{ "from": 25632, "count": 72, "list": [ { "id": 30454, "title": "Doji Engulfing Paths Mt5 Demo", "description": "Doji Engulfing Paths enables to get signals and data about the doji and the engulfing patterns on charts. It makes it possible to get opportunities from trends, and to follow the directional moves to get some profits on the forex and stocks markets.\r\n

It is a good advantage to take all the appearing opportunities with reversal signals and direct signals in order to obtain some profits on the forex market.

\r\n

With the demo version, only the signals starting with the 20th candle or bar are available.

\r\n

System features

\r\n

With fast execution, it allows to register directly the information about the new doji patterns on a chart and starts with the last candle available before the current candle or bar on the chart.

\r\n

The utility shows a sign on the chart in order to indicate where the doji is located on this chart.

\r\n

It enables to get the same functions with the engulfing patterns: it could precisely indicate with a graphical object and sign on the chart the positions of new engulfing patterns.

\r\n

Recommendations

\r\n

First, select the maximal number of previous candles and bars to display on the charts.

\r\n

The maximum is 1000 bar shifts, previously to the current bar. The result will be the display of the exact locations of dojis and engulfing patterns on the technical charts.

\r\n

Special addition

\r\n

The Doji Engulfing Paths is a utility that could run independently to other available and additional EAs and indicators on the selected list of charts.

\r\n

It enables to follow the direction of the trend and select entry levels for reversals of instruments available and the correct period of time with timeframes. When a doji appears on an uptrend for example, it is the right period of time to go for a reversal and open a short position on the instrument.

\r\n

According to the directions, when an engulfing pattern occurs on an uptrend and with the same direction, it is possible to continue the directional move and to go to open a long position on this trend move.

\r\n

That is supposed to enable profits on the forex market.

\r\n

Inputs

\r\n

num_Of_Shifts: number of bars to display
color_Doji_PL: color of the signal for uptrends and downtrends with dojis
- clr_Green_H
- clr_Aqua_H
- clr_Orange_H
- clr_Beige_H
- clr_Violet_H
\r\n
color_Engulfing_Up: color of the signals for uptrends with engulfings
- clr_Green_H
- clr_Aqua_H
- clr_Orange_H
- clr_Beige_H
- clr_Violet_H
\r\n
color_Engulfing_Down: color of the signals for downtrends with engulfings
- clr_Red_LH
- clr_Yellow_LH
- clr_LightViolet_LH
- clr_Magenta_LH
- clr_LightYellow_LH
\r\n
Signals: list of signals to display, only dojis, only engulfing, or both of the systems
- mode_Doji_H: only dojis
- mode_Engulfing_Up: only engulfing on up directions
- mode_Engulfing_Down: only engulfing on down directions
\r\n

", "url": "https://www.mql5.com/pt/market/product/30454", "small_icon": "https://c.mql5.com/31/255/doji-engulfing-paths-mt5-demo-logo-60x60-9559.png", "middle_icon": "https://c.mql5.com/31/439/doji-engulfing-paths-mt5-demo-logo-140x140-3386.png", "icon": "https://c.mql5.com/31/255/doji-engulfing-paths-mt5-demo-logo-200x200-6665.png", "rating": 0, "price": 0, "published": 1532962897, "popularity": 0.2267660496504297, "category": "Indicator", "votes": 0 }, { "id": 30733, "title": "Lib5 EAPadPRO for MT5", "description": "

Biblioteca para adicionar o Painel de Informações ao seu Consultor Especialista para MetaTrader 5.

Não podemos garantir que as informações e a interface do programa lhe darão lucro nas negociações, mas certamente diremos que mesmo a interface mais simples do programa pode fortalecer a primeira impressão.

A descrição detalhada e as instruções para adicionar nosso painel ao seu Expert Advisor estão em nosso blog: LIB - EAPADPRO Instruções passo a passo

Descrição detalhada de nosso painel e instruções para usar EAPADPRO

Versão da biblioteca MetaTrader 4

O processo de adição consiste em 10 etapas e elas são descritas em detalhes em nosso artigo.

Instalando a Biblioteca

Instale a biblioteca deste site;
Abra seu Expert Advisor;
Abra nosso exemplo e guia passo a passo para instalar nosso código, o arquivo Exp - EAPADPRO BIBLIOTECA TEST (pode ser encontrado no blog) ;
Faça cada etapa conforme escrito na recomendação ou use nossas instruções passo a passo do site.

Personalização EAPADPRO

Tudo o que você pode alterar em nosso painel está descrito neste parágrafo:

versionea - A versão de seu Expert Advisor que é exibida no painel;
BMPLOGO - o logotipo do seu consultor BMP 60x60 que é exibido no painel;
ícone - O ícone do seu especialista, que é exibido nas propriedades do especialista;
defEANAME - o nome do seu Expert Advisor que é exibido no painel;
YourName - seu nome ou apelido que é exibido no painel;
copyright - Seu copyright, que é exibido nas propriedades do Expert Advisor;
CreateInputs - A função de exibir suas variáveis externas no painel. Existem 10 desses parâmetros no total. O formato do preenchimento: \"Nome\", \"Valor\";
CreateStrategy - A função de exibir seus valores de estratégia no painel. Existem 10 desses parâmetros no total. O formato do preenchimento: \"Nome\", \"Valor\";
MagicForEaPadPRO = 0 - Número mágico, que será observado por nosso painel (todas as informações são filtradas por número mágico), em -1 = o painel pegará todas as posições da conta por este símbolo, em 0 = apenas negócios manuais (mão) ;
MagicForEaPadPRO_Open = -1 - Número mágico, que será atribuído às posições abertas em nosso painel;
CommentForEaPadPRO = \"\" - Um comentário que será atribuído às posições abertas do nosso painel;
TypeFillingForEaPadPRO = 0 - Tipo de atendimento de pedidos na abertura, somente para terminal MT5;
ShowBuySell = true - Mostrar o \"painel de negociação em 1 clique\" (COMPRAR VENDER)

Termos de uso

Nossa biblioteca com o painel de informações EAPADPRO é distribuída no link de volta para nossa página.

Se você deseja vender seu especialista no mercado ou na Internet, você precisa adicionar o seguinte texto à descrição do seu produto:

O painel gráfico de informações EAPADPRO.
Todos os direitos deste painel EAPADPRO pertencem a Vladislav Expforex
O autor do painel de informações EAPADPRO não é responsável pelo orientador ou indicador que usa nosso painel.
Nosso painel EAPADPRO é projetado exclusivamente para fornecer informações adicionais sobre como negociar em sua conta.

", "url": "https://www.mql5.com/pt/market/product/30733", "small_icon": "https://c.mql5.com/31/1730/lib5-eapadpro-for-mt5-logo-60x60-7438.png", "middle_icon": "https://c.mql5.com/31/1730/lib5-eapadpro-for-mt5-logo-140x140-5505.png", "icon": "https://c.mql5.com/31/1730/lib5-eapadpro-for-mt5-logo-200x200-5781.png", "rating": 4.5, "price": 0, "published": 1532953303, "popularity": 11.631860160877382, "category": "Library", "votes": 6 }, { "id": 30597, "title": "Open Interest for tester MT5", "url": "https://www.mql5.com/pt/market/product/30597", "small_icon": "https://c.mql5.com/31/257/open-interest-for-tester-mt5-logo-60x60-9851.png", "middle_icon": "https://c.mql5.com/31/439/open-interest-for-tester-mt5-logo-140x140-7618.png", "icon": "https://c.mql5.com/31/257/open-interest-for-tester-mt5-logo-200x200-3189.png", "rating": 0, "price": 30, "published": 1532698811, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 28749, "title": "EA Sato MT5", "description": "

Sato - smart automatic trading robot, which makes trend transactions using up to 15 trend indicators. The robot is \r\ndeveloped on the basis of a real trading strategy.

\r\n

Very easy to configure, does not require special knowledge. You can quickly start trading using the default settings. The robot is optimized \r\nfor 26 currency pairs and does not need optimization.

\r\n

Stop-loss and take-profit are established for each order, and also various methods of order modifications are used.

\r\n

Monitoring: https://www.mql5.com/ru/signals/author/profi_mql

\r\n

МetaТrader 4 version: https://www.mql5.com/en/market/product/30744

\r\n\r\n\r\n

\r\n

Attention! This EA is only for \"hedging\" accounts.

\r\n

\r\n\r\n\r\n

\r\n

Does not use scalping, averaging, martingale, grid and other risky strategies.

\r\n

\r\n\r\n\r\n

\r\n

\r\n\r\n\r\n

Multi_Currency_BackTest - if set to true, a multi-currency tester is used. If false, \r\n the current currency and timeframe are used.

\r\n

For quick test, use:

\r\n\r\n\r\n

Tick simulation methods:

M1 OHLC (simulation of 1-minute bars, OHLC prices) or Open price only (quick method on \r\n complete bars).

\r\n

\r\n\r\n\r\n

Pairs and Timeframe

\r\n\r\n\r\n

EURUSD
GBPUSD
GBPJPY
USDCHF
USDJPY
AUDUSD
GBPAUD
USDCAD
GBPCAD
EURAUD
EURCAD
EURGBP
EURJPY
GBPCHF
NZDUSD
GBPNZD
EURCHF
AUDCAD
NZDCAD
NZDCHF
NZDJPY
CHFJPY
CADJPY
CADCHF
AUDNZD
EURNZD

\r\n

\r\n\r\n\r\n

Requirements and Recommendations

\r\n\r\n\r\n

It is recommended to install the EA on one chart, you can enable and disable currencies in the settings.
The minimum recommended balance for the EA's use with the recommended pairs - $300 or $3 on a cent account.
5-digit brokers.
VPS.

\r\n

\r\n\r\n\r\n

Parameters

\r\n\r\n\r\n

EURUSD - if true, use EURUSD;
...
EURNZD - if true, use EURNZD;
Symbols_Prefix(Suffix)_Name - enter the prefix (suffix) ONLY if the name of the symbols uses a suffix (for example: \r\n \"m.\"(\".m\") if the symbol name is \"m.EURUSD\"(\"EURUSD.m\"));
Use_Risk_StopLoss - The risk-based stop loss.

Custom_balance - FreeMargin = false or Balance = true.
Percentage Risk — interest risk based on stop loss.

Fixed_Lot - fixed lot ( if Use_Risk_StopLoss - false);
Order Type - trading direction;
Magic - trades ID.
Order Comment — order comment.
Slippage - allowed slippage before an order is triggered;
Show_Info_Panel - use the information panel (false - faster backtest);
Show_additional_panel - use the info panel for profit indicator per each month, for backtest only;
Multi_Currency_BackTest:

true - use the multi-currency tester;
false - use the current currency and timeframe;

Adaptation of the spread to the stop loss - adapt the stop loss to spread;
Max Spread EURUSD - maximum allowed spread EURUSD;
...
Max Spread EURNZD - maximum allowed spread EURNZD;
Stop trade - disable trading for a certain time (from 5 minutes to 24 hours) if the average spread exceeded \r\n Max_Spread;

\r\n

Trading within the week:

\r\n\r\n\r\n

Monday - trade on Monday;
...
Friday - trade on Friday.

\r\n

Time trading within a day:

\r\n\r\n\r\n

Use time - if true, the EA trades by time;
GMT_mode - GMT settings; (0 - disabled);
Every_Day_Start - operation start time (hh:mm);
Every_Day_End - operation end time (hh:mm).

Time to disable on Friday:
\r\n\r\n\r\n

Use time - if true, the EA trades by time;
Disable_in_Friday - operation end time on Friday (hh:mm).

\r\n

", "url": "https://www.mql5.com/pt/market/product/28749", "small_icon": "https://c.mql5.com/31/258/ea-sato-mt5-logo-60x60-2876.png", "middle_icon": "https://c.mql5.com/31/439/ea-sato-mt5-logo-140x140-7503.png", "icon": "https://c.mql5.com/31/258/ea-sato-mt5-logo-200x200-1636.png", "rating": 1.5, "price": 70, "published": 1532688267, "popularity": 0, "category": "Expert", "votes": 2 }, { "id": 30617, "title": "Theobaldo Mini indice", "description": "

O Robô Theobaldo foi construído para atuar com o indicador Bill Williams -> Fractals

\r\n

Significado de Theobaldo: O inocente lavrador

\r\n

Indicado para utilização no Mini índice e Mini dólar, entretanto pode ser usado em qualquer ativo.

\r\n

Foi desenvolvido para atuar no mercado para daytrade, com o encerramento das posições no horário desejado. Entretanto, caso o usuário deseja utilizar para swing trade, é necessário deixar o parâmetro TimeFilter como 0;

\r\n

As negociações são realizadas quando o indicador der o sinal e os parâmetros de tempo de sinal e meuSpred forem atendidos.

\r\n

A operação é encerrada quando se atinge o profit desejado ou quando o preço atinge o stop loss que foi programado. Outras formas de se encerrar a operação é alcançando o profit desejado no dia, término do horário estipulado para a operação do robô ou se o sinal de reversão estiver escolhido.

\r\n

Resultados

\r\n

As imagens foram obtidas através do uso de backtest com o parâmetro de execução \"every tick\", todos os tempos gráficos geram entradas, entretanto é preciso ter ciência que quanto menor o tempo mais entradas serão geradas.

\r\n

É preciso escolher corretamente o lote de acordo com o ativo que utilizará. Nos casos em que foram realizados a maior parte dos testes foram os índices brasileiros, WIN$ e WDO$ (séries continuas).

\r\n

Parâmetros do EA

\r\n

ReverseSignals: Informa ao Expert Advisor se obtiver um sinal contrário fechar a posição e iniciar no sentido contrário;
TradeDelay: Quantos candles esperar para executar a operação após o sinal;
SignalValidTime: Quantos candles o sinal é válido;
LotSize: Número de lotes (deve ser proporcional ao ativo operado)
TakeProfit: Quantos pontos para obter o lucro (em pips)
StopLoss: Quantos pontos para perda no trade (em pips)
UseFractalSL: Usar fractais para ativar stoploss?
UseCandleSL: Usar Candle para ativar stoploss?
TrailingStop: Quantos pontos para iniciar o trailling (em pips)
TimeFilter: Deseja usar janela de tempo? (Recomendado para daytrade)
TimerStart: Hora que deseja iniciar as operações (formato HH:MM)
TimerEnd: Hora que deseja encerrar as operações (formato HH:MM) (Se houver posições em aberto, essas serão encerradas)
MagicNumber: Autoexplicativo
Slippage: Autoexplicativo
ProfitDay: Valor para encerrar as negociações no dia
UseFractal: Usar Fractal junto com a as regras do Theobaldo
DistanceCandle: Parâmetro A do fractal
buyOut: Parâmetro B do fractal
mySpread: Risco na entrada com o fractal (Distância em pips o sinal até o negócio)

\r\n

Autor

\r\n

Desenvolvedor de sistemas de informação desde 1996, participante da comunidade MQL desde 2014.

\r\n

Dúvidas, me mandem uma mensagem.

", "url": "https://www.mql5.com/pt/market/product/30617", "small_icon": "https://c.mql5.com/31/257/liberty-mini-indice-logo-60x60-5685.png", "middle_icon": "https://c.mql5.com/31/445/theobaldo-mini-indice-logo-140x140-4164.png", "icon": "https://c.mql5.com/31/257/liberty-mini-indice-logo-200x200-1585.png", "rating": 5, "price": 450, "published": 1532612547, "popularity": 1.3883898728381219, "category": "Expert", "votes": 1 }, { "id": 30737, "title": "NR7 and NR7IB", "description": "

This indicator shows the narrowest bar within the past seven bars, which is known as NR7 in the literature.

\r\n

It will also show the NR4 bar.

\r\n

The range is variable; thus, you can show any two ranges, e.g. NR7/NR4, NR11/NR6, etc. For the description of this indicator, I will continue to use the default of seven (7) and four (4).

\r\n

If an NR7 bar also happens to be an Inside Bar, it gives a stronger signal. Thus NR7IB are denoted in another color. Sometimes this is known as NR7ID (for Inside Day). I kept the description generic because you can use this indicator on any time frame.

\r\n\r\n

As a bonus, I have added the ability to show the:

\r\n

Highest bar (HI7)
Lowest bar (LO7)
Widest bar (WI7)

\r\n

within the range N.

\r\n

By changing the range size N you can show other values, e.g. HI3, LO3, WI3.

\r\n

This indicator shows on the main chart window, not a sub-window.

\r\n

Disclaimers

\r\n

Mac & Linux

\r\n

Do not download this product if you have a Mac.

\r\n

Wine doesn’t support the Market tab. Do not download this product if you do not have a Markets tab in MT5.

\r\n

Calculations

\r\n

Basically, it’s a lookback loop that goes through the past N bars to determine which bar is the narrowest.

\r\n

Features

\r\n

Works on all chart periods.
Can show Highest (HI7), Lowest (LO7), Widest (WI7) bars.
Can use any valid integer lookback range.
Will show values in Data Window

\r\n

Indicator’s Parameters

\r\n

Longer range width (lookback) in bars – This is the 7 of NR7. You can change the range to any logical integer value.
Shorter range width (lookback) in bars – This is the 4 of NR4. You can change the range to any logical integer value.
Symbol char code – This is the integer character code from the Wingdings characters. See the MQL5 “Object Constants” for specifics.
Show highest/lowest of range – Boolean that shows/hides the Highest (HI7) and Lowest (LO7) bars.
Show widest of range – Boolean that shows/hides the Widest (WI7) bars.

", "url": "https://www.mql5.com/pt/market/product/30737", "small_icon": "https://c.mql5.com/31/271/nr7-and-nr7ib-logo-60x60-5499.png", "middle_icon": "https://c.mql5.com/31/441/nr7-and-nr7ib-logo-140x140-1345.png", "icon": "https://c.mql5.com/31/271/nr7-and-nr7ib-logo-200x200-2230.png", "rating": 3, "price": 30, "published": 1532612159, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30682, "title": "OrderBook Cumulative Indicator", "description": "

Order Book, known also as Market Book, market depth, Level 2, - is a dynamically updated table with current volumes of orders to buy and to sell specific financial instument at price levels near Bid and Ask.

\r\n

MetaTrader 5 provides the means for receiving market book from your broker, but in real time only, without access to its history. The indicator OrderBook Cumulative Indicator accumulates market book data online and visualizes them on the chart. In addition, the indicator can show the market book on the history, by reading archive data, created by OrderBook Recorder. The indicator is based on the library OrderBook History Library, which can be embedded into your expert or indicator.

\r\n

The archive files can be stored in the data folder of the terminal (usually, it looks like C:\\Program Files\\MetaTrader 5 MetaQuotes\\MQL5\\Files), or in the common data folder for all terminals (for example, 'C:\\Users\\<UserName>\\AppData\\Roaming\\MetaQuotes\\Terminal\\Common\\Files'). In either case, inside the folder another subfolder is used as a root for all market books, and the name of the subfolder is specified in the input parameter OrderBook_FileFolder, by default - \"Books\". Inside the root subfolder another level of subfolders is created - each subfolder corresponds to a specific work symbol, and every single day data is saved in a file YYYYMMDD.hob, where YYYY, MM, DD are year, month, day correspondingly. The extension \"hob\" stands for History of Order Book. For example, the ticker GAZP will produce the files MQL5/Files/Books/GAZP/*.hob.

\r\n

Parameters

\r\n

ShowHistory - an option to enable market book view on the history, based on the archive; by default, false - disabled, that is the indicator collects and displays online data;
ShowHistoryFrom - a date to start searching the archives from while showing market books on the history (when ShowHistory is enabled);
CharCode - a character code to display indicator's marks; it can be any symbol from the Wingdings font or -1; by default -1, which means that numeric bullets with values from 1 to 10 are displayed, denoting relative volume size;
AveragingPeriod - a period for averaging values from the market book using exponential moving average, continuously; by default - 0, which means that accumulation and averaging of the data is performed separately for every bar; when a bar is completed, previous statistics are discarded, and volumes are averaged from scratch;
OrderBook_FileFolder - a name of the root folder, where subfolders and files of the market books are stored; by default - \"Books\"; every subfolder is named according to specific work symbol;
OrderBook_UseCommonFiles - an option for reading files from the data folder of the current terminal (false, by default) or from the common data folder for all terminals (true); use the common folder for tests in the local tester;
OrderBook_TimeZoneCorrection - a correction of date and time, which is required in case, that archives are read in a terminal with a timezone, which differs from a timezone of the terminal where the archives were created; specified in seconds; for example, if the market book was saved with the server time in GMT+3, and then it's applied on quotes from a server, where time is in GMT+2, the correction should be 1 hour (-3600 seconds), because times in GMT+2 go 1 hour late in comparison to (i.e. they are 1 hour smaller than) GMT+3; 15:00 in GMT+3 is 14:00 in GMT+2;

", "url": "https://www.mql5.com/pt/market/product/30682", "small_icon": "https://c.mql5.com/31/260/orderbook-cumulative-indicator-logo-60x60-9385.png", "middle_icon": "https://c.mql5.com/31/438/orderbook-cumulative-indicator-logo-140x140-8239.png", "icon": "https://c.mql5.com/31/260/orderbook-cumulative-indicator-logo-200x200-5915.png", "rating": 5, "price": 49, "published": 1532536790, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30680, "title": "OrderBook History Playback", "description": "

\r\n

MetaTrader 5 provides the means for receiving market book from your broker, but in real time only, without access to its history. This expert adviser OrderBook History Playback allows you to playback the market book events on the history using files, created by OrderBook Recorder. The expert is based on the library OrderBook History Library, which can be as well embedded into your expert adviser or indicator (source codes are required). The library sends appropriate OnBookEvent events to your program in the tester, which make it possible to test trading strategies based on volumes analysis in the market book.

\r\n

This is a non-trading expert, it does only show a comment with available information of the market book live or on the history. On every single record the following information is displayed: index, requested trade types (S for sells, B for buys), price level, volume.

\r\n

Parameters

\r\n

ShowCursor - an option to enable one of the 2 modes: false (by default) - monitors the market book online; true - creates a vertical line as a cursor, which can be dragged to highlight a bar in the past; if the market book data is available for this bar, it's displayed in the comment; only one book is shown per bar, but normally many events are available for a single bar in the file (up to one event per tick), so custom source code can analyze much more data;
TimerPeriod - period of the timer, in seconds, by default - 0, which means no timer, and the library is executed by ticks; the timer is useful on weekends, and on slow market;
OrderBook_FileFolder - a name of the root folder, where subfolders and files of the market books are stored; by default - \"Books\"; every subfolder is named according to specific work symbol;
OrderBook_UseCommonFiles - an option for reading files from the data folder of the current terminal (false, by default) or from the common data folder for all terminals (true); use the common folder for testing this and other expert advisers in the local tester; otherwise, all the hob-files should be linked to the source code using the directive #property tester_file;
OrderBook_TimeZoneCorrection - a correction of date and time, which is required in case, that archives are read in a terminal with a timezone, which differs from a timezone of the terminal where the archives were created; specified in seconds; for example, if the market book was saved with the server time in GMT+3, and then it's applied on quotes from a server, where time is in GMT+2, the correction should be 1 hour (-3600 seconds), because times in GMT+2 go 1 hour late in comparison to (i.e. they are 1 hour smaller than) GMT+3; 15:00 in GMT+3 is 14:00 in GMT+2;

", "url": "https://www.mql5.com/pt/market/product/30680", "small_icon": "https://c.mql5.com/31/258/orderbook-history-playback-logo-60x60-1779.png", "middle_icon": "https://c.mql5.com/31/446/orderbook-history-playback-logo-140x140-3905.png", "icon": "https://c.mql5.com/31/258/orderbook-history-playback-logo-200x200-6415.png", "rating": 0, "price": 0, "published": 1532536576, "popularity": 0.14720741504255308, "category": "Utility", "votes": 0 }, { "id": 30679, "title": "OrderBook Recorder", "description": "

\r\n

MetaTrader 5 provides the means for receiving market book from your broker in real time. The expert OrderBook Recorder records market book changes and stores them in local files for further usage in indicators and expert adviser, including testing in the tester.

\r\n

The expert stores market book of the work symbol of the chart, where it's attached.

\r\n

The files are created in the folder MQL5/Files/Books, where \"Books\" - is an adjustable name, given through a special input parameter (see below). Inside the folder another folder is created for every specific work symbol, which contains every day records in dedicated file YYYYMMDD.hob, where YYYY, MM, DD - year, month, day correspondingly. The extension \"hob\" stands for History of Order Book. For example, the ticker GAZP will produce the files MQL5/Files/Books/GAZP/*.hob.

\r\n

The data from the files should be read by the library OrderBook History Library. In particular, this library is used for reading market books in the indicator OrderBook Cumulative Indicator and demo expert adviser OrderBook History Playback. The library is intended to embedding into your MQL programs (source codes of the programs are required).

\r\n

The expert adviser shows a comment like that:

\r\n

YYYY.MM.DD HH:SS N [X]

\r\n

YYYY.MM.DD HH:SS - date and time of the latest processed event;

\r\n

N - total number of events written by the expert into current file since its start;

\r\n

X - the size of the market book in the latest event;

\r\n

Parameters

\r\n

FileFolder - a string with the root folder name, where to place all files with market books for all symbols (in a separate subfolder for every symbol), by default - \"Books\";

\r\n\r\n

\r\n

Attention! Current server time is stored in the files \"as is\", preserving offset to GMT. Reading file archives for the same account or other accounts on the same server requires no further processing. However, if the archive is transferred to a terminal, connected to a server with different time zone (offset to GMT), one should properly adjust the parameter OrderBook_TimeZoneCorrection in the library OrderBook History Library. Please note, that the tester does always emulate a server with the timezone GMT+0, regardless of actual timezone of the quotes!

", "url": "https://www.mql5.com/pt/market/product/30679", "small_icon": "https://c.mql5.com/31/258/orderbook-recorder-logo-60x60-2596.png", "middle_icon": "https://c.mql5.com/31/445/orderbook-recorder-logo-140x140-6854.png", "icon": "https://c.mql5.com/31/258/orderbook-recorder-logo-200x200-6582.png", "rating": 0, "price": 0, "published": 1532536147, "popularity": 0.14969410526726168, "category": "Utility", "votes": 0 }, { "id": 30681, "title": "OrderBook History Library", "description": "

MetaTrader 5 provides the means for receiving market book from your broker, but in real time only, without access to its history. The library OrderBook History Library reads market book state in the past from archive files, created by OrderBook Recorder. The library can be embedded into your indicators and expert advisers (source codes are required), and then they can be tested with the market book data in the tester.

In particular, the library is used in the indicator OrderBook Cumulative Indicator and demo expert adviser OrderBook History Playback.

Here is an example of the header file for including the library into your MQL program:

input string OrderBook_FileFolder = \"Books\";\r\ninput bool OrderBook_UseCommonFiles = false;\r\ninput int OrderBook_TimeZoneCorrection = 0;\r\n\r\ntypedef void (*pOnBookEvent)(const string &symbol);\r\n\r\n#import \"OrderBook History Library.ex5\"\r\nvoid OrderBook_Init(pOnBookEvent ptr, const string folder, const bool common, const int offset);\r\nbool OrderBook_MarketBookAdd(string symbol);\r\nbool OrderBook_MarketBookRelease(string symbol);\r\nbool OrderBook_MarketBookGet(string symbol, MqlBookInfo &bookArray[]);\r\nlong OrderBook_MarketBookPeek(string symbol, MqlBookInfo &bookArray[]);\r\nvoid OrderBook_OnTick();\r\nvoid OrderBook_OnTimer();\r\nbool OrderBook_CheckForEvents(datetime current);\r\n#import\r\n\r\n#ifdef ORDERBOOK_SUBSTITUTE\r\n#define MarketBookAdd OrderBook_MarketBookAdd\r\n#define MarketBookRelease OrderBook_MarketBookRelease\r\n#define MarketBookGet OrderBook_MarketBookGet\r\n#endif

The input parameters are defined for convenience - they should be passed into the function OrderBook_Init.

OrderBook_FileFolder - a name of the root folder, where subfolders and files of the market books are stored; by default - \"Books\"; every subfolder is named according to specific work symbol; for example, the ticker GAZP will form the files MQL5/Files/Books/GAZP/*.hob;
OrderBook_UseCommonFiles - an option for reading files from the data folder of the current terminal (false, by default) or from the common data folder for all terminals (true);
OrderBook_TimeZoneCorrection - a correction of date and time, which is required in case, that archives are read in a terminal with a timezone, which differs from a timezone of the terminal where the archives were created; specified in seconds; for example, if the market book was saved with the server time in GMT+3, and then it's applied on quotes from a server, where time is in GMT+2, the correction should be 1 hour (-3600 seconds), because times in GMT+2 go 1 hour late in comparison to (i.e. they are 1 hour smaller than) GMT+3; 15:00 in GMT+3 is 14:00 in GMT+2;

Functions

OrderBook_Init - initialization of the library, should be called from OnInit; the first parameter should be the event handler OnBookEvent;
OrderBook_MarketBookAdd, OrderBook_MarketBookRelease, OrderBook_MarketBookGet - analogous functions to corresponding standard MQL functions; while working online, the standard functions are called internally - this way, emdedding the library will not alter the source code logic; while working in the tester, the library retrieves data from the files; the subscription for market book for current chart's symbol only is allowed;
OrderBook_MarketBookPeek - similar to OrderBook_MarketBookGet, but always reading data from files - both in the tester and online; MarketBookGet is never called;
OrderBook_OnTick - optional execution of the library for latest tick from OnTick; only for the tester, online does nothing;
OrderBook_OnTimer - optional execution of the library for latest known time from OnTimer; only for the tester, online does nothing;
OrderBook_CheckForEvents - optional execution of the library from the tester and online, ad hoc - for specified date and time;

Adding the line #define ORDERBOOK_SUBSTITUTE into the source code before including the header file will implicitly replace all calls of the standard market book function with corresponding library's functions.

Due to a well-known bug of MQL5 Market, all libraries are downloaded into MQL5/Scripts/Market folder, not into MQL5/Libraries, where they should be. Please copy the library's ex5-file manually into MQL5/Libraries folder in order for imports to work properly.

", "url": "https://www.mql5.com/pt/market/product/30681", "small_icon": "https://c.mql5.com/31/258/orderbook-history-library-logo-60x60-2054.png", "middle_icon": "https://c.mql5.com/31/445/orderbook-history-library-logo-140x140-5220.png", "icon": "https://c.mql5.com/31/258/orderbook-history-library-logo-200x200-6580.png", "rating": 3, "price": 69, "published": 1532535871, "popularity": 0, "category": "Library", "votes": 2 }, { "id": 30621, "title": "Excessive Momentum Indicator MT5", "description": "

Introduction

Excessive Momentum Indicator is the momentum indicator to measure the excessive momentum directly from raw price series. Hence, this is an extended price action and pattern trading. Excessive Momentum Indicator was originally developed by Young Ho Seo. This indicator demonstrates the concept of Equilibrium Fractal Wave and Practical Application at the same time. Excessive Momentum detects the market anomaly. Excessive momentum will give us a lot of clue about potential reversal and breakout opportunity. The great advantage of Excessive momentum is that it is simple and easy to use. It can go well with most of known techncial analysis including trend indicators, oscillators, Fibonacci trading, harmonic pattern trading, volume spread analysis, Elliott Wave pattern, etc.

Input Settings

A. Indicator settings

Bars To Scan: amount of candle bars to calculate the indicator
Momentum Strength Factor: Momentum Strength is the strength of Excessive Momentum to detect. It stays between 0.1 and 0.5. In theory it can go up to 1.0. But you will not get many signals to trade. The default setting is 0.1. You can try various Momenum Strength Factor to optimize your trading performance if you wish.
Equilibrium Fractal Wave Scale: This input controls the size of Fractal Wave when we detect the excessive momentum. If you put bigger number, then you get less signals to trade. The default setting is 0.5.

B. Graphic settings

Use White Chart: to use white chart, set to true, otherwise, just set to false
Excessive Momentum High Color: Excessive Momentum line color when peak (high) is detected
Excessive Momentum Low Color: Excessive Momentum line color when trough (low) is detected
Auto Fibo Color: Color of Automatic Fibnacci Retracment in your chart

How to use

In the indicator, we provide the automatic Fibonacci retracement to gauge the potential reversal opportunity. Hence, you can readily combine the classic Fibonacci trading setup with our Excessive momentum indicator. Do remember that excessive momentum line is the important support and resistance for your trading. Even though you have measured the Fibonacci ratio correctly for the potential reversal opportunity, the price must cross the excessive momentum line for confirmation. Sometimes, price can bounce off from the excessive momentum line. In this case, we get another reversal trading opportunity from excessive momentum line. Just treat the excessive momentum line as sensible support and resistance for your trading.

Some additional tools to help your trading

With excessive momentum indicator, oscillators like RSI and CCI can be used as secondary confirmation tools. This is the basic requirement for your trading.

With Harmonic Pattern and Elliott Wave pattern

If you want to use Excessive momentum indicator together with Harmonic pattern or Elliott Wave pattern, just replace the Fibonacci retracement with your harmonic pattern or Elliott wave pattern measurement (you will need to use external software for this). Alternatively, you can use Fibonacci retracement together with Harmonic pattern and Elliott wave pattern if you wish.

Trading Strategy Guide

If you want to use Excessive momentum indicator, we also provide the volume spread anlaysis tool kit to assit further with your momentum trading. The volume spread analysis tool kit is available for both free and paid version. You can find the details about them from the link below:

Strategy Guide 1: https://www.mql5.com/en/blogs/post/750346

Strategy Guide 2: https://www.mql5.com/en/blogs/post/750390

Important Note

This is the off the shelf product. Therefore, we do not accept any modification or customization request on this product. In addition, we do not provide any code library or any support for your coding for this product.

", "url": "https://www.mql5.com/pt/market/product/30621", "small_icon": "https://c.mql5.com/31/262/excessive-momentum-indicator-mt5-logo-60x60-1673.png", "middle_icon": "https://c.mql5.com/31/441/excessive-momentum-indicator-mt5-logo-140x140-7404.png", "icon": "https://c.mql5.com/31/262/excessive-momentum-indicator-mt5-logo-200x200-9540.png", "rating": 5, "price": 200, "published": 1532448693, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 30150, "title": "Renko Charting for MT5", "description": "

Renko indicator helps develop Renko charts on different symbols.

\r\n

Advantages

\r\n

Drag and drop the indicator on M1 timeframe of the symbol chart
Realtime updates
Indicator can be used for Expert Advisors and technical analysis
Backtest your strategy using Renko indicator

\r\n

Parameters

\r\n

BOX SIZE: Input the number of box size. The box size reflects the difference of the symbol price. So, a 50 box size would reflect a 5 pip value difference in a currency pair symbol
Show Wicks: If true, high or low of the bricks will also be shown.

\r\n

How to use

\r\n

Attach the indicator to a chart (timeframe M1) to create the Renko chart
Input box size to select the difference you want to use
Use Renko chart on M1 timeframe only.
Please go through the screenshots to understand the steps

\r\n

Details on benefits of renko charting, indicators and EAs are provided in the Comments section.

", "url": "https://www.mql5.com/pt/market/product/30150", "small_icon": "https://c.mql5.com/31/253/renko-charting-for-mt5-logo-60x60-4011.png", "middle_icon": "https://c.mql5.com/31/439/renko-charting-for-mt5-logo-140x140-2296.png", "icon": "https://c.mql5.com/31/253/renko-charting-for-mt5-logo-200x200-2792.png", "rating": 3.6666667461395264, "price": 30, "published": 1532448368, "popularity": 0, "category": "Utility", "votes": 3 }, { "id": 30524, "title": "RSI talking to save your eyes", "description": "

RSI talking, use all your senses while trading!

\r\n

The idea

\r\n

When trading your eyes might be very stressed. Therefore I programmed the RSItalking. Trade what you see and what you hear!

\r\n

Function

\r\n

This indicator says \"rsioverbought\" when rsi is over a threshold value (default 75%) and \"rsioversold\" if it is under a lower threshold (default 25%).

\r\n

When you keep a long position be adviced to realize profit when the indicator tells you \"rsioverbought\" and vice versa.

\r\n

You will find an explanation of the functionality of RSI in youtube.

\r\n

Parameters

\r\n

Period of RSI: Period of RSI, default 14
Upper threshold value: If RSI > threshold the indicator says \"rsi overbought\" (default 75)
Lower threshold value: if RSI < threshold the indicator says \"rsi oversold\" (default 25)

\r\n

Issues and disclaimer

\r\n

No issues were found up to now. If the treshold values are not marked in the window of the indicator it might be, that some old objects named \"trUp\" and \"trDown\" remained and have to be deleted by hand.

\r\n

If you cannot create your own wav sondfiles you can contact me over the mql5 messenger.

\r\n

There is no guarantee for anything using this indicator.

\r\n

14.07.18, Terence V. Gronowski, \"Swisstrader\"

", "url": "https://www.mql5.com/pt/market/product/30524", "small_icon": "https://c.mql5.com/31/257/rsi-talking-to-save-your-eyes-logo-60x60-9581.png", "middle_icon": "https://c.mql5.com/31/440/rsi-talking-to-save-your-eyes-logo-140x140-5239.png", "icon": "https://c.mql5.com/31/257/rsi-talking-to-save-your-eyes-logo-200x200-4449.png", "rating": 0, "price": 0, "published": 1532424475, "popularity": 0.06663546381584445, "category": "Indicator", "votes": 0 }, { "id": 30452, "title": "CME Exchange margin zones", "description": "

The utility is designed to display on the chart the margin zones built on the basis of margin requirements for futures of the Chicago Mercantile exchange (CME). These margin zones are good levels of resistance and support, as seen in the screenshots.

\r\n

How to use

\r\n

To trade on margin zones, use the following rules:

\r\n

buy after the day has closed above one of the zones to the next zone;
sell after the day has closed below one of the zones to the next zone;
after opening a sell trade, place limit sell orders from the local minimum from the start time of the zone;
after opening a buy trade, place limit buy orders from the local maximum of the zone from the time the zone starts;
you can use zone 3/4 as a target from zone 1/2 (especially if limit orders are triggered);
for better understanding of the process, see the attached video and screenshots.

\r\n

Control buttons

\r\n

1 - draw the 1/4 zone from the cursor position
2 - draw the 1/2 zone from cursor position
3 - draw the zone 1 from cursor position;
TAB - extend the zone under the cursor;
Shift - delete the zone under the cursor.

\r\n

To build a zone from the border of another zone (for example, zones 3/4, 5/4, etc.), move the cursor closer to the desired edge of the zone and press the number 1, 2 or 3.

\r\n

When plotting from Highs, the cursor should be above the chart, when plotting from Lows, it should be below. The maximum/minimum value in the vicinity of the cursor is determined and a zone is drawn from it.

", "url": "https://www.mql5.com/pt/market/product/30452", "small_icon": "https://c.mql5.com/31/256/cme-exchange-margin-zones-logo-60x60-2378.png", "middle_icon": "https://c.mql5.com/31/440/cme-exchange-margin-zones-logo-140x140-6486.png", "icon": "https://c.mql5.com/31/256/cme-exchange-margin-zones-logo-200x200-7570.png", "rating": 0, "price": 0, "published": 1532424208, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30179, "title": "LevelPAttern MT5", "description": "

LevelPAttern MT5 is a technical indicator based on the daily levels and Price Action patterns. The indicator is based on the standard ZigZag indicator + reversal candlestick pattens, such as Star, Hammer (also knows as Pin bar), Engulfing and others. The indicator generates audio and text notifications when a pattern is formed and a level is touched. It also supports sending email and push notifications.

\r\n

Indicator operation features

\r\n

It is suitable for working with any CFD and FOREX trading instrument. Recommended timeframe - H1, H4 and D1
Formation of a pattern, or level touching + formation of a pattern can be considered a market entry signal
When using this indicator, it is also necessary to take the global trend into account.

\r\n

Parameters

\r\n

number of bars in the history of the indicator - the number of bars analyzed for detection of the Price Action patterns
number of bars to search for levels - the number of bars for plotting levels based on the ZigZag indicator
maximum distance between levels - the maximum distance in points between the breaks (peaks) of the indicator
ZigZag color of daytime levels - color of the daily levels
color of Zigzag levels - color of the ZigZag levels
color of buy trend patterns - color of the patterns directed upward
color of sell trend patterns - color of the patterns directed downward
pat.:hammer - enable/disable the Hammer pattern (hm)

pat.:hammer:max body (in point) - the maximum size of a candle body in points
pat.:hammer:min shadow hammer handle (in % from sweep) - the minimum shadow of the Hammer handle as a percentage of the candle span
pat.:hammer:max shadow opposite hammer handle - the maximum shadow opposite to the Hammer handle as a percentage of the entire candle span

pat.:absorption - enable/disable the Engulfing pattern (abs)
pat.: clouds - enable/disable the Cloud pattern (cloud)

pat.:clouds:min body (in point) - the minimum body size in points
pat.:clouds:min body (in % from sweep) - the minimum body size as a percentage of the entire candle span

pat.:star - enable/disable the Star pattern (star)

pat.:star:min body (in point) - the minimum body size of side candles in points
pat.:star:min body (in % from sweep) - the minimum body size as a percentage of the side candles span
pat.:star:max body star (in point) - the maximum body size in points of the central candle
pat.:star:max body star (in % from sweep) - the maximum body size of the central candle as a percentage of the side candles span
pat.:star:max sweep star (in point) - the maximum span of the central candle in points
pat.:star: max sweep star (in % from the surrounding bars) - the maximum span of the central candle as a percentage of the side candles span

pat.:star(doji) - enable/disable the Start (Doji) pattern star(d)

pat.:star(doji):min body (in point) - the minimum body size of side candles in points
pat.:star(doji):min body (in % from sweep) - the minimum body size as a percentage of the side candles span
pat.:star(doji):max body star (in point) - the maximum body size in points of the central candle (can be 0)
pat.:star(doji):max body star (in % from sweep) - the maximum body size of the central candle as a percentage of the side candles span
pat.:star(doji):max sweep star (in point) - the maximum span of the central candle in points
pat.:star(doji):max sweep star (in % from the surrounding bars) - the maximum span of the central candle as a percentage of the side candles span

notice:alert - enable/disable alerts
notice:email - enable/disable email messages
notice:mobile app - enable/disable push notifications
ZigZag:Depth - Depth of the ZigZag indicator
ZigZag:Deviation - Deviation of the ZigZag indicator
ZigZag:Backstep - Backstep of the ZigZag indicator

", "url": "https://www.mql5.com/pt/market/product/30179", "small_icon": "https://c.mql5.com/31/257/levelpattern-mt5-logo-60x60-7792.png", "middle_icon": "https://c.mql5.com/31/440/levelpattern-mt5-logo-140x140-4901.png", "icon": "https://c.mql5.com/31/257/levelpattern-mt5-logo-200x200-6152.png", "rating": 0, "price": 150, "published": 1532366345, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30686, "title": "MMM Bollinger Bands MACD and MA", "description": "

The EA strategy

\r\n

This EA has a built-in combined Bollinger Bands Trend indicator, MACD and MA that checks the prices trends everytime and opens and closes new orders at the right time;
Recommended for beginner traders because the default input values are optimized to work with acconts with ballance as low as US$ 300;
It protects your profit because it is provided with Trailing Stop Loss, Minimum Equity Percentage to allow any trade, Maximum Spread alowed and you can also define the bad time to trade where you define the hours you don't want the EA to trade.

\r\n

Parameters

\r\n

General Inputs

\r\n

Closes orders with any profit of value (currency): this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: defines the maximum SPREAD value allowed to your trading operations. Set it to ZERO if you won't use it;
Magic Number: this parameter identifies the orders the EA is working with;

\r\n

Bad time to trade

\r\n

Defines the starting hour the EA will not trade (0..23h): this input defines the starting bad hour the EA will not trade;
Defines the starting minute the EA will not Trade (0..59): this input defines the starting bad minute of the starting bad hour the EA will not trade;
Defines the ending hour the EA will not trade (0..23h): this input defines the ending bad hour the EA will not trade;
Defines the ending minute the EA will not Trade (0..59): this input defines the ending bad minute of the ending bad hour the EA will not trade;
Defines the BAD day of week to trade: this input indicates the day of the week the EA should not trade. The tests indicate that Friday is the worst day;

\r\n

Indicator's Inputs

\r\n

Price applied to all indicators: the price used on Bollinger Bands, MACD and MA;

\r\n

MACD Inputs

\r\n

MACD Open Level: the open oscilation level;
MACD Close Level: the close oscilation level;
MACD Fast EMA Period: period used by MACD fast EMA;
MACD Slow EMA Period: period used by MACD slow EMA;
MACD Signal Period: period of MACD signal;
MACD Shift: shift used on MACD indicator;

\r\n

MA inputs

\r\n

MA Trend Period: the trend period used on MA calculations;
MA Shift: the shift used on MA calculations;

\r\n

Bollinger Bands Inputs

\r\n

Bollinger Bands Period: the period used on Bollinger Bands;
Bollinger Bands Deviation: the deviation used on Bollinger Bands;
Bollinger Bands Shift: The shift (number of bars) used on Bollinger Bands calculations.

\r\n

Warning! The default input values are already optimized for EURUSD at time frame M15, current spread and netted account mode with leverage 1:100 and initial deposit of US$ 300. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/30686", "small_icon": "https://c.mql5.com/31/257/mmm-bollinget-bands-macd-and-ma-logo-60x60-1657.png", "middle_icon": "https://c.mql5.com/31/446/mmm-bollinger-bands-macd-and-ma-logo-140x140-8901.png", "icon": "https://c.mql5.com/31/257/mmm-bollinget-bands-macd-and-ma-logo-200x200-2785.png", "rating": 0, "price": 84, "published": 1532359016, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30463, "title": "Synthetic full", "description": "

The indicator displays the chart of an arbitrary combination of trading instruments, described by the entered arithmetic formula.

\r\n

Using the indicator.

\r\n

Add an indicator to any chart.
Enter the formula as a string in the indicator's parameters. All symbols used in the formula must exactly match the names in the table \"Market Overview\" of the terminal. Example of the formula:

(SIBN + SNGS) / 'RTS-3.19' + 2.5 * GAZP / LKOH

Start the indicator

\r\n

The formula must meet the following requirements:

\r\n

The names of the symbols must exactly match the names in the table \"Market Overview\" of the terminal.
In the formula are allowed:

arithmetic operations: '+', '-', '*', '/';
numerical constants;
brackets.

The names of instruments containing arithmetic operations symbols (such as 'RTS-3.19') must be concluded in single quotes ('RTS-3.19').
The spaces in the formula are ignored.

", "url": "https://www.mql5.com/pt/market/product/30463", "small_icon": "https://c.mql5.com/31/261/synthetic-full-logo-60x60-1426.png", "middle_icon": "https://c.mql5.com/31/438/synthetic-full-logo-140x140-8252.png", "icon": "https://c.mql5.com/31/261/synthetic-full-logo-200x200-1809.png", "rating": 0, "price": 0, "published": 1532342093, "popularity": 0.1580321942451401, "category": "Indicator", "votes": 0 }, { "id": 30462, "title": "Fibonacci Manager by Investio", "description": "

What was IFM created for

\r\n

Our goal in creating IFM was to provide the tool to manage your Fibonacci Retrecements and other Fibo tools in MetaTrader 5. This indicator allows you to edit all of the settings without getting into it by right click on the tool. That is faster and easiest way to manage objects on your chart.

\r\n

Inputs

\r\n

Font size - change font size of texts on the IFM panel. This is necessary, because some of users change font size in Windows settings
Description of the Fibo levels (variable: F - level, %$ - price)

default - \"F | %$\" - so description will look like that \"61.8 | 1.1300\"

30 inputs for your Fibo ratios - define your own ratios, which will be presented at the panel
Colors of the IFM Panel - customize IFM to your own preferences

Font color - color of all texts at the panel, without buttons
Background color
pressured button color - background color of pressed button
Font color of the pressed button
Not pressed button color - background color of released button
Font color of the not pressed button

\r\n

How IFM works

\r\n

The IFM Panel appears when you one-click on a chosen Fibo tool. So, after you implemented IFM on the chart, you have to click (not double click!) on one of your Fibonacci Retracement or other Fibo Tool. IFM will select this specific Fibo tool and present you a panel with all the options. Every one of them will change parameters of only this one Fibo tool.

\r\n

\r\n\r\n

Important!

\r\nIf you are using the option \"Select object by single mouse click\" in charts options, it will be causing problems with IFM. You should unmark this checkbox.

\r\n

With one click, you can add or remove the Fibonacci level!

\r\n

Investio Fibonacci Manager (IFM) solves one of the biggest MetaTrader issues - adding and removing Fibo ratios. You can add or remove a level from the Fibonacci Retracements or all other Fibo tools with one click. Just click on the selected level in the list. You can also edit this list and adapt it to your needs!

\r\n

You can define and memorize as many as 30 of your levels!

\r\n

MetaTrader allows adding 32 Fibo levels to your grid. Two are mandatory: 0% and 100%, so you can add 30 more levels. If you use less standard ratios or negative ones, enter them in the settings window and save these settings so that you can reload them in the future.

\r\n

You can change the look of your Fibo tool in a quick and easy way!

\r\n

Investio Fibonacci Manager gives you the ability to set any color from the Webcolor palette available in MetaTrader 5 with one click! You can also change the style and thickness of the line. Remember that these settings also work for other Fibo tools - Fibonacci Fan, Ranges, Fibonacci Time Zones, Fibonacci Arc and Fibonacci Channel.

\r\n

We went a step further and prepared ready-made levels for measuring the ranges of waves according to Elliott!

\r\n

IFM defines ratios that you can quickly turn on when you measure specific ranges. This is an extremely useful thing when you use Elliott Wave. With one click, you can disable measuring the end of wave A or wave B or C. Similarly, you can do that for the 5th wave range measured from the 1st or 4th wave. All this makes using the Fibo tools even easier!

\r\n

You can also change the IFM colors to better suit your desktop

\r\n

The color of each element of the Investio Fibonacci Manager is editable. Investio colors are set by default.

", "url": "https://www.mql5.com/pt/market/product/30462", "small_icon": "https://c.mql5.com/31/256/fibonacci-manager-by-investio-logo-60x60-4867.png", "middle_icon": "https://c.mql5.com/31/440/fibonacci-manager-by-investio-logo-140x140-9443.png", "icon": "https://c.mql5.com/31/256/fibonacci-manager-by-investio-logo-200x200-2744.png", "rating": 4, "price": 40, "published": 1532098192, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 29704, "title": "Gauge Classic Series", "description": "

This is a series of gauges that can be loaded on any Chart time frame. You can use this gauge indicators to decide when to enter and exit market with high degree of confident.

\r\n

Gauge No 1: Ichimoku Kinko Hyo Tenken Sen Crosses Kijun Sen. This will tell Bull and Bear and the timing to enter market. When the value move from above 0 towards below 0, the Tenken Sen line is moving to cross the Kijun Sen line and appears value is the Delta for the difference. Same goes to the opposite. The positive value is Bullish move while the negative value is Bearish move.

\r\n

Gauge No 2: MACD cross 0. This will tell STRONG Bull and Bear. When the value move from above 0 towards below 0, it indicates the market is changing the trend from Bull to Bear. When the value move from below 0 towards above 0, it indicates the market is changing the trend from Bear to Bull. It's simple.

\r\n

Gauge No 3: Force Index % level indicator with Force Index current Value against recent Low and high limit. The Limit is automatically adjusted and affected the Scale High and Low. This should be treated as Price movement towards Bullish (Positive value) or Bearish (Negative value).

\r\n

Gauge No 4: Your P&L Indicator.

\r\n

The Parameters as follows

\r\n

Indicator size: Set the size of the Indicator.
Indicator is in the background: True/False. Set the gauge indicator to appears on the background or not.
Scale transparency level, 0..255: Set the transparency of the gauge.
Needle transparency level, 0..255: Set the transparency of the needle on the gauge.

", "url": "https://www.mql5.com/pt/market/product/29704", "small_icon": "https://c.mql5.com/31/248/gauge-classic-series-logo-60x60-1603.png", "middle_icon": "https://c.mql5.com/31/441/gauge-classic-series-logo-140x140-7296.png", "icon": "https://c.mql5.com/31/248/gauge-classic-series-logo-200x200-9575.png", "rating": 0, "price": 39, "published": 1532020937, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30461, "title": "Important Lines", "description": "

This indicator displays Pivot-Lines, preday high and low, preday close and the minimum and maximum of the previous hour. You just have to put this single indicator to the chart to have all these important lines, no need to setup many single indicators.

\r\n

Why certain lines are important

\r\n

Preday high and low: These are watched by traders who trade in a daily chart. Very often, if price climbs over or falls under a preday low/high there is an acceleration in buying/selling. It is a breakout out of a daily range.

\r\n

Prehour high and low: Are watched by breakout traders who trade in the hourly chart. The opening range breakout strategy (see Toby Crabel) uses the hourly range of the past hourly candle and trades the breakout at the market opening. Placing stop loss near the hour lines may be very effective.

\r\n

Pivot Points: Pivots stem from the former pit traders who needed a quick and rough orientation of the situation of the price. Today still many traders look at these points. When trading, the pivot point, the supports (s1, s2, s3) or resistances (r1, r2, r3) cause the price to slow down or even turn.

\r\n

Calculation Methods

\r\n

Pivots:

\r\n

Pivot Point = (high + close + low)/3 (preday)

\r\n

r1 = (2 * pivot) - low

\r\n

s1 = (2 * pivot) - high

\r\n

r2 = pivot + (r1 - s1)

\r\n

r3 = high + (2* (pivot - low))

\r\n

s2 = pivot - (r1 - s1)

\r\n

s3 = low - (2*(high - pivot));

\r\n

All the other lines are derived from the history of MetaTrader 5.

\r\n

Customization

\r\n

The colors of the lines and labels can be customized.

\r\n

pivotColor
s1Color
s2Color
s3Color
r1Color
r2Color
r3Color
lowH1Color
hiH1Color
PDHColor
PDLColor
PDCColor

\r\n

Why did I program this indicator

\r\n

As I started with MetaTrader 5 about a year ago I did not find any matching indicator. As I used it every day, I thought that it could be of use for other traders too.

\r\n

This indicator is used in conjunction of my Opening Range Breakout robot I will publish soon. I plan to make this indicator \"speaking\". So it will be possible to \"trade what you see and hear\".

\r\n

Issues and disclaimer

\r\n

I use this indicator for about half a year, in general, it runs well.

\r\n

On Mondays it might show wrong numbers, it might be, that it takes data from Saturday.

\r\n

There is no guarantee for this product in no way.

\r\n

12.7.2018, Terence V. Gronowski \"SwissTrader\"

", "url": "https://www.mql5.com/pt/market/product/30461", "small_icon": "https://c.mql5.com/31/255/important-lines-logo-60x60-3645.png", "middle_icon": "https://c.mql5.com/31/439/important-lines-logo-140x140-2419.png", "icon": "https://c.mql5.com/31/255/important-lines-logo-200x200-2579.png", "rating": 4.875, "price": 0, "published": 1532014918, "popularity": 4.559570532275894, "category": "Indicator", "votes": 24 }, { "id": 30441, "title": "CloneChartMT5", "description": "

This utility clones the chart it is running on. It opens the same chart with the same graphical objects, set of indicators (saving the parameters) and the rest of the elements. In essence, it performs a deep copying of the original chart, transferring the template to the opened chart. The symbol and the timeframe of the original chart are also saved.

", "url": "https://www.mql5.com/pt/market/product/30441", "small_icon": "https://c.mql5.com/31/255/clonechartmt5-logo-60x60-4751.png", "middle_icon": "https://c.mql5.com/31/440/clonechartmt5-logo-140x140-6418.png", "icon": "https://c.mql5.com/31/255/clonechartmt5-logo-200x200-4510.png", "rating": 5, "price": 0, "published": 1531849894, "popularity": 0.13333282914439273, "category": "Utility", "votes": 1 }, { "id": 30098, "title": "MultiCurrency Spread Trend EA", "description": "

Premise

\r\n

SpreadTrend EA is a software that analyzes correlations and the spread between five forex pairs in search of a momentum of entry that can allow obtaining a statistical advantage to reach profit.

\r\n

What is Spread Trading

\r\n

The Spread Trading is the study of the strength of two currency pairs at the same time in order to assess which of the pair is able to outperform the other. The object of the study is the correlation, volatility in time and the strength of trend.

\r\n

What are advantages of Spread Trading

\r\n

Benefits are numerous and can be summarized in the following points:

\r\n

Hedging portfolio by not using Stop Loss.
Never suffering from hunting Stop Loss that brokers are so good at doing!
Do not need to worry about a market crash, like the recent decision of the Swiss National Bank to abandon the defense share of 1.20 EURCHF.
The repercussions of the decisions of the ECB rate or policies of quantitative easing etc.

\r\n

Why I spend time on Spread Trading

\r\n

The spread trader aims to evaluate and control the prices of an underlying asset with respect to the prices of the underlying asset with different maturities or with related underlying prices.

\r\n

For example, check how the EURUSD price evolves against the GBPUSD price. Or how the price of the future on the DAX expires in March with respect to the one with an expiry in June.

\r\n

Spread trading requires strong insight from the trader. A good trader should not only look at the current price but how this evolves over time compared to other factors.

\r\n

Making spread trading requires the ability to maintain and view different future scenarios in a single moment.

\r\n

Spread trading can be applied both in the phases of trending markets and in phases of severe turbulence.

\r\n

Spread trading on forex

\r\n

To study the cycles of spread trading in forex, it is necessary to use specific tools that I have built over time based on my experience of errors and successes.

\r\n

To calculate the spread and its direction, I created a proprietary formulas and used them on this Expert Advisor.

\r\n

Inputs

\r\n

List of forex pairs to use and their lot

\r\n

firstInstrument = \"symbol1\"; --> first instrument to trade like \"EURUSD\"

traders can choose the other symbols on secondInstrument, thirdInstrument, fourthInstrument and fifthInstrument input parameters.

firstlots=0.1;

trader can choose the other lots on secondlots, thirdlots, fourthlots and fifthlots inputs.

\r\n

Long and Short Spreads activations

\r\n

LongSpread=true;
ShortSpread=true;

\r\n

Trend and Spread filter timeframe

\r\n

TF_filtro = PERIOD_H4; ---> trend filter timeframe
TF_Spread=PERIOD_D1; ---> timeframe to use to calculate the spreads

\r\n

Comments and Magic for trades

\r\n

comment=\"MSpread EA 2018\";
stime=\"--- Magic & Work Timing\";
magic2 = 3456;

\r\n

Pip distance for pending orders

\r\n

srange=\"--- pending pip distance\";

range = 20;

\r\n

Closure spread rules

\r\n

SpreadToClose = -150; // value in pips

sBalance=\"--- Start balance of the account to check ---\";

StartBalance=50000;

spDD=\"--- Max DrawDown\";

DDtoClose=25000;

sDD=\"--- DD Management\";

DD_2 = 199;
MM_2 = 1; // lot multiplicator after DD (1 is off)
sProfit=\"--- Profit in money\";
Profit=149;
RR=1; // Risk Reward Ratio

\r\n

Max spreads to open

\r\n

maxsell = 2;
maxbuy = 2;

\r\n

Time hour to trade

\r\n

timestart=0;
timestop=25;

\r\n

Alerts and notifications

\r\n

PopUpAlert= false; //popup alert
PushAlert=true; //push notifications alert

\r\n

Text color and size to print on the chart

\r\n

color Color_Text = clrYellow;
text_dim = 8

\r\n

HIGH RISK WARNING: Foreign exchange trading carries a high level of risk that may not be suitable for all investors. Leverage creates additional risk and loss exposure. Before you decide to trade foreign exchange, carefully consider your investment objectives, experience level and risk tolerance. You could lose some or all of your initial investment; do not invest money that you cannot afford to lose. Educate yourself on the risks associated with foreign exchange trading, and seek advice from an independent financial or tax advisor if you have any questions. Any data and information are provided 'as is' solely for informational purposes, and are not intended for trading purposes or advice.

", "url": "https://www.mql5.com/pt/market/product/30098", "small_icon": "https://c.mql5.com/31/252/multicurrency-spread-trend-ea-logo-60x60-9138.png", "middle_icon": "https://c.mql5.com/31/445/multicurrency-spread-trend-ea-logo-140x140-1370.png", "icon": "https://c.mql5.com/31/252/multicurrency-spread-trend-ea-logo-200x200-2100.png", "rating": 0, "price": 0, "published": 1531846467, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30360, "title": "Demo Information panel for traders", "description": "

This utility displays the information required for making trades on each opened chart. For example: spread value, swap value; triple swap day; session closing time; ATR of the symbol by Gerchik; total profit/loss for the current symbol; the number of trades made earlier; the percentage change in the quotes of 6 selected instruments; and much more.

\r\n

The spread value is always shown. The rest of the information is displayed depending on the settings:

\r\n

Show total orders at the moment (long, short). If the broker provides such information, the utility shows the volume of long and short trades for the current day.
Show minimum stop: points (currency). Show the minimum stop distance (in points and in the profit currency) from the current price. For example, if the minimum stop is 5 cents, while the current price is $10, then you will not be able to set stop loss at $9.97, only at $9.94.
Show margin: in long, in shorts. Show the margin required to buy a minimum lot.
Display swap information: long - short - triple swap day. Show information about the swap (the amount to be paid for the position rollover) both for long and for short positions. It also shows the day of the triple swap for this instrument.
Display: session closing time (left until) - period. Display the trading closure time for the instrument, as well as the time left until the closure. If a timeframe smaller than daily is currently selected on the chart, then the utility also shows the number of minutes left until a new bar opens.
Apply the template we.tpl to the graphs. If enabled, a template with the name 'my' will be automatically applied to each opened chart. Please note that before enabling this function, it is necessary to create the 'my' template. To do this, use the Templates/Save template… item of the chart's context menu. The templates save the indicators, the selected scale, the chart type and other information, including the EA currently running on the chart. For this reason, do not create a template on a chart where this EA is running. Otherwise, when opening every new chart window, it will also launch this EA.
Show the bar panel of the new bar on the chart of the Expert Advisor. Show additional panel with information on new bar times for different timeframes on the chart where the EA is running. If any of the timeframes on the panel is ticked, then a sound signal will be played a minute before a new bar on the selected timeframe.
You can quickly tick/untick a timeframe by pressing a corresponding number on the keyboard. For example, 1 - for M15, 2 - for M30, etc.
Notify about the completion of the order (both the take and the stop loss). Use a sound notification about reaching a take profit or stop loss level of current deals.
Display ATR for the given number of days (0 - no). Show the daily ATR of the instrument according to Gerchik. That is, without consideration of abnormally large or small bars.
Show bars on the chart for the specified number of days. Show a vertical line on the bar, separating the selected number of days. For example, with this setting you can visualize where the bars for the last 3 days end on the chart.
Show general direction on the specified symbols (D1, H4). Display the percentage change of quotes of 6 selected instruments for the day and for the last hour. This allows you to easily assess the overall market situation.
Show profitability of trades: currency (qty). Display the statistics on the deals previously made on the instrument: the amount of profit or loss, the total number of deals, the number of profitable and unprofitable deals.

\r\n

Simply attach the EA to one of th charts, and the selected information will be displayed on each chart. The display type depends on the value selected in the drop-down list The way information is displayed. You can display the information either in the chart comment (in the upper left corner) or in a separate panel in one of the four corners.

\r\n

The demo version works only on the first 2 symbols.

", "url": "https://www.mql5.com/pt/market/product/30360", "small_icon": "https://c.mql5.com/31/255/demo-information-panel-for-traders-logo-60x60-1921.png", "middle_icon": "https://c.mql5.com/31/445/demo-information-panel-for-traders-logo-140x140-4976.png", "icon": "https://c.mql5.com/31/255/demo-information-panel-for-traders-logo-200x200-8113.png", "rating": 0, "price": 0, "published": 1531759827, "popularity": 0.021198138534524534, "category": "Utility", "votes": 0 }, { "id": 30245, "title": "Information panel for traders", "description": "

\r\n

The spread value is always shown. The rest of the information is displayed depending on the settings:

\r\n

Show total orders at the moment (long, short). If the broker provides such information, the utility shows the volume of long and short trades for the current day.
Show minimum stop: points (currency). Show the minimum stop distance (in points and in the profit currency) from the current price. For example, if the minimum stop is 5 cents, while the current price is $10, then you will not be able to set stop loss at $9.97, only at $9.94.
Show margin: in long, in shorts. Show the margin required to buy a minimum lot.
Display swap information: long - short - triple swap day. Show information about the swap (the amount to be paid for the position rollover) both for long and for short positions. It also shows the day of the triple swap for this instrument.
Display: session closing time (left until) - period. Display the trading closure time for the instrument, as well as the time left until the closure. If a timeframe smaller than daily is currently selected on the chart, then the utility also shows the number of minutes left until a new bar opens.
Apply the template we.tpl to the graphs. If enabled, a template with the name 'my' will be automatically applied to each opened chart.
Please note that before enabling this function, it is necessary to create the 'my' template. To do this, use the Templates/Save template… item of the chart's context menu.
The templates save the indicators, the selected scale, the chart type and other information, including the EA currently running on the chart. For this reason, do not create a template on a chart where this EA is running. Otherwise, when opening every new chart window, it will also launch this EA.
Show the bar panel of the new bar on the chart of the Expert Advisor. Show additional panel with information on new bar times for different timeframes on the chart where the EA is running. If any of the timeframes on the panel is ticked, then a sound signal will be played a minute before a new bar on the selected timeframe. You can quickly tick/untick a timeframe by pressing a corresponding number on the keyboard. For example, 1 - for M15, 2 - for M30, etc.
Notify about the completion of the order (both the take and the stop loss). Use a sound notification about reaching a take profit or stop loss level of current deals.
Display ATR for the given number of days (0 - no). Show the daily ATR of the instrument according to Gerchik. That is, without consideration of abnormally large or small bars.
Show bars on the chart for the specified number of days. Show a vertical line on the bar, separating the selected number of days. For example, with this setting you can visualize where the bars for the last 3 days end on the chart.
Show general direction on the specified symbols (D1, H4). Display the percentage change of quotes of 6 selected instruments for the day and for the last hour. This allows you to easily assess the overall market situation.
Show profitability of trades: currency (qty). Display the statistics on the deals previously made on the instrument: the amount of profit or loss, the total number of deals, the number of profitable and unprofitable deals.

\r\n

Simply attach the EA to one of th charts, and the selected information will be displayed on each chart. In this case, the display type depends on the value selected in the drop-down list The way information is displayed. You can display the information either in the chart comment (in the upper left corner) or in a separate panel in one of the four chart corners.

", "url": "https://www.mql5.com/pt/market/product/30245", "small_icon": "https://c.mql5.com/31/255/information-panel-for-traders-logo-60x60-8493.png", "middle_icon": "https://c.mql5.com/31/445/information-panel-for-traders-logo-140x140-9034.png", "icon": "https://c.mql5.com/31/255/information-panel-for-traders-logo-200x200-3826.png", "rating": 0, "price": 30, "published": 1531759822, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30350, "title": "TrendSwing", "description": "

TrendSwing is a professional Expert Advisor, which implements the strategy of trading using neural networks. Operation principle - following the market. Using a neural network, it is possible to generate signals in such a way that every signal in the market appears in the right direction. The position is adjusted all the time. When a signal opposite to the existing position appears, the summary position is adjusted (that is, the position is opened in parts and closed also in parts). Thus, the EA constantly follows the price.

\r\n

In order to diversify the funds efficiently, it is recommended using the multicurrency operation mode, at which multiple currency pairs are selected, thus reducing the risk. The Expert Advisor correctly handles errors and reliably works with a deposit of 1000 USD and higher. You can start working on a five-minute chart.

\r\n

In this case, the configuration of the neural network is very simple. Training takes place during optimization. Adjustment of the neural network's weights is stored in the settings.

\r\n

Training of the neural network (optimization) is required for work! Optimization by Open prices is sufficient. Works with Netting accounts!

\r\n

The EA does not use dangerous strategies such as averaging or martingale, but strictly adheres to the neural network instructions. Stop loss and take profit are set for each trade. The Expert Advisor correctly handles errors and reliably works with a deposit of 1000-10000 USD and higher. The default working timeframe is H1. But any other timeframe or currency pair can be used. The higher the timeframe the better the predictability.

\r\n

Training of a neural network is performed on a data sample (historical data). The training process follows a genetic algorithm and as it goes on, the network reaction to input signals should be improving. It remains only to check how accurately the optimized parameters predict the future. This is done by a step-by-step verification of results. Markets change, therefore, it is necessary to constantly modify the strategies. The neural network save the trouble of constantly changing the strategy, it is sufficient to simply retrain the system for the current market situation.

\r\n

Parameters

\r\n

TypeFilling - sets order filling type.
Magic - sets the magic number.
LimitSpread - spread limit.
Risk - lot calculation depending on the deposit. We recommend that you use Risk, rather than Lot.
Lot - sets lot size for market entry (overrides Risk).
TP, SL - Stop Loss and Take Profit.
DrawDown - the maximum drawdown, at which closing occurs (in % of a deposit).
DrawUp - the maximum profit, at which closing occurs (in % of a deposit).
IndicatorA, IndicatorB, IndicatorC - three indicators for analysis.
TFIndicatorA, TFIndicatorB, TFIndicatorC - timeframes of the indicators.
ShiftIndicatorA, ShiftIndicatorB, ShiftIndicatorC - shifts of the indicators.
PeriodIndicatorA, PeriodIndicatorB, PeriodIndicatorC - periods of the indicators.
LevelSell - level for entering the market by a sell signal from a neural network.
LevelBuy - level for entering the market by a buy signal from a neural network.
wb0 - wb11 - weights for the neural network (these are the settings that store the logic of the neural network directly in the .set file).

\r\n

Parameters for optimization with a Custom target:

\r\n

OPT_TRADES, OPT_BALANCE_DD, OPT_EQUITY_DD - Minimum (trades, drawdown by balance, drawdown by equity) for the corresponding parameter.
CORRECT_TRADES, CORRECT_BALANCE_DD, CORRECT_EQUITY_DD - adjustment of the target by the corresponding parameter.

", "url": "https://www.mql5.com/pt/market/product/30350", "small_icon": "https://c.mql5.com/31/254/trendswing-logo-60x60-5039.png", "middle_icon": "https://c.mql5.com/31/439/trendswing-logo-140x140-2959.png", "icon": "https://c.mql5.com/31/254/trendswing-logo-200x200-5202.png", "rating": 0, "price": 160, "published": 1531759787, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30305, "title": "Snake EURUSD", "description": "

Snake EURUSD Real EA is a fully automatic Forex Trading Expert Advisor. The robot can run on any pair, but the results are better on EURUSD M15. The system can run with any broker that also provides Floating Spread.

\r\n

Advantages

\r\n

The EA does not use systems like martingale, hedging, etc.
The EA uses SL and Trailing Stop to make a profit.
In addition, you can also set TP (EURUSD at 93 for me).
Best test results with 99.0% in the backtest.
It is not necessary to close the EA during the press releases.
The magic number should be changed for every other pair (when two pairs work with the EA).
The EA works 24 hours a day and should be issued by hand on Friday.

\r\n

Recommendation

\r\n

\r\n The robot has several parameters that affect the quality of the terminations.
\r\n
Example:
\r\n
You can optimize the trading time settings in different tenses.
\r\n
Parameters should not be optimized within a short time, this leads to overfitting.

\r\n

Properties

\r\n

Entry lots=0.01 — fixed lots.
Stop Loss (pips)=54 — distance to stop loss.
Take Profit (pips)=0 — distance to take profit.
RVI Signal — entry signal
RSI Signal — entry signal
MACD Signal — entry signal
Stochastic — entry signal

\r\n

Trading hours: Optimize the trading margin in the tester to get the best quality of the entries.

\r\n

If you have purchased the product and/or have questions, send me a private message.

", "url": "https://www.mql5.com/pt/market/product/30305", "small_icon": "https://c.mql5.com/31/254/snake-eurusd-logo-60x60-1187.png", "middle_icon": "https://c.mql5.com/31/445/snake-eurusd-logo-140x140-3230.png", "icon": "https://c.mql5.com/31/254/snake-eurusd-logo-200x200-4534.png", "rating": 0, "price": 4500, "published": 1531501830, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26107, "title": "TSO Price Channel MT5", "description": "

TSO Price Channel is complete trading strategy focused on creating profit from market volatility. The system takes advantage of the intrinsic tendency of the market to reach its periodic maximum and minimum levels. By allowing the use of multiple instruments, the exposure of the system to any single instrument is reduced.

\r\n

Complete strategy including fully integrated positive and negative management.
Works on any instrument.
No pending orders placed.
Any account size - $1,000+ is recommended.

\r\n

Backtesting

\r\n

Based on a 7-year backtest period, the system has demonstrated the ability to adapt to any type of market scenario. This can be seen in the screenshots below demonstrating its performance. This setup is currently running in a real account and it is also available to rent as a signal at https://www.mql5.com/en/signals/400167. The inputs used in this setup are the default values for this EA.

\r\n

Inputs

\r\n

Portfolio Symbols: The symbols of the instruments to be traded, separated by commas without spaces. E.g. EURUSD,GBPUSD,USDCHF.
Base Lot per Symbol: The minimum lot size to be traded for each instrument, separated by commas without spaces. Lot sizes must be in the same order as their corresponding instrument. E.g. for EURUSD and GBPUSD to have a minimum lot of 0.1 and USDCHF a minimum lot of 0.08 the input would be 0.1,0.1,0.08.
Lots Limit per Symbol: The maximum lot size that will be opened in a single order per bar for each instrument, separated by commas without spaces. Fill this input in the same fashion as Base Lot per Symbol.
Dynamic Lot Size: Set to true for the base lot size to be adjusted automatically in proportionality to the balance. Base lot will increase or decrease proportionally as the balance changes.
Initial Balance: Required only if Dynamic Lot Size is enabled. It is the initial balance when the EA was first started. This ensures that lot size - balance proportionality is maintained even if the EA is terminated and then restarted.
Entry Signal Period per Symbol: The lookback period used to produce the entry signal for each instrument, separated by commas without spaces. Typical values can range from 5-300. Fill this input in the same fashion as Base Lot per Symbol.
Exit Signal Period per Symbol: The lookback period used to produce the exit signal for each instrument, separated by commas without spaces. Typical values can range from 5-300. Fill this input in the same fashion as Base Lot per Symbol.
Risk Reducer per Symbol: A mechanism used to filter out periods of low market volatility and, thus, riskier entries. Causes a delay in entry but can create better quality entries. A value between 0 (Disabled) and 10 (Strong Filtering) is recommended for each instrument, separated by commas without spaces. Fill this input in the same fashion as Base Lot per Symbol.
Booster: A mechanism used to increase the base lot size of trades with a stronger entry signal. The higher the setting, the greater the lot size boost but also the risk. The MEDIUM setting is recommended as the best risk-reward option.
Safe Stop Button: It is recommended to always set to true in order to have a safe stop button appear on the chart running the EA. Pressing the button would then stop the EA from opening new positions beyond those necessary for the strategy. This allows to terminate the EA without any open positions.

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this Expert Advisor can result in open trades that last from hours to days and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

", "url": "https://www.mql5.com/pt/market/product/26107", "small_icon": "https://c.mql5.com/31/247/tso-top-bottom-divergence-chaikin-oscillator-mt5-logo-60x60-3012.png", "middle_icon": "https://c.mql5.com/31/446/tso-price-channel-mt5-logo-140x140-2330.png", "icon": "https://c.mql5.com/31/247/tso-top-bottom-divergence-chaikin-oscillator-mt5-logo-200x200-9199.png", "rating": 0, "price": 1750, "published": 1531501667, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30422, "title": "PlugnTrade Si", "description": "

Plug’n’Trade Si is a trading robot with a minimum amount of input parameters.\r\n The robot is designed for trading the USD futures contract (Si) on FORTS.

\r\n

Plug’n’Trade applies technical indicators for a mathematical analysis of the price movement. The EA automatically sets the stop loss level, moves SL to breakeven and takes profit. Plug’n’Trade works on the M15 chart. All computations are performed when a new candle forms.

\r\n

This robot does not require optimization and is easy to use.

\r\n

Instructions and Recommendations

\r\n

Plug’n’Trade should be running on a valid Si contract with the M15 period. The robot performs all calculations when a new candle forms. Therefore, the robot should be enabled before each new candle forms.

\r\n

The robot does not change the contract automatically. Therefore, close a trade on an expiring contract and launch the robot on a new one.

\r\n

I recommend launching a robot on a virtual MetaTrader server not to miss entry or exit points which is most important when the robot takes profit.

\r\n

Parameters

\r\n

Volume – fixed volume (the number of traded contracts) to be used by the robot if dynamic volume is disabled.
Dynamic Volume – dynamic volume. If enabled, the robot uses the specified percentage of the account balance. If the balance grows, the traded volume increases automatically, and decreases in case of a drawdown.
% of balance to use – percentage of the account balance to be used for trading, if the dynamic volume is enabled.

", "url": "https://www.mql5.com/pt/market/product/30422", "small_icon": "https://c.mql5.com/31/255/plugntrade-si-logo-60x60-1122.png", "middle_icon": "https://c.mql5.com/31/440/plugntrade-si-logo-140x140-5794.png", "icon": "https://c.mql5.com/31/255/plugntrade-si-logo-200x200-6630.png", "rating": 0, "price": 150, "published": 1531416234, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30344, "title": "Copy MT5 MT5 demo", "description": "

Demo copier of deals from MetaTrader 5 to MetaTrader 5 (MetaTrader 4<->MetaTrader 4 version is available; with both versions, you can copy MetaTrader 5<->MetaTrader 4, MetaTrader 4<->MetaTrader 5, MetaTrader 5<->MetaTrader 5, MetaTrader 4<->MetaTrader 4).

\r\n

Works only in the mode of hedging.

\r\n

Spread filter.
Select the best price (start copying positions with a profit or loss).
Configure the lot size, fixed or ratio-based (provider signals can be copied with an increased lot).
Configure order copying (include pending orders or copy only open positions).
Select of trading time.
Copy Take profit and Stop Loss or select custom values.
Add/remove suffixes and prefixes, and also replace symbols if they are different.
Time of order relevance.
Copy from one to several terminals.

\r\n

The copier runs both as the provider of trades (master) and the receiver of trades (slave).

\r\n

Settings for Master account

\r\n

Mode - select the operation mode: master or slave.
TimerMs - update frequency: writing for master, reading for slave.
AddPrefix - add a prefix to symbols on master.
AddSuffix - add a suffix to symbols on master.
DelPrefix - remove a prefix from symbols on master.
DelSuffix - remove a suffix from symbols on master.
ReplaceSymbols - replace symbols by the specified values on the master (separated by commas).
OffsetHourForMaster - offset of the time zone from master. For example, if the master account has a time zone greater by one hour, set a value of -1 to equalize master and slave.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

\r\n

Settings for slave account

\r\n

Mode - select the operation mode: master or slave.
Account - master account number for copying its deals.
TimerMs - update frequency: writing for master, reading for slave.
RelevanceSec - order relevance time for copying, in seconds (if more time passed on the master after an order is opened, it will not be copied).
LimitOrders - copy limit orders; if disabled, only market orders are copied.
OrdersPlus - copy market orders with the specified profit in pips; 0 - disabled.
OrdersMinus - copy market orders with the specified loss in pips; 0 - disabled.
AllowableSpread - maximum allowed spread for copying.
MondayStart - time on Monday to start copying deals.
MondayFinish - time on Monday to stop copying deals.
TuesdayStart - time on Tuesday to start copying deals.
TuesdayFinish - time on Tuesday to stop copying deals.
WednesdayStart - time on Wednesday to start copying deals.
WednesdayFinish - time on Wednesday to stop copying deals.
ThursdayStart - time on Thursday to start copying deals.
ThursdayFinish - time on Thursday to stop copying deals.
FridayStart - time on Friday to start copying deals.
FridayFinish - time on Friday to stop copying deals.
FixedLot - applies only to slave accounts. If greater than zero, the specified fixed lot is used. If it is zero, then the lot size of the master multiplied by coefficient (LotCoef) is used.
LotCoef - coefficient to multiply the master lot.
Takeprofit - custom fixed take profit.
Stoploss - custom fixed stop loss.
TakeprofitFromMaster - use take profit values from deals on master.
StoplossFromMaster - use stop loss values from deals on master.
Slippage - slippage in points when opening deals.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

", "url": "https://www.mql5.com/pt/market/product/30344", "small_icon": "https://c.mql5.com/31/254/copy-mt5-mt5-demo-logo-60x60-4095.png", "middle_icon": "https://c.mql5.com/31/447/copy-mt5-mt5-demo-logo-140x140-2589.png", "icon": "https://c.mql5.com/31/254/copy-mt5-mt5-demo-logo-200x200-1025.png", "rating": 0, "price": 0, "published": 1531415760, "popularity": 0.05867108633132745, "category": "Utility", "votes": 0 }, { "id": 30288, "title": "Copy MT5 MT5", "description": "

Copier of deals from MetaTrader 5 to MetaTrader 5 (MetaTrader 4<->MetaTrader 4 version is available; with both versions, you can copy MetaTrader 5<->MetaTrader 4, MetaTrader 4<->MetaTrader 5, MetaTrader 5<->MetaTrader 5, MetaTrader 4<->MetaTrader 4).

\r\n

There is a demo version (restricting by grades and by lots)

\r\n

Works only in the mode of hedging

\r\n

Spread filter.
Select the best price (start copying positions with a profit or loss).
Configure the lot size, fixed or ratio-based (provider signals can be copied with an increased lot).
Configure order copying (include pending orders or copy only open positions).
Select of trading time.
Copy Take profit and Stop Loss or select custom values.
Add/remove suffixes and prefixes, and also replace symbols if they are different.
Time of order relevance.
Copy from one to several terminals.

\r\n

The copier runs both as the provider of trades (master) and the receiver of trades (slave).

\r\n

Settings for Master account

\r\n

Mode - select the operation mode: master or slave.
TimerMs - update frequency: writing for master, reading for slave.
AddPrefix - add a prefix to symbols on master.
AddSuffix - add a suffix to symbols on master.
DelPrefix - remove a prefix from symbols on master.
DelSuffix - remove a suffix from symbols on master.
ReplaceSymbols - replace symbols by the specified values on the master (separated by commas).
OffsetHourForMaster - offset of the time zone from master. For example, if the master account has a time zone greater by one hour, set a value of -1 to equalize master and slave.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

\r\n

Settings for Slave account

\r\n

Mode - select the operation mode: master or slave.
Account - master account number for copying its deals.
TimerMs - update frequency: writing for master, reading for slave.
RelevanceSec - order relevance time for copying, in seconds (if more time passed on the master after an order is opened, it will not be copied).
LimitOrders - copy limit orders; if disabled, only market orders are copied.
OrdersPlus - copy market orders with the specified profit in pips; 0 - disabled.
OrdersMinus - copy market orders with the specified loss in pips; 0 - disabled.
AllowableSpread - maximum allowed spread for copying.
MondayStart - time on Monday to start copying deals.
MondayFinish - time on Monday to stop copying deals.
TuesdayStart - time on Tuesday to start copying deals.
TuesdayFinish - time on Tuesday to stop copying deals.
WednesdayStart - time on Wednesday to start copying deals.
WednesdayFinish - time on Wednesday to stop copying deals.
ThursdayStart - time on Thursday to start copying deals.
ThursdayFinish - time on Thursday to stop copying deals.
FridayStart - time on Friday to start copying deals.
FridayFinish - time on Friday to stop copying deals.
FixedLot - applies only to slave accounts. If greater than zero, the specified fixed lot is used. If it is zero, then the lot size of the master multiplied by coefficient (LotCoef) is used.
LotCoef - coefficient to multiply the master lot.
Takeprofit - custom fixed take profit.
Stoploss - custom fixed stop loss.
TakeprofitFromMaster - use take profit values from deals on master.
StoplossFromMaster - use stop loss values from deals on master.
Slippage - slippage in points when opening deals.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

", "url": "https://www.mql5.com/pt/market/product/30288", "small_icon": "https://c.mql5.com/31/254/copy-mt5-mt5-logo-60x60-4016.png", "middle_icon": "https://c.mql5.com/31/440/copy-mt5-mt5-logo-140x140-9574.png", "icon": "https://c.mql5.com/31/254/copy-mt5-mt5-logo-200x200-9460.png", "rating": 0, "price": 30, "published": 1531415755, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30313, "title": "SRFactor mt5", "description": "

\r\n

This indicator identifies short-term, medium-term and long-term highs and lows of the market according to the method described by Larry Williams in the book \"Long-term secrets to short-term trading\".

\r\n

Brief description of the principle of identifying the market highs and lows

\r\n

A short-term high is a high of a bar with lower highs on either side of it, and, conversely, a short-term low of a bar is a low with higher lows on either side of it. Medium-term highs and lows are determined similarly: a medium-term high is a short-term high with lower short-term highs on either side of it, a medium-term low is a short-term low with higher short-term lows on either side of it. Long-term extremes are determined by the same principle, depending on the nearest medium-term highs and lows. Inside bars with a lower high and a lower low than that of the previous bar are not taken into account during the analysis. Thus, the short-term extremes are determined with a delay of at least one bar.

\r\n

Using the indicator for technical analysis of the market

\r\n

The position of an instrument's price relative to the indicator lines, as well as the position of the indicator lines relative to each other, gives an idea of the trend development, allows you to quickly find the support and resistance levels, determine the potential for the price to grow (fall) by long-term highs and lows. This indicator will be useful for creating automatic trading systems, as it allows you to quickly determine the trend direction programmatically.

\r\n

Rebound of the price from a high or a low is a confirmation of a support or a resistance level presence and serves as a signal for opening deals at the next breakout or a rebound from this level. You can find additional information on entry signals in the book by Larry Williams.

\r\n

The indicator does not redraw the lines once they are broken and does not reposition the medium-term and long-term highs (lows). If a short-term high (low) turns out to be higher (lower), it is possible to determine the trend based on the position of the indicator lines relative to each other. In some cases, when an outside bar is formed, the short0term low may be higher than the short-term high. This is not an error in the indicator logic, ad can serve as an entry point to a short or long position (see Figure 1). This principle is used in signals of the first type in the SRVector indicator.

\r\n

Parameters

\r\n

Show short-term extremes - show the short-term levels;
Show medium-term extremes - show the medium-term levels;
Show long-term extremes - show the long-term levels;
Prices for building extremes - plot the levels based on high and low prices, or based on open and close prices of the bars.

", "url": "https://www.mql5.com/pt/market/product/30313", "small_icon": "https://c.mql5.com/31/254/srfactor-mt5-logo-60x60-1660.png", "middle_icon": "https://c.mql5.com/31/439/srfactor-mt5-logo-140x140-5725.png", "icon": "https://c.mql5.com/31/254/srfactor-mt5-logo-200x200-9422.png", "rating": 5, "price": 0, "published": 1531329230, "popularity": 0.6804114230450174, "category": "Indicator", "votes": 2 }, { "id": 30312, "title": "Advanced Stochastic Scalper MT5", "description": "

Advanced Stochastic Scalper MT5 é um indicador profissional baseado no popular Stochastic Oscillator.

Advanced Stochastic Scalper é um oscilador com níveis dinâmicos de sobrecompra e sobrevenda, enquanto no Stochastic Oscillator padrão esses níveis são estáticos e não mudam. Isso permite que o Advanced Stochastic Scalper se adapte ao mercado em constante mudança.

Quando aparece um sinal de compra ou venda, uma seta é desenhada no gráfico e um alerta é acionado, permitindo que você abra uma posição em tempo hábil e evite ficar sentado o tempo todo diante do seu PC.

Advanced Stochastic Scalper é perfeito para negociar moedas (incluindo criptomoedas) e opções binárias.

Advanced Stochastic Scalper para o terminal MetaTrader 4: https://www.mql5.com/pt/market/product/28824

Vantagens do Advanced Stochastic Scalper

O indicador é adequado para scalping e negociação intradiária.
É possível avaliar a eficácia do indicador no histórico.
O indicador não redesenha (não recalcula); os sinais são gerados estritamente no \"fechamento da barra\".
Pode ser usado como ferramenta independente ou em conjunto com outros indicadores.
Sistema de notificações por e-mail e dispositivo móvel para novos sinais do indicador.
Possibilidade de personalizar o esquema de cores do indicador.

Recomendações para usar o Advanced Stochastic Scalper MT5

Sinal de compra: a linha do indicador cruza o nível de sobrevenda de baixo para cima. Se houver posições de venda abertas, elas devem ser fechadas. Veja a captura de tela nº2.

Sinal de venda: a linha do indicador cruza o nível de sobrecompra de cima para baixo. Se houver posições de compra abertas, elas devem ser fechadas. Veja a captura de tela nº3.

Podem ocorrer situações com vários sinais consecutivos na mesma direção. Nesse caso, abra uma posição adicional na mesma direção sem fechar a anterior. Veja a captura de tela nº4.

Várias posições devem ser fechadas somente quando surgir um sinal oposto.

Parâmetros do indicador

K – Configuração do Stochastic. Período para cálculo da linha %K do Stochastic.
D – Configuração do Stochastic. Período de média para cálculo da linha %D.
Slowing – Configuração do Stochastic. Valor de desaceleração.
Method – método de cálculo da média móvel. As seguintes opções estão disponíveis: 1 – simples, 2 – exponencial, 3 – suavizada, 4 – linear ponderada.
Line Mode – linha a ser usada para plotar o indicador: MAIN ou SIGNAL.
Alert – ativar/desativar alerta. Se true – ativado, false – desativado.
Email – ativar/desativar envio de e-mails. Se true – ativado, false – desativado.
Push – ativar/desativar envio de mensagens para o terminal móvel. Se true – ativado, false – desativado.
Arrow size – tamanho das setas no gráfico (de 1 a 7).
Buy – cor das setas de compra.
Sell – cor das setas de venda.

", "url": "https://www.mql5.com/pt/market/product/30312", "small_icon": "https://c.mql5.com/31/254/advanced-stochastic-scalper-mt5-logo-60x60-5459.png", "middle_icon": "https://c.mql5.com/31/438/advanced-stochastic-scalper-mt5-logo-140x140-3443.png", "icon": "https://c.mql5.com/31/254/advanced-stochastic-scalper-mt5-logo-200x200-4230.png", "rating": 4.099999904632568, "price": 37, "published": 1531243451, "popularity": 14.634742481490932, "category": "Indicator", "votes": 10 }, { "id": 30412, "title": "R747 BreakLevels MT5", "description": "

R747 BreakLevels is smart indicator that automatically detects Support and Resistance levels on actual market trend. \r\nStrength of levels can be easily adjusted by changing parameter LevelsStrength in range of 2 (weak levels) and 50 (strong levels).

\r\n

This indicator is accessible in EA via iCustom functions and is fully customizable by user.

\r\n

There is possibility to send Push notifications and Alerts of newly found levels.

\r\n

\r\n\r\n\r\n

\r\n

Follow this link to get all detailed information: >> \r\n LINK <<

\r\n

\r\n\r\n\r\n

Features

\r\n\r\n\r\n

Adjustable strength of levels
Can be used in EA via iCustom function
Multi time-frame
Any type of trading instrument
Alerts
Push notifications
Adjustable colors

\r\n\r\n\r\n

\r\n

Watch my other products:

\r\n

https://www.mql5.com/en/users/sevenfourseven/seller

\r\n

\r\n\r\n\r\n

Indicator Buffers:

\r\n\r\n\r\n

#0: Value[0] - Resistance level price
#0: Value[1] - Support level price

\r\n\r\n\r\n

\r\n

Parameters

\r\n\r\n\r\n

LevelsStrength: Strength of levels
DrawLevels: Enable/Disable painting level lines
ResistanceColor: Color of resistance level
SupportColor: Color of support level
ShowInfo: Enable/Disable text info of level prices
TextColor: Color of text
EnableAletrs: Enable/Disable Alerts
EnablePushNotify: Enable/Disable Push notifications
Magic: Unique magic number if using more instances on same chart

\r\n

", "url": "https://www.mql5.com/pt/market/product/30412", "small_icon": "https://c.mql5.com/31/384/r747-breaklevels-mt5-logo-60x60-6057.png", "middle_icon": "https://c.mql5.com/31/445/r747-breaklevels-mt5-logo-140x140-2552.png", "icon": "https://c.mql5.com/31/384/r747-breaklevels-mt5-logo-200x200-9962.png", "rating": 0, "price": 30, "published": 1531242859, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30216, "title": "Neural", "description": "

Neural is a professional Expert Advisor, which implements the strategy of trading using neural networks and genetic algorithms. Machine learning is widely used in various fields and is intended to replace the human brain for solving complex problems of classification and prediction. Training of a neural network is performed on a data sample (historical data). The neural network save the trouble of constantly changing the strategy, it is sufficient to simply retrain the system for the current market situation. This product combines two modern programming technologies, such as genetic algorithms and neural networks. It also applies a cyclic scheme for changing the robot parameters, which makes it possible to characterize the robot as capable of adaptation to changes in the price function.

\r\n

Information on the operation principles is described in the beginning of the discussion.

\r\n

Getting Started

\r\n

It should be noted that testing is quite complex. Since it is quite time-costly, if the neural network is retrained every hour. In practice, it is only possible to test it to a certain approximation and to see the general operation principles. Therefore, the default settings in the robot are provided only for demonstration. The settings recommended for live trading are also provided. The difference is that the neural network takes a large history sample for live operation and learns much more accurately (and therefore longer). This takes a lot of time, and certain limits are present when testing. For live trading, however, everything is simpler, as there is enough time for hourly optimization. With the medium (recommended) parameters of the neural network and sample length, training takes 5-15 minutes. In this case, the learning speed depends on the CPU power. The robot can be run on any chart with the recommended parameters. Also, if the CPU is powerful enough and when working on timeframes higher than M5, the neural network complexity and the history sample can be increased. Increasing the complexity of the system only improves predictability.

\r\n

Parameters

\r\n

TypeFilling - order filling type.
Magic - magic number.
OnComment - enable comments on the chart.
ShowLine - display the result of the genetic algorithm in the form of limes.
OnBuy - enable only buy trades.
OnSell - enable only sell trades.
LimitSpread - spread limit (no entries above this value).
Lot - lot size for market entry (overrides Risk).
Risk - lot calculation depending on the deposit.
LotExponent - ratio that defines the progressive lot increase.
LimitGrid - limitation of the grid steps.
kStepGrid - coefficient fro limiting the number of points between consecutive orders.
kTP, kSL - coefficients for stop loss and take profit.
DrawDown - the maximum drawdown, at which closing occurs (in % of a deposit).
DrawUp - the maximum profit, at which closing occurs (in % of a deposit).
ReOptimizationNN - period of re-optimization.
InputDataRSI - data from the RSI indicator.
InputDataAD - data from the AD indicator.
InputDataSAR - data from the SAR indicator.
HistoryNN - size of the history sample (in bars).
InputNN - the number of neural network inputs.
StepNN - maximum steps of the neural network.
EpochNN - maximum epochs of the neural network.
DeltaNN - training accuracy of the neural network.
LevelSignal - threshold level of the neural network, which is perceived as a signal.
kMinimumGridStepProc - filter of price noise for the genetic algorithm.
ServerTimeFilter, StartHour, StartMin, FinalHour, FinalMin, FridayOn - limit the trading time by time of the day.

", "url": "https://www.mql5.com/pt/market/product/30216", "small_icon": "https://c.mql5.com/31/253/neural-logo-60x60-7582.png", "middle_icon": "https://c.mql5.com/31/441/neural-logo-140x140-1411.png", "icon": "https://c.mql5.com/31/253/neural-logo-200x200-2422.png", "rating": 5, "price": 200, "published": 1531154555, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 30293, "title": "CheckOnlineStatus", "description": "

Check Online-Status monitors your terminal.

\r\n

If its connection to the server is interrupted for longer time, you will receive an email and/or a push notification, depending on what your settings. You can find out how long the terminal has been offline and can judge the quality of your brokers and/or the provider of your VPS after some time. Remember, the terminal manages and controls your money. Everything hangs in the air if it has no connection to the server!

\r\n

Check Online-Status displays the three important elements about the online status of the terminal:

\r\n

prev_calculated: sometimes the terminal sets prev_calculated to zero, forcing an indicator to recalculate the historical bars of the chart.
ping: Sometimes the terminal switches to another server of the broker.
connected: Displays the connection status. A '~' symbolizes an working connection, # a disconnection, that means the server is not responding by what ever reason. An '*' at the end of the line indicates that an e-mail has been sent.

\r\n

The last entry about the status is shown in the first line of their respective section. Displayed are the server time and the local time of the pc (vps).

\r\n

You can define the following input variables for the indicator:

\r\n

Number of mSec for OnTimer()[min=100] - To specify the time interval in milliseconds (mSec) after which Check Online-Status the online status is checked again. The minimum is 100 mSec, smaller values would unnecessarily overload the system. But remember that Check online status is activated by OnCalculate() (every new tick) and OnTimer().
Show Status as Comment on Chart (Yes/No) - Display of information as comment on the main chart.
Print Status Changes to the Exert-Log (Yes/No) - Print the messages to the expert log.
Minutes of Disconnection to Send Mail, 0=no Mails - E-mails are sent if the terminal is not connected to the server for longer than the entered number of minutes. 0 means that no e-mails will be sent.
Minutes of Disconnection to Send Push, 0=no Push - Push notifications are sent if the terminal is not connected to the server for longer than the entered number of minutes. 0 means that no push notifications will be sent.

\r\n

If the indicator displays the status on the chart as a comment, you see:

\r\n

In the top line you see the name of the directory of your terminal (the first 6 characters), the server of your broker, the settings and whether a connection currently exists or not.
Below that the three sections: 1) the loaded bars of the actual chart, 2) the recent ping and 3) the connection.

\r\n

If available, the last 6 events are displayed, each in one line. In the image of the chart you can see for example that the terminal lost the connection to the server (the demo server of MetaQuotes) on Saturday 30 June 2018 at 22:10:42 and was able to restore it about 3 minutes later. Both times emails and/or push notifications were sent because the interruption lasted longer than the set 1 minute.

\r\n

The Emails and the Push-Notification

\r\n

In the subject of the email you see:

\r\n

MAIL-T1 MetaQuotes-Demo, 2018.06.30 22:13 connected

\r\n

T1 is the directory (respectively its first 6 characters) of the terminal, then follows the name of the server and the time at which the email was sent.

\r\n

In the body of the email you see the last 6 lines about the connections the same way you seem them on the chart:

\r\n

~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:13:16    MetaQuotes-Demo: ..4074  *\r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:10:42     MetaQuotes-Demo: ..4074  *\r\n~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:08:51    MetaQuotes-Demo: ..4074  \r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:08:03     MetaQuotes-Demo: ..4074\r\n~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:01:50    MetaQuotes-Demo: ..4074  \r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:01:45     MetaQuotes-Demo: ..4074

\r\n

Push notifications have a subject line, but, due to the limitation to 255 characters, only the latest status message!

\r\n

After a push notification has been sent, the next one can only be sent 1 minute later. This is to prevent too many push notification being sent.

\r\n

I hope it helps you!

\r\n

PS.: Please note further information at the beginning of the discussion!

", "url": "https://www.mql5.com/pt/market/product/30293", "small_icon": "https://c.mql5.com/31/254/checkonlinestatus-logo-60x60-6074.png", "middle_icon": "https://c.mql5.com/31/442/checkonlinestatus-logo-140x140-9932.png", "icon": "https://c.mql5.com/31/254/checkonlinestatus-logo-200x200-7096.png", "rating": 0, "price": 30, "published": 1531154542, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30353, "title": "Triton", "description": "This robot is designed for major currency pairs and trades three strategies. 1- swing, 2- gap, 3- support and resistance. It uses the algorithm for analysis of price data and finds the best parameters. Trades are filtered by results of analysis of daily and monthly chart for the last 12 periods.

The Swing strategy can be used on TF H1 or M30, or also on M15 or M5 (more trades but higher risk)
The Gap strategy is recommended on M30 or H1
The Sup./Res. strategy is recommended on M30, H1 or H4

Default settings can be used for EURUSD, GBPUSD and USDJPY on the M30.

Do not use this EA with a broker who averages multiple positions into one position !

MT4 version:https://www.mql5.com/en/market/product/44133

Settings

UseSwing - Trading the Swing strategy
Swing_TimeFrame - Time Frame for Swing
UseSR - Trading the Support and Resistance strategy
SR_TimeFrame - Time Frame for SR
UseGap - Trading Gap strategy
Gap_TimeFrame - Time Frame for Gap
MinGap - Minimum gap size in points
Start trading, hour - you can set trading time
Start trading, minute - you can set trading time
End trading, hour - you can set trading time
End trading, minute - you can set trading time
Start pause, hour - you can set pause / no trading
Start pause, minute - you can set pause / no trading
End pause, hour - you can set pause / no trading
End pause, minute - you can set pause / no trading
Use Close time - Turns on Close time function
Close time, hour - Close all trades at this time each day, hour
Close time, minute - Close all trades at this time each day, minute
Max.spread size - maximum allowed spread size
Max.total of trades - maximum number of open trades
Execution Order Type - order execution type (contact your broker if necessary).

Trades BUY - allows trading long / BUY
Trades SELL - allows trading short / SELL

:::::::: Money management::::::::

Lot - primary Lot size
AutoLot - automatic Lot calculation based on account size
AutoLot Balance % - Percentage of account balance for AutoLot calculation.If you use this EA on 3 pairs, set it to 33%, etc.
Min. distance of next trade - in points
Lot x - multiplication Lot of next trade
TP all trades - when more than one trade is opened, all closes in this profit in points
Multipair closing - allows closing of trades on other markets (loss vs. profit)
TP - Target profit in points
SL - Stop Loss in points
AllSL - StopLoss in the points of all trades together, 0 is off
AllClose by DD% - Set the maximum allowed drawdown for this EA (loss in% of balance). Then all trades of this EA will be closed.
DD alert % - Displays a warning when this drawdown.
SafeClosing - if the trade is in a loss for a long time, it will be closed when the profit is 0 + commission + swap.(recommended)
TP1 Lot% - closes part of a trade in profit, set % of Lot
TP1 - closes part of a trade in this profit of points
SL1 Lot% - closes part of a trade in loss, set % of Lot
SL1 - closes part of a trade in this loss of points
SL on BE - in this profit (in points) moves SL to the opening price of the trade
SL on BE + - \"SL on BE\" function moves SL to this profit in points
TrailingSL start profit - in this profit in points begin to move the SL
TrailingSL distance - moves SL at this distance from the current price
TrailingSL step - moves SL after these steps, in points
TrailingTP start loss - in this loss in points begin to move the TP
TrailingTP distance - moves TP at this distance from the current price
TrailingTP step - moves TP after these steps, in points
Magic - the identification number of trades
comment - a comment to trade

Example for AutoLot function:

Settings

Lot = 0.02
AutoLot = 500
Your account balance is 1000
The trade size will be 0.04 Lot
Your account balance is 1500
The trade size will be 0.06 Lot
Your account balance is 2000
The trade size will be 0.08 Lot

Example for Multipair closing function:

It tracks trades of the whole account, which have same the first two numbers of the Magic numbers.

Market situation:

EURUSD - Magic 5511 - trade BUY is loss 100 points
GBPUSD - Magic 5522 - trade SELL is profit 130 points

The first two numbers of the Magic numbers are the same (55), so both trades will be closed at a total profit of 30 points (setting TP all trades = 30)

", "url": "https://www.mql5.com/pt/market/product/30353", "small_icon": "https://c.mql5.com/31/254/triton-logo-60x60-7551.png", "middle_icon": "https://c.mql5.com/31/447/triton-logo-140x140-6483.png", "icon": "https://c.mql5.com/31/254/triton-logo-200x200-6738.png", "rating": 5, "price": 490, "published": 1531154365, "popularity": 0, "category": "Expert", "votes": 4 }, { "id": 30264, "title": "Ultimate Double Top Bottom Scanner MT5 FREE", "description": "

This indicator scans for you up to 15 trading instruments and up to 21 time frames for occurrences of the high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

For double tops with fake breakouts the highest price of the right shoulder must be higher than the left shoulder. For double bottoms with fake breakouts the lowest price of the right leg must be lower than the left leg.

\r\n

These special Double Tops/Bottoms are created by the smart money to accumulate its own position size. With the fake breakout the smart money traps as much traders on the wrong side of the market as possible. Then the smart money reverses the direction very sharply. The trapped traders are in panic and exit their position or even reverse their position. This makes the reversal very strong and profitable. The indicator detects exactly these games of the smart money and therefore gives you high probability entry signals.

\r\n

This FREE Version of the Scanner scans only EURUSD and GBPUSD. The full version of the scanner can be found here: Ultimate Double Top Bottom Reversal Scanner

\r\n

Please read also the blog post \"Professional Trading With Double Tops/Bottoms And Divergences!\" which explains the concepts behind the ULTIMATE Double Top/Bottom indicator and how you can use a professional top-down approach.

\r\n

You can get alerts via MetaTrader 5, email and push notifications at the moment when a signal occurs on any timeframe and any trading instrument you have configured.

\r\n

You need to install this indicator on only one single chart. The indicator then scans up to 15 instruments and 21 time frames automatically for you! Of course, if you want to scan more than 15 instruments then you can add the scanner to another chart and scan more trading instruments.

\r\n

Important

\r\n

The purpose of this indicator is to alert signals so that you will be able to trade these signals even with a normal day job. Therefore, on live charts you will only see the dashboard view as shown in the video. This indicator will NOT draw signals on live charts.

\r\n

If you need the signals visible on live charts, then you can additionally purchase the Ultimate Double Top Bottom Reversal Indicator

\r\n

Parameters

\r\n

alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\" signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\" signals for short entries
alertsViaMT5: True = Yes, False = No - if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email
alertsViaPush: True = Yes, False = No - if true, then the indicator gives alerts direct to your mobile phone
alertsM1 - alertsMN1: True = Yes, False = No - if true, then the indicator searches for \"Double Top/Bottom\" signals on the appropriate time frame e.g. M1, M2 and so on. You can define which time frames will be checked.
templateName: - if you press a button on the chart (which contains the name of an instrument), then the appropriate chart will open and a template with the specified name will be attached
checkEveryXSeconds - every X seconds, the indicator checks the next instrument/timeframe for the occurrence of a \"Double Top/Bottom\" signal
i1-i2 - EURUSD and GBPUSD which will be monitored/checked for the occurrence of a \"Double Top/Bottom\" signal

", "url": "https://www.mql5.com/pt/market/product/30264", "small_icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-free-logo-60x60-1505.png", "middle_icon": "https://c.mql5.com/31/446/ultimate-double-top-bottom-scanner-mt5-free-logo-140x140-2911.png", "icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-free-logo-200x200-1619.png", "rating": 1, "price": 0, "published": 1530896449, "popularity": 0.5399976539216048, "category": "Indicator", "votes": 2 }, { "id": 30265, "title": "Ultimate Double Top Bottom Scanner MT5", "description": "

This indicator scans for you up to 15 trading instruments and up to 21 time frames for occurrences of the high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

You can get alerts via MetaTrader 5, email and push notifications at the moment when a signal occurs on any timeframe and any trading instrument you have configured.

\r\n

Important

\r\n

If you need the signals visible on live charts, then you can additionally purchase the Ultimate Double Top Bottom Reversal Indicator

\r\n

Parameters

\r\n

alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\" signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\" signals for short entries
alertsViaMT5: True = Yes, False = No - if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email
alertsViaPush: True = Yes, False = No - if true, then the indicator gives alerts direct to your mobile phone
alertsM1 - alertsMN1: True = Yes, False = No - if true, then the indicator searches for \"Double Top/Bottom\" signals on the appropriate time frame e.g. M1, M2 and so on. You can define which time frames will be checked.
templateName: - if you press a button on the chart (which contains the name of an instrument), then the appropriate chart will open and a template with the specified name will be attached
checkEveryXSeconds - every X seconds, the indicator checks the next instrument/timeframe for the occurrence of a \"Double Top/Bottom\" signal
i1-i15 - define up to 15 instruments, which will be monitored/checked for the occurrence of a \"Double Top/Bottom\" signal

", "url": "https://www.mql5.com/pt/market/product/30265", "small_icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-logo-60x60-6832.png", "middle_icon": "https://c.mql5.com/31/441/ultimate-double-top-bottom-scanner-mt5-logo-140x140-8144.png", "icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-logo-200x200-6556.png", "rating": 2, "price": 119, "published": 1530896442, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30253, "title": "Fractals true extremums MT5", "description": "

Fractals true extremums is a modification of the Fractals indicator. The indicator sorts out weak fractals leaving only the ones that are significant for searching the chart extreme points. The sorting is performed during fractals construction. The old data does not change. Only the last value can change (just like in the standard Fractals indicator). The indicator can show lines indicating Fractals from higher timeframes.

\r\n

The product can be used by EAs for comparing price extreme points on charts of various instruments, as well as applied instead of the standard Fractals indicator for obtaining more reliable entry points and support & resistance levels.

\r\n

The standard Fractals indicator generates a large number of extreme points. The two methods are usually used to sort them:

\r\n

Fractals from older timeframes (where there is the same issue of potential false signals).
Methods of smoothing fractals by calculating them on 7, 9 and more standard bars rather than on 5 ones. However, this method may skip a really important fractal and strongly depends on the current situation on the chart. In other words, it may be more feasible to use 5 bars on some part of the chart, 9 bars on some other one, etc.

\r\n

Fractals true extremums indicator applies the principle of the intellectual sorting of fractals. It requires no selection of certain settings from users in order to fit the indicator into the chart. On upward trends, the indicator mainly shows the upper fractals formed above the previous ones until the upward trend does not end. On downward trends, the situation is inversed. If the indicator assumes the presence of a flat, it sorts out most of the fractals except the ones that form new highs and lows.

\r\n

Параметры

\r\n

To wait bar closing - true - only show Fractals on closed bars. Fractals of the current bar and higher timeframes will be shown one bar later, but will not be redrawn. false - normal mode for showing fractals (the last one can be redrawn in this case).
TIMEFRAME_1 - choose timeframe for drawing level 1.
TIMEFRAME_2 - choose timeframe for drawing level 2.
TIMEFRAME_3 - choose timeframe for drawing level 3.

\r\n

A higher timeframe can be selected in parameters TIMEFRAME_1,2,3. These values will be shown as lines on the chart. The lines form support and resistance levels. If any of the lines is not used, set it to the current or lower timeframe.

\r\n

The indicator works best on the charts without price gaps – on highly liquid instruments or older timeframes.

\r\n

The terminal version 1861 or higher is required for the indicator operation.

", "url": "https://www.mql5.com/pt/market/product/30253", "small_icon": "https://c.mql5.com/31/253/fractals-true-extremums-mt5-logo-60x60-6264.png", "middle_icon": "https://c.mql5.com/31/439/fractals-true-extremums-mt5-logo-140x140-2103.png", "icon": "https://c.mql5.com/31/253/fractals-true-extremums-mt5-logo-200x200-1674.png", "rating": 0, "price": 0, "published": 1530896180, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30258, "title": "AQ RiskOptimizer MT5", "description": "

Risk Optimizer is the absolute solution for applying risk management \r\non your account. Bad risk management is the main reason that causes \r\ntraders to lose money.

\r\n

Risk Optimizer calculates and suggests the correct lot size for each \r\nposition according to your personal, customized risk profile. You can \r\ngive directly your preferred risk as percentage (%) for each position or\r\n you can trust our algorithms to calculate and optimize according to \r\nyour risk category selection.

\r\n

But it is not only that! Select Stop Loss as a price level or trust \r\nour machine learning algorithms that calculate Stop Loss for you, \r\ndepending on market volatility or market support/resistance levels.

\r\n

Similarly, set Take Profit as a price level or let Risk Optimizer calculate it according to your Risk/Reward ratio selection.

\r\n

As long as you have decided on the direction of your position, the \r\nlot size, Stop Loss and Take profit, Risk Optimizer opens the position \r\nonly if you press the Execute button. Save time and be accurate!

\r\n

Risk Optimizer shows on a textbox all the opened positions of your \r\naccount and indicates your current risk by warning you with a specific \r\nmessage.

\r\n

Success probability at the bottom right of the panel indicates the quantified probability for the position that you want to open.

\r\n

Selections from the panel

\r\n

PositionType – BUY or SELL.
RiskProfile – LOW_RISK, MEDIUM_RISK, HIGH_RISK or \r\nMANUAL_RISK. For the first three selections, Risk Optimizer decides the \r\nappropriate lot size according to your account balance and the selected \r\nRisk Profile.
RiskPercent – if the above selection (RiskProfile) is \r\nMANUAL_RISK, set here the percentage (%) of your capital to be risked \r\nfor the position.
StopLossSelection – PRICE_SL, VOLATILITY or \r\nSUPPORT_RESISTANCE. For VOLATILITY selection, Risk Optimizer calculates \r\nStop Loss based on machine learning techniques that measure and predict \r\nmarket volatility. For SUPPORT_RESISTANCE selection, Risk Optimizer \r\ncalculates Stop Loss based on our proprietary Supports/Resistance \r\nindicator.
StopLossLevel – if the above selection (StopLossSelection) is PRICE_SL, set here the price for your selected Stop Loss level.
TakeProfitSelection – PRICE_TP or RISK_REWARD_RATIO. For \r\nRISK_REWARD_RATIO selection, Take Profit will be calculated according to\r\n the Risk Reward ratio that you will provide.
RiskRewardRatio – Risk Reward ratio (e.g. 1:2 means that \r\nStop Loss will be half of the Take Profit) if you have selected \r\nRISK_REWARD_RATIO for TakeProfitSelection parameter.
TakeProfitLevel – if your selection at TakeProfitSelection parameter is PRICE_TP, set here the price for your selected Take Profit level.

\r\n

Parameter

\r\n

MagicNumber – unique number allowing you to distinguish positions opened from Risk Optimizer. Use any number you like, up to 9 digits.

", "url": "https://www.mql5.com/pt/market/product/30258", "small_icon": "https://c.mql5.com/31/253/aq-riskoptimizer-mt5-logo-60x60-2974.png", "middle_icon": "https://c.mql5.com/31/439/aq-riskoptimizer-mt5-logo-140x140-2822.png", "icon": "https://c.mql5.com/31/253/aq-riskoptimizer-mt5-logo-200x200-7812.png", "rating": 4, "price": 0, "published": 1530896081, "popularity": 0.11938415313462328, "category": "Utility", "votes": 1 }, { "id": 30223, "title": "BB Trend Indicator", "description": "

BBTrend is a relatively new indicator developed by John Bollinger to work with Bollinger Bands™. It is one of only a few indicators that can signal both strength and direction making it a very valuable tool for traders.

\r\n

Calculations

\r\n

The calculations are fairly simple. The default periods of 20 and 50 are shown, but these can be changed through the parameters.

\r\n

Lower = MathAbs(lowerBB(20) - lowerBB(50))

\r\n

Upper = MathAbs(upperBB(20) - upperBB(50))

\r\n

BBTrend = (lower - upper) / middleBB(20)

\r\n

Interpretation

\r\n

Bullish trend = BBTrend above zero
Bearish trend = BBTrend below zero

\r\n

The degree above or below zero determines the strength or momentum behind the trend.

\r\n

Parameters

\r\n

Shorter Bands Period – the shorter period for the Bollinger Bands used in the calculation.
Longer Bands Period – the longer period for the Bollinger Bands used in the calculation.
iBands Shift – “shift” used by both the longer and shorter Bollinger Bands (iBands) calculations.
iBands Deviation – “deviation” used by both the longer and shorter Bollinger Bands (iBands) calculations.

", "url": "https://www.mql5.com/pt/market/product/30223", "small_icon": "https://c.mql5.com/31/253/bb-trend-indicator-logo-60x60-3444.png", "middle_icon": "https://c.mql5.com/31/446/bb-trend-indicator-logo-140x140-7861.png", "icon": "https://c.mql5.com/31/253/bb-trend-indicator-logo-200x200-8048.png", "rating": 0, "price": 0, "published": 1530811173, "popularity": 0.4442067504863088, "category": "Indicator", "votes": 0 }, { "id": 30082, "title": "DTN EA For XAU MT5", "description": "

DTN EA MT5 is a fully automated Expert Advisor after research and development in a long time. It uses TREND to open orders, and uses HEDGING STRATEGY to protect your balance. So this stragety will reduce risk, protect your profit and your balance.
It's only suitable with XAUUSD (GOLD) chart.

\r\n

Indicator parameters

\r\n

Type Of First Order - BUY or SELL - The EA will open the first Order with BUY or SELL type.
Magic Number - default is 168. Remember change Magic Number before running. The EA will use it to determine orders which was opened by EA.
Stop EA When Profit >0 - Default is \"No\". If you want to change volume of orders or balance, you need to change it to \"Yes\". The EA will stop when having a profit order.
First Volume - The EA will open first order with lot = First Volume . Please set it follow \" How to use\" below.

\r\n

How to use

\r\n

It has been setup with optimize parameters so it's very EASY to run. You only attach it into XAUUSD chart (with any timeframe) and wait it to open orders.
Min balance: 10000$ or 100$ for cent account.
No need VPS if your ping < 500ms.
No need to close the robot during news releases
Choose 5 digits brokers
Choose Leverage >= 1:500
Change \"Magic number\" before running EA
Do not run terminal with other expert advisors
If you run in cent account, please set \"first volume\" parameter as follows:

100$ - 10000 cent - 0.01 lot
1000$ - 100000 cent - 0.1 lot
1100$- 110000 cent - 0.11 lot
...

If you want stopping ea to change \"first volume\" or your balance, first, notice to change \" stop when win\" to \" Yes\", ea will stop when having the win order and you can change \"first volume\". After that, change \"stop when win \" to \" No\", the ea will run normally.

\r\n

Backtest

\r\n

It has been run backtest in a long time with parameters:

\r\n

From 04.01.2012 to 16.06.2018
XAUUSD
Random delay
Every tick based in real ticks
Leverage 1:500
History Quality 100%

\r\n

Make sure to setup like above to recieve similar result

\r\n

If you have bought the product and/or you have any questions send me a private message. Also contact me for product support if you have purchased it.

", "url": "https://www.mql5.com/pt/market/product/30082", "small_icon": "https://c.mql5.com/31/252/dtn-ea-for-xau-mt5-logo-60x60-2335.png", "middle_icon": "https://c.mql5.com/31/438/dtn-ea-for-xau-mt5-logo-140x140-1246.png", "icon": "https://c.mql5.com/31/252/dtn-ea-for-xau-mt5-logo-200x200-9917.png", "rating": 0, "price": 0, "published": 1530785294, "popularity": 0.7518769725187203, "category": "Expert", "votes": 0 }, { "id": 30212, "title": "CrossCorrelation", "description": "

The indicator is designed to calculate the correlation between major pairs and display cross-pair of overbought or oversold labels on the price chart.

The idea is that strong divergences of major pairs lead to an exit from the \"equilibrium\" of the corresponding cross pairs. With sufficiently large divergences, which are displayed by the indicator, the cross-pair is usually corrected by entering the \"equilibrium\". For example: when working on EURAUD pair, the difference for the period specified in the settings for EURUSD and AUDUSD pairs is calculated and, if the difference exceeds the set threshold, the corresponding label is displayed on the chart. For major pairs, labels are displayed when the price changes by the set threshold.

\r\n

Red labels are displayed for the overbought zone and blue labels - for the oversold zone.

The indicator does not display (not always) immediate changes in the direction of the price movement, which should be confirmed by other methods (for example: reversal figures, margin levels).

\r\n

Parameters

bars to calc - number of bars to calculate the correlation (default is 240)
Levels (%) - percentage of major pairs divergence, above which the corresponding labels are displayed on the chart (default is 2).

", "url": "https://www.mql5.com/pt/market/product/30212", "small_icon": "https://c.mql5.com/31/253/crosscorrelation-logo-60x60-5922.png", "middle_icon": "https://c.mql5.com/31/446/crosscorrelation-logo-140x140-7159.png", "icon": "https://c.mql5.com/31/253/crosscorrelation-logo-200x200-4827.png", "rating": 1, "price": 30, "published": 1530724710, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 29848, "title": "TrendStar", "description": "

This indicator is designed to help traders find the market entry and exit points. The indicator generates signals in the form of arrows, which is a simple and intuitive for use in trading. In spite of apparent simplicity of the indicator, it has complicated analytic algorithms which determine entry and exit points. Its operation is based on moving averages, RSI, candlestick patterns, as well as certain original developments. Open a Buy position when an upward arrow appears, and a Sell position when a downward arrow appears. The indicator generates timely entry signals on the current candle.

\r\n

Indicator input parameters:

\r\n

Strength - indicator period
Sound - enable/disable alerts
MobileAlert - enable/disable push notifications
EmailAlert - enable/disable email alerts

\r\n

The indicator does not repaint its values. Arrows always stay where they have appeared.

", "url": "https://www.mql5.com/pt/market/product/29848", "small_icon": "https://c.mql5.com/31/256/trendstar-logo-60x60-7447.png", "middle_icon": "https://c.mql5.com/31/440/trendstar-logo-140x140-3477.png", "icon": "https://c.mql5.com/31/256/trendstar-logo-200x200-1633.png", "rating": 0, "price": 64, "published": 1530639931, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30221, "title": "Signal Noise Indicator", "description": "

O indicator Signal Noise é um oscilador, não parametrizado, gerado pelos ruídos máximo, mínimo e de fechamento para cada barra.

\r\n

Parâmetros de entrada:

\r\n

Período: é o período utilizado como referência pelo filtro passa baixa na detecção do sinal.

\r\n

Valores:

\r\n

High Noise: máximo ruído de alta;
Power High Noise: demonstra a força do sinal de alta, quando o menor ruído da barra ocorre na mesma direção do sinal;
Low Noise: máximo ruído de baixa;
Power Low Noise: demonstra a força do sinal de baixa, quando o menor ruído da barra ocorre na mesma direção do sinal;
Close Noise: valor do ruído no fechamento da barra.

\r\n

", "url": "https://www.mql5.com/pt/market/product/30221", "small_icon": "https://c.mql5.com/31/253/signal-noise-indicator-logo-60x60-9288.png", "middle_icon": "https://c.mql5.com/31/440/signal-noise-indicator-logo-140x140-5606.png", "icon": "https://c.mql5.com/31/253/signal-noise-indicator-logo-200x200-6530.png", "rating": 0, "price": 30, "published": 1530635907, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30162, "title": "PZ Multi Oscillator MT5", "description": "

O Multi-Oscillator é o melhor canivete suíço para negociação em várias moedas e prazos múltiplos. Ele plota o oscilador desejado para muitos pares de moedas e / ou prazos em um único gráfico. Pode ser usado para negociar arbitragem estatística, como uma ferramenta de triagem de mercado ou como um indicador refinado de múltiplos prazos. [ Guia de instalação | Guia de atualização | Solução de problemas | FAQ | Todos os produtos ]

Fácil interpretação e configuração
Suporta 16 indicadores conhecidos
Pode exibir até 12 pares de moedas no gráfico
Ele também pode exibir vários prazos de um único instrumento
Símbolos e prazos são personalizáveis nas entradas
Configurações personalizáveis do indicador do oscilador
Cores e tamanhos personalizáveis

Para oferecer uma ampla perspectiva de mercado, o indicador pode ser carregado várias vezes no mesmo gráfico usando diferentes osciladores, sem interferência. O indicador suporta os seguintes osciladores:

RSI
CCI
ADX
ATR
MACD
OSMA
DeMarker
Estocástico
Momentum
Índice de força
Índice de fluxo monetário
Volume da balança
Awesome Oscillator
Índice de Vigor Relativo
Oscilador do acelerador
Intervalo percentual de Williams

Este indicador oferece um potencial incomparável, porque cada buffer pode plotar a combinação desejada de oscilador, símbolo e período de tempo, não relacionada a outros buffers ou ao período de tempo local do gráfico. Você pode criar um modelo de gráfico para cada uma de suas estratégias com várias moedas e prazos, independentemente de sua aparente complexidade.

As capturas de tela a seguir ilustram os princípios básicos do indicador, bem como alguns exemplos de casos de uso, desde encontrar os pares de moedas mais interessantes de um conjunto até arbitragem estatística de negociação e exemplos de triagem de mercado.

Configurações

Ao carregar o indicador para qualquer gráfico, você será presenteado com um conjunto de opções como parâmetros de entrada. Não se desespere se você acha que eles são muitos, porque os parâmetros são agrupados em blocos auto-explicativos. Isto é o que cada bloco de parâmetros faz.

Configurações do indicador - Escolha o oscilador a ser exibido e a quantidade de barras a serem avaliadas quando o indicador for carregado no gráfico. Avaliar menos barras no carregamento significa que o indicador carregará mais rapidamente.
Configurações de símbolo - Digite os símbolos que você deseja exibir em cada buffer de indicador, conforme oferecido pelo seu corretor no seu terminal Metatrader. Você deve digitar pelo menos um símbolo e no máximo 12. Deixe em branco os buffers que não deseja usar. Na maioria das vezes, você definirá um símbolo diferente para cada buffer, a menos que deseje rastrear um único indicador em todos os períodos no mesmo símbolo; nesse caso, você precisará digitar o mesmo símbolo em todos os buffers.
Configurações do período de tempo - Escolha o período de cada buffer. Se você deseja que o oscilador mude com o período do gráfico, deixe o valor padrão atual . Por outro lado, se você deseja exibir um período fixo, independentemente do período local do gráfico, você deve selecioná-lo.
Configurações de entrada - configurações de indicador desejadas para todos os osciladores envolvidos.

Período RSI
Período CCI
Período ADX
Período ATR
Período MACD
Período OSMA
Período DeMarker
Período estocástico
Período de impulso
Período do índice de força
Período do Índice de Fluxo Monetário
Período de volume no balanço
Período impressionante do oscilador
Período do Índice de Vigor Relativo
Oscilador do acelerador
Intervalo percentual de Williams

Configurações de desenho - Escolha cores e tamanhos de linha das divergências.

Autor

Arturo López Pérez, investidor e especulador privado, engenheiro de software e fundador da Point Zero Trading Solutions.

", "url": "https://www.mql5.com/pt/market/product/30162", "small_icon": "https://c.mql5.com/31/252/pz-multi-oscillator-mt5-logo-60x60-1869.png", "middle_icon": "https://c.mql5.com/31/438/pz-multi-oscillator-mt5-logo-140x140-9875.png", "icon": "https://c.mql5.com/31/252/pz-multi-oscillator-mt5-logo-200x200-7357.png", "rating": 0, "price": 30, "published": 1530553261, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29871, "title": "AirShip", "description": "

The AirShip indicator can help you to confirm the trend. The red dots mean uptrend, and the green dots mean downtrend. The AirShip indicator provides open and close positions signals when reaching overbought or oversold levels. It has a smart algorithm that detects the trend changes. If the trend reached the end of phase, the yellow dots will send you the notification. The AirShip indicator not only draw the red trend lines and the yellow trend lines using a multicriteria strength engine, but also combines it with multitimeframe trend analysis.

\r\n

The AirShip indicator is very easy to use. It does not redraw its signals.

\r\n

How to Trade

\r\n

You can trade in following modes:

\r\n

The distance between the red line and the yellow line is too large. The greater the difference between the two lines, the stronger the trend changes of yellow line.
Looking for the divergences in overbought and oversold levels.
If red line is under 25 and then crosses this level upwards, and the price is already above its simple moving average, this is a sign for the beginning of a new ascending trend.
If red line is above 75 and then crosses this level downwards, and the price is already below its simple moving average, this is a sign for the beginning of a new descending trend.
You can trade any timeframe you want.

\r\n

Indicator Parameters

\r\n

Trendcolordots - the best dots filter. The higher the value, the more \"noise\" in signals of trendcolordots. The dots will different.

Trendcolor dots 1 - the trend of long period.
Trendcolor dots 2 - the trend of Middle period.
Trendcolor dots 3 - the trend of Short period.
no color dots - hide the dots.

", "url": "https://www.mql5.com/pt/market/product/29871", "small_icon": "https://c.mql5.com/31/249/airship-logo-60x60-3697.png", "middle_icon": "https://c.mql5.com/31/445/airship-logo-140x140-4963.png", "icon": "https://c.mql5.com/31/249/airship-logo-200x200-2478.png", "rating": 0, "price": 218, "published": 1530293265, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30141, "title": "Fractals Direction ST Patterns MT5", "description": "

Fractals Direction ST Patterns MT5 is a modification of Bill Williams' Fractals indicator, which allows you to specify any number of bars for finding a fractal. In the settings, it is also possible to set the number of points for determining the trend direction. The upward direction is determined if the last upper fractal is higher than the penultimate upper fractal. The downward direction is determined if the last lower fractal is lower than the penultimate lower fractal.

This simple indicator corresponds to the parameters of ST Patterns Strategy (https://stpatterns.com/). ST Patterns are recognized and built on the basis of the fact of breaking through the fractal levels and the distance to the Target. ST Patterns remove the uncertainty from the market and simplify the work of the trader.

The fractal consists of a two sets of arrows - up (upper fractals) and down (lower fractals). Each fractal satisfies the following conditions:

Upper fractal - maximum (high) of a signal bar exceeds or is equal to maximums of all bars from the range to the left and to the right;
Lower fractal - minimum (low) of a signal bar is less or equal to minimums of all bars from the range to the left and to the right.

Arrows with a slope are used to indicate the direction of the trend.

Input parameters

Bars around - the number of bars before and after the central bar.
Arrow offset - offset of the array from the bar's High/Low in points.
Trend detect offset - the number of points for determining the trend direction.

You can set the arrows' color and size separately for upper and lower fractals on Colors tab.

", "url": "https://www.mql5.com/pt/market/product/30141", "small_icon": "https://c.mql5.com/31/252/fractals-direction-st-patterns-mt5-logo-60x60-9811.png", "middle_icon": "https://c.mql5.com/31/447/fractals-direction-st-patterns-mt5-logo-140x140-9978.png", "icon": "https://c.mql5.com/31/252/fractals-direction-st-patterns-mt5-logo-200x200-7749.png", "rating": 0, "price": 0, "published": 1530293246, "popularity": 0.08329232779154552, "category": "Indicator", "votes": 0 }, { "id": 29911, "title": "SeasonalEA", "description": "

SeasonalEA is an Expert Advisor for MetaTrader 5 that allows a trader to buy (or sell) symbols with timing rules.

\r\n

For example, the trader can add rules to buy on Monday at 10:00 am and sell on Tuesday at 5:00 pm.

\r\n

This software is useful for traders that:

\r\n

study seasonal patterns on Forex and CFD
study intraday seasonals rules
study timing trading rules

\r\n

This EA accepts up to 6 symbols rules (but if a trader wants to trade only one pair, they can do it simply by setting other lots to zero).

\r\n

Inputs

\r\n

Timing settings:

\r\n

firstInstrument = \"symbol1\"; --> first instrument to trade, like EURUSD

trader can choose other symbols on secondInstrument, thirdInstrument, fourthInstrument, fithInstrument and sixInstrument inputs.

firstlots=0.1

trader can choose other lots on secondlots, thirdlots, fourthlots, fithlots and sixlots inputs.

first_Type_Operation=\"BUY\"; a trader can modify also with \"SELL\"

\r\n

Traders can choose the other direction of trades on second_Type_Operation, third_Type_Operation, fourth_Type_Operation, fith_Type_Operation and six_Type_Operation inputs.

\r\n

Timing trading inputs that traders can modify for each necessary symbol are as follows:

\r\n

Entry_Day1=3 - day to enter

1 is Monday
2 is Tuesday
3 is Wednesday
4 is Thursday
5 is Friday

Entry_time1=12 - hour to enter
Exit_Day1=5 - day to exit

1 is Monday to 5 that is Friday

Exit_time1=22 - time to exit

\r\n

CFD trading, comments, magic numbers, profit level, max opened trades settings:

\r\n

CFDtrading=false - turn in True if a trader uses CFD instead of Forex pairs;
comment = \"SeasonalEA EA 2018\";
sProfit=\"--- Profit in money\";
Profit=199;
maxsell = 15; --> max number of short trades
maxbuy = 15; --> max number of long trades
input int magic2 = 3456;

\r\n

Pop-up and push alert settings:

\r\n

PopUpAlert= false; // pop-up alert
PushAlert=true; // push notifications alert

\r\n

HIGH RISK WARNING: Foreign exchange trading carries a high level of risk that may not be suitable for all investors. Leverage creates additional risk and loss exposure. Before you decide to trade foreign exchange, carefully consider your investment objectives, experience level and risk tolerance. You could lose some or all of your initial investment; do not invest money that you cannot afford to lose. Educate yourself on the risks associated with foreign exchange trading, and seek advice from an independent financial or tax advisor if you have any questions. Any data and information is provided 'as is' solely for informational purposes, and is not intended for trading purposes or advice.

", "url": "https://www.mql5.com/pt/market/product/29911", "small_icon": "https://c.mql5.com/31/251/seasonalea-logo-60x60-4065.png", "middle_icon": "https://c.mql5.com/31/438/seasonalea-logo-140x140-6737.png", "icon": "https://c.mql5.com/31/251/seasonalea-logo-200x200-6940.png", "rating": 0, "price": 0, "published": 1530293185, "popularity": 0.09502619888118835, "category": "Expert", "votes": 0 }, { "id": 30104, "title": "Pointer synchronization MT5", "description": "

Pointer synchronization MT5 is an indicator with which the pointer can be synchronized in all the visible graphics of the terminal. It shows a cross cursor on all the visible graphics of the terminal, in position relative to the cursor of the active graph.
To activate the indicator, simply press the button that appears in one of the corners of the chart once the indicator is added to the chart.
To deactivate the indicator, simply press the button again. Once the indicator has been deactivated, the crossed lines of all the charts will also disappear.
The color of the button and lines, the style of the lines, the width of the lines and the corner to display the button can be modified in the parameters.

It can be used together with Expert Advisors and other panels, such as Controller without limit MT5
MT4 version

Parameters

Button color: Set the colour of the button used to turn the indicator activate and deactivate.
Horizontal line and vertical line color: Set the color of the lines.
Informational text color: Set the colour of the informational text.
Turn off the indicator on one or more charts: Activate this parameter if you want to deactivate the indicator on one or more charts.
Informational text size: Set the size of the informational text.
Lines width: Set the width of the lines.
Line style: Set the style of the lines.
Button corner: Set the corner where you want the button to appear.
Informative: Informational parameter.

", "url": "https://www.mql5.com/pt/market/product/30104", "small_icon": "https://c.mql5.com/31/251/pointer-synchronization-mt5-logo-60x60-5643.png", "middle_icon": "https://c.mql5.com/31/440/pointer-synchronization-mt5-logo-140x140-7714.png", "icon": "https://c.mql5.com/31/251/pointer-synchronization-mt5-logo-200x200-1531.png", "rating": 3, "price": 30, "published": 1530204984, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 30129, "title": "ClassicTrader", "description": "

ClassicTrader is a universal and fully automatic Expert Advisor developed specifically for real Forex trading, which does not require any strict conditions or a specific broker. The minimum deposit is $100! The important advantage is frequent trading of large lots, which allows you to make additional profit on spread in partnership programs.

\r\n

You can run the robot on any symbols. All parameters can be optimized for any trading style. For other instruments, select the parameters on 2-3 year period with a forward period of 6 months before trading. Do not optimize parameters on a short period of time, this will lead to overfitting. If you want to globally optimize all parameters, use Open prices only first, since the work will be slow on all ticks or control points. The next refinement optimization can be made redundant by several parameters (kStepGrid [0.05.. 0.5], MinClose [0.01.. 0.7], SL and TP [100.. 250]).

\r\n

All tests on the screenshots are passed with a single setting - the one set by default but on different time intervals. Testing is performed with the minimum deposit of $100. Therefore, the drawdown may be somewhat larger than if you test with a deposit of $1000 or $10 000.

\r\n

The default settings are as follows: timeframe - M30, symbol - EURUSD, leverage - 1:100, minimum deposit - 100$.

\r\n

Features

\r\n

works with any broker;
the system can run with brokers providing floating spread;
the lesser the spread, the better - this applies to any trading system;
no need for fast VPS;
works on netting accounts;
applies loss limiting stop levels - loss limitation level is low;
uses only the best features from various systems, such as martingale, hedging, etc. SL and TP are always present;
good test results on various time intervals;
excellent results when tested in different ways;
no need to disable the robot during news;
does not require exceptional execution.

\r\n

ClassicTrader operation is based on one well-known strategy. The strategy focuses on a special trading algorithm and a limiting channel. The regression indicator is applied to form a trading channel. The number of opened orders can be adjusted in the parameters, by default there are two orders. The EA uses short and similar stop levels, stop loss is equal to take profit and is defined by SL and TP parameter. The robot can be used in different modes, including scalper. The EA can be easily configured for any trading style satisfying demands of any trader.

\r\n

For real trading and testing on real ticks, set MinClose to 0.25. When working with control points (draft testing), leave the default MinClose value (0.025).

\r\n

Options

\r\n

TypeFilling - order filling policy.
Magic - magic number.
Risk - calculate lot depending on a deposit. We recommend that you use Risk, rather than Lot, since the MinClose parameter is related to it.
Lot - lot size for entering the market (priority is higher than the Risk field).
LotExponent - ratio that defines the progressive lot increase.
LimitGrid - order limitations, either for a common grid, or for a martingale (any option is limited by stop levels).
kStepGrid - ratio that defines the minimum step between two orders and calculated as a % ratio relative to the SL and TP parameter.
MinClose - minimum profit that can be closed by a signal (in % of a deposit).
SL and TP - stop levels - stop loss is equal to take profit, so both levels are set by the single parameter.
DrawDown - maximum drawdown, at which closing occurs (in % of a deposit).
Degree - regression indicator parameter.
Kstd - regression indicator parameter.
Bars - regression indicator parameter.

\r\n

", "url": "https://www.mql5.com/pt/market/product/30129", "small_icon": "https://c.mql5.com/31/252/classictrader-logo-60x60-1734.png", "middle_icon": "https://c.mql5.com/31/445/classictrader-logo-140x140-9629.png", "icon": "https://c.mql5.com/31/252/classictrader-logo-200x200-1617.png", "rating": 0, "price": 120, "published": 1530204920, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30061, "title": "Demo Creating orders with a fixed stop in dollars", "description": "

The utility helps open a deal with a stop loss that does not exceed the specified amount, or to refrain from it altogether. That is, it determines the number of lots to open the deal so that the stop loss is as close as possible to the specified amount in USD without exceeding it.

\r\n

For example, it will be indispensable when trading according to the Gerchik strategy. That is, when trading based on risks, with a fixed risk and a fixed take profit relative to stop loss. For example, if you always open deals with a risk of 10 USD and a take profit of 30 USD (3 to 1), this utility will help you to easily determine the number of lots for opening the deal to meet the conditions.

\r\n

It also allows you to:

\r\n

set auto application of the least possible stop loss for this symbol;
set take profit relative to stop loss (3 to 1, 4 to 1, etc.);
open a deal both by market and by placing a limit order;
check and avoid a deal, if take profit exceeds the boundaries of the instrument's price channel;
draw a line defined as the ratio of take profit to stop loss for partially closing the deal.

\r\n

The stop loss level can be specified both in USD and in percentage of the balance.

\r\n

You do not have to enter the market. Instead, you can simply track a \r\nnumber of lots necessary to open a trade and a take profit level. That \r\ndata is displayed in the utility settings window after you set a stop \r\nloss price.

\r\n

Launch the utility on the chart where a deal is to be opened. It is necessary to specify one parameter - the stop loss level (Stop loss Price).\r\n It represents the price where the stop loss is to be set. This price \r\ncan be set both manually by entering a value in the corresponding field,\r\n and by moving the red line created by the utility on the chart.

\r\n

Based on the stop loss level and other parameters, the utility determines the direction for opening a deal, the lot size, the order type for performing it (market or limit) and the take profit level.

\r\n

Expert Advisor Parameters

\r\n

Loss in dollars or per cent for a stop line (STOP_IN) – amount in USD or in percentage of the balance that would be lost in case a stop loss is triggered (in USD by default).
Choice of dimension for STOP_IN – select if the amount at risk for opening a trade is specified in USD or in percents of the balance.
Do not open a trade if at min lot stop is greater than STOP_IN – if true, then a trade will not be opened in case the loss received at a stop loss exceeds the allowable risk (default is true).
Opening price (0 - by market) – price for opening a trade (if > 0, then a limit order is sent, otherwise - order by market); this price can be set both manually by entering a value in the corresponding field, and by moving the green line created on the chart.
Multiplier for take – multiplier for determining the ratio of take profit to stop loss (default is 4, that is, reaching the take profit earns 4 times the possible loss when reaching the stop loss).
Draw a line at the level of a given number of stops – if greater than 0, a line will be drawn on the chart at the level of the specified multiplier relative to stop loss (default is 3, that is, the line will be drawn at the level of three stop losses from the opening price to the profit area). This line can be used for determining the price to partially close a trade, if you prefer closing trades gradually.
The price of the top level (0 - do not check) – the maximum price for take profit (if take profit exceeds this price,, the order will not be created). That is, if an instrument is traded within a channel, and you are 99% certain that the price will not go above the channel, you can set a borderline price for the channel to ensure that the take profit does not exceed the channel with the selected multiplier.

\r\n

The demo version of the utility works on two symbols only.

", "url": "https://www.mql5.com/pt/market/product/30061", "small_icon": "https://c.mql5.com/31/251/demo-creating-orders-with-a-fixed-stop-in-dollars-logo-60x60-7477.png", "middle_icon": "https://c.mql5.com/31/444/demo-creating-orders-with-a-fixed-stop-in-dollars-logo-140x140-2805.png", "icon": "https://c.mql5.com/31/251/demo-creating-orders-with-a-fixed-stop-in-dollars-logo-200x200-2308.png", "rating": 0, "price": 0, "published": 1530204756, "popularity": 0.009892486921620447, "category": "Utility", "votes": 0 }, { "id": 29801, "title": "Creating orders with a fixed stop in dollars", "description": "

\r\n

It also allows you to:

\r\n

set auto application of the least possible stop loss for this symbol;
set take profit relative to stop loss (3 to 1, 4 to 1, etc.);
open a deal both by market and by placing a limit order;
check and avoid a deal, if take profit exceeds the boundaries of the instrument's price channel;
draw a line defined as the ratio of take profit to stop loss for partially closing the deal.

\r\n

The stop loss level can be specified both in USD and in percentage of the balance.

\r\n

You do not have to enter the market. Instead, you can simply track a number of lots necessary to open a trade and a take profit level. That data is displayed in the utility settings window after you set a stop loss price.

\r\n

Launch the utility on the chart where a deal is to be opened. It is necessary to specify one parameter - the stop loss level (Stop loss Price). It represents the price where the stop loss is to be set. This price can be set both manually by entering a value in the corresponding field, and by moving the red line created by the utility on the chart.

\r\n

Based on the stop loss level and other parameters, the utility determines the direction for opening a deal, the lot size, the order type for performing it (market or limit) and the take profit level.

\r\n

Utility parameters

\r\n

Loss in dollars or per cent for a stop line (STOP_IN) – amount in USD or in percentage of the balance that would be lost in case a stop loss is triggered (in USD by default).
Choice of dimension for STOP_IN – select if the amount at risk for opening a trade is specified in USD or in percents of the balance.
Do not open a trade if at min lot stop is greater than STOP_IN – if true, then a trade will not be opened in case the loss received at a stop loss exceeds the allowable risk (default is true).
Opening price (0 - by market) – price for opening a trade (if > 0, then a limit order is sent, otherwise - order by market); this price can be set both manually by entering a value in the corresponding field, and by moving the green line created on the chart.
Multiplier for take – multiplier for determining the ratio of take profit to stop loss (default is 4, that is, reaching the take profit earns 4 times the possible loss when reaching the stop loss).
Draw a line at the level of a given number of stops – if greater than 0, a line will be drawn on the chart at the level of the specified multiplier relative to stop loss (default is 3, that is, the line will be drawn at the level of three stop losses from the opening price to the profit area). This line can be used for determining the price to partially close a trade, if you prefer closing trades gradually.
The price of the top level (0 - do not check) – the maximum price for take profit (if take profit exceeds this price,, the order will not be created). That is, if an instrument is traded within a channel, and you are 99% certain that the price will not go above the channel, you can set a borderline price for the channel to ensure that the take profit does not exceed the channel with the selected multiplier.

\r\n

Demo version of the utility: https://www.mql5.com/en/market/product/30061/

", "url": "https://www.mql5.com/pt/market/product/29801", "small_icon": "https://c.mql5.com/31/248/creating-orders-with-a-fixed-stop-in-dollars-logo-60x60-2250.png", "middle_icon": "https://c.mql5.com/31/446/creating-orders-with-a-fixed-stop-in-dollars-logo-140x140-9654.png", "icon": "https://c.mql5.com/31/248/creating-orders-with-a-fixed-stop-in-dollars-logo-200x200-3400.png", "rating": 1, "price": 30, "published": 1530204749, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 29890, "title": "MMM High Low", "description": "

MMM High Low strategy:

\r\n

The robot uses its built-in High-Low (HILO) indicator all the time and does a calculation to determine the prices trends. It sends an order, closes or moves the Trailing Stop loss position as the indicator works and indicates.
It will not send an order unless the calculations determine a good trend of profit.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
Spread value limit to prevent opening an order at a high Spread value. Usually brokers uses variable Spread values;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. In case of Hedging accounts, you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours, minutes and day the EA should not trade (Market Watch).

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional take profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: use this parameter to define the maximum spread allowed in your operations, set it to 0 if you do not want to use it;
Magic Number: this parameter identifies the order the EA is working with.

\r\n

Bad Time To Trade

\r\n

Defines the starting hour the EA will not trade (0..23h): this input defines the starting bad hour the EA will not trade;
Defines the starting minute the EA will not Trade (0..59): this input defines the starting bad minute of the starting bad hour the EA will not trade;
Defines the ending hour the EA will not trade (0..23h): this input defines the ending bad hour the EA will not trade;
Defines the ending minute the EA will not Trade (0..59): this input defines the ending bad minute of the ending bad hour the EA will not trade;
Defines the BAD day of week to trade: this input indicates the day of the week the EA should not trade. The tests indicate that Friday is the worst day;

\r\n

Inputs

\r\n

From Bar: first bar where the indicator starts to work in the period;
To Bar: last bar where the indicator checks in the period;
Period to check the Bars: the period in minutes the bars will be checked for calculations.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M6, spread 15 and Netted account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as you need.

", "url": "https://www.mql5.com/pt/market/product/29890", "small_icon": "https://c.mql5.com/31/249/mmm-high-low-logo-60x60-1425.png", "middle_icon": "https://c.mql5.com/31/444/mmm-high-low-logo-140x140-3512.png", "icon": "https://c.mql5.com/31/249/mmm-high-low-logo-200x200-5717.png", "rating": 0, "price": 150, "published": 1530034333, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30075, "title": "DynamicStep", "description": "

DynamicStep is a very simple Expert Advisor with a minimum of parameters.

\r\n

It works on netting accounts. Works on all timeframes.

\r\n

Its operation is based on following the market. Orders are opened on every candle. Thus, the position constantly changes following the market.

\r\n

The main objective is to optimize the bot in such a way as to always remain in the market trend. To do this, perform the optimization as often as possible. Changes in the market - changes in parameters.

\r\n

Only two parameters are to be optimized: Step and Limit.

\r\n

The robot requires a deposit of at $10000 for normal operation, as it needs to be able to open numerous orders.

\r\n

Parameters

\r\n

Risk – calculate the lot depending on the deposit.
Step – step for grid calculations.
Limit – restrict operation to one direction.
LongPr – close when reaching the specified profit for Long (in percent).
ShortPr – close when reaching the specified profit for Short (in percent).

", "url": "https://www.mql5.com/pt/market/product/30075", "small_icon": "https://c.mql5.com/31/251/dynamicstep-logo-60x60-1450.png", "middle_icon": "https://c.mql5.com/31/440/dynamicstep-logo-140x140-7262.png", "icon": "https://c.mql5.com/31/251/dynamicstep-logo-200x200-9401.png", "rating": 0, "price": 122, "published": 1529949616, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29893, "title": "Unison Song", "description": "

Monitoring: https://www.mql5.com/en/signals/author/yarkan

\r\n

Peculiarities

\r\n

Based on correlation of two currency pairs (two or more currency pairs can be specified in the settings).
Trades two pairs simultaneously (pair trading).
Do not use indicators.
Correctly works only with the major currency pairs (having USD).
Open prices only (the EA explicitly controls bar opening).
Displays the trade information in the left corner of the chart

\r\n

Recommendations

\r\n

Do not use cross currency pairs
Timeframe: M1
Leverage 1:500
Rebate to refund part of spread or commission

\r\n

Parameters

\r\n

Pairs - set the pairs to trade.
Lot - initial lot.
LotIncrease - algorithm for increasing the lot.
HistoryBars - the number of bars in history for the EA to analyze to determine the entry point.
Limit - the higher the value, the smaller the number of trades and the smaller the probability of a large drawdown.
TargetProfit - target profit to close positions.
TargetLoss - loss to open positions with an increased lot.
MaxDrawdown - if the drawdown (margin*100/balance) is greater than MaxDrawdown, the EA will not open positions with the initial lot.

\r\n

Explanation

\r\n

Example for setting the Pairs parameter: EURUSD, GBPUSD, USDJPY, USDCAD, USDCHF, AUDUSD, NZDUSD.

\r\n

All positions are closed if the total profit of all positions is equal to TargetProfit (decreases in proportion to the number of open positions).

\r\n

If the loss of the first positions (with the initial lot) is greater than TargetLoss, new positions are opened with an increased lot.

\r\n

TargetLoss is increased in proportion to the number of open positions.

\r\n

Testing was performed in \"Every tick based on real ticks\" mode.

", "url": "https://www.mql5.com/pt/market/product/29893", "small_icon": "https://c.mql5.com/31/249/unison-song-logo-60x60-9944.png", "middle_icon": "https://c.mql5.com/31/446/unison-song-logo-140x140-4121.png", "icon": "https://c.mql5.com/31/249/unison-song-logo-200x200-6408.png", "rating": 0, "price": 500, "published": 1529949602, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30122, "title": "Auto Fibo with smart Trend Detection", "description": "

I want to present to you my solution in the implementation of automatic drawing of Fibo levels on the whole trend and the last trend leg. The logic of the indicator is based on the principle of swings, and when indicator gets a signal for a trend direction change, the previous key point before reversing is considered the start point of the indicator's drawing. When you test the indicator, note that changing the direction of the whole trend leg of Fibonacci often leads to a reversal of the trend. This is the main feature of the indicator that the moment of the beginning of drawing is the moment of the trend reversion by the swing logic.

\r\n

You can also add several instances of the indicator to the chart and receive Fibo data from several timeframes simultaneously. That is, on the chart H1, for example, you can see the levels with H4 and D1. You can also use this property in your EA for the simultaneous processing of several timeframes.

\r\n

This tool allows you to:

\r\n

Find out the direction of the trend.
The point of the trend reversal.
And the Fibo levels will allow you to determine the levels of trend correction

\r\n And all this will happen automatically. Below, I will show you the video of how the indicator works.

\r\n\r\n

\r\n

Parameters

\r\n

timeframeMain - timeframe, on which the indicator will work. current - current timeframe. That is, on one chart you can place several timeframes and see their trend direction and Fibo levels.
Fibo description - description to distinguish your Fibo from the indicator.
Whole trend color - color of the Fibo levels, which starts from the moment of the turn of the trend to the maximum/minimum point of the trend.
Trend leg color - color of the Fibo levels for the last leg of the trend.
Lines style - style of the level lines.
Lines width - thickness of the lines.

Good luck!

", "url": "https://www.mql5.com/pt/market/product/30122", "small_icon": "https://c.mql5.com/31/251/auto-fibo-with-smart-trend-detection-logo-60x60-3257.png", "middle_icon": "https://c.mql5.com/31/445/auto-fibo-with-smart-trend-detection-logo-140x140-5011.png", "icon": "https://c.mql5.com/31/251/auto-fibo-with-smart-trend-detection-logo-200x200-6441.png", "rating": 0, "price": 75, "published": 1529949549, "popularity": 1.0198406864393854, "category": "Indicator", "votes": 0 }, { "id": 30086, "title": "VR Atr Pro MT5", "description": "

VR ATR Pro é um indicador técnico projetado para determinar níveis-alvo com base na análise estatística de períodos comerciais anteriores. Ele se baseia no cálculo matemático do movimento médio de preços durante um período de tempo selecionado.

Princípio de funcionamento do indicador, baseado em estatística

O funcionamento do indicador baseia-se na observação do comportamento diário do preço: cada período comercial é caracterizado por uma certa amplitude de movimento — o preço percorre uma certa distância em pontos tanto para cima quanto para baixo a partir do ponto de abertura.

Da mesma forma, pode-se supor que no início de cada novo período comercial, o preço tem uma \"autonomia\" condicional... por meio de um cálculo matemático simples, determina-se o valor médio... Esse valor médio não é uma garantia, mas serve como um ponto de referência, indicando o provável tamanho do movimento no período atual.

Assim, o indicador aplica esse princípio: ele analisa as oscilações históricas de preços durante um período de tempo selecionado, calcula o valor estatístico médio e exibe níveis no gráfico. Isso permite que o trader compreenda a força e a \"autonomia\" do instrumento financeiro no período atual.

Exibição do indicador

O indicador exibe dois níveis no gráfico:

Nível Superior — objetivo calculado para movimento de alta.
Nível Inferior — objetivo calculado para movimento de baixa.

Além disso, os níveis podem ser exibidos como áreas, o que permite considerar o desvio e obter uma faixa de preços-alvo.

Características principais

Os sinais são fixados após o término do período e não são alterados posteriormente.
Funciona com diversas classes de ativos: pares de moedas (Forex), metais, índices (CFD), futuros e criptomoedas.
Pode ser aplicado em qualquer intervalo de tempo.
Permite configurar a exibição de níveis exatos ou zonas.
Suporta o envio de notificações por meio de mensagens push para smartphones, e-mail e alertas padrão do terminal.
Versões funcionalmente idênticas estão disponíveis para MetaTrader 4 e MetaTrader 5.

Aplicação prática

O indicador pode ser usado como uma ferramenta auxiliar para:

Identificar possíveis zonas para a colocação de ordens de Take Profit e Stop Loss.
Avaliar o potencial de movimento do preço dentro de uma estratégia comercial existente.
Filtrar condições de mercado: atingir o nível calculado pode servir como sinal de esgotamento da força do movimento atual.

Recomendações

O período de cálculo do indicador (Indicator calculation timeframe) deve ser maior que o Timeframe no qual o indicador opera.
O melhor período para calcular o indicador é o Período PERIOD_D1.
Use o indicador em conjunto com seu sistema de negociação.
Coloque o Take Profit dentro dos níveis e o Stop Loss fora dos níveis.
Use um período de cálculo (Indicator calculation period) maior que 10 para obter resultados mais precisos.
Caso o preço ultrapasse um dos níveis, é recomendável interromper a negociação até o próximo período comercial.

VR ATR Pro é uma ferramenta de qualidade para avaliar o potencial intervalo de movimento do preço. Sua lógica é baseada na análise da volatilidade histórica, permitindo uma abordagem objetiva para a determinação de níveis-alvo. Como qualquer ferramenta analítica, requer a compreensão dos seus princípios de funcionamento.

Configurações do indicador

[+] === Main Settings === [+] - Configurações principais;

Indicator calculation period - Período de cálculo do indicador
Number of periods to display - Número de períodos a exibir
Indicator calculation timeframe - Período de tempo para cálculo do indicador
Show text labels - Mostrar rótulos de texto
Display type - Tipo de exibição

Percentage for area - Percentual para área
Show achieved targets - Mostrar metas alcançadas
Show potential number of points - Mostrar número potencial de pontos

[+] === Current Period Settings === [+] - Configurações do período atual;

Current uptrend figure color - Cor da figura de tendência de alta atual
Current uptrend figure line style - Estilo da linha da figura de tendência de alta atual
Current uptrend figure line thickness - Espessura da linha da figura de tendência de alta atual
Fill current uptrend figure - Preencher figura de tendência de alta atual
Current downtrend figure color - Cor da figura de tendência de baixa atual
Current downtrend figure line style - Estilo da linha da figura de tendência de baixa atual
Current downtrend figure line thickness - Espessura da linha da figura de tendência de baixa atual
Fill current downtrend figure - Preencher figura de tendência de baixa atual

[+] === Settings of periods in history === [+] - Configurações de períodos no histórico;

Uptrend figure color - Cor da figura de tendência de alta
Uptrend figure line style - Estilo da linha da figura de tendência de alta
Uptrend figure line thickness - Espessura da linha da figura de tendência de alta
Fill uptrend figure with color - Preencher figura de tendência de alta com cor
Downtrend figure color - Cor da figura de tendência de baixa
Downtrend figure line style - Estilo da linha da figura de tendência de baixa
Downtrend figure line thickness - Espessura da linha da figura de tendência de baixa
Fill downtrend figure with color - Preencher figura de tendência de baixa com cor

[+] === Other === [+] - Outros;

Text size - Tamanho do texto
Prefix - Prefixo

Versão para: MetaTrader 4

Seus comentários são os melhores agradecimentos para nós! Deixar um comentário.

Mais informações em blog.

", "url": "https://www.mql5.com/pt/market/product/30086", "small_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-60x60-3798.png", "middle_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-140x140-2956.png", "icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-200x200-4625.png", "rating": 4.75, "price": 30, "published": 1529949418, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 30063, "title": "RMI Scalper EA", "description": "

The RMI Scalper EA is a fully automated Expert Advisor that trades pullbacks from the major trend using RMI and limited averaging. The EA trades using market orders and uses averaging to safely turn otherwise negative trades positive. This EA works best on USDJPY, EURUSD, GBPUSD, USDCAD, USDCHF, AUDJPY, EURCAD, EURGBP and EURJPY using the M30 timeframe and has the option to trade multiple pairs but only one pair at any one time to increase trade frequency without increasing draw down.

Please note: I have made the decision to give this EA away and many more for free with limited support so that I can concentrate on Custom EA. If you wish to use this EA it will need optimising, and if you feel like sharing your settings please do so in the comments.
View More Products - https://www.mql5.com/en/users/robots4forex/seller#!category=1
Monitoring Signals - https://www.mql5.com/en/signals/author/robots4forex?orderby=gain

Features

Fully automated
Not sensitive to spread
Risk Money Management
Works on any account size
Always a stop loss in place
Hedge accounts only
This system has the option to be NFA/FIFO compliant
No Grids
No Martingale

Input Settings

Order Settings

MagicOrderNumber - Unique number for the EA to identify its trades. Any integer.
Lots - Number of fixed lots per trade if money management is off. Values from 0.01 to 50.0.
Slippage - Slippage in pips. Values from 1 to 10.
MoneyManagement - If turned on trade lot sizes are calculated on account risk, true/false.
MoneyManagementRisk - Risk per trade if money management is on. Values from 0.01 to 0.1.
AllowNewTrades - Turn this of to disable new trades, true/false.
AccountProfitLock - If money management is on the EA will stop trading if the account balance drops to this fraction of the maximum account balance (0.5 = 50% of account balance). Values from 0.0 to 1.0.
NFA_FIFOCompliant - Turn this on if you need this to be NFA and FIFO compliant, true/false.
MultiPairSingleTrade - Turn this on to trade multiple pairs (Multiple chart windows with this EA attached) but limit to only having trades open on one pair at a time, increases trade frequency without increasing draw down, true/false.

Entry Settings

TimeFrame - Timeframe drop-down selection to lock EA to a timeframe so that selection of the chart timeframe doesn't affect the EA. When testing ensure the tester timeframe is set to the same value.
Trend1TimeFrame - Timeframe drop-down selection for the first trend detection.
Trend2TimeFrame - Timeframe drop-down selection for the second trend detection.
MaxSpread - Maximum spread in pips that the EA will trade. Values from 1.0 to 10.0.
TakeProfit - The take profit (Setting to 0 disables). Values from 0 to 200 depending on the pair being traded.
StopLoss - The fixed stop loss visible to the broker - Values 25 to 4000 depending on the pair being traded, should be high when averaging is enabled.
Averaging - If turned on averaging is used to recover negative trades, true/false.
AveragingStep - The negative move in pips against the current trade to trigger the next averaging trade. Values 5 to 100.
AveragingBars - The number of bars from previous trade before AveragingStep gets ignored. Values 1 to 1000.
AveragingMultiplier - The lot multiplier for averaging trades. Values 1.0 to 2.0.
AveragingCount - The maximum open trades before the trade group is considered a loss and closed. Values 1 to 20.
BreakEven - If turned on a break even is performed, true/false.
BreakEvenStartPips - The number of pips before break even is performed. Values 1 to 100.
BreakEvenPips - The number of pips infront of position open to place the stop loss. Values 0 to 100.
TrailingBars - A trailing stop is performed based on this number of previous bars (Setting to 0 disables). Values 0 to 10.
TrailingBarsTimeFrame - Timeframe drop-down selection for trailing stop bars.
MinTrailingStopLoss - The minimum stop loss distance when trailing stops are enabled. Values 0 to 100.
RMIPeriod - The RMI period. Values 2 to 50.
MomPeriod - The momentum period used to calculate RMI. Values 2 to 50.
RMIThreshold - The RMI threshold, the smaller the value the less trades will be triggered. Values 5 to 45.

", "url": "https://www.mql5.com/pt/market/product/30063", "small_icon": "https://c.mql5.com/31/251/rmi-scalper-ea-logo-60x60-4762.png", "middle_icon": "https://c.mql5.com/31/446/rmi-scalper-ea-logo-140x140-1270.png", "icon": "https://c.mql5.com/31/251/rmi-scalper-ea-logo-200x200-9521.png", "rating": 4, "price": 0, "published": 1529949404, "popularity": 1.6293750114196925, "category": "Expert", "votes": 2 }, { "id": 30079, "title": "Url HTML and XML to CSV Mt5 Demo", "description": "

Presentation

\r\n

The URL html and xml to csv is designed to get contents from URLs with html or xml content, and to download it to an output format as a txt or as a csv file.

\r\n

It enables to get the whole web sites page, starting with the http protocol, in a document for a further use and in additional with downloading directly on the MetaTrader applications and on the desktop.

\r\n

It is a good advantage for taking the most data from events and economic calendars, and also publications related to the instruments available on the trading terminal.

\r\n

For this demo version, two economic calendars are available and could be downloaded, the forex factory and the trading economics calendar web sites with html pages.

\r\n

System features

\r\n

With fast execution, the utility can get the content from websites with xml encoded tags to the MetaTrader terminal data paths. The additional languages on the web page will not be downloaded, only those with xml encoding, for some MetaTrader applications speed and security dispositions.

\r\n

But all the html tags will be included in the output formats documents available after downloading.

\r\n

Recommendations

\r\n

First, entry the URL starting with http or https on the url field on the inputs, then select the output format on text or on csv pages. The documents will be download from the URL website and will be available on the terminal \"File\" paths. It is possible to re-use the system multiple times, on any timeframes and with the list of instruments available.

\r\n

Special additions

\r\n

The URL html and xml to csv is running as indicated on the video. It enables to conserve the documents on a file named \"webpage.txt\" or \"webpage.csv\", on the MetaTrader paths.

\r\n

It runs with all the URLs that allow xml encoded tags on the websites pages, and could get attached on an instrument chart with no interferences with some already set Expert Advisors or indicators on some additional charts opened on the desktops.

\r\n

INPUTS

\r\n

Economic_Calendar_Url: the URL of the html or the xml web page with http or https
FILE_FORMAT: the desired file format output, txt or csv

", "url": "https://www.mql5.com/pt/market/product/30079", "small_icon": "https://c.mql5.com/31/251/url-html-and-xml-to-csv-mt5-demo-logo-60x60-5615.png", "middle_icon": "https://c.mql5.com/31/446/url-html-and-xml-to-csv-mt5-demo-logo-140x140-1590.png", "icon": "https://c.mql5.com/31/251/url-html-and-xml-to-csv-mt5-demo-logo-200x200-2044.png", "rating": 0, "price": 0, "published": 1529947794, "popularity": 0.002822372730471538, "category": "Utility", "votes": 0 }, { "id": 29968, "title": "AvgVolumes", "description": "

This indicator is based on Volumes standard indicator, calculates the average of Volumes based on the last N bars set by users, and if the value \r\nof the volume is bigger then a set % respect the average a different color will be used. The indicator is shown in a separate indicator window.

\r\n

This version has now a limitation in setting the % about the threshold.
If you are interested to set threshold consider to \r\nbuy the PRO version (https://www.mql5.com/en/market/product/35925)

\r\n

If you want to use the indicator for forex, try this specific product

\r\n

Forex Volumes Adv https://www.mql5.com/en/market/product/46818

\r\n

\r\n\r\n\r\n

Inputs

\r\n\r\n\r\n

Bars used to calculate the average volume.
Threshold (in %) for changing the color of the Bar. If the bar is higher of the % respect the calculated average. (Read only in this version)
Show user notification when volume is above the set threshold
Send notification for use with EA

\r\n

\r\n\r\n\r\n

\r\n

\r\n Version 1.7 2019.03.21 \r\n

\r\n\r\n\r\n

\r\n Introduced alert message to user \r\n

\r\n

\r\n\r\n\r\n

\r\n

\r\n Version 1.6 2019.03.20 \r\n

\r\n\r\n\r\n

\r\n -Added Real Volume (experimental), let me know if it works \r\n

\r\n

", "url": "https://www.mql5.com/pt/market/product/29968", "small_icon": "https://c.mql5.com/31/267/avgvolumes-logo-60x60-2729.png", "middle_icon": "https://c.mql5.com/31/439/avgvolumes-logo-140x140-4176.png", "icon": "https://c.mql5.com/31/267/avgvolumes-logo-200x200-9527.png", "rating": 5, "price": 0, "published": 1529581990, "popularity": 0.4749516004812665, "category": "Indicator", "votes": 1 }, { "id": 29992, "title": "Market Grid View", "description": "

Market Grid View is a utility to replace the original 'Market Watch' window. It was designed to be fast and give the user the ability to navigate over all symbols with just a click, while watch the price change or last trade value.

\r\n

To use it, configure your \"Market Watch\" window with all the symbols you want to monitor, and you can close it. Then insert the indicator in the graph.

\r\n

The parameters window need to be configured:

\r\n

Columns: the number of columns you want to be drawn
ShowInfo: the type of information you want to show

last trade value in the same currency as the symbol
price change from close
price change from last trade in last session
price change from open

\r\n

The price change from close is:

\r\n

100*(last - close)/close
The close is the last value trade in the last day. It is very common to measure the price change with this method.

\r\n

The price change from last trade in last session is:

\r\n

100*(last - last_session_trade)/last_session_trade

\r\n

The price change from open is:

\r\n

100*(last - open)/open
This is very useful for daytraders that do not stay with positions overnight.

\r\n

After the Market Grid View is inserted, all symbols will be shown in a grid.

\r\n

The background color for each symbol box always uses the same \"ShowInfo\" configuration to estimate the color. When the price change is 10% or bigger, the maximum color will be set (green or red), otherwise, a proportional color will be set.

\r\n

Even when using the LAST in the show info field, the background is still configured based on price change from last trade from last session.

\r\n

If you click inside a symbol box, the chart will be configured with the symbol you clicked in.

\r\n

There is a limitation of 200 symbols, because in the computer I used to test, I have memory limitations, so I could not test with more then 200 symbols. If you need more than that, please email me.

\r\n

I only validate it in Brasilian Stock Market (BOVESPA) and XM Forex trading.

\r\n

HEATMAP Functionality

\r\n

You can use this tool as a heatmap. If you configure the symbols to be close in the list, than it will became a heatmap. Suppose you want to follow all stocks that are related to Oil, then you group close all the symbols related to Oil, and it will serve as a heatmap.

\r\n

For example, you want to check the Australian Stock Market. Then select only symbols from Australia from Symbols window (ctrl+M), and you have a HeatMap for Australia. Check the print bellow.

\r\n

Or, suppose you want to figure out which section from Bovespa is having the better performance today. Order your Symbols in market watch (ctrl+M) and them will be separated by sections. For example, in the 2 firsts lines of the screenshot for iBovespa, we can see how the banks are performing at this moment. Check the other print bellow.

", "url": "https://www.mql5.com/pt/market/product/29992", "small_icon": "https://c.mql5.com/31/250/market-grid-view-logo-60x60-2358.png", "middle_icon": "https://c.mql5.com/31/445/market-grid-view-logo-140x140-6343.png", "icon": "https://c.mql5.com/31/250/market-grid-view-logo-200x200-5795.png", "rating": 5, "price": 0, "published": 1529419481, "popularity": 0.02991875140294349, "category": "Utility", "votes": 1 }, { "id": 29973, "title": "Lines for MT5", "description": "

Do you need to check support and resistance lines?

\r\n

Do you need to find them really fast and automatically?

\r\n

Do you want to set your own settings how to find them?

\r\n

Then this indicator is your right choice!

\r\n

Indicator Lines is developed for finding support and resistance lines on chart. It does its job quickly and fully automatically.

\r\n

Main principle of algorithm is to get all extremes on chart (according to \"Density\" parameter). Then indicator tries to find minimally 3 points (according to \"Minimal count of points\" parameter) which can be used for calculation of support or resistance line. Finally there is applied linear regression for construction of lines.

\r\n

Parameters

\r\n

Density - how much in details to search in extremes. Bigger number means less details, smaller number means more details. Base unit is 1 bar on the chart.
History - how far to go in history while searching. When you set -1, the indicator processes all bars from history. Base unit is 1 bar on the chart.
Range - how far search support and resistance lines from given extreme. Base unit is 1 bar on the chart.
Minimal count of points - how many extremes is used for construction of lines.
Maximal deviation - Difference between perfect line and real line. Base unit is %.
Color, width, style of lines
Prolong lines to future - great feature for checking breaking lines in future
Show points of lines - if you want to see how the lines are constructed
Color of points
Your own prefix for object - in case you want to attach more Lines on same chart

\r\n

Final line is constructed as linear regression from all found points.

", "url": "https://www.mql5.com/pt/market/product/29973", "small_icon": "https://c.mql5.com/31/250/lines-for-mt5-logo-60x60-6633.png", "middle_icon": "https://c.mql5.com/31/441/lines-for-mt5-logo-140x140-4731.png", "icon": "https://c.mql5.com/31/250/lines-for-mt5-logo-200x200-2655.png", "rating": 4, "price": 30, "published": 1529344083, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 29794, "title": "Calc for MT5", "description": "

This indicator is designed to provide all useful information about symbol, account, positions and profit.

\r\n

It is developed for improving trader's money management.

\r\n

Parameters

\r\n

Calc can be divided to separate blocks. Each block is possible to hide, set its own color and other properties.

\r\n

Block symbol:

\r\n

This block displays information about actual SPREAD, POINT VALUE (in deposit currency for 1 lot), SWAP LONG and SHORT.

\r\n

Show symbol info - display/hide this block
Color of symbol info - color of this block

\r\n

Block account:

\r\n

This block displays information about CALCULATED LOTS (what volume to use for opening position according to money management), AVAILABLE LOTS (maximal volume which is possible to open), RISK PERCENT and RISK AMOUNT (according to money management set in inputs)

\r\n

More about CALCULATED LOTS:

\r\n

It is calculated using stop loss line (horizontal dotted line in Magenta color). This line represents virtual stop loss related to current price. It measures range between them. Result of this range is used for calculation final volume according to money management. You can set money management as percent from actual balance or as absolute value. Stop loss line can be moved up and down for better adjustment of stop loss. All related data are recalculated immediately.

\r\n

More about AVAILABLE LOTS:

\r\n

This represents maximal volume for opening position. It works for FOREX and CFD.

\r\n

Show account info - display/hide this block
Color of account info - color of this block
Color of stop loss line
Risk value - can be specified absolute amount or percent from balance - see next parameter
Risk type - percents or absolute amount from balance

\r\n

Block open positions:

\r\n

This block displays information about stop loss amount and take profit amount on actual symbol and all symbols together (in case of opened positions on more symbols). It can be useful when trader wants to have control of his profit/loss.

\r\n

Show open position info - display/hide this block
Positive color - color of positive value (profit)
Negative color - color of negative value (loss)
Default color - in case of no open position

\r\n

All these blocks have own legends. This legend can be displayed/hidden (see parameter \"Show legend\") and moved to the left/right side (see parameter \"Legend horizontal position\").

\r\n

Ruler

\r\n

It is special tool which is designed to fast calculate possible profit/loss. When this tool is enabled, it creates \"ruler\" on the right side of chart. On this ruler you can easy track actual profit/loss according to your money management.

\r\n

Ruler has 2 modes:

\r\n

When trader does not have open position on actual symbol - ruler displays potential profits on both sides (LONG, SHORT). It means that if you open position now with volume from calculated lots, then values on the ruler represent your potential profit.
When trader has open position(s) on actual symbol - ruler displays profit and loss according to open position(s).

\r\n

You can specify how many values will be displayed, adjust colors and simply display or hide ruler by button.

\r\n

Parameters of ruler:

\r\n

Show ruler - display/hide ruler - you can use button on the right side too
Density of ruler - how many values to calculate (display)
Show always bid price on ruler - display Bid price only on ruler (useful when you have open short positions and do not want to check Ask price)
Color of positive ruler - color of positive values (profit)
Color of negative ruler - color of negative values (loss)
Color of ruler labels - color of values on ruler
Color of ruler button for deactivate
Color of ruler button for activate

", "url": "https://www.mql5.com/pt/market/product/29794", "small_icon": "https://c.mql5.com/31/248/calc-for-mt5-logo-60x60-5585.png", "middle_icon": "https://c.mql5.com/31/444/calc-for-mt5-logo-140x140-8468.png", "icon": "https://c.mql5.com/31/248/calc-for-mt5-logo-200x200-3559.png", "rating": 4.833333492279053, "price": 0, "published": 1529338611, "popularity": 0.6427129393801592, "category": "Utility", "votes": 6 }, { "id": 29958, "title": "Ultimate Double Top Bottom Indicator MT5 FREE", "description": "

This indicator is designed to detect high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

This is the FREE version of the indicator: https://www.mql5.com/en/market/product/29957

\r\n

The free version works only on EURUSD and GBPUSD!

\r\n

Double top and bottom patterns are chart patterns that occur when the trading instrument moves in a similar pattern to the letter \"W\" (double bottom) or \"M\" (double top). The patterns usually occur at the end of a trend and are used to signal trend reversals very early.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

The provided video shows many example signals and the maximum performance of the indicator.

\r\n

With maximum performance, I mean that this could have been the profit if you would have exited every trade at the optimal price level. Of course, this can’t be achieved during real trading conditions where you don’t know future price moves.

\r\n

But the video shows that the raw signals of the indicator (without visual filtering) produced 24 winning trades and only 11 losing trades. In the video, I count a trade as a winning trade if it reaches at least 1R profit (1R = initial risk of the trade). So, these raw signals would be already very profitable if you place the target for all trades at 1R and then leave the trade alone, without trying to find the optimal exit.

\r\n

This indicator draws the double tops/bottoms on the chart and gives alerts via Email, Push and via MT5-alert in the moment when a high probability double top/bottom entry signal is created.

\r\n

This indicator does NOT repaint. You can test it in the strategy tester. Then you will see that these good signals come in real-time on every trading instrument and on any timeframe!

\r\n

Tips:

\r\n

I use this indicator on M30 and higher. Then there is less noise in the price moves and I have usually more time to react on entry signals.
When a signal occurs then ask yourself if there is enough room for a big subsequent move in direction of the trend (support/resistance far away?).

\r\n

Parameters

\r\n

candlesCalculated: With this parameter you can define how many candles backward the indicator should show the double tops/bottoms. The default 2000 means that the indicator will show double tops/bottoms on the newest 2000 candles only.
alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\"-signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\"-signals for short entries
alertsViaMT5: True = Yes, False = No\t- if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email

", "url": "https://www.mql5.com/pt/market/product/29958", "small_icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-indicator-mt5-free-logo-60x60-5096.png", "middle_icon": "https://c.mql5.com/31/446/ultimate-double-top-bottom-indicator-mt5-free-logo-140x140-3836.png", "icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-indicator-mt5-free-logo-200x200-2548.png", "rating": 4.666666507720947, "price": 0, "published": 1529073748, "popularity": 2.1480352329672696, "category": "Indicator", "votes": 6 }, { "id": 29957, "title": "Ultimate Double Top Bottom Reversal Indicator MT5", "description": "

This indicator is designed to detect high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

The provided video shows many example signals and the maximum performance of the indicator.

\r\n

This indicator draws the double tops/bottoms on the chart and gives alerts via Email, Push and via MT5-alert in the moment when a high probability double top/bottom entry signal is created.

\r\n

This indicator does NOT repaint. You can test it in the strategy tester. Then you will see that these good signals come in real-time on every trading instrument and on any timeframe!

\r\n

Tips:

\r\n

I use this indicator on M30 and higher. Then there is less noise in the price moves and I have usually more time to react on entry signals.
When a signal occurs then ask yourself if there is enough room for a big subsequent move in direction of the trend (support/resistance far away?).

\r\n

Parameters

\r\n

candlesCalculated: With this parameter you can define how many candles backward the indicator should show the double tops/bottoms. The default 2000 means that the indicator will show double tops/bottoms on the newest 2000 candles only.
alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\"-signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\"-signals for short entries
alertsViaMT5: True = Yes, False = No\t- if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email

", "url": "https://www.mql5.com/pt/market/product/29957", "small_icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-reversal-indicator-mt5-logo-60x60-5456.png", "middle_icon": "https://c.mql5.com/31/438/ultimate-double-top-bottom-reversal-indicator-mt5-logo-140x140-5461.png", "icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-reversal-indicator-mt5-logo-200x200-6160.png", "rating": 1, "price": 59, "published": 1529073741, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 29878, "title": "Strong Trends With Magic Entries MT5", "description": "

With this system you can spot high-probability trades in direction of strong trends. You can profit from stop hunt moves initiated by the smart money!

\r\n

Important Information

\r\n

How you can maximize the potential of the scanner, please read here: www.mql5.com/en/blogs/post/718109

\r\n

Please read also the blog about the usage of the indicator: Professional Trading With Strong Momentum.

\r\n

With this system you have 3 reliable edges on your side:

\r\n

A strong trend (=high probability of continuation)
A deep pullback (=the price should not be there within a strong trend! Is it a stop hunt?)
A strong rejection of the pullback (=It was most probably only a stop hunt. Let's enter!)

\r\n

The rules for a short trade are:

\r\n

The thick blue and thick orange lines are strong below the price (strong downward trend indicated, more about the strength later)
At the same time there must be 2 thinner orange-red lines (they look like stairs) above the price (this confirms the price action within the trend)
The price then have to jump above the 2 thinner orange-red lines (or at least between them) and then must be rejected below the two thinner lines again. This forms a peak (an inverted V). The peak should consist of maximum 4 candles.
The entry signal is the move below the lower line of the 2 thinner orange-red lines.

\r\n

The rules for a long trade are:

\r\n

The thick blue and thick orange lines are strong above the price (strong upward trend indicated)
At the same time there must be 2 thinner green lines (they look like stairs) below the price (this confirms the price action within the trend)
The price then have to jump below the 2 thinner green lines (or at least between them) and then must be rejected above the two thinner lines again. This forms a peak (a V). The peak should consist of maximum 3-4 candles.
The entry signal is the move above the upper line of the 2 thinner green lines.

\r\n

Additional Edges:

\r\n

You will have an additional edge if you only trade the FIRST signal within a trend! The third screenshot shows what I mean with FIRST signal.
You will a further additional edge if you trade only the signal in direction of an edge of the bigger timeframe. Screenshots 4, 5, 6 and 7 show what

\r\n

ATTENTION: You need 3800 candles on the chart for the orange line to be drawn! The big amount of candles (3800) is also the reason why the indicator only works for time frames lower than D1. Most brokers don't provide 10+ years of historic candles.

\r\n

Parameters

\r\n

candlesCalculated: the number of candles for which the orange and blue lines are calculated. A lower value uses less computer ressources
distanceInnerLine: the distance between the lines which looks like stairs expressed in multiples of the ATR-indicator
showBand: True = Yes, False = No - if true, then the black band is shown. The band is normally not needed. During backtesting it can be usefull.
xxx: is used for internal calculation. Must be 0. Don't touch/change this value! The indicator calls itself (recursive calls) with different values for xxx, yyy and zzz to calculate the values of different time frames. Therefore xxx, yyy and zzz must not be configured manually.
yyy: is used for internal calculation. Must be 0. Don't touch/change this value! The indicator calls itself (recursive calls) with different values for xxx, yyy and zzz to calculate the values of different time frames. Therefore xxx, yyy and zzz must not be configured manually.
zzz: is used for internal calculation. Must be 0. Don't touch/change this value! The indicator calls itself (recursive calls) with different values for xxx, yyy and zzz to calculate the values of different time frames. Therefore xxx, yyy and zzz must not be configured manually.

", "url": "https://www.mql5.com/pt/market/product/29878", "small_icon": "https://c.mql5.com/31/249/strong-trends-with-magic-entries-mt5-logo-60x60-6571.png", "middle_icon": "https://c.mql5.com/31/446/strong-trends-with-magic-entries-mt5-logo-140x140-4338.png", "icon": "https://c.mql5.com/31/249/strong-trends-with-magic-entries-mt5-logo-200x200-7198.png", "rating": 5, "price": 69, "published": 1529001711, "popularity": 0.6659232059192968, "category": "Indicator", "votes": 2 }, { "id": 29722, "title": "MMM Ichimoku Kinko Hyo", "description": "

MMM Ichimoku EA strategy

\r\n

The robot uses its built in Ichimoku indicator all the time and does a calculation to determine the prices trends. If it indicates the price will be bullish, it sends a buy order. If the indicator indicates the price will be bearish, it sends a sell order;
It will not send an order unless the calculations determines a good trend;

\r\n

It protects your money because it is provided with

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. This way you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (order open time).

\r\n

General Inputs

\r\n

Closes orders with any profit of value (currency): closes any order after reaching profit define in currency value;
Take profit (order profit ceiling): traditional take profit (pips);
Stop loss (loss limit): traditional stop loss (pips);
Lots volume to trade: the lots volume to be traded;
Trailing stop loss: trailing stop loss distance. If input an invalid distance, the minimum distance allowed by market will be used. Disabled if = 0 (ZERO);
Maximum number of simultaneous orders: limits the number of pending orders. For Hedge account type;
Minimum equity percentage to allow opening new orders: defines the equity minimum percentage to open new orders;
Equity Percentage to Stop Out: defines the equity percentage low level to stop out. Closes All orders if reaches this level. Disabled if = 0;
Magic Number: identifies the orders opened and administrated by this EA;

\r\n

Bad time to trade inputs

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's inputs

\r\n

Tenkan Sen: indicator's parameter. It's default value is 9. Do not change it if you will not test before using;
Kijun Sen: indicator's parameter. It's default value is 26. Do not change it if you will not test before using;
Senkou Span B: indicator's parameter. It's default value is 52. Do not change it if you will not test before using;
Shift: shift used by the Ichimoku indicator.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15, spread 15 and Hedging account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/29722", "small_icon": "https://c.mql5.com/31/247/mmm-ichimoku-kinko-hyo-logo-60x60-7506.png", "middle_icon": "https://c.mql5.com/31/447/mmm-ichimoku-kinko-hyo-logo-140x140-9147.png", "icon": "https://c.mql5.com/31/247/mmm-ichimoku-kinko-hyo-logo-200x200-4154.png", "rating": 0, "price": 130, "published": 1528737667, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29809, "title": "MMM Adx PSar and MA", "description": "

MMM ADX, P. SAR & MA strategy:

\r\n

As requested by some experienced traders, this EA's strategy uses its 3 built-in indicators to enhance its signals and decide to open a new order at the right time, there is an ADX indicator and you may choose its signal's strength, a parabolic SAR to help and confirm the trends and a MA to check if the prices are deviating from its patterns. By joining the 3 indicators' data, it is possible to calculate a good and strong trend direction, avoiding sudden market movements against your trading operations;
It is highly recommended for trend trading, however it also allows scalping;
You can define the orders limits of profits in currency value. It is much easier.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. This way you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (Time of Market Whatch).
Spread Limit to allow trading: where you define the maximum spread values to allow auto trading.

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: defines the spread limit to allow any auto trade if the spread value is higher then this input value, it will no trade. Disabled if = 0;
Magic Number: this parameter identifies the orders the EA is working with;

\r\n

Bad time to trade inputs:

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's Inputs

\r\n

ADX used Period: the period ADX is working;
MA Period: the period used on Moving Average calculations;
ADX & SAR shit: ADX and SAR used shit;
Price applied: the price used on ADX, SAR and MA;
ADX Signal Strength: choose the ADX signal strength to allow the EA's trade operations;
SAR step: the step increment used by the SAR indicator;
SAR Maximum: the SAR superior.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15, spread 15 and Hedging account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/29809", "small_icon": "https://c.mql5.com/31/248/mmm-adx-psar-and-ma-logo-60x60-1988.png", "middle_icon": "https://c.mql5.com/31/444/mmm-adx-psar-and-ma-logo-140x140-9139.png", "icon": "https://c.mql5.com/31/248/mmm-adx-psar-and-ma-logo-200x200-2184.png", "rating": 3, "price": 130, "published": 1528737641, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 29844, "title": "Trader Control Panel DEMO", "description": "

TCP - Trader Control Panel is an extension to build into \r\nMetaTrader 5 manual methods to control open positions. It adds opening \r\nand closing position feature as well as user-friendly monitoring \r\ndashboard, money and risk management when opening. Opening and closing \r\npositions are done by mouse by interactively placing stop loss line on \r\nappropriate level or by pressing predefined keys on keyboard. Before \r\nopening a new position, the EA calculates such lot size, which will \r\nguarantee you no more losses on stop loss line, than you previously set \r\nin EA's parameters. You may set this risk controlling values in % of \r\nyour deposit or as a fixed money amount in deposit currency.

\r\n

This is a demo version

\r\n

This is a demo version of Trader Control Panel. It was created because this EA is managed by mouse clicks and movements and/or pressing keys on keyboard which is completely ignored by the tester. That is why you cannot test it in the tester. This demo version has the same code as an original expert, except one key point - it does not open and close positions. So you may test all EA's behavior but cannot trade with it. Such demo mode gives you the ability to test TCP and make a conscious decision if it is good for you, before buying or renting it. Trader Control Panel full version and its complete description are available here.

\r\n

General TCP usage scenario

\r\n

Fill in Market Watch with symbols you want to see in Dashboard.
Set max allowed risk for any opening position in account currency (Risk value<0) or in % of currently available balance (Risk value>0).
Switch to symbol you want trade by clicking it in Dashboard.
Show Minicharts for other periods to analyze price moving trend.
Define where you want to place StopLoss if you open a position now.
Open position by clicking price column in Dashboard and then - set StopLoss line. Or use Insert and Up/Down arrow keys for this.
When position will reach your goal – close it by clicking “x” button or pressing Del key.

\r\n

Parameters

\r\n

All EA parameters are grouped into three sections according to their functions:

\r\n

TRADING SETTINGS

\r\n

Open StopLoss - max available risk during opening new \r\nposition. If Open StopLoss > 0 – its value treated as % from balance.\r\n If Open StopLoss < 0 – money in deposit currency.
Price deviation during open - price deviation during open.
StopLoss step moving by keyboard - StopLoss step size in points for moving position stop loss line by keyboard (arrows Up and Down).
Autoset TakeProfit multiplier of StopLoss Size - distance\r\n multiplier for auto setting take profit for opening a position. Set it \r\nto 0 if you want to open a position without initial take profit (you may\r\n set it later).
Use keys - enable/disable the keyboard (INS – open, DEL – close, 1-9 – partial close).

\r\n

PANEL SETTINGS

\r\n

Symbols in panel - symbols quantity (from top of the Market Watch) to be shown in TCP panel.
Background - TCP dashboard background color.
Text - TCP dashboard text color.
Borders - TCP dashboard borders color.
Zoom factor - scale to magnify dashboard in Tablet mode.
Use mini charts - Use or not minicharts. When false, the zoom button is also hiding, but you can toggle the table mode from keyboard by pressing Z key.

\r\n

OPEN POSITIONS COLORS

\r\n

Background - TCP dashboard background color.
Loss text - TCP dashboard text color for position with profit < 0.
Profit text - TCP dashboard text color for position with profit > 0.
Protected profit bar - TCP dashboard text color for position with protected profit > 0.

\r\n

Warning: Trader Control Panel does not work in the tester \r\nbecause it completely ignores all mouse and keyboard events which are \r\ncore of this expert engine.

\r\n

So, there are three ways to decide if is it good for you or not:

\r\n

Trust my descriptions and promising.
Try TCP demo version, which does all stuff, except real executing commands to open and close order.
Rent the EA for one month (I set minimal price for this case) and test it in your real conditions.

", "url": "https://www.mql5.com/pt/market/product/29844", "small_icon": "https://c.mql5.com/31/249/trader-control-panel-demo-logo-60x60-5773.png", "middle_icon": "https://c.mql5.com/31/438/trader-control-panel-demo-logo-140x140-7294.png", "icon": "https://c.mql5.com/31/249/trader-control-panel-demo-logo-200x200-3934.png", "rating": 5, "price": 0, "published": 1528385874, "popularity": 0.008434065894944212, "category": "Utility", "votes": 1 }, { "id": 29693, "title": "Trader Control Panel", "description": "

TCP - Trader Control Panel is an extension to build into MetaTrader 5 manual methods to control open positions. It adds opening and closing position feature as well as user-friendly monitoring dashboard, money and risk management when opening. Opening and closing positions are done by mouse by interactively placing stop loss line on appropriate level or by pressing predefined keys on keyboard. Before opening a new position, the EA calculates such lot size, which will guarantee you no more losses on stop loss line, than you previously set in EA's parameters. You may set this risk controlling values in % of your deposit or as a fixed money amount in deposit currency.

\r\n

General TCP usage scenario

\r\n

Fill in Market Watch with symbols you want to see in Dashboard.
Set max allowed risk for any opening position in account currency (Risk value<0) or in % of currently available balance (Risk value>0).
Switch to symbol you want trade by clicking it in Dashboard.
Show Minicharts for other periods to analyze price moving trend.
Define where you want to place StopLoss if you open a position now.
Open position by clicking price column in Dashboard and then - set StopLoss line. Or use Insert and Up/Down arrow keys for this.
When position will reach your goal – close it by clicking “x” button or pressing Del key.

\r\n

Parameters

\r\n

All EA parameters are grouped into three sections according to their functions:

\r\n

TRADING SETTINGS

\r\n

Open StopLoss - max available risk during opening new position. If Open StopLoss > 0 – its value treated as % from balance. If Open StopLoss < 0 – money in deposit currency.
Price deviation during open - price deviation during open.
StopLoss step moving by keyboard - StopLoss step size in points for moving position stop loss line by keyboard (arrows Up and Down).
Autoset TakeProfit multiplier of StopLoss Size - distance multiplier for auto setting take profit for opening a position. Set it to 0 if you want to open a position without initial take profit (you may set it later).
Use keys - enable/disable the keyboard (INS – open, DEL – close, 1-9 – partial close).

\r\n

PANEL SETTINGS

\r\n

Symbols in panel - symbols quantity (from top of the Market Watch) to be shown in TCP panel.
Background - TCP dashboard background color.
Text - TCP dashboard text color.
Borders - TCP dashboard borders color.
Zoom factor - scale to magnify dashboard in Tablet mode.
Use mini charts - Use or not minicharts. When false, the zoom button is also hiding, but you can toggle the table mode from keyboard by pressing Z key.

\r\n

OPEN POSITIONS COLORS

\r\n

Background - TCP dashboard background color.
Loss text - TCP dashboard text color for position with profit < 0.
Profit text - TCP dashboard text color for position with profit > 0.
Protected profit bar - TCP dashboard text color for position with protected profit > 0.

\r\n

Warning: Trader Control Panel does not work in the tester because it completely ignores all mouse and keyboard events which are core of this expert engine.

\r\n

So, there are three ways to decide if is it good for you or not:

\r\n

Trust my descriptions and promising.
Try TCP demo version, which does all stuff, except real executing commands to open and close order.
Rent the EA for one month (I set minimal price for this case) and test it in your real conditions.

", "url": "https://www.mql5.com/pt/market/product/29693", "small_icon": "https://c.mql5.com/31/249/trader-control-panel-logo-60x60-3329.png", "middle_icon": "https://c.mql5.com/31/446/trader-control-panel-logo-140x140-6360.png", "icon": "https://c.mql5.com/31/249/trader-control-panel-logo-200x200-4548.png", "rating": 0, "price": 130, "published": 1528385869, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29799, "title": "RenkoChartsDemo", "description": "

This is a demo version of a non-trading expert, which utilizes so called the custom symbols feature (available in MQL as well) to build renko charts based on historical quotes of selected standard symbol and to refresh renko in real-time according to new ticks. Also it translates real ticks to the renko charts, which allows other EAs and indicators to trade and analyze renko.

\r\n

Place the EA on a chart of a working instrument. The lesser timeframe of the source chart is, the more precise resulting renko chart is, but the lesser number of boxes will be generated. This is so because available history is limited by the constant Max bars in chart in the terminal settings. The larger the source timeframe is, the deeper history is used for renko generation, but the lesser quality it has. This reduced accuracy of renko affects only regions generated from history, but all live changes of quotes (provided RenkoChartsDemo is running) generate absolutely accurate boxes - even more accurate than generated from M1 history.

\r\n

The generated renko chart uses M1 timeframe. The start time of a \"minute\" bar corresponds to the start time of renko box. The end time of a such \"minute\" bar is dummy (MetaTrader does not allow for bars with different timespan), instead you should look at start time of the next \"minute\" bar. It makes no sense to switch the renko chart to a timeframe other than M1.

\r\n

After its placement on a source chart, RenkoChartsDemo starts to generate missing renko bars for a custom symbol and shows a comment like this:

\r\n

Processing bar: i / N

\r\n

where i - number of a current bar being processed on the source timeframe (the numbering goes from maximum to 0), and N - total number of bars.

\r\n

When the process is finished, the comment reads like this:

\r\n

RenkoChart (100pt): open EURUSD_M1_renko / 10000 bars

\r\n

where 100pt is the renkobox size in points, EURUSD_M1_renko is the custom symbol name (for both see description below), and 10 000 is total number of generated boxes (if the EA is running the very first time, this is actual number of renko bars, but if it continues from some previous results, for example, after the terminal restart, the number of new boxes can be a few, because only most recent, missing boxes are generated).

\r\n

RenkoChartsDemo opens one renko chart for you, but you can open more.

\r\n

RenkoChartsDemo generates custom symbol quotes, thus you may open many charts with it and apply different trading EAs and indicators. It makes no sense to run multiple RenkoChartsDemo with the same work symbol/timeframe/renkobox size. It is not allowed to run multiple RenkoChartsDemo with the same custom symbol name.

\r\n

Due to technical limitations in MetaTrader 5, renko charts can demonstrate strange behavior under some circumstances. You may find details in the Comments section of the full version.

\r\n

RenkoChartsDemo works with EURUSD M1 only. The utility does not work in the tester.

\r\n

Parameters

\r\n

RenkoBoxSize - renkobox size in points, by default - 100;
ShowWicks - enable/disable wicks on renko, by default - true;
EmulateOnLineChart - enable/disable ticks emulation on the renko chart, by default - true; it allows other EAs to trade online from the renko chart;
OutputSymbolName - name of the custom symbol for renko, by default - empty string - then the name is formed as \"Symbol_Period_Type_Size\", where Symbol - current work symbol, Period - current timeframe, Type - \"r\" (renko) if wicks are enabled or \"b\" (brick) if disabled, Size - RenkoBoxSize; example: \"EURUSD_M15_r100\";
Reset - option to enforce complete recalculation of entire renko chart, by default - false; after it is set to true and calculations are completed, it is recommended to reset it back to false in order to eliminate excessive recalculations on every terminal restart; this mode is helpful in rare cases, when generated renko chart contains an error for some reason; normally the option is disabled, because the EA continues calculation smartly from most recent existing box;
Throttle - minimal period in seconds between ticks (by default - 0, throttling is disabled);
CloseTimeMode - when true, boxes are shown and formed at M1 close time; in this mode, only one tick is generated per box, when box is added completely formed to a chart; by default - false, i.e. boxes are created at M1 open time.

", "url": "https://www.mql5.com/pt/market/product/29799", "small_icon": "https://c.mql5.com/31/248/renkochartsdemo-logo-60x60-7096.png", "middle_icon": "https://c.mql5.com/31/441/renkochartsdemo-logo-140x140-4807.png", "icon": "https://c.mql5.com/31/248/renkochartsdemo-logo-200x200-6225.png", "rating": 0, "price": 0, "published": 1528305225, "popularity": 0.20477939595465364, "category": "Utility", "votes": 0 } ], "total": 26680 }

Milhares de robôs de negociação, indicadores e outros aplicativos prontos para fazer operações de negociação

Preços

Doji Engulfing Paths Mt5 Demo

Lib5 EAPadPRO for MT5

Open Interest for tester MT5

EA Sato MT5

Theobaldo Mini indice

NR7 and NR7IB

OrderBook Cumulative Indicator

OrderBook History Playback

OrderBook Recorder

OrderBook History Library

Excessive Momentum Indicator MT5

Renko Charting for MT5

RSI talking to save your eyes

CME Exchange margin zones

LevelPAttern MT5

MMM Bollinger Bands MACD and MA

Synthetic full

Fibonacci Manager by Investio

Gauge Classic Series

Important Lines

CloneChartMT5

MultiCurrency Spread Trend EA

Demo Information panel for traders

Information panel for traders

TrendSwing

Snake EURUSD

TSO Price Channel MT5

PlugnTrade Si

Copy MT5 MT5 demo

Copy MT5 MT5

SRFactor mt5

Advanced Stochastic Scalper MT5

R747 BreakLevels MT5

Neural

CheckOnlineStatus

Triton

Ultimate Double Top Bottom Scanner MT5 FREE

Ultimate Double Top Bottom Scanner MT5

Fractals true extremums MT5

AQ RiskOptimizer MT5

BB Trend Indicator

DTN EA For XAU MT5

CrossCorrelation

TrendStar

Signal Noise Indicator

PZ Multi Oscillator MT5

AirShip

Fractals Direction ST Patterns MT5

SeasonalEA

Pointer synchronization MT5

ClassicTrader

Demo Creating orders with a fixed stop in dollars

Creating orders with a fixed stop in dollars

MMM High Low

DynamicStep

Unison Song

Auto Fibo with smart Trend Detection

VR Atr Pro MT5

RMI Scalper EA

Url HTML and XML to CSV Mt5 Demo

AvgVolumes

Market Grid View

Lines for MT5

Calc for MT5

Ultimate Double Top Bottom Indicator MT5 FREE

Ultimate Double Top Bottom Reversal Indicator MT5

Strong Trends With Magic Entries MT5

MMM Ichimoku Kinko Hyo

MMM Adx PSar and MA

Trader Control Panel DEMO

Trader Control Panel

RenkoChartsDemo