{ "from": 9864, "count": 72, "list": [ { "id": 2599, "title": "Fibonacci Moving Bars 5", "description": "

This indicator is based on the same idea as https://www.mql5.com/en/market/product/2565, but instead of Average Bars it uses series or Fibonacci sequence.

\r\n

When the previous Price Close is above the previous indicator Bar, the probability to go Long is very high.

\r\n

When the previous Price Close is under the previous indicator Bar, the probability to go Short is very high.

", "url": "https://www.mql5.com/es/market/product/2599", "small_icon": "https://c.mql5.com/31/13/fibonacci-moving-bars-5-logo-60x60-2514.png", "middle_icon": "https://c.mql5.com/31/439/fibonacci-moving-bars-5-logo-140x140-8067.png", "icon": "https://c.mql5.com/31/13/fibonacci-moving-bars-5-logo-200x200-3276.png", "rating": 0, "price": 50, "published": 1389620935, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2583, "title": "Brilliant Keltner Channel", "description": "

This indicator draws the Keltner Channel using the rates chart calculated from any other timeframe.

\r\n

The available Moving Averages are:

\r\n

Simple Moving Average
Exponential Moving Average
Smoothed Moving Average
Linear Weighted Moving Average
Tillson's Moving Average

\r\n

Moving Average line is coded into RED or BLUE according to its direction from the previous candle.

\r\n

Example: User can display the Keltner Channel calculated on the basis of a Daily (D1) chart on a H4 chart.

\r\n

NOTE: Timeframe must be higher than the current timeframe of the chart, otherwise the indicator will draw nothing.

", "url": "https://www.mql5.com/es/market/product/2583", "small_icon": "https://c.mql5.com/31/13/brilliant-keltner-channel-logo-60x60-5300.png", "middle_icon": "https://c.mql5.com/31/439/brilliant-keltner-channel-logo-140x140-2814.png", "icon": "https://c.mql5.com/31/13/brilliant-keltner-channel-logo-200x200-7476.png", "rating": 0, "price": 30, "published": 1389613637, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2582, "title": "Tick by Tick 5", "description": "

This indicator is designed for M1 timeframe and shows:

Sum of points when the price goes up (Green Histogram).
Sum of points when the price goes down (Red Histogram).

In other words, by the number and ratio of bullish points to bearish ones, you can do a technical analysis of the state of the market.

If the green histogram prevails over the red one, you can conclude that at the moment the buyers are stronger than the sellers, and vice versa, if the red histogram prevails over the green, the sellers are stronger than the buyers.

", "url": "https://www.mql5.com/es/market/product/2582", "small_icon": "https://c.mql5.com/31/13/tick-by-tick-5-logo-60x60-3435.png", "middle_icon": "https://c.mql5.com/31/439/tick-by-tick-5-logo-140x140-4425.png", "icon": "https://c.mql5.com/31/13/tick-by-tick-5-logo-200x200-6906.png", "rating": 0, "price": 50, "published": 1389610003, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2574, "title": "Actual COMBO Depth of Market AND Tick Volume Chart", "description": "

Este producto le ayudará a comprar con beneficio y usar dos productos más populares para el análisis de los volúmenes de las peticiones y operaciones en los mercados de equidad:

\r\n

Actual Depth of Market Chart
Actual Tick Footprint Volume Chart

\r\n

Este producto ha integrado toda la potencia de cada uno de los indicadores y se ofrece como un archivo único.
\r\n

\r\n

Las rebajas anticrisis. ¡Hoy el precio del producto está rebajado! ¡Dese prisa!

\r\n

Las capacidades funcionales del producto Actual COMBO Depth of Market AND Tick Volume Chart coincide totalmente con los indicadores originales. ¡Usted apreciará la comodidad de combinación de estos dos productos formando un super indicador! Pues, éstas son las capacidades funcionales que conseguirá:

\r\n

Actual Depth of Market Chart

\r\n

Esta herramienta profesional de los mejores corredores de bolsa ahora está disponible en la plataforma MetaTrader 5. El indicador Actual depth of market chart visualiza la Profundidad del Mercado (DOM, por sus siglas en inglés) en forma del histograma que se coloca en el gráfico del precio y se actualiza en tiempo real.

\r\n

Gracias al indicador Actual depth of market chart Usted podrá evaluar las peticiones de los jugadores del mercado directamente en el gráfico de cotizaciones, así como ver las peticiones grandes de los creadores del mercado (market makers). Eso le permitirá realizar el scalping con una finísima precisión y estar seguro de una correcta colocación de las órdenes Stop para sus posiciones.

\r\n

El indicador muestra las peticiones de compra y venta en forma de las barras del histograma horizontal usando dos colores correspondientes (compra-venta). Las barras se muestran en el gráfico de precios y su longitud corresponde al volumen total de las peticiones en este nivel. El volumen de las peticiones de compra y venta más grandes se indica adicionalmente.

\r\n

El indicador muestra el número total de las peticiones de compra y venta en forma del gráfico-área con acumulación. Eso permite evaluar el volumen total de las peticiones que será cubierto al pasar a otro nivel de precios. El volumen total de las peticiones de compra y venta también se muestra en el gráfico. Además, el indicador Actual Depth of Market visualiza la relación actual de los volúmenes de las peticiones de compra y de venta (B/S ratio). Se muestra la cuota del volumen de las peticiones de cada tipo en el volumen total de las peticiones transmitidas, así como el valor absoluto del volumen de las peticiones abiertas.

\r\n

Por defecto, este indicador se muestra al fondo y no impide leer otros indicadores en el gráfico. Cuando utiliza este indicador para el trading, se recomienda referirse adicionalmente a los volúmenes reales.

\r\n

Este indicador va a trabajar sólo con los símbolos que tienen disponible el DOM. En primer lugar, va a ser interesante para los traders de FORTS y otos mercados de bolsa accesibles a través de la plataforma MetaTrader 5.

\r\n

Los parámetros del indicador permiten mostrar el diagrama de manera más cómoda:

\r\n

Maximal volume of request (0 - autosize) - el volumen máximo de la petición que corresponde a la longitud de la barra. Si se indica 0, la longitud se pone automáticamente de acuerdo con el volumen de la petición máxima en el DOM. Este parámetro permite fijar el zoom del diagrama (por defecto este valor es igual a 200).
Size of histogram bar - longitud de la barra del histograma (%). Porcentaje del ancho de la ventana que ocupará la petición con el volumen que es igual al volumen máximo del parámetro 1 (por defecto, este valor es 20).
Display the indicator on background - mostrar el indicador al fondo. Permite dibujar el indicador detrás del gráfico y otros indicadores (valor por defecto - true).
Show B/S ratio bar - muestra el diagrama B/S en el gráfico.
Bar height (% of window height) - alto del diagrama B/S (en por cientos del alto de la ventana).

\r\n

Actual Tick Footprint Volume Chart

\r\n

Otro nuevo indicador único Actual Tick Footprint (Volume Chart) ha sido desarrollado para utilizarse en los mercados de futuros y permite ver los volúmenes de las operaciones reales en el momento de su ejecución. El indicador Actual Tick Footprint (Volume Chart) representa un gráfico de tick absolutamente mejorado que se completa con la información sobre el volumen real de operaciones realizadas por un precio determinado. Aparte de eso, este indicador único para MetaTrader 5 permite reconocer con total seguridad el tipo de la operación: venta o compra.

\r\n

El indicador construye tres líneas en una ventana separada (como el gráfico de ticks estándar):

\r\n

Línea Bid.
Línea Ask.
Línea Last en la que se muestran los círculos con cifras que indican el volumen de la operación realizada por este precio. El tamaño del círculo corresponde al volumen de operaciones realizadas y su color representa el tipo de la operación. El color rojo significa que la operación ha sido realizada por el precio Bid (se interpreta como la venta), el color verde indica en el precio Ask (se interpreta como la compra).

\r\n

Estos indicadores son imprescindibles durante el scalping en los mercados de futuros porque permiten detectar muchos patrones y obtener la información que no está disponible para un trader habitual, por ejemplo:

\r\n

Operaciones con un volumen extremadamente elevado. A continuación, el precio de estas operaciones realizadas probablemente será del nivel de resistencia.
Operaciones de qué tipo se realizan en un cierto rango: compra o venta. Eso permite comprender en qué dirección se espera la salida de la acumulación.
Comportamiento de los traders durante el momentum y el paso del nivel, ¿si todos compran o venden cuando el precio se cambia bruscamente?
y muchas situaciones más.

\r\n

El indicador incluye un sistema de filtración incorporado y muestra sólo las operaciones nuevas que se realizan por el precio cambiado o con un volumen elevado. Las operaciones con el volumen de 1 lote se muestran pero no tienen textos en el gráfico permitiendo así centrarse en lo más importante.

\r\n

Yo recomiendo adjuntar el indicador Actual Tick Footprint (Volume Chart) al gráfico M1 o M5 y elegir el zoom óptimo. Eso permite tomar la decisión óptima tanto durante el scalping, como durante la búsqueda de la mejor entrada en el mercado a más largo plazo.

\r\n

Para comprender el comportamiento de los participantes del mercado e interpretar los volúmenes, recomiendo utilizar este indicador en combinación con otro producto mío- Actual Depth of Market Chart, que le mostrará el histograma de la Profundidad del Mercado.

\r\n

Los parámetros del indicador permiten ajustar la apariencia del gráfico:

\r\n

Ticks on chart – número de últimas operaciones mostradas.
Scale in pips – altura de la escala vertical en puntos. Hay que ajustar su valor tomando en cuenta la volatilidad actual.
Color volume buy – color de la marca de la operación de compra.
Color volume sell – color de la marca de la operación de operación de venta.
Color label – color del texto del volumen en la marca de la operación.

\r\n

Preste atención en algunas particularidades:

\r\n

Este indicador no va a trabajar en el Probador de Estrategias, sólo en el mercado real. En el vídeo puede ver como funciona.
Este indicador va a trabajar sólo en los símbolos para los que se transmiten los volúmenes reales de las operaciones del valor cotizado. En primer lugar, va a ser interesante para los traders de FORTS y otos mercados de bolsa accesibles a través de la plataforma MetaTrader 5.
Los datos se muestran sólo cuando el indicador está inicializado. El indicador no puede mostrar los datos que han pasado antes de su inicialización.

", "url": "https://www.mql5.com/es/market/product/2574", "small_icon": "https://c.mql5.com/31/13/actual-combo-depth-of-market-and-tick-volume-chart-logo-60x60-4302.png", "middle_icon": "https://c.mql5.com/31/445/actual-combo-depth-of-market-and-tick-volume-chart-logo-140x140-8862.png", "icon": "https://c.mql5.com/31/13/actual-combo-depth-of-market-and-tick-volume-chart-logo-200x200-9948.png", "rating": 3.5263157, "price": 40, "published": 1389265102, "popularity": 4.499676087876447, "category": "Indicator", "votes": 19 }, { "id": 2565, "title": "Moving Average Bars 5", "description": "

Moving Average Bars is a self-explanatory indicator with one input parameter: nPeriod.

\r\n

When the previous Price Close is above the previous indicator Bar, the probability to go Long is very high.

\r\n

When the previous Price Close is under the previous indicator Bar, the probability to go Short is very high.

", "url": "https://www.mql5.com/es/market/product/2565", "small_icon": "https://c.mql5.com/31/13/moving-average-bars-5-logo-60x60-6747.png", "middle_icon": "https://c.mql5.com/31/439/moving-average-bars-5-logo-140x140-2953.png", "icon": "https://c.mql5.com/31/13/moving-average-bars-5-logo-200x200-3494.png", "rating": 0, "price": 50, "published": 1389191081, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2540, "title": "TimeFilter simple", "description": "

The indicator is an inter-week hourly filter.

\r\n

When executing trading operations, the indicator allows considering time features of each trading session.

\r\n

Permissive and restrictive filter intervals are set in string form. The used format is [first day]-[last day]:[first hour]-[last hour]. See the screenshots for examples.

\r\nParameters:\r\n

Good Time for trade - intervals when trading is allowed.
Bad Time for trade - intervals when trading is forbidden.
\r\n
time filter shift (hours) - hourly shift.
percentage filling - indication value.
Show On/Off - enable/disable the filter visualization.

\r\n

Using in Expert Advisors: buffer 0 equal to 0 - trading is forbidden, otherwise - allowed.

", "url": "https://www.mql5.com/es/market/product/2540", "small_icon": "https://c.mql5.com/31/13/timefilter-simple-logo-60x60-2240.png", "middle_icon": "https://c.mql5.com/31/441/timefilter-simple-logo-140x140-4027.png", "icon": "https://c.mql5.com/31/13/timefilter-simple-logo-200x200-3699.png", "rating": 0, "price": 30, "published": 1389172697, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2507, "title": "LRS Lineal Regresion Slope", "description": "

If instead of giving the regression value indicator end of the regression line (LRMA), we give the value of its slope, we obtain LRS or Linear Regression Slope Indicator.

\r\n

Since the slope is positive when prices rise, zero when they are in range and negative when they are lowered, LRS provides us the data on the price trend.

\r\n

Calculation

\r\n

                      sum(XY, n) - avg(Y, n)*sum(X, n)\r\n  Y= a + mX;      m=  --------------------------------        a= avg(Y, n) - m*avg(X, n)\r\n                      sum(X2, n) - avg(X, n)*sum(X, n)

According to the above formulas, the moving average of \"Y\" values builds the LRMA indicator; the moving average of \"m\" values builds the LRS indicator.

\r\n

The usefulness of this indicator increases when it is used with the R-squared indicator that reports the strength of the trend, while LRS informs us of the positive or negative strength.

", "url": "https://www.mql5.com/es/market/product/2507", "small_icon": "https://c.mql5.com/31/13/lrs-lineal-regresion-slope-logo-60x60-2189.png", "middle_icon": "https://c.mql5.com/31/439/lrs-lineal-regresion-slope-logo-140x140-4821.png", "icon": "https://c.mql5.com/31/13/lrs-lineal-regresion-slope-logo-200x200-1939.png", "rating": 0, "price": 30, "published": 1389094812, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2506, "title": "R2 oscilator", "description": "

R2 (R-squared) represents the square of the correlation coefficient between current prices and deducted from the linear regression. It is the statistical measure of how well the regression line is adjusted to the actual data, and therefore it measures the strength of the prevailing trend without distinguishing between ascending and descending one.

\r\n

The R2 value varies between 0 and 1, therefore it is an oscillator of bands that can show signs of saturation (overbought / oversold). The more the value approaches zero, the weaker the trend and, conversely, the closer you approach to 1, the stronger the trend.

\r\n

For example, an R2 of 0.7 calculated over a period of 5 days means that 70% of the price movements in that interval are explained by the regression line and the remaining 30% is unexplained noise.

\r\n

Calculation

\r\n

R2(p,t)= [ Cov(p,t) / (stdDev(t) x stdDev(p)) ] Cov= covariance; stdDev= standard deviation
\r\n p= price; t= period

\r\n
\r\n

The confidence of the predictions of strength of R2 depends on the period of its calculation. Statistically their critical values for the 95% confidence are:

\r\n

       period   R2 value (95% confidence)\r\n         5        0.77 \r\n         10       0.40 \r\n         14       0.27 \r\n         20       0.20 \r\n         25       0.16 \r\n         30       0.13 \r\n         50       0.08 \r\n         60       0.06 \r\n         120      0.03

\r\n

The usefulness of this indicator increases when used with the linear regression slope indicator that reports the direction of the trend, while R2 informs us of the strength of the trend.

", "url": "https://www.mql5.com/es/market/product/2506", "small_icon": "https://c.mql5.com/31/13/r2-oscilator-logo-60x60-9599.png", "middle_icon": "https://c.mql5.com/31/445/r2-oscilator-logo-140x140-4838.png", "icon": "https://c.mql5.com/31/13/r2-oscilator-logo-200x200-9784.png", "rating": 0, "price": 30, "published": 1389012172, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2503, "title": "CCI normalized", "description": "

Commodity Channel Index Technical Indicator (CCI) measures the deviation of the commodity price from its average statistical price. High values of the index point out that the price is unusually high being compared with the average one, and low values show that the price is too low. In spite of its name, the Commodity Channel Index can be applied for any financial instrument, and not only for the wares.

\r\n

There are two basic techniques of using Commodity Channel Index:

\r\n

Finding the divergences.
\r\n The divergence appears when the price reaches a new maximum, and Commodity Channel Index cannot grow above the previous maximums. This classical divergence is normally followed by the price correction.
As an indicator of overbuying/overselling.
\r\n Commodity Channel Index usually varies in the range of ±100. Values above +100 inform about overbuying state (and about a probability of correcting fall), and the values below 100 inform about the overselling state (and about a probability of correcting rise).

\r\n

Calculation
\r\n

\r\n

D = Price - SMA (TP, N)
\r\n SMA (D, N) = SUM (D, N) / N Simple Moving Average
\r\n M = SMA (D, N) * 0,015
\r\n CCI = M / D

\r\n

CCI is not an indicator ranging between fixed values and this makes comparison between different markets or time periods more difficult.
\r\n

\r\n

To resolve this problem, we normalize values within a given interval.

\r\nCCInorm= (CCIreal-CCImin)*(relMax-relMin)/(CCImax-CCImin) + relMin

General Parameters

\r\n

Symbol: Set different graphic symbol to study, for example, correlation behavior.
CCI period: The number of bars to calculate CCI.
Normalization period: Time interval, over which we calculate the normalization values.
Period smoothing: Period to calculate signal line (EMA).
TimeFrame: Provides the vision of ATR in different frames to the graph.
Maximum level: Maximum level normalized CCI (100 by default).

\r\n
\r\n

Advantages

\r\n

Reports the level of volatility in a relative way: more than yesterday, less than a month ago, etc.
Facilitates the study of volatility compared between different pairs.
Reports the level of correlation between different pairs visually.

", "url": "https://www.mql5.com/es/market/product/2503", "small_icon": "https://c.mql5.com/31/13/cci-normalized-logo-60x60-6967.png", "middle_icon": "https://c.mql5.com/31/440/cci-normalized-logo-140x140-4259.png", "icon": "https://c.mql5.com/31/13/cci-normalized-logo-200x200-4370.png", "rating": 0, "price": 30, "published": 1389004058, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2366, "title": "Bears Bulls Histogram", "description": "

The Bears Bulls Histogram indicator is based on the standard Moving Average indicator.

You have MA input parameters:

maPeriod - Moving Average period;
maMODE - Moving Average mode (0 = MODE_SMA; 1 = MODE_EMA; 2 = MODE_SMMA; 3 = MODE_LWMA);
maPRICE - Applied price (0=PRICE_CLOSE; 1=PRICE_OPEN; 2=PRICE_HIGH; 3=PRICE_LOW; 4=PRICE_MEDIAN; 5=PRICE_TYPICAL; 6=PRICE_WEIGHTED).

Green Histogram is representing an Up-trend and Red Histogram is representing a Down-trend.

", "url": "https://www.mql5.com/es/market/product/2366", "small_icon": "https://c.mql5.com/31/13/bears-bulls-histogram-logo-60x60-1183.png", "middle_icon": "https://c.mql5.com/31/439/bears-bulls-histogram-logo-140x140-1177.png", "icon": "https://c.mql5.com/31/13/bears-bulls-histogram-logo-200x200-2591.png", "rating": 0, "price": 50, "published": 1387270217, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2359, "title": "Trinity Impulse Relative Vigor Index", "description": "

Trinity-Impulse indicator shows market entries and periods of flat.

\r\n

V-shaped impulse shows the time to enter the market in the opposite direction. Flat-topped impulse means it is time to enter the market in the same direction.

\r\n

The classical indicator Relative Vigor Index is added to the indicator separate window for double checking with Trinity Impulse.

", "url": "https://www.mql5.com/es/market/product/2359", "small_icon": "https://c.mql5.com/31/13/trinity-impulse-relative-vigor-index-logo-60x60-6230.png", "middle_icon": "https://c.mql5.com/31/440/trinity-impulse-relative-vigor-index-logo-140x140-1596.png", "icon": "https://c.mql5.com/31/13/trinity-impulse-relative-vigor-index-logo-200x200-5453.png", "rating": 0, "price": 50, "published": 1386937128, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2358, "title": "CCI Envelopes MT5", "description": "

2 yellow lines represent the Envelopes with automatic deviation.

The Envelopes indicator is a tool that attempts to identify the upper and lower bands of a trading range.

Aqua line represents classic Commodity Channel Index added to the Envelopes on the chart, not in a separate window.

The Commodity Channel Index (CCI) is a technical indicator that measures the difference between the current price and the historical average price.

", "url": "https://www.mql5.com/es/market/product/2358", "small_icon": "https://c.mql5.com/31/13/cci-envelopes-mt5-logo-60x60-7716.png", "middle_icon": "https://c.mql5.com/31/439/cci-envelopes-mt5-logo-140x140-3798.png", "icon": "https://c.mql5.com/31/13/cci-envelopes-mt5-logo-200x200-1732.png", "rating": 0, "price": 50, "published": 1386936301, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2347, "title": "Chaikin Money Flow", "description": "

This indicator incorporates the volume to inform the market\r\n trend. A warning system (chart, SMS and e-mail) is\r\n incorporated for warning when a certain level is exceeded.

\r\n

Developed by Marc Chaikin,\r\n Chaikin Money Flow (CMF) measures the amount of Money Flow Volume (MFV) over a\r\n specific period. Money Flow Volume forms the basis for the Accumulation\r\n Distribution Line. Instead of a cumulative total of Money Flow Volume, Chaikin\r\n Money Flow simply sums Money Flow Volume for a specific look-back period. The\r\n resulting indicator fluctuates above/below the zero line just like an\r\n oscillator.

\r\n

Calculation

\r\n

\r\n Money Flow Multiplier (MFM)= ( (CLOSE(i)-LOW(i))-(HIGH(i)-CLOSE(i))\r\n ) / (HIGH(i)-LOW(i))

MFV(i)= MFM(i) * VOLUME(i)

\r\n CMF(n)= sum(MFV, n) / sum(Vol, n)
\r\n

\r\n

Each period's Money Flow\r\n Volume depends on the Money Flow Multiplier. This multiplier is positive when\r\n the close is in the upper half of the period's high-low range and negative\r\n when the close is in the lower half. The multiplier equals 1 when the close equals\r\n the high and -1 when the close equals the low. In this way, the multiplier\r\n adjusts the amount of volume that ends up in Money Flow Volume. Volume in effect is reduced unless the Money Flow Multiplier is at its extremes (+1 or -1).

\r\n

Signals

\r\n

CMF provides three types of typical signals:

\r\n

Values above zero indicate accumulation line. Values below zero indicate distribution one (see indicator A/D).
The time that the indicator is in one of those positions.
The value reached above or below the zero line.

\r\n

Chaikin recommended n=21 and stated that ...

\r\n

Readings between 0 and 0.10 (-0.10) indicate\r\n uptrend (bearish) weak.
Readings > 0.25 (<-0.25) indicate uptrend\r\n (bearish) strong.

\r\n

Input Parameters

\r\n

\"Period calc\" numbers of bars to calculate.
\"EMA signal\" EMA smoothed signal line.
\"Alert level\" value to be set by the user to\r\n emit warning sound when is passed and send email or SMS.
\"Alert mode\": NoW = no warning (only alert in\r\n chart), e-mail, SMS, AllW= e-mail and SMS.
Volume type: VOLUME_TICK / VOLUME_REAL.

\r\n

Warning System

\r\n

The user defines a level, for example 0.1. The indicator alerts\r\n you with a warning message on the screen when this value is exceeded. The user\r\n can also choose an e-mail or SMS whenever MetaTrader 5 is set.

\r\n

Application

\r\n

Chaikin Money Flow can be used to define a general buying or\r\n selling bias simply with positive or negative values. The indicator oscillates\r\n above/below the zero line. Generally, buying pressure is stronger when the\r\n indicator is positive and selling pressure is strong when the indicator is\r\n negative.

\r\n

While this zero line cross seems simple enough, the reality is\r\nmuch choppier. Chaikin Money Flow sometimes only briefly crosses the zero line\r\nwith a move that turns the indicator barely positive or negative. There is no\r\nfollow through and this zero line cross ends up becoming a whipsaw (bad\r\nsignal). Chartists can filter these signals with buffers by setting the bullish\r\nthreshold a little above zero (+.05) and the bearish threshold a little below\r\nzero (-.05). These thresholds will not entirely eliminate bad signals, but can\r\nhelp reduce whipsaws and filter out weaker signals.

", "url": "https://www.mql5.com/es/market/product/2347", "small_icon": "https://c.mql5.com/31/96/chaikin-money-flow-logo-60x60-3598.png", "middle_icon": "https://c.mql5.com/31/445/chaikin-money-flow-logo-140x140-2890.png", "icon": "https://c.mql5.com/31/96/chaikin-money-flow-logo-200x200-2989.png", "rating": 0, "price": 30, "published": 1386855702, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2331, "title": "ACI Bollinger Bands", "description": "

Tired of adjusting the indicator settings losing precious time? Tired of the uncertainty regarding their efficiency? Afraid of the uncertainty in their profitability? Then the indicator ACI (automatically calibrateable indicator) is designed exactly for you. Launching it, you can easily solve these three issues just performing the simplest action: clicking a single Calibrate button. To achieve the highest efficiency, you should perform another additional action: move the power slider to the maximum.

\r\n

ACI will save you a lot of time that can be spent on more useful things, for example, vacation, but the effeciency will increase many times. In addition, thanks to the separate graphical interface, you can not only watch but also easily change the settings of the indicator on the fly, with the ability to select calibration areas visually on the chart.

\r\n

Useful information

\r\n

If you to get more info about a similar indicator before making a purchase, clicking on the link to try the simplest indicator of ACI series for free. You will also find a demonstration video there.

\r\n

Indicator for calibrating

\r\n

Standard built-in Moving Average is used as a calibrated one. The following properties are used as calibrated ones:

\r\n

Period for average line calculation.
Number of standard deviations (bonus property).
Shift of the indicator relative to the price chart.
Smoothing type:\r\n
- Simple averaging,
- Exponential averaging,
- Smoothed averaging,
- Linear-weighted averaging.
\r\n
The price used: \r\n
- Close price,
- Open price,
- The maximum price for the period,
- The minimum price for the period,
- Median price,
- Typical price,
- Average price.
\r\n

\r\n

Standard input/output signals are used to calculate the quality (profitability):

\r\n

If the price crosses below the lower level of the indicator, the signal is considered as a buy one. If the price crosses above the higher level of the indicator, the signal is considered as a sell one.

\r\n

ACI

\r\n

Automatic calibrator and the calibrated indicator can be controlled by ACI graphical interface which reduces the amount of actions you should perform to a minimum. To start the calibration process, click Calibrate button. When the calibration power reaches the specified mark, calibration stops, or else it can be stopped by another click.

\r\n

Besides calibration, ACI also quickly calculates and displays the quality (profitability) of the selected parameters of the calibrated indicator at a specified time interval of a chart. The calculation is made by the method specified in the settings (\"Criterion for calibration\" parameter). The time interval on the chart can be changed using the levels. To do this, move the cursor to the upper or lower part of the level, highlight it with a click and start changing.

\r\n

If necessary, you can increase or decrease the power (Power) calibrator moving the slider clockwise or counterclockwise, respectively. The dial's transparent area allows you to adjust from 0% to 20% of the total power, the green one - from 20% to 50% and the red one - from 50% to 100%. If necessary, you can work with multiple copies of this indicator on the same chart.

\r\n

Settings

\r\n

The indicator has multiple settings ranging from calibrated indicator parameters to ACI graphical interface ones.

\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n

Property name	Description
Bollinger Bands default settings
Default BB Period\r\n	Period for average line calculation, default.
Default BB Deviation	Number of standard deviations, default.
Default \r\n BB\r\n Shift	Shift of the indicator relative to the price chart, default.
Default \r\n BB\r\n Method	Smoothing type, default.
Default \r\n BB\r\n Price\r\n	The price used, default.
Power
Default Power	Default power to be achieved during calibration.
Maximum Power	Maximum possible power.
Criterion
Criterion for Calibration	Calibration criterion. Method of calculating the quality (profitability). \r\n If you select \"Total_Net_Profit\", then quality = \r\n total net profit (in pips) - the total net loss (in pips). \r\n If you select \"Total_Net_Profit_Total_Drawdown\", then quality = \r\n total net profit (in pips) - the total net loss (in pips) - total for all signals maximum drawdown (in pips). \r\n Only bar Close prices are used.
Selected interval of the chart
Start bar	The bar for specifying the time interval beginning.
Finish bar	The bar for specifying the time interval end.
Bollinger Bands regulator settings
Minimum \r\n BB\r\n Period	Period for average line calculation, minimum.
Minimum BB Deviation	Number of standard deviations, minimum.
Minimum \r\n BB\r\n Shift	Shift of the indicator relative to the price chart, minimum.
Minimum \r\n BB\r\n Method	Smoothing type, minimum.
Minimum \r\n BB\r\n Price	The price used, minimum.
Maximum \r\n BB\r\n Period	Period for average line calculation, maximum.
Maximum BB Deviation	Number of standard deviations, maximum.
Maximum \r\n BB\r\n Shift	Shift of the indicator relative to the price chart, \r\n maximum.
Maximum \r\n BB\r\n Method	Smoothing type, \r\n maximum.
Maximum \r\n BB\r\n Price	The price used, \r\n maximum.
UI panel settings
Panel size	Panel size (in pixels). 0 - automatic size calculation.
Panel Transparent	Transparent level of panel. 0 - fully visible, 100 - fully hidden.
Panel color	General panel color.
Font color of panel	Panel fonts color.
Quality color	Quality (profitability) color.

", "url": "https://www.mql5.com/es/market/product/2331", "small_icon": "https://c.mql5.com/31/12/aci-bollinger-bands-logo-60x60-7015.png", "middle_icon": "https://c.mql5.com/31/445/aci-bollinger-bands-logo-140x140-8313.png", "icon": "https://c.mql5.com/31/12/aci-bollinger-bands-logo-200x200-1289.png", "rating": 4, "price": 0, "published": 1386679088, "popularity": 0.5772065952633578, "category": "Indicator", "votes": 3 }, { "id": 2276, "title": "ACI Moving Average", "description": "

\r\n

Indicator for Calibrating

\r\n

Standard built-in Moving Average is used as a calibrated one. The calibrated properties are used:

\r\n

Averaging period for the calculation of the moving average.
Shift of the indicator relative to the price chart.
Smoothing type:\r\n
- Simple averaging.
- Exponential averaging.
- Smoothed averaging.
- Linear-weighted averaging.
\r\n
The price used:\r\n
- Close price.
- Open price.
- The maximum price for the period.
- The minimum price for the period.
- Median price.
- Typical price.
- Average price.
\r\n

\r\n

Standard input/output signals are used to calculate the quality (profitability):

\r\n

If the closing price of the previous bar is higher than or equal to the value of the indicator on the same bar, the signal is considered as a buy one. Otherwise the signal will be considered as a sell one.

\r\n

ACI

\r\n

Settings

\r\n

The indicator has multiple settings ranging from calibrated indicator parameters to ACI graphical interface ones.

Property name	Description
Moving Average default settings
Default MA Period	Averaging period for the calculation of the moving average, default.
Default MA Shift	Shift of the indicator relative to the price chart, default.
Default MA Method	Smoothing type, default.
Default MA Price	The price used, default.
Power
Default Power	Default power to be achieved during calibration.
Maximum Power	Maximum power.
Criterion
Criterion for Calibration	Calibration criterion. Method of calculating the quality (profitability). \r\n If you select \"Total_Net_Profit\", then quality = total net profit (in pips) - the total net loss (in pips). \r\n If you select \"Total_Net_Profit_Total_Drawdown\", then \r\n quality\r\n = total net profit (in pips) - the total net loss (in pips) - total for all signals maximum drawdown (in pips). \r\n Only bar Close prices are used.
Selected interval of the chart
Start bar	The bar for specifying the time interval beginning.
Finish bar	The bar for specifying the time interval end.
Moving Average regulator settings
Minimum MA Period	Averaging period for the calculation of the moving average, minimum.
Minimum MA Shift	Shift of the indicator relative to the price chart, minimum.
Minimum MA Method	Smoothing type, minimum.
Minimum MA Price	The price used, minimum.
Maximum MA Period	Averaging period for the calculation of the moving average, maximum.
Maximum MA Shift	Shift of the indicator relative to the price chart, \r\n maximum.
Maximum MA Method	Smoothing type, maximum.
Maximum MA Price	The price used, \r\n maximum.
UI panel settings
Panel size	Panel size (in pixels). 0 - automatic size calculation.
Panel Transparent	Transparent level of panel. 0 - fully visible, 100 - \r\n fully\r\n hidden.
Panel color	General panel color.
Font color of panel	Panel fonts color.
Quality color	Quality (profitability) color.

", "url": "https://www.mql5.com/es/market/product/2276", "small_icon": "https://c.mql5.com/31/12/aci-moving-average-logo-60x60-7307.png", "middle_icon": "https://c.mql5.com/31/446/aci-moving-average-logo-140x140-8982.png", "icon": "https://c.mql5.com/31/12/aci-moving-average-logo-200x200-3202.png", "rating": 4, "price": 0, "published": 1386601577, "popularity": 0.2859171991153063, "category": "Indicator", "votes": 2 }, { "id": 2284, "title": "Support and Resistance", "description": "

Support & Resistance indicator is a modification of the standard Bill Williams' Fractals indicator.

\r\n

The indicator works on any timeframes. It displays support and resistance levels on the chart and allows setting stop loss and take profit levels (you can check the exact value by putting the mouse cursor over the level).

\r\n

Blue dashed lines are support level.
Red dashed lines are resistance levels.

\r\n

If you want, you can change the style and color of these lines.

\r\n

If the price approaches a support level, the activity of seller decreases and the activity of buyers increases. If the price approaches a resistance level, the activity of buyers decreases and the activity of sellers increases.

\r\n

Note, that when the price breaks through a support level, it may become a resistance level; and when the price breaks through a resistance level, it may become a support level.

", "url": "https://www.mql5.com/es/market/product/2284", "small_icon": "https://c.mql5.com/31/12/support-and-resistance-logo-60x60-8285.png", "middle_icon": "https://c.mql5.com/31/446/support-and-resistance-logo-140x140-9457.png", "icon": "https://c.mql5.com/31/12/support-and-resistance-logo-200x200-1987.png", "rating": 0, "price": 30, "published": 1386241147, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2188, "title": "Advanced trend builder", "description": "

Advanced Trend Builder is a trend indicator using the original calculation algorithm.

\r\n

ATB can be used on any data and timeframe.

\r\n

My recommendation use for calculation numbers 4 - 16 - 64 - 256 and so on ..., but this is only recommendation.

\r\n

The middle of the trend wave is a special place where market behavior is different, when developed ATB was main idea to find the middle of \r\nthe wave trend.

\r\n

Input parameters:

\r\n\r\n\r\n

Bars will be used for calculation - number of bars used for a trend line calculation.

\r\n

", "url": "https://www.mql5.com/es/market/product/2188", "small_icon": "https://c.mql5.com/31/412/advanced-trend-builder-logo-60x60-6855.png", "middle_icon": "https://c.mql5.com/31/446/advanced-trend-builder-logo-140x140-3699.png", "icon": "https://c.mql5.com/31/412/advanced-trend-builder-logo-200x200-9584.png", "rating": 3, "price": 0, "published": 1385542745, "popularity": 0.47773039781991766, "category": "Indicator", "votes": 1 }, { "id": 2047, "title": "Pairs Trading Hedge Chart", "description": "

This indicator is intended for visual multicurrency analysis. It allows synchronous scrolling and analysis of a few charts simultaneously and can also be used for pairs trading. The indicator works both on Forex and on Russian FORTS market. The product has a very important property - if there are skipped bars at the symbols, the synchronism of charts on the time axis is fully preserved.

Each chart point is strictly synchronous with the others on the time axis at any time frame. This is especially true in the stock market, as well as for low-liquidity symbols.

Type of the price presentation is an alternative one. It is described in Custom Price Chart and has the same settings.

The Following Values are Displayed:

Weighted average price - as a point. The default colors are as follows: red point - the price is falling (compared with the previous one), green point - the price is rising, yellow point - the price is equal to the previous one, gray dot - the price corresponds to the bar skipped on this chart.
High price value - as a dashed line above the point.
Low price value - as a dashed line below the point.
\"Round\" price levels - as horizontal dashed lines.
Current Bid/Ask/Last prices - as horizontal lines. Display, color and line style are specified by a user.

Fig. 1 displays this indicator together with Custom Price Chart one applied to the main chart, as well as with Price Info Panel indicators applied to the main chart and to each of the additional ones. This example shows the convenience of the multicurrency analysis based on various trading strategies (for example, Elder's Triple Screen, seasonal trends, etc.), as well as the development of new strategies depending on the trader's preferences.

Fig. 2 shows similar example for Russian FORTS market.

Below is the offer for active users and all those who keeps reading to this line.

If you have any interesting ideas for improving this or any other product I offer, then you'll get a big discount for any of my products if the idea is realized.

Please write all your suggestions on the Comments tab, so we can have a documentary proof of the ideas and see who the first author is.", "url": "https://www.mql5.com/es/market/product/2047", "small_icon": "https://c.mql5.com/31/11/pairs-trading-hedge-chart-logo-60x60-3403.png", "middle_icon": "https://c.mql5.com/31/441/pairs-trading-hedge-chart-logo-140x140-5857.png", "icon": "https://c.mql5.com/31/11/pairs-trading-hedge-chart-logo-200x200-9558.png", "rating": 0, "price": 30, "published": 1385024343, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2142, "title": "Session Moving Average", "description": "

The Forex trading market operates 24 hours a day but the best trading times are when the major \r\ntrading sessions are in play.

\r\n

The Sessions Moving Average indicator helps\r\n identify Tokyo, London and New York, so you know when one \r\nsession starts, ends or even overlaps.

\r\n

This indicator also shows how session affects the price movement. Now, you can see the market trend by comparing the price with 3 Average lines or comparing 3 Average lines together.

", "url": "https://www.mql5.com/es/market/product/2142", "small_icon": "https://c.mql5.com/31/11/session-moving-average-logo-60x60-9693.png", "middle_icon": "https://c.mql5.com/31/440/session-moving-average-logo-140x140-5963.png", "icon": "https://c.mql5.com/31/11/session-moving-average-logo-200x200-8628.png", "rating": 0, "price": 30, "published": 1384868250, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2123, "title": "Moving Average Angle 13 types", "description": "

\"MA Angle 13 types\" is an indicator that informs of the inclination angle of the moving average curve that is displayed on the screen.

It allows\r\n selecting the MA method to use. You can also select the period, the price and the \r\nnumber of bars the angle is calculated for. In addition, \r\n\"factorVisual\" parameter adjusts the information about the \r\nMA curve angle displayed on this screen. The angle is calculated from your tangent\r\n (price change per minute).

\r\n

You can select up to 13 types of MA, 9 standard ones in MT5 (SMA, EMA, SMMA, LWMA, DEMA, TEMA, Frama, VIDYA, AMA) and 4 non-standard ones (LRMA, HMA, JMA, SAYS), from which code is copyright NIKOLAY KOSITSIN - Godzilla and can be found on the web (e.g., LRMA).

\r\n

General Parameters

\r\n

Method MA - select the type of the Moving Average to show in the current graph.
Period MA - the number of bars to calculate the Moving Average.
Period signal - period of smoothing signal.
Applied Price - select price type (close, high, low ...).
TimeFrame - provides the vision of MA in different frames to the graph.
No candles for calculation - tangent angle calculated as change in price per minute.
Visual factor - approaching the visual numerical information to graphic when the user zooms in the graph.

\r\n

Advantages of Use

\r\n

Trend strength evaluation for risk management.
Anticipating change in trend.

", "url": "https://www.mql5.com/es/market/product/2123", "small_icon": "https://c.mql5.com/31/11/moving-average-angle-13-types-logo-60x60-6834.png", "middle_icon": "https://c.mql5.com/31/442/moving-average-angle-13-types-logo-140x140-7251.png", "icon": "https://c.mql5.com/31/11/moving-average-angle-13-types-logo-200x200-4522.png", "rating": 0, "price": 30, "published": 1384785790, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 2046, "title": "Custom Price Chart", "description": "

The alternative representation of a price chart (a time series) on the screen.

Strictly speaking, this is not an indicator but an alternative way of visual interpretation of prices along with conventional ones - bars, candlesticks and lines.

Currently, I use only this representation of prices on charts in my analysis and trading activity.

In this visual mode, we can clearly see the weighted average price value (time interval's \"gravity center\") and up/down dispersion range. A point stands for (Open + High + Low + Close ) / 4, the upper dashed line is High, the lower one is Low.

We can clearly see price acceleration/deceleration, steady increase/decrease, various spikes reaching stop levels, chaotic movements, as well as range/flat areas. All this can also be seen when using candlesticks but I think that the offered representation is more comprehensible.

The following values are displayed:

Weighted average price - as a point.
High price value - as a dashed line above the point.
Low price value - as a dashed line below the point.
\"Round\" price levels - as dashed lines.

External parameters:

Points Size - point size (small/large).
Show Time Scale - show/hide the time scale on the current chart (Fig. 2).
Show Price Scale - show/hide price scale on the current chart (Fig. 2).
Show Round Levels - show/hide \"round\" price levels.
Round Levels Step in Points - distance between adjacent \"round\" levels in points - it is usually set as multiple of 500.
Up & Down Round Levels Number - number of displayed \"round\" price levels above and below the current price. If set to 4, the levels closest to price (4 below and 4 above) are displayed.
Chart Color Schema - indicator's color scheme. The following schemes are available: light/dark/black on white/white on black.

Below is the offer for active users and all those who keeps reading to this line.

If you have any interesting ideas for improving this or any other product I offer, then you'll get a big discount for any of my products if the idea is realized.

Please write all your suggestions on the Comments tab, so we can have a documentary proof of the ideas and see who the first author is.

", "url": "https://www.mql5.com/es/market/product/2046", "small_icon": "https://c.mql5.com/31/10/custom-price-chart-logo-60x60-3693.png", "middle_icon": "https://c.mql5.com/31/445/custom-price-chart-logo-140x140-4844.png", "icon": "https://c.mql5.com/31/10/custom-price-chart-logo-200x200-8806.png", "rating": 0, "price": 30, "published": 1384247984, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 610, "title": "Synthetic Reverse Bar", "description": "

Synthetic Reverse Bar is an evolution of Reverse Bar indicator.

\r\n

It is well-known that candlestick patterns work best at higher timeframes (H1, H4). However, candlesticks at such timeframes may form differently at different brokers due to dissimilarities in the terminal time on the single symbol, while the history of quotes on M1 and M5 remains the same! As a result, successful patterns are often not formed at higher timeframes!

\r\n

Synthetic Reverse Bar solves that problem! The indicator works on M5 or M15 but displays synthetic reversal bars than can be formed on higher timeframes.

\r\n

Besides, the indicator allows users to perform visual analysis of the reversal pattern's contents (the way the pattern was formed) and make decision on placing a pending order based on such analysis.
\r\n

\r\n

The indicator has two operation modes. Select Mode settings:
\r\n

\r\n

1. Set Time Frame - the size of the synthetic reversal bar is set by a higher timefeame.

\r\n

2. Custom Set Synthetic Bar - the size of the synthetic reversal bar is set manually (by the number of bars on the current timeframe).
\r\n

\r\n

Launch Settings

\r\n

Max Bars – number of bars calculated on the chart;
Select Mode – mode selection;
1. Set Time Frame – selecting higher timeframe. (The value should be greater than the current timeframe!);
2. Custom Set Synthetic Bar – set the size of the synthetic bar manually;
Show Only Strong Patterns – display only strong patterns (the bar is bullish at the bullish reversal, while it is bearish at the bearish reversal);
\r\n
Signal Alert – use an alert when a reversal pattern appears;
Show Arrow – display by arrows the level for placing a pending order (the level is set without considering spread);
Indent Arrow Pips – order level indent;
Set Smart Filter – setting the additional possible reversal filter;
Enabled Smart Filter – filter activity;
Calculate Period – filter's calculation period;
View Settings – reversal bar's display settings;
Up Bar Cond Color – color of the border of the bullish reversal bar body;
Up Bar Font Color – color of the filling of the bullish reversal bar body;
Dw Bar Cond Color – color of the border of the bearish reversal bar body;
Dw Bar Font Color – color of the filling of the bearish reversal bar body;
Show Prev Bar – show previous bar;
\r\n
Prev Bar Cond Color – color of the previous bar's border;
\r\n
Prev Bar Font Color – color of the previous bar's filling;
\r\n
Width Body Line – bars' border width;
Width Shade Line – bars' shades width;
\r\n
Check Synthetic Awesome Oscillator – check Awesome Oscillator indicator's histogram value according to strategy of B. Williams;
Set Alligator – filter settings for Alligator indicator;
Add Alligator On Chart – add Alligator indicator on the chart automatically;
Check Alligator – check Alligator filter;
Mode Alligator parameters – mode of Alligator indicator parameters calculation (automatic recalculation of 13, 8, 8, 5, 5, 3 parameters according to the synthetic bar's size or custom setting);
\r\n
Jaw Period (for Custom Set) – custom period setting for Jaw;
Jaw Shift (for Custom Set) – custom shift setting for Jaw;
\r\n
Teeth Period (for Custom Set) – custom period setting for Teeth;
Teeth Shift (for Custom Set) – custom shift setting for Teeth;
\r\n
Lips Period (for Custom Set) – custom period setting for Lips;
\r\n
Lips Shift (for Custom Set) – custom shift setting for Lips;
MA Method – method of averaging;
Price – price type;
Set BW MFI Filter – filter settings for BW MFI;
Check BW MFI – use the filter by synthesized BW MFI histogram;
Applied Volume – volume type used (for BW MFI indicator).

", "url": "https://www.mql5.com/es/market/product/610", "small_icon": "https://c.mql5.com/31/10/synthetic-reverse-bar-logo-60x60-5027.png", "middle_icon": "https://c.mql5.com/31/440/synthetic-reverse-bar-logo-140x140-4023.png", "icon": "https://c.mql5.com/31/10/synthetic-reverse-bar-logo-200x200-3350.png", "rating": 5, "price": 50, "published": 1384183946, "popularity": 0.38630029554761347, "category": "Indicator", "votes": 2 }, { "id": 2039, "title": "Normalized ATR three modes", "description": "

Is the market volatile today? More than yesterday? EURUSD is volatile? More than GBPUSD? We need an indicator that allows us to these responses and make comparisons between pairs or between different timeframes. This indicator facilitates this task.

\r\n

Reports the normalized ATR as three modes;
It has a line that smooths the main signal;
The normalization of values occurs within a defined interval by user (34 default bars);
The user can also define any symbol and timeframe to calculate and to make comparative studies.

\r\n

Calculation modes:

\r\n

ABS_max_min= (realATR-absMin)*(relMax-relMin)/(absMax-absMin) + relMin (between 0-100);
Z_score = (realATR - arithmeticMean) / standardDeviation;
MA_ref = realATR / MAvalue * 100 (SMA of normalization period);

\r\n

General parameters:

\r\n

Symbol: Set different graphic symbol to study, for example, correlation behavior;
ATR period: The number of bars to calculate ATR;
Normalization period: Time interval over which we calculate the normalization values;
Period smoothing: Period to calculate signal line (EMA);
TimeFrame: Provides the vision of ATR in different frames.

\r\n

Advantages:

\r\n

Reports the level of volatility a relative way: more than yesterday, less than a month ago, etc;
Facilitates the study of volatility compared between different pairs;
Reports the level of correlation between different pairs visually.

\r\n", "url": "https://www.mql5.com/es/market/product/2039", "small_icon": "https://c.mql5.com/31/10/normalized-atr-three-modes-logo-60x60-3389.png", "middle_icon": "https://c.mql5.com/31/445/normalized-atr-three-modes-logo-140x140-2347.png", "icon": "https://c.mql5.com/31/10/normalized-atr-three-modes-logo-200x200-9592.png", "rating": 0, "price": 30, "published": 1383829383, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1966, "title": "All MAs 13 types MULTIPURPOSE TOOL", "description": "

\"All MAs-13 jm\" is a tool that allows accessing from a single control box 13 different types of MAs: 9 standard MAs in MetaTrader 5 (SMA, EMA, SMMA, LWMA, DEMA, TEMA, Frama, VIDYA, AMA ) and 4 non-standard (LRMA, HMA, JMA, SAYS) copyrights to which belong to Nikolay Kositsin (Godzilla), they can be found on the web (e.g. LRMA).

General Parameters

\r\n

Period MA: the number of bars to calculate the moving average.
MA Method: select the type of moving average to show in the current graph.
Applied Price: select price type (close, high, low, etc.).
TimeFrame: provides the vision of MA in different frames to the graph.

\r\n

Advantages

\r\n

Manual trader: it has a \"multipurpose knife\", more versatile than the standard indicators, which facilitates analysis of trends from a single control box and different timeframes of the chart, without having to find at the \"navigator\" each type of indicator.
Automatic trader: Allows you to optimize the type of MA as another parameter of the EA by simply including \"Method MA\" as external parameter. A strategy can not work with EMA but be profitable with VIDYA or AMA, as well tells the author's experience. By giving value to parameter to take into account the following enumeration: {SMA=0, EMA=1, SMMA=2, LWMA=3, DEMA=4, TEMA=5, FRAMA=6, VIDYA=7, AMA=8, LRMA=9, HMA=10, JMA=11, AFIRMA=12};

", "url": "https://www.mql5.com/es/market/product/1966", "small_icon": "https://c.mql5.com/31/9/all-mas-13-types-multipurpose-tool-logo-60x60-6415.png", "middle_icon": "https://c.mql5.com/31/439/all-mas-13-types-multipurpose-tool-logo-140x140-8641.png", "icon": "https://c.mql5.com/31/9/all-mas-13-types-multipurpose-tool-logo-200x200-1890.png", "rating": 0, "price": 30, "published": 1383124183, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1964, "title": "Ichimoku Advanced Pro", "description": "

Ichimoku Kinko Hyo is a purpose-built trend trading charting system \r\n that has been successfully used in nearly every tradable market. It is \r\n unique in many ways, but its primary strength is its use of multiple \r\n data points to give the trader a deeper, more comprehensive view into \r\n price action. This deeper view, and the fact that Ichimoku is a very \r\n visual system, enables the trader to quickly discern and filter \"at a \r\n glance\" the low-probability trading setups from those of higher \r\n probability.

\r\n

This indicator is based on the standard MT5 Ichimoku Kinko Hyo indicator but I have \r\n designed it to track the other values (RSI, CCI, Momentum, TEMA, ...) instead in a sub window.

\r\n

You can use it as confirmation of other strategies, or if you are a \r\n dedicated Ichimoku user, you can use it as a fantastic adjunct to your Ichimoku \r\n charts.

\r\n

This is a professional version, you can use all Ichimoku types in Properties tab.

\r\n

Buyers who bought this version can request adding new types instead of RSI, CCI.

\r\n

Anatomía del Indicador

El indicador muestra una línea de color rodeada por una banda de precios. La línea de color es el precio medio de la seguridad, y la banda de precios representa los niveles de sobrecompra / sobreventa. Si el precio medio es azul, debe buscar operaciones largas cuando el mercado no está sobrecomprado, y si el precio medio es rojo, debe buscar operaciones cortas cuando el mercado no está sobrevendido.

¡Un cambio de tendencia en el indicador no es una señal para operar o cerrar las operaciones opuestas de inmediato! Las bandas se usan para cronometrar.

Información técnica

El indicador se evalúa en cada barra, no en cada tic
El indicador tiene solo un parámetro desplegable con cuatro valores posibles
Implementa alertas visuales, sonoras, de correo electrónico y push

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions

", "url": "https://www.mql5.com/es/market/product/1887", "small_icon": "https://c.mql5.com/31/9/pz-lopez-trend-mt5-logo-60x60-6217.png", "middle_icon": "https://c.mql5.com/31/445/pz-lopez-trend-mt5-logo-140x140-7803.png", "icon": "https://c.mql5.com/31/9/pz-lopez-trend-mt5-logo-200x200-1246.png", "rating": 0, "price": 99, "published": 1382523622, "popularity": 16.36500905463865, "category": "Indicator", "votes": 0 }, { "id": 1804, "title": "PZ Turtle Trading MT5", "description": "

The Turtle Trading Indicator implements the original Dennis Richards and Bill Eckhart trading system, commonly known as The Turtle Trader. This trend following system relies on breakouts of historical highs and lows to take and close trades: it is the complete opposite to the \"buy low and sell high\" approach. The main rule is \"Trade an N-day breakout and take profits when an M-day high or low is breached (N must me above M)\". [ Installation Guide | Update Guide | Troubleshooting | FAQ | All Products ]

The Entry Strategy

The Turtles learned two breakout variants or \"systems\". System One (S1) used a 20-day price breakout for entry. However, the entry was filtered by a rule that was designed to increase the odds of catching a big trend, which states that a trading signal should be ignored if the last signal was profitable.

But this filter rule had a built-in problem. What if the Turtles skipped the entry breakout and that skipped breakout was the beginning of a huge and profitable trend that roared up or down? Not good to be on the sidelines with a market taking off!

If the Turtles skipped a System One 20-day breakout and the market kept trending, they could and would get back in at the System Two (S2) 55-day breakout. This fail-safe System Two breakout was how the Turtles kept from missing big trends that were filtered out.

The entry strategy using System Two is as follows:

Buy a 55-day breakout if we are not in the market;
Short a 55-day breakout if we are not in the market.

The entry strategy using System One is as follows:

Buy a 20-day breakouts if last S1 signal was a loss;
Short a 20-day breakouts if last S1 signal was a loss.

The Turtles calculated the stop-loss for all trades using the Average True Range of the last 30 days, a value which they called N. Initial stop-loss was always ATR(30) * 2, or in their words, two volatility units. Additionally, the Turtles would pile profits back into winning trades to maximize their winnings, commonly known as pyramiding. They could pyramid a maximum of 4 trades separated from each other by 1/2 volatility unit.

The Exit Strategy

The Turtles learned to exit their trades using breakouts in the opposite direction, which allowed them to ride very long trends.

The exit strategy using System Two is as follows:

Exit long positions if/when the price touches a 20-day low
Close shorts positions if/when the price touches a 20-day high

The exit strategy using System One is as follows:

Close long positions if/when the price touches 10-day low
Close short positions if/when the price touches a 10-day high

Input Parameters

S1 Trade Period: Donchian breakout period to trade (system #1)
S1 Stop Period: Donchian breakout period to exit trades (system #1)
S2 Trade Period: Donchian breakout period to trade (system #2)
S2 Stop Period: Donchian breakout period to exit trades (system #2)
Drawing Settings: Customize colors and sizes for arrows.
Alerts: This parameter block controls the indicator alerts.

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1804", "small_icon": "https://c.mql5.com/31/8/pz-turtle-trading-mt5-logo-60x60-2993.png", "middle_icon": "https://c.mql5.com/31/446/pz-turtle-trading-mt5-logo-140x140-5104.png", "icon": "https://c.mql5.com/31/8/pz-turtle-trading-mt5-logo-200x200-2632.png", "rating": 4.6666665, "price": 0, "published": 1381929734, "popularity": 5.22840276747484, "category": "Indicator", "votes": 6 }, { "id": 1857, "title": "Pivot Prof", "description": "

Ulimate MTF Support & Resistance - 5 Star Best Seller

New Year Sale - save $20 (normal price $79)

Beginner or Professional our best selling multi-timeframe Pivot Prof will enhance your trading and bring you great trade opportunities with the Support and Resistance levels that professionals use.

Pivot trading is a simple effective method for entering and exiting the market at key levels and has been used by professionals for decades and works on all symbols: Forex, Crypto, Stocks, Indicies etc.

Pivot Prof brings premium levels to the trader where the market is most likely to react, which is the very thing a trader needs to enter or exit the market and to avoid large stoplosses and drawdown.

Feature rich with special algorithms to calculate and simultaneously display 120+ levels of information per symbol, from across 17 different timeframes.

Everything is displayed in a unique, tidy and easy to use format, and comes complete with terminal, email and mobile phone alerts. Plus everything is customizable... formulas, display, alerts etc.

Includes custom day start option for Forex which automatically synchronizes with the start of the FX week in Sydney.

No matter what your trading style, you can use Pivot Prof to identify those key levels for you

No other indicator does what Pivot Prof does, so read on and get ready to change your trading today...

Click here for Examples

Click here to download MANUAL

Click here for the MT4 version + all products

Advantages of Pivot Prof

Simple, effective trading method
Identifies key market support and resistance levels
Easy to use, visual trading levels presented on your chart (more than just pivots)
Multiple timeframes all in one place
Popup, Email and Mobile (Push Notification) alerts
Custom day start for Forex - syncs with start of FX week (auto setup)
Full customization: Colors, Styles, Levels, Display, Calculations, Alerts and Alert Zones
Unique algorithms to tune levels to market hours and not your broker time
Unique display methods to keep your chart clear of irrelevant levels
Levels for Daily, Weekly, Monthly, Quarterly, + 2 Intraday Custom Timeframes
5 formulas to choose from: Standard, Fibonacci, Camarilla, Woodies, DeMark
Set your own percentage levels with Fibonacci pivots.
You can filter with your preferred indicators/method
Full Manual
Works with UHD monitors
Compatible with EA development
Excellent product support
Free Scanner Offer

Buy with confidence, this is a well supported product with fantastic features.

Also you can see our fantastic Mega Dashboard product here: Mega Dashboard

#tags #pivot #points #fibonacci #woodie #regression #trend #signal #multi #timeframe #mtf #scalping #swing #day #trading #ranging #market #levels #support #resistance #scanner

", "url": "https://www.mql5.com/es/market/product/1857", "small_icon": "https://c.mql5.com/31/1429/pivot-prof-logo-60x60-5233.png", "middle_icon": "https://c.mql5.com/31/1429/pivot-prof-logo-140x140-8852.png", "icon": "https://c.mql5.com/31/1429/pivot-prof-logo-200x200-5553.png", "rating": 4.9142857, "price": 59, "published": 1381847182, "popularity": 0.8189326598452608, "category": "Indicator", "votes": 35 }, { "id": 1840, "title": "Automatic Trendlines", "description": "El indicador dibuja líneas de tendencia en el gráfico. Este indicador tiene seis entradas. El usuario puede especificar etiquetas alternativas para ambas líneas. Si se utilizan varias instancias del indicador, las etiquetas deben ser diferentes. El usuario puede establecer el ancho y el color de las líneas y la profundidad, lo que especifica qué picos significativos deben usarse. Por ejemplo, Depth = 10 establece líneas de tendencia utilizando los picos y valles actuales que tienen al menos 10 barras a la derecha y a la izquierda y que tienen máximos / mínimos menores / mayores que los máximos / mínimos del pico. El indicador también pinta picos y valles anteriores. El indicador también tiene una función de alerta que se puede usar para notificar al usuario cuando el precio está a una distancia predeterminada de la línea de soporte / resistencia. La distancia de alerta se establece en pips.", "url": "https://www.mql5.com/es/market/product/1840", "small_icon": "https://c.mql5.com/31/8/automatic-trendlines-logo-60x60-6143.png", "middle_icon": "https://c.mql5.com/31/446/automatic-trendlines-logo-140x140-3271.png", "icon": "https://c.mql5.com/31/8/automatic-trendlines-logo-200x200-9705.png", "rating": 4.6938777, "price": 0, "published": 1381759662, "popularity": 20.301569590822403, "category": "Indicator", "votes": 49 }, { "id": 1836, "title": "Heiken Ashi Smoothed New", "description": "

This indicator is the same as the popular Heiken Ashi Smoothed.

\r\n

The Heikin Ashi indicator for MetaTrader 5 already exists, but it has two disadvantages:

\r\n

It paints the candles not accurate.
It's not possible to change the candle width. See also Heikin Ashi in MQL5 Code Base.

\r\n

In this version there are no such disadvantages.

", "url": "https://www.mql5.com/es/market/product/1836", "small_icon": "https://c.mql5.com/31/8/heiken-ashi-smoothed-new-logo-60x60-7005.png", "middle_icon": "https://c.mql5.com/31/445/heiken-ashi-smoothed-new-logo-140x140-9442.png", "icon": "https://c.mql5.com/31/8/heiken-ashi-smoothed-new-logo-200x200-6633.png", "rating": 0, "price": 30, "published": 1381486411, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1756, "title": "SignalFinder MA", "description": "

SignalFinderMA - is a multicurrency indicator displaying trend direction for several currency pairs and time frames on a single chart. Trend calculation is based on Moving Average.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is defined at the last complete bar.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs.
TimeFrames - time periods (time frames).
MA Period - period of the moving average.
MA Shift - shift of the moving average.
MA Method - method of smoothing of the moving average.
MA Applied Price - price for calculating the moving average.

\r\n

Currency pairs and time frames are separated by comma in the list.

\r\n

If a currency pair or a time frame does not exist or is mistyped, it is marked in crimson in the table.

\r\n

Indicator Signals:

\r\n

Blue arrow up - there is a bullish trend on the last closed candlestick.
Red arrow down - there is a bearish trend on the last closed candlestick.
Gray dot - no trend.
Yellow dot - loading history.

", "url": "https://www.mql5.com/es/market/product/1756", "small_icon": "https://c.mql5.com/31/8/signalfinder-ma-logo-60x60-8266.png", "middle_icon": "https://c.mql5.com/31/438/signalfinder-ma-logo-140x140-3823.png", "icon": "https://c.mql5.com/31/8/signalfinder-ma-logo-200x200-3639.png", "rating": 0, "price": 30, "published": 1380557969, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1744, "title": "Best Wave", "description": "

Indicador de tendencia (flat) con canal de precio.

\r\n

Comercio

\r\n

Compra - el precio ha cruzado la línea central de abajo hacia arriba (la vela se ha cerrado por encima de la línea), el canal está orientado horizontalmente (línea amarilla) o hacia arriba (línea verde). Pasa a ausencia de pérdidas tras alcanzar el precio del límite opuesto del canal. El cierre de posición tiene lugar tras formarse las condiciones para la venta.
Venta - el precio ha cruzado la línea central de arriba hacia abajo (la vela se ha cerrado por debajo de la línea), el canal está orientado horizontalmente (línea amarilla) o hacia abajo (línea roja). Pasa a ausencia de pérdidas tras alcanzar el precio del límite opuesto del canal. El cierre de posición tiene lugar tras formarse las condiciones para la compra.

\r\n

Parámetros de entrada

\r\n

Period - periodo de cálculo, por defecto 24;
Display channel - representación del canal, por defecto true.

\r\n

Para obtener información más completa sobre el estado del mercado, utilice los indicadores: Trend check y Angle Regression Line with Divergence

", "url": "https://www.mql5.com/es/market/product/1744", "small_icon": "https://c.mql5.com/31/8/best-wave-logo-60x60-7242.png", "middle_icon": "https://c.mql5.com/31/446/best-wave-logo-140x140-7487.png", "icon": "https://c.mql5.com/31/8/best-wave-logo-200x200-7071.png", "rating": 3.5, "price": 0, "published": 1380283104, "popularity": 0.6137887841817411, "category": "Indicator", "votes": 4 }, { "id": 1652, "title": "VWAP Universal", "description": "

VWAP es el precio promedio ponderado del volumen. Se calcula como suma de productos de volumen y precio dividido por el volumen total.

\r\n

Esta versión del indicador es universal ya que tiene tres modos de funcionamiento:

\r\n

Moving - en este modo el indicador es una media móvil. Pero a diferencia de la ordinaria SMA tiene intervalos más pequeños durante los movimientos de grandes! Pueden utilizarse bandas de desviación cuadrada de la misma manera que las Bandas de Bollinger.
Período - en este modo los cálculos se llevan a cabo desde el inicio hasta el final del período de acumulación (en cada barra, el valor se calcula para todo el período desde el inicio, así considera todos los valores desde el inicio del período). Las bandas de la desviación cuadrada producen niveles de soporte y resistencia de alta calidad.
Timer - en este modo los cálculos son similares a modo de «Período». La diferencia es el comienzo y el final del período que puede ser ajustado manualmente. El plazo máximo en este modo no debe exceder 24 horas.

\r\n

Settings:

\r\n

Max Bars - número de barras calculado en la tabla (0 - toda la historia disponible).
Use Mode - selección de modo. Hay 3 modalidades: Moving, Period, Timer.
Applied Precio - tipo de precio.
Applied Volume - tipo de volumen (si está disponible, en tick o real).
Set Moving Mode - onfiguración para el modo \"Moving\".
Moving Period - periodo de cálculo para el modo \"Moving\".
Set Period Mode - ajustes para el modo \"Period\".
Período Disponible - valores de los períodos estándar: hora, día, semana, Asia, Europa, NYSE, CME o Personalizado.
Custom Period - medida período (en minutos).
Set Timer Mode - ajustes para el modo \"Timer\".
Start Timer - inicio del período de tiempo.
Stop Timer - final del período de tiempo.
Set Deviation - configuración de visualización de las desviaciones.
Show Deviation 1 - Muestra la primera desviación cuadrada.
Show Deviation 2 - Muestra la segunda desviación cuadrada..
Show Deviation 3 - muestra la tercera desviación cuadrada.

\r\n

Este indicador sólo puede funcionar con volúmenes reales si son proporcionados por su broker. Por defecto, el volumen de la señal se selecciona en la configuración.

", "url": "https://www.mql5.com/es/market/product/1652", "small_icon": "https://c.mql5.com/31/8/vwap-universal-logo-60x60-3759.png", "middle_icon": "https://c.mql5.com/31/445/vwap-universal-logo-140x140-4179.png", "icon": "https://c.mql5.com/31/8/vwap-universal-logo-200x200-7576.png", "rating": 0, "price": 57, "published": 1380197955, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1727, "title": "Ultimate Price Action Compine MTF", "description": "

We try to detect long/medium/short-term trends and combine all of them with some price action patterns to find a good entry point.

\r\n

The Indicator benefits are:

\r\n

Can detect long/medium/short-term trends.
Can detect resistances/supports level (like pivot levels).
Shows entry point/time using colored arrows
Multitimeframe mode is available.

", "url": "https://www.mql5.com/es/market/product/1727", "small_icon": "https://c.mql5.com/31/8/ultimate-price-action-upa-logo-60x60-7649.png", "middle_icon": "https://c.mql5.com/31/445/ultimate-price-action-compine-mtf-logo-140x140-2603.png", "icon": "https://c.mql5.com/31/8/ultimate-price-action-upa-logo-200x200-5668.png", "rating": 0, "price": 49, "published": 1380188784, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1708, "title": "Trend check", "description": "

This indicator gives full information about the market state: strength and direction of a trend, volatility and price movement channel. It has two graphical components:

\r\n

Histogram: the size and the color of a bar show the strength and direction of a trend. Positive values show an ascending trend and negative values - a descending trend. Green bar is for up motion, red one - for down motion, and the yellow one means no trend. Signal line is the value of the histogram (you can enable divergence search).
Trend channel: upper border, lower border and the center of the channel (middle line). Color of the middle line shows the slope of the channel, and the channel width shows the volatility.

\r\n

Trading

\r\n

Buy: signal line have crossed the lower border of the channel, the histogram shows the beginning of upward motion. The line is either yellow (channel is horizontal) or green (the channel is directed upwards). It is recommended to move the position to breakeven when reaching the middle of the channel. Close positions when conditions for selling are formed.
Sell: signal line have crossed the upper border of the channel, the histogram shows the beginning of downward motion. The line is either yellow (channel is horizontal) or red (the channel is directed downwards). It is recommended to move the position to breakeven when reaching the middle of the channel. Close positions when conditions for buying are formed.

\r\n

You can also use divergence for entering deals. If a divergence signal is received after the signal line crossed the channel border, you can enter in the direction of the opposite border of the channel without waiting for confirmation from the histogram. It is not recommended to enter a trade at low volatility of the market (when the channel is narrow). It is not recommended to sell when the channel is directed upwards (the middle line is green). It is not recommended to buy when the channel is directed downwards (the middle line is red).

\r\n

The histogram represents a graph of changes of the regression line slope. The channel is the standard deviation from the average slope of the regression line.

\r\n

Input Parameters:

\r\n

Period histogram - period for calculation of the histogram, 24 on default;
Treshold histogram - threshold value for displaying the histogram when there is no trend, 6.0 on default (range: from -6.0 to 6.0);
Period volatility band - period for calculation of the volatility channel, 24 on default;
Treshold volatility band - threshold value for displaying the horizontal orientation of the trend channel, 3.0 on default (range: from -3.0 to 3.0);
Display cross bands volatility alert - notification when the signal line crosses the channel borders, true on default;
Display divergence arrow - displaying divergence graphically (arrows), false on default;
Display divergence alert - notification about divergence, false on default.

\r\n

Currency pair - any. Timeframe - any.

", "url": "https://www.mql5.com/es/market/product/1708", "small_icon": "https://c.mql5.com/31/8/trend-check-logo-60x60-1344.png", "middle_icon": "https://c.mql5.com/31/445/trend-check-logo-140x140-5361.png", "icon": "https://c.mql5.com/31/8/trend-check-logo-200x200-2840.png", "rating": 0, "price": 30, "published": 1380041280, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1675, "title": "Divergence CCI or any custom", "description": "

Mostrando la divergencia de cualquier indicador personalizado. Solo tienes que especificar el nombre de un indicador; en forma predeterminada utiliza CCI.

\r\n

Además se puede establecer suavizado para el indicador seleccionado, así como los niveles. Si uno de estos niveles es cruzado, usted recibirá una notificación. El indicador personalizado debe ser compilado (un archivo con extensión EX5) y se encuentra en el directorio de MQL5/indicadores del terminal de cliente o en uno de sus subdirectorios. Usa barra cero del indicador seleccionado con parámetros por defecto.

\r\n

Parámetros de entrada

\r\n

Nombre del indicador : nombre del indicador, la divergencia se calculará para el CCI por defecto;
Periodo del CCI - período de promediación de CCI, 7 por defecto;
Precio aplicado - precio usado, precio de cierre de defecto;
Método de Smoothing - método de suavizado, Simple en defecto;
Smooth - período de suavizado, 8 en defecto;
Nivel 1 - nivel del indicador, -100 por defecto;
Nivel 2 - nivel del indicador, -100 por defecto;
Barra calculada - número de barras para mostrar la divergencia, 300 por defecto;
Filtro de volumen - filtro de volumen, false de forma predeterminada. Si está habilitado, las señales de divergencia no aparecerán en caso de que el volumen sea menor que el volumen promedio para las 100 barras anteriores. Están disponibles tres modos: False, True, Auto. En modo Auto, el filtro es automáticamente habilitado en timeframes M30 y menor; y de desabilita en timeframes mayorres de M30;
Visualización deAlerta de divergencia - permite notificaciones sobre la divergencia, true por defecto;
Visualización de alerta de cross level - permite notificaciones acerca del cruce los niveles específicos del indicador, true por defecto;
Trazado de líneas del indicador de tendencia - permite mostrar las líneas de tendencia del indicador durante la divergencia, true por defecto;
Trazado de líneas de tendencia del precio - permite mostrar las líneas de tendencia en el gráfico de precios durante la divergencia, true por defecto;
Color de la linea Toro divergencia - selecciona un color para la línea de tendencia muestrada durante la divergencia alcista, verde por defecto;
Color de la linea Oso divergente - seleccione un color para la línea de tendencia muestra durante la divergencia bajista, rojo por defecto.

", "url": "https://www.mql5.com/es/market/product/1675", "small_icon": "https://c.mql5.com/31/8/divergence-cci-or-any-custom-logo-60x60-6808.png", "middle_icon": "https://c.mql5.com/31/438/divergence-cci-or-any-custom-logo-140x140-4840.png", "icon": "https://c.mql5.com/31/8/divergence-cci-or-any-custom-logo-200x200-9266.png", "rating": 0, "price": 30, "published": 1379508564, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1628, "title": "Bullish Bearish Volume", "description": "

Bullish Bearish Volume is an indicator that divides the volume into the bearish and the bullish part according to VSA:

\r\n

Bullish volume is a volume growing during upward motion and a volume falling during downward motion.

\r\n

Bearish volume is a volume growing during downward motion and a volume falling during upward motion.

\r\n

For a higher obviousness it uses smoothing using MA of a small period.

\r\n

Settings:

\r\n

MaxBars – number of bars calculated on the chart;
Method – smoothing mode (Simple is most preferable);
MA period – period of smoothing;
Applied Volume – volume type.

", "url": "https://www.mql5.com/es/market/product/1628", "small_icon": "https://c.mql5.com/31/8/bullish-bearish-volume-logo-60x60-2105.png", "middle_icon": "https://c.mql5.com/31/439/bullish-bearish-volume-logo-140x140-7318.png", "icon": "https://c.mql5.com/31/8/bullish-bearish-volume-logo-200x200-4937.png", "rating": 0, "price": 40, "published": 1379064370, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1638, "title": "PZ Swing Trading MT5", "description": "

Swing Trading es el primer indicador diseñado para detectar oscilaciones en la dirección de la tendencia y posibles oscilaciones de reversión. Utiliza el enfoque de intercambio de línea de base, ampliamente descrito en la literatura comercial. El indicador estudia varios vectores de precios y tiempos para rastrear la dirección de la tendencia agregada y detecta situaciones en las que el mercado está sobrevendido o sobrecomprado y listo para corregir.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Beneficio por cambios en el mercado sin ser aturdido
El indicador muestra la dirección de la tendencia en todo momento.
Una banda de precios coloreada representa la línea de base de oportunidad
Los guiones de colores representan posibles cambios de inversión.
El indicador analiza su propia calidad y rendimiento.
Implementa un tablero de múltiples marcos de tiempo
Tendencias personalizables y períodos de swing
Implementa alertas por correo electrónico / sonido / push
El indicador no se repinta ni se pinta

¿Qué es el Swing Trading?

Swing Trading es un estilo de negociación que intenta capturar ganancias en un valor dentro de un día a una semana, aunque algunas operaciones pueden mantenerse vivas por más tiempo. Los operadores de swing utilizan el análisis técnico para comprar debilidad y vender fuerza, y tienen la paciencia para esperar a que estas oportunidades sucedan, porque tiene más sentido comprar un valor después de que haya ocurrido una ola de ventas en lugar de quedar atrapado en una venta masiva.

Parámetros de entrada

Periodo de tendencia: este parámetro controla la sensibilidad a los cambios de tendencia. Un gran período de tendencia conducirá a capturar tendencias más largas. Un período de tendencia pequeño conducirá a la captura de tendencias más cortas, pero a un reconocimiento más rápido de los cambios de tendencia.
Período de referencia: este parámetro controla la sensibilidad de la referencia. El período para la línea de base siempre debe estar por debajo del período de tendencia. Increméntelo para comerciar usando una banda de oportunidad más grande y disminuya para hacerlo más pequeño.
Mostrar señales de oscilación: habilite este parámetro para mostrar flechas cuando el precio retroceda a la línea de base y salga de ella.
Mostrar correcciones: habilite este parámetro para mostrar guiones de colores cuando la tendencia comience a corregirse.
Mostrar el panel de control: active este parámetro para ver el panel de marco de tiempo múltiple en el gráfico.
Mostrar estadísticas: habilite este parámetro para mostrar el panel de estadísticas en el gráfico.
Configuración de dibujo: elija sus propios colores y tamaños para las flechas y los guiones inversos.
Alertas: habilite las alertas de pantalla / correo electrónico / push / sonido para patrones.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1638", "small_icon": "https://c.mql5.com/31/8/pz-swing-trading-mt5-logo-60x60-8813.png", "middle_icon": "https://c.mql5.com/31/446/pz-swing-trading-mt5-logo-140x140-4289.png", "icon": "https://c.mql5.com/31/8/pz-swing-trading-mt5-logo-200x200-9669.png", "rating": 5, "price": 125, "published": 1378829158, "popularity": 41.048946045792185, "category": "Indicator", "votes": 5 }, { "id": 1619, "title": "Volume Spread Analysis", "description": "

The indicator produces signals according to the methodology VSA (Volume Spread Analysis) - the analysis of trade volume together with the size and form of candlesticks. The signals are displayed at closing of bars on the main chart in the form of arrows. The arrows are not redrawn.

\r\n

Input Parameters:

\r\n

DisplayAlert - enable alerts, true on default;
Pointer - arrow type (three types), 2 on default;
Factor_distance - distance rate for arrows, 0.7 on default.

\r\n

Recommended timeframe - М15. Currency pair - any. The screenshots demonstrate a real deal on EURUSD М15 (from entry to closing the profit) and the M1 view.

", "url": "https://www.mql5.com/es/market/product/1619", "small_icon": "https://c.mql5.com/31/7/vsa-plus-logo-60x60-1542.png", "middle_icon": "https://c.mql5.com/31/438/volume-spread-analysis-logo-140x140-1715.png", "icon": "https://c.mql5.com/31/7/vsa-plus-logo-200x200-7034.png", "rating": 0, "price": 0, "published": 1378308959, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1549, "title": "CCFpExt", "description": "

CCFpExt is an extended version of the classic cluster indicator - CCFp.

\r\n

Main Features

\r\n

Arbitrary groups of tickers or currencies are supported: can be Forex, CFDs, futures, spot, indices;
Time alignment of bars for different symbols with proper handling of possibly missing bars, including cases when tickers have different trading schedule;
Using up to 30 instruments for market calculation (only first 8 are displayed).

\r\n

Parameters

\r\n

Instruments - comma separated list of instruments with a common currency; for Forex symbols the common currency is either a quote currency or a base currency, which is detected in all given symbols; for any other ticker it's taken from its profit currency property; if the autodetection failed, DefaultBase parameter is used (here, 'base' means a common currency between all tickers, not a base currency of a Forex symbol); the default set of instruments includes all Forex majors EURUSD,GBPUSD,USDCHF,USDJPY,AUDUSD,USDCAD,NZDUSD; please note, that NZDUSD is missing at MetaQuotes-Demo server for some reason, so don't forget to edit as appropriate;
MA_Method - moving average method, the default is linear weighted;
Price - moving average applied price type, the default is typical price;
Fast - fast moving average period, the default is 1;
Slow - slow moving average period, the default is 2;
All_Bars - number of bars to calculate on, the default 0 means all available bars;
BarByBar - false means re-calculating 0-th bar on every tick, true (default) means calculating bar only once (on 1-st tick and when closed);
DefaultBase - default common currency to use; it's used only if the base can not be detected automatically.

\r\n

Description

\r\n

While filling in Instruments, please, make sure you enter existing symbols. If Instruments parameter contains a symbol missing in Market Watch, the indicator tries to add it automatically for you. If the symbol is misspelled or unavailable on your server, an error occurs - you'll see the message \"Errors! Check the log\" on the chart. All details about errors and warning are logged in the Experts log.

\r\n

When number of Instruments is greater than 8, all of them participate in calculations and affect chart lines, but only first 8 are displayed. Though it's feasible to have more than 8 lines, it would produce difficulties with perception. Moreover, each next instrument added to the cluster affects the whole picture less.

\r\n

Please, be patient. The indicator calculates a bunch of moving averages for every symbol, for different time frames. When it's placed on a chart first time, the process may take a while, usually this means some data has being still downloading and calculating. All necessary refreshes take place automatically. You should interfere only if you see the above mentioned error message in the chart.

\r\n

CCFpExt allows you analyzing many interesting clusters, for example, Russian ruble ring (USDRUR, GBPRUR, EURRUR), oil industry (#LKOH, #ROSN, #SGNS, #SIBN), foods (wheat, corn, soy), indices, etc. You may find some examples in screenshots.

", "url": "https://www.mql5.com/es/market/product/1549", "small_icon": "https://c.mql5.com/31/7/ccfpext-logo-60x60-9787.png", "middle_icon": "https://c.mql5.com/31/441/ccfpext-logo-140x140-7575.png", "icon": "https://c.mql5.com/31/7/ccfpext-logo-200x200-5006.png", "rating": 0, "price": 30, "published": 1377697000, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1423, "title": "PZ Trend Trading MT5", "description": "

Trend Trading es un indicador diseñado para sacar el máximo provecho posible de las tendencias que tienen lugar en el mercado, mediante el cronometraje de retrocesos y rupturas. Encuentra oportunidades comerciales al analizar qué está haciendo el precio durante las tendencias establecidas.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Opere en los mercados financieros con confianza y eficiencia
Aproveche las tendencias establecidas sin ser aturdido
Reconocer retrocesos rentables, rupturas y reversiones tempranas
El indicador analiza su propia calidad y rendimiento.
Implementa un tablero de múltiples marcos de tiempo
El indicador no se repinta
Implementa alertas por correo electrónico / sonido / visuales

Las tendencias establecidas ofrecen docenas de oportunidades comerciales, pero la mayoría de los indicadores de tendencias las descuidan por completo. Interpretar el indicador es bastante fácil:

(1) es un cambio de tendencia
(2) es un retroceso en la dirección de la tendencia
(3) es una ruptura en la dirección de la tendencia
Un guión rojo es una corrección durante una tendencia bajista.
Un guión azul es una corrección durante una tendencia alcista
Las barras azules son una sub-tendencia alcista
Las barras rojas son una subtendencia bajista

Parámetros de entrada

Período indicador: este parámetro controla la sensibilidad a los cambios de tendencia. Un gran período conducirá a la captura de tendencias más largas. Un período pequeño conducirá a la captura de tendencias más cortas, pero a un reconocimiento más rápido de los cambios de tendencia.
Mostrar subtendencia: habilite este parámetro para ver la subtendencia reflejada en el color de las barras de precios.
Mostrar retrocesos: active este parámetro para ver retrocesos, que se muestran como (2) objetos en el gráfico.
Desglose de pantalla: habilite este parámetro para ver los desgloses en la dirección de la tendencia, que se muestran como (3) objetos.
Mostrar correcciones: habilite este parámetro para ver las correcciones de tendencia, que se muestran como guiones de colores.
Max. Barras de historial: este parámetro controla cuántas barras pasadas se examinan al cargar el indicador.
Mostrar el panel de control: habilite este parámetro para ver el panel de marco de tiempo múltiple en el gráfico.
Mostrar estadísticas: habilite este parámetro para mostrar el panel de estadísticas en el gráfico.
Configuración de dibujo: elija el color y el ancho de las líneas de corrección que se muestran en el gráfico.
Alertas: habilite las alertas de pantalla / correo electrónico / push / sonido para todas las configuraciones comerciales habilitadas anteriormente.

Soporte y preguntas

Utilice el servicio de asistencia para preguntas o asistencia oportuna. Escriba un correo electrónico a: help@pointzero-trading.com

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1423", "small_icon": "https://c.mql5.com/31/7/pz-trend-trading-mt5-logo-60x60-1716.png", "middle_icon": "https://c.mql5.com/31/445/pz-trend-trading-mt5-logo-140x140-6494.png", "icon": "https://c.mql5.com/31/7/pz-trend-trading-mt5-logo-200x200-2694.png", "rating": 3.8, "price": 125, "published": 1377615643, "popularity": 107.73897949396566, "category": "Indicator", "votes": 5 }, { "id": 1397, "title": "PZ Support Resistance MT5", "description": "

¿Cansado de trazar líneas de soporte y resistencia? La resistencia de soporte es un indicador de marco de tiempo múltiple que detecta y traza automáticamente los soportes y las líneas de resistencia en el gráfico con un giro muy interesante: a medida que los niveles de precios se prueban con el tiempo y aumenta su importancia, las líneas se vuelven más gruesas y oscuras.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Mejora tu análisis técnico de la noche a la mañana
Detecta niveles de precios importantes sin navegar por los gráficos
Reconozca la fortaleza relativa de todos los niveles de precios de un vistazo
Ahorre hasta media hora de líneas de trazado para cada operación
El indicador muestra la antigüedad de todos los niveles de precios.
El indicador no se repinta

Los niveles de precios pasados y presentes se colapsan por proximidad y se ajustan a la acción actual del mercado. Las líneas se dibujan donde está la acción y no necesariamente en los picos.

Los niveles de precios se vuelven más oscuros y anchos a medida que se rechazan con el tiempo
Los niveles de precios sin importancia se borran regularmente para evitar ruidos
Selección de marco de tiempo personalizable y factor de colapso
Implementa alertas por correo electrónico / sonido / push para desgloses

Parámetros de entrada

Configuración del indicador: el indicador leerá el precio del período de tiempo actual, pero opcionalmente puede seleccionar otro. Por ejemplo, puede mostrar líneas de soporte y resistencia D1 en gráficos H4. También puede elegir qué cantidad de niveles de precios mostrar en el gráfico, utilizando el parámetro de densidad de nivel de precios .
Configuración de color: ingrese los colores deseados para las líneas de soporte y resistencia según la importancia.
Configuración de etiquetas: opcionalmente, las etiquetas que muestran la antigüedad de cada línea de soporte y resistencia se pueden mostrar en el indicador. Esto está deshabilitado por defecto. Puede elegir la fuente y el tamaño de la etiqueta.
Alertas: habilite las alertas de pantalla / correo electrónico / push / sonido para los brotes.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1397", "small_icon": "https://c.mql5.com/31/7/pz-support-resistance-mt5-logo-60x60-2179.png", "middle_icon": "https://c.mql5.com/31/446/pz-support-resistance-mt5-logo-140x140-1404.png", "icon": "https://c.mql5.com/31/7/pz-support-resistance-mt5-logo-200x200-5807.png", "rating": 3.7142856, "price": 99, "published": 1377604671, "popularity": 4.092062624271913, "category": "Indicator", "votes": 7 }, { "id": 1502, "title": "PZ Harmonacci Patterns MT5", "description": "

Este es posiblemente el indicador de reconocimiento automático de formación de precios más completo que puede encontrar para la plataforma MetaTrader. Detecta 19 patrones diferentes, toma las proyecciones de Fibonacci tan en serio como usted, muestra la zona de reversión potencial (PRZ) y encuentra niveles adecuados de stop-loss y take-profit.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Detecta 19 formaciones de precios armónicos diferentes
Traza proyecciones de Fibonacci primarias, derivadas y complementarias (PRZ)
Evalúa la acción del precio pasado y muestra cada patrón pasado
El indicador analiza su propia calidad y rendimiento.
Muestra niveles adecuados de stop-loss y take-profit.
Utiliza desgloses para indicar intercambios adecuados
Implementa alertas por correo electrónico / sonido / visuales
Traza la proyección ABCD

Inspirado en el libro de Scott M. Carney, este indicador ha sido diseñado para satisfacer las necesidades de los comerciantes más puristas y exigentes. Sin embargo, implementa un giro para facilitar el comercio: espera una ruptura de Donchian en la dirección correcta antes de señalar el comercio, lo que hace que sus señales sean muy confiables.

Importante: Algunos nombres de patrones se han renombrado como alternativas que se explican por sí mismas para cumplir con una queja de marca registrada del Sr. Scott M. Carney.

Formaciones de precios armónicos compatibles

Nombre	Min XB	Max XB	Min AC	AC máx.	DB mínima	Max BD	Min XD	Max XD
Zorro Volador	0,382	0.5 0.5	0,382	0,886	1.618	2.618	0,886	0,886
Gartley	0.618	0.618	0,382	0,886	1.272	1.618	0,786	0,786
Langosta	0,382	0.618	0,382	0,886	2,24	3.618	1.618	1.618
Libélula	0,718	0,718	0,382	0,886	1.618	2.618	1.272	1.618
Cifrar	0,382	0.618	1.13	1.414	1.272	2,0	0,786	0,786
Barracuda	-	-	1.13	1.618	1.618	2,24	0,886	1.13
Alt Flying Fox	0,382	0,382	0,382	0,886	2,0	3.618	1.13	1.13
Langosta	0,886	0,886	0,382	0,886	2.618	3.618	1.618	1.618
Cisne blanco	1.382	2.618	0.236	0.5 0.5	1.128	2,0	1.126	2.618
Cisne negro	0,382	0,724	2,0	4.237	0.5 0.5	0,886	0,382	0,886
Max Bat	0,382	0.618	0,382	0,886	1.272	2.618	0,886	0,886
Max Gartley	0,382	0.618	0,382	0,886	1.128	2.236	0.618	0,786
Max Dragonfly	0.618	0,886	0,382	0,886	1.272	2.618	1.272	1.618
Alt Barracuda	0,446	0.618	0.618	0,886	1.618	2.618	1.128	1.128
Una langosta	0.276	0,446	1.128	2.618	1.618	2.618	0.618	0.618
Una Libelula	0,382	0.618	1.128	2.618	1.272	1.272	0.618	0,786
Un zorro volador	0,382	0.618	1.128	2.618	2	2.618	1.128	1.128
Un gartley	0.618	0,786	1.128	2.618	1.618	1.618	1.272	1.272
Poni de mar	0,128	3.618	0,382	0.5 0.5	1.618	2.618	0.618	3.618

Parámetros de entrada

Amplitud: este parámetro controla el tamaño de los patrones que se encuentran en el gráfico.
Desviación: margen de movimiento algorítmico para el reconocimiento de patrones. Aumente para encontrar más patrones.
Período de ruptura: período de ruptura de Donchian para las señales de negociación.
Max History Bars: cantidad de barras de historial para evaluar cuándo se carga el indicador.
Mostrar estadísticas: active o desactive las estadísticas de la pantalla de rendimiento.
Puntos de visualización: muestra etiquetas de puntos de precio (etiquetas X, A, B, C, D).
Mostrar proporciones: muestra las proporciones de los patrones.
Visualizar proyecciones - Visualizar la zona de inversión potencial (PRZ)
Mostrar niveles SL / TP: muestra niveles adecuados de stop-loss y take-profit.
Configuración de patrones: elija qué patrones buscar: deshabilite todos los que no usa.
Configuración de dibujo: configure los colores de los patrones alcistas y bajistas, así como los tamaños de fuente.
Proporciones: active o desactive las proporciones y elija sus propios colores de proporción.
Proyecciones: muestra u oculta las proyecciones de Fibonacci en el gráfico.
Desgloses: habilite o deshabilite los desgloses y configure los tamaños y colores de flecha deseados.
Alertas: habilite las alertas de pantalla / correo electrónico / push / sonido para desgloses, patrones o ambos.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de PZ Trading .

", "url": "https://www.mql5.com/es/market/product/1502", "small_icon": "https://c.mql5.com/31/104/pz-harmonics-mt5-logo-60x60-2795.png", "middle_icon": "https://c.mql5.com/31/445/pz-harmonacci-patterns-mt5-logo-140x140-2311.png", "icon": "https://c.mql5.com/31/247/pz-harmonacci-patterns-mt5-logo-200x200-1349.png", "rating": 3, "price": 149, "published": 1377532577, "popularity": 8.309734128342022, "category": "Indicator", "votes": 6 }, { "id": 1398, "title": "PZ Wolfe Waves MT5", "description": "

Las ondas de Wolfe son patrones comerciales naturales presentes en todos los mercados financieros y representan una lucha por un precio de equilibrio. Estos patrones pueden desarrollarse en períodos de tiempo a corto y largo plazo y son uno de los patrones de reversión predictiva más confiables que existen, normalmente preceden movimientos de precios fuertes y largos.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Señales comerciales claras
Increíblemente fácil de comerciar
Colores y tamaños personalizables.
Implementa estadísticas de desempeño
Muestra niveles adecuados de stop-loss y take-profit.
Implementa alertas por correo electrónico / sonido / visuales

El indicador dibuja el patrón y la flecha de ruptura simultáneamente para evitar que el indicador repinte el patrón a medida que se expande. Sin embargo, puede volver a pintar con moderación, no muy a menudo, si la ruptura de entrada ocurre muchas veces, lo que hace que el indicador se vuelva a dibujar. El indicador no es pintura de fondo.

Definición de Wolve Wave

Una ola de lobo debe tener las siguientes características. ( Haga clic aquí para ver un ejemplo )

Las ondas 3-4 deben permanecer dentro del canal creado por 1-2
La onda 4 está dentro del canal creado por las ondas 1-2
La onda 5 excede la línea de tendencia creada por las ondas 1 y 3

Parámetros de entrada

Amplitud: la amplitud representa la cantidad mínima de barras entre puntos de precio alternativos. Para encontrar patrones grandes, aumente el parámetro de amplitud. Para encontrar patrones más pequeños, disminuya el parámetro de amplitud. Puede cargar el indicador muchas veces en el gráfico para encontrar patrones superpuestos de diferentes tamaños.
Período de ruptura: período de ruptura de Donchian para confirmar las rupturas de las olas de lobos. Cero significa no utilizado.
Max History Bars: cantidad de barras pasadas para evaluar cuándo se carga el indicador en el gráfico.
Mostrar estadísticas: muestra u oculta el panel de estadísticas y los datos de rendimiento.
Mostrar niveles de SL / TP: muestra u oculta los niveles de SL y TP adecuados para cada señal.
Mostrar etiquetas de precios: muestra u oculta las etiquetas de precios del patrón.
Opciones de dibujo: colores y tamaños para líneas y etiquetas alcistas o bajistas, así como tamaños de fuente.
Breakouts: colores y tamaños para las flechas de breakout.
Alertas: active o desactive alertas a voluntad.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1398", "small_icon": "https://c.mql5.com/31/7/pz-wolfe-waves-mt5-logo-60x60-2758.png", "middle_icon": "https://c.mql5.com/31/447/pz-wolfe-waves-mt5-logo-140x140-6271.png", "icon": "https://c.mql5.com/31/7/pz-wolfe-waves-mt5-logo-200x200-7933.png", "rating": 0, "price": 99, "published": 1377248776, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1396, "title": "PZ Candlestick Patterns MT5", "description": "

Este indicador reconoce más de 30 patrones de velas japonesas y los resalta maravillosamente en el gráfico. Es simplemente uno de esos indicadores sin los que los operadores de acciones de precios no pueden vivir.

Mejora tu análisis técnico de la noche a la mañana
Detecta patrones de velas japonesas fácilmente
Comercio de patrones de inversión confiables y universales
Salte a las tendencias establecidas de forma segura utilizando patrones de continuación
El indicador no se repinta e implementa alertas

Detecta tantos patrones que el gráfico puede verse realmente desordenado, lo que dificulta su lectura. Es posible que el operador deba deshabilitar patrones no deseados de las entradas del indicador para que el gráfico sea más legible.

Detecta patrones de 1 barra, 2 barras, 3 barras y barras múltiples
Detecta patrones de reversión, continuación y debilidad.
Los patrones se pueden habilitar o deshabilitar

Los patrones alcistas se etiquetan en azul , los patrones bajistas se etiquetan en rojo y los patrones neutros se etiquetan en gris .

Lista de patrones de velas detectados

Break-Away (a.k.a Line Strikes) from 1 to 5 bars
Fakey (a.k.a Hikkake)
Counter Gap
Three Soldiers / Three Crows
Hammers / Shooting Star / Hanging Man
Engulfing
Outside Up / Outside Down
Harami
Inside Up / Inside Down
Morning Star / Evening Star
Kicker
Piercing / Dark Cloud
Belt Hold
Rising Three / Falling Three from 1 to 5 bars
Tasuki Gap
Side by Side Gap
Windows
Advance Block / Descend Block
Deliberation
Marubozu
Squeeze Alert (a.k.a Master Candle)
Dojis

Configuraciones

Barras de pintura
Active / desactive el resaltado de patrones usando el color de las barras.
DisplayLabels
Muestra u oculta etiquetas de texto que muestran el nombre de los patrones reconocidos.
BullLabel / BearLabel
Elija el color de las etiquetas de texto para los patrones alcistas y bajistas.
DisplayRectangles
Mostrar u ocultar cuadros que rodean los patrones reconocidos.
Toro Rectángulo / Oso Rectángulo
Elija el color de los rectángulos para los patrones alcistas y bajistas.
Patrones de 1 barra
Active / desactive el reconocimiento de patrones de 1 barra uno por uno.
Patrones de 2 barras
Active / desactive el reconocimiento de patrones de 2 barras uno por uno.
Patrones de 3 barras
Active / desactive el reconocimiento de patrones de 3 barras y más.
DonchianFilter
Esta opción solo se aplica a los patrones de inversión. Dado que los patrones de inversión solo son válidos al final de una tendencia, se debe colocar algún tipo de condición para mostrar o ignorar ciertos patrones. Un filtro Donchian nos permite filtrar cualquier patrón de inversión usando el último / último número de barras deseado. El comportamiento predeterminado es ignorar los patrones de inversión bajista por debajo de la más alta de las últimas cuatro barras, e ignorar los patrones de inversión alcista por encima de la más baja de las últimas cuatro barras. Este parámetro le permite activar / desactivar este filtro.
Reversión Donchian
El número deseado de barras para evaluar para mostrar o ignorar los patrones de inversión. (Solo se aplica si la opción anterior está habilitada)
Reversiones redundantes
Los patrones de reversión a menudo tienen lugar uno tras otro a medida que el mercado gira su dirección, señalando la reversión más de una vez a medida que el precio evoluciona. Por ejemplo, es frecuente ver reversiones muy similares a las siguientes. Un martillo alcista (barra 1), seguido de un patrón envolvente (barra 2), un patrón de afuera hacia arriba (día 3) y tres soldados (día 4), siendo todos ellos patrones de inversión redundantes después de que tuvo lugar el primer martillo. Si está deshabilitado, el parámetro RedundantReversals elimina esta redundancia y oculta los patrones de reversión futuros en la misma dirección después del primero válido.
Alertas

Habilite alertas, alertas por correo electrónico y / o alertas de sonido para los patrones habilitados anteriormente.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/1396", "small_icon": "https://c.mql5.com/31/7/pz-candlestick-patterns-mt5-logo-60x60-6980.png", "middle_icon": "https://c.mql5.com/31/447/pz-candlestick-patterns-mt5-logo-140x140-6570.png", "icon": "https://c.mql5.com/31/7/pz-candlestick-patterns-mt5-logo-200x200-1774.png", "rating": 0, "price": 79, "published": 1377011690, "popularity": 52.22520131185913, "category": "Indicator", "votes": 0 }, { "id": 1265, "title": "SignalFinder One Timeframe", "description": "

SignalFinder One Timeframe is a multicurrency indicator similar to SignalFinder. On a single chart it displays trend direction on the currently select timeframe of several currency pairs. The trend direction is displayed on specified bars.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is detected on a selected bar.
This version is optimized to decrease the resource consumption.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs (duplicates are deleted).
Bars - numbers of bars to detect trends (duplicates are deleted).
Ranking - enable/disable ranking.

\r\n

Ranking is sorting currency pairs on the basis of the stability of a signal. Calculation in a row is done from right to left.

\r\n

Currency pairs and time frames are separated by comma in the list. If a currency pairs or a timeframe does not exist or specified incorrectly, it will be highlighted with a crimson color in the table.

\r\n

The maximum bar number is 99. Values of bars with greater numbers are not displayed in the table.

\r\n

Indicator Signals:

\r\n

Blue arrow up - the specified candlestick is bullish.
Red arrow down - the specified candlestick is bearish.
Gray dot - the open price is equal to the close price of the specified bar.
Yellow dot - loading history.

", "url": "https://www.mql5.com/es/market/product/1265", "small_icon": "https://c.mql5.com/31/6/signalfinder-one-timeframe-logo-60x60-8345.png", "middle_icon": "https://c.mql5.com/31/442/signalfinder-one-timeframe-logo-140x140-7313.png", "icon": "https://c.mql5.com/31/6/signalfinder-one-timeframe-logo-200x200-6057.png", "rating": 0, "price": 30, "published": 1375283273, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1222, "title": "Actual Tick Footprint Volume Chart", "description": "

This new unique indicator Actual tick footprint (volume chart) is developed for using on Futures markets, and it allows seeing the volume of real deals right when they are performed. The indicator Actual tick footprint (volume chart) represents a greatly enhanced tick chart that includes additional information about the volume of deal performed at a specific price. In addition, this unique indicator for MetaTrader 5 allows to clearly detecting a deal type – buy or sell.

Alike the standard tick chart, the indicator draws three lines in the window:

\r\n

Bid line.
Ask line.
Last line. Circles with digits displayed on it indicate the volume of a deal performed at the given price. The size of circles is proportional to the volume of deals, and the color is for the type of deals. Red circle indicates that a deal has been performed by the Bid price (interpreted as Sell), and green circle indicates that a deal has been performed by the Ask price (interpreted as Buy).

\r\n

Information provided by this indicator is essential for scalping on Futures markets as it allows detecting many patterns and get information which is not available to ordinary traders. For example:

\r\n

Deals with extremely high volume. Further, the price of that deals will probably be a resistance level.
Deals of what type are performed in a given range - Buy or Sell. It allows estimating a direction of exiting from accumulation.
Behavior of traders during an impulse and passing a level - whether everybody buys or sells at a sharp change of the price?
… and many other situations.

\r\n

The indicator includes the built-in system of filtration, and it displays only new deals that are performed at a changed price or with a greater volume. 1 lot deals are displayed but they don't have captions on the chart; it allows concentration on main information.

\r\n

I recommend attaching the indicator Actual tick footprint (volume chart) to М1 or М5 chart and the selecting the best scale. It will allow taking optimal decisions when scalping and when searching for an optimal entry to the market on a longer period.

\r\n

To understand the behavior of participants of the market and to interpret the volumes, I recommend using this indicator together with my other development – the product Actual depth of market chart which displays the market depth histogram.

\r\n

The parameters of the indicator allow setting up the chart appearance:

\r\n

Ticks on chart – number of last displayed deals.
Scale in pips – height of the vertical scale in points. You should adjust the value considering the current volatility.
Color volume buy – color of a buy deal marker.
Color volume sell – color of a sell deal marker.
Color label – color of a volume caption on a deal marker.

\r\n

Pay attention to the following features:

\r\n

The indicator will not work in the strategy tester, only on a real market. You can see how it works on the video.
The indicator will work only on the instruments with real volumes of deals available. First of all, it will be interesting for trades on the FORTS market and other stock markets accessible through MetaTrader 5.
The indicator displays information only when it is launched. The indicator cannot display information for the time before it was started.

", "url": "https://www.mql5.com/es/market/product/1222", "small_icon": "https://c.mql5.com/31/6/actual-tick-footprint------volume-chart-logo-60x60-6015.png", "middle_icon": "https://c.mql5.com/31/439/actual-tick-footprint-volume-chart-logo-140x140-8859.png", "icon": "https://c.mql5.com/31/6/actual-tick-footprint------volume-chart-logo-200x200-9902.png", "rating": 2.3333333, "price": 30, "published": 1373969893, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 1184, "title": "SignalFinder", "description": "

SignalFinder is a multicurrency indicator displaying trend direction for several currency pairs and time frames on a single chart.

\r\n

Main Features:

\r\n

The indicator is installed on a single chart.
The trend is defined at the last complete bar.
Intuitive and simple interface.

\r\n

Input Parameters:

\r\n

Symbols - currency pairs.
TimeFrames - time periods (time frames).

\r\n

Currency pairs and time frames are separated by comma in the list.

\r\n If a currency pair or a time frame does not exist or is mistyped, it is marked in crimson in the table.
\r\n

\r\n

Indicator Signals:

\r\n

blue up arrow - the last complete candlestick is a bullish one.
red down arrow - the last complete candlestick is a bearish one.
gray dot - open price is equal to close one of the last complete bar.

", "url": "https://www.mql5.com/es/market/product/1184", "small_icon": "https://c.mql5.com/31/6/signalfinder-logo-60x60-9538.png", "middle_icon": "https://c.mql5.com/31/439/signalfinder-logo-140x140-7744.png", "icon": "https://c.mql5.com/31/6/signalfinder-logo-200x200-2743.png", "rating": 0, "price": 30, "published": 1373624903, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1034, "title": "Good Time", "description": "

Indicator for Highlighting Any Time Periods such as Trade Sessions or Week Days

We do we need it? Looking through the operation results of my favorite Expert Advisor in the strategy tester I noticed that most deals it opened during the Asian session were unprofitable. It would be a great idea to see it on a graph, I thought. And that was the time I bumped into the first problem - viewing only the Asian session on a chart. And hiding all the others. It is not a problem to find the work schedule of exchanges in Tokyo or Singapore, but how to highlight their operation time only and nothing else?

The second problem appeared later. For some reason all the deals performed on Thursdays were unprofitable, while on the other days everything went good. What was wrong with Thursdays so that my Expert Advisor couldn't cope with them? I started analyzing the situation, and so I needed to highlight all Thursdays on a chart. This was the second problem.

The third problem appeared when I decided to compare the price behavior between two sessions. I thought that the American session was somehow connected with the Asian one, so I needed to highlight both of them and remove all the rest. And that was the third problem.

Comparing these problems, I had come to a decision to start doing something, so I started developing an indicator that would solve all these problems. That is how the GoodTime indicator appeared.

GoodTime:

highlights any time periods, for example, sessions;
can highlight a selected day only, for example, Thursday;
adds a caption to every highlighted period, for example, \"Tokio THU\";
highlights bars, candlesticks or lines automatically tracking the representation type selected for your chart;
highlights selected interval with vertical filling;
or by underlining;
or searches for a minimum and maximum value of the price at a selected time range and then highlights the range between the minimum and the maximum point.

Several instances of the GoodTime indicator can work on the same chart at the same time; they will highlight different periods. Thus you can highlight two trade sessions and compare them with each other.

GoodTime can be used for making statements and screenshots, where you can draw attention to specific bars or candlesticks on a chart. You can use it for analyzing Expert Advisors by highlighting trade sessions and week days on a chart for further examination.

GoodTime is also suitable for manual trading as it highlights the work time of your colleagues located in other time zones and general trade sessions.

You can always download a demo version of the indicator before purchasing it.

Wish you fair trends and may the luck be with you!

", "url": "https://www.mql5.com/es/market/product/1034", "small_icon": "https://c.mql5.com/31/5/good-time-logo-60x60-4608.png", "middle_icon": "https://c.mql5.com/31/446/good-time-logo-140x140-1223.png", "icon": "https://c.mql5.com/31/5/good-time-logo-200x200-1423.png", "rating": 0, "price": 30.7, "published": 1371475777, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 1051, "title": "Color Candles Identify the Major Trend", "description": "

El indicador incluye dos partes.

Parte I: Las velas de colores muestran la tendencia principal

Las velas de colores sirven para identificar el estado del mercado mediante las velas de colores.

Como se muestra en las capturas de pantalla, si el color es Aqua, el mercado se encuentra en un estado en el que se deben realizar órdenes largas o salir de órdenes cortas. Si el color es Tomate, es el momento de realizar pedidos cortos o salir de pedidos largos.

Si el color cambia, es mejor esperar a que finalice (hasta que se cierre la barra actual).

Parte II: Dibujar bandas

Las bandas interiores se definen como zona segura y las bandas exteriores son para órdenes cerradas.

Estrategia comercial como se muestra a continuación:

Si el color es Aqua y el precio está en las bandas internas, haga un pedido largo, cuando el precio cruce las bandas externas, es hora de cerrar el pedido.
Si el color es tomate y el precio está en las bandas interiores, haga un pedido corto, cuando el precio cruce las bandas exteriores, será el momento de cerrar el pedido.

Nota : solo mercado de entrada cuando el precio está en las bandas internas. Esto es muy importante.

Parámetros de entrada

ShowColorCandle - verdadero significa indicador dibujar vela de color.
AlertColorChange - verdadero significa que habrá una alerta cuando finalice el cambio de color.
EmailColorChange - verdadero significa que habrá un correo electrónico cuando finalice el cambio de color.
ShowBands - indicador de medios verdaderos dibuja las bandas
AlertCrossOuterBands - cierto hombre habrá alerta cuando el precio cruce las bandas exteriores
AlertCrossOuttrBands - verdadero significa que habrá un correo electrónico cuando el precio cruce las bandas exteriores.

MT4 Version: https://www.mql5.com/es/market/product/10455

", "url": "https://www.mql5.com/es/market/product/1051", "small_icon": "https://c.mql5.com/31/140/color-candles-identify-the-major-trend-logo-60x60-9345.png", "middle_icon": "https://c.mql5.com/31/438/color-candles-identify-the-major-trend-logo-140x140-4973.png", "icon": "https://c.mql5.com/31/140/color-candles-identify-the-major-trend-logo-200x200-6313.png", "rating": 0, "price": 30, "published": 1369130978, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 919, "title": "Historical Memory B150", "description": "

The B150 model is a fully revised version of the Historical Memory indicator with a significantly improved algorithm. It also features a graphical interface what makes working with this perfect tool quick and convenient.

Indicator-forecaster. Very useful as an assistant, acts as a key point to forecast the future price movement.

The forecast is made using the method of searching the most similar part in the history (patter). The indicator is drawn as a line that shows the result of change of the close price of bars. Now you can visually find and compare the quality of a history pattern with an actual pattern. In addition, the indicator is capable of forecasting by analyzing several patterns at once.

Input parameters

Forecast

Prediction Freeze - allows to freeze displayed forecast.
Layers Show Mode - layer display mode: SHOW_ALL_LAYERS - all layers will be shown as separate lines; SHOW_AVERAGE - a multi-layer view as a smoothed line.
Show All Backward Lines - backward lines of all layers will be displayed.
Pattern: Size(in bars)[1...] - the size of the pattern in bars.
Prediction: the number of bars [1...] - the number of bars used for the forecast.
Searching: depth of history(in bars)(0 - all bars) - the depth of the history used to search for the best correlation.
Searching: Step(in bars) - search step: the higher step value provides a higher speed with a lower search quality.
Prediction: Layers total [1...20] - the number of layers: the more layers, the greater the variability of the forecast.
Searching: Start bar shift (in history) - shift of the bar from which the forecast begins.

Graphics

Objects Name Prefix - prefix name of the graphic objects.

", "url": "https://www.mql5.com/es/market/product/919", "small_icon": "https://c.mql5.com/31/4/Historical_Memory_B150__1_60x60.png", "middle_icon": "https://c.mql5.com/31/445/historical-memory-b150-logo-140x140-5838.png", "icon": "https://c.mql5.com/31/4/Historical_Memory_B150__1.png", "rating": 5, "price": 40, "published": 1365677068, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 901, "title": "PnF Chart", "description": "

This indicator displays Point & Figure charts (PnF charts) in \r\n the indicator window. PnF charts show only price movements that are \r\n bigger than the specified box size. It helps to eliminate noise and \r\n allows focusing on main trends.

\r\n

Time is not a factor here. \r\n Only price movements are taken into account. That is why PnF chart is \r\n not synchronized with the main chart it is attached to.

\r\n

More about PnF charts: http://stockcharts.com/school/doku.php?id=chart_school:chart_analysis:pnf_charts

\r\n

Indicator works in two modes:

\r\n

CLOSE - only close prices are taken into account while building the chart;
HIGH_LOW - only high/low prices are taken into account.

\r\n

The box size can be specified in a two different ways:

\r\n

PIPS - as an absolute value of pips;
ATR - as a current value of ATR indicator (Note: current ATR value \r\n will be different every time you reinitialize or reattach the \r\n indicator!).

\r\n

Other features:

\r\n

Reversal amount can be changed;
\r\n
Indicator colors are fully customizable;
\r\n
Grid can be turned on and off;
\r\n
The chart can be moved and zoomed in/out using keyboard.

\r\n

Keys:

\r\n

W, S, A, D - move the chart;
Q, E - zoom in/out;
G - show/hide grid.

\r\n

Note: The indicator does not work in the Strategy Tester (backtesting).

", "url": "https://www.mql5.com/es/market/product/901", "small_icon": "https://c.mql5.com/31/4/PnF_Chart_60x60.png", "middle_icon": "https://c.mql5.com/31/440/pnf-chart-logo-140x140-1424.png", "icon": "https://c.mql5.com/31/4/PnF_Chart.png", "rating": 3.6, "price": 0, "published": 1365495341, "popularity": 1.1204570156252736, "category": "Indicator", "votes": 5 }, { "id": 854, "title": "DLMACD", "description": "

DLMACD - Divergence Local (Wave) MACD. The indicator displays divergences by changing the color of the MACD histogram. The indicator is easy to use and configure. It was created as an addition to the previously published DWMACD.

For the calculation, a signal line or the values of the standard MACD histogram can be used. You can change the calculation using the UsedLine parameter. It is advisable to use a signal line for calculation if the histogram often changes directions and has small values, forming a kind of flat. To smooth the histogram values set the signal line at UsedLine and a small period (2-5). As the period increases, the indicator lags behind the price (which applies to any indicator).

The indicator is calculated at the current price (close).

You can use your own moving average values in the settings. It is possible to use 4 standard types of moving averages (SMA, EMA, LWMA, SMMA). The CONST type has also been introduced - this is a straight line (constant value) - it cannot be used in this indicator.

The local divergence displayed by this indicator reflects the price movement after the divergence. Significant local divergence occurs with simultaneous divergence on DWMACD. If DWMACD does not show divergence, then movement along local divergence may not last long, although it will be strong. In this case, the market becomes more volatile.

The divergence colors correspond to the intuitive: blue - looking for purchases, red - sales.

Note: the next divergence cancels the previous one!

Have a successful trading!

", "url": "https://www.mql5.com/es/market/product/854", "small_icon": "https://c.mql5.com/31/4/DLMACD_60x60.png", "middle_icon": "https://c.mql5.com/31/439/dlmacd-logo-140x140-7408.png", "icon": "https://c.mql5.com/31/4/DLMACD.png", "rating": 0, "price": 0, "published": 1364540637, "popularity": 0.2861080457496008, "category": "Indicator", "votes": 0 }, { "id": 821, "title": "Ticks WPR", "description": "

The Williams' Percent Range (%R) indicator drawn using a tick chart. After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

WPR Period - period of the indicator.
Overbuying level - overbought level.
Overselling level - oversold level.
Сalculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of WPR signals (from 0 to 100). You can find their description in the Signals of the Williams Percent Range section of MQL5 Reference.

\r\n

The oscillator has required direction.
Reverse behind the level of overbuying/overselling.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - WPR, 1 - SIGNAL_UP, 2 - SIGNAL_DOWN.

", "url": "https://www.mql5.com/es/market/product/821", "small_icon": "https://c.mql5.com/31/4/Ticks_WPR_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-wpr-logo-140x140-8288.png", "icon": "https://c.mql5.com/31/4/Ticks_WPR.png", "rating": 0, "price": 30, "published": 1363706732, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 827, "title": "Ticks ATR", "description": "

The Average True Range (ATR) indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

ATR Period - number of single periods used for the indicator calculation.
The number of ticks to identify Bar - number of single ticks that form OHLC.
Price levels count - number of displayed price levels (no levels are displayed if set to 0 or a lower value).
Сalculated bar - number of bars for the indicator calculation.

", "url": "https://www.mql5.com/es/market/product/827", "small_icon": "https://c.mql5.com/31/4/Ticks_ATR_60x60.png", "middle_icon": "https://c.mql5.com/31/445/ticks-atr-logo-140x140-3815.png", "icon": "https://c.mql5.com/31/4/Ticks_ATR.png", "rating": 0, "price": 30, "published": 1363706235, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 820, "title": "Ticks Price Channel", "description": "

The Price Channel indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period for determining the channel boundaries.
Price levels count - number of displayed price levels (no levels are displayed if set to 0).
Bar under calculation - number of bars on the chart for the indicator calculation.

\r\n

Buffer indexes: 0 - Channel upper, 1 - Channel lower, 2 - Channel median.

", "url": "https://www.mql5.com/es/market/product/820", "small_icon": "https://c.mql5.com/31/4/Ticks_Price_Channel_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-price-channel-logo-140x140-9205.png", "icon": "https://c.mql5.com/31/4/Ticks_Price_Channel.png", "rating": 0, "price": 30, "published": 1363705892, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 818, "title": "Ticks Heiken Ashi", "description": "

The Heiken Ashi indicator drawn using a tick chart. It draws synthetic candlesticks that contain a definite number of ticks.

\r\n

Parameters:

\r\n

option prices - price option. It can be Bid, Ask or (Ask+Bid)/2.
the number of ticks to identify Bar - number of ticks that form candlesticks.
price levels count - number of displayed price levels (no levels are displayed if set to 0 or a lower value).
calculated bar - number of bars on the chart.

\r\n

Buffer indexes: 0 - OPEN, 1 - HIGH, 2 - LOW, 3 - CLOSE.

", "url": "https://www.mql5.com/es/market/product/818", "small_icon": "https://c.mql5.com/31/4/Ticks_Heiken_Ashi_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-heiken-ashi-logo-140x140-5115.png", "icon": "https://c.mql5.com/31/4/Ticks_Heiken_Ashi.png", "rating": 0, "price": 30, "published": 1363337897, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 815, "title": "Ticks Bars", "description": "

This tick indicator draws synthetic bars/candlesticks that contain a definite number of ticks.

\r\n

Parameters:

\r\n

option prices - price option. It can be Bid, Ask or (Ask+Bid)/2.
the number of ticks to identify Bar - number of ticks that form OHLC.
price levels count - number of displayed price levels (no levels are displayed if set to 0 or a lower value).
calculated bar - number of bars on the chart.

\r\n

Buffer indexes: 0 - OPEN, 1 - HIGH, 2 - LOW, 3 - CLOSE.

", "url": "https://www.mql5.com/es/market/product/815", "small_icon": "https://c.mql5.com/31/4/Ticks_Bars_60x60.png", "middle_icon": "https://c.mql5.com/31/438/ticks-bars-logo-140x140-7175.png", "icon": "https://c.mql5.com/31/4/Ticks_Bars.png", "rating": 4, "price": 0, "published": 1363256573, "popularity": 0.6488636669050066, "category": "Indicator", "votes": 2 }, { "id": 814, "title": "DWMACD", "description": "

DWMACD - Divergence Wave MACD. The indicator displays divergences by changing the color of the MACD histogram. The indicator is easy to use and configure.

The indicator is calculated at the current price (close).

You can use your own moving average values in the settings. It is possible to use 4 standard types of moving averages (SMA, EMA, LWMA, SMMA). The CONST type is also introduced - this is a straight line (constant value). When using CONST, the value is taken from the period of the specified line. You cannot use CONST to build the MACD itself. Can only be used when drawing a terminator line. The terminator line divides the histogram into upper and lower parts. In the standard MACD, this is the zero line. Those. if you want to use standard values with a zero terminator, use the CONST for the terminator line with a period of 0. In this indicator, the terminator can be a moving average calculated from the base calculated line specified in the UsedLine parameter. Accordingly, the divergence is calculated as the difference in the deviation of adjacent unidirectional peaks from the terminator line.

The signals of this indicator are divergence signals. This is not necessarily a reversal, but definitely a weakening of the trend. With other positive conditions, it is worth entering the market using this indicator when the terminator line is broken by a divergent wave, expecting a long trend. It is also possible that the emerging divergence is not justified and the price continues to move. On the histogram, this will look like the color of the divergence, replaced by the color of a simple movement. In this case, the price movement will continue at least one more wave (as a rule).

The divergence colors correspond to the intuitive: blue - looking for purchases, red - sales.

Note: the next divergence cancels the previous one!

In my opinion, the indicator demonstrates the best results with default settings, but you can find parameters more suitable for you.

Have a successful trading!

", "url": "https://www.mql5.com/es/market/product/814", "small_icon": "https://c.mql5.com/31/4/DWMACD__1_60x60.png", "middle_icon": "https://c.mql5.com/31/440/dwmacd-logo-140x140-8074.png", "icon": "https://c.mql5.com/31/4/DWMACD__1.png", "rating": 0, "price": 30, "published": 1363173095, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 793, "title": "TrailingStop MA", "description": "

El indicador dibuja dos media móviles simples usando los precios High y Low.

\r\n

La línea MA_High se muestra cuando la media móvil se dirige hacia abajo. Se puede utilizarla para colocar la orden Stop para la posición de venta.

\r\n

La línea MA_Low se muestra cuando la media móvil se dirige hacia arriba. Se puede utilizarla para colocar la orden Stop para la posición de compra.

\r\n

Este indicador se utiliza en el Asesor Experto TrailingStop.

\r\n

Parámetros

\r\n

Period - período de cálculo de la media móvil.
Deviation - ratio de la convergencia/divergencia de las líneas.

\r\n

Números de los búferes: 0 - MA_High, 1 - MA_Low.

", "url": "https://www.mql5.com/es/market/product/793", "small_icon": "https://c.mql5.com/31/4/MAStop_200_60x60.png", "middle_icon": "https://c.mql5.com/31/445/trailingstop-ma-logo-140x140-1882.png", "icon": "https://c.mql5.com/31/4/MAStop_200.png", "rating": 3.5, "price": 0, "published": 1363159740, "popularity": 0.3623236161311827, "category": "Indicator", "votes": 2 }, { "id": 546, "title": "Angulation", "description": "

According to Bill Williams' trading strategy described in the book \"Trading Chaos: Maximize Profits with Proven Technical Techniques\" the indicator displays the following items in a price chart:

\r\n

1.Bearish and bullish divergent bars:

\r\n

Bearish divergent bar is colored in red or pink (red is a stronger signal).
Bullish divergent bar is colored in blue or light blue color (blue is a stronger signal).

\r\n

2. \"Angulation\" formation with deviation speed evaluation.

\r\n

3. The level for placing a pending order (displayed as a dashed line).

\r\n

Angulation is formed by divergence of two lines:

\r\n

price line that passes through the borders of bars. Lower borders of bars are used during upward motion upper borders are used during downward motion
balance line that passes through the Alligator jaw (blue line).

\r\n

Angulation is formed after forming a divergent bar outside the Alligator jaws.

\r\n

The higher the price deviation angle and balance lines, the better is Angulation. In this version instead of measuring the angle, calculation of deviation speed is performed. The higher the price deviation line and balance lines, the better is the Angulation. Deviation speed is measured in points per 1 bar or in points per one hour.

\r\n

Deviation speed is displayed next to the divergent bar. There is a filter in the settings on the minimum deviation speed as well as an option to select the displayed measurement unit.

\r\n

You can select one of two algorithms of drawing the balance lines:

\r\n

Simple - the line is drawn from the crossing bar to the point of the corresponding divergent bar (moved 8 bars ahead);

\r\n

Advanced - the algorithm considers the duration of formed Angulation. When a boundary value is reached it draws the balance line so that the probability of a false angulation is minimal when the price price moves parallel.

\r\n

Settings:

\r\n

Max Bars – number of bars calculated on the chart;
Set Divergent Bar – settings for divergent bars;
Show Divergent Bar – display divergent bars for which the Angulation hasn't been formed;
Divergent Bar Alert – use alerts for divergent bars;
Set Angulation – settings for Angulation;
Angulation Aler – use alerts for Angulation;
Comments for missed Divergent Bars – comment the reason why the Angulation to the divergent bar wasn't formed;
Check Awesome Oscillator – check the values of the Awesome Oscillator histogram according to Bill Williams's trading strategy;
Min duration of Angulation – minimum formation duration (possible minimum=2);
Max duration of Angulation – maximum formation duration;
Type of Algorithm – type of the algorithm used to draw the balance line;
Start checking parallel motion – boundary value of formation duration, only for the Advanced algorithm (see description);
Show Speed Differences – display deviation speed;
Show Speed in – selection of the deviation speed unit in pips/bar or pips/h;
Min Speed – minimum deviation speed filter;
Font Size – font size to display deviation speed;
Set Line Color – price and balance line color and style settings;
Price Line Color – price line color;
Balance Line Color – balance line color;
Style Line – line style;
Width Line – line width;
Set Alligator – the Alligator indicator parameters;
Jaw Period – jaw period;
Jaw Shift – jaw shift;
Teeth Period – teeth period;
Teeth Shift – teeth shift;
Lips Period – lips period;
Lips Shift – lips shift;
MA Method – method of averaging;
Applied Price – price type;
Set Order Level – display settings of pending order level;
Show Order Lever – display the level for placing a pending order (the level is set without considering spread);
Indent Level – order level offset from the divergent bar (in points);
Buy Stop Order Level – color of \"Buy Stop Order\" level line;
Sell Stop Order Level – color of \"Sell Stop Order\" order line;
Style Line – line style;
Width Line – line width.

\r\n

It is recommended to use the indicator on H4 and higher timeframes.

", "url": "https://www.mql5.com/es/market/product/546", "small_icon": "https://c.mql5.com/31/3/Ang_051_60x60.png", "middle_icon": "https://c.mql5.com/31/440/angulation-logo-140x140-9720.png", "icon": "https://c.mql5.com/31/3/Ang_051.png", "rating": 0, "price": 50, "published": 1362731030, "popularity": 0.6294434171102644, "category": "Indicator", "votes": 0 }, { "id": 786, "title": "Ticks Bears", "description": "

The Bears Power indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period of averaging.
The number of ticks to identify high/low - number of single ticks for determining high/low.
Calculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of Bears Power signals (from 0 to 100). You can find their description in the Signals of the Bears Power oscillator section of MQL5 Reference.

\r\n

Reverse of the oscillator to required direction.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - Bears, 3 - SIGNAL VALUE

", "url": "https://www.mql5.com/es/market/product/786", "small_icon": "https://c.mql5.com/31/4/Ticks_Bears_60x60.png", "middle_icon": "https://c.mql5.com/31/441/ticks-bears-logo-140x140-2134.png", "icon": "https://c.mql5.com/31/4/Ticks_Bears.png", "rating": 0, "price": 30, "published": 1362495964, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 785, "title": "Ticks Bulls", "description": "

The Bulls Power indicator drawn using a tick chart.

\r\n

After launching it, wait for enough ticks to come.

\r\n

Parameters:

\r\n

Period - period of averaging.
The number of ticks to identify high/low - number of single ticks for determining high/low.
Calculated bar - number of bars for the indicator calculation.

\r\n

The following parameters are intended for adjusting the weight of Bulls Power signals (from 0 to 100). You can find their description in the Signals of the Bulls Power oscillator section of MQL5 Reference.

\r\n

Reverse of the oscillator to required direction.
Divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - Bulls, 3 - SIGNAL VALUE

", "url": "https://www.mql5.com/es/market/product/785", "small_icon": "https://c.mql5.com/31/4/Ticks_Bulls_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-bulls-logo-140x140-6697.png", "icon": "https://c.mql5.com/31/4/Ticks_Bulls.png", "rating": 0, "price": 30, "published": 1362495742, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 780, "title": "Trade Area", "description": "

Most time the market is in a small oscillation amplitude. The Trade Area indicator helps users to recognize that time.

\r\n

There are 5 lines in this indicator: Area_high, Area_middle, Area_Low, SL_high and SL_low.

\r\n

Recommendations:

\r\n

When price is between Area_high and Area_Low, it's time to trade.
Buy at Area_Low level and sell at Area_high level. The SL_high and SL_low lines are the levels for Stop Loss.
Change the Deviations parameter to adjust SL_high and SL_low.

", "url": "https://www.mql5.com/es/market/product/780", "small_icon": "https://c.mql5.com/31/4/Trade_Area_60x60.png", "middle_icon": "https://c.mql5.com/31/439/trade-area-logo-140x140-8647.png", "icon": "https://c.mql5.com/31/4/Trade_Area.png", "rating": 0, "price": 30, "published": 1362387485, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 781, "title": "Digitized Candle Length", "description": "

This indicator is used to indicate the difference between the highest and lowest prices of the K line, as well as the difference between the closing price and the opening price, so that traders can visually see the length of the K line.\r\n

\r\n

\r\nThe number above is the difference between High and Low, and the number below is the difference between Close and Open.\r\n\r\n

\r\n

This indicator provides filtering function, and users can only select K lines that meet the criteria, such as positive line or negative line.

", "url": "https://www.mql5.com/es/market/product/781", "small_icon": "https://c.mql5.com/31/4/Digitized_Candle_Length_60x60.png", "middle_icon": "https://c.mql5.com/31/445/digitized-candle-length-logo-140x140-4923.png", "icon": "https://c.mql5.com/31/4/Digitized_Candle_Length.png", "rating": 0, "price": 30, "published": 1362385203, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 769, "title": "Ticks Stochastic", "description": "

The Stochastic Oscillator indicator is drawn on the tick price chart.

\r\n

After launching it, wait for enough ticks to come.

\r\nParameters:\r\n

K period - number of single periods used for calculation of the stochastic oscillator;
D period - number of single periods used for calculation of the %K Moving Average line;
Slowing - period of slowing %K;
Calculated bar - number of bars in the chart for calculation of the indicator.

\r\n

The following parameters are intended for adjusting the weight of signals of the Stochastic oscillator (0 - 100). Their description can be found in MQL5 Reference in the section Signals of the Oscillator Stochastic.

\r\n

The oscillator has required direction.
Reverse of the oscillator to required direction.
Crossing of main and signal line.
Divergence of the oscillator and price.
Double divergence of the oscillator and price.

\r\n

Buffer indexes: 0 - MACD_LINE, 1 - SIGNALLINE, 2 - SIGNAL_UP, 3 - SIGNAL_DOWN.

", "url": "https://www.mql5.com/es/market/product/769", "small_icon": "https://c.mql5.com/31/4/Ticks_Stochastic_60x60.png", "middle_icon": "https://c.mql5.com/31/439/ticks-stochastic-logo-140x140-4890.png", "icon": "https://c.mql5.com/31/4/Ticks_Stochastic.png", "rating": 0, "price": 30, "published": 1362060685, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 10007 }

Actual Depth of Market Chart

Actual Tick Footprint Volume Chart

Calculation

Calculation

Calculation\r\n

General Parameters

Advantages

Calculation

Signals

Input Parameters

Warning System

Application

Useful information

Indicator for calibrating

ACI

Settings

Indicator for Calibrating

ACI

Settings

General Parameters

Advantages of Use

Launch Settings

General Parameters

Advantages

Anatomía del Indicador

Información técnica

Autor

Input Parameters

Author

Ulimate MTF Support & Resistance - 5 Star Best Seller

New Year Sale - save $20 (normal price $79)

Click here for Examples

Advantages of Pivot Prof

Comercio

Parámetros de entrada

Settings:

Trading

Input Parameters:

Parámetros de entrada

¿Qué es el Swing Trading?

Parámetros de entrada

Autor

Input Parameters:

Main Features

Parameters

Description

Parámetros de entrada

Soporte y preguntas

Autor

Parámetros de entrada

Autor

Formaciones de precios armónicos compatibles

Parámetros de entrada

Autor

Definición de Wolve Wave

Parámetros de entrada

Autor

Lista de patrones de velas detectados

Configuraciones

Autor

Indicator for Highlighting Any Time Periods such as Trade Sessions or Week Days

Parámetros de entrada

Input parameters

Recommendations:

Calculation
\r\n

Indicadores técnicos para MetaTrader 5

Indicator type

Precio

Fibonacci Moving Bars 5

Brilliant Keltner Channel

Tick by Tick 5

Actual COMBO Depth of Market AND Tick Volume Chart

Moving Average Bars 5

TimeFilter simple

LRS Lineal Regresion Slope

R2 oscilator

CCI normalized

Bears Bulls Histogram

Trinity Impulse Relative Vigor Index

CCI Envelopes MT5

Chaikin Money Flow

ACI Bollinger Bands

ACI Moving Average

Support and Resistance

Advanced trend builder

Pairs Trading Hedge Chart

Session Moving Average

Moving Average Angle 13 types

Custom Price Chart

Synthetic Reverse Bar

Normalized ATR three modes

All MAs 13 types MULTIPURPOSE TOOL

Ichimoku Advanced Pro

Ichimoku Advanced Free

Ichimoku Advanced Pro MTF

Normalized Volumes Indicator

Ichimoku MTF

Gann High Low Activator MTF

Multi Currency Index New

PZ Lopez Trend MT5

PZ Turtle Trading MT5

Pivot Prof

Automatic Trendlines

Heiken Ashi Smoothed New

SignalFinder MA

Best Wave

VWAP Universal

Ultimate Price Action Compine MTF

Trend check

Divergence CCI or any custom

Bullish Bearish Volume

PZ Swing Trading MT5

Volume Spread Analysis

CCFpExt

PZ Trend Trading MT5

PZ Support Resistance MT5

PZ Harmonacci Patterns MT5

PZ Wolfe Waves MT5

PZ Candlestick Patterns MT5

SignalFinder One Timeframe

Actual Tick Footprint Volume Chart

SignalFinder

Good Time

Color Candles Identify the Major Trend

Historical Memory B150

PnF Chart

DLMACD

Ticks WPR

Ticks ATR

Ticks Price Channel

Ticks Heiken Ashi

Ticks Bars

DWMACD

TrailingStop MA

Angulation

Ticks Bears

Ticks Bulls

Trade Area

Digitized Candle Length

Ticks Stochastic