you may run out of space on the hard drive.

\r\n

Do not delete the folder where the screenshots are written, the indicator will only be able to recreate it only the next time it is started.

", "url": "https://www.mql5.com/pt/market/product/23794", "small_icon": "https://c.mql5.com/31/185/screen-shoter-logo-60x60-1063.png", "middle_icon": "https://c.mql5.com/31/439/screen-shoter-logo-140x140-1660.png", "icon": "https://c.mql5.com/31/185/screen-shoter-logo-200x200-8165.png", "rating": 5, "price": 0, "published": 1498755824, "popularity": 0.18877306472805874, "category": "Indicator", "votes": 1 }, { "id": 23734, "title": "Indicator Combine Merge MT5 by RunwiseFX", "description": "

Allows multiple indicators to be combined into a single indicator, both visually and in terms of an alert. Indicators can include standard indicators, e.g. RSI, CCI, etc., and also Custom Indicators, even those purchased through Market, or where just have the ex4 file. An early alert is provided, say when 4 out 5 indicators have lined up, and a confirmed alert when all are in agreement.

A‌lso features a statistics panel reporting the success of the combined indicator by examining the current chart. The win rate, profit and draw down are calculated, based on a selected stop loss and take profit/exit regime. Results from other charts can also be shown together and ordered with the best performing symbols shown first - allowing cherry picking of best symbols/timeframes.

The product is easily configured using pop-up forms – see video. The product comes configured with example standard indicators.

Fully compatible with our range of EA panels, allowing easy conversion into an EA that can trade automatically.

‌‌Please see Comments tab (first entry) for link to the manual.

Features

Combines multiple indicators both visually and in terms of an alert
Works with standard indicators and Custom Indicators, even if just have ex4 file or those purchased from market
Indicators are examined on candle close, by default, so no repainting
Choice of two configurable alert levels - early (say when 75% of indicators lined-up) and confirmed (all lined-up)
Shows trade result statistics of combined indicators with win ratio, profit and draw down - calculated in real-time by examining the current chart
Option to show table of statistics from other charts/symbols that the indicator is loaded on to - ordered by profit
Results show outcome of both early and confirmed alert, so can see which is performing best
Option to automatically select early or confirmed alert, depending on which has the higher profit, or win ratio
Realistic calculation of statistics by taking into consideration a selected stop loss, take profit/exit regime and spread
Stop loss can be specified either as fixed pips or using a variety of automatic calculation methods, including from a custom indicator
Statistics can also include effect of trading hours, partial take profit/exit, trailing stop loss and auto break even when target reached
Optional Binary Options mode where statistics are worked out with expiry rather than SL/TP
Take profit and break even targets can be specified as either risk reward ratios or in pips
Pips can be optionally specified as a percentage of the Average Daily True Range, allowing it to automatically scale depending on the symbol
Shows simulated trades on the chart with open price, stop loss used, close price and profit
Automatic recalculation of statistics upon configuration changes, showing the effect on win ratio, profit and draw-down
One-click restore of previous configuration if change was not beneficial
Configured stop loss, break even and take profit prices are shown on chart for use with new trades
Easy to use configuration pop-ups
Choice of display formats, i.e. bar or histogram
Choice of alert methods, e.g. pop-up, email or mobile notification
Easy integration with our EAs for automated trading

‌Indicator Inputs

Use the CONFIG button to configure the system. Inputs are provided as an alternative and are fully described in the manual - see Comments tab for link to manual. Key inputs are explained below:

Main_alertConfirmedPercentage - Percentage of indicators that need to have lined-up for confirmed alert to happen
Main_alertEarlyPercentage - Percentage of indicators that need to have lined-up for early alert to happen
Main_alertResetLevel - How much indicator needs to go to other direction of alert reset to happen
Main_binaryOptionModeBars - If > 0 then number of bars before trade closes to simulate Binary Options

Using the Strategy Tester / Demo Version

Make sure the test is running at least at market speed for the buttons on the panel to work. Alerts appear in the Journal tab. Note, edit boxes don't work in MT5 visual Tester.

Converting Into an EA

Can easily be converted into an EA that can trade automatically with our Ultimate Trade Manager product.

", "url": "https://www.mql5.com/pt/market/product/23734", "small_icon": "https://c.mql5.com/31/184/indicator-combine-merge-mt5-by-runwisefx-logo-60x60-5377.png", "middle_icon": "https://c.mql5.com/31/440/indicator-combine-merge-mt5-by-runwisefx-logo-140x140-5453.png", "icon": "https://c.mql5.com/31/184/indicator-combine-merge-mt5-by-runwisefx-logo-200x200-1441.png", "rating": 5, "price": 149, "published": 1498653955, "popularity": 2.0621629847966796, "category": "Indicator", "votes": 1 }, { "id": 23663, "title": "AIS Multi Trend Forecast MT5", "description": "

This indicator studies the price action as a combination of micro-trends. All micro-trends are analyzed and averaged. Price movement is filtered based on this averaging.

\r\n

IP_High and IP_Low (blue and red dashed lines) show the instantaneous price movement. They display the forecast only for the current price values, taking into account only the number of bars defined by the 'Filter level' parameter.

\r\n

SP_High and SP_Low (blue and red solid lines) smooth the price movements with respect to history. Therefore, these lines reflect more global trends in the price action.

\r\n

Filter level - parameter that sets the number of bars to built the forecast. Valid values are from 1 to 255. This parameter defines the sensitivity of the indicator. The greater the value, the more prolonged trends will be considered in the indicator's operation.

\r\n

By selecting the values for this parameter, it is possible to make the indicator work in three modes:

\r\n

the indicator oscillates near the true value of prices. In this mode, you can track the change in trend movements of the market.
the indicator is almost always above the price level.
the indicator is almost always below the price level.

\r\n

The last two modes can be used in breakout strategies, as well as for setting the take profit and stop loss levels.

\r\n

Run the Helper for parameter selection AIS-MTF MT5 script to select the required value of 'Filter level'.

", "url": "https://www.mql5.com/pt/market/product/23663", "small_icon": "https://c.mql5.com/31/184/ais-multi-trend-forecast-mt5-logo-60x60-7212.png", "middle_icon": "https://c.mql5.com/31/446/ais-multi-trend-forecast-mt5-logo-140x140-1791.png", "icon": "https://c.mql5.com/31/184/ais-multi-trend-forecast-mt5-logo-200x200-7805.png", "rating": 0, "price": 30, "published": 1498648315, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 22420, "title": "Peak Trough Analysis Tool MT5", "description": "

Peak Trough Analysis is the great tool to detect peaks and troughs in your chart. Peak Trough Analysis tool can use three different peaks and troughs detection algorithm. The three algorithm include the orignal Fractals Indicator by Bill Williams, the Modified Fractals indicator and ZigZag indicator. You can use this peak and trough analysis tool to detect the price pattern made up from Equilibrium Fractal-Wave process. For further usage, there are good guide line on how to use this peak trough analysis tool in the chapter 11 in the book: Introduction to Price Action and Pattern Trading. This is a free tool and you can use this powerful tool for your own benefit at your own risk.

How to use

You can use in three mode.

Mode 1: The Fractals indicator by Bill Williams
Mode 2: The Modified Fractals indicator
Mode 3: Zig Zag indicator

To use Modified Fractals Indicator algorithm, set “Use Modified Fractals” = true.

To use for Zig Zag indicator algorithm, set “Modified Fractals” = false.

To use the original Fractals Indicator algorithm by Bill Williams, set “Use Modified Fractals” = true. Set N left = N right = 2.

Input Setting

1. Modified Fractals Setting

N left - N = number of bars counting to left
N right - N = number of bars counting to right

2. Zig Zag Setting

Use default setting unless you are familiar with ZigZag indicator.

ZigZag Depth
ZigZag Deviation
ZigZag Backstep

3. General Setting

Arrow Shift in Pixels - 10 = default
Use White Background Chart - true or false only
Enable sound alert - true or false only
Send email if peak or trough is found - true or false only
Send notification if peak or trough is found - true or false only

Trading Strategy Guide

Using Peak Trough Analysis is documented in the link below. It is highly recommended to read this article before trading.

https://www.mql5.com/en/blogs/post/750388

In addition, you can find the trading strategy guide from the links below:

Guide for Volume Spread Analysis: https://www.mql5.com/en/blogs/post/750390

Guide for Harmonic Pattern Detection Indicator: https://www.mql5.com/en/blogs/post/750344

Guide for Momentum Indicator: https://www.mql5.com/en/blogs/post/750346

Guide for Supply Demand Indicator: https://www.mql5.com/en/blogs/post/750386

Guide for Elliott Wave Indicator: https://www.mql5.com/en/blogs/post/750343

Guide for Volatility Indicator: https://www.mql5.com/en/blogs/post/750389

Important Note

", "url": "https://www.mql5.com/pt/market/product/22420", "small_icon": "https://c.mql5.com/31/262/peak-trough-analysis-tool-mt5-logo-60x60-2994.png", "middle_icon": "https://c.mql5.com/31/440/peak-trough-analysis-tool-mt5-logo-140x140-2712.png", "icon": "https://c.mql5.com/31/262/peak-trough-analysis-tool-mt5-logo-200x200-6186.png", "rating": 4.900000095367432, "price": 0, "published": 1498576966, "popularity": 5.1459182047883, "category": "Indicator", "votes": 10 }, { "id": 22871, "title": "Trend Sight", "description": "

The Trend Sight indicator shows the Moving Average's percent change from the current bar to the other selected bar allowing you to track the smoothed price change rate, as well as trend strength and change.

\r\n

The uptrend is shown as a blue indicator line, while a downtrend is displayed in red.

\r\n

Close a short position and open a long one if the line color changes from red to blue.

\r\n

Close a long position and open a short one if the line color changes from blue to red.

\r\n

You should use a tight stop loss, because the line color and direction can suddenly be changed.

\r\n

The indicator's Inputs tab allows you to select:

\r\n

Moving Average smoothing period
Moving average smoothing method (Simple, Exponential, Smoothed, Linear weighted)
Applied price (Close, Open, High, Low, Median, Typical, Weighted)
Shift of the Moving Average from the current bar to the other selected bar

\r\n

The Colors tab allows you to select the line color, width and style.

\r\n

Parameters

\r\n

period - MA period;
method - smoothing method (Simple, Exponential, Smoothed, Linear weighted);
applied price - choose value (Close, Open, High, Low, Median, Typical, Weighted);
shift - shift of the Moving Average from bar to bar at a distance of Shift.

\r\n

Note: if Shift is less than 1 or more than Period, the following alert appears: \"Incorrect Shift value. The indicator will use the value of Shift = Period.

", "url": "https://www.mql5.com/pt/market/product/22871", "small_icon": "https://c.mql5.com/31/185/trend-sight-logo-60x60-1757.png", "middle_icon": "https://c.mql5.com/31/441/trend-sight-logo-140x140-4068.png", "icon": "https://c.mql5.com/31/185/trend-sight-logo-200x200-6356.png", "rating": 0, "price": 30, "published": 1498207723, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23487, "title": "Effort and Result MT5 Indicator by PipTick", "description": "

The Effort and Result indicator is based on the work of Karthik Marar; a volume spread analysis trader.

It compares a price change (Result) to the volume size (Effort) for a certain period.

By comparing the effort and result, we can get more information about the future price movement. Both values are normalized and converted to a scale of 0 - 100 % based on a selectable look-back period.

This indicator is also known as the Effort Index.

The law of effort and result

The law of effort vs. result states that the change in the price of a trading vehicle is the result of an effort expressed by the level of volume and that harmony between effort and result promotes further price movement. In contrast, a lack of balance promotes a change in direction.

Main features

The indicator compares the change in price (Result) to the size of the volume (Effort).
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
Ready for backtesting (customizable Sessions_Back).
Customizable parameters (Colors, Line thickness...).
High-speed calculation.
Available for MT4 and MT5.

Please visit the Effort and Result indicator product page for the input and output parameters settings.", "url": "https://www.mql5.com/pt/market/product/23487", "small_icon": "https://c.mql5.com/31/775/effort-and-result-mt5-indicator-by-piptick-logo-60x60-3920.png", "middle_icon": "https://c.mql5.com/31/775/effort-and-result-mt5-indicator-by-piptick-logo-140x140-6399.png", "icon": "https://c.mql5.com/31/775/effort-and-result-mt5-indicator-by-piptick-logo-200x200-3614.png", "rating": 0, "price": 69, "published": 1497531750, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23468, "title": "Smooth Patterns", "description": "

Trading patterns on Forex is considered to be the highest level of trading, since it usually requires years of mastering various patterns (shapes and candle combinations) and the ways they affect the price.

\r\n

Patterns are different combinations of Japanese candles on a chart, shapes of classical technical analysis, as well as any regularities of the market behavior repeating many times under the same conditions. After the patterns appear on a chart, the price starts behaving in a certain way allowing us to make forecasts. This makes patterns a relatively secure and reliable trading method.

\r\n

This indicator is a result of many years of trading experience. You do not have to memorize multiple technical and candle patterns. All of them are present in the indicator. The product automatically defines various candle patterns and shapes, displays them on a chart and predicts the future price movement.

\r\n

The shortened pattern appears above or below the last bar of a detected pattern. All names have a certain color depending on where the price is expected to move after the pattern. If the pattern is bullish, its name under the bar is blue. If the pattern is bearish, its name above the bar is red.

\r\n

How to use

\r\n

Each new pattern is a signal for opening a position. If the pattern is red (above the bar), the price is about to fall. If the pattern is blue (under the bar), the price is about to grow.

\r\n

Enabling push notifications

\r\n

Make sure the indicator's \"Show Alert\" function is enabled. Also, go to Tools/Options/Notifications, tick the \"Enable Push notifications\" option and enter your MetaQuotes ID.

\r\n

Features
\r\n

\r\n

Very easy to use;
The EA works on any currency pair;
High signal accuracy;
Professional tool;
Defines many basic patterns;
Does not repaint signals from detected patterns.

\r\n

Attention! By default, all patterns and notifications are disabled to allow users to select necessary patterns for testing in the strategy tester. For further work, you need to enable ALL or most of the other patterns and notifications in the indicator settings.

\r\n

Parameters

\r\n

Use Extra Digit (false) - set true if your broker uses an additional digit in quotes;
Show Alert (false) - enable/disable notifications from all patterns.
Display ShootStar Pattern #1 (false) - enable/disable the display of the Shooting Star #1 pattern;
Show ShootStar Pattern Alert #1 (false) - enable/disable the alert for the pattern;
Color ShootStar (Red) - color of the shortened Shooting Star pattern name above the bars;
Display Hammer Pattern #1 (false) - enable/disable the display of Hammer #1;
Show Hammer Pattern Alert #1 (false) - enable/disable the alert for the pattern.

\r\n

All other parameters are set the same way. The only difference is in the names

\r\n

Recommendations

\r\n

It is not recommended using the indicator on timeframes lower than M15, since all data lower than M15 is used to plot patterns and candle combinations on higher timeframes.

\r\n

Enjoy your trade!

", "url": "https://www.mql5.com/pt/market/product/23468", "small_icon": "https://c.mql5.com/31/182/smooth-patterns-logo-60x60-8113.png", "middle_icon": "https://c.mql5.com/31/446/smooth-patterns-logo-140x140-2754.png", "icon": "https://c.mql5.com/31/182/smooth-patterns-logo-200x200-4185.png", "rating": 0, "price": 45, "published": 1497360890, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23546, "title": "T Channel", "description": "

T-Channel is a technical indicator defining the current Forex market status - trend or flat.

\r\n

The indicator is based on TEMA (Triple Exponential Moving Average). The advantage of the TEMA is that it provides a smaller delay than a moving average with a single or double smoothing.

\r\n

The indicator is able to work on any timeframes, but H1 and higher timeframes are recommended to minimize false signals.

\r\n

The indicator displays a channel as lines located above and below the middle line. The upper and lower lines can serve as the resistance and support levels.

\r\n

Sell when the price reaches the upper line, and buy when the price reaches the lower line.

\r\n

It is recommended to use a small stop loss to protect against false signals.

\r\n

The Inputs tab of the indicator allows to select:

\r\n

period of the indicator;
one of the seven types of applied price (Close, Open, High, Low, Median, Typical, Weighted);
horizontal shift of all lines on the chart;
vertical shift of the upper and lower lines relative to the middle line.

\r\n

The Colors tab allows to choose the color, width and line style of the indicator.

\r\n

Parameters

\r\n

period - number of bars used for the indicator calculations;
applied price - select from the seven applied price types;
shift - horizontal shift of all lines on the chart;
channel width - vertical shift of the upper and lower lines.

\r\n

T-Channel indicator is calculated by the following formulas:

\r\n

Upper Level = TEMA(N,P) + High(t)*CW/1000
Lower Level = TEMA(N,P) - Low(t)*CW/1000,

\r\n

where:

\r\n

Upper Level - the upper line of the channel;
Lower Level - the lower line of the channel;
TEMA - Triple Exponential Moving Average;
N - averaging period;
P - applied price (Close, Open, High, Low, Median, Typical, Weighted);
High(t) and Low(t) - the High and Low prices of the current period;
CW - channel width (vertical shift of the upper and lower lines relative to the middle line).

", "url": "https://www.mql5.com/pt/market/product/23546", "small_icon": "https://c.mql5.com/31/182/t-channel-logo-60x60-5543.png", "middle_icon": "https://c.mql5.com/31/446/t-channel-logo-140x140-4910.png", "icon": "https://c.mql5.com/31/182/t-channel-logo-200x200-8647.png", "rating": 0, "price": 30, "published": 1497347859, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23547, "title": "TEMA Trend", "description": "

The TEMA Trend indicator is based on two TEMA (Triple Exponential Moving Average) - fast and slow.

\r\n

The advantage of the TEMA is that it provides a smaller delay than a moving average with a single or double smoothing.

\r\n

The indicator allows determining the direction and strength of the trend, and it can work on any timeframe.

\r\n

Uptrends are shown by blue color of the indicator line, downtrends by the red color.

\r\n

Close a short position and open a long one if the line color changes from red to blue.

\r\n

Close a long position and open a short one if the line color changes from blue to red.

\r\n

Use a small stop loss, as the line itself may suddenly change its color and direction.

\r\n

The following can be set in the TEMA indicator's Inputs tab:

\r\n

period (Fast Period, Slow Period);
price used calculations (Close, Open, High, Low, Median, Typical, Weighted).

\r\n

The Colors tab allows to choose the color, width and line style of the indicator.

\r\n

Parameters

\r\n

fast period - the number of bars used for fast TEMA calculation;
fast applied price - applied price type for the fast TEMA;
slow period - the number of bars used for slow TEMA calculation;
slow applied price - applied price type for the slow TEMA.

", "url": "https://www.mql5.com/pt/market/product/23547", "small_icon": "https://c.mql5.com/31/182/tema-trend-logo-60x60-6934.png", "middle_icon": "https://c.mql5.com/31/440/tema-trend-logo-140x140-9269.png", "icon": "https://c.mql5.com/31/182/tema-trend-logo-200x200-4582.png", "rating": 0, "price": 30, "published": 1497347855, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 17537, "title": "PipFinite Cluster Helix MT5", "description": "

A combination of trend, pullback, range breakouts and statistics in one indicator

Mainly functions as an Entry indicator. Works in any pair and timeframe.

Suggested Combination

Cluster Helix with Strength Meter

Strategy: Confirm signals with ideal strength levels
Watch Video: (Click Here)

Features

Detects range breakouts on pullback zones in the direction of the trend
Analyzes statistics of maximum profits and calculates possible targets for the next signal
Flexible tool, can be used in many ways to improve a trading system
StopLoss Levels

Option 1: Range Levels

Below blue range box for buy signal
Above red box for sell signal

Option 2: Statistical Data

Buy Average Value for buy signal
Sell Average Value for sell signal

Option 3: Higher Value

Compare Option 1 and Option 2, Select the Higher Value

TakeProfit Levels

Option 1: Standard TakeProfit

Buy Average Value for buy signal
Sell Average Value for sell signal

Option 2: Quick Takeprofit for Scalping

Minimum Average Value

Avoid late range breakouts

RSI value below 70 for buy signals
RSI value above 30 for sell signals

Avoid trend weakness

Only take the first 3 consecutive signals in the direction of the trend
It is best to avoid the 4th signal and wait for the pullback zone to change color or reset
Please watch the video for better understanding (Click Here)

Exit Strategy

Exit will depend on traders discretion according to his/her strategy

Support/Resistance Areas
Reversal signals from price action patterns

We can use Exit Scope as alternate exit strategy

Supporting Tool

Confirmation to price action trading
Increase probabilities by combining to Strength Meter
Avoid false signals by combining to Volume Critical

Avoid buy signals if Volume Critical is Overbought
Avoid sell signals if Volume Critical is Oversold

Never repaints
Never backpaints
Never recalculates
Signals strictly on the \"Close of the bar\"
Compatible with Expert Advisor development

Day Trading Strategy (M15)

Buy Setup

H4 Timeframe shows bullish pullback zone (green zone). Go to M15 timeframe for entries
M15 Buy Signal
Strength Meter Bullish Level 1 to Level 3 only (Use Period = 20 for settings)
RSI is below 70
Set your stoploss

Option 1: Above the blue range box
Option 2: Buy Average value
Option 3: Select the higher value from Option 1 and 2

Set yout takeprofit

Option 1: Use average Buy Average value
Option 2: For scalping, use Min Average value

Sell Setup

H4 Timeframe shows bearish pullback zone (red zone). Go to M15 timeframe for entries
M15 Sell Signal
Strength Meter Bearish Level 1 or Level 3 only (Use Period = 20 for settings)
RSI above 30
Set your stoploss

Option 1: Below the red range box
Option 2: Sell Average value
Option 3: Select the higher value from Option 1 and 2

Set yout takeprofit

Option 1: Use average Sell Average value
Option 2: For scalping, use Min Average value

Scalping Strategy (M5)

Same as Day Trading Strategy but

H1 as Higher Timeframe
M5 as Entry Timeframe
Strength Meter Period = 14 for settings

Swing Strategy (H1)

Same as Day Trading Strategy but

D1 as Higher Timeframe
H1 as Entry Timeframe
Strength Meter Period = 7 for settings

Additional Guidelines

Trade only London and US session for best breakout volatility
Avoid signals 30 mins before and after major news releases
Skip the 4th and succeeding signals. Wait for a reset to avoid trend weakness

Video References

Please Watch in High-Definition to further understand

How it works (Click Here)
How to trade (Click Here)
How to avoid trend weakness (Click Here)
Combining to Strength Meter (Click Here)

", "url": "https://www.mql5.com/pt/market/product/17537", "small_icon": "https://c.mql5.com/31/129/pipfinite-cluster-helix-mt5-logo-60x60-4257.png", "middle_icon": "https://c.mql5.com/31/443/pipfinite-cluster-helix-mt5-logo-140x140-5907.png", "icon": "https://c.mql5.com/31/129/pipfinite-cluster-helix-mt5-logo-200x200-8369.png", "rating": 5, "price": 88, "published": 1497346801, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 23530, "title": "Market Trending plus Alert by RunwiseFX", "description": "

Shows whether market is trending or not, to what extent, which direction, and if the trend is increasing. The indicator is very useful for trend following strategies, where it can filter out flat/choppy markets. The indicator can also alert when the market transitions from being flat to trending, which can serve as a great trade entry point. The alert is controllable directly from the chart, via a tick box.

Also, the product includes bonus indicators of the current spread and ask/bid prices in large text, color coded as price changes.

Usage

Trade entry should be made when the indicator line is above the 100 level, i.e. not yellow, and the vertical histogram bars are present and of the same color. The histogram bars appear when the direction is confirmed. If purple, then the direction is confirmed but the trend is weakening. Green color signals buy/long and red signals sell/short. Do not open a trade if no histogram bars are present.

Early entry: An early entry could be considered if either the green/red vertical histogram bar is present but the indicator line is still yellow, or the histogram bar is purple but the indicator line is above 100, i.e. colored green/red.

The optional alert is controlled via the chart tick box, by default shown on the bottom left of the chart. The alert will be raised when the market transitions from flat to trending. The number of pips since the alert was raised is shown in the panel. The alert can be set to pop-up, play wav file sound, email or notification.

A bonus spread indicator will show the current spread, which can be configured to change color if the spread has gone too high. Also, current ask/bid prices can be shown in big text. The prices will be colored green if gone up, red if gone down or yellow if stayed the same. The indicators are optional and fully configurable.

Inputs

Main_alertOnDefault - set to true for alert to be on by default when indicator is placed onto a chart
Main_alertShowPriceLine - if set to true, it will show horizontal price line on chart of the price when an alert is raised
Main_alertLineStyle - line style of the above alert price line
Main_alertThreshold - indicator value when alert happens. Default is 100 (trending confirmed)
Main_histogramThreshold - indicator value when the histogram appears. Default is 90 (trending likely)
Col_alertSell - color of alert price line in case of a sell alert
Col_alertBuy - color of alert price line in case of a buy alert
Box_corner - which corner of the chart to show the alert's control panel. Default is bottom left
Box_X - X co-ordinate of where to show the alert's control panel
Box_Y - Y co-ordinate of where to show the alert's control panel
Gen_GUIFontSize - font size for label on control panel
Gen_GUIFont - font name used on control panel
Gen_lineLabelFontSize - font size of text label used on horizontal price lines
Gen_alertPopUp - if true, then will alert via pop-up window (note, on strategy tester will appear in the Journal)
Gen_alertSound - if true, will alert via playing a wav file
Gen_alertSoundWavFile - wav file fame, use if Gen_alertSound is set to true
Gen_alertMail - if true, then will alert via email, as configured in your MetaTrader terminal
Gen_alertNotification - if true, then will alert via push notification, as configured in your MetaTrader terminal
Gen_colorLabel - color used for labels in the control panel
Gen_colorSell - general color to use for sell
Gen_colorBuy - general color to use for buy
Gen_colorSellBuy - general color to use when transitioning from buy/sell
Gen_askBidPricesShow - if true, when will show ask/bid prices on the chart
Gen_askBidPricesCorner - which corner of the chart to show the ask/bid prices
Gen_askBidPricesX - X co-ordinate of ask/bid prices
Gen_askBidPricesY - Y co-ordinate of ask/bid prices
Gen_askBidPricesSizeAsk - font size of ask price
Gen_askBidPricesSizeBid - font size of bid price
Gen_spreadShow - if true, then will show the current spread
Gen_spreadCorner - which corner of the chart to show the spread

", "url": "https://www.mql5.com/pt/market/product/23530", "small_icon": "https://c.mql5.com/31/182/market-trending-plus-alert-by-runwisefx-logo-60x60-7713.png", "middle_icon": "https://c.mql5.com/31/445/market-trending-plus-alert-by-runwisefx-logo-140x140-8552.png", "icon": "https://c.mql5.com/31/182/market-trending-plus-alert-by-runwisefx-logo-200x200-8265.png", "rating": 0, "price": 39, "published": 1497272311, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23453, "title": "Trade Direction 5", "description": "

This simple indicator helps defining the most probable trend direction, its duration and intensity, as well as estimate the possible range of price fluctuations.

\r\n

You can see at a glance, at which direction the price is moving, how long the trend lasts and how powerful it is.

\r\n

All this makes the indicator an easy-to-use trend trading system both for novice and experienced traders.

\r\n

Parameters

\r\n

Period - averaging period for the indicator calculation.
Deviation - indicator deviation.
Lag - calculation base (number of bars).

\r\n

Indicator buffer numbers

\r\n

0 - BUY signal, 1 - SELL signal, 2 - upper level, 3 - lower level.

", "url": "https://www.mql5.com/pt/market/product/23453", "small_icon": "https://c.mql5.com/31/182/trade-direction-5-logo-60x60-3278.png", "middle_icon": "https://c.mql5.com/31/440/trade-direction-5-logo-140x140-6545.png", "icon": "https://c.mql5.com/31/182/trade-direction-5-logo-200x200-1184.png", "rating": 0, "price": 10, "published": 1497262380, "popularity": 0.13887245348286478, "category": "Indicator", "votes": 0 }, { "id": 23318, "title": "Elder Force Index With ATR Channels", "description": "

Adicionar canais Average True Range (ATR) ao Índice de Força foi sugerido por Kerry Lovvorn. Adicionar esses canais transforma o Force Index em uma excelente ferramenta para identificar topos e fundos intermediários. O Índice de Força com canais ATR não captura todas as curvas, mas aquelas que ele identifica merecem muita atenção.

Nota: a palavra “verdadeiro” em Average True Range refere-se a lidar com diferenças de preços. Como não há lacunas no Índice de Força, aqui o ATR é igual ao Alcance Médio.

Sempre que o Índice de Força sobe acima ou cai abaixo do seu canal 3-ATR, sinaliza que o ticker atingiu uma área de extremo insustentável. É aí que as altas e quedas se esgotam e os preços tendem a reverter. Esta é uma das poucas ferramentas igualmente eficientes na chamada das áreas superior e inferior. Elder-disk coloca uma seta vermelha acima do gráfico quando a EMA do Índice de Força sobe acima do canal 3-ATR. Ele coloca uma seta vermelha abaixo do gráfico quando a EMA cai abaixo do canal 3-ATR.

Na nossa experiência, estes sinais funcionam especialmente bem nos gráficos semanais. Obviamente, os usuários podem experimentá-los a qualquer momento.

Os parâmetros são

Período do Índice de Força (13) – a duração do MA do Índice de Força bruto
Modo Force Index MA (Exponential) – o modo Média Móvel do Índice de Força
Tipo de volume do índice de força (tiques) - o tipo de volume no qual aplicar o índice de força
Período ATR (14) - a duração do ATR bruto
Amplificador ATR (100) - um modificador para amplificar o ATR
Modo MA de Bandas (Exponencial) – o modo MA para todas as bandas.
Comprimento do MA das Bandas (21) - o comprimento do MA das bandas
Fator da 1ª banda (1) - o fator para a 1ª banda (+ e -)
Fator da 2ª banda (1,5) - o fator da 2ª banda (+ e -)
Fator da 3ª banda (2) - o fator da 3ª banda (+ e -)
Código Wingdings do sinal de pico acima (242) – o código Wingdings do símbolo (seta para baixo). Você pode ver a lista de símbolos possíveis na seção de captura de tela.
Cor do sinal de pico acima (vermelho) - a cor do símbolo acima das faixas
Código Wingdings do sinal de pico abaixo (241) – o código Wingdings do símbolo (seta para cima). Você pode ver a lista de símbolos possíveis na seção de captura de tela.
Cor do sinal de pico abaixo (LimeGreen) - a cor do símbolo abaixo das faixas

Dicas de formato: O canal de índice de força possui 7 gráficos – o índice de força, o índice de força suavizado e as bandas superior e inferior em 1, 2 e 3 ATR.

O Índice de Força é desenhado em azul com uma linha grossa. A Força Média é uma linha vermelha sólida. As bandas superior e inferior em 1 ATR são desenhadas em linhas pontilhadas. As bandas superior e inferior em 2 ATR usam linhas tracejadas. As bandas superior e inferior em 3 ATR são linhas cinza sólidas.

", "url": "https://www.mql5.com/pt/market/product/23318", "small_icon": "https://c.mql5.com/31/180/elder-force-index-with-atr-channels-logo-60x60-2425.png", "middle_icon": "https://c.mql5.com/31/445/elder-force-index-with-atr-channels-logo-140x140-9339.png", "icon": "https://c.mql5.com/31/180/elder-force-index-with-atr-channels-logo-200x200-6017.png", "rating": 3, "price": 50, "published": 1496679720, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 23373, "title": "ACB Breakout Arrows MT5", "description": "

O indicador ACB Breakout Arrows fornece um sinal de entrada crucial no mercado ao detectar um padrão especial de rompimento. O indicador escaneia constantemente o gráfico em busca de um momento de consolidação em uma direção e fornece o sinal preciso logo antes do movimento principal.

Obtenha o scanner de múltiplos ativos e múltiplos períodos aqui - Scanner para ACB Breakout Arrows MT5

Principais recursos

Níveis de Stop Loss e Take Profit são fornecidos pelo indicador.
Acompanha um painel Scanner MTF que monitora os sinais de rompimento em todos os períodos.
Adequado para Day Traders, Swing Traders e Scalpers.
Algoritmo otimizado para aumentar a precisão dos sinais.
Nível especial para facilitar movimento de Breakeven ou alvo rápido (Linha de Lucro Rápido).
Métricas de análise de desempenho como ganhos/perdas, taxa de sucesso, lucro médio, etc.
Não repinta.

Confirmação das negociações

- Use o indicador ACB Trade Filter para filtrar negociações de baixa probabilidade.

Compra Forte: Seta para cima + Histograma verde + Tendência de alta.
Venda Forte: Seta para baixo + Histograma vermelho + Tendência de baixa.
Evite operar se o histograma estiver cinza e a tendência for lateral.

(opcional) - Use KT Support and Resistance Levels para evitar entradas próximas a níveis importantes de suporte/resistência. Essas entradas podem rapidamente se tornar negativas e causar perdas desnecessárias.

“O objetivo de um trader de sucesso é fazer as melhores negociações. O dinheiro é secundário.” – Alexander Elder

Parâmetros de entrada

Barras Históricas: Número de barras a serem consideradas para o cálculo do indicador.
Sensibilidade do Sinal: Escolha a sensibilidade da seta (força do sinal).
Barras para SL: Número de barras a serem consideradas para o cálculo do stop loss.
Mostrar Linhas de Alvo: Mostrar/ocultar os níveis de SL, TP e Lucro Rápido no gráfico.
Análise de Desempenho: Mostrar/ocultar os elementos de análise de desempenho, incluindo a linha de tendência de lucro para cada sinal.
Configurações de Alerta: Caixa de alerta, e-mail, notificações push e alertas sonoros disponíveis.

Para desenvolvedores de EAs

// definir arrays\r\n\r\ndouble Buy_Arrow[];\r\ndouble Sell_Arrow[];\r\ndouble Buy_SL[];\r\ndouble Sell_SL[];\r\n\r\n// definir handle do indicador\r\n\r\nint ACB_handle = iCustom(_Symbol,0,\\\"Market/ACB Breakout Arrows\\\");\r\n\r\n// copiar buffers para arrays\r\n\r\nCopyBuffer(ACB_handle,0,1,1,Buy_Arrow);\r\nCopyBuffer(ACB_handle,1,1,1,Sell_Arrow);\r\nCopyBuffer(ACB_handle,2,1,1,Buy_SL);\r\nCopyBuffer(ACB_handle,3,1,1,Sell_SL);\r\n\r\nif(Buy_Arrow[0] != 0) // Condição de entrada de compra\r\nif(Sell_Arrow[0] != 0) // Condição de entrada de venda\r\n\r\nBuy_SL[0]; // Stop Loss de compra\r\nSell_SL[0]; // Stop Loss de venda\r\n\r\n// Obtendo alvos do gráfico\r\n\r\ndouble Quick_Profit = NormalizeDouble(ObjectGetDouble(0, \\\"FirstTarget\\\", OBJPROP_PRICE), _Digits);\r\ndouble First_Target = NormalizeDouble(ObjectGetDouble(0, \\\"Target1\\\", OBJPROP_PRICE), _Digits);\r\ndouble Final_Target = NormalizeDouble(ObjectGetDouble(0, \\\"Target2\\\", OBJPROP_PRICE), _Digits);

", "url": "https://www.mql5.com/pt/market/product/23373", "small_icon": "https://c.mql5.com/31/306/acb-breakout-arrows-mt5-logo-60x60-3827.png", "middle_icon": "https://c.mql5.com/31/445/acb-breakout-arrows-mt5-logo-140x140-8170.png", "icon": "https://c.mql5.com/31/306/acb-breakout-arrows-mt5-logo-200x200-1797.png", "rating": 3.5, "price": 145, "published": 1496655863, "popularity": 26.777247734184872, "category": "Indicator", "votes": 2 }, { "id": 23343, "title": "Turn MT5", "description": "

The indicator shows the market turning points (entry points).
Reversals allow you to track rebound/breakout/testing from the reverse side of the lines of graphical analysis or indicators.
Reversals can be an independent signal.

The indicator allows you to determine reversals taking into account the trend and without it.
You can choose a different period for the movement preceding the reversal, as well as the volatility coefficient.
When plotting reversals, the indicator takes into account volatility.

The indicator is not redrawn.

Settings

History_Size - size of the calculated history.
Extremum - the number of candles for calculating the extremum.
Volatility - period of volatility (if Volatility = 0, then volatility is not taken into account).
Volatility_Multiplier - the coefficient of volatility.
Trend - trend period (if Trend = 0, the trend is not taken into account).
Trend_Type - the method of trend.
Trend_Price - the type of price at which the trend is built.
Type_Arrows_Turn - label style.
Send_Sound - sound alert.
Send_Mail - send an email notification.
Send_Notification - send a mobile notification.
Send_Alert - standard terminal alert.

", "url": "https://www.mql5.com/pt/market/product/23343", "small_icon": "https://c.mql5.com/31/551/turn-mt5-logo-60x60-4326.png", "middle_icon": "https://c.mql5.com/31/551/turn-mt5-logo-140x140-3751.png", "icon": "https://c.mql5.com/31/551/turn-mt5-logo-200x200-5364.png", "rating": 0, "price": 70, "published": 1496311848, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23339, "title": "IDNR4 and 7 28 Pairs Radar MT5", "description": "

This indicator detects IDRN4 and IDNR7 two powerful patterns on 28 pairs on new daily bar.

\r\n

IDNR4 is the acronym for \"Inside Day Narrow Range 4\" where \"Inside Day\" is a lower high and higher low than the previous bar and \"Narrow Range 4\" is a bar with the narrowest range out of the last 4 bars so \"Narrow Range 7\" out of the last 7 bars.

\r\n

Hence, ID/NR4 and better ID/NR7 are an objective criterion for identifying days of decreased range and volatility.

\r\n

Once we find an ID/NR4 or an ID/NR7 pattern, we aim to trade the breakout as volatility resumes.

\r\n

Rules for long

\r\n

An inside bar with the smallest range out of the last 4 or 7 bars.
Place buy stop order above the high of the bar.
Wait for a breakout to trigger order.

\r\n

Rules for short

\r\n

An inside bar with the smallest range out of the last 4 or 7 bars.
Place sell stop order below the low of the bar.
Wait for a breakout to trigger order.

\r\n

Parameters settings

\r\n

Pairs_Suffix: Pairs suffix as \"micro\" or \"-ECN\" etc
Alert_Notification: Alert when IDNR4 or IDNR7 is detected on one or multiple pairs.
Push_Notification: Push notification on mobile device when IDNR4 or IDNR7 is detected on one or multiple pairs.

", "url": "https://www.mql5.com/pt/market/product/23339", "small_icon": "https://c.mql5.com/31/180/idnr4-and-7-28-pairs-radar-mt5-logo-60x60-8365.png", "middle_icon": "https://c.mql5.com/31/446/idnr4-and-7-28-pairs-radar-mt5-logo-140x140-5399.png", "icon": "https://c.mql5.com/31/180/idnr4-and-7-28-pairs-radar-mt5-logo-200x200-4672.png", "rating": 0, "price": 30, "published": 1496247139, "popularity": 0.41584598868594513, "category": "Indicator", "votes": 0 }, { "id": 23199, "title": "FFx 4 Patterns Alerter MT5", "description": "

FFx Patterns Alerter gives trade suggestions with Entry, Target 1, Target 2 and StopLoss .... for any of the selected patterns (PinBar, Engulfing, InsideBar, OutsideBar)

\r\n

Below are the different options available:

\r\n

Multiple instances can be applied on the same chart to monitor different patterns
Entry suggestion - pips to be added over the break for the entry
3 different options to calculate the SL - by pips, by ATR multiplier or at the pattern High/Low
3 different options to calculate the 2 TPs - by pips, by ATR multiplier or at Risk/Reward
Offset the dashboard - any place on the chart
Remove the suggestion once the price reached the SL line
Lines extension away from the current candle
All colors changeable - Background, text, Buy/Sell, entry and TP/SL
Alert when a setup is found - sound / popup / email / push notification

\r\n

Once a suggestion is given, you can confirm it with your own chart analysis. Generally the best setups to be traded are the ones occurring around important support/resistance, round numbers, supply and demand zones, etc.

\r\n

Wish you all the best in your trading. Thank you for your confidence ... FerruFx

\r\n

User Inputs

\r\n

Pattern Mode: select here the pattern to be monitored
PinBar Minimum Size Pips: minimum size of the bar
InsideBar Minimum Size Pips: minimum size of the bar
Entry Break Plus Pips: number of pips away from the pattern where the entry is valid
Use SL Pips: select here to enable the SL pips option
SL Pips: number of pips for the stop loss
Use SL ATR: select here to enable the SL ATR option
SL ATR Multiplier: set here the multiplier to be applied to the ATR value
SL ATR Period: ATR period
Use SL HighLow: select here to enable the SL HighLow option
SL HighLow Plus Pips: number of pips to be added to the high/low value
Use TP Pips: select here to enable the TP pips option
TP 1 Pips: number of pips for the take profit #1
TP 2 Pips: number of pips for the take profit #2
Use TP ATR: select here to enable the TP ATR option
TP 1 ATR Multiplier: set here the multiplier to be applied to the ATR value
TP 2 ATR Multiplier: set here the multiplier to be applied to the ATR value
TP ATR Period: ATR period
Use TP Reward: select here to enable the TP Reward option
TP 1 Reward: set here the reward for the TP against the SL (Risk:Reward)
TP 2 Reward: set here the reward for the TP against the SL (Risk:Reward)
Dashboard X shift: you can set here any number to place the dashboard anywhere on the chart
Dashboard Y shift: you can set here any number to place the dashboard anywhere on the chart
Lines Extension: number of bars ahead of the current bar to extend the lines
Delete Suggestion at SL: select here if you allow the suggestion to be removed if price reach SL level
BUY/SELL Color: select here the color for buy/sell signals
Background Color: select here the color for the panel background
Corners Color: select here the color for the panel corners
Text Color: select here the color for the text
Entry Color: select here the color for the entry line
TP Color: select here the color for the TP lines
SL Color: select here the color for the SL line
Sound Alert: select here to enable the sound alert option
Sound File: set here the sound file for the alert
Popup Alert: select here to enable the popupalert option
Email Alert: select here to enable the emailalert option
Push Alert: select here to enable the push notification option

", "url": "https://www.mql5.com/pt/market/product/23199", "small_icon": "https://c.mql5.com/31/179/ffx-4-patterns-alerter-mt5-logo-60x60-3563.png", "middle_icon": "https://c.mql5.com/31/445/ffx-4-patterns-alerter-mt5-logo-140x140-5106.png", "icon": "https://c.mql5.com/31/179/ffx-4-patterns-alerter-mt5-logo-200x200-1329.png", "rating": 0, "price": 3030, "published": 1496219071, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23200, "title": "OHLC Indicator by PipTick MT5", "description": "

The OHLC indicator shows the current and historical values of High, Low, Open, Close and Mid for a specific time period. It can plot the current values or the values from the previous session. The indicator's range can be calculated from a daily, weekly, monthly, or user-specified session.

Levels

High of the current or previous session.
Low of the current or previous session.
Open of current or previous session.
Close of the current or previous session.
Midpoint of the current or previous session.

Recommendations

Using previous session values of High, Low, Close and Mid is beneficial for support and resistance levels. It tends to work very well.

Main features

The indicator shows the actual levels of High, Low, Open, Close and mid.
Current or previous session values.
Alert notifications for indicator lines.
Custom session time.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting.
Customizable parameters (Colors, Line thickness, Visibility...).
High-speed calculation.
Available for MT4 and MT5.

Please visit the OHLC indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/pt/market/product/23200", "small_icon": "https://c.mql5.com/31/775/ohlc-indicator-by-piptick-mt5-logo-60x60-5388.png", "middle_icon": "https://c.mql5.com/31/775/ohlc-indicator-by-piptick-mt5-logo-140x140-5646.png", "icon": "https://c.mql5.com/31/775/ohlc-indicator-by-piptick-mt5-logo-200x200-7643.png", "rating": 5, "price": 0, "published": 1496153456, "popularity": 1.6202264314413426, "category": "Indicator", "votes": 3 }, { "id": 23263, "title": "Prima MT5", "description": "

Price Reversion Indicator based on MA shows trend reversals. The indicator algorithm provides highly reliable entry points, and its simple settings allow using it for any symbol and trading style. Signals are generated at the opening of a bar and are not redrawn.

\r\n

Prima analyzes the relative movement of two moving averages (fast and slow) with respect to the price, and determines the moments when the next movement will cause the reversal of the two MAs with a high probability. These points are marked by arrows on the chart, and signals are generated.

\r\n

For a better convenience, the indicator additionally displays the two moving averages and their convergence/divergence histogram.

\r\n

Settings

\r\n

General settings - periods of two Medium Average

\r\n

PERIOD1 - first MA's period
PERIOD2 - second MA's period

\r\n

Default periods are 5,34 like in Awesome Oscillator, and Prima generates signals earlier than AO. Use different values for PERIOD1 and PERIOD2. For a better performance, I recommend choosing one period of a significant size (50-200) to represent the trend, and the other one short (7-20) to provide short price fluctuations.

\r\n

Minimal distance between signals helps to filter out the unnecessary signals and to configure money management:

\r\n

D1 - minimal distance between signals in the same direction. Default is 10 points.
D2 - minimal distance between signals in the opposite directions. Default is 30 points.

\r\n

Choose the values of D1,D2 based on the volatility of a selected symbol, the timeframe and the money management system.

\r\n

For ease of use and setup of the indicator, you can choose to show/hide its individual components.

\r\n

SHOW_MA - show/hide moving averages. Lines are shown by default.
SHOW_HGRAM - show/hide the divergence/convergence histogram. Default is to show.
SHOW_STAT - show/hide signal statistics. Default is to hide. If statistics are shown, two values appear near each signal:

Purple to the right - the total amount of movements before the signal.
Green to the left - the movement after the signal. The mode emulates trading operations based on signals and allows you to quickly assess the quality of the selected settings.

\r\n

The indicator can notify the trader about the detected signals:

\r\n

THROW_ALERT - notify by an alert. The default value is true.
SEND_MAIL - notify by an email. The default value is true.
PUSH_NOTIFY - send push notifications. The default value is true.

\r\n

To enable the email and push notifications, you should properly configure the terminal.

\r\n

Usage

\r\n

Direct use of the indicator - follow its signals on a rhythmic market. That is, at a time when sharp fluctuations not expected, and there is enough volatility for trading.

\r\n

In an active market, you should combine the indicator signals with indicators of overbought/oversold areas support/resistance levels.

\r\n

Another good idea is to perform short-term trades (scalping and options) in the direction of the signal.

\r\n

Warning

\r\n

During a low-volatile side movement, the indicator can produce several successive signals against the current movement (searches for a reversal which does not happen). If the indicator generates 4 or more signals in the same direction, you should change the tactics or exit the market.

\r\n

After a significant sudden movement, the first signal against the movement is often not optimal. Rollback signals should be checked using Fibonacci levels.

\r\n

The indicator is not a ready-made trading system, and it should be complemented by other reasonable trading tools.

", "url": "https://www.mql5.com/pt/market/product/23263", "small_icon": "https://c.mql5.com/31/180/prima-mt5-logo-60x60-4808.png", "middle_icon": "https://c.mql5.com/31/446/prima-mt5-logo-140x140-1263.png", "icon": "https://c.mql5.com/31/180/prima-mt5-logo-200x200-9135.png", "rating": 0, "price": 0, "published": 1496052479, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 23177, "title": "AIS Sliding Median and Moving Average MT5", "description": "

The indicator is based on the analysis of interaction of two filters.

\r\n

The first filter is the popular Moving Average. It helps to identify linear price movements and to smooth minor price fluctuations.

\r\n

The second filter is the Sliding Median. It is a non-linear filter. It allows to filter out noise and single spikes in the price movement.

\r\n

A predictive filter implemented in this indicator is based on the difference between these filters.

\r\n

The indicator is trained during operation and is therefore very sensitive to history. If a chart contains few bars, forecast may not be available in some cases. This situation is shown in the first figure. If there are two many bars, there can be a slight delay during indicator start.

\r\n

Filter level - the parameter allows to configure the indicator operation. The value is set between 0 and 255. It allows toy to select the number of bars to be processed by the indicator.

\r\n

Since the number of bars must be strictly odd, their number is calculated by the formula Filter level * 2 + 1.

\r\n

If Filter level = 0, it will be a \"trustful\" averager and repeater of previous values. As this parameter increases, the number of factors taken into account increases, which allows you to track global price movements. A value for this parameter should be selected based on the volatility of the currency pair, the timeframe and your own preferences.

", "url": "https://www.mql5.com/pt/market/product/23177", "small_icon": "https://c.mql5.com/31/179/ais-sliding-median-and-moving-average-mt5-logo-60x60-8929.png", "middle_icon": "https://c.mql5.com/31/447/ais-sliding-median-and-moving-average-mt5-logo-140x140-8863.png", "icon": "https://c.mql5.com/31/179/ais-sliding-median-and-moving-average-mt5-logo-200x200-5474.png", "rating": 0, "price": 30, "published": 1496051590, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 10913 }

Features

Available Oscillators for Divergence Detection

Inputs

Inputs

\r\n\r\nTrading sessions

System messages

The indicator parameters

Settings

Author

Indicator Input Parameters

Features

Inputs

For EA Developers

Features

Inputs

For EA Developers

The indicator is fully flexible directly from the chart

User Inputs

Settings

User Patterns

Offline Charts

Sorting, Scrolling, Opening Charts

Full Description

Indexes of 8 custom currencies

Currencies Pairs

Customization & friendliness

Parameters

Vertical lines

Horizontal lines

Description of some time periods

Some input parameter features

Notes

Important

Purpose

Key features

Main Indicator Parameters and How to Use Them:

Example Settings

Notes

Advantages of the indicator

Recommended symbols

Recommendations on usage

Parameters

Uso ideal

Parâmetros de entrada

Autor

Settings

Advantages of the indicator

Recommended symbols

Recommendations on usage

Parameters

Configurations

Settings

Inputs

Input parameters

Parâmetros de Entrada

Parâmetros de Entrada

Parameters

Inputs Value

Author

Uso ideal

Parâmetros de entrada

Autor

The panel is fully flexible for easy use

User Inputs

Inputs

Settings

Description

Working with the indicator

Settings

The Balance Line Trades (\"The fifth market dimension\")

Fibonacci calculation

Strategies

Features

Inputs

For EA Developers

Features

Inputs

For EA Developers

Indicator signals

Input Variables

\r\n\r\n
Trading sessions

Features
\r\n

Indicadores técnicos para MetaTrader 5

Tipo de indicador

Preços

TSO Total Top Bottom Divergence MT5

Pm 42

MACD candles bars or lines

DG DayInfo

PZ Fibonacci MT5

SmartArrows

TSO Top Bottom Divergence MACD MT5

TSO Top Bottom Divergence Momentum MT5

CME CallPut Option Ratio MT5

FFx Pivot SR Suite Pro MT5

MonsterDash Harmonic Indicator MT5

Currency Index Watcher

Level Alert

Smart Grid MT5

DG TrendSigns

Alpha Trend MT5

PZ Wedges MT5

Splash MT5

Pivot Point MT5 Indicator by PipTick

Fibonacci Retracement MT5 Indicator by PipTick

AIS Simple Linear Smoothing MT5

Infinite Currency Strength Meter All Pairs MT5

Exclusive Bollinger MT5

Predicting Donchian Channel MT5

Break Day Range

Mr Big MT5

ADR ST Patterns Strategy

Fractals ST Patterns Strategy

Gekko Parabolic SAR Plus

Gekko ADX Plus

Gekko RSI Plus

Simple Line for MQL5

PowerSignalMT5

PZ Pennants MT5

FFx Basket Scanner MT5

Heiken Ashi and Heiken Ashi Smoothed MA MT5

Channel FTF MT5

Color Stochastic with an analytical panel

Fifth dimension

TSO Fibonacci Chains MT5

TSO Top Bottom Divergence MT5

TSO Moving Average Slope MT5

Demand And Supply Diagram MT5

Modified TTM Squeeze Indicator MT5

Average True Power MT5

TSO Stochastic RSI MT5

Orders Indicator Base MT5

Fractal Levels MTF for MT5

Pattern DejaVu

StrongCurrency For Mt5

LineSyncMirrorCharts

Double Harmonic Volatility Indicator MT5

Screen Shoter

Indicator Combine Merge MT5 by RunwiseFX

AIS Multi Trend Forecast MT5

Peak Trough Analysis Tool MT5

Trend Sight

Effort and Result MT5 Indicator by PipTick

Smooth Patterns

T Channel

TEMA Trend

PipFinite Cluster Helix MT5

Market Trending plus Alert by RunwiseFX

Trade Direction 5

Elder Force Index With ATR Channels

ACB Breakout Arrows MT5

Turn MT5

IDNR4 and 7 28 Pairs Radar MT5

FFx 4 Patterns Alerter MT5

OHLC Indicator by PipTick MT5

Prima MT5

AIS Sliding Median and Moving Average MT5