{ "from": 25848, "count": 72, "list": [ { "id": 26341, "title": "Price M42 limited", "description": "

A comprehensive tool for determining \r\nthe levels of support, resistance, reversals in relation to trading \r\nsessions. The indicator's thesis can be expressed as follows:

\"Support\r\n and resistance levels are undoubtedly formed by the psychological \r\nbarriers of market participants, and influence the further behavior of \r\nthe price. But these barriers are different for different groups of traders (One man's meat is another man's poison) and can be grouped by territory or by the trading time\".

Following\r\n the thesis, the indicator detects levels and processes data separately \r\nfor three trading sessions: Asian (including Pacific), European and \r\nAmerican.

The User Manual of the indicator is located on the discussion page of the full version.

The indicator contains the following subsystems, which can be used either independently or in any combination:

Period Marks: Candles of trading sessions -\r\n group and display the data of each trading session in the form of a \r\nJapanese candle. Candles can be used for pattern analysis or to visually identify the\r\nsignal source.
Price Marshes: Support and Resistance Levels -\r\n displays support/resistance levels in the form of a gradient field of \r\nhorizontal lines, the color of which depends on the trading sessions in \r\nwhich this level occurred. The color density is directly related to the \r\nnumber of confirmations of this level. The periods of the level sources \r\ncan be selected from the range \"M1\" to \" W1\".
Proximate Missions: Nearest targets -\r\n displays the value of the two nearest levels from the top and bottom to\r\n the right of the last bar. Levels are filtered by the current trading \r\nsessions (levels of inactive trading sessions are not displayed) from \r\nthe Price Marshes data.
Periods Meters: Timers of trading sessions - displays the status of trading sessions and the time before their start/end.
Predator Mask -\r\n controls the display of sessions in the above tools, allowing you to \r\nview data only for selected (or excluding selected) trading sessions.

Inputs

The indicator uses the only input parameter Analysis depth (days). Other settings and mode changes are made via the screen interface of\r\nthe indicator.

Analysis depth (days) - depth of analysis in days.

Default settings (they will also be used in the tester): Autotracking\r\nis on; Candles, Marshes, Timers and\r\nTargets are on; Narrow mode; data source timeframe is equal to the chart timeframe.

\r\n\r\n
Trading sessions

The indicator uses the following parameters of trading sessions:

Trading session	Session time (GMT)	Color on the chart
Asian + Pacific	9.00 pm - 9.00 am	Green
European	6.00 am - 4.00 pm	Blue
American	12.00 am - 10.00 pm	Red

The offset of server time is determined automatically.

System messages

Time shift detecting ... - defines the offset of the server time.
[ Symbol ] [ Period ]: history loading ... - additional story is loaded when changing the indicator modes. If this message does not disappear within a reasonable time, reduce the value of the \"Analysis depth (days)\" input parameter.
Session candels for [Period] period are not provided - impossible to build candles on the selected period of the chart.
Untrusted price area! - prices are unknown: the price is near the boundaries of the analyzed range. Indications unreliable.

Note! This version works only with Canadian dollar\r\n(***CAD) in any pairs. The indicator can be launched on any other symbol but some of its features will be unavailable depending on the date. The full version is located here.

", "url": "https://www.mql5.com/es/market/product/26341", "small_icon": "https://c.mql5.com/31/213/price-m42-limited-logo-60x60-3429.png", "middle_icon": "https://c.mql5.com/31/441/price-m42-limited-logo-140x140-7072.png", "icon": "https://c.mql5.com/31/213/price-m42-limited-logo-200x200-5906.png", "rating": 5, "price": 0, "published": 1511431362, "popularity": 0.9088383133533307, "category": "Indicator", "votes": 1 }, { "id": 26489, "title": "Hunting for Bulls and Bears MT5", "description": "

This indicator is a multitimeframe trading strategy. It has the levels for stop loss, take profit and entry point. The order level can also be set manually.

The indicator uses the regularity of the market, which manifests itself on all instruments, and does not require adjustment of the parameters.

The strategy uses a proprietary approach to determining: trend, volatility, hierarchy of timeframe significance, the size of the history period (the number of candles), which is important for making a trading decision.

The indicator generates a signal after the candle on the current chart is closed:

The higher timeframes are used for calculations. Therefore, sudden changes in the market (within one trading day) may cause the signal to change as the chart is updated, since the candles of the higher timeframes are not closed yet. But due to this the indicator is able to interact with positions that are currently open (it analyzes the most relevant and timely situation on the market).

Settings

take_profit - hide/show the take profit label.
stop_loss - hide/show the stop loss label.
sound - sound alert.
send_mail - send an email notification.
send_notification - send a mobile notification.

", "url": "https://www.mql5.com/es/market/product/26489", "small_icon": "https://c.mql5.com/31/215/hunting-for-bulls-and-bears-mt5-logo-60x60-6780.png", "middle_icon": "https://c.mql5.com/31/445/hunting-for-bulls-and-bears-mt5-logo-140x140-2926.png", "icon": "https://c.mql5.com/31/215/hunting-for-bulls-and-bears-mt5-logo-200x200-9142.png", "rating": 0, "price": 99, "published": 1511426421, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26307, "title": "Charts symbol changer and synchronizer MT5", "description": "

Utilidad diseñada para cambiar el instrumento de negociación para los gráficos actuales, todos o seleccionados, el cambio de marco de tiempo y para el movimiento simultáneo en el historial (automáticamente o al hacer clic) en todos los gráficos. La lista de símbolos se lee en el \"Resumen del mercado\". Puede cambiar el color, el tamaño y la posición de los botones. La sincronización de los gráficos se produce en el momento de la primera barra visible en el gráfico activo cuando hace clic en el botón de sincronización o cuando mueve el mouse / teclado en modo automático. El TF se puede cambiar usando las teclas del cursor: izquierda / derecha, y los símbolos comerciales - arriba / abajo.

Los botones para las 8 monedas principales le permiten abrir gráficos de la lista de pares de divisas (tomados de la descripción general del mercado o de la cadena de usuario). La plantilla para nuevos gráficos se puede especificar en el parámetro \"Nombre de plantilla para nuevos gráficos\". Al cambiar la moneda, las plantillas de los gráficos actuales se guardan y las monedas del par se reemplazan en los gráficos abiertos por el indicador. Cuando vuelve a seleccionar la moneda, se cargan las plantillas correspondientes.

El modo duplicado le permite copiar objetos a todos los gráficos de la herramienta actual a la vez.

El punto de mira global le permite ver las acciones del precio de la barra especificada en los gráficos seleccionados.

Descripción de parámetros e instrucción .

La lista de funciones principales (la utilidad se mejora constantemente, todas las funciones nuevas y actualizaciones están disponibles en la pestaña \"Novedades\"):

Cambie los instrumentos comerciales para los gráficos actuales/seleccionados/todos.
Cambio de instrumentos comerciales para todos/gráficos seleccionados al cambiar en el gráfico principal (el gráfico principal es el gráfico con la utilidad instalada).
Resalte los botones de los instrumentos comerciales con el botón del mouse.
Lista preestablecida de instrumentos comerciales: todos los instrumentos actuales incluidos desde la ventana de descripción general del mercado o el conjunto de instrumentos comerciales del usuario.
Cambie TF para gráficos actuales / todos.
Abrir ventanas de gráficos para todos los pares de divisas disponibles para una de las 8 monedas principales con guardar y restaurar la plantilla de gráfico para la utilidad.
Sincronización manual o automática de gráficos con el gráfico principal
Cambio automático entre instrumentos comerciales con un intervalo y una dirección especificados.
Cambio automático entre TF con un intervalo establecido.
La capacidad de cambiar el color de los botones, el ángulo de anclaje, el desplazamiento desde el borde, el tamaño, la fuente, el número de botones en la fila, la subventana de ubicación, configurando el modo de transparencia para los botones de utilidad y TF.
Modo de varios caracteres para mostrar objetos solo del instrumento comercial actual al cambiar.
Copie, sincronice y controle la visualización de la mayoría de los objetos gráficos disponibles en los gráficos del instrumento comercial correspondiente cuando se crean y / o mueven en el gráfico principal.
Posibilidad de ignorar objetos con los prefijos especificados.
La capacidad de eliminar objetos al cambiar un instrumento comercial con los prefijos especificados o todos ellos.
Posibilidad de deshabilitar (ocultar) botones de funciones no utilizadas.
Posibilidad de ocultar / mostrar todos los botones de utilidad para el TF actual.
Resalte el color del borde del botón para obtener ganancias / pérdidas de posiciones abiertas en instrumentos comerciales.
Función de selección de barras para analizar el comportamiento del precio en su interior (resaltando y desplazándose al centro del gráfico de las barras correspondientes en los TF más pequeños).
Función de punto de mira global que muestra y mueve sincrónicamente el punto de mira en los gráficos actuales / seleccionados / todos
La utilidad puede funcionar en tres modos: simple, principal y auxiliar. Esta función le permite configurar la utilidad para administrar el punto de mira global desde cualquier gráfico.
La capacidad de resaltar en color las familias de pares de divisas por divisa base.

", "url": "https://www.mql5.com/es/market/product/26307", "small_icon": "https://c.mql5.com/31/213/charts-symbol-changer-and-synchronizer-mt5-logo-60x60-5787.png", "middle_icon": "https://c.mql5.com/31/445/charts-symbol-changer-and-synchronizer-mt5-logo-140x140-8997.png", "icon": "https://c.mql5.com/31/213/charts-symbol-changer-and-synchronizer-mt5-logo-200x200-9860.png", "rating": 5, "price": 35, "published": 1511354261, "popularity": 30.469268437012698, "category": "Utility", "votes": 2 }, { "id": 26433, "title": "Stowell", "description": "

Indicator of Stowell's Three-Bar Net Line. In this indicator, the number of bars used for determining the lines can be defined in the settings. With the default settings, the indicator draws arrows in the areas of the line breakout. The lines are not displayed on the chart by default. but can be enabled.

\r\n\r\n

\r\n

Parameters

\r\n

Alerts - enable alerts when arrows appear. Arrows appear on a forming bar and can disappear during bar formation. Therefore, it is recommended to wait for the bar with the arrow to close to make sure the breakout had actually taken place. Accordingly, the alert may be generated based on the current bar (Alerts_Bar0) and the first complete bar (Alerts_Bar1).
N - the number of bars to determine the levels.
ShowLevels - display the levels.

", "url": "https://www.mql5.com/es/market/product/26433", "small_icon": "https://c.mql5.com/31/215/stowell-logo-60x60-7236.png", "middle_icon": "https://c.mql5.com/31/440/stowell-logo-140x140-7065.png", "icon": "https://c.mql5.com/31/215/stowell-logo-200x200-8146.png", "rating": 4, "price": 0, "published": 1511262925, "popularity": 0.1944247488669578, "category": "Indicator", "votes": 1 }, { "id": 25929, "title": "Reversal Expert for MT5", "description": "

Reversal Expert is a fully automatic Forex Expert Advisor. For several years, the robot enters on reversal signals to make quick profits. When the target is not reached, the position is slowly increased until it becomes profitable (see screenshots below).

\r\n

Best results are observed on GBPUSD, USDCAD, EURGBP and AUDUSD on the M15 timeframe.

\r\n\r\n

\r\n

Advantages

\r\n

Tunable risk.
Can work on several Forex pairs in the same account.
Large user base since 2013.
Lot size automatically adapted to your balance.
Reactive support channel.
Backtested since 2007.
No parameters to optimize (because optimizing is cheating).
Works well with a common DSL line (but VPS is recommended for set&forget).
The same algorithm works since 2013, no upgrade planned, no \"new settings to fit the market...\".
Very easy to install.

\r\n\r\n

\r\n

Parameters

\r\n

There is only one: Risk and I recommend to leave the default value.
However you may want to test other values with Strategy Tester.
Risk is a ratio applied on your Balance level to decide on the Lot size.
No other parameter is tunable.

\r\n\r\n

\r\n

How Does It Work?

\r\n

Reversal Expert applies the best known techniques for automated trading. There are basically 2 main modules:

\r\n

Finding good entry points. The robot detects situations where a movement is expected soon. Pending orders are set for a brief amount of time and are deleted if the expected movement doesn't happen. You will see many canceled orders, this is perfectly normal.
Exiting with a profit. Once a position is opened, the robot will look into a quick profit. If it doesn't happen, a recovery mechanism will take over the situation to avoid a loss, so the customer always ends positive.

\r\n\r\n

\r\n

Recommendation

\r\n

The recommended minimum balance is 2500 EUR (Risk=0.16).
But you can use this Expert with less balance, just increase the Risk:

2000 EUR → Risk=0.19.
1500 EUR → Risk=0.28.
1000 EUR → Risk=0.45.

", "url": "https://www.mql5.com/es/market/product/25929", "small_icon": "https://c.mql5.com/31/208/reversal-expert-for-mt5-logo-60x60-5706.png", "middle_icon": "https://c.mql5.com/31/441/reversal-expert-for-mt5-logo-140x140-1257.png", "icon": "https://c.mql5.com/31/208/reversal-expert-for-mt5-logo-200x200-5993.png", "rating": 0, "price": 997, "published": 1510840228, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 18855, "title": "Horizontal Channel Alert with Custom Fibo MT5", "description": "

El indicador está pensado para dibujar canales horizontales y zonas de señal, detectar rupturas de extremos, rebotes y objetivos según niveles de Fibonacci personalizables, con o sin alertas sonoras. Aplica automáticamente los niveles de Fibonacci elegidos a esos extremos. Cuando el precio rompe los niveles de Fibonacci activados en los ajustes, el indicador puede emitir sonido, mostrar un mensaje, enviar una notificación push al terminal móvil o un correo electrónico (si está activado).

Posibilidades:

construcción automática del canal por rango horario, por ejemplo para detectar la ruptura del rango nocturno
seguimiento automático de nuevos rebotes
invertir la escala de Fibonacci
mostrar/ocultar/contraer el panel de control
elegir uno de los 5 idiomas de la interfaz del panel
añadir tolerancia a los niveles de Fibonacci para que sean zonas de señal más anchas en lugar de líneas
dibujar niveles horizontales y Fibonacci en varios marcos temporales, conservando o borrando canales de otros marcos
construir canales por precios High/Low o Open/Close; el canal se ajusta automáticamente a los precios
bloquear el canal (hacerlo no seleccionable) para evitar borrarlo por error

Ajustes

--------- Idioma -----------

Interface Language — Idioma del panel del indicador. English (inglés), Russian (ruso), Spanish (español), German (alemán), Italian (italiano).

--------- Ajustes -----------

Auto build channel by time range (broker time) — Construir canal automáticamente por rango horario (hora del broker)
Time range HH:MM-HH:MM — Rango horario (inicio–fin)
Reverse Fibo — Invertir escala de Fibonacci
Fix the right point in the future (ignored when FixByTime) — Fijar el borde derecho en el futuro (se ignora con «Auto build channel by time range» activado)
Color Channel — Color del canal
Color Fibo lines — Color de las líneas de Fibonacci
Channel Width — Grosor de las líneas del canal en píxeles
Channel Length, bars — Longitud del canal en barras
Channel ray — Dibujar canal en rayo
Price Mode — Modo de precio: High/Low u Open/Close
Delete channels from other TF — Borrar canales de otros marcos temporales
Lock channel (prevent line movement) — Bloquear canal (impedir mover líneas)
Log channel auto-update (Experts tab) — Registrar actualización automática del canal (pestaña Expertos)

--------- Panel de control -----------

Show control panel — Mostrar panel de control
Panel X position (pixels from left edge) — Posición X del panel (píxeles desde el borde izquierdo)
Panel Y position (pixels from top) — Posición Y del panel (píxeles desde arriba)
Panel width (pixels) — Ancho del panel (píxeles)
Panel height (pixels) — Alto del panel (píxeles)

--------- Ajustes de alertas -----------

Alerts — Activar/desactivar alertas
Send Notifications — Enviar notificaciones
Send alerts to e-mail — Enviar alertas por correo electrónico
Alert only on first touch of level (for each direction) — Alerta solo en el primer contacto del nivel (por cada dirección)
Alert on candle close above/below level — Alerta al cierre de vela por encima/debajo del nivel
Time-based alerts (N bars inside level range) — Alertas por tiempo (N barras dentro del rango de niveles)
Bottom level of range, % — Nivel inferior del rango de alertas por tiempo, % (por defecto 38,2)
Top level of range, % — Nivel superior del rango de alertas por tiempo, % (por defecto 61,8)
Number of consecutive bars inside range — Número de barras consecutivas dentro del rango de alertas por tiempo
Limit Alerts — Límite de alertas

--------- Marcadores de alertas -----------

Show alert markers on chart — Mostrar marcadores de alertas en el gráfico
Alert marker color — Color del marcador de alerta
Marker size (1-5) — Tamaño del marcador (1–5)
Maximum number of markers (0 = unlimited) — Número máximo de marcadores (0 = ilimitado)

---- Líneas Fibo personalizadas (-1 = desactivar) ----

Level 0 … Level 29, % — Valores para el nivel 0 … nivel 29, %
Alert level 0 … Alert level 29 — Activar/desactivar alertas para el nivel 0 … nivel 29
Level 0 name … Level 29 name — Etiqueta del nivel 0 … nivel 29

Consejos.

Para mover el canal a izquierda o derecha sin cambiar su tamaño, arrastre la parte central de la línea superior o inferior del canal.
Para alargar o acortar el canal, arrastre el extremo izquierdo o derecho de la línea superior o inferior del canal hasta la posición deseada y suelte.
Si tras arrastrar un borde del canal la línea queda desalineada, haga clic en cualquier punto del gráfico con el botón izquierdo del ratón y el canal y los niveles de Fibonacci se realinearán.
Para invertir la escala de Fibonacci, active Reverse Fibo.
Para seguir rebotes automáticamente, active Fix the right point in the future. El borde izquierdo del canal queda fijo; el derecho sigue a la nueva barra.
Si está activada la construcción automática del canal por tiempo (p. ej. para ruptura de un rango), el canal solo se reconstruye automáticamente por tiempo; para ajustarlo a mano, desactive esa opción.
Con Delete channels from other TF = false, al cambiar de marco temporal se conservan los canales existentes y se añade un nuevo canal en el marco elegido. Con Delete channels from other TF = true (por defecto), al cambiar de marco temporal se eliminan los canales antiguos y solo se dibuja el nuevo canal en el nuevo marco.
Si usa notificaciones push, no recomendamos poner Limit Alerts muy alto o ilimitado, ya que demasiadas notificaciones push desde una cuenta pueden hacer que el servicio MetaTrader restrinja el envío.

", "url": "https://www.mql5.com/es/market/product/18855", "small_icon": "https://c.mql5.com/31/213/horizontal-channel-alert-with-custom-fibo-mt5-logo-60x60-6142.png", "middle_icon": "https://c.mql5.com/31/440/horizontal-channel-alert-with-custom-fibo-mt5-logo-140x140-9214.png", "icon": "https://c.mql5.com/31/213/horizontal-channel-alert-with-custom-fibo-mt5-logo-200x200-1440.png", "rating": 5, "price": 69, "published": 1510659831, "popularity": 1.1666629260859394, "category": "Indicator", "votes": 1 }, { "id": 25963, "title": "Exp5 Tester PAD for Strategy Tester", "description": "

La utilidad le permite probar manualmente sus estrategias en el probador de estrategias. Comercio con un clic en el gráfico de visualización.

Una funcionalidad cómoda y completa para probar las habilidades comerciales ahora también está disponible en el probador de estrategias.

Forex Tester Pad es un simulador de operaciones para probadores de estrategias. Negociar utilizando indicadores.

Las principales funciones de nuestra utilidad.

	Versión MT4	Descripción completa +DEMO +PDF	Cómo comprar	Cómo instalar	Cómo obtener archivos de registro	Cómo probar y optimizar	Todos los productos de Expforex

Funciona en los probadores de estrategias MetaTrader 4 y 5;
Gestión de transacciones, posiciones y pedidos;
Posibilidad de trabajar con cualquier indicador;
Stoploss, Takeprofit, Trailingstop, Cuadrícula de Órdenes;
Panel de control compatible con gráficos EAPAD PRO;
Control de velocidad, pausa y control de gráficos en 1 clic. Etcétera.

Advertencia: ¡Este panel es para quienes prueban estrategias!

Para operar con un solo clic en un gráfico en vivo, puede descargar nuestras utilidades VirtualTradePad para MetaTrader 4 y VirtualTradePad para MetaTrader 5 .

Combinando la belleza de nuestro panel universal para EA EAPADPRO y el poder de nuestra utilidad comercial VirtualTradePad , hemos creado el producto Exp - Tester PAD para probar sus estrategias en los probadores de estrategias MetaTrader 5 y MetaTrader 4.

El simulador manual del Probador de estrategias es una utilidad para probar indicadores y habilidades comerciales en el Probador de estrategias en el modo de visualización en las plataformas MetaTrader 4 y MetaTrader 5.

¿El mercado está cerrado? ¡Ningún problema! ¡Cambie el probador!

Estimados amigos y usuarios de nuestros EA Expforex , agreguen sus calificaciones en la sección Reseñas .
¡Todas las actualizaciones de nuestro software Forex son gratuitas !
¡Esta es una utilidad comercial gratuita!

Gestión

Para utilizar este panel, habilita el modo probador de estrategias en tu terminal. Modo de visualización.

Conceptos generales: El EA reacciona al pulsar los botones sólo cuando llega un tic. Al elegir la velocidad de cotización, tenga en cuenta que el EA responde a las pulsaciones de botones sólo después de que aparece una nueva marca en la pantalla.

El panel contiene dos pestañas comerciales: Posiciones y Órdenes .

Invertir : invertir las posiciones actuales. Si hay varias posiciones, el EA las invierte todas cambiando su tipo. Comprar >> Vender y Vender >> Comprar. También se establecen Stop Loss y Take Profit.
Bloquear : bloquea las posiciones actuales. Si hay varias posiciones, el asesor calcula el lote a bloquear y abre una posición que bloquea todas las demás posiciones. Stop Loss y Take Profit se establecen en 0.
TrailingStop : realiza un seguimiento de una posición mediante un trailing stop. Un trailing stop solo se habilita si TrailingStop excede 0.
Vender/Comprar - vender/comprar.
Lotes - tamaño del lote. El paso del lote depende de las especificaciones del contrato.
Cerrar Venta/ Compra/ Todo : cierra todas las posiciones de venta/compra/todas.
Stoploss/Takeprofit : stop loss/takeprofit en puntos. 0 - no utilizado. El paso de aumento es igual a 10 pips en cotizaciones de 5 dígitos para mayor comodidad.
Modificar : botón para la modificación inmediata de los valores actuales de stop loss y takeprofit en todas las posiciones.
Vender/ Comprar STOP\\LIMIT - configuración
Eliminar Vender/ Comprar DETENER\\LIMIT - eliminar
Cuadrícula: número de órdenes pendientes dentro de una cuadrícula.
Distancia : distancia desde el precio actual hasta una orden pendiente. Nivel de colocación de pedidos y distancia entre la cuadrícula de pedidos.

Cargando indicadores al probador de estrategias.

Abra el gráfico estándar para el par de divisas deseado
Instale los indicadores que necesita para trabajar en el probador de estrategias.
Guarde la plantilla con indicadores. Escribe el nombre de la plantilla y haz clic en \"guardar\".
Ejecute el probador de estrategias en modo visual.
Después de iniciar el probador de estrategias, vaya a Gráfico, Plantillas y Cargar plantilla.
Cargue la plantilla que guardó anteriormente.

Puede probar cualquier indicador que tenga.

Puede practicar el trading en el probador de estrategias incluso los fines de semana cuando el mercado está cerrado.

Al mejorar su experiencia en el trading de su estrategia, mejora el resultado de su trabajo.

Nuestro Tester Pad gratuito es una herramienta que ayuda a todos los traders del mundo.

Su gratitud son sus comentarios y reseñas de nuestra utilidad.

¿Se pregunta si los operadores pueden participar en sesiones de práctica comercial utilizando el probador de estrategias durante los fines de semana, incluso cuando el mercado está cerrado? Si es así, ¡la respuesta es sí! Al utilizar esta herramienta, los operadores pueden mejorar su experiencia comercial, perfeccionar sus estrategias y, en última instancia, mejorar sus resultados comerciales. Nuestro Tester Pad es una utilidad completamente gratuita que está disponible para operadores de todo el mundo y ha ayudado a muchos operadores a alcanzar sus objetivos. Estaríamos muy agradecidos si pudiera brindarnos sus comentarios y reseñas de nuestra utilidad. Su opinión nos ayudará a seguir mejorando nuestro producto y servir mejor a la comunidad comercial.

Simulador de trading, Entrenador, Trade Pad, Comercio manual, Panel de comercio, Panel de comercio, Utilidad de comercio, Autoprueba, Take Profit, Gestión de herramientas, Herramienta de gestión, Ayudante de Forex, Comercio de Forex, Entrenamiento de comercio virtual, Herramienta rápida, Probador manual, Backtest manual ,TesterPad, Tradepad,Trading Simulator, Trainer, Trade Pad, Manual Trade , Trade Panel ,Panel Trade,Trade Utility ,Self Test ,Take Profit ,Tool Management ,Management Tool ,Forex helper ,Forex Trade ,Training virtual trade ,Quick Tool, Manual Tester, Manual Backtest,TesterPad, Tradepad, Expforex, Vladon

", "url": "https://www.mql5.com/es/market/product/25963", "small_icon": "https://c.mql5.com/31/1728/exp5-tester-pad-for-strategy-tester-logo-60x60-2672.png", "middle_icon": "https://c.mql5.com/31/1728/exp5-tester-pad-for-strategy-tester-logo-140x140-4038.png", "icon": "https://c.mql5.com/31/1728/exp5-tester-pad-for-strategy-tester-logo-200x200-3995.png", "rating": 4.5333333015441895, "price": 0, "published": 1510071936, "popularity": 11.025618492180552, "category": "Utility", "votes": 30 }, { "id": 26153, "title": "Check Execution", "description": "

This script will show you information about the execution speed of market orders.

Instruction

1. Press \"File/Open Data Folder\"

2. Copy the log-files from ../Logs to ../MQL5/Files

3. Run the CheckExec script on EURUSD chart, for example

4. Select parameters:

AllOrders - check execution time of all market orders for EURUSD,
OpenOrders - check execution time of market orders which where used to open positions on EURUSD,
CloseOrders - check execution time of market orders which where used to close positions on EURUSD.

The result will be displayed at the top left corner of the chart.

", "url": "https://www.mql5.com/es/market/product/26153", "small_icon": "https://c.mql5.com/31/211/check-execution-logo-60x60-6478.png", "middle_icon": "https://c.mql5.com/31/440/check-execution-logo-140x140-1658.png", "icon": "https://c.mql5.com/31/211/check-execution-logo-200x200-2897.png", "rating": 1, "price": 30, "published": 1509975918, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 26224, "title": "Panic Meter limited", "description": "

The indicator measures the frequency of incoming ticks to analyze the market activity. Bullish and bearish ticks are analyzed separately, informing about the currently predominant market sentiment. According to observations, an increase in the frequency of ticks (panic) indicates the beginning of strong price changes, and an increase in the frequency of ticks in a particular direction not only accompanies a price change in this direction, but also often anticipates it.

\r\n

The indicator is indispensable for scalping.

\r\n

Distinctive features

\r\n

Greater sensitivity of the indicator and a small delay. When analyzing ticks, knowing that activity had increased five minutes ago is equivalent to not knowing.
Display as a step chart, which allows seeing the history of frequency changes.
Display of the average frequency for the previous periods, which increase in informativeness of the chart.
Separate display of ascending and descending tick frequencies.

\r\n

Appearance and use

\r\n

The chart recalculates the indication values once a second. All indicator values are expressed in 1/min.

\r\n

The indicator interface consists of the following elements (see Fig. 0)

\r\n

The current value of incoming ticks frequency is displayed on the right of the frequency chart.
The main frequency chart. It visualizes the last ten values of ticks frequency. When the current frequency exceeds the average (see below), which signifies an active market, the chart border becomes green.
The average frequency value of the current period is displayed on the left of the chart and as a gray horizontal level on the chart. It is calculated as the average frequency of ticks for the current 30 minutes over the last 10 days.
The upper limit of the chart scale is displayed in the upper left corner. The charts of all three frequencies have the same vertical scale. Although the frequency values of bullish and bearish ticks are calculated according to a slightly different formula, this value facilitates visual orientation.
The indicator of ascending (bullish) ticks frequency is the left (blue) chart, the numerical value is located to the left of it. The calculation formula involves not only the number of ticks and time, but also the price. Therefore, it would be more correct to call it the frequency of positive price changes in points. If there are significantly more ascending ticks than descending ones (which indicates a strong \"bullish\" sentiment at the moment), the border becomes blue.
The frequency indicator for the descending (bearish) ticks is the right (red) chart. Behavior and calculation are similar to item 5.

\r\n

Input parameters

\r\n

The indicator does not use input parameters and does not require configuration.

\r\n

Launching the indicator

\r\n

Drag the indicator to the desired chart. At startup, the indicator is displayed in the upper left corner, but you can double-click it and move it to the desired location. The indicator needs to receive 15 ticks before it can be visualized (the number of ticks remaining before the start is displayed in the header).

\r\n\r\n

\r\n

Attention! This is the version with a limited set of available symbols: Gold (XAUUSD) and Canadian Dollar (***CAD) in any pairs. The indicator will start on all other instruments, but it will pause for 50-100 ticks every 50-100 seconds.

\r\n

Attention! Due to technical limitations, the indicator can not be used in a visual tester.

", "url": "https://www.mql5.com/es/market/product/26224", "small_icon": "https://c.mql5.com/31/212/panic-limited-logo-60x60-3721.png", "middle_icon": "https://c.mql5.com/31/441/panic-meter-limited-logo-140x140-9343.png", "icon": "https://c.mql5.com/31/212/panic-limited-logo-200x200-5891.png", "rating": 1, "price": 0, "published": 1509975053, "popularity": 0.34697272806118296, "category": "Indicator", "votes": 1 }, { "id": 26092, "title": "TSO Total Top Bottom Divergence MT5", "description": "

A must-have tool for any strategy based on divergence detection. 10 different oscillators can be used to detect divergences and can be combined with Double Top/Bottom patterns to confirm reversal signals.

SCANNER is included. Now with Scanner you can find trading opportunities and setups easily and faster.

Features

Easily detect strong reversal signals.
10 different oscillators are available for divergence detection.
Divergence & Top/Bottom detection can operate independently or combined.
Get email / push notifications when a divergence is detected.
The indicator is not repainting.
Can easily be used in an EA (see For Developers).

Available Oscillators for Divergence Detection

Relative Strength Index (RSI).
Commodity Channel Index (CCI).
Chaikin Oscillator (CHO).
Chande Momentum Oscillator (CMO).
Moving Average Convergence Divergence (MACD).
Momentum.
Stochastic.
Stochastic RSI.
Relative Vigor Index (RVI).
Rate Of Change (ROC).

Inputs

Name: The name to appear in the parentheses at the top left corner of the oscillator window.
ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
Select Divergence Oscillator: Select one of the available divergence indicators or disable divergence detection.
Relationship between Double Top-Bottom and RSI Divergence:
- Combined: All Double Top - Bottom signals are shown but only the RSI Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and RSI Divergence indicators should be enabled.
- Independent: Each indicator presents their signals independently.
Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If RSI Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.

The following inputs are separated into groups relating to each of the available oscillators. Only the inputs relating to the indicator selected in the Select Divergence Oscillator field need to be adjusted.

RSI Period.
RSI Applied Price: The bar price to be used for RSI calculations.

CCI Period.
CCI Applied Price: The bar price to be used for CCI calculations.

CHO Fast Period: Set the fast period of CHO.
CHO Slow Period: Set the slow period of CHO.
CHO Method: Set the method of calculation of CHO.
CHO Applied Volume: The volume to be used for CHO calculations. (Use real volume only when provided, e.g. stocks, and tick volume when real is not available, e.g. FOREX).

CMO Period.

MACD Fast Period: Set the fast period of MACD.
MACD Slow Period: Set the slow period of MACD.
MACD Signal Period: Set the period for the MACD signal.
MACD Applied Price: The bar price to be used for MACD calculations.

Momentum Period.
Momentum Applied Price: The bar price to be used for Momentum calculations.

Stochastic %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic %D Period: Set the period for calculating %D of the Stochastic oscillator.
Stochastic Slowing: Set the internal smoothing of %K.
Stochastic Method: Set the method that is used to calculate %D.
Stochastic Price Field: The volume to be used for the Stochastic oscillator calculations. (Typically Real for stocks, Tick for FOREX).

Stochastic RSI period: Set the period of RSI.
Stochastic RSI %K Period: Set the period for calculating %K of the Stochastic oscillator.
Stochastic RSI %D Period: Set the period for calculating %D of the Stochastic oscillator.

RVI Period.

ROC Period.

ENABLE MetaTrader Alert / Email Alert / Push Notifications
- Disable.
- Combined: Receive alerts only when the Top/Bottom and Divergence indicators agree on a signal.
- Only Top Bottom: Receive alerts only for Top/Bottom signals.
- Only Divergence: Receive alerts only for Divergence signals.
- Both: Receive alerts for both Top/Bottom and Divergence signals.

", "url": "https://www.mql5.com/es/market/product/26092", "small_icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-60x60-4164.png", "middle_icon": "https://c.mql5.com/31/441/tso-total-top-bottom-divergence-mt5-logo-140x140-7144.png", "icon": "https://c.mql5.com/31/211/tso-total-top-bottom-divergence-mt5-logo-200x200-3406.png", "rating": 1, "price": 99, "published": 1509715802, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 26130, "title": "MMM Heiken Ashi", "description": "

MMM Heiken Ashi strategy:

\r\n

The robot uses its built-in Heiken Ashi improved and tested indicator all the time and does a calculation to determine the prices trends. It sends an order, closes or moves the Trailing Stop loss position as the indicator works. Perfect for Scalping;
It will not send an order unless the calculations determine a good trend of profit;
Like all MMM products, it is also programmed to minimize your losses and protect your money from the hostile market. We have protections like Trailing Stop Loss where the stop loss may be moved near to the pair current price once the order has positive profit. You can also define the account minimum equity percentage required to send a new order.
You can define the orders limits of profits in currency value.

\r\n

General Inputs

\r\n

Closes orders with any profit of value over in currency: this parameter works like the traditional Take Profit, but the difference is that you define its value in deposit currency, usually USD. If you do not want to use it, fill it out with 0 (zero);
Take profit (order profit ceiling): this parameter is the traditional take profit. Its value is filled out with pips units. Orders will automatically be opened with this take profit value. If you do not want to use it, fill it out with 0 (zero);
Stop loss (loss limit): this parameter is the traditional stop loss. Its value is filled out with pips units. Orders will automatically be opened with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Lots volume to trade: fill in this parameter to define the volume of the orders of this currency pair. This parameter is mandatory;
Trailing stop loss: this parameter is the traditional trailing stop loss. Its value is filled out in pips unit. Orders will automatically be open with this stop loss value. If you do not want to use it, fill it out with 0 (zero);
Orders expiration time in minutes: this parameter was created to set the order expiration order in minutes. The default value is 1440 minutes (one day). Set it to 0 if you do not want to use it. The minimum value is 10 minutes;
Maximum number of simultaneous orders to open of this symbol: this parameter defines the maximum number of simultaneous open orders of the current symbol. If you do not want to use it, fill it out with 0 (zero);
Minimum equity percentage to allow opening new orders: this parameter is used to define the minimum equity required to open new orders in order to protect your equity;
Magic Number: this parameter identifies the order the EA is working with;
Double Lots on Gain: if true, the EA will double the volume of the next orders after closing a profitable order of the current symbol. If you do not want to use it, fill it out with false. If set to true works in Martingale mode;

\r\n

Indicator's Inputs

\r\n

Number of bars to calculate trends: defines the number of bars used on trend calculations;
Moving Average Period: defines the moving average time frame to work inside Heiken Ashi algorithm. Best results if this time frame is smaller than the graphic's time frame;
Moving Average Method: defines the moving average method to work inside Heiken Ashi algorithm. Best results if this time frame is smaller than the graphic's time frame;

", "url": "https://www.mql5.com/es/market/product/26130", "small_icon": "https://c.mql5.com/31/212/mmm-heiken-ashi-logo-60x60-6018.png", "middle_icon": "https://c.mql5.com/31/438/mmm-heiken-ashi-logo-140x140-4483.png", "icon": "https://c.mql5.com/31/212/mmm-heiken-ashi-logo-200x200-5942.png", "rating": 0, "price": 99, "published": 1509715795, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 26164, "title": "GS Trend5", "description": "

The advisor is designed for autonomous automatic round-the-clock trading on the EUR/USD pair, timeframe M15.

There is a protection of the deposit from significant drawdown and a mode for saving a profitable transaction.

Trades one deal. With the set parameters, it turns out to be one per day on average.

How it works

Uses the author's algorithm for analyzing three indicators and the direction of market movement to make a decision to open a deal.

RSI
Stochastic
Bands
market direction

Opens an order based on trend characteristics with set SL and TP in accordance with the specified StopLoss and TakeProfit parameters.

The position can be accompanied by a Trailing algorithm (Use Trailing=true; parameter)

Closes a position based on reversal signs (Acceptable loss, Acceptable profit parameters) or specified StopLoss and TakeProfit parameters.

If there is no order open by him, the advisor analyzes the current opportunity for a trade.

Deposit protection: The advisor remembers the maximum deposit value reached and if the current one is less than the set percentage, SaveDeposit stops trading.

Profitable trade saving mode: The SaveProfit parameter sets the percentage of the TakeProfit parameter value.

The resulting value is used by the advisor to close the deal in the event of a market reversal.

If SaveProfit = 0 the mode is not used.

Recommended conditions

Can work on any accounts, with any deposit and leverage, for example:

Deposit: 100 USD
Leverage : 1:20
Currency pair: EUR/USD
Timeframe: M15
Any types of accounts (Netting, Hedging)

Description of parameters

MagicNumber = 133500; - must be unique for each chart
SaveDeposit = 50; - percentage of deposit saved from the maximum reached (if the current is less - stops trading)
Use Money Management (Lot % from Balance) = true;
Risk level = Medium;
Lots = 0.01; - lot volume
Order Stop Loss = 800; - parameter for setting StopLoss of the transaction (more than 30)
Order Take Profit = 1000; - parameter for setting the TakeProfit of the transaction (more than 30)
Acceptable loss = 650; - acceptable loss parameter (greater than 0)
Acceptable profit = 650; - acceptable profit parameter (greater than 0)
SaveProfit = 32; - percentage of profit retention from the value set by the TakeProfit parameter when the market reverses (from 0 to 90)
Max spread for opening positions = 0; 0 - not use
------- Trailing -------
Use Trailing = true;
Trailing timer, in seconds =10;
Trailing Stop, cents = 225;
Trailing Step, cents =38
Slippage (Deviation in cents) =10;
------- Trend -------
Parameter of market movement =600; - parameter of the algorithm for determining the direction of market movement
Trend timeframe = M15;
Trend level mode = Average Open/Close;
Trend period =24;
Trend filter =1;
------- Stochastic -------
lo_level = 16; - Stochastic indicator parameter
------ RSI -------
lower = 40; - RSI indicator parameter
------- Bollinger Bands -------
bb_delta = 37; - Bands indicator parameter

The set parameter values are optimal for trading on the EUR/USD M15 pair.

The results in the strategy tester for September-November 2024 with different Risk level values are shown in the screenshots.

To see how the advisor trades, it is useful to run it in the strategy tester in visualization mode.

", "url": "https://www.mql5.com/es/market/product/26164", "small_icon": "https://c.mql5.com/31/211/gs-trend5-logo-60x60-4102.png", "middle_icon": "https://c.mql5.com/31/438/gs-trend5-logo-140x140-8033.png", "icon": "https://c.mql5.com/31/211/gs-trend5-logo-200x200-5985.png", "rating": 0, "price": 90, "published": 1509546296, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25658, "title": "Pm 42", "description": "

A comprehensive tool for determining the levels of support, resistance, reversals in relation to trading sessions. The indicator's thesis can be expressed as follows:

\"Support and resistance levels are undoubtedly formed by the psychological barriers of market participants, and influence the further behavior of the price. But these barriers are different for different groups of traders (One man's meat is another man's poison) and can be grouped by territory or by the trading time\".

Following the thesis, the indicator detects levels and processes data separately for three trading sessions: Asian (including Pacific), European and American.

The User Manual of the indicator is located on the discussion page.

The indicator contains the following subsystems, which can be used either independently or in any combination:

Period Marks: Candles of trading sessions - group and display the data of each trading session in the form of a Japanese candle. Candles can be used for pattern analysis or to visually identify the\r\nsignal source.
Price Marshes: Support and Resistance Levels - displays support/resistance levels in the form of a gradient field of horizontal lines, the color of which depends on the trading sessions in which this level occurred. The color density is directly related to the number of confirmations of this level. The periods of the level sources can be selected from the range \"M1\" to \" W1\".
Proximate Missions: Nearest targets - displays the value of the two nearest levels from the top and bottom to the right of the last bar. Levels are filtered by the current trading sessions (levels of inactive trading sessions are not displayed) from the Price Marshes data.
Periods Meters: Timers of trading sessions - displays the status of trading sessions and the time before their start/end.
Predator Mask - controls the display of sessions in the above tools, allowing you to view data only for selected (or excluding selected) trading sessions.

Inputs

The indicator uses the only input parameter Analysis depth (days). Other settings and mode changes are made via the screen interface of\r\nthe indicator.

Analysis depth (days) - depth of analysis in days.

Default settings (they will also be used in the tester): Autotracking\r\nis on; Candles, Marshes, Timers and\r\nTargets are on; Narrow mode; data source timeframe is equal to the chart timeframe.

\r\n\r\n
Trading sessions

The indicator uses the following parameters of trading sessions:

Trading session	Session time (GMT)	Color on the chart
Asian + Pacific	9.00 pm - 9.00 am	Green
European	6.00 am - 4.00 pm	Blue
American	12.00 am - 10.00 pm	Red

The offset of server time is determined automatically.

System messages

Time shift detecting ... - defines the offset of the server time.
[ Symbol ] [ Period ]: history loading ... - additional story is loaded when changing the indicator modes. If this message does not disappear within a reasonable time, reduce the value of the \"Analysis depth (days)\" input parameter.
Session candels for [Period] period are not provided - impossible to build candles on the selected period of the chart.
Untrusted price area! - prices are unknown: the price is near the boundaries of the analyzed range. Indications unreliable.

", "url": "https://www.mql5.com/es/market/product/25658", "small_icon": "https://c.mql5.com/31/207/pm-42-logo-60x60-7391.png", "middle_icon": "https://c.mql5.com/31/440/pm-42-logo-140x140-9846.png", "icon": "https://c.mql5.com/31/207/pm-42-logo-200x200-9260.png", "rating": 0, "price": 42, "published": 1509536996, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 26123, "title": "MACD candles bars or lines", "description": "

This is an ordinary MACD indicator displayed in the main window according to the selected chart style, i.e. Bars, Candlesticks or Line.

\r\n

When you switch the chart type, the indicator display also changes.

\r\n

Unfortunately I could not improve the chart type switching speed. After switching, there are delays before the arrival of a new tick.

\r\n

The indicator parameters

\r\n

Fast EMA period
Slow EMA period
Signal SMA period
Applied price

", "url": "https://www.mql5.com/es/market/product/26123", "small_icon": "https://c.mql5.com/31/211/macd-candles-bars-or-lines-logo-60x60-3223.png", "middle_icon": "https://c.mql5.com/31/446/macd-candles-bars-or-lines-logo-140x140-3869.png", "icon": "https://c.mql5.com/31/211/macd-candles-bars-or-lines-logo-200x200-9168.png", "rating": 5, "price": 0, "published": 1509461728, "popularity": 0.3888479342410452, "category": "Indicator", "votes": 1 }, { "id": 25905, "title": "DG DayInfo", "description": "

Purpose

\r\n

DG DayInfo is a free indicator that shows information about:

\r\n

Day's maximum prices;
Day's minimum prices;
Day's percentual variations;
Daily candle direction (Up, Down or Flat);
Candle timer;

\r\n

This way, DG DayInfo helps you to see day's maximum and minimum, check day's percentual variation and time left to close candle.

\r\n

Key features

\r\n

Designed to be simple to use, with a few parameters
Works in ALL pairs
Works within ALL time frames*

\r\n

Main Indicator Parameters

\r\n

Days - Set to how many days you want it to show (up to 15 days)
Color UP - Candle and info color when asset goes UP
Color DN - Candle and info color when asset goes DOWN
Color FLAT - Candle and info color if asset is FLAT
LineStyle - Line style to draw days maximum and minimum
Language - What language to print the day names
FontName - Font name
FontSize - Font size
ShowTimer - Show or hide candle timer

\r\n

Note: *Of course, daily information only works in time frames lesser than D1.

", "url": "https://www.mql5.com/es/market/product/25905", "small_icon": "https://c.mql5.com/31/210/dg-dayinfo-logo-60x60-4810.png", "middle_icon": "https://c.mql5.com/31/445/dg-dayinfo-logo-140x140-9877.png", "icon": "https://c.mql5.com/31/210/dg-dayinfo-logo-200x200-3368.png", "rating": 5, "price": 0, "published": 1509447146, "popularity": 0.3079187533014234, "category": "Indicator", "votes": 6 }, { "id": 26031, "title": "PZ Fibonacci MT5", "description": "

Are you tired of plotting Fibonacci retracements or extensions manually? This indicator displays Fibo retracements or extensions automatically, calculated from two different price points, without human intervention or manual object anchoring.

Easy to use
Manual anchoring is not needed
Perfect for price confluence studies
The indicator evaluates if retracements or extensions are needed
Once drawn, you can manually edit the Fibo anchors

The indicator adapts to your chart size and zoom:

Zoom out to get the big picture
Zoom in to dive into price action

Settings

Amplitude - amount of bars between alternative price points of the short term Fibo object
Behavior - indicator can draw two Fibo objects, just the latest one, or just the complete chart one
Drawing Settings - the block is self-explanatory

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/26031", "small_icon": "https://c.mql5.com/31/210/pz-fibonacci-mt5-logo-60x60-2553.png", "middle_icon": "https://c.mql5.com/31/445/pz-fibonacci-mt5-logo-140x140-4790.png", "icon": "https://c.mql5.com/31/210/pz-fibonacci-mt5-logo-200x200-1399.png", "rating": 4.5714287757873535, "price": 0, "published": 1508852530, "popularity": 0.6201283857782636, "category": "Indicator", "votes": 14 }, { "id": 25939, "title": "IlanisMT5", "description": "

Ilanis is an Expert Advisor for stock trading, it can be used for trading on Forex and other markets, including commodities, metals and index markets.

\r\n

To determine the market entry, the EA uses the modern and ultra-light adaptive indicator FourAverage.

\r\n

Principle of position maintaining is similar to that of the popular Forex robot Ilan, using averaging. But unlike Ilan, Ilanis uses an accurate entry into the market. The robot pays a lot of attention to position control, if the price goes in the expected direction. This is done by increasing the lot based on Martingale (ExpLot coefficient can be set in the settings, usually from 1.1 to 1.8).

\r\n

Trading is based on the idea that 80% of time the market is moving in a flat. Long trends can be dangerous for the Expert Advisor, but they are rare. Some extraordinary events, like war, economic collapse, etc., can cause such trends. Information about these events can be found on news sites. It is advisable to turn off the EA in such cases. If this fails, through a flexible system of money management the robot is able in most cases to bring the combined position (even those open against the trend) to profit, the amount of which may considerably exceed the initially planned one. Although risks are higher in this case.

\r\n

The main rule when working with Ilanis: do not be greedy, do not increase the lot, use the settings obtained after a proper optimization. Do not forget to optimize parameters for the current market from time to time.

\r\n

The free version of the Expert Advisor: https://www.mql5.com/en/market/product/25940;
Monitoring of the Ilanis Expert Advisor: https://www.mql5.com/en/signals/author/fastinvestments
Ilanis for MetaTrader4: https://www.mql5.com/en/market/product/16559

\r\n

Trading conditions

\r\n

Trading terminal: MetaTrader 5.
Accounts that support hedging.
Currency pair: Any pair.
Time frame: no restriction.

\r\n

Parameters

\r\n

Sets – override settings in ---=BUY SETTING=--- and ---=SELL SETTING=--- with the built-in presets.

\r\n

---=BUY SETTING=---

\r\n

BUY - Enables BUY.
PeriodFA1 - Calculation period of the FourAverage indicator (1-200).
Average1_1 - The first level of adaptive smoothing, a value of 0-300.

\r\n

---=SELL SETTING=---

\r\n

SELL - Enables SELL.
PeriodFA2 - Calculation period of the FourAverage indicator (1-200).
Average2_1 - The first level of adaptive smoothing, a value of 0-300.

\r\n

---=MONEY MANAGEMENT SETTING =---

\r\n

Lot - lot size of the first order. If the value is negative, it is used as a fixed lot (Example: Lot = -0.01 the trade will be opened with the size of 0.01 lot). If the value is positive, specify the volume per 1000 units of the deposit (Example: Lot = 0.04, deposit is $2000, the trade will be opened with the volume of 0.08 lot).
ExpLot - lot multiplier for the subsequent orders in a series.
Commission - your broker's commission for one lot.
StopLoss and TakeProfit - positive values: in points of the first order in a series. Negative values: in the deposit currency per 1 lot of the first order in the series.

\r\n

--------=FILTER=--------

\r\n

BlockOpenOldPrice - disable opening at a price better than the previous trade.
StopIlanis - disable opening new series, the current series will be continued.
StartHour - trading start time.
NotWorkingHours - hours to prohibit trading. Example: \"0, 1, 2, 3, 22, 23\".
NotWorkingDayWeek - days of the week to prohibit trading. Example with prohibition on Monday and Friday: \"1, 5\".

\r\n

---=ORDERS SETTING=---

\r\n

MaxSpread - if the current spread is greater than this value, the trade will not be opened.
MagicNumber_ - beginning of the range of magic numbers occupied by the Expert Advisor. The EA occupies 50 numbers.
Slippage - slippage accepted from expert.

", "url": "https://www.mql5.com/es/market/product/25939", "small_icon": "https://c.mql5.com/31/208/ilanismt5-logo-60x60-4042.png", "middle_icon": "https://c.mql5.com/31/438/ilanismt5-logo-140x140-8841.png", "icon": "https://c.mql5.com/31/208/ilanismt5-logo-200x200-1376.png", "rating": 3.857142925262451, "price": 30, "published": 1508852514, "popularity": 0, "category": "Expert", "votes": 7 }, { "id": 26025, "title": "SmartArrows", "description": "

For any trader, the result of market analysis is the correct identification of the market entry and exit points. The more correctly they are selected, the more profitable the trading. The SmartArrows indicator does not display any excessive information that may distract or confuse the trader, but only the mot important things. The indicator is very simple to use. When a down arrow appears, open a SELL trade, with an up arrow open BUY.

\r\n

Despite its seeming simplicity, the SmartArrows indicator contains a large analytical algorithm, which allows it to work as efficiently as possible.

\r\n

The indicator generates 2 types of signals - confirmed and unconfirmed. Confirmed signal (large white arrow) is a signal that corresponds to the global trend, unconfirmed signal (small arrow) is a signal that goes against the global trend. Each user can select the suitable trading mode - use all indicator signal, or only the ones that match the global trend.

\r\n

This indicator does not redraw, it generates signals on the current bar. If an arrow appears, it does not disappear regardless of the development of the market situation.

\r\n

Indicator Input Parameters

\r\n

period - sensitivity of the indicator (the higher the value, the fewer signals are obtained)
EnableAlerts - enable/disable generating audio alerts when a signal appears
EmailAlert - enable/disable sending email messages when a signal appears
MobileAlert - enable/disable sending push notifications when a signal appears
UseFilter - use the filter of signals based on correspondence to the global trend
MainFilterPeriod - global filter parameter (if UseFilter = true)
ExtraFilterPeriod - additional filter parameter (if UseFilter = true)

", "url": "https://www.mql5.com/es/market/product/26025", "small_icon": "https://c.mql5.com/31/209/smartarrows-logo-60x60-9197.png", "middle_icon": "https://c.mql5.com/31/441/smartarrows-logo-140x140-4278.png", "icon": "https://c.mql5.com/31/209/smartarrows-logo-200x200-6199.png", "rating": 5, "price": 69, "published": 1508837704, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 24111, "title": "FFF Forts", "description": "

FFF Forts is a fully automated trading robot designed to trade on futures on the Russian derivatives market FORTS (RTS, Sberbank, Gazprom, the Ruble, etc.).

\r\n

The robot trades only with the trend. Trade entry occurs on roll-backs. The size of the roll-back is determined manually (in points) or automatically based on the volatility of the instrument.

\r\n

Settings

\r\n

Type of trade - trade direction
Topping up on a trend - enable/disable adding a trend
Use Times Filters - enable/disable time limit for trade
Time Filter - setting block trade on the time and day of the week if you have enabled Use Time Filter. With this setup, you can define two time ranges and the days when the EA is allowed to trade
Setting for candles - set the average volatility for the calculation of the entry point, take profit and stop loss
Type - calculating the average volatility: daily, weekly or monthly
Placing order - enable/disable trade with pending orders
Volatility calculation type - select the method of the average volatility calculation (High-Low, Open-Close)
Number of days - Select the number of days involved in the calculation of volatility
Manual input of volatility (0-auto) - manual input volatility
Level of trend change, % - select percentage of average volatility. Once the price moves against the trend by a certain amount, the trade direction is changed
Order level, % - select percentage of average volatility. Once the price moves against the trend to a predetermined value, pending orders are set for the selected levels
Setting for 1-5 limit order - settings for five pending orders
1 level setting orders, % - select the first level for the pending order in % of the average volatility
Lot for 1 level - lot for the first pending order
SL for level 1,points - stop loss for the first pending order in points
SL for level 1, % Level - stop loss for the first pending order at % of the average volatility
SL for level 1, % Level+points - number of points that should be added to SL for level 1, % Level
SL for level 1,points+LastOrder - total stop loss for all orders
TP for level 1,points - take profit for the first pending order in points
TP for level 1, % Level - take profit for the first pending order at % of the average volatility
Type Candles for TP - calculation method of average volatility for take profit
TP for level 1, % Level+points - number of points that should be added to the TP for level 1, % Level
MA Settings - set the moving average
MA Period - MA period
MA Shift - MA shift
MA Method - MA calculation method
Price MA - MA price
Parameters BreakEven - set the breakeven
Use BreakEven - enable/disable breakeven
BE start, points - start breakeven in pips
BE start % - start breakeven is calculated in % of the average volatility
BE level points - value of an open order, by which a stop loss is moved
Parameters Trailing - trailing stop loss
Use Trailing - enable/disable trailing stop loss
Trailing Stop Level, points - how much the price should pass in points to activate trailing stop loss
Step trailing, points - step of the trailing stop loss in points
Trailing Stop Level, % - how much the price should go in % from average volatility to activate trailing stop loss
Step trailing, % - step of the trailing stop loss in % of the average volatility
Parameters Partial closure - set up partial close orders. You can specify up to five partial closures
Use Partial closure - on/off partial close
Type Candles for Closing - select the method to calculate the average volatility for the partial closure
Closing level 1, points - how many points the price should pass for the first partial closing of orders
Closing level 1, % - how many % of the average volatility the price should pass for the first partial closing of orders
Lot of closing 1 - volume closed at the first partial closing
Other settings - general settings
Max Spread - maximum spread
Number of attempts - number of attempts to open
Slippage - slippage
Magic Number - unique number
Comments - order comment
Color Levels - grid color

", "url": "https://www.mql5.com/es/market/product/24111", "small_icon": "https://c.mql5.com/31/188/fff-forts-logo-60x60-5610.png", "middle_icon": "https://c.mql5.com/31/445/fff-forts-logo-140x140-8392.png", "icon": "https://c.mql5.com/31/188/fff-forts-logo-200x200-2625.png", "rating": 0, "price": 50, "published": 1508250524, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25890, "title": "TSO Top Bottom Divergence MACD MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the MACD oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and MACD divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the MACD divergence indicator.
Fast Period: Set the fast period of the MACD oscillator.
Slow Period: Set the slow period of the MACD oscillator.
Signal Period: Set the signal period of the MACD oscillator.
Applied Price: The candlestick price to be used for MACD calculations.
Relationship between Double Top-Bottom and MACD Divergence:

Combined: All Double Top - Bottom signals are shown but only the MACD Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and MACD Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If MACD Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

MACD value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

MACD Signal value: Buffer = 7

", "url": "https://www.mql5.com/es/market/product/25890", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-60x60-9081.png", "middle_icon": "https://c.mql5.com/31/440/tso-top-bottom-divergence-macd-mt5-logo-140x140-1508.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-macd-logo-200x200-3884.png", "rating": 0, "price": 39, "published": 1508162393, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25893, "title": "TSO Top Bottom Divergence Momentum MT5", "description": "

This indicator combines double bottom and double top reversal chart patterns together with detection of divergences between the price chart and the Momentum oscillator.

\r\n

Features

\r\n

Easily detect strong reversal signals
Allows to use double top/bottom and Momentum divergence signals combined or independently
Get email and/or push notification alerts when a signal is detected
Custom colors can be used
The indicator is not repainting
Can easily be used in an EA (see below)

\r\n

Inputs

\r\n

ENABLE Double Top - Bottom: Enable the double top - bottom indicator.
ENABLE Show Double Top - Bottom Potential: Show Potential Double Top - Bottom before happens(repaint feature)
ENABLE Divergence: Enable the Momentum divergence indicator.
Period: Set the period of the Momentum oscillator.
Applied Price: The candlestick price to be used for Momentum calculations.
Relationship between Double Top-Bottom and Momentum Divergence:

Combined: All Double Top - Bottom signals are shown but only the Momentum Divergence Signals that correspond with Double Top - Bottom signals are shown. Both Double Top - Bottom and Momentum Divergence indicators should be enabled.
Independent: Each indicator presents their signals independently.

Number of Bars (Odd Number) [Affects only Divergence]: This is the number of bars that are required to detect a price high or low, including the top/bottom bar. For example, if set to 5, price HIGHs will be detected at bars which have a HIGH that is higher than the HIGH of the first two bars on their left and right. If Momentum Divergence is used independently, it uses this mechanism to detect highs and lows. Otherwise, highs and lows are detected through the Double Top/Bottom indicator.
Color Settings: Set the colors for the objects shown on the graph.
ENABLE Alert For Divergences: Get an alert when divergence is detected.
ENABLE Alert For Double Top - Bottom: Get an alert when double top/bottom is detected.
ENABLE Metatrader Alert: Get an alert on the MetaTrader platform.
ENABLE Email Alert: Get an alert to your email.
ENABLE Push Notification: Get a push notification on your mobile.

\r\n

For EA Developers

\r\n

Momentum value: Buffer = 0
Divergence Signal: Buffer = 1

Buy=0
Sell=1

First Bottom value: Buffer = 2
Second Bottom value: Buffer = 3
First Top value: Buffer = 4
Second Top value: Buffer = 5
Top/bottom Signal: Buffer = 6

Buy=0
Sell=1

", "url": "https://www.mql5.com/es/market/product/25893", "small_icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-60x60-8714.png", "middle_icon": "https://c.mql5.com/31/441/tso-top-bottom-divergence-momentum-mt5-logo-140x140-7494.png", "icon": "https://c.mql5.com/31/208/tso-top-bottom-divergence-momentum-mt5-logo-200x200-7984.png", "rating": 0, "price": 39, "published": 1508162383, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25858, "title": "AllClosedMT5", "description": "

The AllClosedMT5 utility in the form of an expert. The utility is designed for closing all open positions simultaneously based on the total profit (in the deposit currency) of all open positions.

\r\n

The utility can be attached to any chart with any trading instrument.

\r\n

Parameters

\r\n

Profit - the total positive profit in the deposit currency, at which all open positions are closed (profit).
Stop - the total negative profit in the deposit currency, at which all open positions are closed (loss). The value is specified as a positive number (the utility automatically converts it to negative). The default value is 0 - positions are not closed at a loss.

", "url": "https://www.mql5.com/es/market/product/25858", "small_icon": "https://c.mql5.com/31/207/allclosedmt5-logo-60x60-7923.png", "middle_icon": "https://c.mql5.com/31/440/allclosedmt5-logo-140x140-5507.png", "icon": "https://c.mql5.com/31/207/allclosedmt5-logo-200x200-4710.png", "rating": 0, "price": 0, "published": 1507906532, "popularity": 0.25552944435809255, "category": "Utility", "votes": 0 }, { "id": 25804, "title": "Jack of all Trades MT5", "description": "

Jack of all Trades MT5 is an Expert Advisor for trading high market moves. This is a fully automated EA optimized for multicurrency EURUSD, EURGBP, GBPUSD, USDCAD, USDJPY. The EA can be used on any timeframe because the indicators are locked to M10. The EA uses MACD(7,21,4), MOMENTUM(11) and candlestick history for last 10 candles on M10 for creating a signal. Because the EA is locked on M10, the trades will open on the same spot, it does not matter, on which timeframe it is tested. The EA also uses news events for creating a signal.

\r\n

Important: While the signals made by the indicators are fine, the ones made by news events require small ping (less than 30 ms), so for the best performances cloud server is recommended.

\r\n

Using Jack of all Trades MT5

\r\n

inp1_VolumeRisk: Buy Percentage - risked amount for buy trades in percent of the users balance. Default is 2.5%.
inp1_VolumeUpperLimit: Maximum lot for Buy trades. Default is 10 lot.
inp2_VolumeRisk: Sell Percentage - risked amount for sell trades in percent of the users balance. Default is 2.5%.
inp2_VolumeUpperLimit: Maximum lot for Sell trades. Default 10 lot.
inp3_maxSpread - maximum spread used to open trades. If the spread is above the set value, the EA will not trade. Default is 5 pips. NOTE: the value is in standard pips. It can be used on four and five digit brokers but the EA always uses the fourth digit 1.1384 (fourth decimal in price value). It can be also set as a five-digit spread filter by using decimals. Example: (2.5) 1.13845.

\r\n

Good luck and profitable trade to everyone!

", "url": "https://www.mql5.com/es/market/product/25804", "small_icon": "https://c.mql5.com/31/207/jack-of-all-trades-mt5-logo-60x60-9213.png", "middle_icon": "https://c.mql5.com/31/446/jack-of-all-trades-mt5-logo-140x140-4185.png", "icon": "https://c.mql5.com/31/207/jack-of-all-trades-mt5-logo-200x200-5389.png", "rating": 0, "price": 1500, "published": 1507728144, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25777, "title": "CME CallPut Option Ratio MT5", "description": "

Call/Put Ratio is one of the most well-known indicators of the market sentiment. The indicator has been developed by Martin Zweig. It is based on real volumes of the CBOE option market. As we know, a Call option gives its owner the right to buy the underlying asset at a predetermined price. A Put option gives the right to sell it. Thus, increasing volumes for Call options indicate the increasing demand. The growth of Put option volumes shows that supply starts exceeding demand. If we divide the volume of Call options by the total trading volume, we get a ratio showing the share of purchases relative to the total market share. It varies from 0 to 1 and is a high-frequency oscillator. The indicator allows us to use not only the volumes of option markets, but also the levels of their open interest as a calculation base enabling us to analyze the markets more deeply.

\r\n

The indicator shows three zones:

\r\n

Supply and demand are approximately equal (gray area);
Demand significantly exceeds supply (green area);
Supply significantly exceeds demand (red area).

\r\n

Any market is characterized by a frequent change of states: after a rapid growth, there is a period of active selling, and on the contrary, a strong selling may be followed by an inexplicable period of growth. Call Put Ratio identifies the change of these phases and shows you when you can open a long or short position. Buy when CallPut Ratio goes into the green zone, provided that it was in the red one a few bars ago. On the contrary, sell when the indicator has moved to the red zone from the green one. You can also follow the signal of the red signal line: buy when its fall is replaced by growth, and sell when its growth is replaced by fall.

\r\n

You can find more details about the indicator in the book \"Trading Against the Crowd: Profiting from Fear and Greed in Stock, Futures and Options Markets\" by John Summa.

\r\n

The data on the option volumes ratio are taken from one section of the \"daily bulletin\" - report of the CME, published weekly. This section is called Daily Volume, it is available as Excel files on the official ftp server of the exchange. To update the data on CallPut Ratio, simply copy the corresponding reports to the indicator folder. Detailed instructions on performing the update can be found in the blog How to update CME reports on your PC. The demonstration mode (during testing) does not require the data, the indicator loads them from its internal memory. However, updating the reports is not possible in the demo version, therefore, the CallPut Ratio is displayed with some delay in this mode. The indicator works on any timeframe, but the data are available only for the daily timeframe; therefore, the suggested working chart period is D1. Nevertheless, the volumes of the current trading day are always available. They are updated several times during the trading session.

\r\n

Inputs:

\r\n

Color Theme - select one of the indicator's three color schemes;
Type of CME Volume - one of the CME real volume types, including open interest;
Stundart Deviation - standard deviation ratio, beyond which the CallPut Ratio moves to the red or green area;
Period of Signal Line - averaging period of the moving average;
Auto Detect Report Name - true means the necessary reports are downloaded automatically. Otherwise, the reports specified in the following two parameters are downloaded instead;
Call Option Name - Call option name to be downloaded;
Put Option Name - Put option name to be downloaded.
Update Frequency Min - frequency of updating data from the file base. 0 - updates disabled, 1 - updates occur once a minute.

", "url": "https://www.mql5.com/es/market/product/25777", "small_icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-60x60-2860.png", "middle_icon": "https://c.mql5.com/31/447/cme-callput-option-ratio-mt5-logo-140x140-3910.png", "icon": "https://c.mql5.com/31/207/cme-daily-bullettin-callput-option-ratio-mt4-logo-200x200-5524.png", "rating": 5, "price": 30, "published": 1507642455, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25794, "title": "FFx Pivot SR Suite Pro MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/25793

\r\n

FFx Pivot SR Suite PRO is a complete suite for support and resistance levels. Support and Resistance are the most used levels in all kinds of trading.

\r\n

Can be used to find reversal trend, to set targets and stop, etc.

\r\n

The indicator is fully flexible directly from the chart

\r\n

4 periods to choose for the calculation: 4Hours, Daily, Weekly and Monthly
4 formulas to choose for the calculation: Classic, Camarilla, Fibonacci and Woodies
Options to choose your own price OHLC for a custom calculation
Alert selectable for each level separately
Each level can be hidden
Levels can be set to display multiple periods in history (great for studying past trading setups)
Panel can be moved (drag and drop) anywhere on the chart
Show or hide the levels table
Show or hide the levels lines

\r\n

User Inputs

\r\n

Panel ID - number for each instance applied on the same chart
History Back Period - set here the number of periods in history to draw the SR lines
Show Lines Text - set here if you want the name and price to be shown with each level
Lines Text Shift - set here the shift of the lines text from the current candle
Lines Style - select here the style for the lines (solid, dot, etc.)
Lines Width - set here the width for the lines
Levels Colors - set here the colors for each levels
Fibo Levels - set here the Fibo % for the Fibo SR calculation
Alert at Candle close - select here to enable the alert at candle close
Sound Alert - select here to enable the sound alert
Sound File - set here the sound file name
Popup Alert - select here to enable the popup alert
Email Alert - select here to enable the email alert
Push Alert - select here to enable the push notification

", "url": "https://www.mql5.com/es/market/product/25794", "small_icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-60x60-4429.png", "middle_icon": "https://c.mql5.com/31/446/ffx-pivot-sr-suite-pro-mt5-logo-140x140-6311.png", "icon": "https://c.mql5.com/31/207/ffx-pivot-sr-suite-pro-mt5-logo-200x200-7721.png", "rating": 0, "price": 3030, "published": 1507624521, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25682, "title": "Virtual Orders Charting Demo", "description": "

Note: Demo version only works on NZDJPY and USDRUB

\r\n\r\n

\r\n

What does it do?

\r\n

It assists you in your trading and has some important jobs to perform:

\r\n

It sets virtual pending orders, stop loss and take profit.
It can set real stop loss and take profit if desired.
It makes trading independent of bid-ask line concept, thus useful for very short term traders and price action traders.
Orders can be opened, managed and closed with 1 click providing fastest management.
It can automatically set your position sizing based on your risk inputs.
Graphical panel enables inserting new inputs in few seconds.

\r\n\r\n

\r\n

What it does not do?

\r\n

These are also future features that are to be added

\r\n

It does not set real pending orders, thus order is executed through your computer (EA).
It cannot be used for backtest in strategy tester.
It does not automatically move the lines/levels.

\r\n\r\n

\r\n

Instructions

\r\n

These are the main inputs of the EA:

\r\n

\r\n
RiskType: Can be either in fixed lots or you can have a fixed money risk. Can also be a in terms of percentage of account balance for risk controllers.
\r\n
- FixedLots
- FixedMoney
- Percentage
\r\n
Risk: If risk type is set to fixed lots then enter lot number, if it is fixed money then type the risk in money while percentage risk needs to be written the percentage number.
StopLoss: Initial stop loss when virtual order is placed on chart.
TakeProfit: Initial take profit when virtual order is placed on chart.
Set real SL/TP after trade open: If true then after trade is opened, EA will automatically set real stop loss and take profit. This is a useful feature if you need to record your analytics through 3rd party software or if need to close the platform.
Include fees: If set true then spread and commission is calculated and position size is reduced such that when trade is closed you will lose the absolute value you risked.
Broker commission Round Turn: Each broker has different Round Turn commission, ask broker for these details. Set Zero if there is no commission.

\r\n

You can also change line colors, width and style but initial ones are set to match real orders characteristics. There is a small button at middle top of the chart, you need to press it so that graphical panel can open, press it again and it will close.

\r\n

If you press on buy and click on chart, EA will place your order at that location. Same goes for sell order. EA uses market orders to open orders i.e when price will cross the order level by 1 point then the order shall be executed, same goes for stop loss and take profit.

\r\n

Also, EA does not care about bid-ask line. When EA closes the order on stop loss or take profit, it will only care about what the actual price of market is, bid price is ignored and only ask line is considered.

\r\n

Fee structure can be calculated if set true, spread and commissions will however reduce the position size so that you only lose the absolute value you risked. If your account has commissions then ask your broker for round turn commission for 1 Lot and enter that value in the input.

\r\n

EA can also set real take profit and stop loss after order is opened so that if you shut down the platform or need to record your statistics through a 3rd party software, it can be done. Option can be disabled if not need. Take profit also shows what is your risk:reward ratio so that you can keep track of risk management.

\r\n

An important passive function is that you can double click the line and fix your levels. If you fix your stop loss at a certain price level and your risk is set to a certain amount or percentage, then no matter where you place your entry order, your risk will remain the same as EA will automatically size your position.

\r\n

Please note: When order is opened, do not take stop loss line above/below price level. If you place a sell order and it is opened by EA, then do not take stop loss below price, otherwise EA will close that order regardless of whether it hit the level or not. Same goes for take profit, do not take it above (in case of sell order) or below (in case of buy order), otherwise EA will close that order.

\r\n

Feedback and suggestions are welcomed, EA will keep updating in the future so stay tuned!

\r\n

", "url": "https://www.mql5.com/es/market/product/25682", "small_icon": "https://c.mql5.com/31/205/virtual-orders-charting-demo-logo-60x60-8652.png", "middle_icon": "https://c.mql5.com/31/438/virtual-orders-charting-demo-logo-140x140-1696.png", "icon": "https://c.mql5.com/31/205/virtual-orders-charting-demo-logo-200x200-9251.png", "rating": 0, "price": 0, "published": 1507112912, "popularity": 0.05639151572865913, "category": "Utility", "votes": 0 }, { "id": 25170, "title": "Virtual Orders Charting", "description": "

What does it do?

\r\n

It assists you in your trading and has some important jobs to perform:

\r\n

It sets virtual pending orders, stop loss and take profit.
It can set real stop loss and take profit if desired.
It makes trading independent of bid-ask line concept, thus useful for very short term traders and price action traders.
Orders can be opened, managed and closed with 1 click providing fastest management.
It can automatically set your position sizing based on your risk inputs.
Graphical panel enables inserting new inputs in few seconds.

\r\n\r\n

\r\n

What it does not do?

\r\n

These are also future features that are to be added

\r\n

It does not set real pending orders, thus order is executed through your computer (EA).
It cannot be used for backtest in strategy tester.
It does not automatically move the lines/levels.

\r\n\r\n

\r\n

Instructions

\r\n

These are the main inputs of the EA:

\r\n

\r\n
RiskType: Can be either in fixed lots or you can have a fixed money risk. Can also be a in terms of percentage of account balance for risk controllers.
\r\n
- FixedLots
- FixedMoney
- Percentage
\r\n
Risk: If risk type is set to fixed lots then enter lot number, if it is fixed money then type the risk in money while percentage risk needs to be written the percentage number.
StopLoss: Initial stop loss when virtual order is placed on chart.
TakeProfit: Initial take profit when virtual order is placed on chart.
Set real SL/TP after trade open: If true then after trade is opened, EA will automatically set real stop loss and take profit. This is a useful feature if you need to record your analytics through 3rd party software or if need to close the platform.
Include fees: If set true then spread and commission is calculated and position size is reduced such that when trade is closed you will lose the absolute value you risked.
Broker commission Round Turn: Each broker has different Round Turn commission, ask broker for these details. Set Zero if there is no commission.

\r\n

Feedback and suggestions are welcomed, EA will keep updating in the future so stay tuned!

\r\n

", "url": "https://www.mql5.com/es/market/product/25170", "small_icon": "https://c.mql5.com/31/202/mt5-virtual-orders-charting-logo-60x60-3411.png", "middle_icon": "https://c.mql5.com/31/445/virtual-orders-charting-logo-140x140-8954.png", "icon": "https://c.mql5.com/31/202/mt5-virtual-orders-charting-logo-200x200-7496.png", "rating": 0, "price": 199, "published": 1507112908, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 25707, "title": "MonsterDash Harmonic Indicator MT5", "description": "

MonsterDash Harmonics Indicator is a harmonic pattern dashboard. It recognizes all major patterns. MonsterDash is a dashboard that displays all detected patterns for all symbols and (almost) all timeframes in sortable and scrollable format. Users can add their own user defined patterns. MonsterDash can open and update charts with the pattern found.

\r\n

Settings

\r\n

MonsterDash's default settings are good enough most of the time. Feel free to fine tune them to your needs. The color settings are for those who 'gone to the dark side' (black backgrounds), they are less suitable for white backgrounds.

\r\n

Check pattern every - Set to the frequency to detect and refresh the patterns. This is independent of the chart timeframe.
Symbols to exclude - This is a comma delimited list of symbols to exclude from pattern recognition. MonsterDash looks at all symbols in the Market Watch window.
Minimum AccuracyPercent - Minimum accuracy percentage for pattern recognition.
Price Must Touch All Minimum Ratios - Set to true to force MonsterDash to touch all minimum ratios, set this if you want the price to touch all minimum ratios and provide even better patterns.
Show Pattern Projections - Show/hide projected patterns.
Check M1, M5, M15, M30, H1, H4, D1, W1, MN1 - Set to true to include the timeframe in the harmonic pattern recognition.
Offline timeframes, comma separated - Set to a comma separated list of all offline timeframes (e.g. 2,3). Useful for Renko of Median charts
Show Command Column - Set to true to show an column with a button to open a chart.
Chart Template - Set to the name of the template (include '.tpl') to apply to the chart to open.
Show Alerts - Set to false to disable all alerts.
Show Screen Alerts - Set to true to show screen alerts.
Email Alerts - Set to true to email alerts.
Push Alert Notifications - Set to true to push alerts.
Show 'PatternName' Patterns - Show/hide specific pattern.
Sort Patterns By - Column to sort the information grid to (one of: NoSort, Pattern, Symbol, Timeframe, Direction, Accuracy, Age, Completion, IsProjected).
Sort Direction - Ascending of Descending.
monospacedFont - Pick your favorite font, monospaced is best.
fontSize - Font size.
Show Pattern Label - Set to true to show the pattern name on opened charts.
Show Pattern Accuracy - Set to true to show the pattern accuracy label on opened charts.
Show Initialization User Patterns? - set to true to show the results of the intialization of the user patterns in the Experts tab.
Color Palette - Pick Color Palette for 'Dark' or 'Light' Backgrounds.
Colo(u)rs - You know what to do.
Zigzag parameters - set ZigZag parameters.

\r\n

User Patterns

\r\n

Users can add their own patterns to MonsterDash. Just modify the Monster_UserPatterns.csv to include your patterns. The .csv file can be found in the files folder of the User Data Directory. A sample pattern is already included in the file.

\r\n

Offline Charts

\r\n

MonsterDash will read and detect offline charts. Renko or Median charts among others can be used this way. However, offline charts cannot be automatically opened through MonsterDash to show the pattern found, this is a limitation of MetaTrader 4.

\r\n

Sorting, Scrolling, Opening Charts

\r\n

The patterns can be sorted on all columns. Click the column headers to sort the grid to the information in the column, click again to reverse the sort. The grid containing all patterns can be scrolled using a standard scrollbar. Clicking the button in the last column of the grid will open or update a chart containing the pattern found.

\r\n

Full Description

\r\n

Read this blog post for more information on MonsterDash.

", "url": "https://www.mql5.com/es/market/product/25707", "small_icon": "https://c.mql5.com/31/205/monsterdash-harmonic-indicator-mt5-logo-60x60-8140.png", "middle_icon": "https://c.mql5.com/31/445/monsterdash-harmonic-indicator-mt5-logo-140x140-4974.png", "icon": "https://c.mql5.com/31/205/monsterdash-harmonic-indicator-mt5-logo-200x200-6899.png", "rating": 3, "price": 169, "published": 1507040614, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 25581, "title": "Currency Index Watcher", "description": "

Currency Index Watcher is a simple and user-friendly tool for whoever wish to trade Forex using currencies indexes.

\r\n

Currency Index Watcher is configurable and usable directly from the panel.

\r\n\r\n\r\n

Indexes of 8 custom currencies

\r\n\r\n

\r\n\r\n\r\n

EUR, USD, GBP, JPY, CHF, AUD, CAD, NZD (default)
Any 3-chars symbol from your market watch could be used (BTC = bitcoin, RUB = ruble, CNH = yuan etc ...) : double click the \r\n symbol label
Ability to select which currencies and made-of pairs will be analyzed : check/uncheck wanted symbols in the \r\n calculation
Graphics : there's 2 types of graphics you'll meet there ...

\r\n Selected currencies compared as an histogram:gives an overview of the whole forex market - automatically updated \r\n according to selected currencies
\r\n Specific currencies's historical data over the chosen period:click on the value to display this graphic, by analyzing \r\n the index of the currencies thru time it's possible to make yourself a better opinion on what's upcoming

\r\n

\r\n\r\n\r\n

Currencies Pairs

\r\n\r\n

Selection of opportunities is made according to the following selection criteria:

\r\n\r\n\r\n

\r\n Minimal threshold:minimal difference in points of indexes' variation, the higher it is the more accurate is the signal.
\r\n Search among all currencies or only opened chart
\r\n Period: (W)eeks/(D)ays/(H)ours/(M)inutes, default is set to 24h.
\r\n MA (moving average's period):0=off, to use prices' from a moving average and take benefit from smoothing rather than standard \r\n prices.

\r\n

Heat zone & signals :

\r\n

\r\n\r\n\r\n

\r\n Add in the heat zone :default is set to 5 - when a pair reaches that level of strength (whatever it is bullish or bearish), it is \r\n signaled as being trending
\r\n Remove from the heat zone :default is set to 3 - when a pair falls below that level of strength (whatever it is bullish or bearish), it \r\n is signaled as not being trending anymore
\r\n Clear journal : will clear the journal

\r\n

Currencies pairs are listed according to a color-code (Green/Red) based on the \"heat zone\" values defined by the user :

\r\n

\r\n\r\n\r\n

\r\n Dark color = strong trend
\r\n Normal color = trending
\r\n Light = insignificantly trending

\r\n

Scope : default is set to 5

\r\n

\r\n\r\n\r\n

\r\n The scope is a \"multitimeframe zoom\", a unique feature developed for CIW, since last update values it displays \r\n aren't \r\n no longer strengths, but forces
\r\n A concrete example being more talkative : \"EURUSD, 24h, Scope 5\", it will show EURUSD force on :

the whole last 24 h : strong bull
the last 19 h : bull
the last 14 h : bull
the last 9 h : bear
the last 4 h : strong bear

\r\n\r\n\r\n

\r\n You'll find more examples on the \"Comments tab\".\r\n

\r\n

With such a deep analysis it's possible to \r\neasily anticipate any upcoming consolidation/breakout etc ...

\r\n\r\n\r\n

Customization & friendliness

\r\n\r\n

\r\n\r\n\r\n

Default settings : any change made to CIW is registered, this button will reset the indicator to its default settings
Beep to notify : enable/disable sound notification

\r\n

Currency Index Watcher is timeframe independent and needs to be applied on one only chart but an interval of \r\n>=24h is recommended to rely on this strategy.

\r\n

", "url": "https://www.mql5.com/es/market/product/25581", "small_icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-60x60-3021.png", "middle_icon": "https://c.mql5.com/31/439/currency-index-watcher-logo-140x140-1830.png", "icon": "https://c.mql5.com/31/204/currency-index-watcher-logo-200x200-8320.png", "rating": 0, "price": 0, "published": 1507035758, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25666, "title": "Level Alert", "description": "

If you are using horizontal levels, trend lines or equidistant channels, then this indicator will help you. You do not have to watch charts all the time. Just draw channels and lines and when the price will come close to it, the alert will notify you. You can use as many horizontal levels, trend lines, equidistant channels as you need. There is an option to alert only certain levels on the chart.

\r\n

The indicator is really easy to use. It has a switch button to turn it on and off any time. For better performance, first you need to draw all of the lines and only then to turn the alert on with the button.

\r\n

Parameters

\r\n

Distance from a level when alert goes off - when difference between the current price and the level is less than this parameter, the alert goes off.
Distance from a level when alert resets – after the alert went off, it will be reset when the difference between the current price and the level is greater than this parameter.
Work only when object's name ends with _alert – alert only of certain levels. Just add “_alert” to the object’s name.
Sends push notifications to the mobile terminals – send push notifications to the mobile terminals, whose MetaQuotes IDs are specified in the Notifications tab.

", "url": "https://www.mql5.com/es/market/product/25666", "small_icon": "https://c.mql5.com/31/205/level-alert-logo-60x60-2367.png", "middle_icon": "https://c.mql5.com/31/440/level-alert-logo-140x140-7733.png", "icon": "https://c.mql5.com/31/205/level-alert-logo-200x200-8203.png", "rating": 0, "price": 30, "published": 1506694331, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25598, "title": "Smart Grid MT5", "description": "

Smart Grid MT5 automatically recognizes any symbol, period and scale of the chart and marks it up accordingly. It is possible to mark up the chart by trading sessions. The grid consists of the two main line types.

\r\n\r\n

\r\n

Vertical lines

\r\n

There are two visualization methods:

\r\n

Standard - the lines are divided into three types, separating:

\r\n

Small time period.
Medium time period.
Large time period.

\r\n

Trading Session - the lines are divided into groups (a total of ten). Each group has two lines: the first is responsible for the opening of the trading session, the second for the closing.

\r\n\r\n

\r\n

Horizontal lines

\r\n

They are divided into two types, separating:

\r\n

Medium price period.
Large price period.

\r\n

Division value depends on the chart period and scale.

\r\n\r\n

\r\n

Description of some time periods

\r\n

5 minutes: \r\n
- Small time period divides the chart into segments of 4 hours each, and any candle on H4 chart corresponds with a certain segment on M5 chart.
- Medium time period divides the chart by days.
- Large time period divides the chart by weeks.
\r\n
1 hour: \r\n
- Small time period is absent.
- Medium time period divides the chart by days.
- Large time period divides the chart by weeks. This division allows you to quickly see the end of the past and the beginning of the next week on H1 chart making it easy to determine the day of the week in any part of the chart.
\r\n
4 hours:\r\n
- Small time period is absent.
- Medium time period divides the chart by weeks.
- Large time period divides the chart by months.
\r\n

\r\n

The grid supports all time periods, including non-standard ones.

\r\n\r\n

\r\n

Some input parameter features

\r\n

Method of visualization - select the visualization method.
'Trading Session' method will work during this period and less - added to forcibly disable the visualization method on the higher time periods. If this method is selected and the time period changes for a larger one or a compression occurs, then the visualization will be performed using the \"Standard\" method. It should also be noted that compressed charts are regarded by the grid as having a higher timeframe, for example, compressed M15 is H1, M5 is M30, etc.
The general color of the grid - set color for the entire grid. You can change the color of the lines belonging to a certain type only if the parameter is set to NONE.
Set hotkey for these settings (a, B, c, ..., or 0, 1, 2, ...) - create a \"hot key\" for the current configuration. This significantly facilitates changing the grid representation between the \"Standard\" and \"Trading Session\" methods or between their variations.
I will use the time in GMT (auto switch to the local time) - shift the set time for the trade session lines relative to GMT.

\r\n\r\n

\r\n

Notes

\r\n

When attempting to modify parameters of a previously attached \"indicator\" with a non-empty \"hot key\" value, the changes might not take place. For the changes to take effect, press the corresponding \"hot key\".

\r\n

Suitable keys are \"A\" through \"Z\" or \"0\" through \"9\", except for \"R\" (Refresh).

\r\n

The \"hot keys\" of the indicator do not conflict with the \"hot key\" combinations of the terminal.

\r\n

The \"hot keys\" work on any chart of the terminal, where the \"indicator\" is running with a non-empty \"hotkey\" value.

\r\n

To disable the \"hot keys\" feature, clear the corresponding edit box. It will be disabled only on the current chart.

\r\n\r\n

\r\n

Important

\r\n

The \"Trading Session\" method does not take holidays into account. Therefore, the lines may be shifted, not displayed or displayed incorrectly during such periods.

\r\n

Tooltips are not displayed in testing: hovering the mouse over a line shows its original name instead of the tooltip.

\r\n

To increase usability, the horizontal lines do not separate an explicitly set range (which causes excessive compression/stretching of these lines among themselves during periods of high/low volatility), but rather a dynamically selected one, which takes a number of factors into account. Also, the price range will always be smoothed and have the form - 10, 20, 50, 100, 200, 500, 1000 points, etc.

\r\n

Version for Meta Trader 4: Smart Grid.

", "url": "https://www.mql5.com/es/market/product/25598", "small_icon": "https://c.mql5.com/31/205/smart-grid-mt5-logo-60x60-4758.png", "middle_icon": "https://c.mql5.com/31/441/smart-grid-mt5-logo-140x140-2677.png", "icon": "https://c.mql5.com/31/205/smart-grid-mt5-logo-200x200-5335.png", "rating": 5, "price": 0, "published": 1506679373, "popularity": 0.9848892146838931, "category": "Indicator", "votes": 5 }, { "id": 25664, "title": "TSO Total Negative Management MT5", "description": "

The TSO Total Negative Management EA contains an adaptive negative management system that can prevent losing trades and even account collapse in almost any market condition.

\r\n

Adapts to adverse market conditions and switches to the correct negative management strategy for any situation.
TSO Signal Builder, TSO Order Recovery and TSO Loss Management are included and can be used in combination or individually.
Apply negative management to any strategy (manual or automated).
No pending orders placed.
Any account size - $1,000+ is recommended.
Works on any currency pair.
Lots of customization (a default strategy is included for demonstration purposes).
For detailed explanations for all the features check the Quick Start Guide.

\r\n

Combined Negative Management

\r\n

Two methods of negative management are combined, each with a very different approach. This way, negative management can adapt to situations where it faces adverse conditions and avoid an account collapse.

\r\n

The Loss Management system can eliminate losses when the market is trending favorably or moving sideways.
The Order Recovery system excels in situations where there is a clear strong trend, regardless of direction.

\r\n

TSO Signal Builder

\r\n

The TSO Signal Builder EA offers a library of 29 indicators as well as advanced position management, allowing to build an almost infinite amount of strategies.

\r\n

TSO Order Recovery

\r\n

The TSO Order Recovery system relies on hedging to cover losses, targeting to exit the market once a significant trend appears in any direction.

\r\n

It detects a losing trade and opens an opposite position of larger lot size at a fixed distance from the original trade creating a zone within which the loss is confined. This creates two scenarios:

\r\n

If the price reaches the target, the second position will cover the losses of the initial trade and even profit. All positions are then closed with a net profit.
If the price reaches the level of the initial trade an additional position is opened so that the total lots will now be more in the original order’s direction, so that the new position together with the initial one will cover the losses of the second trade and even profit if the price reaches the opposite target. All positions are then closed with a net profit.

\r\n

This process continues and new positions are opened each time the price reverses direction and passes from the edges of the zone, until one of the targets is reached.

\r\n

TSO Loss Management

\r\n

On the other hand, the TSO Loss Management system focuses on reinforcing the losing order, targeting on a small favorable trend, or even a sideways market movement to exit the market without net losses.

\r\n

Loss Management system strategy:

\r\n

A trade loses enough to activate the Loss Management system.
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance.
Meanwhile, the Swings mechanism uses small price movements to capture profit from sideways market.
All positions are closed when their net loss, including the profits captured from swings, is zero (0) or a requested profit target has been reached.

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this expert advisor can result in open trades that last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA.

\r\n

Key Inputs

\r\n

Check the Quick Start Guide for a detailed list.

\r\n

Basic inputs are the same as in TSO Signal Builder, TSO Order Recovery and TSO Loss Management. Additional inputs are displayed below:

\r\n

ENABLE Combined Order Recovery: If enabled, negative management is switched from the Loss Management to the Order Recovery system when the open loss reaches a percentage of balance.
- Dynamic: The open loss percentage is based on the current balance.
- Static: The open loss percentage is based on the initial balance.
- Disable.
\r\n
(Open Loss)%_of_Balance for Order Recovery Activation: The percentage value of the open loss to make the switch.

", "url": "https://www.mql5.com/es/market/product/25664", "small_icon": "https://c.mql5.com/31/205/tso-total-negative-management-mt5-logo-60x60-2625.png", "middle_icon": "https://c.mql5.com/31/442/tso-total-negative-management-mt5-logo-140x140-1331.png", "icon": "https://c.mql5.com/31/205/tso-total-negative-management-mt5-logo-200x200-1607.png", "rating": 0, "price": 499, "published": 1506615422, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25663, "title": "TSO Loss Management MT5", "description": "

TSO Loss Management is an Expert Advisor that incorporates advanced mechanics to eliminate losses from losing trades.

\r\n

Adapts to diverse market conditions and micromanages each position to cover losses as fast as possible and with minimum risk
It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies
Add negative management to any strategy (manual or automated) to eliminate losing trades
No pending orders placed
Any account size - $1,000+ is recommended
Allows for a lot of customization (a default strategy included for demonstration purposes)

\r\n

Operation

\r\n

A trade loses enough to activate the Loss Management system
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance
Meanwhile, the Swings mechanism uses small swinging price movements to capture profit from sideways market
All positions are closed when their net loss, including the profits captured from swings, is zero (0) or a requested profit target has been reached

\r\n

If the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. However, this Expert Advisor can result in open trades that last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA

\r\n

Inputs specific to the Loss Management system

\r\n

Check the Quick Start Guide for detailed explanations.

\r\n

ENABLE Loss Management System
Distance to Activate Loss Management (pips)
Distance Between Loss Management Orders (pips)
ENABLE Dynamic Distances\r\n
- Simple: the lot size is adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐
- Smart: orders will be opened at the lines of support / resistance
- Disable
\r\n
Order after which Dynamic Distances Start [ONLY FOR EQUATION]
𝑎,𝑏,𝑐 [ONLY FOR EQUATION]
Select no of Bars (Odd Number) [ONLY FOR SMART]: Sets the number of candles required to determine the lines of support / resistance
ENABLE Dynamic Lot Size: Lot size adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
Number Of Orders Per Lot Size
𝑎,𝑏,𝑐
Lot Size Stabilizer (lots) [0 = Disable]: lot size at which the lots will remain constant
ENABLE Averaging
Averaging Target Profit (pips): The net profit to be gained after all orders are closed through averaging
ENABLE Swings: The Swings mechanism sets a profit target for each position opened through the Loss Management system and closes each position once the target has been reached
Order At Which Swings Start
Swings Target Profit (pips) [0 = Disable]
ENABLE Swings Profit Adjustment [ONLY FOR DYNAMIC DISTANCES]: This mechanism adjusts the size of the Swings target profit (above input) so that it remains proportional to the distance between positions
ENABLE Swing Trailing Stop: A trailing stop for each Loss Management position that follows the swing mechanism
Swing Trailing Stop Activation Level (pips)
Swing Trailing Stop Distance (pips)
Secure Ratio (0 = Disable) [ONLY IF SWINGS ENABLED]: The ratio between (Swings Captured Profit) / (Open Loss) at which the Loss Management cycle will be closed
(Open Loss) %_of_Balance for Secure Ratio Activation: The open loss as a percentage of current balance at which the Secure Ratio mechanism is activated
ENABLE Economy Mode 1: This mechanism uses the profit captured through swings in order to close open positions starting from the initial position and continuing through the positions opened through the Loss Management system, in the sequence they were opened
ENABLE Economy Mode 2: This mechanism closes the most profitable positions and the most losing position once the open profit of the former is equal to the open loss of the latter. This results in less open positions
(Open Loss) %_of_Balance for Economy Mode Activation
Balance Mode\r\n
- Static: Use the initial balance.
- Dynamic: Use the current balance
\r\n
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Management system

", "url": "https://www.mql5.com/es/market/product/25663", "small_icon": "https://c.mql5.com/31/205/tso-loss-management-mt5-logo-60x60-3368.png", "middle_icon": "https://c.mql5.com/31/439/tso-loss-management-mt5-logo-140x140-7711.png", "icon": "https://c.mql5.com/31/205/tso-loss-management-mt5-logo-200x200-3815.png", "rating": 0, "price": 249, "published": 1506615418, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25662, "title": "TSO Loss Management Lite MT5", "description": "

TSO Loss Management Lite contains all the features of TSO Loss Management except from the Swings mechanism and the other mechanisms based on Swings.

\r\n

Adapts to diverse market conditions and micromanages each trade opened so that the loses are covered as fast as possible but also with minimum risk.
It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies.
Add negative management to any strategy (manual or automated) to eliminate losing trades.
No pending orders are placed.
Risk Management setting allows for any account size - a minimum of $1,000 is recommended.
Works on any currency pair.
Allows for a lot of customization (a default strategy is included for demonstration purposes).

\r\n

Example

\r\n

A trade loses enough to activate the Loss Management system.
The System starts opening multiple positions in the direction of the initial position on the levels of support and resistance.
All positions are closed when their net loss is zero (0) or a requested profit target has been reached.

\r\n

For detailed explanations all the features of this expert advisor check the Quick Start Guide.

If for any reason the EA is shut down unexpectedly it can be restarted as long as the Expert Properties have not been changed. Then it will continue normally, taking into account the previous orders it created. This feature has been added only to cover for unexpected circumstances. This expert advisor can result in open trades that can last from hours to weeks and it requires to be open throughout that period. It is possible to run from a PC if it can be constantly open and online but using a VPS is highly recommended.

\r\n

Keep us updated to keep you updated

\r\n

We intend to keep updating our products based on your input - give us your feedback in the comments section.

\r\n

Inputs specific to the Loss Management system

\r\n

Check the Quick Start Guide for detailed explanations.

\r\n

Input Mode

Custom: The EA runs based on the parameters input by the user
Default: The EA ignores all inputs and follows the default parameters that are recommended
Manual Trades: The EA ignores all inputs and a manual trading panel appears

ENABLE Loss Management System
Distance to Activate Loss Management (pips)
Distance Between Loss Management Orders (pips)
ENABLE Dynamic Distances\r\n
- Simple: the lot size is adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
- Smart: orders will be opened at the lines of support / resistance.
- Disable.
\r\n
Order after which Dynamic Distances Start [ONLY FOR EQUATION].
𝑎,𝑏,𝑐 [ONLY FOR EQUATION].
Select no of Bars (Odd Number) [ONLY FOR SMART]: Sets the number of candles required to determine the lines of support / resistance. E.g \"5\" would mean a bar that has a higher HIGH / lower LOW than the two bars before and the two bars after it, creating a peak/trough.
ENABLE Dynamic Lot Size: Lot size adjusted based on the equation 𝑋(𝑛)=𝑎∗𝑋(𝑛−1)^𝑏+𝑐.
Number Of Orders Per Lot Size: The number of orders opened at each change of the lot size.
𝑎,𝑏,𝑐
Lot Size Stabilizer (lots) [0 = Disable]: lot size at which the lots will remain constant.
ENABLE Averaging
Averaging Target Profit (pips): The net profit to be gained after all orders are closed through averaging.
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Management system.
Entry Signal Settings: The indicator(s) selected in this section will determine the entry strategy followed. It is possible to enable more than one indicators for entry.
ENABLE Exit Signals

Disable: Exit will be based on Basic Order Management (i.e. TP, SL etc.)
Auto: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and wait for the next entry signal.
Reverse: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and at the same time open a new opposite position.
Custom: Only in this case the exit will be based on the indicators and the parameters set in the Exit Signal Settings section. If more than one indicators are enabled, then all indicators must return a signal within the same bar for the EA to close that position.

ENABLE Manual Panel: A panel for manual trades appears.

", "url": "https://www.mql5.com/es/market/product/25662", "small_icon": "https://c.mql5.com/31/214/tso-loss-management-lite-mt5-logo-60x60-3759.png", "middle_icon": "https://c.mql5.com/31/442/tso-loss-management-lite-mt5-logo-140x140-4047.png", "icon": "https://c.mql5.com/31/214/tso-loss-management-lite-mt5-logo-200x200-6515.png", "rating": 0, "price": 175, "published": 1506615414, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25660, "title": "TSO Order Recovery MT5", "description": "

TSO Order Recovery is an expert advisor that provides a known and tested method of covering losses from open positions through hedging.

\r\n

It uses all the tools of the TSO Signal Builder EA - almost infinite entry/exit strategies
Add negative management to any strategy (manual or automated) to eliminate losing trades
No pending orders are placed
Any account size - a minimum of $1,000 is recommended
Works on any currency pair
Allows for a lot of customization (a default strategy is included for demonstration purposes)

\r\n

Strategy

\r\n

The Order Recovery system detects a losing trade and opens an opposite position of larger lot size at a fixed distance from the original trade creating a zone within which the loss is confined. This creates two scenarios:

\r\n

If the price reaches the target, the second position will cover the losses of the initial trade or even profit. All positions are then closed with a net profit.
If the price reaches the level of the initial trade an additional position is opened so that there are more lots in total in the original position’s direction, so that the new position together with the initial one will cover the losses of the opposite position and even profit if the price reaches the opposite target. All positions are then closed with a net profit.

\r\n

This process continues and new positions are opened each time the price reverses direction and passes from the edges of the zone, until one of the targets is reached.

\r\n

For Detailed explanations of all the features of the expert advisor check the Quick Start Guide.

\r\n

Keep us updated to keep you updated

\r\n

Give us your feedback in the comments section to improve this EA.

\r\n

Inputs specific to the Order Recovery system

\r\n

(check the Quick Start Guide for detailed explanations)

\r\n

ENABLE Order Recovery
Order Recovery Zone Distance: Distance in pips between the initial and reverse order in pips. It applies for all subsequent orders.
Order Recovery Target Distance: The target pips from the edge of the zone at which the net loss of all open positions is 0. A smaller distance implies a faster exit but is more aggressive as it requires a larger lot size and vice versa.
ENABLE Custom Lots: If this option is disabled, the lot size of the orders opened from the Order Recovery system is based on the selected zone and target distances. If this option is enabled the lots will be determined through the equation 𝑋𝑛=𝑎∗𝑋𝑛−1𝑏+𝑐.
𝑎,b,c: Affect the lot size similar to the dynamic lot size for the initial orders. Used only if Custom Lots are enabled.
ENABLE Safety: If the market does not make a relatively strong price movement, the order recovery mechanism could create multiple open positions, potentially leading to loss of the whole account balance available. This mechanism targets at reducing potential losses.

Close All Positions: All open positions will be closed and the current order recovery cycle will end once a pre-set open loss has been reached.
Reduce Positions: Once a pre-set open loss has been reached, the system will stop opening new positions at the zone edges but the last position will be closed once the opposite edge is reached.
Disable

Open Loss Units:

Percentage: Measure the open loss in the following input as a percentage of the current balance.
Money: Measure the open loss in the following input as money.

Open Loss to Enable Safety: The open loss in percentage of current balance or money (based on above input) at which the Safety mechanism is enabled.
Custom Indicator Settings: Custom automated strategies can be added as entry signals through indicators. The losing orders are then managed through the Loss Managment system
ENABLE Manual Panel: A panel for manual trades appears.
ENABLE Comments:

Account balance
Current profit
Current lots
Max lots
Max drawdown %
Spread

", "url": "https://www.mql5.com/es/market/product/25660", "small_icon": "https://c.mql5.com/31/205/tso-order-recovery-mt5-logo-60x60-5990.png", "middle_icon": "https://c.mql5.com/31/438/tso-order-recovery-mt5-logo-140x140-1397.png", "icon": "https://c.mql5.com/31/205/tso-order-recovery-mt5-logo-200x200-4089.png", "rating": 0, "price": 125, "published": 1506615411, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25659, "title": "TSO Signal Builder MT5", "description": "

TSO Signal Builder MT5 is a MetaTrader 5 Expert Advisor that provides a solid platform to quickly build test and develop automated trading strategies based on indicator signals.

\r\n

Contains 29 indicators, including trend and volume indicators, oscillators as well as many indicators described by Bill Williams.
Basic as well as advanced order management features.
All indicators are configurable and can be combined to create strategies with different entry and exit signals as well as reverse orders.

\r\n

Made for Traders of any Level

\r\n

Every trader can benefit from this expert advisor, from a novice trader learning how to develop a trading strategy to the advanced trader wishing to test complex trading strategies with multiple parameters.

\r\n

Keep us updated to keep you updated

\r\n

We intend to keep updating our products based on your input - give us your feedback in the comments section.

\r\n

Key Inputs

\r\n

(For detailed explanations of all the features of the expert advisor check the Quick Start Guide.)

\r\n

Input Mode

Custom: The EA runs based on the parameters input by the user
Default: The EA ignores all inputs and follows the default parameters that are recommended.
Manual Trades: The EA ignores all inputs and a manual trading panel appears.

Static Balance: The initial balance available.
Stop Loss & Take Profit Units: Pips/Percentage
Stop Loss Value [0 = Disable]
Take Profit Value [0 = Disable]
ENABLE Trailing Stop
Trailing Stop Activation Level
Trailing Stop Distance
ENABLE Parabolic Trailing Stop: A trailing stop based on the parabolic SAR indicator.
Time Filter: The time periods when the EA should not open new positions.
ENABLE Time Stop (Number of Bars) [0 = Disable]: The number of bars at which the initial trade will be closed, irrespective of profit or loss.
Percentage Static Balance to Stop: The net profit at which the EA will stop working.
Initial Lot Size: The lot size of positions opened. It increases if Dynamic Lot Size is enabled (following input). Otherwise, it remains constant for all trades.
ENABLE Dynamic Lot Size:

Equation: The lot size is adjusted based on the equation 𝑋𝑛=𝑎∗𝑋𝑛−1𝑏+𝑐, where 𝑋𝑛 is the lot size for the position to be opened and 𝑋𝑛−1 is the lot size of the last position opened. The lot size remains constant (𝑋𝑛=𝑋𝑛−1) for 𝑎=1,𝑏=1,𝑐=0
Risk Management: The lot size of the initial order is adjusted so that a pre-set percentage of the current balance is always risked based on the stop loss set for the order. A stop loss value must be set for this mechanism to work. This allows for a more dynamic lot size adjustment that increases or decreases proportional to the current balance.
Adjustable: Lot size is set to hold the proportionality ratio of the initial lot size relative to the initial balance.
Disable

Percentage of Risk [ONLY FOR RISK MANAGEMENT]: The percentage of current balance that will be risked if the Risk Management mechanism has been selected.
Adjust Lot Size At Every Balance Change of [ONLY FOR EQUATION]: The amount by which the balance has to increase or decrease for the lot size to be increased or decreased respectively.
𝑎,b,c [ONLY FOR EQUATION]: Parameters for the Dynamic Lot Size Equation.
Entry Signal Settings: The indicator(s) selected in this section will determine the entry strategy followed. It is possible to enable more than one indicators for entry.
ENABLE Exit Signals

Disable: Exit will be based on Basic Order Management (i.e. TP, SL etc.)
Auto: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and wait for the next entry signal.
Reverse: Once all indicators return a signal opposite to the currently open position within the same bar, the EA will close that position and at the same time open a new opposite position.
Custom: Only in this case the exit will be based on the indicators and the parameters set in the Exit Signal Settings section. If more than one indicators are enabled, then all indicators must return a signal within the same bar for the EA to close that position.

ENABLE Manual Panel: A panel for manual trades appears.

", "url": "https://www.mql5.com/es/market/product/25659", "small_icon": "https://c.mql5.com/31/205/tso-signal-builder-mt5-logo-60x60-4340.png", "middle_icon": "https://c.mql5.com/31/440/tso-signal-builder-mt5-logo-140x140-5988.png", "icon": "https://c.mql5.com/31/205/tso-signal-builder-mt5-logo-200x200-4554.png", "rating": 0, "price": 49, "published": 1506615407, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 24880, "title": "Impro Martin", "description": "

This Impro Martin is an enhanced Expert Advisor (EA) based on Martingale’s strategy. Instead of using a clear admittance signal, it uses random admittance , and deals with the subsequent orders according to the status of the first order. It had in-depth optimization of risk management and lots dispose to reduce transaction risk. At the same time, this product also has the functions of Trailing Stop Loss (the gained profit is protected from any lost, so as to maintain the growth of profit) and Fixed Stop Loss (the stop value allowed by each order).

\r\n

Use suggestion

\r\n

This EA is ideal for cross currency pairs, such as AUDCHF、AUDNZD. For different currency pairs, the values of the parameter StepDist differ. Such as EURUSD, GBPUSD would have larger StepDist values due to their larger point values.
The advantage of this EA is to fluctuate trading, so there is a very unilateral market trend is very strong, may not be easy to use; You have two options: or stop to wait for the opportunity, either set the TrailStart value and the TrailStep value to a relatively small value.
Although EAs can work on their own, they still need to be taken care of. Occasionally you need to observe the results, probably once every three days, which is not too frequent.

\r\n

Parameters

\r\n

StepDist - Step between the current price and the price of the pending order.
FirstLot - FirstLot (position + pending orders = 0).
IncLot - IncLot (position + pending orders > 0).
TrailStart - Start trailing points(Profit>0,if TralStart+TralStep>0,TralStart is the profits of get ).
TrailStep - Trail-length step in points.（Mobile profit）
StopLoss_ - Trailing Stop-loss in points.
SL - Fixed stop-loss.
Deviation_ - Max. Price deviation in points.

", "url": "https://www.mql5.com/es/market/product/24880", "small_icon": "https://c.mql5.com/31/197/impro-martin-logo-60x60-6902.png", "middle_icon": "https://c.mql5.com/31/439/impro-martin-logo-140x140-3119.png", "icon": "https://c.mql5.com/31/197/impro-martin-logo-200x200-9562.png", "rating": 0, "price": 199, "published": 1506597512, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 23715, "title": "DG TrendSigns", "description": "

Purpose

\r\n

DG Trend+Signs is an indicator that paints candles with trend colors and clearly shows consolidations, using both DoGMA Trend and DoGMA Channel indicators.

\r\n

It was created to help users in their trades, showing trends, consolidations and marking entry and exit points. The indicator also takes consolidations in consideration to identify breakouts.

\r\n

Key features

\r\n

Designed to be simple to use, with a few parameters
Does NOT repaint
Does NOT recalculate
Signals on entries
Works in ALL pairs
Works in ALL timeframes
Many kinds of alerts

\r\n

Main Indicator Parameters and How to Use Them:

\r\n

Signal Sensibility - The sensibility of the of the price change detection (the greater, the less sensible)

\r\n

Use this parameter to tune the sensibility of the DoGMA signal, that means how much price variations are needed to be considered relevant. Similar to the MACD signal, however, it is more sensible.

\r\n

If you using low timeframes (from M1 to M15), for daytrading, use a low integer number (from 3 to 20, e.g.). If you want to make swing or position trades use greater values (above 21, e.g.). Remember to set this parameter lower than Trend Sensibility to achieve better results.

\r\n
\r\n
Trend Sensibility - The sensibility of the trend detection (the greater, the less sensible)
\r\n
\r\n\r\n

This parameter is used to identify trends, it's the main value for the coloring candles feature. As the previous parameter, if you using low timeframe (from M1 to M15), for daytrading, use a low integer number (from 19 to 36, e.g.). If you want to make swing or position trades, analyze greater timeframes (H1, D1) and use greater values (above 144, e.g.).

\r\n
\r\n
Congestion Sensibility - Channel breakout sensibility (the greater, the less sensible)
\r\n
\r\n\r\n

The indicator tunes its sensibility to long periods of consolidations through this parameter. Usually, if you are doing daytrades, use it low (e.g., between 8 and 24), to longer trades, use values from 14 to 36.

\r\n
\r\n
Sigma Sensibility - Amplitude variation of DoGMA Channel
\r\n
\r\n\r\n

Sigma is an advanced parameter and it is related to the variation speed of the DoGMA channel. The greater, the less sensible. We recommend a value between 1.6 and 2.4. If you are beginning to use DG TrendSigns, use the default value (2.1).

\r\n

Minimum Tick variation Sensibility - Minimum tick variation to be considered as a meaningful price movement.

\r\n

Mininum number of ticks of which the price should go before consider it a breakout or a meaningful price movement. Use it carefully, and adjust it to each asset and stock market, since it's linked to the price values itself. If you new to DG TrendSigns or don't know how to use it yet, please set it to 1 or accept the default value.

\r\n

Price to be considered - The price to be used by the indicator in its calculations
Do not paint candles on weak trends/consolidations - Should the indicator paint grayish candles when the trend is weak?

\r\n

Arrow shift - The vertical shift of signal arrow
Bars analyzed - The number of bars to be analyzed
Alerts - Set your preferred alerts

\r\n

Example Settings

\r\n

EURUSD - M1 to M15 charts - Daytrading

\r\n

Signal Sensibility 5
Trend Sensibility 74
Min Tick var 2
Consolidation Sensibility 38
DoGMA Channel Sigma 1.8

\r\n

EURUSD - H1 to D1 charts - Swing trading

\r\n

Signal Sensibility 14
Trend Sensibility 144
Min Tick var 10
Consolidation Sensibility 36
DoGMA Channel Sigma 2.1

\r\n

EURUSD - H1 to W1 charts - Position trading

\r\n

Signal Sensibility 16
Trend Sensibility 310
Min Tick var 14
Consolidation Sensibility 34
DoGMA Channel Sigma 2.1

\r\n

Notes

\r\n

This indicator is a manual trading tool that can be used in many ways. It's up to you to find the best setting to fit your purposes.

\r\n

DoGMA Trend is a copyrighted method that uses combined zero lag averages algorithms to identify a trend, DoGMA Channel is a new approach to calculate a dynamic channel, sensible to consolidations, minimum variations, and quick price spins.

", "url": "https://www.mql5.com/es/market/product/23715", "small_icon": "https://c.mql5.com/31/184/dg-trendsigns-v2-logo-60x60-9129.png", "middle_icon": "https://c.mql5.com/31/445/dg-trendsigns-logo-140x140-5774.png", "icon": "https://c.mql5.com/31/184/dg-trendsigns-v2-logo-200x200-8503.png", "rating": 2, "price": 89.99, "published": 1506516691, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 25630, "title": "Alpha Trend MT5", "description": "

Alpha Trend MT5 is a trend indicator for the MetaTrader 5 platform; it has been developed by a group of professional traders.

The Alpha Trend MT5 indicator finds the most probable tendency reversal points, which allows making trades at the very beginning of a trend.

This indicator features notifications, which are generated whenever a new signal appears (alert, email, push-notification). This allows you to open a position in a timely manner.

Alpha Trend does not redraw, which makes it possible to evaluate its efficiency on history.

Alpha Trend for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24560

Advantages of the indicator

Suitable for scalping and intraday trading.
Simple and easy indicator configuration.
Works on all timeframes.
It can be used in any financial markets: FOREX, CFD, binary options, stocks.
It can be used as a stand-alone tool or in conjunction with other indicators.

Recommended symbols

EURUSD, GBPUSD, AUDUSD, EURCHF, AUDNZD.

Recommendations on usage

Buy signal: the indicator arrow is directed upwards.

Sell signal: the indicator arrow is directed downwards.

Parameters

Period - the main parameter, responsible for the indicator calculation period.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email - enable/disable sending e-mails. If true - enabled, false - disabled.
Push - enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.

", "url": "https://www.mql5.com/es/market/product/25630", "small_icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-60x60-3346.png", "middle_icon": "https://c.mql5.com/31/445/alpha-trend-mt5-logo-140x140-3048.png", "icon": "https://c.mql5.com/31/205/alpha-trend-mt5-logo-200x200-7149.png", "rating": 0, "price": 35.9, "published": 1506442578, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25475, "title": "PZ Wedges MT5", "description": "

Este indicador encuentra cuñas , que son patrones de continuación identificados por líneas de tendencia convergentes que rodean un período de consolidación de precios. Señala intercambios utilizando una ruptura de donchian junto con la ruptura de formación.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Fácil de usar
Colores y tamaños personalizables.
Implementa señales de arranque
Implementa alertas de todo tipo.

Uso óptimo

Para ver cuñas de todos los tamaños, que pueden superponerse, cargue el indicador varias veces en el gráfico con diferentes tamaños, por ejemplo 6, 12, 18 y 24.

Parámetros de entrada

Tamaño: Tamaño de los patrones que se encontrarán, expresados como barras entre puntos alternativos.
Período de ruptura: período Donchian para señalar los intercambios
Max. Barras de historial: cantidad de barras pasadas para examinar en el gráfico
Color de patrones alcistas: este parámetro se explica por sí mismo
Color de patrones bajistas: este parámetro se explica por sí mismo
Color de patrones ininterrumpidos: este parámetro se explica por sí mismo
Ancho de línea: tamaño de las líneas del patrón
Color de los brotes alcistas: este es el color para las flechas de compra
Color de los brotes bajistas: este es el color para las flechas de venta
Tamaño de flecha: este es el tamaño de las flechas que se muestran en el gráfico
Nombre de alerta personalizada: título personalizado para las alertas generadas en este gráfico
Mostrar alertas: habilite o deshabilite las alertas de pantalla
Alertas de correo electrónico: habilite o deshabilite las alertas de correo.
Alertas de inserción: active o desactive las alertas de inserción.
Alertas de sonido: active o desactive las alertas de sonido.
Archivo de sonido: archivo de sonido para reproducir cuando se eleva una alerta de pantalla.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/25475", "small_icon": "https://c.mql5.com/31/204/pz-wedges-mt5-logo-60x60-1211.png", "middle_icon": "https://c.mql5.com/31/446/pz-wedges-mt5-logo-140x140-3263.png", "icon": "https://c.mql5.com/31/204/pz-wedges-mt5-logo-200x200-4563.png", "rating": 0, "price": 75, "published": 1506357562, "popularity": 0.6995271710377544, "category": "Indicator", "votes": 0 }, { "id": 25433, "title": "Splash MT5", "description": "

The indicator identifies the most suitable moment for entering the market in terms of market volatility, when the market has the strength to move (the signal is indicated by an arrow under the candle).

For each of the signals, the presence of trends on the current and higher timeframes is determined, so that the signal is in the direction of the majority of positions opened on the market (denoted near the signal by abbreviations of timeframes with a trend present).

The signal appears after the candle is closed.

To set the Take Profit level or to exit at the market price, the indicator determines 3 targets (\"ONE\", \"TWO\", \"THREE\" labels on the chart). By default. these are the Fibonacci levels: 1.618, 2.618, 4.236; custom values can be specified in the setting.

Stop Loss can be set near the arrow or at your discretion (remember that the tighter the stop loss, the more often it triggers).

Splash can be used as a standalone trading system, as well as in conjunction with other methods, indicators, systems.
The indicator can be used on any timeframe, on the stock, commodity and currency markets;
It can be used for long-term, medium-term and short-term trading.

Settings

History_Size - the amount of history for calculation.
Period_Candle - calculation period for signal search.
Mult_RS - volatility ratio.
Type_Arrows - type of arrows.
Target - display the targets.
Target_ONE - the first target value.
Target_TWO - the second target value.
Target_THREE - the third target value.
Target_Up - color of up target labels.
Target_Down - color of down target labels.
Trend - display the trend labels.
MA_Period - period of the moving average for determining trends.
MA_type - type of the moving average for determining trends.
MA_price - price type used in calculation of the moving average.
Trend_Text_Up - color of the trend labels for up signals.
Trend_Text_Down - color of the trend labels for down signals.
Trend_Text_FONTSIZE - font size of the trend labels.
VHT - display the trend labels vertically / horizontally / diagonally.
Send_Mail - email notification.
Send_Notification - notification to mobile terminal.
Send_Alert - standard terminal alert.

", "url": "https://www.mql5.com/es/market/product/25433", "small_icon": "https://c.mql5.com/31/202/splash-mt5-logo-60x60-2761.png", "middle_icon": "https://c.mql5.com/31/447/splash-mt5-logo-140x140-7258.png", "icon": "https://c.mql5.com/31/202/splash-mt5-logo-200x200-3799.png", "rating": 0, "price": 199, "published": 1506353582, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25472, "title": "Trend Cruiser GT for CADCHF", "description": "

The Trend CruiserGT (for CAD/CHF)

\r\n

It is a swing trading system that trades on CAD/CHF currency pair on 4-hrly chart.
The EA is custom designed to take advantage of the start of rising Canadian dollar in 2017, after seeing over 7 year period of downtrend against the Swiss Franc (CHF).
The design of the EA have taken consideration of fundamental analysis over last several quarters for the CAD and CHF counterparts, and analyzing the multi-year chart pattern of this pair.
The strategy will take full advantage of the rising strength of the CAD/CHF that is expected to last through 2020.

\r\n

HOW IT WORKS

\r\n

Trend CruiserGT trades only the buys (long-only trades) and scans for the uptrend movement using a series of Bollinger Bands for entry and exits.
The strength of the EA is the simplicity. It trades on 4-hourly chart and the trades can last for 1 to 3 days on average. It places 3 high probability trades per month.
The author has built and developed the strategy using 10/20/30 Rule™ he has created. He has written trading books on this quantitative technique which are available on Amazon.
The 10/20/30 Rule is a powerful technique to build trading strategies that produce winning results. The coding of the Trend CruiserGT is created by Dennis Nikolopoulos who has many years experience in developing and testing systems that are bug free and error prone.

\r\n

WHAT IS THE STRENGTH

\r\n

This is a risk-averse strategy which means that the strategy has relatively low drawdown to protect the clients' capital from highly volatile period.
The strategy is also tuned to produce nice returns with lower risk which is crucial but extremely rare to find. Also, the strategy has been tested and verified with robust backtesting and forward testing using the author's unique 10/20/30 Rule and have the edge of many systems out there.

\r\n

RECOMMENDATION

\r\n

This is not scalping, so the EA will work very well with all regulated forex brokers.
This is a plug & play system, so no new parameters setting will be needed. It is better to let the system run with default settings for optimum performance.

\r\n

MONEY MANAGEMENT

\r\n

There are 3 levels; Conservative, Smart and Aggressive, of money management rules for different types of traders.
Default is at \"Smart\" for people who are focused to keep very low drawdown and maximize gain.
Aggressive setting has still maintain a relatively low drawdown, and have a more growth potential.

\r\n

PARAMETER SETTINGS

\r\n

The system has been optimized to run best with the default parameter settings and users are not required to change them.
Money management selection is recommended to be selected per the user's risk preference.
The strategy places the stop-loss level according to price action and there is a universal stop loss (percentage) that is set to 4% to protect against flash crash or sudden drop in price for whatever reason.
There are 3 Bollinger Band settings which are optimized and doesn't need to change.

\r\n

Parameters

\r\n

Maximum number of Orders. Set to 3 (default). This is to have the maximum trade orders opened at any time.
Stop-Loss (Percentage). All orders have stop-loss. This is an extra layer of stop-loss for sudden price drop on rare events. Set at 4% of the open price.
Money Management Rules. 3 settings according to risk appetite: Conservative (3% risk), Smart (4.4%) and Aggressive (5.8%)
Bollinger Band Blue. 20p, 1.9dev settings for Entry order and Stop-loss trigger - no changes required
Bollinger Band Green. 18p, 2.8dev settings for Take-profit setting - no changes required
Bollinger Band Red. 22p, 2.3dev, shift -2 settings for Take-profit setting. Green and Red Bollinger Band must intersect to set take-profit- no changes required
RSI Strategy Period = 28 - period interval for RSI calculation - no changes required
RSI Strategy Level = 36 - trigger level - no changes required
Enable Panel - True is visible, False is green panel on screen is removed
Enable Rule 1 - True (optimized take profit level)
Enable Rule 2 SL - True enable optimized Stop-loss rule

", "url": "https://www.mql5.com/es/market/product/25472", "small_icon": "https://c.mql5.com/31/203/trend-cruiser-gt-for-cadchf-logo-60x60-8695.png", "middle_icon": "https://c.mql5.com/31/441/trend-cruiser-gt-for-cadchf-logo-140x140-6054.png", "icon": "https://c.mql5.com/31/203/trend-cruiser-gt-for-cadchf-logo-200x200-3856.png", "rating": 0, "price": 255, "published": 1506345767, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25284, "title": "ZoomIN MT5", "description": "

The ZoomIN MT5 indicator is designed for quickly viewing the selected bar on the smaller timeframes in a pop-up window.

\r\n

Once launched, the indicator works in the background, does not take up space on the chart and does not consume system resources. When the indicator is activated by the Shift + i combination (can be changed in the settings), a pop-up window with a chart of a smaller timeframe is created. The displayed timeframe can be changed by a left-click on the magnifying glass icon.

\r\n

To hide the pop-up window, simply click the left mouse button on any free space on the chart.

\r\n

The indicator is easy to use and does not require any settings.

", "url": "https://www.mql5.com/es/market/product/25284", "small_icon": "https://c.mql5.com/31/201/zoomin-mt5-logo-60x60-5930.png", "middle_icon": "https://c.mql5.com/31/446/zoomin-mt5-logo-140x140-9506.png", "icon": "https://c.mql5.com/31/201/zoomin-mt5-logo-200x200-4108.png", "rating": 0, "price": 0, "published": 1505996948, "popularity": 0.1666659872603011, "category": "Utility", "votes": 0 }, { "id": 24210, "title": "Master Stochastic", "description": "

How it works?

This EA trades with Stochastic signal and base line crossovers.
Only allows one open trade at a time on the currency you have attached this EA.
Opens a Buy position if the signal line crosses below base line below the value you set in BuyBelow parameter.
Opens a Sell position if the signal line crosses above base line above the value you set in SellAbove parameter.

This EA will work in any time frame and in any pair, Stochastic oscillator will base its data on the current time frame you have attached to the EA.

Closing of Trade is Take Profit, Stop Loss, Trailing Stopand Close on Reverse crossover.

Money Management is martingale. If you want to deactivate martingale, just put the value 1 in the martingale loss factor parameter.

Parameters

MagicNumber - return an identifying (magic) number of the currently selected order.
~~~~~Lot and Risk Management~~~~~
Lot Size - initial start lot of martingale to trade.
Martingale Loss Factor - multiplier value of lots if the last trade is a loss.
Maximum Lot size - if martingale is use and calculated lot size is more than the maximum lot size set, it will be adjusted to this input.
Martingale Restart Losses - value you set to restart lot size after consecutive losses.
SL pips - set a Stop Loss limit relative to the opening price.
TP pips - set a Take Profit limit relative to the opening price.
Close on Reverse crossover - Close open trade on reverse crossover.
Max Spread Pips - distance between Ask and Bid, at which you allow the EA to open a trade.
Max Slippage Pips - slippage, at which you allow the EA to execute an order.
~~~~~Use Trailing stop~~~~~ - if set to true trailing stop will be activated.
Trail Stop - The distance of where he stop loss will be set from the current price
Trail Step - The distance where stop loss is moved in steps of a small number of pips.
Trail Above Breakeven - if set to false trail will adjust below break even, if true will only trail when calculated stop loss is above breakeven.
~~~~~Stochastic Filter Settings~~~~~
Reverse Logic - if set to true, it will reverse the condition of opening and closing of order type.
%K - %K value.
%D - %D value.
Slowing - Slowing value.
Stoch Method - Moving Average method. It can be any of enumeration values.
Applied Price - Low/High or Close/Close.
Indicator Bar Value - The Option to choose between current Current Bar Value and Closed Bar Value when the crossover happen.
Buybelowlevel - level of base line on previous bar you only allow the EA to open a a buy position on a crossover between signal line and base line.
SellAbovelevel - level of base line on previous bar you only allow the EA to open a a Sell position on a crossover between signal line and base line.
~~~~~Time and Day Filter Settings~~~~~ - For Opening of Trades Only.
Daily Start Time - Starts to open a trade.
Daily Stop Time - Ends to stop opening a trade.
TradeSunday - allow the EA to trade on Sunday.
TradeMonday - allow the EA to trade on Monday.
TradeTuesday - allow the EA to trade on Tuesday.
TradeWednesday - allow the EA to trade on Wednesday.
TradeThursday - allow the EA to trade on Thursday.
TradeFriday - allow the EA to trade on Friday.
TradeSaturday - allow the EA to trade on Saturday.
~~~~~Other Settings~~~~~
Filling Mode - When sending an order, you can specify the filling policy for the volume set in the order. Change this input if your journal says unsupported Filling Mode

For more questions and suggestions, email me at geniebulltrader@gmail.com or private message me here at MQL5.

Thank you!

", "url": "https://www.mql5.com/es/market/product/24210", "small_icon": "https://c.mql5.com/31/203/master-stochastic-logo-60x60-8534.png", "middle_icon": "https://c.mql5.com/31/439/master-stochastic-logo-140x140-7418.png", "icon": "https://c.mql5.com/31/203/master-stochastic-logo-200x200-1139.png", "rating": 4, "price": 50, "published": 1505840958, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 25040, "title": "AIS Probabilistic Price Levels MT5", "description": "

This script allows selecting the TakeProfit and StopLoss levels. It analyzes the history data, and then calculates the probability of reaching a given price level.

\r\n\r\n\r\n

\r\n

How the script works

\r\n

Suppose you have a trading strategy and you want to select the TakeProfit and StopLoss levels. Run the script and set the parameter:

\r\n

Number of Bars - the average position holding time in bars.

\r\n

Once the script operation is complete, the AIS-PPL.csv file will be created in the Files folder in the terminal data catalog. The PCT column shows the probability (in percents) of price deviation from the entry points by the umber of points indicated in the LVL column.

\r\n

When selecting the TakeProfit and StopLoss levels, it is necessary to strive to fulfill the following conditions:

\r\n

PCT_tp >= PCT_sl
PCT_tp * LVL_tp >= PCT_sl * LVL_sl.

\r\n

Assuming V = PCT_tp / (PCT_tp + PCT_sl), the most optimal case is when the equation V * (V * LVL_tp - (1 - V) * LVL_sl) tends to a maximum.

\r\n

These optimal values are displayed in the Alert box once the script operation is complete.

", "url": "https://www.mql5.com/es/market/product/25040", "small_icon": "https://c.mql5.com/31/203/ais-probabilistic-price-levels-mt5-logo-60x60-9896.png", "middle_icon": "https://c.mql5.com/31/439/ais-probabilistic-price-levels-mt5-logo-140x140-3314.png", "icon": "https://c.mql5.com/31/203/ais-probabilistic-price-levels-mt5-logo-200x200-1850.png", "rating": 0, "price": 0, "published": 1505833947, "popularity": 0.011105970014057855, "category": "Utility", "votes": 0 }, { "id": 25352, "title": "Pivot Point MT5 Indicator by PipTick", "description": "

The Pivot Point indicator automatically calculates and displays the pivot point line and support and resistance levels. Pivot can be calculated according to the Classic, Floor, Fibonacci, Woodie, Camarilla or DeMark formula. It is also possible to select the period for calculating the indicator. A trader can choose from daily, weekly, monthly, or user-defined periods.

Types of pivots

Classic
Floor
Fibonacci
Woodie
Camarilla
DeMark

Main features

The indicator shows the current and historical pivot point level
Pivot support and resistance levels
Alert notifications for indicator lines
Custom session time
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN)
The indicator is non-repainting
Ready for backtesting
Customizable parameters (Colors, Line thickness, Visibility...)
High-speed calculation
Available for MT4 and MT5

Please visit the Pivot Point indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/es/market/product/25352", "small_icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-60x60-9050.png", "middle_icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-140x140-8856.png", "icon": "https://c.mql5.com/31/771/pivot-point-mt5-indicator-by-piptick-logo-200x200-7884.png", "rating": 4.090909004211426, "price": 0, "published": 1505497625, "popularity": 3.078089768602952, "category": "Indicator", "votes": 11 }, { "id": 25256, "title": "HandyThing", "description": "

Helper utility that does the following important actions:

\r\n

Shows or hides various groups of symbols - Forex, CFD, Futurex, Bonds and all others.
Shows or hides symbols that have or do not have trade restrictions.
Shows or hides symbols that currently have a trading/quoting session active.
Shows or hides symbols that contain the specified words in their names.
Closes or deleted all market or pending orders.
Closes orders by type - Buy/Sell.
Clears stop loss and take profit values.
Downloads history from the broker's server to the terminal starting from the specified date.
Writes important information on the selected symbols to a CSV file - useful for visual evaluation of the data.

\r\n

The existing functionality will be expanded. All suggestions are welcome and will be considered.

", "url": "https://www.mql5.com/es/market/product/25256", "small_icon": "https://c.mql5.com/31/202/handything-logo-60x60-6409.png", "middle_icon": "https://c.mql5.com/31/440/handything-logo-140x140-7814.png", "icon": "https://c.mql5.com/31/202/handything-logo-200x200-3932.png", "rating": 0, "price": 0, "published": 1505480451, "popularity": 0.052772483610952166, "category": "Utility", "votes": 0 }, { "id": 25232, "title": "Spadim Order Beep Email Notification", "description": "

This indicator sends a message (notification), an email, and plays a custom sound when a Limit (Buy/Sell) or Limit Stop (Buy/Sell) or Take Profit, Stop Loss, Stop Out is executed.

\r\n

A user can change the sound file name, and select if they receive notifications/emails.

\r\n

It runs as an indicator, and only one indicator is locked (used) by a user account/login.

\r\n

Parameters

\r\n

soundFile - sound file
Save your file at the terminal folder, for example: \"C:\\Program Files\\MetaTrader 5\\Sounds\\Order Executed.wav\".
From: https://www.mql5.com/en/docs/common/playsound
\"The file must be located in terminal_directory\\Sounds or its sub-directory. Only WAV files are played.\"
sendEmail - send an email
sendNotification - send a notification (mobile)
outputPrint - print to console
writeToFile - output transactions (verbose) and trades (non verbose) to a file, or do not use the file (TXT file saved at the Common folder)

", "url": "https://www.mql5.com/es/market/product/25232", "small_icon": "https://c.mql5.com/31/200/spadim-order-beep-email-notification-logo-60x60-7631.png", "middle_icon": "https://c.mql5.com/31/445/spadim-order-beep-email-notification-logo-140x140-2739.png", "icon": "https://c.mql5.com/31/200/spadim-order-beep-email-notification-logo-200x200-8605.png", "rating": 0, "price": 30, "published": 1505465248, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24129, "title": "Fibonacci Retracement MT5 Indicator by PipTick", "description": "

The Fibonacci indicator automatically displays the Fibonacci retracement levels, representing significant support and resistance. The range for calculating the indicator can be taken from the previous day, week, month, year or user-specified session.

Levels

100 % (High) of the range from the previous session.
0 % (Low) of the range from the previous session.
76,4 % of the range from the previous session.
61,8 % of the range from the previous session.
50 % of the range from the previous session.
38,2 % of the range from the previous session.
23,6 % of the range from the previous session.
138,2 % of the range from the previous session.

Recommendations

It is advantageous to insert multiple copies of our indicator into the chart and watch the levels from daily, weekly and monthly sessions. They tend to work very well as strong support and resistance levels.

Main features

The indicator shows the Fibonacci of the range from the previous session.
Six user-definable levels.
Alert notifications for indicator lines.
Custom session time.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting.
Customizable parameters (Colors, Line thickness, Visibility...).
High-speed calculation.
Available for MT4 and MT5.

Please visit the Fibonacci indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/es/market/product/24129", "small_icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-60x60-7875.png", "middle_icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-140x140-2202.png", "icon": "https://c.mql5.com/31/771/fibonacci-retracement-mt5-indicator-by-piptick-logo-200x200-2281.png", "rating": 0, "price": 0, "published": 1505403123, "popularity": 0.3786938534828333, "category": "Indicator", "votes": 0 }, { "id": 25039, "title": "AIS Simple Linear Smoothing MT5", "description": "

Este indicador implementa un proceso de suavizado lineal simple.

Una de las desventajas del suavizado exponencial es el rápido decaimiento de la señal. Esto hace que sea imposible realizar un seguimiento completo de las tendencias a largo plazo en el rango de precios. El suavizado lineal le permite ajustar con mayor precisión y precisión el filtrado de la señal.

El indicador se configura seleccionando parámetros:

LP: este parámetro le permite seleccionar el período de suavizado. Cuanto mayor sea su valor, más tendencias a largo plazo muestra el indicador. El valor válido es 0 - 255.

SP: este parámetro afecta la sensibilidad del indicador. Cuanto mayor sea este parámetro, mayor será la influencia de los últimos valores de la serie de precios. Si el valor de este parámetro es cero, entonces el indicador muestra una media móvil simple con un período igual a LP+1. El valor válido es 0 - 255.

", "url": "https://www.mql5.com/es/market/product/25039", "small_icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-60x60-8622.png", "middle_icon": "https://c.mql5.com/31/441/ais-simple-linear-smoothing-mt5-logo-140x140-1689.png", "icon": "https://c.mql5.com/31/198/ais-power-polynomial-trend-mt5-logo-200x200-5146.png", "rating": 0, "price": 30, "published": 1505321258, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25034, "title": "KVM Bitcoin Price Ticker Pro MT5", "description": "

A ticker that shows the average bitcoin price of the selected currency and keeps updating it at regular intervals.

\r\n

PRO version updates more often and displays details about the price change!

\r\n

Make sure you have added the API address http://metakod.com/mk/api in the list of allowed URLs on tab Tools → Options → Expert Advisors.

\r\n

All of the supported currencies and the API address are listed in the screenshots below.

\r\n\r\n

\r\n

Inputs

\r\n

Logging level - Controls the amount of details written to the log (default: INFO).
BTC (Bitcoin) to - Specifies the name of the selected currency (default: USD).
Label X position - X position of the top left point of the label relative to the chart corner (default: 5).
Label Y position - Y position of the top left point of the label relative to the chart corner (default: 20).

\r\n

Any comments or suggestions would be greatly appreciated!

", "url": "https://www.mql5.com/es/market/product/25034", "small_icon": "https://c.mql5.com/31/198/kvm-bitcoin-price-ticker-pro-mt5-logo-60x60-2501.png", "middle_icon": "https://c.mql5.com/31/440/kvm-bitcoin-price-ticker-pro-mt5-logo-140x140-5914.png", "icon": "https://c.mql5.com/31/198/kvm-bitcoin-price-ticker-pro-mt5-logo-200x200-6397.png", "rating": 0, "price": 30, "published": 1505321226, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 24502, "title": "Infinite Currency Strength Meter All Pairs MT5", "description": "

Think of the rarest pair you can think of. And I assure you that this indicator can compute it is strength.

\r\n

This Currency Meter will literally calculate any currency pairs, either it is a major pair, metal, CFD, commodity, cryptocurrency like Bitcoin/BTC or Ethereum/ETH and even stocks. Just name it and you will get it! There is no currency pair this Currency Meter cannot solve. No matter how rare or exotic is that currency, it will always be solved by this Currency meter on a real-time basis. Sounds good, right? Check it out and backtest it, because I really mean it.

\r\n

All you need to do is name four currencies and let the currency meter do all the calculations. This currency meter also has a very useful specification: just name the currency you want and the meter will scan all the pairs on your MetaTrader 4 and look for the best pair that will fit your currency and all of this is on a real-time basis.

\r\n

If the currency you named is strong, the currency meter will simply scan all your pairs and look for the weakest currency that could be traded on your currency of choice. And if your Currency is weak, the indicator will scan all your pairs to look for the strongest pair that can be traded with your currency of choice! You can refer to the screenshots below.

\r\n

So, this is how to use it:

\r\n

TIME_FRAME - Strength Meter works in all timeframes! Just choose timeframe from M1 to MN. *Note: choosing \"current\" means you choose your current timeframe on your chart.
PERIOD - input number of candles you want to choose. *Note: Period \"0\" means choosing the current candle.
First_Currency - name the 1st currency you want to get the strength (case-sensitive).
Second_Currency - name the 2nd currency you want to get the strength (case-sensitive).
Third_Currency - name the 3rd currency you want to get the strength (case-sensitive).
Fourth_Currency - name the 4th currency you want to get the strength (case-sensitive).
First_COLOR - color of the 1st currency.
Second_COLOR - color of the 2nd currency.
Third_COLOR - color of the 3rd currency.
Fourth_COLOR - color of the 4th currency.
Font_1 - font of objects on the right side of the chart.
Font_2 - font of objects on the left side of the chart.
ALERT

Alert_PAIR - activate alert if there are two currencies going in different directions meaning one is strong, the other one is weak. This would mean that one currency is above 70% and the other one is below 30%.
Alert_CURRENCY - activate alert if there is one currency that is strong or weak. Meaning, either it is higher than 70% or lower than 30%.
ALERT_OFF - choose if you do not want alerts.

Sound_Alert__1 - choose sound alert when a currency is above 70% (ALERT_LEVEL_1_STRONG) or below 30% (ALERT_LEVEL_1_WEAK).
Sound_Alert_2 - choose sound alert when a currency is above 90% (ALERT_LEVEL_2_STRONG) or below 10% (ALERT_LEVEL_2_WEAK).
ALERT_WHEN_STRONG
ALERT_LEVEL_1_STRONG - first level where the currency is getting strong. This should be lower than ALERT_LEVEL_2_STRONG. By default, its value is 70.
ALERT_LEVEL_2_STRONG - second level where the currency is getting extremely strong. This should be higher than ALERT_LEVEL_1_STRONG. You will hear a different sound alert here which can be edited on Sound_Alert_1. By default, its value is 90.
ALERT_WHEN_WEAK
ALERT_LEVEL_1_WEAK - first level where the currency is getting weak. This should be higher than ALERT_LEVEL_2_WEAK. By default, its value is 30.
ALERT_LEVEL_2_WEAK - second level where the currency is getting weak. This should be lower than ALERT_LEVEL_1_WEAK. By default, its value is 30.

\r\n

*NOTE: This is for MetaTrader 5 and the counterpart of my product \"All Currency Meter\".

\r\n

Link to the product: https://www.mql5.com/en/market/product/25026

", "url": "https://www.mql5.com/es/market/product/24502", "small_icon": "https://c.mql5.com/31/201/infinite-currency-strength-meter-all-pairs-mt5-logo-60x60-7097.png", "middle_icon": "https://c.mql5.com/31/438/infinite-currency-strength-meter-all-pairs-mt5-logo-140x140-4008.png", "icon": "https://c.mql5.com/31/201/infinite-currency-strength-meter-all-pairs-mt5-logo-200x200-2879.png", "rating": 5, "price": 39.99, "published": 1505300311, "popularity": 0.5544556755746447, "category": "Indicator", "votes": 1 }, { "id": 25318, "title": "Exclusive Bollinger MT5", "description": "

Exclusive Bollinger is a professional indicator based on the popular Bollinger Bands indicator and provided with an advanced algorithm.

Unlike the standard Bollinger, my Exclusive Bollinger provides better signals and is equipped with flexible settings allowing traders to adjust this indicator to their trading style. In the indicator, you can set up alerts (alert, email, push), so that you won't miss a single trading signal.

Exclusive Bollinger for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/24336

Advantages of the indicator

Perfect for scalping.
Generates minimum false signals.
Suitable for beginners and experienced traders.
Works on all timeframes.
Works on any financial instruments: FOREX, CFD, binary options.
Does not redraw.
Sending signals to email and mobile devices.

Recommended symbols

EURGBP, GBPJPY, AUDNZD, EURCHF, EURUSD.

Recommendations on usage

Sell when the price crosses the upper line of the indicator (see screenshot 1, entry points are encircled).

Buy when the price crosses the lower line of the indicator.

The indicator is best suited for intraday trading, on the timeframe from M1 to H1.

Parameters

Period - the key parameter responsible for the averaging period for calculating the indicator.
Deviation - the number of standard deviations from the main line.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email enable/disable sending e-mails. If true - enabled, false - disabled.
Push enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.
Type of signal - the setting is responsible for the signal to be sent by Alert, Email and Push. Type of signal can be equal to current bar (sending an alert when signal appears on the current bar) or last bar(when a signal occurred on the past bar).
clrUPPER - the color of the upper indicator line.
clrLOWER - the color of the lower indicator line.
clrAVERAGE - the color of the middle line of the indicator.
Width - line width.

", "url": "https://www.mql5.com/es/market/product/25318", "small_icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-60x60-3291.png", "middle_icon": "https://c.mql5.com/31/445/exclusive-bollinger-mt5-logo-140x140-1927.png", "icon": "https://c.mql5.com/31/383/exclusive-bollinger-mt5-logo-200x200-9546.png", "rating": 2.6666667461395264, "price": 36, "published": 1505217661, "popularity": 0, "category": "Indicator", "votes": 3 }, { "id": 25267, "title": "Predicting Donchian Channel MT5", "description": "

The Predicting Donchian Channel MT5 indicator allows predicting the future changes in the levels of the Donchian channel based on the channel position of the price.

\r\n

The standard ZigZag indicator starts drawing its ray in 99% of the time the opposite Donchian channel is touched.

\r\n

The forecast of the channel boundary levels will help in finding the points, where the correction ends or the trend changes, an also to estimate how soon those events can occur.

\r\n

Configurations

\r\n

Period - Donchian channel calculation period. Recommended values are from 12 to 240.

", "url": "https://www.mql5.com/es/market/product/25267", "small_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-60x60-6557.png", "middle_icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-140x140-3966.png", "icon": "https://c.mql5.com/31/1135/predicting-donchian-channel-mt5-logo-200x200-1044.png", "rating": 0, "price": 30, "published": 1505204869, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25229, "title": "PairsTrading MT5", "description": "

The EA identifies divergences in two correlated currency pairs and trades in the direction where they converge back.

Working timeframe: M30

Input parameters

MagicNumber - identification number for the EA.
OrdersComment - comment to order, automatic if an empty value is set.
Lots - lot size.
DepoPer001Lot - automatic lot calculation (specify the balance per 0.01 lot) (if 0, the value from 'Lots' parameter is used).
TimeFrame - working timeframe.
Symbol #2 - correlated currency.
Symbol #2 reverse - currency #2 with a reverse correlation to the current.
Symbol #2 lot - lot of currency #2, automatic if a zero value is set.
TradeType - drop-down list for selecting the trade direction:
- +Sell/Buy | -Buy/Sell - standard, for pairs with direct correlation.
- +Sell/Sell | -Buy/Buy - pairs with inverse correlation require this or the next value.
- +Buy/Buy | -Sell/Sell - pairs with inverse correlation require this or the previous value.
Min Correlation - minimum divergence for opening orders, in the range of 0.1 - 0.5.
MA Period (corr) - number of candles to calculate the average correlation
MA Level (corr) - How many times does the correlation have to be higher than the average to search for a signal
Open signal shift - offset of the signal to open. If set to \"0\", the current incomplete bar; if \"1\", the previous closed bar, etc.
Close signal shift - offset of the signal to close. If set to \"0\", the current incomplete bar; if \"1\", the previous closed bar, etc.
Min dist reopen (pips) - step in points for opening additional orders in case of a repeated signal.
Max spread - the maximum spread for opening new orders.
Hour start - hour to start searching for the entry signals.
Minute start - minute to start searching for the entry signals.
Hour end - hour to stop searching for the entry signals.
Minute end - minute to stop searching for the entry signals.
Close only in profit ($/lot) - profit value, at which closing orders is allowed.
Exit minutes - time for closing a trade, in case there were no other signals to close.
Profit time exit ($/lot) - profit value, at which closing orders by time is allowed.
Trail start ($/lot) - the number of points to start the trailing stop by equity.
Trail stop ($/lot) - trailing distance.
Stop loss ($/lot) - stop loss in currency.
Take profit ($/lot) - take profit in currency.

The value of parameters specified with ($/lot) are multiplied by the lot, so as not to change them as the lot size increases. Thus, if a parameter value is 1000 and lot is 0.1, position will be closed upon reaching a profit of >= $10.

The EA should be attached to one currency only, there is no need to attach the EA to the currency specified in Symbol #2.

", "url": "https://www.mql5.com/es/market/product/25229", "small_icon": "https://c.mql5.com/31/200/pairstrading-mt5-logo-60x60-9490.png", "middle_icon": "https://c.mql5.com/31/438/pairstrading-mt5-logo-140x140-5432.png", "icon": "https://c.mql5.com/31/200/pairstrading-mt5-logo-200x200-7444.png", "rating": 0, "price": 100, "published": 1505148471, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25115, "title": "Market Surfer Demo", "description": "

The Market Surfer Demo is a tool for manual traders who want to trade fast markets efficiently. All trading actions, like Buy, Sell, Buy/Sell Limit/Stop, Close, switch, double, half, etc. can be done with just one click.

\r\n\r\n\r\n

\r\n

Features

\r\n

Open, close, switch, switch half, switch double, double, half, etc. position with only 1 click.
Quick selection of lot size, maximum deviation, stop and target pips.
Convenient overview of most account, position and risk data.
Risk and Target from entry and current market in money and more.
Custom maximum margin to prevent you from taking too high risk.
Fast order- and position control.
Easy change of values for all quick selection parameter buttons.
All settings saved and restored per symbol.
Define close of a position by profit conditions, time or dynamic by Moving Average penetration.
Have an overview over pending orders, change their levels with convenient buttons.
Trading with numeric keypad: Buy, Sell, Close, Switch, adjust stop and target.

\r\n\r\n\r\n

\r\n

Inputs

\r\n

\r\n
Next equity milestone in base currency. Your next equity target. The milestone percentage indicator in the information panel shows you how close you are. It is for motivation.
\r\n
- 0: Off
- > 0: On
\r\n
\r\n Custom minimum margin level. Set a minimum margin level (= Margin / Equity x 100) maintained for your trading. For instance, if you do a Buy and the resulting margin level is below your minimum level, the orders is rejected, so not possible. This limits the risk taken. Simply follow this and your trading is much safer.\r\n
- 0: Off
- > 0: On
\r\n
\r\n
Debug messages in expert journal. Shows internal state message. Only required to track problems. Default Off.
\r\n

\r\n\r\n\r\n

\r\n

Panels

\r\n

\r\n
Informational Panel (top horizontal). Shows most important values about position and account, like account profit, margin, position margin, account risk and more.
\r\n
\r\n
Entry Panel (Button E). Use this panel to initiate orders and to control your position.
\r\n
- Upper third: Place orders, Market, Limit, Stop Limit, double, half position, switch position and more.
- Mid third: Control position, close position, delete all pending orders for symbol, attach stop and/or target, change stop, target, bracket (raise, lower, tighten, widen), set stop to breakeven, when possible.
- Lower third: Quick select order parameters like volume, maximum price deviation in points, stop and target pips (0 don't attach stop and/or target) and pip step size for adjusting limit/stop orders, target and stop.
\r\n
PS. You can easily change the parameter key values in the lower third: just click on the key, then click on Setup to enable setup mode, then in the same row below setup field click in the edit field, type new value, press return, click Setup again to disable setup mode.
\r\n
PS. If you click on C key, the edit field to the right allows to set a custom value for this parameter.
\r\n
\r\n
Exit Panel (Button X). In this panel set conditions to close position for symbol.
\r\n
- Condition symbol profit <=. Close position when symbol profit below value. Value can be negative, positive.
- Condition symbol Profit >=. Close position when symbol profit above value. Value can be negative, positive.
- Condition time. Close position at time.
- Condition Moving Average. Close position, when actual close of bar <> (adjustable) than Moving Average over N bars of chart timeframe.
\r\n
Attention: Close means close of actual bar by default.
\r\n
\r\n
Pending Orders Panel (Button P). This panel shows all pending orders for the symbol. You can change and delete them here.
\r\n
\r\n
Setup Panel (Button Set). You can setup:
\r\n
- Show Stop and Target in informational panel top right in absolute prices or in pips.
- Close position by Moving Average is triggered when bar closed (default) / by current tick is below, above MA.
- Invert Orders: If active, Buy and Sell orders (only market orders) are inverted. This is useful, if your trading decision is mostly wrong AND you are NOT profitable.
\r\n

\r\n\r\n\r\n

\r\n

Special Functions

\r\n

Upper right corner of chart (Ks on/off). If Ks on, then:

\r\n

Numeric keypad is active for placing orders.
The H key hides/shows all panels.

\r\n

Note: The demo is limited to one instance and to a maximum trade volume of 0.1 lots.

", "url": "https://www.mql5.com/es/market/product/25115", "small_icon": "https://c.mql5.com/31/199/market-surfer-demo-logo-60x60-8109.png", "middle_icon": "https://c.mql5.com/31/440/market-surfer-demo-logo-140x140-7892.png", "icon": "https://c.mql5.com/31/199/market-surfer-demo-logo-200x200-9062.png", "rating": 0, "price": 0, "published": 1505139134, "popularity": 0.0060578217414906195, "category": "Utility", "votes": 0 }, { "id": 25278, "title": "PreMarket Calculations", "description": "

The indicator displays useful trading information on the chart for futures contracts such as:

\r\n

Average daily volatility with adjustable period of time.
Optimal volume to trade depending on percentage of account balance you use. The percentage can be adjusted.
Optimal stop loss depending on your maximum risk per trade considering percentage of account balance you use.
Initial margin for the contract.
Tick value for the contract.

\r\n

The indicator has an ability to display dynamic daily volatility levels on the chart.

\r\n

Parameters

\r\n

Text Color – color of text information displayed on the chart
Font Size – size of text information displayed on the chart
Days, Average daily volatility is calculated over
Percentage of account balance to use to calculate volume
Stop-Loss percentage – maximum risk per trade
Display average daily volatility levels on the chart – on/off
Color of volatility levels
Display contract information: Initial Margin, Tick Value – on/off

", "url": "https://www.mql5.com/es/market/product/25278", "small_icon": "https://c.mql5.com/31/201/premarket-calculations-logo-60x60-6601.png", "middle_icon": "https://c.mql5.com/31/440/premarket-calculations-logo-140x140-5913.png", "icon": "https://c.mql5.com/31/201/premarket-calculations-logo-200x200-4577.png", "rating": 0, "price": 30, "published": 1504889940, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 23105, "title": "CodEx", "description": "

Operation of the CodEx Expert Advisor is based on patterns composed of consecutive candles. Positions are closed when opposite signals appear.

\r\n

Sequences of candles are encoded into an integer according to the following rule. The code number must be converted to binary form and the highest bit must be discarded. The resulting sequence of bits encodes a continuous sequence of candles, where 1 is a bullish candle, 0 is a bearish candle. The higher bits encode the earlier candles. For example: 19[10]=10011[2], the obtained sequence of candles is [bear][bear][bull][bull].

\r\n

In the input parameters, the patterns for buy signals are encoded. The EA obtains the patterns for sell signals by inverting the initial patterns.

\r\n\r\n

\r\n

Input parameters

\r\n

Code Set - string parameter that contains numbers separated by comma - codes of candlestick patterns for buying, used in trading and in testing of the EA.
Code - numeric parameter, that contains the code of the candlestick pattern of the buy signal, used in optimization of the EA.
Stop Loss - loss fixing level in points.
Take Profit - profit fixing levels in points.
Lot - lot size.

\r\n

The screenshots demonstrate the backtesting results. The Expert Advisor was tested on EURUSD H1 in the \"Every tick\" mode from 04.01.2016 to 13.08.2017, with the values Code Set=34, Lot=0.1.

", "url": "https://www.mql5.com/es/market/product/23105", "small_icon": "https://c.mql5.com/31/200/codex-logo-60x60-1020.png", "middle_icon": "https://c.mql5.com/31/439/codex-logo-140x140-2936.png", "icon": "https://c.mql5.com/31/200/codex-logo-200x200-4882.png", "rating": 4.166666507720947, "price": 0, "published": 1504719026, "popularity": 0.9749006802200928, "category": "Expert", "votes": 6 }, { "id": 25186, "title": "Break Day Range", "description": "

A signal indicator. It implements the tactics described in Larry Williams' book \"Long-Term Secrets to Short-Term Trading\", Chapter 4, \"Volatility Breakouts - The Momentum Breakthrough\". The indicator displays entry points on the chart using arrows. Input parameters are not used.

\r\n

Example of use in a working trading system

\r\n

It is used on a live account as part of the portfolio of strategies on the GMKN futures. Signal monitoring: https://www.mql5.com/en/signals/204344. Screenshots were created based on the monitoring data.

\r\n

MetaTrader 5 does not provide generation of reports on one or selected symbols, therefore, the information on the trading results was displayed using the tools described in https://www.mql5.com/en/articles/244. The profitreport.mq5 script was slightly modified to filter deals on the GMKN futures. Trading was performed using one contract.

", "url": "https://www.mql5.com/es/market/product/25186", "small_icon": "https://c.mql5.com/31/200/break-day-range-logo-60x60-5514.png", "middle_icon": "https://c.mql5.com/31/440/break-day-range-logo-140x140-9069.png", "icon": "https://c.mql5.com/31/200/break-day-range-logo-200x200-7957.png", "rating": 0, "price": 59, "published": 1504698999, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25123, "title": "Mr Big MT5", "description": "

The indicator shows and highlights the chart candles, which are formed as a result of large players entering the market in large volumes. Such candles can also be formed after achieving a certainty on the market, when most of the participants hold positions in the same direction. The movement is likely to continue in that direction after such candles.

\r\n

The indicator highlights the significant candles from the existing ones on the chart;
The indicator allows identifying the trends based on candles, in which the positions towards the main tendency are strengthened;
It is possible to filter signals (candles) by volatility, and to display only the ones that are greater than the specified number of points. (this parameter can be the same for all time frames or different for each time frame);
It is possible to filter according to the following principle: display only the candles that break a certain level of the price it is based on (calculated mathematically), or ignore this condition;
It is possible to filter the display of signals by time, or ignore this condition (terminal time on the chart);
The indicator can be used on any timeframe, on any instrument;
It can be used for long-term and medium-term trading or scalping.

\r\n\r\n

\r\n

Settings

\r\n

Period_Candle - calculation period for signal search;
Confirmation_Level - if set to true, the signal must break a certain price level it is based on; if false, the condition is ignored;
Type_Arrows - type of arrows;
Min_Candle_Pips_Common - filter of the signal's (candle) volatility in points, (signals smaller than the values specified in the Min_Candle_Pips_ variables will not be displayed):\r\n
- If set to true, then a value from the Min_Candle_Pips_Common_ALL_TF variable is used as a filter, common for all timeframes;
- If false, then separate values from the Min_Candle_Pips_XX variables are used for each timeframe.
\r\n
Min_Candle_Pips_Common_ALL_TF - signal size in points, common for all timeframes;
Min_Candle_Pips_M1 - signal size in points, used for the M1 timeframe;
Min_Candle_Pips_M2 - signal size in points, used for the M2 timeframe;
Min_Candle_Pips_M3 - signal size in points, used for the M3 timeframe;
Min_Candle_Pips_M4 - signal size in points, used for the M4 timeframe;
Min_Candle_Pips_M5 - signal size in points, used for the M5 timeframe;
Min_Candle_Pips_M6 - signal size in points, used for the M6 timeframe;
Min_Candle_Pips_M10 - signal size in points, used for the M10 timeframe;
Min_Candle_Pips_M12 - signal size in points, used for the M12 timeframe;
Min_Candle_Pips_M15 - signal size in points, used for the M15 timeframe;
Min_Candle_Pips_M20 - signal size in points, used for the M20 timeframe;
Min_Candle_Pips_M30 - signal size in points, used for the M30 timeframe;
Min_Candle_Pips_H1 - signal size in points, used for the H1 timeframe;
Min_Candle_Pips_H2 - signal size in points, used for the H2 timeframe;
Min_Candle_Pips_H3 - signal size in points, used for the H3 timeframe;
Min_Candle_Pips_H4 - signal size in points, used for the H4 timeframe;
Min_Candle_Pips_H6 - signal size in points, used for the H6 timeframe;
Min_Candle_Pips_H8 - signal size in points, used for the H8 timeframe;
Min_Candle_Pips_H12 - signal size in points, used for the H12 timeframe;
Min_Candle_Pips_D1 - signal size in points, used for the D1 timeframe;
Min_Candle_Pips_W1 - signal size in points, used for the W1 timeframe;
Min_Candle_Pips_MN1 - signal size in points, used for the MN1 timeframe;
Time_Filter - filter display of the signals by time;
Start_Signal_Hour - hour to start displaying the signals (terminal time on the chart);
Start_Signal_Minute - minute to start displaying the signals (terminal time on the chart);
End_Signal_Hour - hour to stop displaying the signals (terminal time on the chart);
End_Signal_Minute - minute to stop displaying the signals (terminal time on the chart).

", "url": "https://www.mql5.com/es/market/product/25123", "small_icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-60x60-8017.png", "middle_icon": "https://c.mql5.com/31/438/mr-big-mt5-logo-140x140-3816.png", "icon": "https://c.mql5.com/31/199/mr-big-mt5-logo-200x200-6528.png", "rating": 0, "price": 99, "published": 1504691933, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25200, "title": "ADR ST Patterns Strategy", "description": "

ADR ST Patterns Strategy is a modification of the classical ADR indicator. This simple indicator corresponds to the parameters specified in the ST Patterns Strategy (https://stpatterns.com/). Structural Target Patterns represents the market consistently divided into components. No trend lines, geometric proportions of the model itself, trading volume, or open market interest are needed for the formation of ST Patterns. They are easily recognized and built only on the basis of breaking through the fractal levels and the distance to the target. ST Patterns overcome the market uncertainty characterizing the previously known graphical compositions and simplify the work of the trader.

The indicator calculates the average daily range of completed trading days and divides this value by a given amount. The result is displayed as a chart in a separate window. It is possible to use the indicator on various timeframes.

Inputs

ADR Period - number of days used to calculate the average;
Divider - divisor, by which the ADR is divided.

You can set the color and size of the chart in the Colors tab.

", "url": "https://www.mql5.com/es/market/product/25200", "small_icon": "https://c.mql5.com/31/200/adr-st-patterns-strategy-logo-60x60-2328.png", "middle_icon": "https://c.mql5.com/31/446/adr-st-patterns-strategy-logo-140x140-5190.png", "icon": "https://c.mql5.com/31/200/adr-st-patterns-strategy-logo-200x200-3864.png", "rating": 5, "price": 0, "published": 1504621230, "popularity": 0.3609912026599921, "category": "Indicator", "votes": 1 }, { "id": 25199, "title": "Fractals ST Patterns Strategy", "description": "

Fractals ST Patterns Strategy is a modification of Bill Williams' Fractals indicator. It allows setting any number of bars to find a fractal. This simple indicator corresponds to the parameters specified in the ST Patterns Strategy (https://stpatterns.com/). Structural Target Patterns are essentially the market itself, which is consistently divided into components. To form ST Patterns, no trend lines, geometric proportions of the model itself, trading volume or open market interest are needed. They are easily recognized and built solely on the basis of breaking through the fractal levels and the distance to the Target. ST Patterns remove the uncertainty from the market, which is inherent in the previously known graphic compositions, and simplify the work of the trader.

The fractal consists of two sets of arrows - up (upper fractals) and down (lower fractals). Each fractal satisfies the following conditions:

Upper fractal - maximum (high) of a signal bar exceeds or is equal to maximums of all bars from the range to the left and to the right;
Lower fractal - minimum (low) of a signal bar is less or equal to minimums of all bars from the range to the left and to the right.

Input parameters

Bars around - the number of bars before and after the central bar.
Arrow offset - visual offset of the arrow from the bar's High/Low in points.

You can set the arrows' color and size separately for upper and lower fractals in the Colors tab.

", "url": "https://www.mql5.com/es/market/product/25199", "small_icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-60x60-8522.png", "middle_icon": "https://c.mql5.com/31/445/fractals-st-patterns-strategy-logo-140x140-6380.png", "icon": "https://c.mql5.com/31/200/fractals-st-patterns-strategy-logo-200x200-1619.png", "rating": 5, "price": 0, "published": 1504615640, "popularity": 0.5858065989515717, "category": "Indicator", "votes": 1 }, { "id": 24712, "title": "Gekko Jade A Customizable EA", "description": "

Instrumento: funciona con pares de monedas, futuros y acciones.

\r\n

Tipo: Scalper, Short Trade, Swing Trade, Day Trade, Buy and Hold.

\r\n

Descripción

\r\n

Las series de Expert Advisors Gekko Jade son EA’s diseñados para ser versátiles y que permitan combinar más de 50 parámetros de entrada de diferentes maneras;
Permite la negociación intradiario y de posición;
Permite el control de ventanas de tiempo de negociación;
Permite diferentes tipos de parámetros y estrategias para entrar y salir del mercado;
Adecuado para principiantes y expertos;
Se adapta a cualquier periodo de tiempo;
Permite configuración de deslizamiento, comisión y spread para realizar pruebas retrospectivas más realistas.

\r\n

Entradas

\r\n

General Setup: ingrese volumen, máximo de entradas por día, dirección de negociación y objetivo de ganancias para el día;
Timing Windows: ingrese el tiempo de listo para operar, limite el tiempo para ingresar al mercado y el tiempo para cerrar todas las posiciones;
Indicators: elija entre hasta cinco indicadores para confirmar la entrada o salida (activando uno o todos para confirmar una operación);
Profit and Loss: active diferentes controles como: simple Take Profit, Stop Loss, Breakeven, Trailing Stop
Metrics options: configure TP (limite de ganancia) y SL (limite de pérdida) en base a PIP’s, precio, puntos, ticks, valor financiero, % de capital o% de precio de entrada.
Alerts: configure alertas en tiempo real por correo electrónico y notificaciones push a dispositivos móviles para eventos importantes;
Backtesting setup: configure la comisión, el spread y el deslizamiento y haga que sus backtestings sean más realistas.

\r\n

Indicadores Disponibles

\r\n

HiLo Activator: active y configure las oscilaciones del Activador HiLo para determinar puntos fuertes de entrada y salida;
Relative Strenght Index: active y configure los límites del RSI para determinar puntos fuertes de entrada y salida;
Price vs. Moving Average Crossing: active y configure los cruces entre el precio y medias moviles para determinar puntos fuertes de entrada y salida;
Two Moving Averages Crossing: active y configure cruces entre dos medias móviles diferentes para determinar puntos fuertes de entrada y salida;
High's and Low's Breaking: active y configure el rompimiento del precio en los Tops y Fondos de las ultimas \"x\" barras para determinar puntos fuertes de entrada y salida.

\r\n

Recomendaciones

\r\n

Past performance is not necessarily indicative of future results;
Use the bots with caution:
La negociación de acciones, monedas y futuros contiene un riesgo sustancial y no es para todos los inversores. Un inversor podría perder todo o más que la inversión inicial;
El capital de riesgo es dinero que se puede perder sin poner en peligro la seguridad financiera o el estilo de vida. Solo el capital de riesgo debe ser usado para la negociación y solo aquellos con suficiente capital de riesgo deberían considerar la negociación;
El rendimiento en el pasado no es necesariamente indicativo de resultados futuros;
Usar los robots con precaución:

\r\n

Antes de comprar el EA, descargue la versión demostración y realice las pruebas;
Antes de negociar con una cuenta real, negocie durante un período de tiempo en una cuenta demo o en una cuenta real, pero con tamaños de lote reducidos.

\r\n

¡Buenas Negociaciones!

Done parte de sus ganancias a buenas causas y entidades humanitarias de su elección. \"El dinero solo viene si hay un propósito para que lo ganes\".", "url": "https://www.mql5.com/es/market/product/24712", "small_icon": "https://c.mql5.com/31/195/gekko-jade-a-customizable-ea-logo-60x60-3582.png", "middle_icon": "https://c.mql5.com/31/445/gekko-jade-a-customizable-ea-logo-140x140-1734.png", "icon": "https://c.mql5.com/31/195/gekko-jade-a-customizable-ea-logo-200x200-4217.png", "rating": 0, "price": 40, "published": 1504521184, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 25134, "title": "Gekko Parabolic SAR Plus", "description": "

Tipo: Tendencia

\r\n

Este es el SAR parabólico personalizado de Gekko, una versión personalizada del famoso indicador de SAR parabólico. Use el SAR regular y aproveche las diferentes formas de recibir alertas cada vez que haya un posible punto de entrada o salida.

\r\n

Entradas

\r\n

Step: Factor de aceleración (AF), por defecto es 0.02. Significa que aumenta en 0.02 cada vez que el punto extremo hace una nueva alta o baja. AF puede alcanzar un máximo de \"x\" en función del segundo parámetro a continuación, sin importar cuánto tiempo se extienda la tendencia;
Maximum: Punto Extremo (EP): el máximo más grande o el mínimo más pequeño de la tendencia actual. El valor predeterminado es 0.2;
Plays a sound when there is a swing: ponlo como true y el indicador emitirá un sonido en el terminal MetaTrader cada vez que se produzca una nueva señal que indique puntos de entrada o salida.
Write Logs On Terminal Window: ponlo como true si deseas que el indicador escriba registros en la pestaña Experts de la terminal cada vez que se produzca una nueva señal que indique puntos de entrada o salida.
Send Mobile Push Notifications: ponlo como true si deseas recibir notificaciones push en la aplicación MetaTrader en su teléfono móvil cada vez que se produzca una nueva señal que indica puntos de entrada o salida.
Send E-Mail Alerts: ponlo como true si deseas recibir alertas por correo electrónico en la dirección de correo electrónico configurada en el terminal cada vez que se produzca una nueva señal que indica puntos de entrada o salida;

\r\n

¡Buenas Negociaciones!

\r\n

Done parte de sus ganancias a buenas causas y entidades humanitarias de su elección. \"El dinero solo viene si hay un propósito para que lo ganes\".

", "url": "https://www.mql5.com/es/market/product/25134", "small_icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-60x60-2863.png", "middle_icon": "https://c.mql5.com/31/438/gekko-parabolic-sar-plus-logo-140x140-1972.png", "icon": "https://c.mql5.com/31/199/gekko-parabolic-sar-plus-logo-200x200-3962.png", "rating": 5, "price": 50, "published": 1504284380, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 19554, "title": "Quick Style MT5", "description": "

The Quick Style utility is designed for facilitation and acceleration of working with the properties of graphical objects. Left-click a graphical object while holding the Shift key to open the quick access window for configuring the object properties. In the window, you can change the color, style and line width with one click, including those of other graphical objects. All changes are displayed immediately. To close the Quick Style, simply click the free space on the chart.

\r\n

The utility is easy to use and has no settings.

", "url": "https://www.mql5.com/es/market/product/19554", "small_icon": "https://c.mql5.com/31/199/quick-style-mt5-logo-60x60-1048.png", "middle_icon": "https://c.mql5.com/31/440/quick-style-mt5-logo-140x140-3327.png", "icon": "https://c.mql5.com/31/199/quick-style-mt5-logo-200x200-8972.png", "rating": 4.75, "price": 0, "published": 1504184120, "popularity": 0.05833283097030178, "category": "Utility", "votes": 12 }, { "id": 24902, "title": "EasyTrades", "description": "

Small trading panel for managing orders and positions in 1 click for MetaTrader 5

The version for MetaTrader 4 is here, you can check it in the tester without restrictions

Set hidden TakeProfit, StopLoss and pending orders at lines placed on the chart.
Virtual breakeven.
Virtual trailing stop.
Close all positions.
Close only Buy positions.
Close only Sell positions.
Work in the back testing mode (working in the tester is limited).
Place up to 20 virtual orders.
News trading and operation by time.
Alert - play a sound alert when the price reaches a level.
Automatically close positions by total profit in the deposit currency on the entire account or by symbol.

Description

It is compact and occupies very little space on the chart. You can drag it to anywhere on the chart or minimize it to free space.

It is convenient for pipsing and scalping. For comfortable trading, apply it with the \"VisualInfoMoves\" indicator.

Great functionality, hidden StopLoss, TakeProfit and pending orders remove the restriction on the minimum distance, thus allowing you to place orders within the spread.

It is possible to open a position and place orders by time. It is convenient you are not near the computer at the time, or you need to place a couple of orders at the last moment before the news - done with a single click.

It is possible to delete an order or remove position by time.

It is possible to place a grid of orders in different directions and with different lot sizes at the selected step: up to 20.

The TrailingStop, Breakeven values are changed on the chart - there is no need to open the EA settings window.

Closing positions by total positive profit on the account or symbol, the value must be greater than \"0\".

Saves all screenshots of trade operations in the \"Files\" folder.

The panel has been developed for real trading conditions with all error handling.

Recommendations

Before using the program on a live account, study its capabilities on a demo account.

On 4K monitors small buttons, you need to change the system font size.

Features are presented in the video.

", "url": "https://www.mql5.com/es/market/product/24902", "small_icon": "https://c.mql5.com/31/197/easytrades-logo-60x60-2554.png", "middle_icon": "https://c.mql5.com/31/440/easytrades-logo-140x140-7706.png", "icon": "https://c.mql5.com/31/197/easytrades-logo-200x200-7255.png", "rating": 1, "price": 35, "published": 1504113908, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 25068, "title": "Gekko ADX Plus", "description": "

Este es el índice direccional medio personalizado de Gekko (ADX), una versión personalizada del famoso indicador ADX. Use el ADX regular y aproveche tres cálculos de señales de entrada y diferentes formas de recibir alertas cada vez que haya un posible punto de entrada o salida.

\r\n

Entradas

\r\n

Period: Periodo para el cálculo del ADX;
PlotSignalType: Cómo el indicador calculará las señales de entrada (oscilación):

1- ShowSwingsOnTrendLevel: Mostrar señales para los cambios de confirmación de tendencia;
2- ShowSwingsOnTrendLevelDirection: Muestra señales para los cambios de confirmación de tendencia más la dirección de entrada (alta o baja);
3- ShowSwingsOnPosAndNegDI: Muestra las señales de entrada / salida (alta o baja) basadas en el cruce entre DI+ y de DI- más la confirmación de tendencia;

Trend Level: El nivel utilizado para confirmar una formación de Tendencia.
Plays a sound when there is a swing: ponlo como true y el indicador emitirá un sonido en el terminal MetaTrader cada vez que se produzca una nueva señal que indique puntos de entrada o salida.
Write Logs On Terminal Window: ponlo como true si deseas que el indicador escriba registros en la pestaña Experts de la terminal cada vez que se produzca una nueva señal que indique puntos de entrada o salida
Send Mobile Push Notifications: ponlo como true si deseas recibir notificaciones push en la aplicación MetaTrader en su teléfono móvil cada vez que se produzca una nueva señal que indica puntos de entrada o salida.
Send E-Mail Alerts: ponlo como true si deseas recibir alertas por correo electrónico en la dirección de correo electrónico configurada en el terminal cada vez que se produzca una nueva señal que indica puntos de entrada o salida;

\r\n

¡Buenas Negociaciones!

\r\n

Done parte de sus ganancias a buenas causas y entidades humanitarias de su elección. \"El dinero solo viene si hay un propósito para que lo ganes\".

", "url": "https://www.mql5.com/es/market/product/25068", "small_icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-60x60-2270.png", "middle_icon": "https://c.mql5.com/31/446/gekko-adx-plus-logo-140x140-4687.png", "icon": "https://c.mql5.com/31/199/gekko-adx-plus-logo-200x200-6043.png", "rating": 0, "price": 50, "published": 1504110418, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24975, "title": "Gekko RSI Plus", "description": "

Este es el Índice de Fuerza Relativa (RSI) personalizado de Gekko, una versión personalizada del famoso indicador RSI. Use el RSI normal y aproveche dos cálculos de señales de entrada y diferentes formas de recibir alertas cada vez que haya un posible punto de entrada o salida.

\r\n

Entradas

\r\n

Period: Periodo para el cálculo de RSI (cantidad de barras);
Cómo el indicador calculará las señales de entrada (oscilación):

1- Produce señales de salida para oscilaciones basadas en el RSI entrando o saliendo de las zonas de niveles superior e inferior;
2- Produce Señales de Entrada y Salida para oscilaciones basados en RSI que cruzan arriba o abajo de la línea media (50);

Plays a sound when there is a swing: ponlo como true y el indicador emitirá un sonido en el terminal MetaTrader cada vez que se produzca una nueva señal que indique puntos de entrada o salida.
Write Logs On Terminal Window: ponlo como true si deseas que el indicador escriba registros en la pestaña Experts de la terminal cada vez que se produzca una nueva señal que indique puntos de entrada o salida
Send Mobile Push Notifications: ponlo como true si deseas recibir notificaciones push en la aplicación MetaTrader en su teléfono móvil cada vez que se produzca una nueva señal que indica puntos de entrada o salida.
Send E-Mail Alerts: ponlo como true si deseas recibir alertas por correo electrónico en la dirección de correo electrónico configurada en el terminal cada vez que se produzca una nueva señal que indica puntos de entrada o salida;

\r\n

¡Buenas Negociaciones!

\r\n

Done parte de sus ganancias a buenas causas y entidades humanitarias de su elección. \"El dinero solo viene si hay un propósito para que lo ganes\".

", "url": "https://www.mql5.com/es/market/product/24975", "small_icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-60x60-9176.png", "middle_icon": "https://c.mql5.com/31/439/gekko-rsi-plus-logo-140x140-6419.png", "icon": "https://c.mql5.com/31/199/gekko-rsi-plus-logo-200x200-8804.png", "rating": 0, "price": 50, "published": 1504110413, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 25025, "title": "Simple Line for MQL5", "description": "

It is an analogue of the indicator of levels at https://www.mql5.com/en/market/product/24273 for the MetaTrader 5 platform. The indicator shows the levels of the past month, week and day. In addition, it draws a level in percentage relative to the difference between the High and Low of the past month and week. For the daily levels of the past day, the Close levels are additionally displayed. All you need to do is to configure the display parameters of the levels to your liking. In some cases, after launching the indicator, it can be necessary to go to the required timeframe starting with the month, then week. and then day.

\r\n

Parameters

\r\n

Monthly installations - settings for the monthly period;
MonthlyLines - enable (disable) displaying the levels;
TypeLinesM - line type to display the levels;
InpWidthLinesM - line width to display the levels;
InpMonthlyPercentageLevel - show (hide) the line level as percentage;
PercentageM - level of the line set as a percentage of the High-Low range. Default = 50;
TypeLinesM - type of the line set as a percentage of the High-Low range;
InpWidthLinesM - width of the line set as a percentage of the High-Low range;
ColorLinesM - color of the lines;
Weekly installations - settings for the weekly period;
WeeklyLines - enable (disable) displaying the levels;
TypeLinesW - line type to display the levels;
InpWidthLinesW - line width to display the levels;
InpWeeklyPercentageLevel - show (hide) the line level as percentage;
PercentageW - level of the line set as a percentage of the High-Low range. Default = 50;
TypeLinesPW - type of the line set as a percentage of the High-Low range;
InpWidthLinesPW - width of the line set as a percentage of the High-Low range;
ColorLinesW - color of the lines;
Daylight settings - settings for the daily period;
PreviousDayLines - enable (disable) displaying the levels;
TypeLinesPDL - line type to display the levels;
InpWidthLinesPDL - line width to display the levels;
InpDayCloseLevel - show/hide the daily Close level;
TypeLinesPDLClose - line type of the daily Close level;
InpWidthLinesPDLClose - line width of the daily Close level;
ColorLinesPDL - color of the lines;
The first trading day of the week - set the first trading day (default is Monday);
The last trading day of the week - set the last trading day (default is Friday).

", "url": "https://www.mql5.com/es/market/product/25025", "small_icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-60x60-4334.png", "middle_icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-140x140-3484.png", "icon": "https://c.mql5.com/31/1287/simple-line-for-mql5-logo-200x200-7239.png", "rating": 0, "price": 30, "published": 1503918388, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24915, "title": "PowerSignalMT5", "description": "

PowerSignal is a complete trading system based on the ATR technical indicator. This indicator will record the current status of each POWERTREND in every time frame and currency pair analyzed. The PowerSignal creates a trend strength and entry point signal list display by evaluating these data. If there is a full coincidence on any pair an alert will pop up indicating such case. List data includes Symbol, M5-MN1, BuyPercent, SellPercent, LastEntry. The LastEntry shows entry points (periods, price, time). When the trend intensity is greater than 75%, it is considered to be a strong currency pair.

Inputs Value

Periods = 14 - indicator period.
Text color = White - Normal text color.
Buy Signal color = LawnGreen - Long signal color.
Sell signal color = OrangeRed - Short signal color.
Alert_ON = false - Disable Alarm. true - Enable Alarm: support Alert, Email, push.
Alert_Min_Interval = 15
Entry_Percent = PERCENT_100 - Trend percentage requirements PERCENT_100 or more.
Wait_Mins_For_Next_Signal = 30 - Wait for the next time of signal.

Author

Daying Cao, an experienced software engineer.

", "url": "https://www.mql5.com/es/market/product/24915", "small_icon": "https://c.mql5.com/31/197/powersignalmt5-logo-60x60-2675.png", "middle_icon": "https://c.mql5.com/31/445/powersignalmt5-logo-140x140-1219.png", "icon": "https://c.mql5.com/31/197/powersignalmt5-logo-200x200-5265.png", "rating": 0, "price": 30, "published": 1503590519, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 24873, "title": "PZ Pennants MT5", "description": "

Este indicador encuentra banderines , que son patrones de continuación identificados por líneas de tendencia convergentes que rodean un período de consolidación de precios. Las operaciones se señalan utilizando un período de ruptura junto con la ruptura de la formación.

[ Guía de instalación | Guía de actualización | Solución de problemas | FAQ | Todos los productos ]

Fácil de usar
Colores y tamaños personalizables.
Implementa señales de arranque
Implementa alertas de todo tipo.

Uso óptimo

Para ver banderines de todos los tamaños, que pueden superponerse, cargue el indicador varias veces en el gráfico con diferentes tamaños, por ejemplo 6, 12, 18 y 24.

Parámetros de entrada

Tamaño: Tamaño de los patrones que se encontrarán, expresados como barras entre puntos alternativos.
Período de ruptura: período de Donchian para las señales de ruptura
Max. Barras de historial: cantidad de barras pasadas para examinar en el gráfico
Color de patrones alcistas: este parámetro se explica por sí mismo
Color de patrones bajistas: este parámetro se explica por sí mismo
Color de patrones ininterrumpidos: este parámetro se explica por sí mismo
Ancho de línea: tamaño de las líneas del patrón
Color de los brotes alcistas: este es el color para las flechas de compra
Color de los brotes bajistas: este es el color para las flechas de venta
Tamaño de flecha: este es el tamaño de las flechas que se muestran en el gráfico
Nombre de alerta personalizada: título personalizado para las alertas generadas en este gráfico
Mostrar alertas: habilite o deshabilite las alertas de pantalla
Alertas de correo electrónico: habilite o deshabilite las alertas de correo.
Alertas de inserción: active o desactive las alertas de inserción.
Alertas de sonido: active o desactive las alertas de sonido.
Archivo de sonido: archivo de sonido para reproducir cuando se eleva una alerta de pantalla.

Autor

Arturo López Pérez, inversor privado y especulador, ingeniero de software y fundador de Point Zero Trading Solutions.

", "url": "https://www.mql5.com/es/market/product/24873", "small_icon": "https://c.mql5.com/31/196/pz-pennants-mt5-logo-60x60-8775.png", "middle_icon": "https://c.mql5.com/31/440/pz-pennants-mt5-logo-140x140-8473.png", "icon": "https://c.mql5.com/31/196/pz-pennants-mt5-logo-200x200-7200.png", "rating": 0, "price": 75, "published": 1503488134, "popularity": 0.6995254414937147, "category": "Indicator", "votes": 0 }, { "id": 24882, "title": "FFx Basket Scanner MT5", "description": "

MetaTrader 4 version available here: https://www.mql5.com/en/market/product/24881

FFx Basket Scanner is a global tool scanning all pairs and all\r\n timeframes over up to five indicators among the 16 available. You will \r\nclearly see which currencies to avoid trading and which ones to focus \r\non.

\r\n

Once a currency goes into an extreme zone (e.g. 20/80%), you can \r\ntrade the whole basket with great confidence. Another way to use it is \r\nto look at two currencies (weak vs strong) to find the best single pairs\r\n to trade.

\r\n

The panel is fully flexible for easy use

\r\n

Alert at extreme %
Select up to nine timeframes (any combination)
Select up to five indicators among the 16 available
Maximize/minimize the panel to keep only the essential or the whole information visible
One-click to open the symbols chart with selected template and timeframe

\r\n

User Inputs

\r\n

Dashboard ID: number for each instance applied on the same chart.
Candle Close: set here if you want the calculation to be done at candle close or in real time (current candle).
Currency: select here the currency for the panel calculation.
Horizontal/Vertical Shift: set here any number to place the dashboard anywhere on the chart.
Template Name: name of the template you want to be applied when a pair is clicked and chart opened
Timeframe: timeframe you want to be applied when a pair is clicked and chart opened
Strong/Weak Levels %: from 0 to 100 when levels are reached, it can give an alert (popup/sound/email/push). Alert can be activated/deactivated by switching any of the true/false parameters.
Then, all usual parameters for the standard indicators like the ones provided in your MetaTrader 4 platform (see below).

\r\n

The panel can be displayed in a compact mode to monitor only the meter and timeframes selection (see images below).

\r\n

Moving Average

Period: period of the MA
Shift: shift of the MA
Method: method of the MA
ApplyTo: applied price of the MA

MACD

FastEMA: fast EMA period of the MACD
SlowEMA: slow EMA period of the MACD
SignalSMA: SMA period of the MACD
Applied Price: applied price of the MACD

Stochastic

KPeriod: k period of the STO
DPeriod: d period of the STO
Slowing: slowing of the STO
MAMethod: method of the STO
PriceField: applied price of the STO

RSI

Period: period of the RSI
ApplyTo: applied price of the RSI

WPR

Period: period of the WPR

Momentum

Period: period of the Momentum
ApplyTo: applied price of the Momentum

CCI

Period: period of the CCI
Applied Price: applied price of the CCI

ADX

Period: period of the ADX

PSAR

Step: step of the PSAR
Maximum: maximum of the PSAR

DeMarker

Period: period of the DeMarker

Bulls

Period: period of the Bulls

Bears

Period: period of the Bears

Force Index

Period: period of the Force Index
Method: method of the Force Index
Volumes: volumes of the Force Index

", "url": "https://www.mql5.com/es/market/product/24882", "small_icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-60x60-2593.png", "middle_icon": "https://c.mql5.com/31/438/ffx-basket-scanner-mt5-logo-140x140-1521.png", "icon": "https://c.mql5.com/31/196/ffx-basket-scanner-mt5-logo-200x200-3578.png", "rating": 0, "price": 3030, "published": 1503484085, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 26680 }

Inputs

\r\n\r\nTrading sessions

System messages

Settings

Parameters

Advantages

Parameters

How Does It Work?

Recommendation

La utilidad le permite probar manualmente sus estrategias en el probador de estrategias. Comercio con un clic en el gráfico de visualización.

Gestión

El panel contiene dos pestañas comerciales: Posiciones y Órdenes .

Cargando indicadores al probador de estrategias.

Instruction

Distinctive features

Appearance and use

Input parameters

Launching the indicator

Features

Available Oscillators for Divergence Detection

Inputs

How it works

Recommended conditions

Description of parameters

Inputs

\r\n\r\nTrading sessions

System messages

The indicator parameters

Purpose

Key features

Main Indicator Parameters

Settings

Author

Trading conditions

Parameters

Indicator Input Parameters

Settings

Features

Inputs

For EA Developers

Features

Inputs

For EA Developers

Parameters

Using Jack of all Trades MT5

The indicator is fully flexible directly from the chart

User Inputs

What does it do?

What it does not do?

Instructions

What does it do?

What it does not do?

Instructions

Settings

User Patterns

Offline Charts

Sorting, Scrolling, Opening Charts

Full Description

Indexes of 8 custom currencies

Currencies Pairs

Customization & friendliness

Parameters

Vertical lines

Horizontal lines

Description of some time periods

Some input parameter features

Notes

Important

Combined Negative Management

TSO Signal Builder

TSO Order Recovery

TSO Loss Management

Keep us updated to keep you updated

Key Inputs

Operation

Keep us updated to keep you updated

Inputs specific to the Loss Management system

Example

Keep us updated to keep you updated

Inputs specific to the Loss Management system

\r\n\r\n
Trading sessions

\r\n\r\n
Trading sessions

Mercado fórex de robots comerciales, indicadores y aplicaciones de trading

Precio

Price M42 limited

Hunting for Bulls and Bears MT5

Charts symbol changer and synchronizer MT5

Stowell

Reversal Expert for MT5

Horizontal Channel Alert with Custom Fibo MT5

Exp5 Tester PAD for Strategy Tester

Check Execution

Panic Meter limited

TSO Total Top Bottom Divergence MT5

MMM Heiken Ashi

GS Trend5

Pm 42

MACD candles bars or lines

DG DayInfo

PZ Fibonacci MT5

IlanisMT5

SmartArrows

FFF Forts

TSO Top Bottom Divergence MACD MT5

TSO Top Bottom Divergence Momentum MT5

AllClosedMT5

Jack of all Trades MT5

CME CallPut Option Ratio MT5

FFx Pivot SR Suite Pro MT5

Virtual Orders Charting Demo

Virtual Orders Charting

MonsterDash Harmonic Indicator MT5

Currency Index Watcher

Level Alert

Smart Grid MT5

TSO Total Negative Management MT5

TSO Loss Management MT5

TSO Loss Management Lite MT5

TSO Order Recovery MT5

TSO Signal Builder MT5

Impro Martin

DG TrendSigns

Alpha Trend MT5

PZ Wedges MT5

Splash MT5

Trend Cruiser GT for CADCHF

ZoomIN MT5

Master Stochastic

AIS Probabilistic Price Levels MT5

Pivot Point MT5 Indicator by PipTick

HandyThing

Spadim Order Beep Email Notification

Fibonacci Retracement MT5 Indicator by PipTick

AIS Simple Linear Smoothing MT5

KVM Bitcoin Price Ticker Pro MT5

Infinite Currency Strength Meter All Pairs MT5

Exclusive Bollinger MT5

Predicting Donchian Channel MT5

PairsTrading MT5

Market Surfer Demo

PreMarket Calculations

CodEx

Break Day Range

Mr Big MT5

ADR ST Patterns Strategy

Fractals ST Patterns Strategy

Gekko Jade A Customizable EA

Gekko Parabolic SAR Plus

Quick Style MT5

EasyTrades

Gekko ADX Plus

Gekko RSI Plus

Simple Line for MQL5

PowerSignalMT5

PZ Pennants MT5

FFx Basket Scanner MT5