{ "from": 9216, "count": 72, "list": [ { "id": 34879, "title": "High Trend Lite MT5", "description": "

The indicator High Trend Lite monitors 5 symbols in up to 3 timeframes simultaneously and calculates the strength of their \r\nsignals. The indicator notifies you when a signal is the same in different timeframes. The indicator can do this from just one chart. \r\nTherefore, High Trend Lite is a multicurrency and multitimeframe indicator.

\r\n\r\n\r\n

\r\n With the High Trend Pro, available at this \r\n link, you will have an unlimited number of symbols, 4 timeframes, a colourful chart of the primary MACD \r\n indicator, several color schemes, and stop levels for each symbol. You can also move High Trend Pro inside the chart and get \r\n notified about strong signals on your email or your smart-phone via push-notifications. \r\n

\r\n

High Trend Lite uses emproved versions of popular and highly demanded indicators for calculating its signals.

\r\n

High Trend Lite calculates the signal strength for the 5 symbols simultaneously. Click the symbol button in the indicator \r\ninterface to quickly access its signal strength in all selected timeframes (up to 3 timeframes).

\r\n

It is recommended to open a trade when a signal has been confirmed by at least 2 timeframes. The indicator then notifies that it has found a Super \r\nbuy or a Super sell.

\r\n

Other signals pulled by the indicator are: Strong buy, Buy, Strong sell, Sell, Neutral or Loading. \r\nThese signals may change quickly, especially in the lower timeframes. That is why a strong signal is the one confirmed by at least 2 \r\ntimeframes.

\r\n

The indicator can notify about a strong signal with a sound bip.

\r\n

\r\n\r\n\r\n

How to use this indicator

\r\n\r\n

1. I recommend using 2 timeframes - H4 and D1.

\r\n

2. Your signal should be a Super buy or a Super sell as a result of these 2 timeframes going one direction.

\r\n

3. A signal should be at the start of the lowest timeframe, so for the first 1-2 hours of the H4 timeframe. If you see a signal at 3-4 hour of the H4 \r\ntimeframe, you should pass it and see if it is still confirmed in the next period. This confirmation is now possible because a signal may \r\ndevelop for 2 periods, so one signal in the first H4 and same signal in the next H4.

\r\n

4. Be careful with your profit. For example, USDCHF can make 50 (500) pips for one move. While many symbols based on GBP can make as much as 150 \r\n(1500) pips.

\r\n

\r\n\r\n\r\n

Indicator Properties

\r\n\r\n

Fontsize - choose a different font size to fit the indicator text to your screen resolution.

\r\n

Timeframe 1

\r\n

Timeframe 2

\r\n

Timeframe 3

\r\n

\r\n\r\n\r\n

Comments to buttons in the chart

\r\n\r\n

bip - switches on a sound alert.

\r\n

size - changes the panel size. An extended panel shows prices of a strong signal in the top right corner and its target price levels.

\r\n

toggle - toggles the panel.

\r\n

Click any symbol in the panel to show the information for all timeframes in the top. A dot on the left means that the top shows information for this \r\nsymbol.

\r\n

Click any timeframe in the top to switch to the chart of that symbol and timeframe. A dot on the left means that it is the current chart and \r\ntimeframe.

", "url": "https://www.mql5.com/it/market/product/34879", "small_icon": "https://c.mql5.com/31/298/high-trend-lite-mt5-logo-60x60-2130.png", "middle_icon": "https://c.mql5.com/31/446/high-trend-lite-mt5-logo-140x140-5543.png", "icon": "https://c.mql5.com/31/298/high-trend-lite-mt5-logo-200x200-9659.png", "rating": 5, "price": 0, "published": 1547576974, "popularity": 0.6162250446425199, "category": "Indicator", "votes": 1 }, { "id": 34724, "title": "Inside Days Candlestick Bulkowski", "description": "

Inside Days Candlestick Bulkowski

The Inside days candlestick is a well-known candle pattern composed of two candles.

This indicator for showing outside days candlestick that describe by Thomas Bulkowski.

If you need for MetaTrader 4 version, please visit here:

https://www.mql5.com/en/market/product/34725

Feature Highlights

Show inside days candlestick.
Customizable \"Symbol\".
Customizable symbol distance from candlestick.

Input Parameters

Symbol - Input symbol code from \"wingdings\" for inside days candlestick (default is dot).
SymbolShift - Input symbol distance from candlestick.
SymbolColor - Input color for symbol (inside days).

Inside Days Candlestick definition by Thomas Bulkowski:

Inside days are a two-bar pattern.
Look for a Lower High and Higher Low on the second day.
The price bar fits inside the prior day's range.
The last bar cannot have the high price equal to the low price or four price doji (open = high = low = close price).

", "url": "https://www.mql5.com/it/market/product/34724", "small_icon": "https://c.mql5.com/31/297/inside-days-candlestick-bulkowski-logo-60x60-3340.png", "middle_icon": "https://c.mql5.com/31/440/inside-days-candlestick-bulkowski-logo-140x140-1096.png", "icon": "https://c.mql5.com/31/297/inside-days-candlestick-bulkowski-logo-200x200-4686.png", "rating": 0, "price": 30, "published": 1547179764, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33639, "title": "PipFinite Breakout EDGE MT5", "description": "

The Missing Edge You Need To Catch Breakouts Like A Pro.

Follow a step-by-step system that detects the most powerful breakouts!

Discover market patterns that generate massive rewards based on a proven and tested strategy.

Unlock Your Serious Edge

Important information here ► www.mql5.com/en/blogs/post/723208

The Reliable Expert Advisor Version

Automate Breakout EDGE signals using \"EA Breakout EDGE\" ► Click Here

Have access to the game changing strategy that will take your trading to the next level.

Benefits You Get

Unique price action based algorithm that is proven to work on any market condition.
Powerful combination to any trading strategy.
Auto-detects entry, exit, stop loss & take profit levels.
Auto-calculates statistics of signals.
Never repaints, never backpaints, never recalculates.
Signals strictly on the \"Close of the bar\".
Works in any timeframe and financial instrument including forex, cryptocurrencies, metals, stocks, indices.
Integrated pop-up, email, push notification and sound alerts.
Indicator buffers fully compatible with Expert Advisor (EA) development.

How To Trade

Execute your trades in 3 Simple Steps!

Step 1: Ideal Trade Setup.

Enter a signal if Success Rate is at least 66% (Success Rate ≥ 66%)

Step 2: Set Stop Loss.

Option 1: Recent Swing - Stop loss calculated by the indicator.
Option 2: Opposite Signal.

Exit buy signal on a new sell signal.
Exit sell signal on a new buy signal.

Step 3: Set Take Profit.

Option 1: Take profit on TP1.
Option 2: Partial take profit on TP1 and close remaining position on TP2.
Option 3: Take profit on opposite signal to maximize strong breakouts.

Automatic Statistics Calculation

Reliable information that will give you the confidence in filtering your trades.

Win Condition

TP1 Hit - When a signal reaches at least TP1.
EXIT Win - When a trade is closed on opposite signal and resulted to a positive profit.

Loss Condition

SL Hit - when a signal reaches Stop Loss.
Exit Loss - When trade is closed on the opposite signal and resulted to a negative profit.

Success Rate

Percentage of signals which qualified for win condition.
Used as reference to find better pairs and timeframes.

Parameters

Period - the number of bars used to calculate the algorithm.
Range Filter - the factor used to filter ranging markets.
Stop Loss Mode - the stop loss used for calculation.

Recent Swing - the Indicator will place stoploss based on the recent swing highs and lows
Opposite Signal - there will be no stoploss but trades will be closed on the opposite signal.

Target Factor - the multiplier used to calculate take profit levels.
Maximum History Bars - maximum number of bars used for calculation.
Misc Parameters - controls the universal visibility of objects and buffers.
Display Parameters - controls the visibility of objects drawn on chart.
Graphics Parameters - controls the appearance and colors of drawn objects on chart.
Dashboard Parameters - controls the visibility and colors of statistics found on chart.
Alert Parameters - controls the alert options enabled.

User Manual

For more information ► Click Here", "url": "https://www.mql5.com/it/market/product/33639", "small_icon": "https://c.mql5.com/31/295/pipfinite-breakout-edge-mt5-logo-60x60-8059.png", "middle_icon": "https://c.mql5.com/31/446/pipfinite-breakout-edge-mt5-logo-140x140-5423.png", "icon": "https://c.mql5.com/31/295/pipfinite-breakout-edge-mt5-logo-200x200-8820.png", "rating": 4.806452, "price": 98, "published": 1547004560, "popularity": 19.563557931059908, "category": "Indicator", "votes": 93 }, { "id": 34460, "title": "High Trend MT5", "description": "

The indicator High Trend Pro monitors a big number of symbols in up to 4 timeframes simultaneously and calculates the strength of their signals. The indicator notifies you when a signal is the same in different timeframes. The indicator can do this from just one chart. Therefore, High Trend Pro is a multicurrency and multitimeframe indicator.

High Trend Pro uses emproved versions of popular and highly demanded indicators for calculating its signals.

High Trend Pro calculates the signal strength for all selected symbols. Click the symbol button in the indicator interface to quickly access its signal strength in all selected timeframes (up to 4 timeframes).

The first start of the indicator with more than 10 symbols may require several seconds to load all data. From then on, the indicator works correctly with all symbols in one chart.

It is recommended to open a trade when a signal has been confirmed by at least 2 timeframes. The indicator then notifies that it has found a Super buy or a Super sell.

Other signals pulled by the indicator are: Strong buy, Buy, Strong sell, Sell, Neutral or Loading. These signals may change quickly, especially in the lower timeframes. That is why a strong signal is the one confirmed by at least 2 timeframes.

The indicator can notify about a strong signal with a sound bip or a push-notification. You will need to set up push notifications in the menu of MetaTrader.

How to use this indicator

1. I recommend using 2 timeframes - H4 and D1.

2. Your signal should be a Super buy or a Super sell as a result of these 2 timeframes going one direction.

3. A signal should be at the start of the lowest timeframe, so for the first 1-2 hours of the H4 timeframe. If you see a signal at 3-4 hour of the H4 timeframe, you should pass it and see if it is still confirmed in the next period. This confirmation is now possible because a signal may develop for 2 periods, so one signal in the first H4 and same signal in the next H4.

4. Be careful with your profit. For example, USDCHF can make 50 (500) pips for one move. While many symbols based on GBP can make as much as 150 (1500) pips.

Indicator Properties

Color preset - you can choose from four.

Fontsize

Notify mode - Push, Print, Print_and_Push or Muted. A push notification is sent to your smartphone if you set it up. Printing is done to the \"Experts\" tab.

Notify interval (minutes) - number of minutes after which push notifications about strong signals to your smartphone are sent. Set up push settings via the menu \"Tools > Options > Notifications\".

Symbols source - there are 2 options: Market_Watch or Custom_List. For the Market_Watch, the indicator monitors and looks for signals for all the symbols currently started in the Market Watch window. For the Custom_List, it is for all symbols listed in the property Symbols custom list.

Symbols custom list - it is a comma-separated list of your symbols which the indicator monitors and for which it looks for signals. You need to choose Custom_List for the property Symbols source.

Timeframe 1

Timeframe 2

Timeframe 3

Timeframe 4

Global stoploss - minimal distance from the current price, after which the High Trend Pro tries to find a stoploss level by the nearest bar extrema in the current chart. Use pips.

Global takeprofit - minimal distance from the current price, after which the High Trend Pro tries to find a takeprofit level by the nearest bar extrema in the current chart. Use pips.

", "url": "https://www.mql5.com/it/market/product/34460", "small_icon": "https://c.mql5.com/31/298/high-trend-mt5-logo-60x60-9671.png", "middle_icon": "https://c.mql5.com/31/440/high-trend-mt5-logo-140x140-7049.png", "icon": "https://c.mql5.com/31/298/high-trend-mt5-logo-200x200-6951.png", "rating": 0, "price": 45, "published": 1546728418, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34505, "title": "KT Psar Arrows MT5", "description": "

KT Psar Arrows traccia frecce sul grafico utilizzando l'indicatore standard Parabolic SAR. Una freccia rialzista viene tracciata quando il massimo della candela tocca il SAR. Una freccia ribassista viene tracciata quando il minimo della candela tocca il SAR. I segnali vengono generati in tempo reale senza attendere la chiusura della candela.

Funzionalità

Uno strumento utile per i trader che desiderano sperimentare strategie di trading che includono l'uso dell'indicatore Parabolic SAR.
Può essere utilizzato per individuare punti di inversione del mercato.
Supporta l'inserimento di parametri personalizzati per il PSAR.
Disponibili tutti gli avvisi standard di MT4.

Nota: il Parabolic SAR è un indicatore ritardato e strettamente meccanico. Ogni operazione potenziale dovrebbe essere filtrata tramite regole ben definite.

Parametri di input

Passo PSAR: Inserire il valore del passo.
Massimo PSAR: Inserire il valore massimo.
Mostrare i punti PSAR: Mostrare/nascondere i punti PSAR. Le frecce funzioneranno normalmente anche senza la visualizzazione dei punti.
Il resto dei parametri è autoesplicativo.

", "url": "https://www.mql5.com/it/market/product/34505", "small_icon": "https://c.mql5.com/31/295/kt-psar-arrows-mt5-logo-60x60-8756.png", "middle_icon": "https://c.mql5.com/31/441/kt-psar-arrows-mt5-logo-140x140-4381.png", "icon": "https://c.mql5.com/31/295/kt-psar-arrows-mt5-logo-200x200-9603.png", "rating": 5, "price": 30, "published": 1546637811, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 34447, "title": "KT Auto Fibo MT5", "description": "

KT Auto Fibo traccia automaticamente i livelli di ritracciamento di Fibonacci basandosi sulla direzione della tendenza in corso. I massimi e i minimi vengono selezionati automaticamente utilizzando i punti massimi e minimi disponibili sul grafico. Puoi ingrandire, ridurre e scorrere il grafico per regolare i livelli di Fibonacci di conseguenza.

Modalità

Automatico: Traccia automaticamente i livelli di Fibonacci in base all'area visibile del grafico.
Manuale: Traccia i livelli di Fibonacci una sola volta. Successivamente puoi modificare manualmente i punti di ancoraggio.

Utilizzo:

Aiuta a prevedere logicamente i futuri obiettivi di profitto.
Fornisce un'alta probabilità di inversione se combinato con supporti/resistenze o linee di tendenza.
Offre ingressi a basso rischio nei mercati in tendenza.

Parametri di input

Automatico: Traccia i livelli di ritracciamento di Fibonacci senza intervento umano.
Manuale: Traccia i livelli di ritracciamento di Fibonacci una sola volta. Successivamente puoi allungare i punti di ancoraggio manualmente.
Mostra area non ritestata: Mostra/nasconde sul grafico l'area che non è ancora stata ritestata dal prezzo.
Il resto degli input è autoesplicativo.

", "url": "https://www.mql5.com/it/market/product/34447", "small_icon": "https://c.mql5.com/31/295/kt-auto-fibo-mt5-logo-60x60-8518.png", "middle_icon": "https://c.mql5.com/31/441/kt-auto-fibo-mt5-logo-140x140-9243.png", "icon": "https://c.mql5.com/31/295/kt-auto-fibo-mt5-logo-200x200-1278.png", "rating": 5, "price": 30, "published": 1546466298, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 34427, "title": "KT Pin Bar MT5", "description": "

KT Pin Bar identifies the pin bar formation which is a type of price action pattern which depicts a sign of reversal or rejection of the trend. When combined with support and resistance, BRN and other significant levels, Pin Bar pattern proved to be a very strong sign of reversal.

Basically, a pin bar is characterized by a small body relative to the bar length which is closed either in upper or lower 50% part of its length. They have very large wicks and small candle body.

A pin bar candlestick can be bullish or bearish, but as long as its structure meets the characters of perfect pin bar, the color of the candle doesn't really matter.

\r\n

MT4 version of the same indicator is available here KT Pin Bar MT4

Features

Depicts significant reversal points near Support/Resistance level.
Suitable for swing trading strategies.
Define the candle max. and min. size in pips.
Alerts included.

Input Parameters

Pin Bar Depth: Define the nose to body ratio in percentage.
Max. Range in Pips: Max. size for the pin bar.
Min. Range in Pips: Min. size for the pin bar.
Rest of the inputs are self-explanatory.

", "url": "https://www.mql5.com/it/market/product/34427", "small_icon": "https://c.mql5.com/31/294/kt-pin-bar-mt5-logo-60x60-4357.png", "middle_icon": "https://c.mql5.com/31/440/kt-pin-bar-mt5-logo-140x140-7897.png", "icon": "https://c.mql5.com/31/294/kt-pin-bar-mt5-logo-200x200-6106.png", "rating": 0, "price": 30, "published": 1546438832, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34406, "title": "Outside Days Candlestick Bulkowski", "description": "

Outside Days Candlestick Bulkowski

\r\n

The Outside days candlestick is a well-known candle pattern composed of two candles.

This indicator for showing outside days candlestick that describe by Thomas Bulkowski.

\r\n

If you need for MetaTrader 4 version, please visit here:

\r\n

https://www.mql5.com/en/market/product/34411

\r\n

Feature Highlights

Show outside days candlestick.
Customizable \"Symbol\".
Customizable symbol distance from candlestick.

Input Parameters

Symbol - Input symbol code from \"wingdings\" for outside days candlestick (default is dot).
SymbolShift - Input symbol distance from candlestick.
SymbolColor - Input color for symbol (outside days).

Outside Days Candlestick definition by Thomas Bulkowski:

\r\n

Outside days are a two-bar pattern.
Look for a higher high and lower low on the second day.
The price bar fits outside the prior day's range.
The first bar cannot have the high price equal to the low price or four price doji (open = high = low = close price).

\r\n

", "url": "https://www.mql5.com/it/market/product/34406", "small_icon": "https://c.mql5.com/31/294/outside-days-candlestick-bulkowski-logo-60x60-9615.png", "middle_icon": "https://c.mql5.com/31/440/outside-days-candlestick-bulkowski-logo-140x140-8750.png", "icon": "https://c.mql5.com/31/294/outside-days-candlestick-bulkowski-logo-200x200-4299.png", "rating": 0, "price": 30, "published": 1546408721, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34390, "title": "My Big Bars MT5", "description": "

The indicator My Big Bars can show bars (candles) of a higher timeframe. If you open an H1 (1 hour) chart, the indicator puts underneath a chart of H3, H4, H6 and so on.

The following higher timeframes can be applied: M3, M5, M10, M15, M30, H1, H3, H4, H6, H8, H12, D1, W1 and MN.

The indicator chooses only those higher timeframes which are multiple of the current timeframe. If you open an M2 chart (2 minutes), the higher timeframes exclude M3, M5 and M15.

There are 2 handy buttons in the lower right corner. The right button always shows the current higher timeframe. Click it to switch to the next higher timeframe. The left button appears if there is a higher timeframe which is less than the current. This way you can easily switch among the higher timeframes.

A higher timeframe may be delayed when you click the button and there is no available history for the moment.

2 properties of the indicator allow to set the colors for the growing bar and the falling bar.

", "url": "https://www.mql5.com/it/market/product/34390", "small_icon": "https://c.mql5.com/31/294/my-big-bars-mt5-logo-60x60-2662.png", "middle_icon": "https://c.mql5.com/31/441/my-big-bars-mt5-logo-140x140-3059.png", "icon": "https://c.mql5.com/31/294/my-big-bars-mt5-logo-200x200-9464.png", "rating": 4.5833335, "price": 0, "published": 1546360436, "popularity": 0.9111073461478048, "category": "Indicator", "votes": 12 }, { "id": 34270, "title": "Pivot MT5", "description": "

The indicator draws daily support and resistance lines on the chart, as well as the Pivot level (reversal level).

Adapted to work in MT5

The standard timeframe for calculating support and resistance levels is D1.

You can choose other timeframes according to your strategy (for example, for M1-M15, the optimal timeframe for calculations is H1)

The function for calculating support and resistance levels has been updated; in this calculation option, fibonacci levels are taken into account, respectively, for each of the timeframes.

Indicator parameters:

Period_TF - timeframe for calculating support and resistance levels

", "url": "https://www.mql5.com/it/market/product/34270", "small_icon": "https://c.mql5.com/31/293/pivot-mt5-logo-60x60-5443.png", "middle_icon": "https://c.mql5.com/31/441/pivot-mt5-logo-140x140-9436.png", "icon": "https://c.mql5.com/31/293/pivot-mt5-logo-200x200-2338.png", "rating": 0, "price": 0, "published": 1546025203, "popularity": 0.7882389172611219, "category": "Indicator", "votes": 0 }, { "id": 34182, "title": "Crossover System", "url": "https://www.mql5.com/it/market/product/34182", "small_icon": "https://c.mql5.com/31/292/crossover-system-logo-60x60-7882.png", "middle_icon": "https://c.mql5.com/31/440/crossover-system-logo-140x140-9253.png", "icon": "https://c.mql5.com/31/292/crossover-system-logo-200x200-5129.png", "rating": 0, "price": 30, "published": 1545765601, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34183, "title": "Engulfing Candlestick Bulkowski", "description": "

Engulfing Candlestick Bulkowski

The engulfing candlestick is a well-known candle pattern composed of two candles.

This indicator for showing engulfing candlestick that describe by Thomas Bulkowski.

\r\n

If you need for MetaTrader 4 version, please visit here:

\r\n

https://www.mql5.com/en/market/product/34193

\r\n

Feature Highlights

Show bullish engulfing and bearish engulfing.

Customizable \"Up Symbol\".
Customizable \"Down Symbol\".
Customizable symbol distance from candlestick.
Customizable \"Down Color\".
Customizable \"Up Color\".

\r\n\r\n

Input Parameters

UpSymbol - Input symbol code from \"wingdings\" for bullish engulfing (default is arrow up).
DownSymbol - Input symbol code from \"wingdings\" for bearish engulfing (default is arrow down).
SymbolShift - Input symbol distance from candlestick.
DownColor - Input color for down symbol (bearish engulfing).
UpColor - Input color for up symbol (bullish engulfing).

Engulfing Candlestick definition by Thomas Bulkowski:

Bullish Engulfing

The first is a bearish candle followed by a bullish candle.
The bullish candle should have a close above the prior open and an open below the prior close.
In other words, the body of the bullish candle should engulf or overlap the body of the bearish candle.
Ignore the shadows. Shadows are unimportant.

Bearish Engulfing

The first is a bullish candle followed by a bearish candle.
The bearish candle should have a close below the prior open and an open above the prior close.
In other words, the body of the bearish candle should engulf or overlap the body of the bullish candle.
Ignore the shadows. Shadows are unimportant.

", "url": "https://www.mql5.com/it/market/product/34183", "small_icon": "https://c.mql5.com/31/292/engulfing-candlestick-bulkowski-logo-60x60-8142.png", "middle_icon": "https://c.mql5.com/31/440/engulfing-candlestick-bulkowski-logo-140x140-5796.png", "icon": "https://c.mql5.com/31/292/engulfing-candlestick-bulkowski-logo-200x200-9078.png", "rating": 0, "price": 30, "published": 1545750156, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34093, "title": "KT COG Advanced MT5", "description": "

KT COG is an advanced implementation of the center of gravity indicator presented by John F. Ehlers in the May 2002 edition of Technical Analysis of Stocks & Commodities magazine.

It's a leading indicator which can be used to identify the potential reversal points with the minimum lag. The COG oscillator catches the price swings quite effectively.

\r\n

MT4 version of the same indicator is available here KT COG Advanced MT4

Calculation of COG

The COG indicator is consist of the two lines. The main line is based on the following formula

COG Line: -Sum(Time Series[i] * (i + 1)) / Sum(Time Series[i])

Signal Line: A moving average plotted on the COG line.

A buy signal is generated when the COG line crosses above the signal line and a sell signal is generated when the COG line crosses below the signal line.

Please note that the COG is a leading indicator. For profitable trading, each crossover cannot be used as the buy/sell signal. There is a need for adaptive filtration before this oscillator can be used for practical trading.

Advanced Filtration

Our adaptive filtration algorithm combines the original COG formula with the major trend direction and market acceleration/deceleration. The end result of such combination is that we get a smooth leading indicator in which the crossover can be used as the buy/sell signals.

Features

Very good for the scalping on smaller time frames such as M1, M5 etc.
Catches reversal points earlier with the minimum lag.
Buy/Sell dots at each crossover for signal generation.
Performance analysis metrics such as Win/Loss, Success rate, Avg. Profit etc.
Can be combined and used as a filter with other indicators

Input Parameters

COG Period: The period used for the calculation of main COG line.
Smoothing Period: The period used for the calculation of signal line.
Smart Filtration: Set the smart filtration true or false for the crossover signals.
Performance Analysis: Set the performance analysis true or false.
Draw Signal Dots: You can turn on/off the dots drawn at each crossover. Don't worry, even if you choose to not draw the signal dots, you'll still receive the alert for each crossover.

", "url": "https://www.mql5.com/it/market/product/34093", "small_icon": "https://c.mql5.com/31/291/kt-cog-advanced-mt5-logo-60x60-1951.png", "middle_icon": "https://c.mql5.com/31/438/kt-cog-advanced-mt5-logo-140x140-4540.png", "icon": "https://c.mql5.com/31/291/kt-cog-advanced-mt5-logo-200x200-1413.png", "rating": 0, "price": 30, "published": 1545423411, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 34109, "title": "Simple Weis Wave", "description": "

\r\n One of the best tools for analyzing volume, \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n Weis Wave was idelized by David Weis, to facilitate the reading of directional flow. For the VSA method disciples it is an evolution of the \r\n practices created by Richard Wycoff, facilitating a predictive reading of the market, always seeking an accumulation and \r\n distribution of the negotiated contracts. \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n

Cumulative wave volume

\r\n

Range of wave ( removed)

\r\n

\r\n\r\n\r\n

\r\n Average Wave volume Ref \"Tim Ord lectures\" ( removed)\r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n
\r\n

", "url": "https://www.mql5.com/it/market/product/34109", "small_icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-60x60-4468.png", "middle_icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-140x140-2661.png", "icon": "https://c.mql5.com/31/671/simple-weis-wave-logo-200x200-5150.png", "rating": 3.6666667, "price": 0, "published": 1545419088, "popularity": 1.1832801816202663, "category": "Indicator", "votes": 3 }, { "id": 32912, "title": "KT Momentum Arrows MT5", "description": "

L'indicatore KT Momentum Arrows si basa su una rottura momentanea calcolata utilizzando la deviazione delle bande e la volatilità emergente in una determinata direzione.

Un segnale di acquisto viene generato quando il prezzo chiude al di sopra della banda superiore, mentre un segnale di vendita viene generato quando chiude al di sotto della banda inferiore.

Viene utilizzato un coefficiente di magnitudo come input, che influenza sia la deviazione delle bande sia la misurazione della volatilità. Il valore deve essere scelto con attenzione in base allo strumento e al time frame.

Caratteristiche principali

Senza repaint!
Ottimo strumento di ingresso per i trader che operano sul momentum.
Include analisi delle performance: win/loss, tasso di successo, profitto medio e altro.
Adatto a Day Trader, Swing Trader e Scalper.

Parametri di input

Barre storiche: Numero di barre utilizzate per il calcolo dell’indicatore.
Coefficiente di magnitudo: Un coefficiente per regolare la deviazione delle bande e la volatilità.
Analisi delle performance: Mostra/nasconde l’analisi, incluse le linee di tendenza del profitto.
Impostazioni avvisi: Avvisi popup, email, notifiche push e suono disponibili.
Il resto dei parametri è autoesplicativo.

", "url": "https://www.mql5.com/it/market/product/32912", "small_icon": "https://c.mql5.com/31/280/kt-momentum-arrows-mt5-logo-60x60-9265.png", "middle_icon": "https://c.mql5.com/31/441/kt-momentum-arrows-mt5-logo-140x140-7004.png", "icon": "https://c.mql5.com/31/280/kt-momentum-arrows-mt5-logo-200x200-7157.png", "rating": 5, "price": 75, "published": 1545339447, "popularity": 60.90542063848578, "category": "Indicator", "votes": 2 }, { "id": 34071, "title": "Blahtech Moving Average MT5", "description": "

Blahtech Moving Average indicator is a multitimeframe version of the standard Moving Average indicator. It is also enhanced with customisable alerts, period breaks and other configuration options.

The 50 day and 200 day moving averages are widely followed by investors and traders, with breaks above and below the MA lines considered to be signals of interest.

Links [ Install | Update | Training | All Products ]

Feature Highlights

Up to three timeframes
Configurable calculation variables
Customisable alerts and messages
Optional period breaks

Input Parameters

Timeframe 1

Visible - Display Moving Average on the chart

Visible - Display Moving Average for the period for this timeframe
Timeframe - Choose the period for this timeframe
Averaging Period - Number of iterations to use for the calculation
Shift (calc timeframe) - Offset the calculations by a number of bars
Method - Averaging method to use

Simple
Exponential
Smoothed
Linear-Weighted

Apply To - Price to use

Close
Open
High
Low
Median
Typical
Weighted Close

Show Period Breaks - Display gap in line at the period breaks (higher timeframes only)
Alerts - Enable alerts for this timeframe

Timeframe 2

Same as Timeframe 1

Timeframe 3

Same as Timeframe 1

Other parameters

Alerts -Popup - Enable/disable sound and popup dialog for active alerts

Disabled
Sound Only
Popup and Sound

Alerts - Email - Enable/disable email for active alerts
Alerts - Notification - Enable/disable notifications for active alerts
Alerts - Signal Bar - Set the bar that is used to trigger the alerts
Alerts - Sound Wav File - Set the wav file to be used for alerts
Alerts - Message Text - Configure the popup and notification alert message text
Alerts - Email - Subject - Configure the email alert subject
Alerts - Email - Body - Configure the email alert body
Hot Keys Map - Allows the user to reassign the hot-keys

“C” Clears all Blahtech indicator graphics from the chart. Pressing “C” again brings them back
“R” Resets the indicator. (Backtest mode and any hot-key values are reset)

Hot Keys Reserved Keys - Define a list of keys that will stop clashes with hotkeys from other products
Shift (chart timeframe) - Offset all timeframes displayed on chart by a number of bars (current timeframe)
Show Buffers In Data Window - Show or Hide the iCustom Buffers in the Data window

Developers - iCustom buffers

Moving Average - Timeframe 1
Moving Average - Timeframe 2
Moving Average - Timeframe 3

", "url": "https://www.mql5.com/it/market/product/34071", "small_icon": "https://c.mql5.com/31/291/blahtech-moving-average-mt5-logo-60x60-9520.png", "middle_icon": "https://c.mql5.com/31/438/blahtech-moving-average-mt5-logo-140x140-5213.png", "icon": "https://c.mql5.com/31/291/blahtech-moving-average-mt5-logo-200x200-7221.png", "rating": 5, "price": 0, "published": 1545290910, "popularity": 2.827814941580332, "category": "Indicator", "votes": 3 }, { "id": 34070, "title": "Blahtech Fisher Transform MT5", "description": "

Blahtech Fisher Transform indicator is an oscillator that displays overbought and oversold locations on the chart. The Fisher Transform algorithm transforms prices with any distribution shape into a normal distribution. The end result is a curve with sharp turning points that may help to identify bullish or bearish trends.

Fisher Transform values exceeding 1.66 on the daily chart are considered to be good areas for reversal trades.

Links [ Install | Update | Training | All Products ]

Feature Highlights

Configurable calculation variables
Customizable alerts and messages

Input Parameters

Periods - Number of candles back to use for the calculation
Apply To - Price to use

Close
Open
High
Low
Median
Typical
Weighted Close

Shift - Offset display on chart by a number of bars
Alert Level High - Set the high trigger level
Alert Level Low - Set the low trigger level
Alerts -Popup - Enable/disable sound and popup dialog for active alerts

Disabled
Sound Only
Popup and Sound

Alerts - Email - Enable/disable email for active alerts
Alerts - Notification - Enable/disable notifications for active alerts
Alerts - Sound Wav File - Set the wav file to be used for alerts
Alerts - Message Text - Configure the popup and notification alert message text
Alerts - Email - Subject - Configure the email alert subject
Alerts - Email - Body - Configure the email alert body
Show Data Buffers - Show the iCustom Buffers in the Data window

Developers - iCustom buffers

Fisher
Trigger

", "url": "https://www.mql5.com/it/market/product/34070", "small_icon": "https://c.mql5.com/31/291/blahtech-fisher-transform-mt5-logo-60x60-6004.png", "middle_icon": "https://c.mql5.com/31/447/blahtech-fisher-transform-mt5-logo-140x140-1964.png", "icon": "https://c.mql5.com/31/291/blahtech-fisher-transform-mt5-logo-200x200-7217.png", "rating": 0, "price": 33, "published": 1545290881, "popularity": 0.8931088892185938, "category": "Indicator", "votes": 0 }, { "id": 34061, "title": "Hi Low Last Day", "description": "

The Hi Low Last Day (Hi Lo Last Day) indicator shows the high and low of the last trading day and the second trading day, as well as the minimum and maximum of last week .

There are many trading strategies on the daily levels. This indicator is indispensable when using such trading strategies.

In fact, everything is simple in trading, you just need to understand and accept it for yourself. There is only price!!! What is price? This is the level on the chart. The level is the price that the buyer and the seller are holding back. What price is capped by the counterparty? A price he won't sell or buy. Therefore, daily levels are very important. To help you understand the situation in the market, use the Hi Low Last Day indicator, which will help determine the mood of the market in the current day.

The Hi Low Last Day indicator has flexible settings:

Line color
Line width
Line style
how to display (the length of the lines)
Passed today ATR
The ATR period
To show the second day
The second day
Last Week's Setup

The indicator requires very little system resources and does not load the terminal.

", "url": "https://www.mql5.com/it/market/product/34061", "small_icon": "https://c.mql5.com/31/292/hi-low-last-day-logo-60x60-9992.png", "middle_icon": "https://c.mql5.com/31/438/hi-low-last-day-logo-140x140-2043.png", "icon": "https://c.mql5.com/31/292/hi-low-last-day-logo-200x200-9013.png", "rating": 0, "price": 30, "published": 1545252666, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33971, "title": "TeaCii Auto Fibonacci MTF", "description": "

TeaCii Auto Fibonacci MTF is an implementation of Fibonacci Levels

\r\n

The indicator is simple and yet more powerful than those in the market

\r\n

IMPORTANT: UNIQUE SELLING POINTS

- The Levels are set automatically

- You can see ANY TIMEFRAME Levels in ANY Chart. E.g. Watch H1 on M1. Watch M1 on H1

- The Levels are available in Buffers for EA Use

- Helps you to get an edge early in by using multi timeframe

\r\n

Parameters

\r\n

TimeFrame : The timeframe of the indicator. It can be same, higher or lower than the charts timeframe. When using lower TF on higher TF chart, it is recommended to have a high lookback bars number.

\r\n

Lookback Bars : The only most important parameter. The highs and the lows will be based on this many bars.

\r\n

Line Length : This is purely cosmetic. It is the width of the line.

\r\n

Background Color : Again purely cosmetic. You may want to highlight the zone.

\r\n

", "url": "https://www.mql5.com/it/market/product/33971", "small_icon": "https://c.mql5.com/31/290/teacii-auto-fibonacci-mtf-logo-60x60-5090.png", "middle_icon": "https://c.mql5.com/31/444/teacii-auto-fibonacci-mtf-logo-140x140-1950.png", "icon": "https://c.mql5.com/31/290/teacii-auto-fibonacci-mtf-logo-200x200-2087.png", "rating": 0, "price": 60, "published": 1545027920, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33964, "title": "SC MTF Obv for MT5 with alert", "description": "Highly configurable OBV indicator.

Features:

Highly customizable alert functions (at levels, crosses, direction changes via email, push, sound, popup)
Multi timeframe ability
Color customization (at levels, crosses, direction changes)
Linear interpolation and histogram mode options
Works on strategy tester in multi timeframe mode (at weekend without ticks also)
Adjustable Levels

Parameters:

OBV Timeframe: You can set the lower/higher timeframes for OBV.
OBV Bar Shift: You can set the offset of the line drawing
OBV Period / Applied Price: OBV parameters.
Stepless (Linear Interpolation): Turn on/off the linear interpolation (with multi timeframe mode on lower timeframe).
Shows Level: Turn on/off the level showing.
Adjust a Level of OBV: Adjust a OBV level.
Enable or Disable All Alert Functions: Turn on/off all alert functions.
Alert if... : You can enable/disable various alert events (for crosses, direction changes at after candle closed/before candle closes).
A Short Message for You to Identity This Indicator Instance: Specify a short message for you to identity which indicator alerted.
Alert with Email: Switchable alert mode.
Alert with Push Notification: Switchable alert mode.
Alert with Popup Window: Switchable alert mode.
Alert with Sound: Switchable alert mode.
Choose Sound File for Sound Alert: Select sound file for sound alert.
Color Mode: Switchable color mode (Simple Color, Cross, Cross After Closed, Cross On Selected Timeframe, Cross After Closed on Selected Timeframe, Only direction, Direction with levels, Only Levels)
Draw OBV Line in Histogram Mode: Draws OBV Line with line or histogram mode.
Color 1 of OBV Line, Color 2 of OBV Line, Color 3 of OBV Line, Color 4 of OBV Line: Set colors.
Width of OBV Line: Style setting.
Style of OBV Line: Style setting.

", "url": "https://www.mql5.com/it/market/product/33964", "small_icon": "https://c.mql5.com/31/290/sc-mtf-obv-for-mt5-with-alert-logo-60x60-6563.png", "middle_icon": "https://c.mql5.com/31/446/sc-mtf-obv-for-mt5-with-alert-logo-140x140-1534.png", "icon": "https://c.mql5.com/31/290/sc-mtf-obv-for-mt5-with-alert-logo-200x200-6349.png", "rating": 5, "price": 0, "published": 1544999224, "popularity": 0.5522313194003413, "category": "Indicator", "votes": 2 }, { "id": 33893, "title": "Market Sentiment for MT5", "description": "

Market Sentiment is an indicator for MT5.

Market sentiment is the feeling or tone of a market. Also called investor sentiment, it is generally described as being bullish or bearish :

When bulls are in control, prices are going up.
When bears are in control, prices are going down.

Markets being driven by emotions, the market sentiment is about feelings whereas fundamental value is about business performance.

Settings :

Range in bars : numbers of bars used for the calculation, at your own convenience, default is 100
Price averaging's period : period for averaging prices, at your own convenience, default is 13
Show signals : will show an arrow for buy & sell opportunities, at your own convenience, default is true

Buffers :

0 : Bulls in % (always positive, ie. 75.5%)
1 : Bears in % (always negative, ie. -24.5%)
2 : Long entry, non-null is a signal (always -90)
3 : Short entry, non-null is a signal (always 90)

NB 1 : Bulls + MathAbs(Bears) = 100%

NB 2 : -90 & 90 has been chosen arbitrarily in a graphical purpose.

", "url": "https://www.mql5.com/it/market/product/33893", "small_icon": "https://c.mql5.com/31/290/market-sentiment-for-mt5-logo-60x60-9350.png", "middle_icon": "https://c.mql5.com/31/445/market-sentiment-for-mt5-logo-140x140-2134.png", "icon": "https://c.mql5.com/31/290/market-sentiment-for-mt5-logo-200x200-2204.png", "rating": 0, "price": 30, "published": 1544740610, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33859, "title": "HV Models", "description": "

HV Models is an Indicator that containes 4 methods for calculating historical volatility of the selected asset.

\r\n

Volatility is one of the fundamental values describing changes in the underlying asset. In statistics, it usualy describes as a standard deviation. The price chart has 4 values (Open High Low Close) when we calculate volatility using a standard indicator, only one of these values is used as a result we get one-sided volatility picture. The presented indicator uses 4 volatility calculation formulas developed specifically for financial markets:

\r\n

Simple:

When choosing this mode, first of all we calculate logrifmic increments by closing price which allows filtering out the trend, seasonality and other inclusions that spoil the volatility picture. then calculates standard deviation - volatility by logrifmic increments.

\r\n

Garman - Klass:

This variant of volatility takes into account intraday fluctuations in price, unlike the previous version, it focuses on the measurement of candlestick volatility.

Rogers-Satchell

This variant just like the previous version of volatility takes into account the measurement of candle volatility, however this method, compared to the previous one emphasis is placed on measuring each of the price fluctuations (H / C, H / O, LC, LO) - which gives more detailed measurement.

\r\n

Yang-Zhang

\r\n

This method combines all the previously described types of volatility calculations. It measures volatility both within the day and in relation to the previous day.

\r\n

The indicator allows to recalculate volatility from the current timeframe to another one. For example to get annual volatility frome daily volatility parameter \"Calendar Amendment\" must be equals to 365 (dayse per year). To recalculate minute volatility to one year volatiolity paranetr Calendar Amendment mast be equal to 525600. This number was found using following formula: (24 (hours per day) * 60 (minutes per hour) * 365 (days per year)). If this parameter equals 1, the recalculation is not performed and the volatility is shown for the selected timeframe.

\r\n

For those who will use the indicator in EA - the indicator has 2 buffers, however the indicator itself is stored in a buffer with a zero index.

\r\n

", "url": "https://www.mql5.com/it/market/product/33859", "small_icon": "https://c.mql5.com/31/289/hv-models-logo-60x60-9240.png", "middle_icon": "https://c.mql5.com/31/441/hv-models-logo-140x140-8466.png", "icon": "https://c.mql5.com/31/289/hv-models-logo-200x200-9065.png", "rating": 0, "price": 30, "published": 1544657729, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33692, "title": "Rsi Magic kjuta mql5 trial", "description": "\r\n\r\n

RSI magic\r\nkjuta trial is the demo version of RSI magic kjuta.

\r\n\r\n

Custom\r\nIndicator (RSI magic kjuta) based on the standard (Relative Strength Index, RSI) with additional\r\nsettings and functions.

\r\n\r\n

The maximum\r\nand minimum RSI lines on the chart have been added to the standard RSI line.\r\nNow you can visually observe the past highs and lows of RSI, and not only the\r\nvalues of the closing bars, which avoids confusion in the analysis of trades.\r\nFor example, the EA opened or closed an order, but the RSI line does not reach\r\nthe trigger value on the chart. This is due to the fact that the RSI value\r\nreached this value, but then fell or rose to the level of closing the bar. This\r\nis especially evident on the lines of high and low at peak prices, with candles\r\nin one bar. Orientation to the value of these lines allows you to more\r\nrealistically set the trigger levels or conduct manual trading.

\r\n\r\n

Added\r\nsetting of the shear bar (shiftBas). The value of positive and negative price\r\nchanges is taken not only from the previous closing value as in the standard\r\nRSI, but by the set value, which leads to a shift in the RSI swing levels at\r\nsmall values. For large values of the shear bar (shiftBas) and you need to do\r\nis probably to set the values of TP and Lots. When setting, the value\r\n(shiftBas) should not be greater than the period value. Recommended period 14.

\r\n\r\n

The RSI\r\nswing ratio function from the average bar value (coeffMagnitude) allows you to\r\nautomatically reduce the swing at small bar sizes (for example, when volatility\r\ndecreases in the Asian session or between sessions) and increase the swing at\r\nhigh bars. Period (periodCoeff) default day (24 hours). The sampling Period\r\nvalue (sampling period) is set in bars. \r\nThe increase in the range (scope) is the value of the degree of the\r\ndifference between the average value for (periodCoeff) and (sampling period),”\r\n(sampling period/ periodCoeff)^ (scope)”. On the more chart timeframes M30\r\nfunction (coeffMagnitude) to include not recommended.

\r\n\r\n

The value\r\nof the minimum period RSI (minRSIPeriod) ј limits the scope to the values for\r\nthis period (for example, when (minRSIPeriod= InpRSIPeriod)- will decrease the\r\nscope only at low volatility).

\r\n\r\n

To select\r\nthe desired settings, it is best to load several indicators with the Service\r\nfunctions turned off and different input parameters on the chart, save them to\r\nthe template and load this template after the strategy tester is launched. This\r\nwill help you to quickly select the optimal indicator parameters for you.

\r\n\r\n

Service function.

\r\n\r\n

These are\r\nsignal lines, when reaching the RSI or time values, an audible signal is heard\r\nand the time to the end of the bar and the server time. Included in the input\r\nparameters. Variable (chartBlackWhite) includes the previous color scheme of\r\nthe chart.

\r\n\r\n

Successful trading.

\r\n\r\n", "url": "https://www.mql5.com/it/market/product/33692", "small_icon": "https://c.mql5.com/31/288/rsi-magic-kjuta-mql5-trial-logo-60x60-4407.png", "middle_icon": "https://c.mql5.com/31/441/rsi-magic-kjuta-mql5-trial-logo-140x140-5499.png", "icon": "https://c.mql5.com/31/288/rsi-magic-kjuta-mql5-trial-logo-200x200-1982.png", "rating": 0, "price": 0, "published": 1544097582, "popularity": 0.15128063719561166, "category": "Indicator", "votes": 0 }, { "id": 33656, "title": "Rsi Magic kjuta mql5", "url": "https://www.mql5.com/it/market/product/33656", "small_icon": "https://c.mql5.com/31/287/rsi-magic-kjuta5-logo-60x60-3486.png", "middle_icon": "https://c.mql5.com/31/441/rsi-magic-kjuta-mql5-logo-140x140-8005.png", "icon": "https://c.mql5.com/31/287/rsi-magic-kjuta5-logo-200x200-9074.png", "rating": 0, "price": 0, "published": 1543964007, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33653, "title": "Line of Loss Percent for Controlling Risk MT5", "description": "

\r\n

This positions risk visualization indicators, indicators allow you to clearly know price go back will be generated how much account Loss Percent.

This is very useful indicator for Controlling Risk when account is open positions, attach this indicator to the chart of the open positions, this indicator will draw three Lines, the three Line of Loss Percent default value is 10% 30% 50% user can define their own Loss Percent value. Loss Percent corresponding Back Point will show in the upper left corner.

\r\n

Line of Loss Percent can give you clearly know what price is account loss percent, can give you better control account positions, it allows you to know the risks of the open positions.

\r\n

For example to buy type positions , when you judgment that the market price will not be lower than a Certain Price, then the Line of Loss 10% Price is below this certain price, you can continue to open buy type positions. as long as the Market Price is higher than the Loss 10% Price, the account will be loss less than 10%.

\r\n

For example to sell type positions, when you judgment that the Market Price will not be higher than a Certain Price, then the Line of Loss 12% Price is above this certain price, you can continue to open sell type positions. as long as the Market Price is lower than the Loss 12% Price, the account will be loss less than 12%.

\r\n

", "url": "https://www.mql5.com/it/market/product/33653", "small_icon": "https://c.mql5.com/31/287/line-of-loss-percent-for-controlling-risk-mt5-logo-60x60-8327.png", "middle_icon": "https://c.mql5.com/31/445/line-of-loss-percent-for-controlling-risk-mt5-logo-140x140-4567.png", "icon": "https://c.mql5.com/31/287/line-of-loss-percent-for-controlling-risk-mt5-logo-200x200-6166.png", "rating": 0, "price": 89, "published": 1543944179, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33592, "title": "Magic Finger Singal", "description": "

Magic Finger can help you identify trends and trading opportunities clearly. The finger points to the open position signal, and the discoloration line is confirmed by the trend.

If you are a day trader, you can choose to trade during a period of active trading, referring to the discoloration line as the basis for the next order, finger signal as a filter.
If you are a trend trader, you can choose a period above H1, wait for the appearance of the finger signal in the key price area, and enter the market to trade, and then use the discoloration line as a confirmation of the trend.
Stop loss can be used as a basis for stop loss dots.
RS is an important long-short watershed.

Input parameters:

RISK	5
MONEY RISK	2.0
AlertOption	*********************************
Local Alert	true
TimesOfAlerts	2
E-Mail Alert	false
App PUSH Notification	false
Display_Option	*********************************
Barclor_Display	true
RS_Display	true
Line2_Display	false
*ADR Option	*********************************
Display ADR	true
ATR Period	18
Normal Color	DarkOrange
Reach Color	MediumBlue

", "url": "https://www.mql5.com/it/market/product/33592", "small_icon": "https://c.mql5.com/31/287/magic-finger-singal-logo-60x60-5242.png", "middle_icon": "https://c.mql5.com/31/439/magic-finger-singal-logo-140x140-7325.png", "icon": "https://c.mql5.com/31/287/magic-finger-singal-logo-200x200-4597.png", "rating": 5, "price": 168, "published": 1543781164, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 33561, "title": "Institucional Color Candle", "description": "Idea extracted from the books by Anna Coulling and Gavin Holmes using Volume and Spread Analysis (VSA) techniques coupled with Al Brooks' expertise with Price Action these candles are magical, identify the exact moment
of the performance of the big players are acting in the market represented by the colors:

1) Red Candles we have an Ultra High activity,
2) Candles Orange we have a Very High Activity
3) Candles Yellow we have one High Activity
4) White Candles represent normal activity in the market
5) Blue Candles, market activity is very low without interest in the continuation of the movement here I fear we usually have the end of the wave of a pullbacks

Download <SmoothAlgorithms.mqh> and include in the include folders of your metatrader", "url": "https://www.mql5.com/it/market/product/33561", "small_icon": "https://c.mql5.com/31/671/institucional-color-candle-logo-60x60-2607.png", "middle_icon": "https://c.mql5.com/31/671/institucional-color-candle-logo-140x140-9605.png", "icon": "https://c.mql5.com/31/671/institucional-color-candle-logo-200x200-8561.png", "rating": 4.75, "price": 0, "published": 1543624355, "popularity": 1.9332464939148006, "category": "Indicator", "votes": 8 }, { "id": 33478, "title": "Matreshka", "description": "

Matreshka self-testing and self-optimizing indicator:

1. Is an interpretation of the Elliott Wave Analysis Theory.

2. Based on the principle of the indicator type ZigZag, and the waves are based on the principle of interpretation of the theory of DeMark.

3. Filters waves in length and height.

4. Draws up to six levels of ZigZag at the same time, tracking waves of different orders.

5. Marks Pulsed and Recoil Waves.

6. Draws arrows to open positions

7. Draws three channels.

8. Notes support and resistance levels.

9. Draws three types of Fibonacci meshes.

10. Redraws only the cost on the newest bar, except for the Fibonacci Extension mesh.

11. Has the ability to simulate trade in test and operating modes, as well as has the ability to self-test and self-optimization.

12. Contains Money Management

\r\n

The indicator consists of lots of modules, and therefore on a stage of ongoing development and refinement. Full description is in the blog:

\r\n

https://www.mql5.com/en/blogs/post/723022

\r\n

https://www.mql5.com/en/blogs/post/723026

\r\n

https://www.mql5.com/en/blogs/post/723028

\r\n

https://www.mql5.com/en/blogs/post/723033

\r\n

https://www.mql5.com/en/blogs/post/723035

\r\n

https://www.mql5.com/en/blogs/post/723037

\r\n

https://www.mql5.com/en/blogs/post/723038

\r\n

", "url": "https://www.mql5.com/it/market/product/33478", "small_icon": "https://c.mql5.com/31/286/matreshka-logo-60x60-9976.png", "middle_icon": "https://c.mql5.com/31/441/matreshka-logo-140x140-3500.png", "icon": "https://c.mql5.com/31/286/matreshka-logo-200x200-5360.png", "rating": 5, "price": 245, "published": 1543525459, "popularity": 80.9024718506341, "category": "Indicator", "votes": 2 }, { "id": 33513, "title": "BeST Darvas Boxes MT5", "description": "

\r\n

BeST_Darvas Boxes is a Metatrader Indicator based on the trading method developed in the 50’s by the Hungarian \r\nNicolas Darvas. BeST_Darvas Boxes indicator

\r\n

\r\n\r\n\r\n

draws the Top and the Bottom of every Darvas Box that can be confirmed on the current Chart
draws Buy and Sell Arrows for every confirmed Upwards or Downwards Breakout of the above levels
draws always only after the bar closing and so is non-repainting or backpainting
it can be used as a standalone trading system/method

\r\n

\r\n\r\n\r\n

Inputs

\r\n\r\n\r\n

\r\n
\r\n

\r\n

Basic Settings

\r\n

\r\n\r\n\r\n

LB Period - LB # of bars for calculating the Darvas Boxes
Entries Mode – for selecting how to Enter the Market i.e. in a Single Entry or in a 2_Additional Entries
Exits Mode (only for Single_Entry_Mode) – for selecting how to Exit a position.Works only for the Single Entry Mode \r\n while for the 2 Additional Entries Mode is by default the Reverse Mode
Position_1,2 and 3 Lot Size for 2_Additional_Entries_Mode – for the correct calculation of the Average Entry Price \r\n if we use the 2_ Additional_Entries_Mode

\r\n

Exit Modes' Settings

\r\n

\r\n\r\n\r\n

TP and SL Levels – for selecting TP and SL pip values if Exiting with a SL/TP
MAvgs Parameters – for selecting the parameters of 2 Mov.Averages if Exiting with their crossings

\r\n

Displaying Settings - for selecting which chart objects and features to show/activate

\r\n

Graphical Settings – for selecting the color and size of drawn objects like Vertical Line locating the last Entry Signal and the \r\ncorresponding Entry Price Level Horizontal Line and TP/SL Levels

\r\n

\r\nNote: Color and size of all other’s drawn objects (like Exit MAs,Arrows,…) are controled in the tab Colors

\r\n

Arrows Settings - for controlling the Arrows use for Entry and Exit Signals

\r\n

Panel Settings - for controlling the use of the Trade Info Panel

\r\n

\r\nNote: All Panel Infos are Real Time Updated while the Panel is fully color adjustable and can be moved \r\nanywhere in the chart

\r\n

Alert Settings - for controlling the use of Entry and Exit alerts

\r\n

\r\n\r\n\r\n

For EA Developers

\r\n\r\n\r\n

\r\n
\r\n

\r\n

Top of a Box : \r\n Buffer = 1

\r\n

Bottom of a Box : \r\n Buffer = 2

\r\n

Buy Arrow :

\r\n

(Single_Entry_Mode/

\r\n

1st position for the 2_Additional_Entries_Mode) Buffer = 3

\r\n

Sell Arrow :

\r\n

(Single_Entry_Mode/

\r\n

1st position for the 2_Additional_Entries_Mode) Buffer = 4

\r\n

Add_Buy_2 Arrow: \r\n Buffer = 5

\r\n

Add_Sell_2 Arrow: \r\n Buffer = 6

\r\n

Add_Buy_3 Arrow: \r\n Buffer = 7

\r\n

Add_Sell_3 Arrow: \r\n Buffer = 8

\r\n

Custom_Exit_Signal: \r\n Buffer = 9

\r\n

Exit_fastMA: \r\n Buffer = 10

\r\n

Exit_slowMA: \r\n Buffer = 11

\r\n\r\n\r\n

\r\n
\r\n

", "url": "https://www.mql5.com/it/market/product/33513", "small_icon": "https://c.mql5.com/31/286/best-darvas-boxes-mt5-logo-60x60-7102.png", "middle_icon": "https://c.mql5.com/31/445/best-darvas-boxes-mt5-logo-140x140-7963.png", "icon": "https://c.mql5.com/31/286/best-darvas-boxes-mt5-logo-200x200-6322.png", "rating": 3, "price": 35, "published": 1543440355, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 33486, "title": "Smart Depth Of Market", "description": "

The indicator displays the orders book, as well as increases its depth, remembering the location of orders that have gone beyond the current \"window\" view.

Indicator capability

Display the levels of open positions.
Simulation of placing/cancelling/editing pending orders directly in the displayed orders book.

Indicator features

The orders book display works only on those trading symbols for which it is broadcast by the broker.

To reset the information about the rows that were recorded in the Smart mode, switch the indicator to the Fixation mode and double-click on the orders book title.

For currency pairs, as a rule, the deals tape is not broadcast, so the input variable ProfileCalculation must be switched to the Interpretation state. In addition, it is desirable to use the input variable RowsUnite, which groups the rows by a specified number of points (for example, ten).

Input variables

A description of the input variables is attached on the \"Comments\" tab in post 55 of 26.11.2021.

", "url": "https://www.mql5.com/it/market/product/33486", "small_icon": "https://c.mql5.com/31/286/smart-depth-of-market-logo-60x60-5142.png", "middle_icon": "https://c.mql5.com/31/447/smart-depth-of-market-logo-140x140-6477.png", "icon": "https://c.mql5.com/31/286/smart-depth-of-market-logo-200x200-6361.png", "rating": 4.3333335, "price": 0, "published": 1543358706, "popularity": 5.947012700201272, "category": "Indicator", "votes": 18 }, { "id": 33341, "title": "Advanced Trend Scalper MT5", "description": "

The Advanced Trend Scalper MT5 indicator is designed to help both novices and professional traders.

The indicator analyses the market and gives you buy and sell signals. It does not use any other indicators, it works only with the market actions. The signal appears right after the candle close and it does not repaint. The efficient algorithm provides a high degree of reliability of such signals.

Advanced Trend Scalper for the MetaTrader 4 terminal : https://www.mql5.com/en/market/product/33283

Advantages of the indicator

Generates minimum false signals.
Suitable for beginners and experienced traders.
Simple and easy indicator configuration.
Works on all timeframes.
Works on any financial instrument.
The indicator does not repaint.
Sending signals to email and mobile devices.

Recommended symbols

EURUSD, GBPUSD, EURGBP.

Recommendations on usage

Buy signal: the indicator arrow is directed upwards.

Sell signal: the indicator arrow is directed downwards.

Parameters

Period - the main parameter, responsible for the indicator calculation period.
Alert - enable/disable Alert. If true - enabled, false - disabled.
Email enable/disable sending e-mails. If true - enabled, false - disabled.
Push enable/disable sending messages to the mobile terminal. If true - enabled, false - disabled.

", "url": "https://www.mql5.com/it/market/product/33341", "small_icon": "https://c.mql5.com/31/284/advanced-trend-scalper-mt5-logo-60x60-3669.png", "middle_icon": "https://c.mql5.com/31/446/advanced-trend-scalper-mt5-logo-140x140-3543.png", "icon": "https://c.mql5.com/31/284/advanced-trend-scalper-mt5-logo-200x200-1540.png", "rating": 5, "price": 38, "published": 1543244149, "popularity": 9.338933675043865, "category": "Indicator", "votes": 1 }, { "id": 33441, "title": "Weis Wave with Alert MT5", "description": "

Rental/Lifetime Package Options and Privileges

Rent Monthly Six Months Yearly/Lifetime

Weis Wave with Speed with Alert+Speed Index

x

x

x

Manual

x

x

x

Quick Set up Video

x

x

x

Blog

x

x

x

Lifetime Updates

x

x

x

Setup and Training Material

x

x

Discord Access Channel \"The SI traders\" x

Rectangle Break Alert Tool

x

Rent	Monthly	Six Months	Yearly/Lifetime
Weis Wave with Speed with Alert+Speed Index	x	x	x
Manual	x	x	x
Quick Set up Video	x	x	x
Blog	x	x	x
Lifetime Updates	x	x	x
Setup and Training Material		x	x
Discord Access Channel \"The SI traders\"			x
Rectangle Break Alert Tool			x

How to trade with it: http://www.tradethevolumewaves.com

** If you purchase please contact me to setup your : Training Room and complete manual access.

Weis Wave with Alert MT5

This is a Weis Wave indicator which is based on Richard D. Wyckoff theory. It works in all time periods, range bar and tick bar charts and it can be applied to any market.

This indicator is an evolution of Weis Wave because it offers 3 different swing methodologies feature (auto, manual and ATR, six different wave types,the powerful Speed Index and a display panel analyzing x waves back.. Each price wave is moving in a specific direction up or down until it reverses. In order for the indicator wave to reverse in the opposite direction, the price should exceed the number of points (pip*10) set in the parameters. Therefore, the last wave repaints but the theory behind this trading method is forecasting where the market will go by reading the previous waves.

Trading Strategies: www.tradethevolumewaves.com Setup Parameters

Indicator Number: Multiple Indicators can be added on the same chart. Valid values \"0 to 9\" and \"a-z\"
Maste Child indicator relationship for parameter sync
Swing Metdod
Show Orders: display or not your orders
Load all Bars: true/false, if false Number of bars back will be loaded
Number of bars back: numbers of bars that the indicator will load
Wave Direction Change difference in Points: Number of points required for the current wave to reverse and form a new wave
Volumetype= true=Tick Volume, false=Real Volume
Weighted Volume: true/false - Weights volume of different sessions taking into consideration that when London and US are operating at same time have the highest volume of all sessions occurs and adjusts the rest of the sessions. With this parameter it very easy visualize which volumes are significant even on Asian hours or non-significant on London-US hrs.
Net Volume: 0-Disabled, 1-Price Close, 2 Price Median
Wave Type: 0-Regular Volume, 1-Pips, 2-Progressive Volume Rate, 3-Time,4 Emphasized Volume Waves, 5 Inverse Progressive Pip Rate

Speed Index Display and Alert Parameters

SI Display: Show or not speed index on the chart 0-No Display, 1 Speed Index only, 2 Volume and Speed Index, 3 Speed Index and Average Speed Index, 4 Speed Index and Wave speed (Fast or SLow)
Show Plutus Patterns or Not
Alert on Plutus Patterns: Popup, Sound, Email, Push Notification
Display Panel of x wave back analyis
SpeedAlert: There are two ways that you can be notified for Extreme Speed Index numbers the Automatic and the Manual, please refer to the manual for explanations.

Alerts :Popup, Sound, Email, Push

Format Wave and Label

ShowLabels: Display or not the wave type the pips and the number of bars of each wave
What to Display:1-Volume,2-Pips, 3-Bars, 4-All, 5-Volume and Pips
ShowWaveLine: Draw the wave line or not on the price chart
Format: LabelShift, Font size, Color Up, Color Dn, wave color, wave width

Format Numbers for better display parameters

Auto Divisor to adjust numbers to your preference.
VolDivBy: Volume divider in order to avoid big numbers on the display
PipDivBy: Pip distance divider in order to avoid big numbers on the display
SI Multiplier: Speed Index Multiplier for better display
Reverse Style: inverts wave style

", "url": "https://www.mql5.com/it/market/product/33441", "small_icon": "https://c.mql5.com/31/861/weis-wave-with-alert-mt5-logo-60x60-8773.png", "middle_icon": "https://c.mql5.com/31/861/weis-wave-with-alert-mt5-logo-140x140-6499.png", "icon": "https://c.mql5.com/31/861/weis-wave-with-alert-mt5-logo-200x200-3648.png", "rating": 4.9411764, "price": 359, "published": 1543234789, "popularity": 38.64682684396477, "category": "Indicator", "votes": 17 }, { "id": 33448, "title": "ThreePointsChannelFree", "description": "

This is a free version of the indicator, the period between the vertical lines is always 30 bars. In the paid version the period can be set by user, so a configuration with many ThreePointsChannel indicators with different periods is possible.

\r\n

The principle of construction - on top of any number of bars set by the user, a channel is constructed with maximum and minimum lines so that the bars touch the maximum and minimum of the channel at exactly three points. The name of the indicator follows from this principle. Both vertical lines can be moved along the graph by the user, thus specifying the period on which the channel is built. After a specified period, channel rays are drawn that define a channel in which the price can move.

In the picture, the ThreePointsChannel channel is built on top of the bars between two vertical dashed lines. The three points along which the channel is built are marked with red circles. In the period between the two lines, the channel may redraw. The indicator has a parameter that prohibits redrawing. The right vertical dotted line shows a bar, after which the channel does not redraw. On the picture the green circle marks the moment when the price was in the overbought zone, a moment suitable for opening positions down. Blue circles mark the oversold zone, a moment suitable for closing positions down. The parallel lines inside the channel are the channel levels. By default, the Indicator takes the distance between the two main lines of the channel for 100% and draws lines of 23.6% (dotted line), 50% and 76.4% (dotted line) inside the channel. The percentage that the indicator uses to draw the channel is determined by the indicator parameter.

Indicator parameters:

Redraw - allows redrawing of the channel in the interval between two vertical lines, set by the user.

Coeff - determines the distance of the overbought and oversold channel as a percentage of the channel boundaries, is drawn with a dotted line.

Color - the parameter sets the color of all lines.

InputBar - sets the bar of the right vertical line on which the indicator will be initialized

Length - the distance between the left and right vertical line in bars.

The InputBar and Length parameters are responsible for the period in which the channel is initialized. After initialization, the user can move both vertical lines to adjust the period on which the channel is built.

In test mode, moving vertical lines is not possible due to the built-in limitations of the MetaTrader platform.

", "url": "https://www.mql5.com/it/market/product/33448", "small_icon": "https://c.mql5.com/31/285/threepointschannelfree-logo-60x60-3099.png", "middle_icon": "https://c.mql5.com/31/446/threepointschannelfree-logo-140x140-4717.png", "icon": "https://c.mql5.com/31/285/threepointschannelfree-logo-200x200-8996.png", "rating": 5, "price": 0, "published": 1543188249, "popularity": 0.542827361047433, "category": "Indicator", "votes": 1 }, { "id": 33447, "title": "FourierExtrapolationMAFree", "description": "

This is a free version and is forecasting only 5 bars

\r\n

The FourierExtrapolationMAFree indicator transforms and extrapolates the Moving Average function by the Fast Fourier Transformation method.

1. The transformation period is set by two vertical lines, by default the first blue line and the second pink.

2. By default, the Moving Average (MA) line is drawn in red.

3. By Fourier Transform, the indicator builds a model of N harmonics, which is as close as possible to the MA values. The model is drawn by default in blue over the MA for the period between the two vertical lines set by the user.

4. For the period after the second vertical line, the indicator draws a line Fourier Extrapolation model - predicts the probable movement of the Moving Average line. The line predicts the default movement of pink.

5. The trend green line, which begins with the left vertical blue line, is the axis along which the harmonics are calculated, transformed and extrapolated. The initial and extreme prices of the Axis are equal to the initial and extreme values of green MA. Green MA is drawn only between the blue and pink vertical line. The goal is to find the slope of the market.

https://charts.mql5.com/19/631/gbpusd-h4-robomarkets-ltd.png

Indicator parameters:

MovingAveragePeriod - Period of Red Moving Average

AxisMovingAveragePeriod - Period of Green Moving Average, Responsible for the Slope of the Axis

InputBar - the bar on which the vertical pink line is drawn, after which the pink predicted line is drawn

Harmonics Amount - the number of harmonics with which the Fourier Transformation model is built.

Length - the distance between two vertical lines, the period for which the Fourier Transform model is built.

AllowComment - if true, the indicator writes the actual parameters of the indicator in the upper left corner of the chart.

Hotkeys:

The user can change the parameters of the indicator after initialization through the keyboard keys. This allows you to configure the indicator without re-initialization. When you press different keys, different parameters change in real time.

Z - when pressed, the left (blue) vertical line moves to the left by 1 bar;

X - when pressed, the left (blue) vertical line moves to the right by 1 bar;

C - when pressed, the right (pink) vertical line moves to the left by 1 bar;

V - when pressed, the right (pink) vertical line moves to the right by 1 bar;

B - when pressed, the left (blue) and right (pink) vertical lines move to the left by 1 bar;

N - when pressed, the left (blue) and right (pink) vertical lines move to the right by 1 bar;

M - when pressed, reduces the number of Harmonics used for the Fourier Transform;

, - when clicked, increases the number of Harmonics used for the Fourier Transform;

. - when pressed, decreases the MA period by 1;

/ - when pressed, increases the MA period by 1;

K - when pressed, moves the beginning of the Trend line. Axis up by 10 pips.

L - when pressed, moves the beginning of the Trend line. Axis down by 10 pips.

; - when pressed, moves the end of the Trend line Axis up by 10 pips.

- when pressed, moves the end of the Trend line Axis down by 10 pips.

", "url": "https://www.mql5.com/it/market/product/33447", "small_icon": "https://c.mql5.com/31/285/fourierextrapolationmafree-logo-60x60-9129.png", "middle_icon": "https://c.mql5.com/31/439/fourierextrapolationmafree-logo-140x140-5507.png", "icon": "https://c.mql5.com/31/285/fourierextrapolationmafree-logo-200x200-4699.png", "rating": 5, "price": 0, "published": 1543187060, "popularity": 0.7722166277400111, "category": "Indicator", "votes": 3 }, { "id": 33339, "title": "Weiss Wave with Zigzag and several data", "description": "Weiss Wave with lots of functionality and lightweight. The same can be used both in markets that have access to volume (REAL=Contracts, Tick=Business) or points!

You will be able to:

    - Analyze the volume of the market by swings made!

    - Define the source of the data presented in the graphic, its size and color! Or simply hide this information!

    - Define whether or not to show the swings in the graph and how many swings! In addition to setting the trend line color, thickness and trend line style!

The data shown in the chart when enabled are:

     - Volume or points (according to configuration);

     - Growth percentage in relation to the previous wave of the same type;

     - Wave pontuation achieved from one close to the next! ", "url": "https://www.mql5.com/it/market/product/33339", "small_icon": "https://c.mql5.com/31/284/weiss-wave-with-zigzag-and-several-data-logo-60x60-1296.png", "middle_icon": "https://c.mql5.com/31/446/weiss-wave-with-zigzag-and-several-data-logo-140x140-3554.png", "icon": "https://c.mql5.com/31/284/weiss-wave-with-zigzag-and-several-data-logo-200x200-5946.png", "rating": 0, "price": 70, "published": 1542744888, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33298, "title": "CCI coded Volume Indicator", "description": "The Indicator is based on Commodity Channel Index (CCI) coded on Volume. The concept is to try and analyze the movement of Volume and Price in a certain direction

Concept:
If the Price of the indicator moves below the threshold price, it turns RED indicating the direction downwards is getting strong.
If the Price of the indicator moves above the threshold price, it turns GREEN indicating the direction upwards is getting strong.
The moving average acts as a great filter to decide entry/exit points

", "url": "https://www.mql5.com/it/market/product/33298", "small_icon": "https://c.mql5.com/31/284/cci-coded-volume-indicator-logo-60x60-8614.png", "middle_icon": "https://c.mql5.com/31/440/cci-coded-volume-indicator-logo-140x140-3167.png", "icon": "https://c.mql5.com/31/284/cci-coded-volume-indicator-logo-200x200-3810.png", "rating": 5, "price": 0, "published": 1542580993, "popularity": 2.3415602033626475, "category": "Indicator", "votes": 2 }, { "id": 33292, "title": "Japan CandleStick Patterns", "description": "

Japanese candlestick analysis has been in existence for hundreds of years and is a valid form of technical analysis. Candlestick charting \r\nhas its roots in the militaristic culture that was prevalent in Japan in the 1700s. One sees many terms throughout the Japanese literature on \r\nthis topic that reference military analogies, such as the Three White Soldiers pattern

\r\n

Unlike more conventional charting methods, candlestick charting gives a deeper look into the mind-set of investors, helping to establish a \r\nclearer picture of supply/demand dynamics.

\r\n

Japanese candlestick charts do not require anything new or different as far as price data are concerned. Open, high, low, and close are all that are \r\nneeded to construct a candlestick chart. There are two main elements in the construction of a candlestick, the real body and the shadows.

\r\n

https://www.icmarkets.com/?camp=36056

", "url": "https://www.mql5.com/it/market/product/33292", "small_icon": "https://c.mql5.com/31/284/japan-candlestick-patterns-logo-60x60-5476.png", "middle_icon": "https://c.mql5.com/31/440/japan-candlestick-patterns-logo-140x140-6339.png", "icon": "https://c.mql5.com/31/284/japan-candlestick-patterns-logo-200x200-1802.png", "rating": 3.6666667, "price": 0, "published": 1542547597, "popularity": 0.9666232469574002, "category": "Indicator", "votes": 3 }, { "id": 33226, "title": "Day Channel", "description": "

Day Channel

The indicator draws a channel built on the extremum levels of bars from the older period set in the settings, and also displays the level of closing prices. For the indicator to work correctly, the current period for which the indicator will be set must be less than the specified period in the indicator settings.

Description of indicator settings:

TimeFrame - selection of a period for plotting indicator levels. By default, the daily chart period is set.
LevelClose - enable or disable the display of the close price level of the older period.
Bar_Limit - restriction of the indicator display on a specified number of bars; if = 0, it is displayed on all available bars.

", "url": "https://www.mql5.com/it/market/product/33226", "small_icon": "https://c.mql5.com/31/283/day-channel-logo-60x60-2883.png", "middle_icon": "https://c.mql5.com/31/441/day-channel-logo-140x140-1924.png", "icon": "https://c.mql5.com/31/283/day-channel-logo-200x200-3494.png", "rating": 0, "price": 64, "published": 1542264415, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33222, "title": "Custom Pivots MT5", "description": "

Pivots Points are significant levels traders can use to determine \r\ndirectional movement, support and resistance. Pivot Points use the prior\r\n period's high, low and close to formulate future support and \r\nresistance. In this regard, Pivot Points are predictive and leading \r\nindicators.

\r\n

Pivot Points were originally used by floor traders to set key levels.\r\n Floor traders are the original day traders. They deal in a very fast \r\nmoving environment with a short-term focus. At the beginning of the \r\ntrading day, floor traders would look at the previous day's high, low \r\nand close to calculate a Pivot Point for the current trading day. With \r\nthis Pivot Point as the base, further calculations were used to set \r\nsupport 1, support 2, resistance 1 and resistance 2. These levels would \r\nthen be used to assist their trading throughout the day.

\r\n

Pivot Points are one of the simplest and oldest tools for technical \r\nanalysis. Today traders from all over the world successfully incorporate\r\n Pivot Points in their strategies. However, this popular professional \r\ntool is not included by default in MetaTrader 5. That's why I decided to\r\n create good and affordable Pivot Points indicator for MetaTrader 5. \r\nThis indicator offers wide range of options for personal customization.

\r\n

\r\nMain Features
\r\n

\r\n

Multiple types of calculation for the levels.
Automatic vertical scaling of the chart with adjustable scaling ratio.
Adjustable time frames.
Extensive options for visual customization.
Alerts and Push notifications.
Quick button to temporarily hide or show the indicator.
The indicator works in the strategy tester.

In short, this is one of the best Pivot Points indicators available for \r\nMetaTrader 5. Simple professional tool which deserves to be in your \r\ntoolbox.

\r\n

\r\nIndicator Settings
\r\n

\r\n

Main Settings

Time Frame.
Periods - number of time frame periods.
Type - type of calculation. (Standard, Fibonacci, Volatility Adjusted, Fixed)
Chart Auto Set - automatic chart configuration.
Chart Scale Multiplier - vertical chart scaling.
Buttons Settings and colors.

Alerts Settings

Enable/disable alerts for different levels.

Pivot Levels

Show Pivot Levels - true/false.
Colors and Width settings.

Period Separators

Show Period Separators - true/false.
Color.

Color Shades

Show Color Shades - true/false.
Colors.

Text Info

Show Text Info - true/false.
Font.
Font Size.
Font Color.

If you have some questions or if you need help, contact me via Private Message.

", "url": "https://www.mql5.com/it/market/product/33222", "small_icon": "https://c.mql5.com/31/283/custom-pivots-mt5-logo-60x60-2701.png", "middle_icon": "https://c.mql5.com/31/442/custom-pivots-mt5-logo-140x140-9474.png", "icon": "https://c.mql5.com/31/283/custom-pivots-mt5-logo-200x200-1006.png", "rating": 5, "price": 30, "published": 1542215018, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 33219, "title": "RVI Sniper Alert", "description": "

The Alert Arrows RVI indicator is an advanced version of the Relative Vigor Index (RVI), augmented with alert arrow functionality. It can identify potential support and resistance levels, providing traders with valuable insights into market dynamics.

Key Features:

Alert Arrows: Integrated alert arrows offer visual cues for potential trading opportunities.
Additional Filters: Two extra filters are implemented to improve the indicator's readings, increasing the accuracy and reliability of signals.
Enhanced Smoothing: The indicator is further smoothed for consistent performance and clear signals.
Short-term Timeframes: Designed for short-term timeframes from M1 to M30, ideal for traders seeking intraday opportunities.
Compatibility with Hourly Charts: It also performs well on hourly charts, providing flexibility for traders with longer-term strategies.

Usage Recommendations:

It is recommended to combine this indicator with an additional filter, such as MACD, to further enhance its effectiveness.

", "url": "https://www.mql5.com/it/market/product/33219", "small_icon": "https://c.mql5.com/31/283/rvi-sniper-alert-logo-60x60-2943.png", "middle_icon": "https://c.mql5.com/31/441/rvi-sniper-alert-logo-140x140-9570.png", "icon": "https://c.mql5.com/31/283/rvi-sniper-alert-logo-200x200-4337.png", "rating": 4.5, "price": 0, "published": 1542211262, "popularity": 2.4084393410624925, "category": "Indicator", "votes": 4 }, { "id": 33196, "title": "Sniper MACD", "description": "

The \"Sniper MACD\" indicator is an improved version of the classic MACD, designed to enhance trading efficiency. It features additional filtering and multiple smoothing methods, allowing for more accurate signals.

Features:

Additional Filtering: Improves signal quality, reducing the likelihood of false triggers and increasing forecast accuracy.
Multiple Smoothing: Reduces market noise, providing more reliable signals.
Volume Integration: The built-in volume indicator helps assess market conditions more accurately, enhancing overall market perception.

Usage Recommendations:

It is recommended to use the \"Sniper MACD\" indicator on timeframes from M1 to M30, as it is specifically tuned for short-term trading. It is most effective on highly volatile pairs, such as EUR/USD and EUR/JPY, where there is sufficient activity for profitable trades.

", "url": "https://www.mql5.com/it/market/product/33196", "small_icon": "https://c.mql5.com/31/283/sniper-macd-logo-60x60-5360.png", "middle_icon": "https://c.mql5.com/31/445/sniper-macd-logo-140x140-8123.png", "icon": "https://c.mql5.com/31/283/sniper-macd-logo-200x200-5034.png", "rating": 4.352941, "price": 0, "published": 1542127928, "popularity": 9.458163207450138, "category": "Indicator", "votes": 17 }, { "id": 33197, "title": "VWAP Bands", "description": "This indicator uses VWAP and projects this VWAP into up to 3 levels, shifted by a percentage of the chart's symbol.

How to configure:

Choose the symbol and desired graphic time
Set the start time of the symbol (in bovespa, WIN and WDO start at 9 o'clock). This time is used as the cutoff reference for VWAP.
Check which VWAP period fits the chart better: Ideally, a period when VWAP is not too distant from the chart
Set percentage levels: Ideally, you should set levels based on history, so that level 1 touches most short peaks, level 2 touches most long peaks, and level 3 touches most peaks (outliers).

The other parameters serve to allow a finer adjustment.

Parameters:

VWAP Type:

Daily (0)
Weekly (1)
Monthly (2)
Period (3): This is a mobile VWAP based on the period indicated by the VWAP Period field.
Each hour (4): VWAP restarts each hour
Each 2 hours (5): VWAP restarts each 2 hours
Each 3 hours (6): VWAP restarts each 3 hours
Each 4 hours (7): VWAP restarts each 4 hours
Each 6 hours (8): VWAP restarts each 6 hours

[Type:Period] VWAP Period: Used only when the VWAP Type is Period.
Initial time: VWAP reference time. Set the symbol's opening time on the day. If it is a symbol that works 24hrs, place a preferred time of yours (usually the opening hours of NY or some other significant stock market).
Applied to:

Opening (0)
Closing (1)
High (2)
Low (3)
Opening and closing (4)
HILO (5)
Closing, high and low (6)
Opening, closing, high and low (7)

Band 1 percentage: Sets the bandwidth level 1. The value is in percentage of the previous day's close of the current symbol. For example: If the symbol closed at 5000 points yesterday, putting the 1% value in band 1 will draw band 1 offset 50 points of the VWAP, up and down.
Band 2 percentage: Sets the level of band 2. The value is in percentage of the closing of the previous day of the current symbol. For example: If the symbol closed at 5000 points yesterday, putting the 1% value in band 2 will draw band 2 offset 50 points of the VWAP, up and down.
Band 3 percentage: Sets the level of the band 3. The value is in percentage of the closing of the previous day of the current symbol. For example: If the symbol closed at 5000 points yesterday, putting the 1% value in band 3 will draw the band 3 offset 50 points of the VWAP, up and down.
Band 4 percentage: Sets the level of the band 4. The value is in percentage of the closing of the previous day of the current symbol. For example: If the symbol closed at 5000 points yesterday, putting the 1% value in band 4 will draw the band 4 offset 50 points of the VWAP, up and down.
Band 5 percentage: Sets the level of the band 5. The value is in percentage of the closing of the previous day of the current symbol. For example: If the symbol closed at 5000 points yesterday, putting the 1% value in band 5 will draw the band 5 offset 50 points of the VWAP, up and down.

Programmers: This indicator was optimized for use on robots (Expert Advisor), it does not redraw! EA should wait for the candle to close. Do not act upon incomplete candles (otherwise the robot may act on a false alarm).

", "url": "https://www.mql5.com/it/market/product/33197", "small_icon": "https://c.mql5.com/31/283/vwap-bands-logo-60x60-3988.png", "middle_icon": "https://c.mql5.com/31/446/vwap-bands-logo-140x140-9420.png", "icon": "https://c.mql5.com/31/283/vwap-bands-logo-200x200-4431.png", "rating": 0, "price": 30, "published": 1542123036, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 33172, "title": "FourierExtrapolationMA", "description": "

The FourierExtrapolationMA indicator transforms and extrapolates the Moving Average function by the Fast Fourier Transformation method.

Indicadores técnicos para MetaTrader 5

Indicator type

Preços

High Trend Lite MT5

Inside Days Candlestick Bulkowski

PipFinite Breakout EDGE MT5

High Trend MT5

KT Psar Arrows MT5

KT Auto Fibo MT5

KT Pin Bar MT5

Outside Days Candlestick Bulkowski

My Big Bars MT5

Pivot MT5

Crossover System

Engulfing Candlestick Bulkowski

KT COG Advanced MT5

Simple Weis Wave

KT Momentum Arrows MT5

Blahtech Moving Average MT5

Blahtech Fisher Transform MT5

Hi Low Last Day

TeaCii Auto Fibonacci MTF

SC MTF Obv for MT5 with alert

Market Sentiment for MT5

HV Models

Rsi Magic kjuta mql5 trial

Rsi Magic kjuta mql5

Line of Loss Percent for Controlling Risk MT5

Magic Finger Singal

Institucional Color Candle

Matreshka

BeST Darvas Boxes MT5

Smart Depth Of Market

Advanced Trend Scalper MT5

Weis Wave with Alert MT5

ThreePointsChannelFree

FourierExtrapolationMAFree

Weiss Wave with Zigzag and several data

CCI coded Volume Indicator

Japan CandleStick Patterns

Day Channel

Custom Pivots MT5

RVI Sniper Alert

Sniper MACD

VWAP Bands

FourierExtrapolationMA

ThreePointsChannel

Deposit Supercharger

Three Line Strike Scanner with trend filter

Double top bottom scanner with RSI filter MT5

TeaCii Trend for Range and Break Out

DoNotHideExternalBarMT5

Volume Spread Pattern Detector MT5

Currency RSI Scalper MT5

Fibonacci Expansion and Retracement For 5

Flat Global MT5

Reliable Scalping Indicator MT5

Volume Spread Pattern Indicator MT5

Time Box Indicator MT5

SC MTF Ma for MT5 with alert

Fractals Dashboard MT5

As Capital Line mt5

TSO Thermostat Strategy

Volumen Advisor

Absolute currency strength for MT5

ZigZag Dashboard for MT5

Line Profit

PD Universal Oscillator

Trend Moving Average

Price Channel and Bollinger Bands

PD Price Channel

PD Bollinger Bands

Awesome Oscillator

Angry Alligator

Market Impulse