{ "from": 3672, "count": 72, "list": [ { "id": 28514, "title": "ForexGenerated", "description": "

The ForexGenerated Expert Advisor works based on short-term changes in the trend, creating the price \"corridor\" set in the parameters. Trading is carried out at the external borders of this corridor by opening positions in different directions with different lot sizes. This achieves a very high probability of closing positions in profit.

\r\n

ForexGenerated is intended for trading any currency pair on the M5 timeframe or higher. However, backtests indicate that it is best suited for NZDUSD on M5.

\r\n

Customizable Indicator parameters

\r\n

Amount for a new position - Lot size to enter a new position.
Maximum position amount - Maximum amount of lot size of opened positions.
Amount to add on addition - Amount/lot size added on the position.
Amount to close on reduction - Amount/lot size reduced.
Stop Loss - Set a Stop Loss where you want.
Take profit - Set the Take Profit where you want.
Break Even - Set the Break Even point.
Martingale Multiplier - 0 is switched off.
Momentum 1 period - Period of Momentum 1.
Momentum 2 period - Period of Momentum 2.
Stop trading at min account - Stops trading at a given account level.
Ensure maximum Stop Loss - Set maximum loss.
Custom order comment - Write a custom comment to the orders opened by the EA.

\r\n

For accounts with balances $500+ you can leave the settings as is. For smaller accounts, e.g. $100, we recommend the following settings:

\r\n

Amount for a new position [lot]: 0.01
Amount to add on addition [lot]: 0.01
Amount to close on reduction [lot]: 0.01

", "url": "https://www.mql5.com/pt/market/product/28514", "small_icon": "https://c.mql5.com/31/239/forexgenerated-logo-60x60-1431.png", "middle_icon": "https://c.mql5.com/31/440/forexgenerated-logo-140x140-1021.png", "icon": "https://c.mql5.com/31/239/forexgenerated-logo-200x200-1413.png", "rating": 0, "price": 30, "published": 1523987304, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28536, "title": "IndCorrelationTable", "description": "

IndCorrelationTable

\r\n \r\n

\r\n

Ind Correlation Table\r\n - projetado para ajudar um negociador no mercado Forex usando o método \r\nbaseado na dependência de correlação de pares de moedas. A dependência \r\nde correlação entre dois instrumentos é calculada através do coeficiente\r\n de K. Pearson e C. Spearman. A principal função da tabela é produzir um\r\n sinal formalizado sobre a possibilidade de abrir uma \"cesta\" de \r\ntransações de acordo com parâmetros pré-definidos, bem como a direção \r\ndas transações de acordo com a estratégia. Se for necessário notificar \r\noutros dispositivos, o sinal pode ser duplicado via notificações push, \r\nbem como via e-mail.

Aplicação:

Cálculo do coeficiente de correlação (a conversão é realizada no fechamento da vela).
Para trabalhar nos parâmetros de entrada do indicador, os valores limite recomendados já foram definidos.
\r\n Para aumentar o número de sinais, você pode aplicar uma tabela em \r\nvários períodos de tempo simultaneamente (intervalos de tempo \r\nrecomendados de M15 a H1).

Parâmetros do Indicador

Símbolos (1,2,3) - listas de cestas de pares de moedas (restrição do número de cestas inseridas em uma lista 17).
TimeFrame - período de tempo.
PeriodPearson - o valor do período para calcular o coeficiente de Pearson.
PeriodSpearmen - o valor do período para o cálculo do coeficiente de Spearman.
NegativeCorrelationLevel - valor limite da correlação negativa.
AddPrice - parâmetro de cálculo.
RsiPeriod é o período do indicador RSI.
DeltaRsiPearson - indicador delta RSI, valor limite para \"Alerta\" através do cálculo de Pearson.
DeltaRsiSpearman - indicador delta RSI, valor limite para \"Alerta\" através do cálculo de Spearman.
DeltaRsi - indicador delta RSI, valor limite para alteração de cor.
CointegrationLevel - indicador delta Cointegração, o valor limite.
UseAlert - saída \"Alerta\" na tela.
UseSendMail - envie \"Alerta\" para o e-mail.
UseSendNotification - enviando notificações push para dispositivos móveis.
TemplateName - o nome do modelo chamado com software pré-instalado.

\r\n Se todos os valores limite de um dos cálculos (em um tick) forem \r\nexcedidos, o nome do cesto muda de cor (sinal para entrar no mercado). \r\nQuando todos os limites de um dos cálculos (em uma barra fechada) são \r\nexcedidos, um sinal é inserido para entrar no mercado (alerta via \r\n\"Alerta\").

PS Chamada de dois \r\ngráficos de pares de moedas é realizada por passar o mouse sobre o nome \r\nda cesta de moedas e pressionando o botão esquerdo do mouse \r\nsimultaneamente com a tecla \"Ctrl\" pressionada. O modelo deve ser \r\ncolocado na pasta \"Arquivos\".

", "url": "https://www.mql5.com/pt/market/product/28536", "small_icon": "https://c.mql5.com/31/267/indcorrelationtable-logo-60x60-9648.png", "middle_icon": "https://c.mql5.com/31/445/indcorrelationtable-logo-140x140-8335.png", "icon": "https://c.mql5.com/31/267/indcorrelationtable-logo-200x200-4250.png", "rating": 0, "price": 35, "published": 1536268624, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 28576, "title": "Flat Martingale MT5", "description": "

This robot is based on martingale logic but with flat lot size increment and limiting the opening trade frequency to avoid big risk due to this logic.

\r\n

The positions are opened in both direction without setting Take Profit and Stop Loss.

\r\n

Stop Loss is set only in case of running a positive trade and will be trailed.

\r\n

The closure of all the opened positions is done by robot when the target profit is reached.

\r\n

Suggested period is M1, but it also works with others.

\r\n

Can be used on all pairs using default parameter as suggestion (just verify the spread applied to your broker to adjust the filter parameter). But before that, it is strongly suggested to follow the recommendations below.

\r\n

Parameters

\r\n

targetProfit: amount in account currency that will trigger the closure of all the positions.
commissionFactor: factor to calculate the commission on running positions as formula lotSize*commissionFactor (use the proper value based on your broker account).
pipsDistance: amount in pips that will trigger opening of new positions (suggested minimum value 200).
trailDistance: amount in pips that will trigger trailing when negative trades not running.
initialLotSize: initial size of lot to be opened.
slippage: slippage set during position opening.
allowedSpread: max spread allowed to open positions.
stopTrading: if true the robot will stop opening new positions in case there are no positions at all to be closed.

\r\n

Recommendations

\r\n

Do backtest of good quality (at least 99.9%) if you can.

\r\n

Control the risk and work with appropriate volumes (lots) to your capital according the backtest results.

\r\n

Be careful because a parameter setting too aggressive (pipsDistance too low and initialLotSize and/or targetProfit too high) could burn your account!

", "url": "https://www.mql5.com/pt/market/product/28576", "small_icon": "https://c.mql5.com/31/235/flat-martingale-logo-60x60-8155.png", "middle_icon": "https://c.mql5.com/31/441/flat-martingale-mt5-logo-140x140-6596.png", "icon": "https://c.mql5.com/31/235/flat-martingale-logo-200x200-9081.png", "rating": 0, "price": 180, "published": 1523524116, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28611, "title": "Perforation Modify", "description": "

One of the main goals in the development of this Expert Advisor was ease of use. As a result, this EA has a minimum of parameters, which are easy to understand. At the same time, it is very flexible and customizable for almost for any instrument (currency pair).

\r\n

The logic

\r\n

According to the given algorithm, the EA determines local support and resistance levels (at startup, the previous quotes are disregarded). When a candle closes beyond any level, a deal is opened in the same direction. By default, take profit and stop loss are set at a ratio of 1:1, but you can change this in the parameters, if necessary. The maximum number of simultaneously open deals is 3. This is a safety measure, which prevents opening a lot of deals against when it reverses. If the price breaks through the resistance level and continues to move in the same direction, the EA will monitor the formation of a new support level. If it is formed, the deal will be modified - stop loss will be moved closer to the support level. Such manipulation allows minimizing losses. You can also use the trailing stop settings to protect profitable deals. You can also enable filtering of deals using the ADX indicator.

\r\n

Parameters

\r\n

UseADX - if true, trade filtering is enabled; false - ADX is not used.
StartHour - hour to start working in the active mode.
StartMinute - minute to start working in the active mode.
StopHour, StopMinute - time to stop working and to switch to standby mode. For trading around the clock, set all parameters to 0.
TrailPoints - the number of points in profit to modify a deal.
SLTrail - the number of points for breakeven. Trailing will be triggered only when a new candle is formed.
NoModSell - when set to true, open sell deals will not be modified when a new support level is formed. If set to false, there are no restrictions on the modification.
NoModBuy - the same logic as in the previous parameter. Only for buy deals.
Intellect - allow the EA to automatically make decisions on the modification of deals. Set to true to activate, set it to false to disable. In most cases, the use of this parameter has a good effect.
ProfitPlus - the stop loss and take profit are set a ratio of 1:1 by default. This parameter allows increasing the take profit value by the specified number of points relative to stop loss.
Lot - volume for every deal. The volume is fixed.

\r\n

I hope you will agree that it is quite easy to understand these parameters.

\r\n

Please note that quotes of different brokers may vary. So the results can be different.

\r\n

Be sure to test, combine the parameters, optimize before use and the results will not keep you waiting.

\r\n

Have a happy trading.

", "url": "https://www.mql5.com/pt/market/product/28611", "small_icon": "https://c.mql5.com/31/235/perforation-modify-logo-60x60-3574.png", "middle_icon": "https://c.mql5.com/31/446/perforation-modify-logo-140x140-1428.png", "icon": "https://c.mql5.com/31/235/perforation-modify-logo-200x200-1810.png", "rating": 0, "price": 55, "published": 1522171458, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28749, "title": "EA Sato MT5", "description": "

Sato - smart automatic trading robot, which makes trend transactions using up to 15 trend indicators. The robot is \r\ndeveloped on the basis of a real trading strategy.

\r\n

Very easy to configure, does not require special knowledge. You can quickly start trading using the default settings. The robot is optimized \r\nfor 26 currency pairs and does not need optimization.

\r\n

Stop-loss and take-profit are established for each order, and also various methods of order modifications are used.

\r\n

Monitoring: https://www.mql5.com/ru/signals/author/profi_mql

\r\n

МetaТrader 4 version: https://www.mql5.com/en/market/product/30744

\r\n\r\n\r\n

\r\n

Attention! This EA is only for \"hedging\" accounts.

\r\n

\r\n\r\n\r\n

\r\n

Does not use scalping, averaging, martingale, grid and other risky strategies.

\r\n

\r\n\r\n\r\n

\r\n

\r\n\r\n\r\n

Multi_Currency_BackTest - if set to true, a multi-currency tester is used. If false, \r\n the current currency and timeframe are used.

\r\n

For quick test, use:

\r\n\r\n\r\n

Tick simulation methods:

M1 OHLC (simulation of 1-minute bars, OHLC prices) or Open price only (quick method on \r\n complete bars).

\r\n

\r\n\r\n\r\n

Pairs and Timeframe

\r\n\r\n\r\n

EURUSD
GBPUSD
GBPJPY
USDCHF
USDJPY
AUDUSD
GBPAUD
USDCAD
GBPCAD
EURAUD
EURCAD
EURGBP
EURJPY
GBPCHF
NZDUSD
GBPNZD
EURCHF
AUDCAD
NZDCAD
NZDCHF
NZDJPY
CHFJPY
CADJPY
CADCHF
AUDNZD
EURNZD

\r\n

\r\n\r\n\r\n

Requirements and Recommendations

\r\n\r\n\r\n

It is recommended to install the EA on one chart, you can enable and disable currencies in the settings.
The minimum recommended balance for the EA's use with the recommended pairs - $300 or $3 on a cent account.
5-digit brokers.
VPS.

\r\n

\r\n\r\n\r\n

Parameters

\r\n\r\n\r\n

EURUSD - if true, use EURUSD;
...
EURNZD - if true, use EURNZD;
Symbols_Prefix(Suffix)_Name - enter the prefix (suffix) ONLY if the name of the symbols uses a suffix (for example: \r\n \"m.\"(\".m\") if the symbol name is \"m.EURUSD\"(\"EURUSD.m\"));
Use_Risk_StopLoss - The risk-based stop loss.

Custom_balance - FreeMargin = false or Balance = true.
Percentage Risk — interest risk based on stop loss.

Fixed_Lot - fixed lot ( if Use_Risk_StopLoss - false);
Order Type - trading direction;
Magic - trades ID.
Order Comment — order comment.
Slippage - allowed slippage before an order is triggered;
Show_Info_Panel - use the information panel (false - faster backtest);
Show_additional_panel - use the info panel for profit indicator per each month, for backtest only;
Multi_Currency_BackTest:

true - use the multi-currency tester;
false - use the current currency and timeframe;

Adaptation of the spread to the stop loss - adapt the stop loss to spread;
Max Spread EURUSD - maximum allowed spread EURUSD;
...
Max Spread EURNZD - maximum allowed spread EURNZD;
Stop trade - disable trading for a certain time (from 5 minutes to 24 hours) if the average spread exceeded \r\n Max_Spread;

\r\n

Trading within the week:

\r\n\r\n\r\n

Monday - trade on Monday;
...
Friday - trade on Friday.

\r\n

Time trading within a day:

\r\n\r\n\r\n

Use time - if true, the EA trades by time;
GMT_mode - GMT settings; (0 - disabled);
Every_Day_Start - operation start time (hh:mm);
Every_Day_End - operation end time (hh:mm).

Time to disable on Friday:
\r\n\r\n\r\n

Use time - if true, the EA trades by time;
Disable_in_Friday - operation end time on Friday (hh:mm).

\r\n

", "url": "https://www.mql5.com/pt/market/product/28749", "small_icon": "https://c.mql5.com/31/258/ea-sato-mt5-logo-60x60-2876.png", "middle_icon": "https://c.mql5.com/31/439/ea-sato-mt5-logo-140x140-7503.png", "icon": "https://c.mql5.com/31/258/ea-sato-mt5-logo-200x200-1636.png", "rating": 1.5, "price": 70, "published": 1532688267, "popularity": 0, "category": "Expert", "votes": 2 }, { "id": 28761, "title": "ReversMartinTral", "description": "

Those familiar with chess-playing robots that successfully defeat grandmasters, know very well what a complex and large card catalog is.

As a result, the Expert Advisor's algorithm is based on 320 reversal and 302 flat patterns formed by day candles on 7 major currency pairs, displayed on screenshots ( EURUSD_i, GBPUSD_i) from 12.01.2012 to 04.22.2018 (account currency USD, \"Every tick\" test mode, M1, MetaTrader 5).

Positions are opened by analyzing the current and previous day candles with impulse sorting by the last minute candles.

Profitable positions are accompanied by a trailing emulator (virtual trailing).

Loss-making positions are dealt with by the grid martingale. In case there are signs of a trend reversal, the reverse martingale is enabled.

A small information panel shows the final or current (negative) financial result of the EA's trading.

The EA applies the orders netting. If the reversal is loss-making (the value on the panel is red), trades are balanced and accounted for before the entire martingale trade series finds itself in a breakeven.

The control parameters feature money management as a financial stop and lot size management (fixed starting lot or auto management of a starting lot based on a deposit size).

Some values of magic numbers (current value + 1, current value + 2, current value + 3 and current value + 4) are forbidden when other EAs are used in the terminal since the values take part in the EA calculations (5 magic numbers).

Parameters

SLIPPAGE - slippage (in points) 100
SPREAD - spread limitation (in points) 100
LOT - starting lot 0.01
AUTO_LOT - lot type used for trading: fixed lot or autolot (in % of the deposit)
SB - starting deposit for auto lot 200
NE - trailing emulator (if 1: stop = 100 point, step = 50 point) 1.30
ZQC - constant for step calculation (multiplied by volatility) 250
KM1 - averaging lot exponent (1 - double the lot size) 0.0
KM2 - averaging step exponent (2 - double the step) 1.0
KM3 - reverse lot exponent (3 - double the lot size) 2.7
STOP - financial stop
RSTOP - financial stop value 100
MAGIC_NUMBER - magic number 100

Past profits do not guarantee future ones, therefore I recommend conducting the automated trading by a fixed starting lot on tested currency pairs.

The initial drawdown by the financial stop is set to 50% (100) of the starting deposit (200), but in case of a fixed lot, it remains an absolute value, which allows maintaining a stable EA operation even with a certain number of stop losses.

", "url": "https://www.mql5.com/pt/market/product/28761", "small_icon": "https://c.mql5.com/31/240/reversmartintral-logo-60x60-6662.png", "middle_icon": "https://c.mql5.com/31/445/reversmartintral-logo-140x140-8363.png", "icon": "https://c.mql5.com/31/240/reversmartintral-logo-200x200-2330.png", "rating": 0, "price": 100, "published": 1525363805, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28784, "title": "Hedge MA", "description": "

Hedge MA is both a moving average cross EA and hedging EA, designed to recover a loss of a losing trade by opening an opposite trade, or more, if necessary. If the initial trade will be lost, the hedge trade will win. If the initial trade wins, then the hedge trade might not even get triggered and will be cancelled.

\r\n\r\n

The EA is designed for МТ5 hedge accounts.
Recommended account - cent МТ5 hedge, at least 15000 USD cents ($150), leverage - 1:500.
Recommended timeframe - М5.
The default settings are optimized for the EURUSD pair.
For better visualization, it is recommended to attach the ATR indicator with the period of 2 to the chart.

\r\n

Trading strategy

\r\n\r\n

The EA opens a sell order when price crosses 100-day moving average below.
The EA opens hedge trades when your original trade reaches a certain predetermined loss point.
An opposite order is opened after a specified Delta distance 50 pips with the volume increased.

\r\n

EA parameters

\r\n

Timeframes: The timeframe on which the EA should work regardless what timeframe your chart is set to.

\r\n

Moving average

\r\n

Moving_Average_period: Averaging period of the Moving Average (default 100).
MA_SHIFT: The indicator shift relative to the chart (default is 0).
MA_METHOD: The methods of the price series.

\r\n

Hedge

\r\n

Initial_LOT: initial lot size.
Hedge_LOT_1: the lot Size of the first hedge trade (order opposite).
Hedge_LOT_2: the lot Size of the second hedge trade.
Distance_Recovery: distance between orders (50 points).
Initial_TP: Take Profit of initial trade.
Hedge_TP_1: Take Profit of the first hedge trade.
Hedge_TP_2: Take Profit of the second hedge trade.

", "url": "https://www.mql5.com/pt/market/product/28784", "small_icon": "https://c.mql5.com/31/238/hedge-plus-logo-60x60-6406.png", "middle_icon": "https://c.mql5.com/31/439/hedge-ma-logo-140x140-2643.png", "icon": "https://c.mql5.com/31/238/hedge-plus-logo-200x200-4530.png", "rating": 0, "price": 149, "published": 1523450399, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28790, "title": "MMM RVI and MA", "description": "

The strategy is based on RVI osculation to check the prices trend and direction and check the moving averages (Open Price and Low Price) to decide about the viability of opening any order. Market is very unpredictable due to economic news published every hour, but our EAs are really prepared for such hostility due to its protections.

\r\n

This Expert Advisor is provided with two kinds of indicators:

\r\n

an oscillator (RVI) in order to check the prices osculation limit pattern and direction trend;
two Moving Averages where one checks the Open Price average and the other check the Low Price average and verifies if the asset current price is above or under or between the MAs in order to decide wether or not to open the indicated type of order;

\r\n

It protects your money because it is provided with:

\r\n

trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
Spread value limit to prevent opening an order at a high Spread value. Usually brokers uses variable Spread values;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
Stop Out level to close all your pending orders after reaching a certain equity percentage low level. Some brokers do not do it automatically.
limits the number of pending orders. This way you will not bankrupt your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (order open time).

\r\n

Attention! The default input values are already optimized for EURUSD at timeframe M15 for a Hedge account and leverage 1:500. Always use the strategy tester optimization to set the best values for your assets and time frame. It is very important and strongly recommended for successful trading. So let's do it right by optimizing the input values as your needs.

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: closes any order after reaching profit define in currency value;
Take profit (order profit ceiling): traditional take profit (pips);
Stop loss (loss limit): traditional stop loss (pips);
Lots volume to trade: the lots volume to be traded;
Trailing stop loss: trailing stop loss distance. If input an invalid distance, the minimum distance allowed by market will be used. Disabled if = 0 (ZERO);
Maximum number of simultaneous orders: limits the number of pending orders;
Minimum equity percentage to allow opening new orders: defines the equity minimum percentage to open new orders;
Maximum Spread allowed for operations: limits the spread value to open new orders;
Magic Number: identifies the orders opened and administrated by this EA;

\r\n

Bad time to trade inputs:

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Lot Size Variance Inputs:

\r\n

Double Lots on Gain: doubles the lot volume to trade. Some people love it. Disabled if = false.
Maximum Lot Size Allowed: defines a maximum limit the lots volume may Increase. If limit reached, the size goes back the the minimum volume allowed by Market.

\r\n

Indicator's inputs:

\r\n

RVI:

\r\n

RVI Period: defines the RVI period;
RVI level UP: defines the RVI upper level;
RVi level DOWN: defines the RVI lowest level;

\r\n

Moving Averages:

\r\n

Open Price Moving Average Period: defines the Open Price MA period;
Low Price Moving Average Period: defines the Low Price MA period;

\r\n

Account Security input:

\r\n

Equity Percentage to STOP OUT: defines the equity lowest level percentage to close all pending orders.

\r\n

", "url": "https://www.mql5.com/pt/market/product/28790", "small_icon": "https://c.mql5.com/31/237/mmm-rvi-and-ma-logo-60x60-9959.png", "middle_icon": "https://c.mql5.com/31/446/mmm-rvi-and-ma-logo-140x140-9216.png", "icon": "https://c.mql5.com/31/237/mmm-rvi-and-ma-logo-200x200-2320.png", "rating": 0, "price": 130, "published": 1523295095, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28796, "title": "Multi Chart Refresh Mt5", "description": "

Multi Chart Refresh Mt5, é um script rápido, suave e indispensável que permite atualizar vários gráficos simultaneamente a partir de um mesmo. A multitarefa torna isso possível, pois você pode escolher antecipadamente quais símbolos deseja atualizar.

Como funciona?

Abra qualquer gráfico, arraste o script do navegador e solte-o no gráfico. Defina os símbolos desejados e clique em OK, pronto! Observe que este é um script e não um consultor especialista, o programa se remove do gráfico quando a tarefa é concluída. Informações detalhadas no diário do terminal são impressas sobre quais símbolos foram atualizados com a quantidade desejada de barras e aqueles que não foram. Não poderia ser mais fácil do que isso!

Configurações do menu de script

Seleção de símbolos - Configure seus símbolos desejados
Prefixo do símbolo - Insira o prefixo do símbolo, se existir, apenas o prefixo!
Sufixo do símbolo - Insira o sufixo do símbolo, se existir, apenas o sufixo!
Atualizar gráfico(s) com quantas barras? - Configure quantas barras para atualizar / gráfico

", "url": "https://www.mql5.com/pt/market/product/28796", "small_icon": "https://c.mql5.com/31/737/multi-chart-refresh-mt5-logo-60x60-8891.png", "middle_icon": "https://c.mql5.com/31/737/multi-chart-refresh-mt5-logo-140x140-3178.png", "icon": "https://c.mql5.com/31/737/multi-chart-refresh-mt5-logo-200x200-7661.png", "rating": 0, "price": 40, "published": 1653326680, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 28902, "title": "RoundLock EA MT5", "description": "

O Round Lock é um consultor inteligente com bloqueio dinâmico de posições. O Round Lock é um consultor inteligente com a função de bloqueio dinâmico de posições, um consultor de negociação avançado que implementa uma estratégia de bloqueio de ordens bidirecional com crescimento gradual de posições e adaptação dinâmica ao mercado .

Vantagens da fechadura redonda:

Controle de risco por meio de bloqueio de posição,

Crescimento dinâmico de volumes em áreas de tendência do mercado,

Configurações de comportamento flexíveis dependendo dos limites,

Adequado para fases planas e de tendência, otimizando o resultado em cada situação,

Automação de estratégia de média e abordagem de grade com mecanismo de proteção.

Versão MT4 -> AQUI / Solução de problemas -> AQUI

O consultor abre duas ordens em direções opostas. Quando uma delas é fechada com lucro, duas ordens são reabertas, e o volume de ordens aumenta dependendo do volume do multiplicador Multiplier_Volume e do número de ordens abertas pelo consultor. Em cada novo par aberto, ordens são abertas com o mesmo volume, bloqueando-se mutuamente. A abertura de pares continua até que o número de ordens do mesmo tipo atinja o número Limit_for_orders, após o qual o consultor apenas aumentará a grade, excluindo o bloqueio.

Como funciona o Round Lock:

O consultor abre um par de ordens opostas (compra/venda), fixando assim a posição e controlando a volatilidade.
Cada novo par abre somente após uma das ordens do par anterior ser fechada pelo Take Profit .
Dessa forma, a distância entre os grupos de ordens é ajustada automaticamente — devido ao take profit.

Mecânica de extensão inteligente:

A cada nova abertura de pares, o volume de ordens aumenta dependendo do MultiplierVolume especificado e do número de posições abertas anteriormente.
Todos os pares de ordens são simétricos em volume , o que permite uma proteção eficaz contra riscos.
A abertura de novos pares bloqueados continua até que o limite definido seja atingido - Limit_for_Locked_Groups .
Após atingir o limite, o consultor muda para o modo de acumulação unidirecional , abandonando completamente os novos bloqueios e continuando a negociar na direção especificada.

Parâmetros de entrada:

Limit_for_Locked_Groups - o número máximo de ordens do mesmo tipo para abertura de ordens em grupos multidirecionais ,
_Lotes_ - Volume da primeira transação em um grupo de ordens em lotes ,
_ Multiplicador _ - Multiplicador de lote para cada pedido subsequente,
TakeProfit_in_points - o tamanho do take profit, expresso em pontos,
_Mágico_ - Número mágico para identificar ordens do consultor,
Spread_limit_in_points - O spread máximo permitido para abrir uma ordem. Quando medido em pontos,
Maximum_slippage_in_points - Deslizamento máximo permitido em pontos para abertura e fechamento de ordens,
Step_between_average_orders_in_points - Passo da grade de pedidos em pontos,
Font_size_in_panels - Altera o tamanho da fonte no painel,
Comentários_para_pedidos - Comentários sobre pedidos abertos pelo consultor ,
New_Cycle — Permite a abertura de novas ordens após o fechamento,
Short_Trades - Permitir vendas,
Long_Trades - Permitir compras,
Maximum_number_of_orders - O número máximo de pedidos do mesmo tipo permitidos em uma cesta .

", "url": "https://www.mql5.com/pt/market/product/28902", "small_icon": "https://c.mql5.com/31/1911/roundlock-ea-mt5-logo-60x60-9157.png", "middle_icon": "https://c.mql5.com/31/1911/roundlock-ea-mt5-logo-140x140-7398.png", "icon": "https://c.mql5.com/31/1911/roundlock-ea-mt5-logo-200x200-8616.png", "rating": 0, "price": 145, "published": 1523555108, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28957, "title": "Order grid", "description": "

A grid expert with a trained neural network for the GBPUSD currency pair, timeframe H1.

Fully ready to work.

The expert determines the trend and opens a series of orders for each price correction.

It is possible to limit the number of orders in each grid of orders.

To work, you can use a standard lot or a percentage of available funds.

The Expert was tested on an account with a leverage of 1:100, with a different leverage, change the Percentage parameter.

Parameters

PlusB   - minimum profit in points when closing a series of same-type orders, closing an order grid BUY
PlusS    - minimum profit in points when closing a series of same-type orders, closing an order grid SELL
Minus - decrease a take profit when opening a new order
InpStepMinus   - take profit level decrease step for an order grid in points
TakeProfit    - profit in points for the main order grid
StopLoss     - stop loss level for an order grid
Distance - distance for opening the next same-type order in a grid
Lots - starting lot, 0 - use percentage of free margin
Percent    - percentage of free margin for the calculating lots
Use_Total Percent - enable/disable limits on the maximum percentage use Deposit bonuses for all orders grid. Valid for automatic calculation of lots (Percent)
TotalPercent - the maximum percentage of free funds used for all order grids when opening simultaneously
AddB - number of BUY orders in an order grid
AddS - number of SELL orders in an order grid

TimeFrame_NRTR_Open - timeframe of the indicator
Use_NRTR_Open      -  enabling/disabling the indicator
Period_NRTR_Open   - period of the indicator [1-19, step 1]

TimeFrame_NRTR_Open2   - timeframe of the indicator
Use_NRTR_Open2     -  enabling/disabling the indicator
Period_NRTR_Open2   - period of the indicator [1-19, step 1]

TimeFrame_MFI_Open     - timeframe of the indicator
Use_MFI_Open     -  enabling/disabling the indicator
Period_MFI_Open   - period of the indicator [2-35, step 3]

TimeFrame_MFI_Open2     - timeframe of the indicator
Use_MFI_Open2     -  enabling/disabling the indicator
Period_MFI_Open 2    - period of the indicator [2-35, step 3]

Use_ADX    - enabling/disabling the ADX indicator
Period_ADX   - period of the ADX indicator
ADX_Level_Down _BUY - the level of the ADX indicator for BUY orders
ADX_Level_Down_SELL  - the level of the ADX indicator for SELL orders

InpSlip - slippage in points
Magic_1 - magic number of the first grid
Magic_2 - magic number of the second grid

Recommend

EA settings: use the default settings
Symbol: GBPUSD
Timeframe: H1
Minimum deposit: $500

Quotes can vary greatly from one broker to another. I recommend optimizing all the indicators in the Expert Advisor.

", "url": "https://www.mql5.com/pt/market/product/28957", "small_icon": "https://c.mql5.com/31/239/order-grid-logo-60x60-8836.png", "middle_icon": "https://c.mql5.com/31/445/order-grid-logo-140x140-8682.png", "icon": "https://c.mql5.com/31/239/order-grid-logo-200x200-3082.png", "rating": 0, "price": 50, "published": 1523987444, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28968, "title": "MMM RSI x Parabolic SAR", "description": "

This Expert Advisor's main strategy is based on the usage of two kind of indicators: two built-in shifted RSI to measure the asset prices oscillations and a Parabolic SAR to check the prices trends. It combines these indicators signals in order to get stronger signals and ensure the EA will do good trading operations.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
Stop Out level to close all your pending orders after reaching a certain equity percentage low level. Some brokers do not do it automatically.
limits the number of pending orders. This way you will not bankrupt your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (order open time).

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: closes any order after reaching profit define in currency value;
Take profit (order profit ceiling): traditional take profit (pips);
Stop loss (loss limit): traditional stop loss (pips);
Lots volume to trade: the lots volume to be traded;
Trailing stop loss: trailing stop loss distance. If input an invalid distance, the minimum distance allowed by market will be used. Disabled if = 0 (ZERO);
Maximum number of simultaneous orders: limits the number of pending orders;
Minimum equity percentage to allow opening new orders: defines the equity minimum percentage to open new orders;
Equity Percentage to Stop Out: defines the equity lowest level percentage to close all pending orders.
Magic Number: identifies the orders opened and administrated by this EA;

\r\n

Bad time to trade inputs:

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's inputs:

\r\n

RSI:

\r\n

Price applied to RSI: defines the price applied to RSI calculations;
RSI used Period: defines the period used on RSI calculations;
RSI shift: defines the RSI shift used on RSI calculations;
RSI Upper Level: defines the RSI UPPER level;
RSI Lower Level: defines the RSI LOWER level.

\r\n

Parabolic SAR:

\r\n

Parabolic SAR Step: defines price increment step - acceleration factor;
Parabolic SAR Maximum: defines the maximum value of step;
Parabolic SAR Shift: defines the Shift value;

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15 and Netting account mode. Always use the strategy tester optimization to set the best values for your assets and time frame and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as you need.

", "url": "https://www.mql5.com/pt/market/product/28968", "small_icon": "https://c.mql5.com/31/242/mmm-rsi-x-parabolic-sar-logo-60x60-2501.png", "middle_icon": "https://c.mql5.com/31/440/mmm-rsi-x-parabolic-sar-logo-140x140-7163.png", "icon": "https://c.mql5.com/31/242/mmm-rsi-x-parabolic-sar-logo-200x200-7540.png", "rating": 0, "price": 65, "published": 1525440193, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 28973, "title": "Supply and demand", "description": "

O indicador mostra a oferta e a demanda degeneradas pelo volume do tick.

A linha vermelha é a linha de abastecimento.

A linha azul é a linha de demanda.

A linha verde é a linha de volume total.

Situações típicas de leituras do indicador:

o vermelho é mais alto que o azul - a oferta é mais alta que a demanda - o preço está caindo.

o azul é maior que o vermelho - a demanda é maior que a oferta - o preço está crescendo.

as linhas vermelha e azul tendem a cair, mas a azul está acima da vermelha - a demanda prevalece, o preço sobe, mas a volatilidade diminui.

as linhas vermelha e azul tendem a cair, mas as vermelhas são mais altas que as azuis - a oferta prevalece, o preço diminui, mas a volatilidade diminui.

as linhas vermelhas e azuis tendem a subir, mas o azul é mais alto que o vermelho - a demanda prevalece, o preço sobe, a volatilidade aumenta.

as linhas vermelha e azul tendem a subir, mas a vermelha é mais alta que a azul - a oferta prevalece, o preço tende a cair, a volatilidade aumenta.

O indicador também mostra sessões (europeias, asiáticas, americanas) - isso é expresso por uma variação ondulada no volume total (linha verde), oferta e demanda (típica para qualquer par de moedas no gráfico com um período de 15 minutos. 1 hora)

O cruzamento das linhas azul e vermelha sinaliza o equilíbrio entre oferta e demanda, neste momento o preço está no meio de seu movimento.

As capturas de tela serão mostradas cada vez mais claramente.

Margem média - parâmetro de média.

", "url": "https://www.mql5.com/pt/market/product/28973", "small_icon": "https://c.mql5.com/31/239/supply-and-demand-logo-60x60-3778.png", "middle_icon": "https://c.mql5.com/31/442/supply-and-demand-logo-140x140-3941.png", "icon": "https://c.mql5.com/31/239/supply-and-demand-logo-200x200-8739.png", "rating": 5, "price": 50, "published": 1534943440, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 28999, "title": "Universal Signal Dashboard", "description": "

The Universal Signal Dashboard (USD) is a signal dashboard or indicator matrix. It can generate a matrix of signals from values, chart and candle prices, and from the buffer output of almost any technical indicator. However, unlike most dashboards of the same category, USD is configurable based on the inputs provided by the user within the app interface.

\r\n

The tabs (Display, Data, and Signals tabs) starts empty and the Display tab will show more display entries as the user adds more signal entries on the app.

\r\n

Components

\r\n

Upon loading the app, the user will see a GUI dialog with four main tabs:

\r\n

Display Tab - the dashboard main window
Data Tab - used in working with data
Signals Tab - used in working with signals
Options Tab - saving/loading dashboard files, global settings

\r\n

Basic Usage Guidelines

\r\n

Think of a trading signal
Under the Data tab, create the data entries which represent the various data that the signal will use - a separate sub-dialog will be provided for each data declared

On the sub-dialog, determine the type and a custom name for the data (optional).
Other fields may appear as needed, depending on the type of data

Under the Signal tab, create the signal entry which will represent the trading signal - a separate sub-dialog will be provided for each signal declared

On the sub-dialog, under the General tab, apply a custom name (optional) and whether or not to show the signal on the display (default=true, optional)
On the sub-dialog, under the Long and Short tabs, specify the type of signal evaluation to use (other fields may appear as needed, depending on signal type)

To view the signals created/changed, switch to the Display tab of the main dialog.

\r\n

Features

\r\n

Data

Raw values
Bid & ask prices
Candle prices
Standard indicators
Custom indicators
Combination of data entries (complex type)

Signals

Comparison of two data entries
Indicator (arrow)
Combination of signal entries (complex type)

Alerts

Popup
Email
Push notification

Miscellaneous

Autosave
Saving and loading files
Locking data to a specific timeframe
Locking data to a specific symbol
Global timeframe
Global symbol
Show/Hide display entries
Automated updating of signals

\r\n

Types of Data

\r\n

Each data declared within the app can be any of the following types:

\r\n

Fixed value or constant value such as integers (-1, 0, 1, 2) and floating point numbers (1.5, 2.0, 3.1416)
Chart prices (Bid & Ask)
Candle prices (Open, High, Low, Close, Median, Typical, Weighted)
Standard indicators (all standard indicators available in the trading platform)
Custom indicators (IND_CUSTOM)
Complex data - combination of 1 or more data entries

\r\n

Types of Signals

\r\n

Each signal declared within the app can be any of the following types:

\r\n

Data? Data - comparison of two data entries through the use of comparison operators
Data (Arrow) - checking for a presence of an arrow or symbol output from an indicator on a particular section (bar) on the chart
Data (Signal) - combination of two or more signal entries

\r\n

Parameters

\r\n

application name - the name of the app instance / custom label for the app dialog window
autosave file - name of file to use to retain dashboard information when the chart is changed

\r\n

Note: although the app does not require its users to possess coding skills, it uses some concepts in logic and programming. To those who have little to no programming experience, it is highly recommended to read and understand the documentation: https://www.mql5.com/en/blogs/post/717539

", "url": "https://www.mql5.com/pt/market/product/28999", "small_icon": "https://c.mql5.com/31/239/universal-signal-dashboard-logo-60x60-1228.png", "middle_icon": "https://c.mql5.com/31/446/universal-signal-dashboard-logo-140x140-8169.png", "icon": "https://c.mql5.com/31/239/universal-signal-dashboard-logo-200x200-6753.png", "rating": 0, "price": 150, "published": 1525715003, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29004, "title": "Harmonic Volatility Indicator MT5", "description": "

Introduction to Harmonic Volatility Indicator

Harmonic Volatility Indicator is the first technical analysis applying the Fibonacci analysis to the financial volatility. Harmonic volatility indicator is another level of price action trading tool, which combines robust Fibonacci ratios (0.618, 0.382, etc.) with volatility. Originally, Harmonic Volatility Indicator was developed to overcome the limitation and the weakness of Gann’s Angle, also known as Gann’s Fan. We have demonstrated that Harmonic Volatility Indicator can be applied in a similar manner to Gann’s Angles (or Gann’s Fans) to your chart. At the same time, since the volatility is important information for traders, Harmonic Volatility Indicator can bring many other benefits for your trading. Harmonic Volatility Indicator can be incorporated to your existing technical analysis. It is also very effective in spotting mature trend or breakout phase. You can use this tool to identify the significant support resistance levels, trend reversal point and breakout trading.

Trading Strategy Guide

You can find the detaild trading strategy guide about how to use volatility indicator from the link below. We recommend to read this article before using this volatiltiy indicator for your trading.

https://www.mql5.com/en/blogs/post/750389

Settings

These inputs control the global setting of the indicator.

Number of Daily Session: 0 means indicator will not draw any daily volatility lines. 1 means that indicator will draw one set of daily volatility lines. You can create multiple session of daily volatility lines. However, too many sessions can slow down your MetaTrader. So use the right number for your computer.
Number of Weekly Session: It is the same as daily session input.
Number of Monthly Session: It is the same as daily session input.
Starting Index: 0 is default value. For 0, indicator will start to draw from session 0.
Use White Chart: True means that you will use white background chart.
Use Individual Line Color: If false, then you will use global color scheme. If true, then you can use individual color scheme
Daily Line Color: Color of daily line
Weekly Line Color: Color of weekly line
Monthly Line Color: Color of monthly line
Show Probability Lines: Switch on and off the curved probability line
Show Final Projection: Switch on and off the trading zone box
Final Projection Margin: Size of box

Market Profile settings

Use Market Profile: Switch on and off market profile from your chart
Session: Choose from daily, weekly or monthly only
SessionsToCount: Number of sessions, for which to count the Market Profile
Color for Market Profile: color for Market Profile
Color for Median: color for median value
Color for Value Area: color for value area

Input settings for each probability line

Each probability line can be switched on and off according to your preferences. You have the same setting for nine lines.

Use Line 1: You can switch on and off the line
Probability Line 1: You can set the ratio of the line
Probability Line 1 Color: Color for line
Probability Line 1 Width: Width for line
Probability Line 1 Style: Style for line

Keyboard Short Cut

Press Keyboard D: Redraw Harmonic Volatility indicator from your chart.

Timeframe Choice

When Daily Market Profile session is on, you cannot use H4, D1, W1 and MN timeframe.

Important Note

This is the off the shelf product. Therefore, we do not accept any modification or customization request on this product. In addition, we do not provide any code library or any support for your coding for this product.

", "url": "https://www.mql5.com/pt/market/product/29004", "small_icon": "https://c.mql5.com/31/262/harmonic-volatility-indicator-mt5-logo-60x60-6215.png", "middle_icon": "https://c.mql5.com/31/438/harmonic-volatility-indicator-mt5-logo-140x140-4092.png", "icon": "https://c.mql5.com/31/262/harmonic-volatility-indicator-mt5-logo-200x200-4812.png", "rating": 0, "price": 80, "published": 1524588583, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29168, "title": "Extremum catcher MT5", "description": "

The Extremum catcher MT5 indicator analyzes the price action after breaking the local Highs and Lows and generates price reversal signals with the ability to plot the Price Channel. If you need the version for MetaTrader 4, see Extremum catcher.

\r\n

The indicator takes the High and Low of the price over the specified period - 24 bars by default (can be changed). Then, if on the previous candle, the price broke the High or Low level and the new candle opened higher than the extremums, then a signal will be generated on the zero candle and an arrow for entering a deal (reversal) is drawn, while the extremum levels are marked with lines on the chart.

\r\n

It is possible to filter the Highs as confirmed (Extremum) or unconfirmed (Maximum), this option can be enabled in the settings.

\r\n

In order to receive push notifications to your mobile terminal, you should properly configure your MetaQuotes ID in terminal settings (see the article for details).

\r\n

Settings

\r\n

barPeriod - number of candles to search for local extremums.
Alert - enable sound notification about signal appearance.
Send notifications - allow sending push notifications to your mobile terminal.
Type search by - type of entry searching based on formed extremums - Extremum, or based on maximums - Maximum.
Show Local Extremum and Maximum - enable/disable display of the local levels.
Show all Extremum and Maximum - enable/disable display of all used levels.
Show Price Channel - display the Price Channel indicator on the chart.
Arrow indentation - offset for arrows. If the arrows on the chart gets in your way (they are placed at candle Open), this option allows to move them away from the candles.
Color Sell - color of the Sell arrow.
Color Buy - color of the Buy arrow.
Color Price Channel - color of the price channel (if it is enabled).

\r\n

Indicator buffers

\r\n

0 - Buy signals if there is no signal = 0;
1 - Sell signals if there is no signal = 0;
2 - Upper border of the Price Channel;
3 - Lower border of the Price Channel.

", "url": "https://www.mql5.com/pt/market/product/29168", "small_icon": "https://c.mql5.com/31/241/extremum-catcher-mt5-logo-60x60-6133.png", "middle_icon": "https://c.mql5.com/31/442/extremum-catcher-mt5-logo-140x140-1806.png", "icon": "https://c.mql5.com/31/241/extremum-catcher-mt5-logo-200x200-8199.png", "rating": 0, "price": 30, "published": 1524849030, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29187, "title": "PipFinite Impulse PRO MT5", "description": "Are You Tired Of Getting Hunted By Spikes And Whipsaws?
\r\n

\r\n

Don't become a victim of the market's erratic moves.. Do Something About It!

\r\n\r\n

Instantly make smarter decisions with Impulse Pro's precise balance of filters and accurate statistics.\r\n

\r\n

\r\n\r\n\r\n

Timing Is Everything In Trading
\r\n

\r\n

\r\n\r\n\r\n\r\n

To learn more, please visit ► www.mql5.com/en/blogs/post/718212

\r\n

Anticipate the next big move before it unfolds in 3 Simple Steps!\r\n\r\n\r\n\r\n\r\n\r\n

\r\n

Advantages You Get

\r\n

Early impulse detection algorithm.
Flexible combination to different trading strategies.
Advanced statistics calculation following the entry point, take profit and exit signal.
Never repaints, never backpaints, never recalculates.
Signals strictly on the close of a bar.
Works in all symbols and all timeframes.
Integrated pop-up, email, push notifications and sound alerts.
Fully compatible with Expert Advisor (EA) development.

\r\n

How To Trade

\r\n\r\n

Step 1: Trade Setup

\r\n

Enter a signal if Statistics Success Rate is higher than 65% (Statistics Success Rate > 65%).

\r\n

Step 2: Set Take Profit

\r\n

Option 1: Take profit on TP1.
Option 2: Partial take profit on TP1 and close remaining position on TP2.

\r\n

Step 3: Exit Strategy

\r\n

If buy signal did not reach take profit, exit buy signal on a new sell signal.
If sell signal did not reach take profit, exit sell signal on a new buy signal.

Advanced Statistics Calculation

\r\n

Win Condition

\r\n

TP1 Hit - when a signal reaches at least TP1.
EXIT Win - when a trade is closed on opposite signal and resulted in a positive profit.

\r\n

Loss Condition

\r\n

Exit Loss - when trade is closed on the opposite signal and resulted in a negative profit.

\r\n

Success Rate

\r\n

Percentage of signals qualified for win condition.
Used as reference to find better pairs and timeframes.

Parameters

Volatility Period - number of bars used to calculate the algorithm.
Volatility Factor - minimum volatility multiplier required to confirm impulse moves.
Take Profit Factor - multiplier used to calculate take profit levels.
Maximum History Bars - maximum number of bars used for calculations.
Misc Parameters - control the universal visibility of objects and buffers.
Display Parameters - control the visibility of objects drawn on a chart.
Graphics Parameters - control the appearance and colors of drawn objects on a chart.
Dashboard Parameters - control the visibility and colors of statistics found on a chart.
Alert Parameters - control the alert options enabled.

\r\n

User Manual

For more information ► Click Here", "url": "https://www.mql5.com/pt/market/product/29187", "small_icon": "https://c.mql5.com/31/338/pipfinite-impulse-pro-mt5-logo-60x60-9039.png", "middle_icon": "https://c.mql5.com/31/446/pipfinite-impulse-pro-mt5-logo-140x140-4253.png", "icon": "https://c.mql5.com/31/338/pipfinite-impulse-pro-mt5-logo-200x200-4709.png", "rating": 4.875, "price": 88, "published": 1526924044, "popularity": 0, "category": "Indicator", "votes": 16 }, { "id": 29198, "title": "Quick trade report separately by symbols 5", "description": "

The Quick trade report separately by symbols script will be useful for simultaneous trading on multiple instruments. It provides the ability to assess the effectiveness of trading on each symbol separately. It is possible to set a time period for making the reports.

The report visualizes the changes in the balance for deals on each symbol. Also, the following key trading parameters are calculated for each instrument:

Total net profit - the financial result of all trades. This parameter represents the difference between \"Gross profit\" and \"Gross loss\".
Profit factor - the ratio of gross profit and gross loss. One means that these parameters are equal.
Expected payoff - this is a statistically calculated value showing the average return of one deal.
Recovery Factor - the value reflects the riskiness of the strategy, i.e. the amount of money risked by the Expert Advisor to make the profit it obtained. It is calculated as the ratio of gained profit to the maximum drawdown.
Sharpe Ratio - this parameter shows strategy efficiency and reliability. It reflects the ratio of the arithmetical mean profit for the position holding time to the standard deviation from it.
Absolute drawdown - balance fall below the initial deposit value.
Maximal drawdown - the largest fall of balance relative to the local maximum in the deposit currency.
Relative drawdown - the largest fall of balance relative to the local maximum of balance in percents.
Total trades - the total amount of executed trades (the trades that resulted in a profit or loss).

Input parameters

report starting date - the date of the first deal included in the report. If the parameter value is not changed, the report includes all deals up to the last one.
report end date - the date of the last deal included in the report. If the parameter value is not changed, the report includes all deals starting from the first one.
hide account number - show/hide the account number in the report.

", "url": "https://www.mql5.com/pt/market/product/29198", "small_icon": "https://c.mql5.com/31/242/quick-trade-report-separately-by-symbols-5-logo-60x60-6989.png", "middle_icon": "https://c.mql5.com/31/446/quick-trade-report-separately-by-symbols-5-logo-140x140-2101.png", "icon": "https://c.mql5.com/31/242/quick-trade-report-separately-by-symbols-5-logo-200x200-6160.png", "rating": 0, "price": 30, "published": 1525363514, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29250, "title": "DeMarker Alerts MT5", "description": "

You can avoid constant monitoring of computer screen waiting for the DeMarker signal while receiving push notifications to a mobile terminal or a sound alert on the screen about all required events, by using this indicator - DeMarker Alerts. In fact, it is the replacement of the standard indicator with which you will never miss the oscillator signals.

\r\n

If you don't know the benefits of DeMarker or how to use it, please read here. If you need signals of a more popular RSI indicator, use RSI Alerts. If you need the version for MetaTrader 4, see DeMarker Alerts.

\r\n

Currently supported events

\r\n

Indicator crossing down the upper signal level (default is 0.7) - a sell signal.
Indicator crossing up the upper signal level (default is 0.7) - a buy signal, or better wait.
Indicator crossing down the lower signal level (default is 0.3) - a buy signal, or better wait.
Indicator crossing up the lower signal level (default is 0.3) - a buy signal.

\r\n

You can also edit the values of these levels using the Max signal level and Min signal level variables.

\r\n

Available Alerts

\r\n

Sound signal with a pop-up message box - Alert.
A push notification to a mobile terminal (smartphones and tablets) - Push.

\r\n

If you want to enable push notifications with DeMarker signals, you should indicate MetaQuotes ID (how to do it).

\r\n

Indicator Parameters

\r\n

Enable alerts - allow sound alerts and message display on the screen.
Crossed from the bottom up Max level (default 0.7) - enable alert for the indicator crossing Max signal level from bottom up
Crossed from top to bottom Max level (default 0.7) - enable alert for the indicator crossing Max signal level from top down
Crossed from the bottom up Min level (default 0.3) - enable alert for the indicator crossing Min signal level from bottom up
Crossed from top to bottom Min level (default 0.3) - enable alert for the indicator crossing Min signal level from top to bottom
Candle which look for the signal (0 = current candle) - the number of the candlestick, on which the signal is used (0 - current candle, 1 - previous).
Send Notification - allow sending Push notifications to your mobile terminal.
DeMarker Period - DeMarker indicator period
Max signal level - upper signal level
Min signal level - lower signal level
DeMarkercolor - indicator color
DeMarkerWidth - indicator line width
messageUp - message template for upward crossing
messageDown - message template for downward crossing

\r\n

It is also possible to change the text in the message. In variables messageUp and messageDown:

\r\n

%level% mean the level crossed by the indicator
%tf% mean the timeframe from which the signal is received.
%num% mean the number of the candlestick from which the signal is received.

\r\n

If this indicator is lacking functionality you want, be welcome to write me.

", "url": "https://www.mql5.com/pt/market/product/29250", "small_icon": "https://c.mql5.com/31/242/demarker-alerts-mt5-logo-60x60-8727.png", "middle_icon": "https://c.mql5.com/31/440/demarker-alerts-mt5-logo-140x140-7110.png", "icon": "https://c.mql5.com/31/243/demarker-alerts-mt5-logo-200x200-2478.png", "rating": 0, "price": 30, "published": 1525363666, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29263, "title": "MFI Alerts MT5", "description": "

If you use the MFI (Money Flow Index) indicator, the waiting time till the next signal can be long enough. Now you can avoid sitting in front of the monitor by using MFI Alerts. This is an addition or a replacement to the standard MFI oscillator. Once there appears an MFI signal on the required level, the indicator will notify you with a sound or push, so you will never miss a signal. This is especially significant if you follow the indicator in different timeframes and currency pairs, which can be a complicated task.

\r\n

If you don't know the benefits of MFI or how to use it, please read here. If you need signals of a more popular RSI indicator, use RSI Alerts. If you need the version for MetaTrader 4, see MFI Alerts.

\r\n

Currently supported events

\r\n

Crossing down the upper signal level (default is 80) - a sell signal.
Crossing up the upper signal level (default is 80) - a buy signal, or better wait.
Crossing down the lower signal level (default is 20) - a buy signal, or better wait.
Crossing up the lower signal level (default is 20) - a buy signal.

\r\n

You can also edit the values of these levels using the Max signal level and Min signal level variables.

\r\n

Available Alerts

\r\n

Sound signal with a pop-up message box - Alert.
A push notification to a mobile terminal (smartphones and tablets) - Push.

\r\n

If you want to enable push notifications, you should properly configure your MetaQuotes ID in terminal settings (how to do it).

\r\n

Indicator Parameters

\r\n

Enable alerts - allow sound alerts and message display on the screen.
Crossed from the bottom up Max level (default 80) - enable alert for the indicator crossing Max signal level from bottom up
Crossed from top to bottom Max level (default 80) - enable alert for the indicator crossing Max signal level from top down
Crossed from the bottom up Min level (default 20) - enable alert for the indicator crossing Min signal level from bottom up
Crossed from top to bottom Min level (default 20) - enable alert for the indicator crossing Min signal level from top to bottom
Candle which look for the signal (0 = current candle) - the number of the candlestick, on which the signal is used (0 - current candle, 1 - previous).
Send Notification - allow sending Push notifications to your mobile terminal.
Send Email Notification - allow sending Email notifications to email.
MFI Period - MFI indicator period
Max signal level - upper signal level
Min signal level - lower signal level
MFIcolor - indicator color
MFIWidth - indicator line width
messageUp - message template for upward crossing
messageDown - message template for downward crossing

\r\n

The text in the message can be edited. Tags are used in variables messageUp and messageDown:

\r\n

%level% mean the level crossed by the indicator
%tf% mean the timeframe from which the signal is received.
%num% mean the number of the candlestick from which the signal is received.

\r\n

If you need any additional functionality for the indicator, contact me.

", "url": "https://www.mql5.com/pt/market/product/29263", "small_icon": "https://c.mql5.com/31/242/mfi-alerts-mt5-logo-60x60-1220.png", "middle_icon": "https://c.mql5.com/31/440/mfi-alerts-mt5-logo-140x140-9139.png", "icon": "https://c.mql5.com/31/242/mfi-alerts-mt5-logo-200x200-7818.png", "rating": 5, "price": 30, "published": 1525359836, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 29465, "title": "Black Box EURUSD morning MT5", "description": "

This algorithm uses statistically justified comparison of numerical constant values and output values of Williams R, CCI and Stochastic indicators in order to take decision whether it is necessary to open position.

\r\n

Prior to give birth to a new EA, this logic was created as a result of usage of stochastic methods and then tested on historical data and checked with Monte Carlo method which does not guarantee any results in the future, of course.

\r\n

The bot is designed to trade during morning hours on EURUSD using 15 minute timeframe.

\r\n

Despite the fact that this condition is not obligatory, trading logic assumes that no positions should remain open during publications of significant economic news like Non-farm Payrolls.

\r\n

From machine learning point of view, the EA should be optimized every 52 days using 207 day interval.

\r\n

Default settings presume that servers of chosen broker work in widely spread EET time zone (10 AM - 3 PM by default). If it is necessary to set up trading in UTC time zone, the user should deduct 3 (in Winter time) or 2 from the default time settings.

\r\n

Default trading volume is set to 0.05 standard EURUSD lots (EUR 5000 on a typical non-cent account). In order to trade this volume comfortably, your deposit should not be less than EUR 200 given that you use effective leverage equal to 1:25.

\r\n

Parameters

\r\n

magic - \"magic\" number, identifier of the EA for marking your orders
start_hour - time, at which the EA commences trading
stop_hour - time, at which the EA ends trading, closes all orders and positions
friday_close - trigger that determines the individual end time of trading on Fridays
friday_close_hour - time, in which the EA ends trading on Fridays
lot - volume of open positions
stoch_k_1 - period %K of the first Stochastic indicator
stoch_d_1 - period %D of the first Stochastic indicator
stoch_slowing_1 - slowing parameter of the first Stochastic indicator
stoch_k_2 - period %K of the second Stochastic indicator
stoch_d_2 - period %D of the second Stochastic indicator
stoch_slowing_2 - slowing parameter of the second Stochastic indicator
stoch_k_3 - period %K of the third Stochastic indicator
stoch_d_3 - period %D of the third Stochastic indicator
stoch_slowing_3 - slowing parameter of the third Stochastic indicator
wpr_period - value that controls the Williams %R indicator
CCI_period - value that controls the CCI indicator
stoch_control_1 - value that controls Stochastic indicators
stoch_control_2 - value that controls Stochastic indicators

", "url": "https://www.mql5.com/pt/market/product/29465", "small_icon": "https://c.mql5.com/31/244/black-box-eurusd-morning-mt5-logo-60x60-2762.png", "middle_icon": "https://c.mql5.com/31/445/black-box-eurusd-morning-mt5-logo-140x140-5845.png", "icon": "https://c.mql5.com/31/244/black-box-eurusd-morning-mt5-logo-200x200-9084.png", "rating": 0, "price": 99, "published": 1526310097, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29494, "title": "MMM MFI and Moving Averages", "description": "

This Expert Advisor's main strategy is based on the usage of two kind of indicators: two built-in shifted MFI (Money Flow Index) to measure the asset prices oscillations and two Moving Averages calculated over Open Prices and Close Prices to confirm the trends. It combines these indicators signals in order to get stronger signals and ensure the EA will do good trading operations.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. This way you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (order open time).

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: closes any order after reaching profit define in currency value;
Take profit (order profit ceiling): traditional take profit (pips);
Stop loss (loss limit): traditional stop loss (pips);
Lots volume to trade: the lots volume to be traded;
Trailing stop loss: trailing stop loss distance. If input an invalid distance, the minimum distance allowed by market will be used. Disabled if = 0 (ZERO);
Maximum number of simultaneous orders: limits the number of pending orders. For Hedge account type;
Minimum equity percentage to allow opening new orders: defines the equity minimum percentage to open new orders;
Magic Number: identifies the orders opened and administrated by this EA;

\r\n

Bad time to trade inputs:

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's inputs:

\r\n

MFI:

\r\n

MFI period: defines the period used on MFI calculations;
MFI shift: defines the shift used on MFI calculations;
MFI Open Buy: defines the MFI lowest level where it gives BUY signal;
MFI Open Sell: defines the MFI up level where it gives SELL signal;
Applied Volume To MFI: the applied volume used on MFI calculations;

\r\n

Moving Averages:

\r\n

Open Price MA period: defines period used on Open Price MA calculation;
Low Price MA period: defines period used on Low Price MA calculation;

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15, spread 15 and Netting account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as you need.

", "url": "https://www.mql5.com/pt/market/product/29494", "small_icon": "https://c.mql5.com/31/245/mmm-mfi-and-moving-averages-logo-60x60-9619.png", "middle_icon": "https://c.mql5.com/31/441/mmm-mfi-and-moving-averages-logo-140x140-4852.png", "icon": "https://c.mql5.com/31/245/mmm-mfi-and-moving-averages-logo-200x200-1855.png", "rating": 0, "price": 120, "published": 1527095798, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29521, "title": "Black Box EURUSD evening MT5", "description": "

This algorithm uses statistically justified comparison of historical prices, moving average and output values of Williams R and Stochastic indicators in order to take decision whether it is necessary to open a position. Prior to giving birth to a new EA, this logic was created as a result of usage of stochastic methods and then tested on historical data and checked with Monte Carlo method, which, of course, does not guarantee any results in the future.

\r\n

The bot is designed to trade during evening hours on EURUSD M15. Despite the fact that this condition is not obligatory, trading logic assumes that no positions should remain open during publications of significant economic news like Non-farm Payrolls.

\r\n

From machine learning point of view, the EA should be optimized every month using 170 day interval.

\r\n

Default settings presume that servers of chosen broker work in widely spread EET time zone (4 PM - 10 PM by default). If it is necessary to set up trading in UTC time zone, the user should deduct 3 (in Winter time) or 2 from the default time settings.

\r\n

It is not recommended to change the trading range and the instrument itself due to the fact that the logic of the algorithm was created for specific behaviours of currency pairs during specific time periods. Default trading volume is set to 0.05 standard EURUSD lots (EUR 5000 on a typical non-cent account). In order to trade this volume comfortably, your deposit should not be less than EUR 200 given that you use effective leverage equal to 1:25.

\r\n

Options

\r\n

magic - \"magic\" number, identifier of the EA for marking its own positions
start_hour - time, at which the EA commences trading
stop_hour - time, at which the EA ends trading, stops sending orders and closes positions
friday_close - trigger that determines the individual end time of trading on Fridays
friday_close_hour - time, in which the EA ends trading on Fridays
lot - volume of opened positions
pips_breakeven - amount of pips earned in profitable position that triggers setting SL to entry price
wpr_period_1 - period of the first Williams %R indicator
wpr_period_2 - period of the second Williams %R indicator
sma_period - period of the SMA indicator
stoch_k - period %K of the Stochastic indicator
stoch_d - period %D of the Stochastic indicator
stoch_slowing - slowing parameter of the Stochastic indicator
stoch_control_1 - value that controls the Stochastic indicator
stoch_control_2 - value that controls the Stochastic indicator
bar - bar number used in trade logic

", "url": "https://www.mql5.com/pt/market/product/29521", "small_icon": "https://c.mql5.com/31/245/black-box-eurusd-evening-mt5-logo-60x60-6337.png", "middle_icon": "https://c.mql5.com/31/440/black-box-eurusd-evening-mt5-logo-140x140-1608.png", "icon": "https://c.mql5.com/31/245/black-box-eurusd-evening-mt5-logo-200x200-4070.png", "rating": 0, "price": 99, "published": 1526663716, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29573, "title": "SwingExpert for MT5", "description": "

The strategy is Based on the calculations of weighted volatility and related items. It uses a trading algorithm based on the price movement for avoidance trend conditions. Volatile market occurs 80% of the time. In this case, it is of great possibility to use the low volatility of EURCHF. When the trend of market, EA will stop work automatically, into the \"smart avoidance state\". When the market returns volatile, Transaction automatically return to normal! This EA does not use martingale or grid, \"data market\" is also tradable. In this case, the risk is extremely low.

Parameters (default recommended)

ShowLabel=true; status display
Lots = 0.1; fixed positions
SL = 600; fixed stop loss
ActiveTP=200; take profits activated
Magic = 599; order identification

Trading Conditions

Low spread ECN broker recommended.High spreads can lead to lost.
5 digit quotes, VPS server is good. Online all day. Without human intervention.
Conservatively, $3000/account, 0.1 lot... $30000/ account, 1 lot... and so on.
Radical trading: $1000-2000/account,0.1 lot...,relative risk,More profits.

Note

this EA is used for EURCHF, 30 minutes time frame.
The parameters of this EA does not provide much change options (the balance of risk and profit has been pre-optimized)
Before you buy this EA, it is highly recommended that you read the mql5 official website article \"How to Test a Trading Robot Before Buying\" https://www.mql5.com/en/articles/586

", "url": "https://www.mql5.com/pt/market/product/29573", "small_icon": "https://c.mql5.com/31/246/swingexpert-for-mt5-logo-60x60-9624.png", "middle_icon": "https://c.mql5.com/31/442/swingexpert-for-mt5-logo-140x140-5415.png", "icon": "https://c.mql5.com/31/246/swingexpert-for-mt5-logo-200x200-4864.png", "rating": 0, "price": 299, "published": 1527268674, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29579, "title": "EA Mbot News Trader MT5", "description": "

EA Mbot News Trader MT5 is an Expert Advisor based on a classical news trading strategy. You just need to configure from properties News time and the rest is automatically handled by the robot.

\r\n

The Expert Advisor uses pending orders expecting both breakout and rollback. Before news release, the EA places two pending orders at a preset distance from the current price. Once one of the orders triggers, the second one is deleted. A common trailing stop is used to manage positions. If a news release is not followed by price movement, the two orders are deleted after the specified time.

\r\n

Recommendations on trading

\r\n

0.01 lot with a minimum deposit of $100
It is recommended to test the EA on a demo account to understand what kind of settings you should use with your broker.
It can be optimized to work on any instrument
ECN brokers with low spread and slippage are recommended for trading

\r\n

Settings

\r\n

MagicNumberEA - unique number for the robot to distinguish its orders

\r\n

slippage - maximum slippage in points

\r\n

lotMode - lot settings

\r\n

LOT_MODE_CONST - fixed lot mode
LOT_MODE_STEP_BALANCE - automated lot calculation based on the lot and balance step
LOT_MODE_DEPO_RISK_PER_ORDER - automated lot calculation based on risk % of balance

lotConst - trade volume in the fixed sizing mode
lotModeStep_BalanceStep - balance step
lotModeStep_LotStep - lot step. For example, if you set the balance step to 100 and the lot step to 0.01, then 0.01 lot will be opened per each 100 of balance.
lotModeDepo_riskPerOrderPercent - risk percent of balance. (1-100%)

\r\n

timeSettings - time settings

\r\n

timeOfNewsLocal - news release data and time (local time)
secondsToStart - the time in seconds before the news release to place pending orders and to hold them at the given distance from the current price
secondsToCancel - time in seconds after which pending orders will be deleted
inpDistanceToBuy - distance between the Buy order and the current price
inpDistanceToSell - distance between the Sell order and the current
inpPendingOPModifyStep - orders price change step before a news release

\r\n

strategy - choose a trading strategy

\r\n

STRATEGY_STOPS - a breakout strategy. The EA places 2 orders: Sell Stop below the current price and Buy Stop above the current price
STRATEGY_LIMITS - a rollback strategy. The EA places 2 orders: Sell Limit below the current price and Buy Limit above the current price
STRATEGY_BUYSTOP - a Buy Stop order is placed
STRATEGY_SELLSTOP - a Sell Stop order is placed
STRATEGY_BUYLIMIT - a Buy Limit order is placed
STRATEGY_SELLLIMIT - a Sell Limit order is placed
deleteRemainingOrder - enable/disable deletion of the second order after a trade is opened
deleteUfterTimeCancel - enable/disable deletion of pending orders after timeout
StopLossBuy - configuration of the protective order in points for Buy trades
TakeProfitBuy - Take Profit for Buy trades in points
StopLossSell - configuration of the protective order in points for Sell trades
TakeProfitSell - Take Profit for Sell trades in points
SizeTrallStart - distance in points, after which Trailing Stop is activated
SizeTrall - Trailing Stop distance from the current price
SizeTrallStep - trailing step
NPipsTurnOnNoLoss - distance in points, after which the protective stop loss order is moved to the open price
NPipsShiftNoLossProfit - shift of the breakeven level from the opening level

\r\n

OtherVariables

\r\n

ordersCommentConst - a comment to orders
sleepIfFailedMs - a pause in seconds after an unsuccessful request
displayComment - enable/disable the information panel
displayPrint - enable/disable logs
messageType - notification about opening/closure of trades (alert, E-mail, Push)

", "url": "https://www.mql5.com/pt/market/product/29579", "small_icon": "https://c.mql5.com/31/246/ea-mbot-news-trader-mt5-logo-60x60-8826.png", "middle_icon": "https://c.mql5.com/31/447/ea-mbot-news-trader-mt5-logo-140x140-9187.png", "icon": "https://c.mql5.com/31/246/ea-mbot-news-trader-mt5-logo-200x200-8470.png", "rating": 0, "price": 60, "published": 1527869376, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29584, "title": "Double divergence scanner MT5", "description": "

Este indicador / oscilador múltiplo (doravante indicador), quadro de tempo múltiplo e indicador de símbolo múltiplo identifica quando ocorre uma divergência entre o preço e um, dois ou três indicadores. Ele identifica divergências regulares / clássicas (reversão da tendência) e ocultas (continuação da tendência). Possui opções de filtro de tendência RSI e MA, o que torna possível filtrar apenas as configurações mais fortes. Combinado com suas próprias regras e técnicas, este indicador permitirá que você crie (ou aprimore) seu próprio sistema poderoso.

Pode ser usado de 3 maneiras:

Defina o indicador principal e o segundo / terceiro e deixe o valor padrão 'atual' como Segundo período de tempo. Ao fazer isso, você receberá alertas apenas quando houver uma divergência dupla em cada período de tempo que você selecionou.
Defina o indicador principal e o segundo / terceiro e defina o período de tempo para a segunda / terceira divergência como, por exemplo, H4, ou defina 'Um período mais alto' como Verdadeiro. Ao fazer isso, você só receberá alertas quando houver uma segunda / terceira divergência também no intervalo de tempo H4 ou em um intervalo de tempo superior à divergência principal.
Defina apenas o indicador principal. Ao fazer isso, você receberá alertas quando houver uma divergência no indicador selecionado.

Recursos

Pode detectar divergências para os seguintes indicadores: MACD, Stochastics, OsMA, RSI, CCI, Awesome (AO), ADX, ATR, OBV, MFI, Momentum e Índice Composto.
Pode monitorar todos os símbolos visíveis na janela Market Watch ao mesmo tempo. Aplique o indicador a apenas um gráfico e monitore instantaneamente todo o mercado.
Pode monitorar cada período de tempo, de M1 a MN, e envia um alerta em tempo real quando uma divergência é identificada. Todos os tipos de alerta são suportados.
O indicador inclui um painel interativo. Por favor, veja a captura de tela separada para explicação.
O indicador pode gravar os sinais em um arquivo que pode ser usado por um Expert Advisor para negociação automática. Por exemplo, este produto .

Parâmetros de entrada

Encontre a descrição e explicação dos parâmetros de entrada aqui .

Observe que, devido à funcionalidade de quadro de tempo múltiplo, este indicador não desenhará linhas e setas ou venderá e comprará conselhos no gráfico onde o indicador foi instalado. Para isso, você precisa criar um modelo de gráfico com meu indicador de divergência livre.

É altamente recomendável colocar o indicador em um gráfico limpo (vazio) sem nenhum outro indicador ou Expert Advisors que possa interferir no scanner.

", "url": "https://www.mql5.com/pt/market/product/29584", "small_icon": "https://c.mql5.com/31/247/double-divergence-scanner-mt5-logo-60x60-8631.png", "middle_icon": "https://c.mql5.com/31/446/double-divergence-scanner-mt5-logo-140x140-8499.png", "icon": "https://c.mql5.com/31/247/double-divergence-scanner-mt5-logo-200x200-4320.png", "rating": 4.714285850524902, "price": 39, "published": 1527522837, "popularity": 0, "category": "Indicator", "votes": 7 }, { "id": 29586, "title": "Black Box XAUUSD evening MT5", "description": "

This algorithm uses statistically justified comparison of market data, numerical constant values and output values of Stochastic indicators and Moving Averages in order to take decision whether it is necessary to open a position.

\r\n

Prior to giving birth to a new EA, this logic was created as a result of usage of Stochastic methods and then tested on historical data and checked with Monte Carlo method, which does not guarantee any results in the future, of course.

\r\n

No martingale is used.

\r\n

The robot is designed to trade during evening hours on XAUUSD M15.

\r\n

Despite the fact that this condition is not obligatory, trading logic assumes that no positions should remain open during publications of significant economic news like Non-farm Payrolls.

\r\n\r\n

From machine learning point of view, the EA should be optimized every 23 days using 88 day interval.

\r\n

The default settings presume that servers of a chosen broker work in widely spread EET time zone (4 PM - 10 PM by default). If it is necessary to set up trading in UTC time zone, a user should deduct 3 (in winter time) or 2 from the default time settings.

\r\n

The default trading volume is set to 0.05 standard XAUUSD lots (5 ounces of Gold on a typical non-cent account). In order to trade this volume comfortably, your deposit should not be less than $260 given that you use effective leverage equal to 1:25.

\r\n

Parameters

\r\n

magic - \"magic\" number, identifier of the EA for marking its own positions
start_hour - time, at which the EA commences trading
stop_hour - time, at which the EA ends trading, stops sending orders and closes positions
friday_close - trigger that determines the individual end time of trading on Fridays
friday_close_hour - time, at which the EA ends trading on Fridays
lot - volume of opened positions
bar - bar number, used in trade logic
sma_period_1 - period of the first SMA indicator
sma_period_2 - period of the second SMA indicator
stoch_k_1 - %K period of the first Stochastic indicator
stoch_d_1 - %D period of the first Stochastic indicator
stoch_slowing_1 - slowing parameter of the first Stochastic indicator
stoch_k_2 - %K period of the second Stochastic indicator
stoch_d_2 - %D period of the second Stochastic indicator
stoch_slowing_2 - slowing parameter of the second Stochastic indicator
stoch_control_1 - value that controls the Stochastic indicators
stoch_control_2 - value that controls the Stochastic indicators
stoch_control_3 - value that controls the Stochastic indicators

", "url": "https://www.mql5.com/pt/market/product/29586", "small_icon": "https://c.mql5.com/31/246/black-box-xauusd-evening-mt5-logo-60x60-8185.png", "middle_icon": "https://c.mql5.com/31/445/black-box-xauusd-evening-mt5-logo-140x140-7564.png", "icon": "https://c.mql5.com/31/246/black-box-xauusd-evening-mt5-logo-200x200-7338.png", "rating": 0, "price": 99, "published": 1527095666, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29591, "title": "Smart Scroll", "description": "

This utility changes the behavior of auto-scroll.

\r\n

It removes the need to manually disable and re-enable the auto-scroll function.

\r\n

Main features

\r\n

Disables auto-scroll - when the screen is scrolled backwards to look at the price history.
Enables auto-scroll - when moved back to current history.

\r\n

Inputs

\r\n

None.

\r\n

Note

\r\n

I recommend testing when markets are open, since auto-scroll works when there are incoming ticks.

", "url": "https://www.mql5.com/pt/market/product/29591", "small_icon": "https://c.mql5.com/31/246/smart-scroll-logo-60x60-7721.png", "middle_icon": "https://c.mql5.com/31/439/smart-scroll-logo-140x140-5433.png", "icon": "https://c.mql5.com/31/246/smart-scroll-logo-200x200-8414.png", "rating": 0, "price": 30, "published": 1527008903, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29611, "title": "Velox", "description": "

Velox indicator

\r\n

\r\n\r\n\r\n

Velox is a\r\nindicator that shows the tendency, force and direction of price based on the\r\nfractal 5-3.

\r\n

\r\n\r\n

\r\n

Negotiation\r\nstrategy

\r\n\r\n\r\n

Composed of\r\n6 lines that oscillate above and below axis 0. Each line represents a fractal\r\nthat is calibrated by Phi³.

\r\n\r\n\r\n

To identify\r\na bullish trend, all rows must be above zero. Already a downtrend, all rows\r\nshould be below zero.

\r\n

\r\n\r\n\r\n

Indicator\r\nParameters:

\r\n\r\n\r\n

Period -\r\nNumber of bars for indicator calculations. The user can select the shortest,\r\nmedium and longest period.

\r\n

\r\n\r\n\r\n

\r\n

Examples:

\r\n\r\n

See examples\r\non the images and videos.

\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

\r\n\r\n\r\n\r\n\r\n

", "url": "https://www.mql5.com/pt/market/product/29611", "small_icon": "https://c.mql5.com/31/250/velox-logo-60x60-2317.png", "middle_icon": "https://c.mql5.com/31/439/velox-logo-140x140-7597.png", "icon": "https://c.mql5.com/31/250/velox-logo-200x200-7906.png", "rating": 0, "price": 40, "published": 1534857578, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29693, "title": "Trader Control Panel", "description": "

TCP - Trader Control Panel is an extension to build into MetaTrader 5 manual methods to control open positions. It adds opening and closing position feature as well as user-friendly monitoring dashboard, money and risk management when opening. Opening and closing positions are done by mouse by interactively placing stop loss line on appropriate level or by pressing predefined keys on keyboard. Before opening a new position, the EA calculates such lot size, which will guarantee you no more losses on stop loss line, than you previously set in EA's parameters. You may set this risk controlling values in % of your deposit or as a fixed money amount in deposit currency.

\r\n

General TCP usage scenario

\r\n

Fill in Market Watch with symbols you want to see in Dashboard.
Set max allowed risk for any opening position in account currency (Risk value<0) or in % of currently available balance (Risk value>0).
Switch to symbol you want trade by clicking it in Dashboard.
Show Minicharts for other periods to analyze price moving trend.
Define where you want to place StopLoss if you open a position now.
Open position by clicking price column in Dashboard and then - set StopLoss line. Or use Insert and Up/Down arrow keys for this.
When position will reach your goal – close it by clicking “x” button or pressing Del key.

\r\n

Parameters

\r\n

All EA parameters are grouped into three sections according to their functions:

\r\n

TRADING SETTINGS

\r\n

Open StopLoss - max available risk during opening new position. If Open StopLoss > 0 – its value treated as % from balance. If Open StopLoss < 0 – money in deposit currency.
Price deviation during open - price deviation during open.
StopLoss step moving by keyboard - StopLoss step size in points for moving position stop loss line by keyboard (arrows Up and Down).
Autoset TakeProfit multiplier of StopLoss Size - distance multiplier for auto setting take profit for opening a position. Set it to 0 if you want to open a position without initial take profit (you may set it later).
Use keys - enable/disable the keyboard (INS – open, DEL – close, 1-9 – partial close).

\r\n

PANEL SETTINGS

\r\n

Symbols in panel - symbols quantity (from top of the Market Watch) to be shown in TCP panel.
Background - TCP dashboard background color.
Text - TCP dashboard text color.
Borders - TCP dashboard borders color.
Zoom factor - scale to magnify dashboard in Tablet mode.
Use mini charts - Use or not minicharts. When false, the zoom button is also hiding, but you can toggle the table mode from keyboard by pressing Z key.

\r\n

OPEN POSITIONS COLORS

\r\n

Background - TCP dashboard background color.
Loss text - TCP dashboard text color for position with profit < 0.
Profit text - TCP dashboard text color for position with profit > 0.
Protected profit bar - TCP dashboard text color for position with protected profit > 0.

\r\n

Warning: Trader Control Panel does not work in the tester because it completely ignores all mouse and keyboard events which are core of this expert engine.

\r\n

So, there are three ways to decide if is it good for you or not:

\r\n

Trust my descriptions and promising.
Try TCP demo version, which does all stuff, except real executing commands to open and close order.
Rent the EA for one month (I set minimal price for this case) and test it in your real conditions.

", "url": "https://www.mql5.com/pt/market/product/29693", "small_icon": "https://c.mql5.com/31/249/trader-control-panel-logo-60x60-3329.png", "middle_icon": "https://c.mql5.com/31/446/trader-control-panel-logo-140x140-6360.png", "icon": "https://c.mql5.com/31/249/trader-control-panel-logo-200x200-4548.png", "rating": 0, "price": 130, "published": 1528385869, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29704, "title": "Gauge Classic Series", "description": "

This is a series of gauges that can be loaded on any Chart time frame. You can use this gauge indicators to decide when to enter and exit market with high degree of confident.

\r\n

Gauge No 1: Ichimoku Kinko Hyo Tenken Sen Crosses Kijun Sen. This will tell Bull and Bear and the timing to enter market. When the value move from above 0 towards below 0, the Tenken Sen line is moving to cross the Kijun Sen line and appears value is the Delta for the difference. Same goes to the opposite. The positive value is Bullish move while the negative value is Bearish move.

\r\n

Gauge No 2: MACD cross 0. This will tell STRONG Bull and Bear. When the value move from above 0 towards below 0, it indicates the market is changing the trend from Bull to Bear. When the value move from below 0 towards above 0, it indicates the market is changing the trend from Bear to Bull. It's simple.

\r\n

Gauge No 3: Force Index % level indicator with Force Index current Value against recent Low and high limit. The Limit is automatically adjusted and affected the Scale High and Low. This should be treated as Price movement towards Bullish (Positive value) or Bearish (Negative value).

\r\n

Gauge No 4: Your P&L Indicator.

\r\n

The Parameters as follows

\r\n

Indicator size: Set the size of the Indicator.
Indicator is in the background: True/False. Set the gauge indicator to appears on the background or not.
Scale transparency level, 0..255: Set the transparency of the gauge.
Needle transparency level, 0..255: Set the transparency of the needle on the gauge.

", "url": "https://www.mql5.com/pt/market/product/29704", "small_icon": "https://c.mql5.com/31/248/gauge-classic-series-logo-60x60-1603.png", "middle_icon": "https://c.mql5.com/31/441/gauge-classic-series-logo-140x140-7296.png", "icon": "https://c.mql5.com/31/248/gauge-classic-series-logo-200x200-9575.png", "rating": 0, "price": 39, "published": 1532020937, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 29706, "title": "Corridor BARs MT5", "description": "

The indicator shows the upper, middle and lower price limits for a certain period of time.

\r\n

Also, two Moving Averages (MAs) are displayed.

\r\n

Parameters
\r\n

\r\n

CTType: corridor basis. _Hour: hours, _Day: days, _Bars: bars
CTPrice: price type, by bars. OpenClose: Open/Close prices, HighLow: High/Low prices
CTShift: corridor shift
CTNum: how much to consider for building a corridor, min 2
CTPeriodFast: Fast period, min 2
CTShiftFast: Fast MA shift
CTMethodFast: Fast averaging method
CTPeriodSlow: Slow period, min 2
CTShiftSlow: Slow MA shift
CTMethodSlow: Slow averaging method

\r\n

Clipboard

\r\n

0: Corridor top
1: Corridor bottom
2: Corridor average
3: Fast MA
4: Slow MA

\r\n

Fully autonomous. No need for extra indicators.

\r\n

Sample indicator call:

\r\n

input int            CTType       = 2, // 0 hours, 1 days, 2 bars\r\n                     CTPrice      = 0, // 0 Open/Close, 1 High/Low\r\n                     CTNum        = 50,\r\n                     CTPeriodFast = 9,\r\n                     CTShiftFast  = 0;\r\ninput ENUM_MA_METHOD CTMethodFast = MODE_SMA;\r\ninput int            CTPeriodSlow = 15,\r\n                     CTShiftSlow  = 0;\r\ninput ENUM_MA_METHOD CTMethodSlow = MODE_SMA;\r\n\r\nint    handle;\r\nstruct SBuffers\r\n{\r\n     double array[];\r\n} Buffers[5];\r\n\r\nvoid OnInit()\r\n{\r\n     handle = iCustom(_Symbol, 0, \"CorridorTrade\", CTType, CTPrice, 0, CTNum, CTPeriodFast, 0, CTMethodFast, CTPeriodSlow, 0, CTMethodSlow);\r\n     if(handle==INVALID_HANDLE) ExpertRemove();\r\n     \r\n     for(int i=0; i<5; i++)\r\n          ArraySetAsSeries(Buffers[i].array, true);\r\n}\r\nvoid OnTick()\r\n{\r\n     for(int i=0; i<5; i++)\r\n     {\r\n          ArrayFree(Buffers[i].array);\r\n          if( CopyBuffer(handle, i, 0, 1, Buffers[i].array) != 1 )\r\n               return;\r\n     }\r\n     \r\n     Comment(  \"Top: \",    DoubleToString(Buffers[0].array[0], _Digits),\r\n               \"\\n\",\r\n               \"Bottom: \", DoubleToString(Buffers[1].array[0], _Digits),\r\n               \"\\n\",\r\n               \"Medium: \", DoubleToString(Buffers[2].array[0], _Digits),\r\n               \"\\n\",\r\n               \"Fast: \",   DoubleToString(Buffers[3].array[0], _Digits),\r\n               \"\\n\",\r\n               \"Slow: \",   DoubleToString(Buffers[4].array[0], _Digits)\r\n            );\r\n}

", "url": "https://www.mql5.com/pt/market/product/29706", "small_icon": "https://c.mql5.com/31/247/corridor-bars-mt5-logo-60x60-7302.png", "middle_icon": "https://c.mql5.com/31/440/corridor-bars-mt5-logo-140x140-9392.png", "icon": "https://c.mql5.com/31/247/corridor-bars-mt5-logo-200x200-2303.png", "rating": 0, "price": 30, "published": 1527869421, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29722, "title": "MMM Ichimoku Kinko Hyo", "description": "

MMM Ichimoku EA strategy

\r\n

The robot uses its built in Ichimoku indicator all the time and does a calculation to determine the prices trends. If it indicates the price will be bullish, it sends a buy order. If the indicator indicates the price will be bearish, it sends a sell order;
It will not send an order unless the calculations determines a good trend;

\r\n

It protects your money because it is provided with

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. This way you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (order open time).

\r\n

General Inputs

\r\n

Closes orders with any profit of value (currency): closes any order after reaching profit define in currency value;
Take profit (order profit ceiling): traditional take profit (pips);
Stop loss (loss limit): traditional stop loss (pips);
Lots volume to trade: the lots volume to be traded;
Trailing stop loss: trailing stop loss distance. If input an invalid distance, the minimum distance allowed by market will be used. Disabled if = 0 (ZERO);
Maximum number of simultaneous orders: limits the number of pending orders. For Hedge account type;
Minimum equity percentage to allow opening new orders: defines the equity minimum percentage to open new orders;
Equity Percentage to Stop Out: defines the equity percentage low level to stop out. Closes All orders if reaches this level. Disabled if = 0;
Magic Number: identifies the orders opened and administrated by this EA;

\r\n

Bad time to trade inputs

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's inputs

\r\n

Tenkan Sen: indicator's parameter. It's default value is 9. Do not change it if you will not test before using;
Kijun Sen: indicator's parameter. It's default value is 26. Do not change it if you will not test before using;
Senkou Span B: indicator's parameter. It's default value is 52. Do not change it if you will not test before using;
Shift: shift used by the Ichimoku indicator.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15, spread 15 and Hedging account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/29722", "small_icon": "https://c.mql5.com/31/247/mmm-ichimoku-kinko-hyo-logo-60x60-7506.png", "middle_icon": "https://c.mql5.com/31/447/mmm-ichimoku-kinko-hyo-logo-140x140-9147.png", "icon": "https://c.mql5.com/31/247/mmm-ichimoku-kinko-hyo-logo-200x200-4154.png", "rating": 0, "price": 130, "published": 1528737667, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29785, "title": "Extreme Breakout EA", "description": "

The Extreme Breakout EA is a fully automated multi currency Expert Advisor that trades time based breakouts and has various options to improve performance. The Extreme Breakout EA trades using pending orders and has the option to enter using market orders if required.

View More Products - https://www.mql5.com/en/users/robots4forex/seller#!category=1
Monitoring Signals - https://www.mql5.com/en/signals/author/robots4forex?orderby=gain

Designed for USDJPY.

Features

Fully automated
Not sensitive to spread, high pip/low lot trades
No trades held overnight
Risk Money Management
Works on any account size
Always a stop loss in place
Only one trade open at any time per pair
Hedge and Net account compatible
This system is NFA/FIFO compliant
No Grids
No Martingale
$100 minimum account balance per pair
1:30 minimum leverage, 1:100+ recommended
One chart per pair

Input Settings

MagicOrderNumber - Unique identity integer for the EA.
Lots - Lot size if MM is off. Values 0.01 to 200.0.
Slippage - Slippage in points. Values 1 to 10.
MoneyManagement - Turn on for MM auto lot size, true/false.
MoneyManagementRisk - Risk per trade if MM is on. Values 0.01(1%) to 0.1.
AllowNewTrades - Turn on to allow trading, true/false.
AccountProfitLock - Limit maximum draw down if MM is enabled (0.5 = 50% of account balance). Values 0.0 to 1.0.

TimeFrame - Timeframe selection that EA will use to trade.
MaxSpread - Max spread in pips that the EA will trade. Values 1.0 to 10.0.
TakeProfit - The take profit (0 disables) - Values 0 to 4000.
TakeProfitD1ATR - Take profit based on ATR (0 disables) - Values from 0.25 to 1.5.
GMTOffsetHours - GMT offset in hours for your broker's time zone - Values -12 to 12.
StartHour - Start bar hour - Values 0 to 24.
StartMin - Start bar minutes - Values 0 to 59.
EndHour - End bar hour - Values 0 to 24.
EndMin - End bar minutes - Values 0 to 59.
PreviousBarsForBOBox - Previous bars to use for the breakout box from start bar - Values 1 to 10.
BOBoxGap - Increase of breakout box size in pips - Values 0 to 10.
TrailingBars - Number of bars for trailing stop (0 disables trailing stops) - Values 0 to 10.
MinTrailingStopLoss - Minimum trailing stop loss size in pips - Values 0 to 50.
DeleteInactiveStopOrder - If enabled only trades breakout in one direction, true/false.
InvisibleStops - Enable to close positions using market orders, true/false.
EmergencyStopOffset - The offset in pips from the inivisible stop loss for the trade stop loss. Values 10 to 50.
BreakEven - When enabled, performs a break even, true/false .
BreakEvenStartPips - Pips in profit to perform the break even. Values 1 to 100.
BreakEvenPips - Stop loss pips when performing break even. Values 1 to 10.
BreakEvenBars - Number of bars of clearance of BreakEvenStartPips before performing breakeven, zero disables bar count feature. Values 0 to 10.
AdvancedExit - When enabled, uses ATR to adjust the take profit, true/false .
AdvancedExitThreshold - Maximum number of pips of profit that the advanced exit is active. Values 1 to 100.
AdvancedExitTiming - Minutes from the end bar, should be set to a bar time to work, e.g. for M30 timeframe 30,60,90 would work. Values 0 to 1000.
AdvancedExitATRPeriod - ATR period for the advance exit calculation. Values 1 to 100.
AdvancedExitATRMultiplier - ATR multiplier for the advance exit calculation. Values 1 to 10.
TradeOnSunday - Enabled trading on Sunday, true/false.
TradeOnMonday - Enabled trading on Monday, true/false.
TradeOnTuesday - Enabled trading on Tuesday, true/false.
TradeOnWednesday - Enabled trading on Wednesday, true/false.
TradeOnThursday - Enabled trading on Thursday, true/false.
TradeOnFriday - Enabled trading on Friday, true/false.

", "url": "https://www.mql5.com/pt/market/product/29785", "small_icon": "https://c.mql5.com/31/248/extreme-breakout-ea-logo-60x60-9909.png", "middle_icon": "https://c.mql5.com/31/446/extreme-breakout-ea-logo-140x140-4065.png", "icon": "https://c.mql5.com/31/248/extreme-breakout-ea-logo-200x200-8729.png", "rating": 0, "price": 199, "published": 1528275506, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29801, "title": "Creating orders with a fixed stop in dollars", "description": "

The utility helps open a deal with a stop loss that does not exceed the specified amount, or to refrain from it altogether. That is, it determines the number of lots to open the deal so that the stop loss is as close as possible to the specified amount in USD without exceeding it.

\r\n

For example, it will be indispensable when trading according to the Gerchik strategy. That is, when trading based on risks, with a fixed risk and a fixed take profit relative to stop loss. For example, if you always open deals with a risk of 10 USD and a take profit of 30 USD (3 to 1), this utility will help you to easily determine the number of lots for opening the deal to meet the conditions.

\r\n

It also allows you to:

\r\n

set auto application of the least possible stop loss for this symbol;
set take profit relative to stop loss (3 to 1, 4 to 1, etc.);
open a deal both by market and by placing a limit order;
check and avoid a deal, if take profit exceeds the boundaries of the instrument's price channel;
draw a line defined as the ratio of take profit to stop loss for partially closing the deal.

\r\n

The stop loss level can be specified both in USD and in percentage of the balance.

\r\n

You do not have to enter the market. Instead, you can simply track a number of lots necessary to open a trade and a take profit level. That data is displayed in the utility settings window after you set a stop loss price.

\r\n

Launch the utility on the chart where a deal is to be opened. It is necessary to specify one parameter - the stop loss level (Stop loss Price). It represents the price where the stop loss is to be set. This price can be set both manually by entering a value in the corresponding field, and by moving the red line created by the utility on the chart.

\r\n

Based on the stop loss level and other parameters, the utility determines the direction for opening a deal, the lot size, the order type for performing it (market or limit) and the take profit level.

\r\n

Utility parameters

\r\n

Loss in dollars or per cent for a stop line (STOP_IN) – amount in USD or in percentage of the balance that would be lost in case a stop loss is triggered (in USD by default).
Choice of dimension for STOP_IN – select if the amount at risk for opening a trade is specified in USD or in percents of the balance.
Do not open a trade if at min lot stop is greater than STOP_IN – if true, then a trade will not be opened in case the loss received at a stop loss exceeds the allowable risk (default is true).
Opening price (0 - by market) – price for opening a trade (if > 0, then a limit order is sent, otherwise - order by market); this price can be set both manually by entering a value in the corresponding field, and by moving the green line created on the chart.
Multiplier for take – multiplier for determining the ratio of take profit to stop loss (default is 4, that is, reaching the take profit earns 4 times the possible loss when reaching the stop loss).
Draw a line at the level of a given number of stops – if greater than 0, a line will be drawn on the chart at the level of the specified multiplier relative to stop loss (default is 3, that is, the line will be drawn at the level of three stop losses from the opening price to the profit area). This line can be used for determining the price to partially close a trade, if you prefer closing trades gradually.
The price of the top level (0 - do not check) – the maximum price for take profit (if take profit exceeds this price,, the order will not be created). That is, if an instrument is traded within a channel, and you are 99% certain that the price will not go above the channel, you can set a borderline price for the channel to ensure that the take profit does not exceed the channel with the selected multiplier.

\r\n

Demo version of the utility: https://www.mql5.com/en/market/product/30061/

", "url": "https://www.mql5.com/pt/market/product/29801", "small_icon": "https://c.mql5.com/31/248/creating-orders-with-a-fixed-stop-in-dollars-logo-60x60-2250.png", "middle_icon": "https://c.mql5.com/31/446/creating-orders-with-a-fixed-stop-in-dollars-logo-140x140-9654.png", "icon": "https://c.mql5.com/31/248/creating-orders-with-a-fixed-stop-in-dollars-logo-200x200-3400.png", "rating": 1, "price": 30, "published": 1530204749, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 29809, "title": "MMM Adx PSar and MA", "description": "

MMM ADX, P. SAR & MA strategy:

\r\n

As requested by some experienced traders, this EA's strategy uses its 3 built-in indicators to enhance its signals and decide to open a new order at the right time, there is an ADX indicator and you may choose its signal's strength, a parabolic SAR to help and confirm the trends and a MA to check if the prices are deviating from its patterns. By joining the 3 indicators' data, it is possible to calculate a good and strong trend direction, avoiding sudden market movements against your trading operations;
It is highly recommended for trend trading, however it also allows scalping;
You can define the orders limits of profits in currency value. It is much easier.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. This way you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours the EA should not trade (Time of Market Whatch).
Spread Limit to allow trading: where you define the maximum spread values to allow auto trading.

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: defines the spread limit to allow any auto trade if the spread value is higher then this input value, it will no trade. Disabled if = 0;
Magic Number: this parameter identifies the orders the EA is working with;

\r\n

Bad time to trade inputs:

\r\n

Defines the starting hour the EA will not trade (0..23h): defines the start hour of bad time to trade (hours only). Disabled if = -1;
Defines the ending hour the EA will not trade (0..23h): defines the end hour of bad time to trade (hours only). Disabled if = -1;

\r\n

Indicator's Inputs

\r\n

ADX used Period: the period ADX is working;
MA Period: the period used on Moving Average calculations;
ADX & SAR shit: ADX and SAR used shit;
Price applied: the price used on ADX, SAR and MA;
ADX Signal Strength: choose the ADX signal strength to allow the EA's trade operations;
SAR step: the step increment used by the SAR indicator;
SAR Maximum: the SAR superior.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M15, spread 15 and Hedging account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/29809", "small_icon": "https://c.mql5.com/31/248/mmm-adx-psar-and-ma-logo-60x60-1988.png", "middle_icon": "https://c.mql5.com/31/444/mmm-adx-psar-and-ma-logo-140x140-9139.png", "icon": "https://c.mql5.com/31/248/mmm-adx-psar-and-ma-logo-200x200-2184.png", "rating": 3, "price": 130, "published": 1528737641, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 29848, "title": "TrendStar", "description": "

This indicator is designed to help traders find the market entry and exit points. The indicator generates signals in the form of arrows, which is a simple and intuitive for use in trading. In spite of apparent simplicity of the indicator, it has complicated analytic algorithms which determine entry and exit points. Its operation is based on moving averages, RSI, candlestick patterns, as well as certain original developments. Open a Buy position when an upward arrow appears, and a Sell position when a downward arrow appears. The indicator generates timely entry signals on the current candle.

\r\n

Indicator input parameters:

\r\n

Strength - indicator period
Sound - enable/disable alerts
MobileAlert - enable/disable push notifications
EmailAlert - enable/disable email alerts

\r\n

The indicator does not repaint its values. Arrows always stay where they have appeared.

", "url": "https://www.mql5.com/pt/market/product/29848", "small_icon": "https://c.mql5.com/31/256/trendstar-logo-60x60-7447.png", "middle_icon": "https://c.mql5.com/31/440/trendstar-logo-140x140-3477.png", "icon": "https://c.mql5.com/31/256/trendstar-logo-200x200-1633.png", "rating": 0, "price": 64, "published": 1530639931, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29871, "title": "AirShip", "description": "

The AirShip indicator can help you to confirm the trend. The red dots mean uptrend, and the green dots mean downtrend. The AirShip indicator provides open and close positions signals when reaching overbought or oversold levels. It has a smart algorithm that detects the trend changes. If the trend reached the end of phase, the yellow dots will send you the notification. The AirShip indicator not only draw the red trend lines and the yellow trend lines using a multicriteria strength engine, but also combines it with multitimeframe trend analysis.

\r\n

The AirShip indicator is very easy to use. It does not redraw its signals.

\r\n

How to Trade

\r\n

You can trade in following modes:

\r\n

The distance between the red line and the yellow line is too large. The greater the difference between the two lines, the stronger the trend changes of yellow line.
Looking for the divergences in overbought and oversold levels.
If red line is under 25 and then crosses this level upwards, and the price is already above its simple moving average, this is a sign for the beginning of a new ascending trend.
If red line is above 75 and then crosses this level downwards, and the price is already below its simple moving average, this is a sign for the beginning of a new descending trend.
You can trade any timeframe you want.

\r\n

Indicator Parameters

\r\n

Trendcolordots - the best dots filter. The higher the value, the more \"noise\" in signals of trendcolordots. The dots will different.

Trendcolor dots 1 - the trend of long period.
Trendcolor dots 2 - the trend of Middle period.
Trendcolor dots 3 - the trend of Short period.
no color dots - hide the dots.

", "url": "https://www.mql5.com/pt/market/product/29871", "small_icon": "https://c.mql5.com/31/249/airship-logo-60x60-3697.png", "middle_icon": "https://c.mql5.com/31/445/airship-logo-140x140-4963.png", "icon": "https://c.mql5.com/31/249/airship-logo-200x200-2478.png", "rating": 0, "price": 218, "published": 1530293265, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 29890, "title": "MMM High Low", "description": "

MMM High Low strategy:

\r\n

The robot uses its built-in High-Low (HILO) indicator all the time and does a calculation to determine the prices trends. It sends an order, closes or moves the Trailing Stop loss position as the indicator works and indicates.
It will not send an order unless the calculations determine a good trend of profit.

\r\n

It protects your money because it is provided with:

\r\n

Trailing stop loss to protect your profit. Once your order has a positive profit, it sets SL at a certain distance in order to keep a positive profit;
Spread value limit to prevent opening an order at a high Spread value. Usually brokers uses variable Spread values;
minimum equity percentage to limit your risks. You may limit your investments and restrict it to a certain percentage of your money;
limits the number of pending orders. In case of Hedging accounts, you will not drawdown your account with too many pending orders.
Bad Time to Trade where you define the hours, minutes and day the EA should not trade (Market Watch).

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional take profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: use this parameter to define the maximum spread allowed in your operations, set it to 0 if you do not want to use it;
Magic Number: this parameter identifies the order the EA is working with.

\r\n

Bad Time To Trade

\r\n

Defines the starting hour the EA will not trade (0..23h): this input defines the starting bad hour the EA will not trade;
Defines the starting minute the EA will not Trade (0..59): this input defines the starting bad minute of the starting bad hour the EA will not trade;
Defines the ending hour the EA will not trade (0..23h): this input defines the ending bad hour the EA will not trade;
Defines the ending minute the EA will not Trade (0..59): this input defines the ending bad minute of the ending bad hour the EA will not trade;
Defines the BAD day of week to trade: this input indicates the day of the week the EA should not trade. The tests indicate that Friday is the worst day;

\r\n

Inputs

\r\n

From Bar: first bar where the indicator starts to work in the period;
To Bar: last bar where the indicator checks in the period;
Period to check the Bars: the period in minutes the bars will be checked for calculations.

\r\n

Attention! The default input values are already optimized for EURUSD at time frame M6, spread 15 and Netted account mode. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as you need.

", "url": "https://www.mql5.com/pt/market/product/29890", "small_icon": "https://c.mql5.com/31/249/mmm-high-low-logo-60x60-1425.png", "middle_icon": "https://c.mql5.com/31/444/mmm-high-low-logo-140x140-3512.png", "icon": "https://c.mql5.com/31/249/mmm-high-low-logo-200x200-5717.png", "rating": 0, "price": 150, "published": 1530034333, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29893, "title": "Unison Song", "description": "

Monitoring: https://www.mql5.com/en/signals/author/yarkan

\r\n

Peculiarities

\r\n

Based on correlation of two currency pairs (two or more currency pairs can be specified in the settings).
Trades two pairs simultaneously (pair trading).
Do not use indicators.
Correctly works only with the major currency pairs (having USD).
Open prices only (the EA explicitly controls bar opening).
Displays the trade information in the left corner of the chart

\r\n

Recommendations

\r\n

Do not use cross currency pairs
Timeframe: M1
Leverage 1:500
Rebate to refund part of spread or commission

\r\n

Parameters

\r\n

Pairs - set the pairs to trade.
Lot - initial lot.
LotIncrease - algorithm for increasing the lot.
HistoryBars - the number of bars in history for the EA to analyze to determine the entry point.
Limit - the higher the value, the smaller the number of trades and the smaller the probability of a large drawdown.
TargetProfit - target profit to close positions.
TargetLoss - loss to open positions with an increased lot.
MaxDrawdown - if the drawdown (margin*100/balance) is greater than MaxDrawdown, the EA will not open positions with the initial lot.

\r\n

Explanation

\r\n

Example for setting the Pairs parameter: EURUSD, GBPUSD, USDJPY, USDCAD, USDCHF, AUDUSD, NZDUSD.

\r\n

All positions are closed if the total profit of all positions is equal to TargetProfit (decreases in proportion to the number of open positions).

\r\n

If the loss of the first positions (with the initial lot) is greater than TargetLoss, new positions are opened with an increased lot.

\r\n

TargetLoss is increased in proportion to the number of open positions.

\r\n

Testing was performed in \"Every tick based on real ticks\" mode.

", "url": "https://www.mql5.com/pt/market/product/29893", "small_icon": "https://c.mql5.com/31/249/unison-song-logo-60x60-9944.png", "middle_icon": "https://c.mql5.com/31/446/unison-song-logo-140x140-4121.png", "icon": "https://c.mql5.com/31/249/unison-song-logo-200x200-6408.png", "rating": 0, "price": 500, "published": 1529949602, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 29957, "title": "Ultimate Double Top Bottom Reversal Indicator MT5", "description": "

This indicator is designed to detect high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

Double top and bottom patterns are chart patterns that occur when the trading instrument moves in a similar pattern to the letter \"W\" (double bottom) or \"M\" (double top). The patterns usually occur at the end of a trend and are used to signal trend reversals very early.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

For double tops with fake breakouts the highest price of the right shoulder must be higher than the left shoulder. For double bottoms with fake breakouts the lowest price of the right leg must be lower than the left leg.

\r\n

These special Double Tops/Bottoms are created by the smart money to accumulate its own position size. With the fake breakout the smart money traps as much traders on the wrong side of the market as possible. Then the smart money reverses the direction very sharply. The trapped traders are in panic and exit their position or even reverse their position. This makes the reversal very strong and profitable. The indicator detects exactly these games of the smart money and therefore gives you high probability entry signals.

\r\n

Please read also the blog post \"Professional Trading With Double Tops/Bottoms And Divergences!\" which explains the concepts behind the ULTIMATE Double Top/Bottom indicator and how you can use a professional top-down approach.

\r\n

The provided video shows many example signals and the maximum performance of the indicator.

\r\n

With maximum performance, I mean that this could have been the profit if you would have exited every trade at the optimal price level. Of course, this can’t be achieved during real trading conditions where you don’t know future price moves.

\r\n

But the video shows that the raw signals of the indicator (without visual filtering) produced 24 winning trades and only 11 losing trades. In the video, I count a trade as a winning trade if it reaches at least 1R profit (1R = initial risk of the trade). So, these raw signals would be already very profitable if you place the target for all trades at 1R and then leave the trade alone, without trying to find the optimal exit.

\r\n

This indicator draws the double tops/bottoms on the chart and gives alerts via Email, Push and via MT5-alert in the moment when a high probability double top/bottom entry signal is created.

\r\n

This indicator does NOT repaint. You can test it in the strategy tester. Then you will see that these good signals come in real-time on every trading instrument and on any timeframe!

\r\n

Tips:

\r\n

I use this indicator on M30 and higher. Then there is less noise in the price moves and I have usually more time to react on entry signals.
When a signal occurs then ask yourself if there is enough room for a big subsequent move in direction of the trend (support/resistance far away?).

\r\n

Parameters

\r\n

candlesCalculated: With this parameter you can define how many candles backward the indicator should show the double tops/bottoms. The default 2000 means that the indicator will show double tops/bottoms on the newest 2000 candles only.
alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\"-signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\"-signals for short entries
alertsViaMT5: True = Yes, False = No\t- if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email

", "url": "https://www.mql5.com/pt/market/product/29957", "small_icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-reversal-indicator-mt5-logo-60x60-5456.png", "middle_icon": "https://c.mql5.com/31/438/ultimate-double-top-bottom-reversal-indicator-mt5-logo-140x140-5461.png", "icon": "https://c.mql5.com/31/250/ultimate-double-top-bottom-reversal-indicator-mt5-logo-200x200-6160.png", "rating": 1, "price": 59, "published": 1529073741, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 29973, "title": "Lines for MT5", "description": "

Do you need to check support and resistance lines?

\r\n

Do you need to find them really fast and automatically?

\r\n

Do you want to set your own settings how to find them?

\r\n

Then this indicator is your right choice!

\r\n

Indicator Lines is developed for finding support and resistance lines on chart. It does its job quickly and fully automatically.

\r\n

Main principle of algorithm is to get all extremes on chart (according to \"Density\" parameter). Then indicator tries to find minimally 3 points (according to \"Minimal count of points\" parameter) which can be used for calculation of support or resistance line. Finally there is applied linear regression for construction of lines.

\r\n

Parameters

\r\n

Density - how much in details to search in extremes. Bigger number means less details, smaller number means more details. Base unit is 1 bar on the chart.
History - how far to go in history while searching. When you set -1, the indicator processes all bars from history. Base unit is 1 bar on the chart.
Range - how far search support and resistance lines from given extreme. Base unit is 1 bar on the chart.
Minimal count of points - how many extremes is used for construction of lines.
Maximal deviation - Difference between perfect line and real line. Base unit is %.
Color, width, style of lines
Prolong lines to future - great feature for checking breaking lines in future
Show points of lines - if you want to see how the lines are constructed
Color of points
Your own prefix for object - in case you want to attach more Lines on same chart

\r\n

Final line is constructed as linear regression from all found points.

", "url": "https://www.mql5.com/pt/market/product/29973", "small_icon": "https://c.mql5.com/31/250/lines-for-mt5-logo-60x60-6633.png", "middle_icon": "https://c.mql5.com/31/441/lines-for-mt5-logo-140x140-4731.png", "icon": "https://c.mql5.com/31/250/lines-for-mt5-logo-200x200-2655.png", "rating": 4, "price": 30, "published": 1529344083, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 30075, "title": "DynamicStep", "description": "

DynamicStep is a very simple Expert Advisor with a minimum of parameters.

\r\n

It works on netting accounts. Works on all timeframes.

\r\n

Its operation is based on following the market. Orders are opened on every candle. Thus, the position constantly changes following the market.

\r\n

The main objective is to optimize the bot in such a way as to always remain in the market trend. To do this, perform the optimization as often as possible. Changes in the market - changes in parameters.

\r\n

Only two parameters are to be optimized: Step and Limit.

\r\n

The robot requires a deposit of at $10000 for normal operation, as it needs to be able to open numerous orders.

\r\n

Parameters

\r\n

Risk – calculate the lot depending on the deposit.
Step – step for grid calculations.
Limit – restrict operation to one direction.
LongPr – close when reaching the specified profit for Long (in percent).
ShortPr – close when reaching the specified profit for Short (in percent).

", "url": "https://www.mql5.com/pt/market/product/30075", "small_icon": "https://c.mql5.com/31/251/dynamicstep-logo-60x60-1450.png", "middle_icon": "https://c.mql5.com/31/440/dynamicstep-logo-140x140-7262.png", "icon": "https://c.mql5.com/31/251/dynamicstep-logo-200x200-9401.png", "rating": 0, "price": 122, "published": 1529949616, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30086, "title": "VR Atr Pro MT5", "description": "

VR ATR Pro é um indicador técnico projetado para determinar níveis-alvo com base na análise estatística de períodos comerciais anteriores. Ele se baseia no cálculo matemático do movimento médio de preços durante um período de tempo selecionado.

Princípio de funcionamento do indicador, baseado em estatística

O funcionamento do indicador baseia-se na observação do comportamento diário do preço: cada período comercial é caracterizado por uma certa amplitude de movimento — o preço percorre uma certa distância em pontos tanto para cima quanto para baixo a partir do ponto de abertura.

Da mesma forma, pode-se supor que no início de cada novo período comercial, o preço tem uma \"autonomia\" condicional... por meio de um cálculo matemático simples, determina-se o valor médio... Esse valor médio não é uma garantia, mas serve como um ponto de referência, indicando o provável tamanho do movimento no período atual.

Assim, o indicador aplica esse princípio: ele analisa as oscilações históricas de preços durante um período de tempo selecionado, calcula o valor estatístico médio e exibe níveis no gráfico. Isso permite que o trader compreenda a força e a \"autonomia\" do instrumento financeiro no período atual.

Exibição do indicador

O indicador exibe dois níveis no gráfico:

Nível Superior — objetivo calculado para movimento de alta.
Nível Inferior — objetivo calculado para movimento de baixa.

Além disso, os níveis podem ser exibidos como áreas, o que permite considerar o desvio e obter uma faixa de preços-alvo.

Características principais

Os sinais são fixados após o término do período e não são alterados posteriormente.
Funciona com diversas classes de ativos: pares de moedas (Forex), metais, índices (CFD), futuros e criptomoedas.
Pode ser aplicado em qualquer intervalo de tempo.
Permite configurar a exibição de níveis exatos ou zonas.
Suporta o envio de notificações por meio de mensagens push para smartphones, e-mail e alertas padrão do terminal.
Versões funcionalmente idênticas estão disponíveis para MetaTrader 4 e MetaTrader 5.

Aplicação prática

O indicador pode ser usado como uma ferramenta auxiliar para:

Identificar possíveis zonas para a colocação de ordens de Take Profit e Stop Loss.
Avaliar o potencial de movimento do preço dentro de uma estratégia comercial existente.
Filtrar condições de mercado: atingir o nível calculado pode servir como sinal de esgotamento da força do movimento atual.

Recomendações

O período de cálculo do indicador (Indicator calculation timeframe) deve ser maior que o Timeframe no qual o indicador opera.
O melhor período para calcular o indicador é o Período PERIOD_D1.
Use o indicador em conjunto com seu sistema de negociação.
Coloque o Take Profit dentro dos níveis e o Stop Loss fora dos níveis.
Use um período de cálculo (Indicator calculation period) maior que 10 para obter resultados mais precisos.
Caso o preço ultrapasse um dos níveis, é recomendável interromper a negociação até o próximo período comercial.

VR ATR Pro é uma ferramenta de qualidade para avaliar o potencial intervalo de movimento do preço. Sua lógica é baseada na análise da volatilidade histórica, permitindo uma abordagem objetiva para a determinação de níveis-alvo. Como qualquer ferramenta analítica, requer a compreensão dos seus princípios de funcionamento.

Configurações do indicador

[+] === Main Settings === [+] - Configurações principais;

Indicator calculation period - Período de cálculo do indicador
Number of periods to display - Número de períodos a exibir
Indicator calculation timeframe - Período de tempo para cálculo do indicador
Show text labels - Mostrar rótulos de texto
Display type - Tipo de exibição

Percentage for area - Percentual para área
Show achieved targets - Mostrar metas alcançadas
Show potential number of points - Mostrar número potencial de pontos

[+] === Current Period Settings === [+] - Configurações do período atual;

Current uptrend figure color - Cor da figura de tendência de alta atual
Current uptrend figure line style - Estilo da linha da figura de tendência de alta atual
Current uptrend figure line thickness - Espessura da linha da figura de tendência de alta atual
Fill current uptrend figure - Preencher figura de tendência de alta atual
Current downtrend figure color - Cor da figura de tendência de baixa atual
Current downtrend figure line style - Estilo da linha da figura de tendência de baixa atual
Current downtrend figure line thickness - Espessura da linha da figura de tendência de baixa atual
Fill current downtrend figure - Preencher figura de tendência de baixa atual

[+] === Settings of periods in history === [+] - Configurações de períodos no histórico;

Uptrend figure color - Cor da figura de tendência de alta
Uptrend figure line style - Estilo da linha da figura de tendência de alta
Uptrend figure line thickness - Espessura da linha da figura de tendência de alta
Fill uptrend figure with color - Preencher figura de tendência de alta com cor
Downtrend figure color - Cor da figura de tendência de baixa
Downtrend figure line style - Estilo da linha da figura de tendência de baixa
Downtrend figure line thickness - Espessura da linha da figura de tendência de baixa
Fill downtrend figure with color - Preencher figura de tendência de baixa com cor

[+] === Other === [+] - Outros;

Text size - Tamanho do texto
Prefix - Prefixo

Versão para: MetaTrader 4

Seus comentários são os melhores agradecimentos para nós! Deixar um comentário.

Mais informações em blog.

", "url": "https://www.mql5.com/pt/market/product/30086", "small_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-60x60-3798.png", "middle_icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-140x140-2956.png", "icon": "https://c.mql5.com/31/1786/vr-atr-pro-mt5-logo-200x200-4625.png", "rating": 4.75, "price": 30, "published": 1529949418, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 30104, "title": "Pointer synchronization MT5", "description": "

Pointer synchronization MT5 is an indicator with which the pointer can be synchronized in all the visible graphics of the terminal. It shows a cross cursor on all the visible graphics of the terminal, in position relative to the cursor of the active graph.
To activate the indicator, simply press the button that appears in one of the corners of the chart once the indicator is added to the chart.
To deactivate the indicator, simply press the button again. Once the indicator has been deactivated, the crossed lines of all the charts will also disappear.
The color of the button and lines, the style of the lines, the width of the lines and the corner to display the button can be modified in the parameters.

It can be used together with Expert Advisors and other panels, such as Controller without limit MT5
MT4 version

Parameters

Button color: Set the colour of the button used to turn the indicator activate and deactivate.
Horizontal line and vertical line color: Set the color of the lines.
Informational text color: Set the colour of the informational text.
Turn off the indicator on one or more charts: Activate this parameter if you want to deactivate the indicator on one or more charts.
Informational text size: Set the size of the informational text.
Lines width: Set the width of the lines.
Line style: Set the style of the lines.
Button corner: Set the corner where you want the button to appear.
Informative: Informational parameter.

", "url": "https://www.mql5.com/pt/market/product/30104", "small_icon": "https://c.mql5.com/31/251/pointer-synchronization-mt5-logo-60x60-5643.png", "middle_icon": "https://c.mql5.com/31/440/pointer-synchronization-mt5-logo-140x140-7714.png", "icon": "https://c.mql5.com/31/251/pointer-synchronization-mt5-logo-200x200-1531.png", "rating": 3, "price": 30, "published": 1530204984, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 30108, "title": "Silkyway MT5", "description": "

Silkyway MT5 is an advanced expert advisor developed for MetaTrader 5 platform which complies strictly with the core rules of successful trading that isolate few winners from the majority of the investors. This is the MetaTrader 5 version of Silkyway MT4 The core strength of Silkway lies in its ability to preserve initial capital while sustainably growing investors equity.

\r\n

The strategy behind Silkway calculates how orders flow in the market and quickly reacts to the flow when it is safe to do so. This EA has been tested using different stress test with 99.90% tick data spanning over 10 years including Monte Carlo Robustness and worst case variable spread (with commission and slippage). With the MT5 platform the results are enhanced due to the nature of MetaTader 5 platform with possiblity to use the EA on a non-convential timeframes like M10 and M20. The test performed on this non-conventional time frame on MT5 has exceptionally good and impressive.

\r\n

No toxic or margin hugging technique, like Martingale, Averaging, Gridding, Zone Recovery Strategy.
The EA will always use a hard stop loss and have different early smart exit strategy to exit dwindling positions before it hits the stop loss and take profit. It also automatically adjusts itself 4 and 5 digit quotes.

\r\n

As a caveat, we do not make promises of profit for using this algorithm and like every other system out there, there will be a stagnation period that will span for days maybe weeks or month. Overall, the Silkway algorithm will weather the stagnation and the positive movement will eventually outweigh the stagnation time. Res Ipsa Loquitor, Our Live Performance Accounts will speak for itself . Nonetheless, you are encouraged to backtest and demo-trade with your broker to see what potential it has in a live environment with your desired broker first.

\r\n

Please allow WebRequest for listed URL and paste http://ec.forexprostools.com/ in the address box for the news filtering module to sync with algorithm.

\r\n

\r\n\r\n

Expert Recommendations
•    Server: Low latency VPS.
•   Symbol: EURSGD, AUDSGD, GBPSGD, GBPCHF, EURCHF.
•   Time Frame: Default expert setting optimized for M15, it will work also for M10, but you have to optimize and test which set file works best.
•   Broker: Low spread with commission.
•    Deposit: Greater than $200.
•    Leverage: Greater than 1:200.

\r\n

Input Parameters

OpenDirection: Long, short or long and shorts positions
DynamicLots: False for fixed lot or true for automatic lot calculation
Lots: If false in DynamicLots fixed lots will be used
RiskPerTrade: Percent of equity to risk per trade
HardSLPips: Solid stop loss
HardTPPips: Solid take profit
CloseProfitPips: Level in pips to consider closing an opened position
MaxSpreadPips: Maximum spread allowed in pips
SlippagePips: Maximum slippage allowed in pips
BrokerGMTOffset: Broker standard GMT offset hours - GMT+2/+3(EET)
BrokerDSTStart: Transition to DST
BrokerDSTEnd: Transition from DST
Comment: comment
Sell Early Exit Time: Sell early to maximize profit before spread expansion on short direction
Sell Early Exit Percent: Percentage of profit target to exit
Magic: Identifying trades from different expert advisors and when trading platform restarts
Display On Chart: Display spread, swap, balance and win rate on chart
Filling Mode: Mode on MT5 supported by your broker. select ORDER_FILLING_FOK if the broker does not allow ORDER_FILLING_IOC
Avoid trade on news: Enables the use of news filter engine

PS: Entropy MT5 has been designed to work for many instruments including metals, indices, and energy. However, for the sake of safety, it is not recommended to use this EA outside the recommended pair, risk, and time-frame described above. Please message me if you have any question or clarification to make.

", "url": "https://www.mql5.com/pt/market/product/30108", "small_icon": "https://c.mql5.com/31/276/silkyway-mt5-logo-60x60-6033.png", "middle_icon": "https://c.mql5.com/31/440/silkyway-mt5-logo-140x140-4328.png", "icon": "https://c.mql5.com/31/276/silkyway-mt5-logo-200x200-7612.png", "rating": 0, "price": 500, "published": 1534855584, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30129, "title": "ClassicTrader", "description": "

ClassicTrader is a universal and fully automatic Expert Advisor developed specifically for real Forex trading, which does not require any strict conditions or a specific broker. The minimum deposit is $100! The important advantage is frequent trading of large lots, which allows you to make additional profit on spread in partnership programs.

\r\n

You can run the robot on any symbols. All parameters can be optimized for any trading style. For other instruments, select the parameters on 2-3 year period with a forward period of 6 months before trading. Do not optimize parameters on a short period of time, this will lead to overfitting. If you want to globally optimize all parameters, use Open prices only first, since the work will be slow on all ticks or control points. The next refinement optimization can be made redundant by several parameters (kStepGrid [0.05.. 0.5], MinClose [0.01.. 0.7], SL and TP [100.. 250]).

\r\n

All tests on the screenshots are passed with a single setting - the one set by default but on different time intervals. Testing is performed with the minimum deposit of $100. Therefore, the drawdown may be somewhat larger than if you test with a deposit of $1000 or $10 000.

\r\n

The default settings are as follows: timeframe - M30, symbol - EURUSD, leverage - 1:100, minimum deposit - 100$.

\r\n

Features

\r\n

works with any broker;
the system can run with brokers providing floating spread;
the lesser the spread, the better - this applies to any trading system;
no need for fast VPS;
works on netting accounts;
applies loss limiting stop levels - loss limitation level is low;
uses only the best features from various systems, such as martingale, hedging, etc. SL and TP are always present;
good test results on various time intervals;
excellent results when tested in different ways;
no need to disable the robot during news;
does not require exceptional execution.

\r\n

ClassicTrader operation is based on one well-known strategy. The strategy focuses on a special trading algorithm and a limiting channel. The regression indicator is applied to form a trading channel. The number of opened orders can be adjusted in the parameters, by default there are two orders. The EA uses short and similar stop levels, stop loss is equal to take profit and is defined by SL and TP parameter. The robot can be used in different modes, including scalper. The EA can be easily configured for any trading style satisfying demands of any trader.

\r\n

For real trading and testing on real ticks, set MinClose to 0.25. When working with control points (draft testing), leave the default MinClose value (0.025).

\r\n

Options

\r\n

TypeFilling - order filling policy.
Magic - magic number.
Risk - calculate lot depending on a deposit. We recommend that you use Risk, rather than Lot, since the MinClose parameter is related to it.
Lot - lot size for entering the market (priority is higher than the Risk field).
LotExponent - ratio that defines the progressive lot increase.
LimitGrid - order limitations, either for a common grid, or for a martingale (any option is limited by stop levels).
kStepGrid - ratio that defines the minimum step between two orders and calculated as a % ratio relative to the SL and TP parameter.
MinClose - minimum profit that can be closed by a signal (in % of a deposit).
SL and TP - stop levels - stop loss is equal to take profit, so both levels are set by the single parameter.
DrawDown - maximum drawdown, at which closing occurs (in % of a deposit).
Degree - regression indicator parameter.
Kstd - regression indicator parameter.
Bars - regression indicator parameter.

\r\n

", "url": "https://www.mql5.com/pt/market/product/30129", "small_icon": "https://c.mql5.com/31/252/classictrader-logo-60x60-1734.png", "middle_icon": "https://c.mql5.com/31/445/classictrader-logo-140x140-9629.png", "icon": "https://c.mql5.com/31/252/classictrader-logo-200x200-1617.png", "rating": 0, "price": 120, "published": 1530204920, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30150, "title": "Renko Charting for MT5", "description": "

Renko indicator helps develop Renko charts on different symbols.

\r\n

Advantages

\r\n

Drag and drop the indicator on M1 timeframe of the symbol chart
Realtime updates
Indicator can be used for Expert Advisors and technical analysis
Backtest your strategy using Renko indicator

\r\n

Parameters

\r\n

BOX SIZE: Input the number of box size. The box size reflects the difference of the symbol price. So, a 50 box size would reflect a 5 pip value difference in a currency pair symbol
Show Wicks: If true, high or low of the bricks will also be shown.

\r\n

How to use

\r\n

Attach the indicator to a chart (timeframe M1) to create the Renko chart
Input box size to select the difference you want to use
Use Renko chart on M1 timeframe only.
Please go through the screenshots to understand the steps

\r\n

Details on benefits of renko charting, indicators and EAs are provided in the Comments section.

", "url": "https://www.mql5.com/pt/market/product/30150", "small_icon": "https://c.mql5.com/31/253/renko-charting-for-mt5-logo-60x60-4011.png", "middle_icon": "https://c.mql5.com/31/439/renko-charting-for-mt5-logo-140x140-2296.png", "icon": "https://c.mql5.com/31/253/renko-charting-for-mt5-logo-200x200-2792.png", "rating": 3.6666667461395264, "price": 30, "published": 1532448368, "popularity": 0, "category": "Utility", "votes": 3 }, { "id": 30162, "title": "PZ Multi Oscillator MT5", "description": "

O Multi-Oscillator é o melhor canivete suíço para negociação em várias moedas e prazos múltiplos. Ele plota o oscilador desejado para muitos pares de moedas e / ou prazos em um único gráfico. Pode ser usado para negociar arbitragem estatística, como uma ferramenta de triagem de mercado ou como um indicador refinado de múltiplos prazos. [ Guia de instalação | Guia de atualização | Solução de problemas | FAQ | Todos os produtos ]

Fácil interpretação e configuração
Suporta 16 indicadores conhecidos
Pode exibir até 12 pares de moedas no gráfico
Ele também pode exibir vários prazos de um único instrumento
Símbolos e prazos são personalizáveis nas entradas
Configurações personalizáveis do indicador do oscilador
Cores e tamanhos personalizáveis

Para oferecer uma ampla perspectiva de mercado, o indicador pode ser carregado várias vezes no mesmo gráfico usando diferentes osciladores, sem interferência. O indicador suporta os seguintes osciladores:

RSI
CCI
ADX
ATR
MACD
OSMA
DeMarker
Estocástico
Momentum
Índice de força
Índice de fluxo monetário
Volume da balança
Awesome Oscillator
Índice de Vigor Relativo
Oscilador do acelerador
Intervalo percentual de Williams

Este indicador oferece um potencial incomparável, porque cada buffer pode plotar a combinação desejada de oscilador, símbolo e período de tempo, não relacionada a outros buffers ou ao período de tempo local do gráfico. Você pode criar um modelo de gráfico para cada uma de suas estratégias com várias moedas e prazos, independentemente de sua aparente complexidade.

As capturas de tela a seguir ilustram os princípios básicos do indicador, bem como alguns exemplos de casos de uso, desde encontrar os pares de moedas mais interessantes de um conjunto até arbitragem estatística de negociação e exemplos de triagem de mercado.

Configurações

Ao carregar o indicador para qualquer gráfico, você será presenteado com um conjunto de opções como parâmetros de entrada. Não se desespere se você acha que eles são muitos, porque os parâmetros são agrupados em blocos auto-explicativos. Isto é o que cada bloco de parâmetros faz.

Configurações do indicador - Escolha o oscilador a ser exibido e a quantidade de barras a serem avaliadas quando o indicador for carregado no gráfico. Avaliar menos barras no carregamento significa que o indicador carregará mais rapidamente.
Configurações de símbolo - Digite os símbolos que você deseja exibir em cada buffer de indicador, conforme oferecido pelo seu corretor no seu terminal Metatrader. Você deve digitar pelo menos um símbolo e no máximo 12. Deixe em branco os buffers que não deseja usar. Na maioria das vezes, você definirá um símbolo diferente para cada buffer, a menos que deseje rastrear um único indicador em todos os períodos no mesmo símbolo; nesse caso, você precisará digitar o mesmo símbolo em todos os buffers.
Configurações do período de tempo - Escolha o período de cada buffer. Se você deseja que o oscilador mude com o período do gráfico, deixe o valor padrão atual . Por outro lado, se você deseja exibir um período fixo, independentemente do período local do gráfico, você deve selecioná-lo.
Configurações de entrada - configurações de indicador desejadas para todos os osciladores envolvidos.

Período RSI
Período CCI
Período ADX
Período ATR
Período MACD
Período OSMA
Período DeMarker
Período estocástico
Período de impulso
Período do índice de força
Período do Índice de Fluxo Monetário
Período de volume no balanço
Período impressionante do oscilador
Período do Índice de Vigor Relativo
Oscilador do acelerador
Intervalo percentual de Williams

Configurações de desenho - Escolha cores e tamanhos de linha das divergências.

Autor

Arturo López Pérez, investidor e especulador privado, engenheiro de software e fundador da Point Zero Trading Solutions.

", "url": "https://www.mql5.com/pt/market/product/30162", "small_icon": "https://c.mql5.com/31/252/pz-multi-oscillator-mt5-logo-60x60-1869.png", "middle_icon": "https://c.mql5.com/31/438/pz-multi-oscillator-mt5-logo-140x140-9875.png", "icon": "https://c.mql5.com/31/252/pz-multi-oscillator-mt5-logo-200x200-7357.png", "rating": 0, "price": 30, "published": 1530553261, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30179, "title": "LevelPAttern MT5", "description": "

LevelPAttern MT5 is a technical indicator based on the daily levels and Price Action patterns. The indicator is based on the standard ZigZag indicator + reversal candlestick pattens, such as Star, Hammer (also knows as Pin bar), Engulfing and others. The indicator generates audio and text notifications when a pattern is formed and a level is touched. It also supports sending email and push notifications.

\r\n

Indicator operation features

\r\n

It is suitable for working with any CFD and FOREX trading instrument. Recommended timeframe - H1, H4 and D1
Formation of a pattern, or level touching + formation of a pattern can be considered a market entry signal
When using this indicator, it is also necessary to take the global trend into account.

\r\n

Parameters

\r\n

number of bars in the history of the indicator - the number of bars analyzed for detection of the Price Action patterns
number of bars to search for levels - the number of bars for plotting levels based on the ZigZag indicator
maximum distance between levels - the maximum distance in points between the breaks (peaks) of the indicator
ZigZag color of daytime levels - color of the daily levels
color of Zigzag levels - color of the ZigZag levels
color of buy trend patterns - color of the patterns directed upward
color of sell trend patterns - color of the patterns directed downward
pat.:hammer - enable/disable the Hammer pattern (hm)

pat.:hammer:max body (in point) - the maximum size of a candle body in points
pat.:hammer:min shadow hammer handle (in % from sweep) - the minimum shadow of the Hammer handle as a percentage of the candle span
pat.:hammer:max shadow opposite hammer handle - the maximum shadow opposite to the Hammer handle as a percentage of the entire candle span

pat.:absorption - enable/disable the Engulfing pattern (abs)
pat.: clouds - enable/disable the Cloud pattern (cloud)

pat.:clouds:min body (in point) - the minimum body size in points
pat.:clouds:min body (in % from sweep) - the minimum body size as a percentage of the entire candle span

pat.:star - enable/disable the Star pattern (star)

pat.:star:min body (in point) - the minimum body size of side candles in points
pat.:star:min body (in % from sweep) - the minimum body size as a percentage of the side candles span
pat.:star:max body star (in point) - the maximum body size in points of the central candle
pat.:star:max body star (in % from sweep) - the maximum body size of the central candle as a percentage of the side candles span
pat.:star:max sweep star (in point) - the maximum span of the central candle in points
pat.:star: max sweep star (in % from the surrounding bars) - the maximum span of the central candle as a percentage of the side candles span

pat.:star(doji) - enable/disable the Start (Doji) pattern star(d)

pat.:star(doji):min body (in point) - the minimum body size of side candles in points
pat.:star(doji):min body (in % from sweep) - the minimum body size as a percentage of the side candles span
pat.:star(doji):max body star (in point) - the maximum body size in points of the central candle (can be 0)
pat.:star(doji):max body star (in % from sweep) - the maximum body size of the central candle as a percentage of the side candles span
pat.:star(doji):max sweep star (in point) - the maximum span of the central candle in points
pat.:star(doji):max sweep star (in % from the surrounding bars) - the maximum span of the central candle as a percentage of the side candles span

notice:alert - enable/disable alerts
notice:email - enable/disable email messages
notice:mobile app - enable/disable push notifications
ZigZag:Depth - Depth of the ZigZag indicator
ZigZag:Deviation - Deviation of the ZigZag indicator
ZigZag:Backstep - Backstep of the ZigZag indicator

", "url": "https://www.mql5.com/pt/market/product/30179", "small_icon": "https://c.mql5.com/31/257/levelpattern-mt5-logo-60x60-7792.png", "middle_icon": "https://c.mql5.com/31/440/levelpattern-mt5-logo-140x140-4901.png", "icon": "https://c.mql5.com/31/257/levelpattern-mt5-logo-200x200-6152.png", "rating": 0, "price": 150, "published": 1532366345, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30212, "title": "CrossCorrelation", "description": "

The indicator is designed to calculate the correlation between major pairs and display cross-pair of overbought or oversold labels on the price chart.

The idea is that strong divergences of major pairs lead to an exit from the \"equilibrium\" of the corresponding cross pairs. With sufficiently large divergences, which are displayed by the indicator, the cross-pair is usually corrected by entering the \"equilibrium\". For example: when working on EURAUD pair, the difference for the period specified in the settings for EURUSD and AUDUSD pairs is calculated and, if the difference exceeds the set threshold, the corresponding label is displayed on the chart. For major pairs, labels are displayed when the price changes by the set threshold.

\r\n

Red labels are displayed for the overbought zone and blue labels - for the oversold zone.

The indicator does not display (not always) immediate changes in the direction of the price movement, which should be confirmed by other methods (for example: reversal figures, margin levels).

\r\n

Parameters

bars to calc - number of bars to calculate the correlation (default is 240)
Levels (%) - percentage of major pairs divergence, above which the corresponding labels are displayed on the chart (default is 2).

", "url": "https://www.mql5.com/pt/market/product/30212", "small_icon": "https://c.mql5.com/31/253/crosscorrelation-logo-60x60-5922.png", "middle_icon": "https://c.mql5.com/31/446/crosscorrelation-logo-140x140-7159.png", "icon": "https://c.mql5.com/31/253/crosscorrelation-logo-200x200-4827.png", "rating": 1, "price": 30, "published": 1530724710, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30216, "title": "Neural", "description": "

Neural is a professional Expert Advisor, which implements the strategy of trading using neural networks and genetic algorithms. Machine learning is widely used in various fields and is intended to replace the human brain for solving complex problems of classification and prediction. Training of a neural network is performed on a data sample (historical data). The neural network save the trouble of constantly changing the strategy, it is sufficient to simply retrain the system for the current market situation. This product combines two modern programming technologies, such as genetic algorithms and neural networks. It also applies a cyclic scheme for changing the robot parameters, which makes it possible to characterize the robot as capable of adaptation to changes in the price function.

\r\n

Information on the operation principles is described in the beginning of the discussion.

\r\n

Getting Started

\r\n

It should be noted that testing is quite complex. Since it is quite time-costly, if the neural network is retrained every hour. In practice, it is only possible to test it to a certain approximation and to see the general operation principles. Therefore, the default settings in the robot are provided only for demonstration. The settings recommended for live trading are also provided. The difference is that the neural network takes a large history sample for live operation and learns much more accurately (and therefore longer). This takes a lot of time, and certain limits are present when testing. For live trading, however, everything is simpler, as there is enough time for hourly optimization. With the medium (recommended) parameters of the neural network and sample length, training takes 5-15 minutes. In this case, the learning speed depends on the CPU power. The robot can be run on any chart with the recommended parameters. Also, if the CPU is powerful enough and when working on timeframes higher than M5, the neural network complexity and the history sample can be increased. Increasing the complexity of the system only improves predictability.

\r\n

Parameters

\r\n

TypeFilling - order filling type.
Magic - magic number.
OnComment - enable comments on the chart.
ShowLine - display the result of the genetic algorithm in the form of limes.
OnBuy - enable only buy trades.
OnSell - enable only sell trades.
LimitSpread - spread limit (no entries above this value).
Lot - lot size for market entry (overrides Risk).
Risk - lot calculation depending on the deposit.
LotExponent - ratio that defines the progressive lot increase.
LimitGrid - limitation of the grid steps.
kStepGrid - coefficient fro limiting the number of points between consecutive orders.
kTP, kSL - coefficients for stop loss and take profit.
DrawDown - the maximum drawdown, at which closing occurs (in % of a deposit).
DrawUp - the maximum profit, at which closing occurs (in % of a deposit).
ReOptimizationNN - period of re-optimization.
InputDataRSI - data from the RSI indicator.
InputDataAD - data from the AD indicator.
InputDataSAR - data from the SAR indicator.
HistoryNN - size of the history sample (in bars).
InputNN - the number of neural network inputs.
StepNN - maximum steps of the neural network.
EpochNN - maximum epochs of the neural network.
DeltaNN - training accuracy of the neural network.
LevelSignal - threshold level of the neural network, which is perceived as a signal.
kMinimumGridStepProc - filter of price noise for the genetic algorithm.
ServerTimeFilter, StartHour, StartMin, FinalHour, FinalMin, FridayOn - limit the trading time by time of the day.

", "url": "https://www.mql5.com/pt/market/product/30216", "small_icon": "https://c.mql5.com/31/253/neural-logo-60x60-7582.png", "middle_icon": "https://c.mql5.com/31/441/neural-logo-140x140-1411.png", "icon": "https://c.mql5.com/31/253/neural-logo-200x200-2422.png", "rating": 5, "price": 200, "published": 1531154555, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 30221, "title": "Signal Noise Indicator", "description": "

O indicator Signal Noise é um oscilador, não parametrizado, gerado pelos ruídos máximo, mínimo e de fechamento para cada barra.

\r\n

Parâmetros de entrada:

\r\n

Período: é o período utilizado como referência pelo filtro passa baixa na detecção do sinal.

\r\n

Valores:

\r\n

High Noise: máximo ruído de alta;
Power High Noise: demonstra a força do sinal de alta, quando o menor ruído da barra ocorre na mesma direção do sinal;
Low Noise: máximo ruído de baixa;
Power Low Noise: demonstra a força do sinal de baixa, quando o menor ruído da barra ocorre na mesma direção do sinal;
Close Noise: valor do ruído no fechamento da barra.

\r\n

", "url": "https://www.mql5.com/pt/market/product/30221", "small_icon": "https://c.mql5.com/31/253/signal-noise-indicator-logo-60x60-9288.png", "middle_icon": "https://c.mql5.com/31/440/signal-noise-indicator-logo-140x140-5606.png", "icon": "https://c.mql5.com/31/253/signal-noise-indicator-logo-200x200-6530.png", "rating": 0, "price": 30, "published": 1530635907, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30245, "title": "Information panel for traders", "description": "

This utility displays the information required for making trades on each opened chart. For example: spread value, swap value; triple swap day; session closing time; ATR of the symbol by Gerchik; total profit/loss for the current symbol; the number of trades made earlier; the percentage change in the quotes of 6 selected instruments; and much more.

\r\n

The spread value is always shown. The rest of the information is displayed depending on the settings:

\r\n

Show total orders at the moment (long, short). If the broker provides such information, the utility shows the volume of long and short trades for the current day.
Show minimum stop: points (currency). Show the minimum stop distance (in points and in the profit currency) from the current price. For example, if the minimum stop is 5 cents, while the current price is $10, then you will not be able to set stop loss at $9.97, only at $9.94.
Show margin: in long, in shorts. Show the margin required to buy a minimum lot.
Display swap information: long - short - triple swap day. Show information about the swap (the amount to be paid for the position rollover) both for long and for short positions. It also shows the day of the triple swap for this instrument.
Display: session closing time (left until) - period. Display the trading closure time for the instrument, as well as the time left until the closure. If a timeframe smaller than daily is currently selected on the chart, then the utility also shows the number of minutes left until a new bar opens.
Apply the template we.tpl to the graphs. If enabled, a template with the name 'my' will be automatically applied to each opened chart.
Please note that before enabling this function, it is necessary to create the 'my' template. To do this, use the Templates/Save template… item of the chart's context menu.
The templates save the indicators, the selected scale, the chart type and other information, including the EA currently running on the chart. For this reason, do not create a template on a chart where this EA is running. Otherwise, when opening every new chart window, it will also launch this EA.
Show the bar panel of the new bar on the chart of the Expert Advisor. Show additional panel with information on new bar times for different timeframes on the chart where the EA is running. If any of the timeframes on the panel is ticked, then a sound signal will be played a minute before a new bar on the selected timeframe. You can quickly tick/untick a timeframe by pressing a corresponding number on the keyboard. For example, 1 - for M15, 2 - for M30, etc.
Notify about the completion of the order (both the take and the stop loss). Use a sound notification about reaching a take profit or stop loss level of current deals.
Display ATR for the given number of days (0 - no). Show the daily ATR of the instrument according to Gerchik. That is, without consideration of abnormally large or small bars.
Show bars on the chart for the specified number of days. Show a vertical line on the bar, separating the selected number of days. For example, with this setting you can visualize where the bars for the last 3 days end on the chart.
Show general direction on the specified symbols (D1, H4). Display the percentage change of quotes of 6 selected instruments for the day and for the last hour. This allows you to easily assess the overall market situation.
Show profitability of trades: currency (qty). Display the statistics on the deals previously made on the instrument: the amount of profit or loss, the total number of deals, the number of profitable and unprofitable deals.

\r\n

Simply attach the EA to one of th charts, and the selected information will be displayed on each chart. In this case, the display type depends on the value selected in the drop-down list The way information is displayed. You can display the information either in the chart comment (in the upper left corner) or in a separate panel in one of the four chart corners.

", "url": "https://www.mql5.com/pt/market/product/30245", "small_icon": "https://c.mql5.com/31/255/information-panel-for-traders-logo-60x60-8493.png", "middle_icon": "https://c.mql5.com/31/445/information-panel-for-traders-logo-140x140-9034.png", "icon": "https://c.mql5.com/31/255/information-panel-for-traders-logo-200x200-3826.png", "rating": 0, "price": 30, "published": 1531759822, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30255, "title": "MMM Zig Zag and CCI", "description": "

Warning! The default input values are already optimized for EURUSD at time frame M1, spread at 16 and hedged account mode with leverage 1:100 and initial deposit of US$ 500. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.
The EA's Strategy:

This expert advisor uses 2 built in indicators (Zig Zag and CCI) in order to work with strongger and precise signals. It sends an order, closes or moves the Trailing Stop loss position as the indicator works.
You can define the time period of each day of the week the EA should not trade (the bad time to trade). Usually the period of day when the impact news are published.

General Inputs

Closes orders with any profit of value (currency): this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0;
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: defines the maximum SPREAD value allowed to your trading operations. Set it to ZERO if you won't use it;
Magic Number: this parameter identifies the orders the EA is working with;
Double lots volume on gain limit: if > 0, increases volume, takeprofit and stoploss after every closed profitable position;

Bad time to trade (MARKET WATCH TIME)

The Starting hour the EA will not trade on Mondays (0..23h): this input defines the starting bad hour the EA will not trade. Disabled if = -1;
The Ending hour the EA will not trade on Mondays (0..23h): this input defines the ending bad hour the EA will not trade. Disabled if = -1;

The Starting hour the EA will not trade on Tuesdays (0..23h): this input defines the starting bad hour the EA will not trade. Disabled if = -1;
The Ending hour the EA will not trade on Tuesdays(0..23h): this input defines the ending bad hour the EA will not trade. Disabled if = -1;

The Starting hour the EA will not trade on Wednesdays (0..23h): this input defines the starting bad hour the EA will not trade. Disabled if = -1;
The Ending hour the EA will not trade on Wednesdays(0..23h): this input defines the ending bad hour the EA will not trade. Disabled if = -1;

The Starting hour the EA will not trade on Thursdays(0..23h): this input defines the starting bad hour the EA will not trade. Disabled if = -1;
The Ending hour the EA will not trade on Thursdays(0..23h): this input defines the ending bad hour the EA will not trade. Disabled if = -1;

The Starting hour the EA will not trade on Fridays(0..23h): this input defines the starting bad hour the EA will not trade. Disabled if = -1;
The Ending hour the EA will not trade on Fridays(0..23h): this input defines the ending bad hour the EA will not trade. Disabled if = -1;

Indicator's Inputs

Period used by the indicators: the period used to calculate signals;
Shift used by indicators: shift (number of bars) to calculate the Zig Zag signals;
Price applied on CCI calculatio: price applied on CCI calculations;
CCI up level: CCI up break level;
CCI low level: CCI low break level;

", "url": "https://www.mql5.com/pt/market/product/30255", "small_icon": "https://c.mql5.com/31/272/mmm-zig-zag-and-cci-logo-60x60-5497.png", "middle_icon": "https://c.mql5.com/31/441/mmm-zig-zag-and-cci-logo-140x140-4902.png", "icon": "https://c.mql5.com/31/272/mmm-zig-zag-and-cci-logo-200x200-1845.png", "rating": 0, "price": 125, "published": 1538277711, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30265, "title": "Ultimate Double Top Bottom Scanner MT5", "description": "

This indicator scans for you up to 15 trading instruments and up to 21 time frames for occurrences of the high probability reversal patterns: Double Tops/Bottoms with fake breakouts.

\r\n

What this indicator detects:

\r\n

This indicator detects a special form of Double Tops and Bottoms, so called Double Tops/Bottoms with fake breakouts.

\r\n

You can get alerts via MetaTrader 5, email and push notifications at the moment when a signal occurs on any timeframe and any trading instrument you have configured.

\r\n

You need to install this indicator on only one single chart. The indicator then scans up to 15 instruments and 21 time frames automatically for you! Of course, if you want to scan more than 15 instruments then you can add the scanner to another chart and scan more trading instruments.

\r\n

Important

\r\n

The purpose of this indicator is to alert signals so that you will be able to trade these signals even with a normal day job. Therefore, on live charts you will only see the dashboard view as shown in the video. This indicator will NOT draw signals on live charts.

\r\n

If you need the signals visible on live charts, then you can additionally purchase the Ultimate Double Top Bottom Reversal Indicator

\r\n

Parameters

\r\n

alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Bottom\" signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Double Top\" signals for short entries
alertsViaMT5: True = Yes, False = No - if true, then the indicator gives alerts via MetaTrader 5 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email
alertsViaPush: True = Yes, False = No - if true, then the indicator gives alerts direct to your mobile phone
alertsM1 - alertsMN1: True = Yes, False = No - if true, then the indicator searches for \"Double Top/Bottom\" signals on the appropriate time frame e.g. M1, M2 and so on. You can define which time frames will be checked.
templateName: - if you press a button on the chart (which contains the name of an instrument), then the appropriate chart will open and a template with the specified name will be attached
checkEveryXSeconds - every X seconds, the indicator checks the next instrument/timeframe for the occurrence of a \"Double Top/Bottom\" signal
i1-i15 - define up to 15 instruments, which will be monitored/checked for the occurrence of a \"Double Top/Bottom\" signal

", "url": "https://www.mql5.com/pt/market/product/30265", "small_icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-logo-60x60-6832.png", "middle_icon": "https://c.mql5.com/31/441/ultimate-double-top-bottom-scanner-mt5-logo-140x140-8144.png", "icon": "https://c.mql5.com/31/253/ultimate-double-top-bottom-scanner-mt5-logo-200x200-6556.png", "rating": 2, "price": 119, "published": 1530896442, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30284, "title": "ON Trade Gann Squares MT5", "description": "

O Indicador de Quadrados de Gann é uma poderosa ferramenta de análise de mercado baseada no artigo \"Fórmula Matemática para Previsões de Mercado\" escrito por W.D. Gann, que se baseia em conceitos matemáticos para análise. Ele incorpora elementos das técnicas de Gann relacionadas com os quadrados de 144, 90 e 52, bem como o quadrado de 9. Além disso, inclui o método do sobre como combinar o quadrado de 9 com canais e padrões de estrela.

Manual do Usuário e Modo de Uso:

Antes de usar este indicador, recomendamos que você leia o manual do usuário e entre em contato conosco para esclarecer qualquer dúvida. Você pode encontrar o manual completo em nosso site.

A versão completa para MT5 está disponível para compra, e também há uma versão gratuita para MT4 que você pode testar. Fornecemos links para ambas as versões para sua conveniência.

Principais Características e Funcionalidades:

O Indicador de Quadrados de Gann oferece um conjunto completo de ferramentas para sua análise de mercado, permitindo que você tome decisões informadas com base em conceitos geométricos e na teoria de Gann. Abaixo estão as principais características:

Análise do Quadrado de 9: O indicador pode traçar vários elementos relacionados ao quadrado de 9, incluindo linhas horizontais, padrões de estrela, grades e leques de Gann. Isso fornece uma representação visual dos conceitos geométricos de Gann no seu gráfico.
Quadrados de Gann: O indicador traça os quadrados de Gann de 52, 90 e 144, permitindo que você visualize e analise sua relação com as tendências de preços.
Padrão de Estrela de Gann Livre: O indicador permite que você trace uma estrela de Gann livre que pode ser movida diretamente no gráfico, fornecendo uma ferramenta dinâmica para identificar possíveis mudanças na tendência ou pontos de reversão.
Diamante de Gann: Além de outros elementos, o indicador também inclui a capacidade de traçar um diamante de Gann, aprimorando sua capacidade de identificar padrões únicos.
Calculadora de Lotes: O indicador inclui uma calculadora de lotes que ajuda você a determinar o melhor tamanho de lote para suas operações.
Painel Amigável ao Usuário: O indicador possui um painel amigável ao usuário que permite alternar entre opções como \"Quadrado de 144/90/52\", \"Quadrado de 9\", \"Estrela de Gann Livre\", \"Diamante de Gann\", \"Ferramentas de Numerologia\", \"Calculadora de Lotes\" e \"Informações da Conta\".
Gerenciamento de Dados: Todas as ações realizadas com o indicador são salvas em seu perfil de negociação, permitindo que você carregue e descarregue esses dados a qualquer momento. Você também pode redefinir todos os dados salvos com um único clique.

Personalização e Parâmetros:

O Indicador de Quadrados de Gann oferece uma variedade de parâmetros que permitem personalizar sua aparência e comportamento de acordo com suas preferências. Você pode ajustar configurações como cores, estilos e larguras para diferentes elementos, como ângulos, quadrados, padrões de estrela, canais e linhas horizontais.

Conclusão:

O Indicador de Quadrados de Gann é uma ferramenta versátil para traders interessados na análise de Gann e numerologia. Ao combinar princípios matemáticos e conceitos geométricos de Gann, o indicador amplia sua capacidade de identificar oportunidades de negociação potenciais e tomar decisões informadas. Para aproveitar ao máximo as vantagens deste indicador, recomendamos assistir aos nossos tutoriais em vídeo e ler os recursos em PDF disponíveis em nosso site.

Assim como com qualquer ferramenta de negociação, entender como usar efetivamente o indicador, praticar com dados históricos e se manter atualizado com as condições do mercado em tempo real ajudarão você a ter sucesso. Lembre-se de praticar uma gestão responsável de riscos junto com o uso de qualquer indicador ou estratégia de negociação.

", "url": "https://www.mql5.com/pt/market/product/30284", "small_icon": "https://c.mql5.com/31/1041/on-trade-gann-squares-mt5-logo-60x60-7534.png", "middle_icon": "https://c.mql5.com/31/1041/on-trade-gann-squares-mt5-logo-140x140-2834.png", "icon": "https://c.mql5.com/31/1041/on-trade-gann-squares-mt5-logo-200x200-1957.png", "rating": 5, "price": 150, "published": 1692615709, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 30288, "title": "Copy MT5 MT5", "description": "

Copier of deals from MetaTrader 5 to MetaTrader 5 (MetaTrader 4<->MetaTrader 4 version is available; with both versions, you can copy MetaTrader 5<->MetaTrader 4, MetaTrader 4<->MetaTrader 5, MetaTrader 5<->MetaTrader 5, MetaTrader 4<->MetaTrader 4).

\r\n

There is a demo version (restricting by grades and by lots)

\r\n

Works only in the mode of hedging

\r\n

Spread filter.
Select the best price (start copying positions with a profit or loss).
Configure the lot size, fixed or ratio-based (provider signals can be copied with an increased lot).
Configure order copying (include pending orders or copy only open positions).
Select of trading time.
Copy Take profit and Stop Loss or select custom values.
Add/remove suffixes and prefixes, and also replace symbols if they are different.
Time of order relevance.
Copy from one to several terminals.

\r\n

The copier runs both as the provider of trades (master) and the receiver of trades (slave).

\r\n

Settings for Master account

\r\n

Mode - select the operation mode: master or slave.
TimerMs - update frequency: writing for master, reading for slave.
AddPrefix - add a prefix to symbols on master.
AddSuffix - add a suffix to symbols on master.
DelPrefix - remove a prefix from symbols on master.
DelSuffix - remove a suffix from symbols on master.
ReplaceSymbols - replace symbols by the specified values on the master (separated by commas).
OffsetHourForMaster - offset of the time zone from master. For example, if the master account has a time zone greater by one hour, set a value of -1 to equalize master and slave.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

\r\n

Settings for Slave account

\r\n

Mode - select the operation mode: master or slave.
Account - master account number for copying its deals.
TimerMs - update frequency: writing for master, reading for slave.
RelevanceSec - order relevance time for copying, in seconds (if more time passed on the master after an order is opened, it will not be copied).
LimitOrders - copy limit orders; if disabled, only market orders are copied.
OrdersPlus - copy market orders with the specified profit in pips; 0 - disabled.
OrdersMinus - copy market orders with the specified loss in pips; 0 - disabled.
AllowableSpread - maximum allowed spread for copying.
MondayStart - time on Monday to start copying deals.
MondayFinish - time on Monday to stop copying deals.
TuesdayStart - time on Tuesday to start copying deals.
TuesdayFinish - time on Tuesday to stop copying deals.
WednesdayStart - time on Wednesday to start copying deals.
WednesdayFinish - time on Wednesday to stop copying deals.
ThursdayStart - time on Thursday to start copying deals.
ThursdayFinish - time on Thursday to stop copying deals.
FridayStart - time on Friday to start copying deals.
FridayFinish - time on Friday to stop copying deals.
FixedLot - applies only to slave accounts. If greater than zero, the specified fixed lot is used. If it is zero, then the lot size of the master multiplied by coefficient (LotCoef) is used.
LotCoef - coefficient to multiply the master lot.
Takeprofit - custom fixed take profit.
Stoploss - custom fixed stop loss.
TakeprofitFromMaster - use take profit values from deals on master.
StoplossFromMaster - use stop loss values from deals on master.
Slippage - slippage in points when opening deals.
Magic - if greater than zero on master, copies only the order with this magic number. On slave, simply opens deals with this magic number.

", "url": "https://www.mql5.com/pt/market/product/30288", "small_icon": "https://c.mql5.com/31/254/copy-mt5-mt5-logo-60x60-4016.png", "middle_icon": "https://c.mql5.com/31/440/copy-mt5-mt5-logo-140x140-9574.png", "icon": "https://c.mql5.com/31/254/copy-mt5-mt5-logo-200x200-9460.png", "rating": 0, "price": 30, "published": 1531415755, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30293, "title": "CheckOnlineStatus", "description": "

Check Online-Status monitors your terminal.

\r\n

If its connection to the server is interrupted for longer time, you will receive an email and/or a push notification, depending on what your settings. You can find out how long the terminal has been offline and can judge the quality of your brokers and/or the provider of your VPS after some time. Remember, the terminal manages and controls your money. Everything hangs in the air if it has no connection to the server!

\r\n

Check Online-Status displays the three important elements about the online status of the terminal:

\r\n

prev_calculated: sometimes the terminal sets prev_calculated to zero, forcing an indicator to recalculate the historical bars of the chart.
ping: Sometimes the terminal switches to another server of the broker.
connected: Displays the connection status. A '~' symbolizes an working connection, # a disconnection, that means the server is not responding by what ever reason. An '*' at the end of the line indicates that an e-mail has been sent.

\r\n

The last entry about the status is shown in the first line of their respective section. Displayed are the server time and the local time of the pc (vps).

\r\n

You can define the following input variables for the indicator:

\r\n

Number of mSec for OnTimer()[min=100] - To specify the time interval in milliseconds (mSec) after which Check Online-Status the online status is checked again. The minimum is 100 mSec, smaller values would unnecessarily overload the system. But remember that Check online status is activated by OnCalculate() (every new tick) and OnTimer().
Show Status as Comment on Chart (Yes/No) - Display of information as comment on the main chart.
Print Status Changes to the Exert-Log (Yes/No) - Print the messages to the expert log.
Minutes of Disconnection to Send Mail, 0=no Mails - E-mails are sent if the terminal is not connected to the server for longer than the entered number of minutes. 0 means that no e-mails will be sent.
Minutes of Disconnection to Send Push, 0=no Push - Push notifications are sent if the terminal is not connected to the server for longer than the entered number of minutes. 0 means that no push notifications will be sent.

\r\n

If the indicator displays the status on the chart as a comment, you see:

\r\n

In the top line you see the name of the directory of your terminal (the first 6 characters), the server of your broker, the settings and whether a connection currently exists or not.
Below that the three sections: 1) the loaded bars of the actual chart, 2) the recent ping and 3) the connection.

\r\n

If available, the last 6 events are displayed, each in one line. In the image of the chart you can see for example that the terminal lost the connection to the server (the demo server of MetaQuotes) on Saturday 30 June 2018 at 22:10:42 and was able to restore it about 3 minutes later. Both times emails and/or push notifications were sent because the interruption lasted longer than the set 1 minute.

\r\n

The Emails and the Push-Notification

\r\n

In the subject of the email you see:

\r\n

MAIL-T1 MetaQuotes-Demo, 2018.06.30 22:13 connected

\r\n

T1 is the directory (respectively its first 6 characters) of the terminal, then follows the name of the server and the time at which the email was sent.

\r\n

In the body of the email you see the last 6 lines about the connections the same way you seem them on the chart:

\r\n

~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:13:16    MetaQuotes-Demo: ..4074  *\r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:10:42     MetaQuotes-Demo: ..4074  *\r\n~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:08:51    MetaQuotes-Demo: ..4074  \r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:08:03     MetaQuotes-Demo: ..4074\r\n~ Connected     ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:01:50    MetaQuotes-Demo: ..4074  \r\n# ConnBroke    ServTime: 2018.06.29 23:59:56     locTime: 2018.06.30 22:01:45     MetaQuotes-Demo: ..4074

\r\n

Push notifications have a subject line, but, due to the limitation to 255 characters, only the latest status message!

\r\n

After a push notification has been sent, the next one can only be sent 1 minute later. This is to prevent too many push notification being sent.

\r\n

I hope it helps you!

\r\n

PS.: Please note further information at the beginning of the discussion!

", "url": "https://www.mql5.com/pt/market/product/30293", "small_icon": "https://c.mql5.com/31/254/checkonlinestatus-logo-60x60-6074.png", "middle_icon": "https://c.mql5.com/31/442/checkonlinestatus-logo-140x140-9932.png", "icon": "https://c.mql5.com/31/254/checkonlinestatus-logo-200x200-7096.png", "rating": 0, "price": 30, "published": 1531154542, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 30295, "title": "Doji Engulfing Paths Mt5", "description": "

Doji Engulfing Paths enables to get signals and data about the doji and the engulfing patterns on charts. It makes it possible to get opportunities from trends, and to follow the directional moves to get some profits on the forex and stocks markets.

\r\n

It is a good advantage to take all the appearing opportunities with reversal signals and direct signals in order to obtain some profits on the forex market.

\r\n

System features

\r\n

With fast execution, it allows to register directly the information about the new doji patterns on a chart and starts with the last candle available before the current candle or bar on the chart.

\r\n

The utility shows a sign on the chart in order to indicate where the doji is located on this chart.

\r\n

It enables to get the same functions with the engulfing patterns: it could precisely indicate with a graphical object and sign on the chart the positions of new engulfing patterns.

\r\n

Recommendations

\r\n

First, select the maximal number of previous candles and bars to display on the charts.

\r\n

The maximum is 1000 bar shifts, previously to the current bar. The result will be the display of the exact locations of dojis and engulfing patterns on the technical charts.

\r\n

Special addition

\r\n

The Doji Engulfing Paths is a utility that could run independently to other available and additional EAs and indicators on the selected list of charts.

\r\n

It enables to follow the direction of the trend and select entry levels for reversals of instruments available and the correct period of time with timeframes. When a doji appears on an uptrend for example, it is the right period of time to go for a reversal and open a short position on the instrument.

\r\n

According to the directions, when an engulfing pattern occurs on an uptrend and with the same direction, it is possible to continue the directional move and to go to open a long position on this trend move.

\r\n

That is supposed to enable profits on the forex market.

\r\n

Inputs

\r\n

num_Of_Shifts: number of bars to display
color_Doji_PL: color of the signal for uptrends and downtrends with dojis\r\n
- clr_Green_H
- clr_Aqua_H
- clr_Orange_H
- clr_Beige_H
- clr_Violet_H
\r\n
color_Engulfing_Up: color of the signals for uptrends with engulfings\r\n
- clr_Green_H
- clr_Aqua_H
- clr_Orange_H
- clr_Beige_H
- clr_Violet_H
\r\n
color_Engulfing_Down: color of the signals for downtrends with engulfings\r\n
- clr_Red_LH
- clr_Yellow_LH
- clr_LightViolet_LH
- clr_Magenta_LH
- clr_LightYellow_LH
\r\n
Signals: list of signals to display, only dojis, only engulfing, or both of the systems\r\n
- mode_Doji_H: only dojis
- mode_Engulfing_Up: only engulfing on up directions
- mode_Engulfing_Down: only engulfing on down directions
\r\n

", "url": "https://www.mql5.com/pt/market/product/30295", "small_icon": "https://c.mql5.com/31/254/doji-engulfing-paths-mt5-logo-60x60-1718.png", "middle_icon": "https://c.mql5.com/31/446/doji-engulfing-paths-mt5-logo-140x140-6681.png", "icon": "https://c.mql5.com/31/254/doji-engulfing-paths-mt5-logo-200x200-1447.png", "rating": 0, "price": 45, "published": 1532962974, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30305, "title": "Snake EURUSD", "description": "

Snake EURUSD Real EA is a fully automatic Forex Trading Expert Advisor. The robot can run on any pair, but the results are better on EURUSD M15. The system can run with any broker that also provides Floating Spread.

\r\n

Advantages

\r\n

The EA does not use systems like martingale, hedging, etc.
The EA uses SL and Trailing Stop to make a profit.
In addition, you can also set TP (EURUSD at 93 for me).
Best test results with 99.0% in the backtest.
It is not necessary to close the EA during the press releases.
The magic number should be changed for every other pair (when two pairs work with the EA).
The EA works 24 hours a day and should be issued by hand on Friday.

\r\n

Recommendation

\r\n

\r\n The robot has several parameters that affect the quality of the terminations.
\r\n
Example:
\r\n
You can optimize the trading time settings in different tenses.
\r\n
Parameters should not be optimized within a short time, this leads to overfitting.

\r\n

Properties

\r\n

Entry lots=0.01 — fixed lots.
Stop Loss (pips)=54 — distance to stop loss.
Take Profit (pips)=0 — distance to take profit.
RVI Signal — entry signal
RSI Signal — entry signal
MACD Signal — entry signal
Stochastic — entry signal

\r\n

Trading hours: Optimize the trading margin in the tester to get the best quality of the entries.

\r\n

If you have purchased the product and/or have questions, send me a private message.

", "url": "https://www.mql5.com/pt/market/product/30305", "small_icon": "https://c.mql5.com/31/254/snake-eurusd-logo-60x60-1187.png", "middle_icon": "https://c.mql5.com/31/445/snake-eurusd-logo-140x140-3230.png", "icon": "https://c.mql5.com/31/254/snake-eurusd-logo-200x200-4534.png", "rating": 0, "price": 4500, "published": 1531501830, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30350, "title": "TrendSwing", "description": "

TrendSwing is a professional Expert Advisor, which implements the strategy of trading using neural networks. Operation principle - following the market. Using a neural network, it is possible to generate signals in such a way that every signal in the market appears in the right direction. The position is adjusted all the time. When a signal opposite to the existing position appears, the summary position is adjusted (that is, the position is opened in parts and closed also in parts). Thus, the EA constantly follows the price.

\r\n

In order to diversify the funds efficiently, it is recommended using the multicurrency operation mode, at which multiple currency pairs are selected, thus reducing the risk. The Expert Advisor correctly handles errors and reliably works with a deposit of 1000 USD and higher. You can start working on a five-minute chart.

\r\n

In this case, the configuration of the neural network is very simple. Training takes place during optimization. Adjustment of the neural network's weights is stored in the settings.

\r\n

Training of the neural network (optimization) is required for work! Optimization by Open prices is sufficient. Works with Netting accounts!

\r\n

The EA does not use dangerous strategies such as averaging or martingale, but strictly adheres to the neural network instructions. Stop loss and take profit are set for each trade. The Expert Advisor correctly handles errors and reliably works with a deposit of 1000-10000 USD and higher. The default working timeframe is H1. But any other timeframe or currency pair can be used. The higher the timeframe the better the predictability.

\r\n

Training of a neural network is performed on a data sample (historical data). The training process follows a genetic algorithm and as it goes on, the network reaction to input signals should be improving. It remains only to check how accurately the optimized parameters predict the future. This is done by a step-by-step verification of results. Markets change, therefore, it is necessary to constantly modify the strategies. The neural network save the trouble of constantly changing the strategy, it is sufficient to simply retrain the system for the current market situation.

\r\n

Parameters

\r\n

TypeFilling - sets order filling type.
Magic - sets the magic number.
LimitSpread - spread limit.
Risk - lot calculation depending on the deposit. We recommend that you use Risk, rather than Lot.
Lot - sets lot size for market entry (overrides Risk).
TP, SL - Stop Loss and Take Profit.
DrawDown - the maximum drawdown, at which closing occurs (in % of a deposit).
DrawUp - the maximum profit, at which closing occurs (in % of a deposit).
IndicatorA, IndicatorB, IndicatorC - three indicators for analysis.
TFIndicatorA, TFIndicatorB, TFIndicatorC - timeframes of the indicators.
ShiftIndicatorA, ShiftIndicatorB, ShiftIndicatorC - shifts of the indicators.
PeriodIndicatorA, PeriodIndicatorB, PeriodIndicatorC - periods of the indicators.
LevelSell - level for entering the market by a sell signal from a neural network.
LevelBuy - level for entering the market by a buy signal from a neural network.
wb0 - wb11 - weights for the neural network (these are the settings that store the logic of the neural network directly in the .set file).

\r\n

Parameters for optimization with a Custom target:

\r\n

OPT_TRADES, OPT_BALANCE_DD, OPT_EQUITY_DD - Minimum (trades, drawdown by balance, drawdown by equity) for the corresponding parameter.
CORRECT_TRADES, CORRECT_BALANCE_DD, CORRECT_EQUITY_DD - adjustment of the target by the corresponding parameter.

", "url": "https://www.mql5.com/pt/market/product/30350", "small_icon": "https://c.mql5.com/31/254/trendswing-logo-60x60-5039.png", "middle_icon": "https://c.mql5.com/31/439/trendswing-logo-140x140-2959.png", "icon": "https://c.mql5.com/31/254/trendswing-logo-200x200-5202.png", "rating": 0, "price": 160, "published": 1531759787, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30353, "title": "Triton", "description": "This robot is designed for major currency pairs and trades three strategies. 1- swing, 2- gap, 3- support and resistance. It uses the algorithm for analysis of price data and finds the best parameters. Trades are filtered by results of analysis of daily and monthly chart for the last 12 periods.

The Swing strategy can be used on TF H1 or M30, or also on M15 or M5 (more trades but higher risk)
The Gap strategy is recommended on M30 or H1
The Sup./Res. strategy is recommended on M30, H1 or H4

Default settings can be used for EURUSD, GBPUSD and USDJPY on the M30.

Do not use this EA with a broker who averages multiple positions into one position !

MT4 version:https://www.mql5.com/en/market/product/44133

Settings

UseSwing - Trading the Swing strategy
Swing_TimeFrame - Time Frame for Swing
UseSR - Trading the Support and Resistance strategy
SR_TimeFrame - Time Frame for SR
UseGap - Trading Gap strategy
Gap_TimeFrame - Time Frame for Gap
MinGap - Minimum gap size in points
Start trading, hour - you can set trading time
Start trading, minute - you can set trading time
End trading, hour - you can set trading time
End trading, minute - you can set trading time
Start pause, hour - you can set pause / no trading
Start pause, minute - you can set pause / no trading
End pause, hour - you can set pause / no trading
End pause, minute - you can set pause / no trading
Use Close time - Turns on Close time function
Close time, hour - Close all trades at this time each day, hour
Close time, minute - Close all trades at this time each day, minute
Max.spread size - maximum allowed spread size
Max.total of trades - maximum number of open trades
Execution Order Type - order execution type (contact your broker if necessary).

Trades BUY - allows trading long / BUY
Trades SELL - allows trading short / SELL

:::::::: Money management::::::::

Lot - primary Lot size
AutoLot - automatic Lot calculation based on account size
AutoLot Balance % - Percentage of account balance for AutoLot calculation.If you use this EA on 3 pairs, set it to 33%, etc.
Min. distance of next trade - in points
Lot x - multiplication Lot of next trade
TP all trades - when more than one trade is opened, all closes in this profit in points
Multipair closing - allows closing of trades on other markets (loss vs. profit)
TP - Target profit in points
SL - Stop Loss in points
AllSL - StopLoss in the points of all trades together, 0 is off
AllClose by DD% - Set the maximum allowed drawdown for this EA (loss in% of balance). Then all trades of this EA will be closed.
DD alert % - Displays a warning when this drawdown.
SafeClosing - if the trade is in a loss for a long time, it will be closed when the profit is 0 + commission + swap.(recommended)
TP1 Lot% - closes part of a trade in profit, set % of Lot
TP1 - closes part of a trade in this profit of points
SL1 Lot% - closes part of a trade in loss, set % of Lot
SL1 - closes part of a trade in this loss of points
SL on BE - in this profit (in points) moves SL to the opening price of the trade
SL on BE + - \"SL on BE\" function moves SL to this profit in points
TrailingSL start profit - in this profit in points begin to move the SL
TrailingSL distance - moves SL at this distance from the current price
TrailingSL step - moves SL after these steps, in points
TrailingTP start loss - in this loss in points begin to move the TP
TrailingTP distance - moves TP at this distance from the current price
TrailingTP step - moves TP after these steps, in points
Magic - the identification number of trades
comment - a comment to trade

Example for AutoLot function:

Settings

Lot = 0.02
AutoLot = 500
Your account balance is 1000
The trade size will be 0.04 Lot
Your account balance is 1500
The trade size will be 0.06 Lot
Your account balance is 2000
The trade size will be 0.08 Lot

Example for Multipair closing function:

It tracks trades of the whole account, which have same the first two numbers of the Magic numbers.

Market situation:

EURUSD - Magic 5511 - trade BUY is loss 100 points
GBPUSD - Magic 5522 - trade SELL is profit 130 points

The first two numbers of the Magic numbers are the same (55), so both trades will be closed at a total profit of 30 points (setting TP all trades = 30)

", "url": "https://www.mql5.com/pt/market/product/30353", "small_icon": "https://c.mql5.com/31/254/triton-logo-60x60-7551.png", "middle_icon": "https://c.mql5.com/31/447/triton-logo-140x140-6483.png", "icon": "https://c.mql5.com/31/254/triton-logo-200x200-6738.png", "rating": 5, "price": 490, "published": 1531154365, "popularity": 0, "category": "Expert", "votes": 4 }, { "id": 30380, "title": "Swing Wave MT5", "description": "

Swing Wave MT5 is an automated Expert Advisor.

This expert advisor is based on volatility trading strategies.
Price level mechanism that generates returns using reverse trading when reaching certain price levels.
This EA contains many strategies as well as internal settings that are available.
The Expert Advisor does not use martingale, grids, hedging, averaging and other risky strategies.
Automatic risk management with stop loss and profitability hidden in the system.
Protected by a volatility stop loss and take profit.

Key Features

Trades on timeframe: M15
Trades on any pair, recommended EURUSD
Initial deposit: $100 up
Using real tick data in backtest with 100% modeling quality
It is recommended to use a low spread ECN Broker

Parameters

MagicNumber - Magic number to set the ID for each EA
Lot_MM - set as \" auto lot or fixed lot \"
Lot - lot size
Risk - risk percentage
SL_MM - set \"SL_Input/SL_Default\"

SL_Input - enter a parameter value
SL_Default- for automatic setting
SL- stop loss ,pips

TP_MM - set \"TP_Input/TP_Default\"

TP_Input - enter a parameter value
TP_Default - for automatic setting
TP- take profit ,pips

MaxSpread - maximum allowable spread
MaxSlippage - maximum allowable slippage
MinBars - minimum bars required
TradePercent - percentage of Account Free Margin to trade
Start_Hour - set time to start hour
Start_Min - set time to start minute
End_Hour - set time to end hour
End_Min - set time to end minute
BrokerGMTOffset - Your Broker GMT Offset, When back-testing your EA, set \"BrokerGMTOffset\" to zero. When you run your EA live, make sure the GMT Offset parameter is correct for your broker's time.

", "url": "https://www.mql5.com/pt/market/product/30380", "small_icon": "https://c.mql5.com/31/437/swing-wave-mt5-logo-60x60-6677.png", "middle_icon": "https://c.mql5.com/31/437/swing-wave-mt5-logo-140x140-4243.png", "icon": "https://c.mql5.com/31/437/swing-wave-mt5-logo-200x200-6025.png", "rating": 0, "price": 50, "published": 1593009552, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30412, "title": "R747 BreakLevels MT5", "description": "

R747 BreakLevels is smart indicator that automatically detects Support and Resistance levels on actual market trend. \r\nStrength of levels can be easily adjusted by changing parameter LevelsStrength in range of 2 (weak levels) and 50 (strong levels).

\r\n

This indicator is accessible in EA via iCustom functions and is fully customizable by user.

\r\n

There is possibility to send Push notifications and Alerts of newly found levels.

\r\n

\r\n\r\n\r\n

\r\n

Follow this link to get all detailed information: >> \r\n LINK <<

\r\n

\r\n\r\n\r\n

Features

\r\n\r\n\r\n

Adjustable strength of levels
Can be used in EA via iCustom function
Multi time-frame
Any type of trading instrument
Alerts
Push notifications
Adjustable colors

\r\n\r\n\r\n

\r\n

Watch my other products:

\r\n

https://www.mql5.com/en/users/sevenfourseven/seller

\r\n

\r\n\r\n\r\n

Indicator Buffers:

\r\n\r\n\r\n

#0: Value[0] - Resistance level price
#0: Value[1] - Support level price

\r\n\r\n\r\n

\r\n

Parameters

\r\n\r\n\r\n

LevelsStrength: Strength of levels
DrawLevels: Enable/Disable painting level lines
ResistanceColor: Color of resistance level
SupportColor: Color of support level
ShowInfo: Enable/Disable text info of level prices
TextColor: Color of text
EnableAletrs: Enable/Disable Alerts
EnablePushNotify: Enable/Disable Push notifications
Magic: Unique magic number if using more instances on same chart

\r\n

", "url": "https://www.mql5.com/pt/market/product/30412", "small_icon": "https://c.mql5.com/31/384/r747-breaklevels-mt5-logo-60x60-6057.png", "middle_icon": "https://c.mql5.com/31/445/r747-breaklevels-mt5-logo-140x140-2552.png", "icon": "https://c.mql5.com/31/384/r747-breaklevels-mt5-logo-200x200-9962.png", "rating": 0, "price": 30, "published": 1531242859, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30422, "title": "PlugnTrade Si", "description": "

Plug’n’Trade Si is a trading robot with a minimum amount of input parameters.\r\n The robot is designed for trading the USD futures contract (Si) on FORTS.

\r\n

Plug’n’Trade applies technical indicators for a mathematical analysis of the price movement. The EA automatically sets the stop loss level, moves SL to breakeven and takes profit. Plug’n’Trade works on the M15 chart. All computations are performed when a new candle forms.

\r\n

This robot does not require optimization and is easy to use.

\r\n

Instructions and Recommendations

\r\n

Plug’n’Trade should be running on a valid Si contract with the M15 period. The robot performs all calculations when a new candle forms. Therefore, the robot should be enabled before each new candle forms.

\r\n

The robot does not change the contract automatically. Therefore, close a trade on an expiring contract and launch the robot on a new one.

\r\n

I recommend launching a robot on a virtual MetaTrader server not to miss entry or exit points which is most important when the robot takes profit.

\r\n

Parameters

\r\n

Volume – fixed volume (the number of traded contracts) to be used by the robot if dynamic volume is disabled.
Dynamic Volume – dynamic volume. If enabled, the robot uses the specified percentage of the account balance. If the balance grows, the traded volume increases automatically, and decreases in case of a drawdown.
% of balance to use – percentage of the account balance to be used for trading, if the dynamic volume is enabled.

", "url": "https://www.mql5.com/pt/market/product/30422", "small_icon": "https://c.mql5.com/31/255/plugntrade-si-logo-60x60-1122.png", "middle_icon": "https://c.mql5.com/31/440/plugntrade-si-logo-140x140-5794.png", "icon": "https://c.mql5.com/31/255/plugntrade-si-logo-200x200-6630.png", "rating": 0, "price": 150, "published": 1531416234, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 30462, "title": "Fibonacci Manager by Investio", "description": "

What was IFM created for

\r\n

Our goal in creating IFM was to provide the tool to manage your Fibonacci Retrecements and other Fibo tools in MetaTrader 5. This indicator allows you to edit all of the settings without getting into it by right click on the tool. That is faster and easiest way to manage objects on your chart.

\r\n

Inputs

\r\n

Font size - change font size of texts on the IFM panel. This is necessary, because some of users change font size in Windows settings
Description of the Fibo levels (variable: F - level, %$ - price)

default - \"F | %$\" - so description will look like that \"61.8 | 1.1300\"

30 inputs for your Fibo ratios - define your own ratios, which will be presented at the panel
Colors of the IFM Panel - customize IFM to your own preferences

Font color - color of all texts at the panel, without buttons
Background color
pressured button color - background color of pressed button
Font color of the pressed button
Not pressed button color - background color of released button
Font color of the not pressed button

\r\n

How IFM works

\r\n

The IFM Panel appears when you one-click on a chosen Fibo tool. So, after you implemented IFM on the chart, you have to click (not double click!) on one of your Fibonacci Retracement or other Fibo Tool. IFM will select this specific Fibo tool and present you a panel with all the options. Every one of them will change parameters of only this one Fibo tool.

\r\n

\r\n\r\n

Important!

\r\nIf you are using the option \"Select object by single mouse click\" in charts options, it will be causing problems with IFM. You should unmark this checkbox.

\r\n

With one click, you can add or remove the Fibonacci level!

\r\n

Investio Fibonacci Manager (IFM) solves one of the biggest MetaTrader issues - adding and removing Fibo ratios. You can add or remove a level from the Fibonacci Retracements or all other Fibo tools with one click. Just click on the selected level in the list. You can also edit this list and adapt it to your needs!

\r\n

You can define and memorize as many as 30 of your levels!

\r\n

MetaTrader allows adding 32 Fibo levels to your grid. Two are mandatory: 0% and 100%, so you can add 30 more levels. If you use less standard ratios or negative ones, enter them in the settings window and save these settings so that you can reload them in the future.

\r\n

You can change the look of your Fibo tool in a quick and easy way!

\r\n

Investio Fibonacci Manager gives you the ability to set any color from the Webcolor palette available in MetaTrader 5 with one click! You can also change the style and thickness of the line. Remember that these settings also work for other Fibo tools - Fibonacci Fan, Ranges, Fibonacci Time Zones, Fibonacci Arc and Fibonacci Channel.

\r\n

We went a step further and prepared ready-made levels for measuring the ranges of waves according to Elliott!

\r\n

IFM defines ratios that you can quickly turn on when you measure specific ranges. This is an extremely useful thing when you use Elliott Wave. With one click, you can disable measuring the end of wave A or wave B or C. Similarly, you can do that for the 5th wave range measured from the 1st or 4th wave. All this makes using the Fibo tools even easier!

\r\n

You can also change the IFM colors to better suit your desktop

\r\n

The color of each element of the Investio Fibonacci Manager is editable. Investio colors are set by default.

", "url": "https://www.mql5.com/pt/market/product/30462", "small_icon": "https://c.mql5.com/31/256/fibonacci-manager-by-investio-logo-60x60-4867.png", "middle_icon": "https://c.mql5.com/31/440/fibonacci-manager-by-investio-logo-140x140-9443.png", "icon": "https://c.mql5.com/31/256/fibonacci-manager-by-investio-logo-200x200-2744.png", "rating": 4, "price": 40, "published": 1532098192, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30597, "title": "Open Interest for tester MT5", "url": "https://www.mql5.com/pt/market/product/30597", "small_icon": "https://c.mql5.com/31/257/open-interest-for-tester-mt5-logo-60x60-9851.png", "middle_icon": "https://c.mql5.com/31/439/open-interest-for-tester-mt5-logo-140x140-7618.png", "icon": "https://c.mql5.com/31/257/open-interest-for-tester-mt5-logo-200x200-3189.png", "rating": 0, "price": 30, "published": 1532698811, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 30621, "title": "Excessive Momentum Indicator MT5", "description": "

Introduction

Excessive Momentum Indicator is the momentum indicator to measure the excessive momentum directly from raw price series. Hence, this is an extended price action and pattern trading. Excessive Momentum Indicator was originally developed by Young Ho Seo. This indicator demonstrates the concept of Equilibrium Fractal Wave and Practical Application at the same time. Excessive Momentum detects the market anomaly. Excessive momentum will give us a lot of clue about potential reversal and breakout opportunity. The great advantage of Excessive momentum is that it is simple and easy to use. It can go well with most of known techncial analysis including trend indicators, oscillators, Fibonacci trading, harmonic pattern trading, volume spread analysis, Elliott Wave pattern, etc.

Input Settings

A. Indicator settings

Bars To Scan: amount of candle bars to calculate the indicator
Momentum Strength Factor: Momentum Strength is the strength of Excessive Momentum to detect. It stays between 0.1 and 0.5. In theory it can go up to 1.0. But you will not get many signals to trade. The default setting is 0.1. You can try various Momenum Strength Factor to optimize your trading performance if you wish.
Equilibrium Fractal Wave Scale: This input controls the size of Fractal Wave when we detect the excessive momentum. If you put bigger number, then you get less signals to trade. The default setting is 0.5.

B. Graphic settings

Use White Chart: to use white chart, set to true, otherwise, just set to false
Excessive Momentum High Color: Excessive Momentum line color when peak (high) is detected
Excessive Momentum Low Color: Excessive Momentum line color when trough (low) is detected
Auto Fibo Color: Color of Automatic Fibnacci Retracment in your chart

How to use

In the indicator, we provide the automatic Fibonacci retracement to gauge the potential reversal opportunity. Hence, you can readily combine the classic Fibonacci trading setup with our Excessive momentum indicator. Do remember that excessive momentum line is the important support and resistance for your trading. Even though you have measured the Fibonacci ratio correctly for the potential reversal opportunity, the price must cross the excessive momentum line for confirmation. Sometimes, price can bounce off from the excessive momentum line. In this case, we get another reversal trading opportunity from excessive momentum line. Just treat the excessive momentum line as sensible support and resistance for your trading.

Some additional tools to help your trading

With excessive momentum indicator, oscillators like RSI and CCI can be used as secondary confirmation tools. This is the basic requirement for your trading.

With Harmonic Pattern and Elliott Wave pattern

If you want to use Excessive momentum indicator together with Harmonic pattern or Elliott Wave pattern, just replace the Fibonacci retracement with your harmonic pattern or Elliott wave pattern measurement (you will need to use external software for this). Alternatively, you can use Fibonacci retracement together with Harmonic pattern and Elliott wave pattern if you wish.

Trading Strategy Guide

If you want to use Excessive momentum indicator, we also provide the volume spread anlaysis tool kit to assit further with your momentum trading. The volume spread analysis tool kit is available for both free and paid version. You can find the details about them from the link below:

Strategy Guide 1: https://www.mql5.com/en/blogs/post/750346

Strategy Guide 2: https://www.mql5.com/en/blogs/post/750390

Important Note

", "url": "https://www.mql5.com/pt/market/product/30621", "small_icon": "https://c.mql5.com/31/262/excessive-momentum-indicator-mt5-logo-60x60-1673.png", "middle_icon": "https://c.mql5.com/31/441/excessive-momentum-indicator-mt5-logo-140x140-7404.png", "icon": "https://c.mql5.com/31/262/excessive-momentum-indicator-mt5-logo-200x200-9540.png", "rating": 5, "price": 200, "published": 1532448693, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 30681, "title": "OrderBook History Library", "description": "

Order Book, known also as Market Book, market depth, Level 2, - is a dynamically updated table with current volumes of orders to buy and to sell specific financial instument at price levels near Bid and Ask.

MetaTrader 5 provides the means for receiving market book from your broker, but in real time only, without access to its history. The library OrderBook History Library reads market book state in the past from archive files, created by OrderBook Recorder. The library can be embedded into your indicators and expert advisers (source codes are required), and then they can be tested with the market book data in the tester.

In particular, the library is used in the indicator OrderBook Cumulative Indicator and demo expert adviser OrderBook History Playback.

Here is an example of the header file for including the library into your MQL program:

input string OrderBook_FileFolder = \"Books\";\r\ninput bool OrderBook_UseCommonFiles = false;\r\ninput int OrderBook_TimeZoneCorrection = 0;\r\n\r\ntypedef void (*pOnBookEvent)(const string &symbol);\r\n\r\n#import \"OrderBook History Library.ex5\"\r\nvoid OrderBook_Init(pOnBookEvent ptr, const string folder, const bool common, const int offset);\r\nbool OrderBook_MarketBookAdd(string symbol);\r\nbool OrderBook_MarketBookRelease(string symbol);\r\nbool OrderBook_MarketBookGet(string symbol, MqlBookInfo &bookArray[]);\r\nlong OrderBook_MarketBookPeek(string symbol, MqlBookInfo &bookArray[]);\r\nvoid OrderBook_OnTick();\r\nvoid OrderBook_OnTimer();\r\nbool OrderBook_CheckForEvents(datetime current);\r\n#import\r\n\r\n#ifdef ORDERBOOK_SUBSTITUTE\r\n#define MarketBookAdd OrderBook_MarketBookAdd\r\n#define MarketBookRelease OrderBook_MarketBookRelease\r\n#define MarketBookGet OrderBook_MarketBookGet\r\n#endif

The input parameters are defined for convenience - they should be passed into the function OrderBook_Init.

OrderBook_FileFolder - a name of the root folder, where subfolders and files of the market books are stored; by default - \"Books\"; every subfolder is named according to specific work symbol; for example, the ticker GAZP will form the files MQL5/Files/Books/GAZP/*.hob;
OrderBook_UseCommonFiles - an option for reading files from the data folder of the current terminal (false, by default) or from the common data folder for all terminals (true);
OrderBook_TimeZoneCorrection - a correction of date and time, which is required in case, that archives are read in a terminal with a timezone, which differs from a timezone of the terminal where the archives were created; specified in seconds; for example, if the market book was saved with the server time in GMT+3, and then it's applied on quotes from a server, where time is in GMT+2, the correction should be 1 hour (-3600 seconds), because times in GMT+2 go 1 hour late in comparison to (i.e. they are 1 hour smaller than) GMT+3; 15:00 in GMT+3 is 14:00 in GMT+2;

Functions

OrderBook_Init - initialization of the library, should be called from OnInit; the first parameter should be the event handler OnBookEvent;
OrderBook_MarketBookAdd, OrderBook_MarketBookRelease, OrderBook_MarketBookGet - analogous functions to corresponding standard MQL functions; while working online, the standard functions are called internally - this way, emdedding the library will not alter the source code logic; while working in the tester, the library retrieves data from the files; the subscription for market book for current chart's symbol only is allowed;
OrderBook_MarketBookPeek - similar to OrderBook_MarketBookGet, but always reading data from files - both in the tester and online; MarketBookGet is never called;
OrderBook_OnTick - optional execution of the library for latest tick from OnTick; only for the tester, online does nothing;
OrderBook_OnTimer - optional execution of the library for latest known time from OnTimer; only for the tester, online does nothing;
OrderBook_CheckForEvents - optional execution of the library from the tester and online, ad hoc - for specified date and time;

Adding the line #define ORDERBOOK_SUBSTITUTE into the source code before including the header file will implicitly replace all calls of the standard market book function with corresponding library's functions.

Due to a well-known bug of MQL5 Market, all libraries are downloaded into MQL5/Scripts/Market folder, not into MQL5/Libraries, where they should be. Please copy the library's ex5-file manually into MQL5/Libraries folder in order for imports to work properly.

", "url": "https://www.mql5.com/pt/market/product/30681", "small_icon": "https://c.mql5.com/31/258/orderbook-history-library-logo-60x60-2054.png", "middle_icon": "https://c.mql5.com/31/445/orderbook-history-library-logo-140x140-5220.png", "icon": "https://c.mql5.com/31/258/orderbook-history-library-logo-200x200-6580.png", "rating": 3, "price": 69, "published": 1532535871, "popularity": 0, "category": "Library", "votes": 2 }, { "id": 30682, "title": "OrderBook Cumulative Indicator", "description": "

\r\n

MetaTrader 5 provides the means for receiving market book from your broker, but in real time only, without access to its history. The indicator OrderBook Cumulative Indicator accumulates market book data online and visualizes them on the chart. In addition, the indicator can show the market book on the history, by reading archive data, created by OrderBook Recorder. The indicator is based on the library OrderBook History Library, which can be embedded into your expert or indicator.

\r\n

The archive files can be stored in the data folder of the terminal (usually, it looks like C:\\Program Files\\MetaTrader 5 MetaQuotes\\MQL5\\Files), or in the common data folder for all terminals (for example, 'C:\\Users\\<UserName>\\AppData\\Roaming\\MetaQuotes\\Terminal\\Common\\Files'). In either case, inside the folder another subfolder is used as a root for all market books, and the name of the subfolder is specified in the input parameter OrderBook_FileFolder, by default - \"Books\". Inside the root subfolder another level of subfolders is created - each subfolder corresponds to a specific work symbol, and every single day data is saved in a file YYYYMMDD.hob, where YYYY, MM, DD are year, month, day correspondingly. The extension \"hob\" stands for History of Order Book. For example, the ticker GAZP will produce the files MQL5/Files/Books/GAZP/*.hob.

\r\n

Parameters

\r\n

ShowHistory - an option to enable market book view on the history, based on the archive; by default, false - disabled, that is the indicator collects and displays online data;
ShowHistoryFrom - a date to start searching the archives from while showing market books on the history (when ShowHistory is enabled);
CharCode - a character code to display indicator's marks; it can be any symbol from the Wingdings font or -1; by default -1, which means that numeric bullets with values from 1 to 10 are displayed, denoting relative volume size;
AveragingPeriod - a period for averaging values from the market book using exponential moving average, continuously; by default - 0, which means that accumulation and averaging of the data is performed separately for every bar; when a bar is completed, previous statistics are discarded, and volumes are averaged from scratch;
OrderBook_FileFolder - a name of the root folder, where subfolders and files of the market books are stored; by default - \"Books\"; every subfolder is named according to specific work symbol;
OrderBook_UseCommonFiles - an option for reading files from the data folder of the current terminal (false, by default) or from the common data folder for all terminals (true); use the common folder for tests in the local tester;
OrderBook_TimeZoneCorrection - a correction of date and time, which is required in case, that archives are read in a terminal with a timezone, which differs from a timezone of the terminal where the archives were created; specified in seconds; for example, if the market book was saved with the server time in GMT+3, and then it's applied on quotes from a server, where time is in GMT+2, the correction should be 1 hour (-3600 seconds), because times in GMT+2 go 1 hour late in comparison to (i.e. they are 1 hour smaller than) GMT+3; 15:00 in GMT+3 is 14:00 in GMT+2;

", "url": "https://www.mql5.com/pt/market/product/30682", "small_icon": "https://c.mql5.com/31/260/orderbook-cumulative-indicator-logo-60x60-9385.png", "middle_icon": "https://c.mql5.com/31/438/orderbook-cumulative-indicator-logo-140x140-8239.png", "icon": "https://c.mql5.com/31/260/orderbook-cumulative-indicator-logo-200x200-5915.png", "rating": 5, "price": 49, "published": 1532536790, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 30686, "title": "MMM Bollinger Bands MACD and MA", "description": "

The EA strategy

\r\n

This EA has a built-in combined Bollinger Bands Trend indicator, MACD and MA that checks the prices trends everytime and opens and closes new orders at the right time;
Recommended for beginner traders because the default input values are optimized to work with acconts with ballance as low as US$ 300;
It protects your profit because it is provided with Trailing Stop Loss, Minimum Equity Percentage to allow any trade, Maximum Spread alowed and you can also define the bad time to trade where you define the hours you don't want the EA to trade.

\r\n

Parameters

\r\n

General Inputs

\r\n

Closes orders with any profit of value (currency): this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Maximum number of simultaneous orders to open: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Maximum Spread to allow any Trade: defines the maximum SPREAD value allowed to your trading operations. Set it to ZERO if you won't use it;
Magic Number: this parameter identifies the orders the EA is working with;

\r\n

Bad time to trade

\r\n

Defines the starting hour the EA will not trade (0..23h): this input defines the starting bad hour the EA will not trade;
Defines the starting minute the EA will not Trade (0..59): this input defines the starting bad minute of the starting bad hour the EA will not trade;
Defines the ending hour the EA will not trade (0..23h): this input defines the ending bad hour the EA will not trade;
Defines the ending minute the EA will not Trade (0..59): this input defines the ending bad minute of the ending bad hour the EA will not trade;
Defines the BAD day of week to trade: this input indicates the day of the week the EA should not trade. The tests indicate that Friday is the worst day;

\r\n

Indicator's Inputs

\r\n

Price applied to all indicators: the price used on Bollinger Bands, MACD and MA;

\r\n

MACD Inputs

\r\n

MACD Open Level: the open oscilation level;
MACD Close Level: the close oscilation level;
MACD Fast EMA Period: period used by MACD fast EMA;
MACD Slow EMA Period: period used by MACD slow EMA;
MACD Signal Period: period of MACD signal;
MACD Shift: shift used on MACD indicator;

\r\n

MA inputs

\r\n

MA Trend Period: the trend period used on MA calculations;
MA Shift: the shift used on MA calculations;

\r\n

Bollinger Bands Inputs

\r\n

Bollinger Bands Period: the period used on Bollinger Bands;
Bollinger Bands Deviation: the deviation used on Bollinger Bands;
Bollinger Bands Shift: The shift (number of bars) used on Bollinger Bands calculations.

\r\n

Warning! The default input values are already optimized for EURUSD at time frame M15, current spread and netted account mode with leverage 1:100 and initial deposit of US$ 300. Always use the strategy tester optimization to set the best values for your assets, time frame, spread and account mode. It is very important and strongly recommended for successful trading. Optimize the input values as your needs.

", "url": "https://www.mql5.com/pt/market/product/30686", "small_icon": "https://c.mql5.com/31/257/mmm-bollinget-bands-macd-and-ma-logo-60x60-1657.png", "middle_icon": "https://c.mql5.com/31/446/mmm-bollinger-bands-macd-and-ma-logo-140x140-8901.png", "icon": "https://c.mql5.com/31/257/mmm-bollinget-bands-macd-and-ma-logo-200x200-2785.png", "rating": 0, "price": 84, "published": 1532359016, "popularity": 0, "category": "Expert", "votes": 0 } ], "total": 19293 }

Customizable Indicator parameters

IndCorrelationTable

Parâmetros do Indicador

Parameters

Recommendations

The logic

Parameters

Pairs and Timeframe

Requirements and Recommendations

Parameters

Parameters

Trading strategy

EA parameters

Parameters

Recommend

General Inputs

Components

Basic Usage Guidelines

Features

Types of Data

Types of Signals

Parameters

Settings

Indicator buffers

Timing Is Everything In Trading\r\n

Advantages You Get

How To Trade

Advanced Statistics Calculation

Parameters

User Manual

Input parameters

Currently supported events

Available Alerts

Indicator Parameters

Currently supported events

Available Alerts

Indicator Parameters

Parameters

General Inputs

Options

Recommendations on trading

Settings

Recursos

Parâmetros de entrada

Parameters

Main features

Inputs

Note

General TCP usage scenario

Parameters

The Parameters as follows

Parameters\r\n

Clipboard

MMM Ichimoku EA strategy

It protects your money because it is provided with

General Inputs

Bad time to trade inputs

Indicator's inputs

Features

Input Settings

Utility parameters

How to Trade

Indicator Parameters

General Inputs

Peculiarities

Recommendations

Parameters

Explanation

Parameters

Parameters

Parameters

Princípio de funcionamento do indicador, baseado em estatística

Exibição do indicador

Características principais

Aplicação prática

Recomendações

Configurações do indicador

Input Parameters

Features

Options

Timing Is Everything In Trading
\r\n

Parameters
\r\n

Milhares de robôs de negociação, indicadores e outros aplicativos prontos para fazer operações de negociação

Preços

ForexGenerated

IndCorrelationTable

Flat Martingale MT5

Perforation Modify

EA Sato MT5

ReversMartinTral

Hedge MA

MMM RVI and MA

Multi Chart Refresh Mt5

RoundLock EA MT5

Order grid

MMM RSI x Parabolic SAR

Supply and demand

Universal Signal Dashboard

Harmonic Volatility Indicator MT5

Extremum catcher MT5

PipFinite Impulse PRO MT5

Quick trade report separately by symbols 5

DeMarker Alerts MT5

MFI Alerts MT5

Black Box EURUSD morning MT5

MMM MFI and Moving Averages

Black Box EURUSD evening MT5

SwingExpert for MT5

EA Mbot News Trader MT5

Double divergence scanner MT5

Black Box XAUUSD evening MT5

Smart Scroll

Velox

Trader Control Panel

Gauge Classic Series

Corridor BARs MT5

MMM Ichimoku Kinko Hyo

Extreme Breakout EA

Creating orders with a fixed stop in dollars

MMM Adx PSar and MA

TrendStar

AirShip

MMM High Low

Unison Song

Ultimate Double Top Bottom Reversal Indicator MT5

Lines for MT5

DynamicStep

VR Atr Pro MT5

Pointer synchronization MT5

Silkyway MT5

ClassicTrader

Renko Charting for MT5

PZ Multi Oscillator MT5

LevelPAttern MT5

CrossCorrelation

Neural

Signal Noise Indicator

Information panel for traders

MMM Zig Zag and CCI

Ultimate Double Top Bottom Scanner MT5

ON Trade Gann Squares MT5

Copy MT5 MT5

CheckOnlineStatus

Doji Engulfing Paths Mt5

Snake EURUSD

TrendSwing

Triton

Swing Wave MT5

R747 BreakLevels MT5

PlugnTrade Si

Fibonacci Manager by Investio

Open Interest for tester MT5

Excessive Momentum Indicator MT5

OrderBook History Library

OrderBook Cumulative Indicator

MMM Bollinger Bands MACD and MA