{ "from": 9936, "count": 72, "list": [ { "id": 35900, "title": "EU Savings Box EA", "description": "

EU_Savings_Box (MT5 Expert Advisor)

This is 100% Algo Forex Trading Robot and is programmed for Long Term Investment with Low Risk. It uses no martingale, no grid, no scalping.

The strategy combines 3 reliable and properly filtered indicators and price action to determine safe market entry and exit levels. This strategy has over 70% winning rate within 18 year plus. It is recommended for those looking for EA that can be trusted for many years.

\r\n

Moreover, you can adapt this EA to your preferred trading style, for instance scalping trading style, by optimizing the TP, SL, etc to your taste.

\r\n

EU_Savings_Box has Trading Time Filter which makes it possible to limit trading to specified period of the day. This option can be optimized with your broker's time and data for better performance.

MM can be increased or reduced appropriately. Higher value mean higher stake, higher profit. Lower MM is recommended for Bigger Investment.

This EA with its default setting is optimized and recommended for H1 Timeframe of EURUSD Pair and has been backtested with good performance and low drawdown for 8 years on real tick data.

PARAMETERS:

1. UseFixedLot: By default, this is set to false, meaning you are using growing lots based on available capital and MM setting. If you prefer to use fixed lot size, set this to true.

2. FixedLotsize: Ignore this if you're not using fixed lot size. If using fixed lot, ensure the value you set here is commensurate with your available capital.

3. MM_Percent: Money Management - Default value MM 15 or below is recommended. Higher value means higher stake.

4. MM_Denominator: Default value is 1,000. Your Account Balance divided by MM_denominator multiply by MM_Percent determines your lot size per trade.

5. MinLot: This is used to set your preferred minimum lot size.

6. MaxLot: This is used to set your preferred maximum lot size.

7. Stop Loss: Pip value is used. EA will recognize your broker's digits automatically.

8. Take Profit: Pip value is used. EA will recognize your broker's digits automatically.

9. MaxSpread: Maximum Allowed Spread. Used for spread protection.

10. Indicator1 - Parameter1

11. Indicator1 - Parameter2

12. Indicator2 - Parameter1

13. Indicator3 - Parameter1

14. Indicator3 - Parameter2

15. AllowTradingFromHour: 0 to 23 can be used.

16. AllowTradingFromMinute: 0 to 59 can be used.

17. AllowTradingUntilHour: 0 to 23 can be used.

18. AllowTradingUntilMinute: 0 to 59 can be used.

19. Magic Number: Can be combination of digits from 0 to 9.

EA will recognize currency pair prefix, suffix, as well as broker's digits. Hence it can work well with any MT5 broker and can manage both small and large capital.

It is recommended to host your account and the EA on MQL5.com VPS, for better result.

See screenshots for EA testing results. To confirm the backtest result, ensure you have enough data history downloaded.

Note: MT4 version of this EA is available in the market place here: https://www.mql5.com/en/market/product/35374

", "url": "https://www.mql5.com/en/market/product/35900", "small_icon": "https://c.mql5.com/31/308/eu-savings-box-ea-logo-60x60-5213.png", "middle_icon": "https://c.mql5.com/31/440/eu-savings-box-ea-logo-140x140-8737.png", "icon": "https://c.mql5.com/31/308/eu-savings-box-ea-logo-200x200-2828.png", "rating": 0, "price": 100, "published": 1550444404, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35923, "title": "GS target5", "description": "

\r\n
\r\n

\r\n\r\n\r\n

The revolutionary automatic adviser of the new generation with three parameters:
\r\n\r\n\r\n
\r\n
Target profit per month (from 10% to 100%)
\r\n
Degree of risk (SuperLow, Low, Medium, High)
\r\n
Stop Loss Limit, USD
\r\n
\r\n\r\n\r\n
\r\n Set up to work on EURUSD timeframe M15. \r\n

\r\n\r\n\r\n

\r\n

Works on HEDGING accounts with a leverage of 1:500 and a Deposit from 500USD.

\r\n

\r\n\r\n\r\n

Enough for work:

\r\n\r\n\r\n

\r\n

\r\n
Decide on the size of the deposit that you can trust him

\r\n
Set the value of the desired profit per month (from 10 to 100 percent)
\r\n
Select the degree of risk (Low, Medium, High)
\r\n

\r\n

The Expert Advisor on its own selects the best trading strategy and adjusts the parameters for the work in order to satisfy the set goal.

\r\n\r\n\r\n

\r\n

The Stop Loss Limit parameter sets the loss value at which all orders are closed and trading stops until the START_trade button is \r\n pressed.

\r\n

Built-in News filter: Advisor does not open new deals on the days of publication of decisions on rates of the Fed and the ECB.

\r\n

Version for MT4 GS target: https://www.mql5.com/en/market/product/33127

\r\n\r\n\r\n

\r\n

The signal on the real account MT5 GS grid5 corresponds to the mode \"75%\", \"Medium\" : https://www.mql5.com/en/signals/636537

\r\n

\r\n\r\n\r\n

\r\n
There are provisions for selective closing of orders manually.
\r\n
If the Deposit decreases as a result of closing a losing order or withdrawing part of the Deposit, the EA will automatically \r\n recalculate the initial lot.
\r\n
On the chart display button CloseSELL and CloseBUY and information about profit orders SELL and BUY.
\r\n
In the 50% mode, the ONLY SELL, ONLY BUY, SELL+BUY buttons are displayed on the chart, setting the direction of trade.

\r\n

The algorithm of the advisor is similar to the GS \r\ngrid5 .

\r\n

The Expert Advisor uses Heiken Ashi, RSI, Stochastic indicators to open orders.

\r\n

The SELL and BUY orders are opened (depending on the parameters set), guided by signals and the market situation.

\r\n

Additional information in my blog: https://www.mql5.com/en/blogs/post/724372

\r\n\r\n\r\n

Parameters

\r\n\r\n\r\n

Target profit per month,% = 50% - options (10, 25, 50, 75, 100)
Risk level = Medium - options (SuperLow, Low, Medium, High)
Stop Loss Limit = 0 - loss limit, USD (0 - not used)
Magic number = 23577705 - must be unique for each chart

\r\n

Description of parameters:

\r\n\r\n\r\n

Target profit = 10%, 25%, 50%, 75%, 100%, each of them has its own advisor settings

\r\n\r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n

Value	Final day	Working time, GMT	Use orders
10%	Friday	from \"23:00\" to \"06:00\"	ONLYSELL
25%	Friday	from \"20:00\" to \"08:00\"	SELL + BUY
50%	Friday	from \"00:00\" to \"23:59\"	ONLYSELL
75%	Friday	from \"00:00\" to \"23:59\"	SELL + BUY
100%	Saturday	from \"00:00\" to \"23:59\"	SELL + BUY

\r\n\r\n\r\n

Risk Level = SuperLow, Low, Medium, High

\r\n

Determines the calculation of the starting lot, depending on the amount of the deposit.

Value	Deposit = 2000USD	Deposit = 1000USD	Deposit = 500USD
Superlow	0.01	0.01	0.01
Low	0.02	0.01	0.01
Medium	0.03	0.02	0.01
High	0.06	0.03	0.01

\r\n\r\n\r\n

Stop Loss Limit, USD = 0 (default)

\r\n

If Stop Loss Limit is not 0, sets the loss value at which all orders are closed and trading stops until the START_trade button is pressed.

\r\n

For the adviser to work and to overcome possible drawdowns, as much as possible deposit is required. If you set the Stop Loss Limit value too \r\nsmall, then almost certainly the market will find an opportunity to bite off part of your deposit.

\r\n

You can recommend setting the value of Stop Loss Limit equal to the amount of the initial deposit.

\r\n\r\n\r\n

Screenshots results

\r\n\r\n\r\n

For version 1.2 EURUSD M15 April to June 2019 for an initial deposit of \r\n 1000 USD,Target profit per month,% = 100%, Risk level = High
For version 1.0 EURUSD M15 for an initial deposit of 1000 USD,Target \r\n profit per month,% = 200%, \r\n\r\n Risk level = High

\r\n

", "url": "https://www.mql5.com/en/market/product/35923", "small_icon": "https://c.mql5.com/31/308/gs-target5-logo-60x60-5467.png", "middle_icon": "https://c.mql5.com/31/441/gs-target5-logo-140x140-1548.png", "icon": "https://c.mql5.com/31/308/gs-target5-logo-200x200-3088.png", "rating": 0, "price": 90, "published": 1550312101, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 35952, "title": "Golden Ratio Oscillator", "description": "

It is an indicator that works with oscillations based on golden proportions.

\r\n

Through this indicator it is possible to operate using the proportions of the number of gold to elaborate strategies with the golden ratio. In this way, it is possible to make market analyzes respecting the proportions of Fibonacci.

How to use:

\r\n

The closer the lines are to each other, the greater the possibility of retraction or inversion of the movement, the same is true for the distance of the lines.

Nearby lines, suggest possibility of purchase.

Distant lines, suggest possibility of sale.

Continuity of closer lines suggest a downward trend.

Continuity of distant lines, suggest upward trend.

Lines above 65 suggest sale.

Lines close to 0 suggest buying.

Watch the video to understand.

\r\n

Parameter:

[period] represents the period that will be used as the basis for generating the oscillations with the proportions of gold.

", "url": "https://www.mql5.com/en/market/product/35952", "small_icon": "https://c.mql5.com/31/309/golden-ratio-oscillator-logo-60x60-7247.png", "middle_icon": "https://c.mql5.com/31/441/golden-ratio-oscillator-logo-140x140-2024.png", "icon": "https://c.mql5.com/31/309/golden-ratio-oscillator-logo-200x200-9468.png", "rating": 0, "price": 35, "published": 1550562023, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 35983, "title": "Trend dashboard MT5", "description": "

I recommend you to read the product's blog (manual) from start to end so that it is clear from the beginning what the indicactor offers.

This multi time frame and multi symbol trend indicator sends an alert when a strong trend or trend reversal has been identified. It can do so by selecting to build up the dashboard using Moving average (single or double (both MA:s aligned and price above/below both)), RSI, Bollinger bands, ADX, Composite index (Constance M. Brown), Awesome (Bill Williams), MACD (signal line), Heiken Ashi smoothed, Hull moving average, Stochastics crossovers, Gann HiLo Activator and Traders Dynamic Index. It can be used with all time frames from M1 to MN. Maximum 9 time frames can be shown in the dashboard at the same time. The colors in the dashboard are green for bullish, red for bearish and blue for neutral (indicator values not in range).

Combined with your own rules and techniques, this indicator will allow you to create (or enhance) your own powerful system.

Features

The indicator can write the signals to global variables which can be used by an Expert Advisor for auto trading.
It is possible to select up to 9 time frames to be used.
Continuously performs a trend strength rank sorting within the dashboard.
By clicking inside a rectangle a new chart will be opened with the symbol and time frame in question.

It is enough to place the indicator on one chart and you will receive an alert from any symbol of your choice. All alert types are supported.

Input parameters

Please find the description and explanation of the input parameters here.

Important

Please note that this indicator is not supported in the strategy tester. It will also not draw lines and arrows or sell and buy advice on any chart.

The indicator must be put on a M5 chart. A clean (empty) chart without any other indicators or Expert Advisors on it which could interfere with the dashboard. The dashboard will be loaded in an indicator window which you can then expand to cover the whole chart.

", "url": "https://www.mql5.com/en/market/product/35983", "small_icon": "https://c.mql5.com/31/309/trend-dashboard-mt5-logo-60x60-1322.png", "middle_icon": "https://c.mql5.com/31/439/trend-dashboard-mt5-logo-140x140-8021.png", "icon": "https://c.mql5.com/31/309/trend-dashboard-mt5-logo-200x200-1490.png", "rating": 5, "price": 49, "published": 1550483479, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 35998, "title": "Binary Absorption", "url": "https://www.mql5.com/en/market/product/35998", "small_icon": "https://c.mql5.com/31/309/binary-absorption-logo-60x60-3804.png", "middle_icon": "https://c.mql5.com/31/446/binary-absorption-logo-140x140-1948.png", "icon": "https://c.mql5.com/31/309/binary-absorption-logo-200x200-1240.png", "rating": 5, "price": 0, "published": 1550497739, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 36059, "title": "Very useful information", "description": "Very useful information (VUI) - provides useful information on the following points:

Pip price - the price of point (pip) in the currency of the account with the volume specified by you
Tick size - tick size
Margin Buy - margin required to open a Buy order with the volume specified by you
Margin Sell - margin required to open a Sell order with the volume specified by you
Open Buy - the number of open positions, the number of open lots Buy
Open Sell - the number of open positions, the number of open lots Sell
Closed Buy - the number of closed positions, the number of closed lots Buy
Closed Sell - the number of closed positions, the number of closed lots Sell
Profit calc - profit calculator, calculates profit by the parameters you specified Open_price, Close_price, Lots

Just set the parameters you need and the results will appear in the upper left corner quickly, simply and accurately.", "url": "https://www.mql5.com/en/market/product/36059", "small_icon": "https://c.mql5.com/31/310/very-useful-information-logo-60x60-5537.png", "middle_icon": "https://c.mql5.com/31/440/very-useful-information-logo-140x140-3119.png", "icon": "https://c.mql5.com/31/310/very-useful-information-logo-200x200-1897.png", "rating": 0, "price": 30, "published": 1550686081, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 36063, "title": "Silver Line MT5", "description": "

Automated Expert Advisor developed for forex trading.

- Expert Advisor is suitable for all types of accounts and any type of spread.
- The number of decimal places in quotes is determined automatically.
- Timeframe of the chart does not matter. You can use any. Work timeframe is defined in the settings.
- The EA always uses Take Profit and thus it is less sensitive to the speed of the broker.
- The EA has two built-in types of trailing stop. Any of them can be used.
- The EA features a spread control, which prevents the EA from opening orders at a large spread value.
- There is a drawdown control, after reaching the specified value, the EA will forcibly close all trades.
- It is possible to disable the calculation and using of take profit, and thus use third-party systems for closing orders.
- Additional buttons for quick closing of positions allow for manual intervention in trading.

Account must support hedging mode.

The default settings are optimized for the EURUSD pair.

The recommended leverage is 1:500 (1:400). But you can use and more leverage.

The minimum deposit is 1000 USD on a standard account. But I recommend to use the deposit 2000 USD and more.

With small amounts of deposit, you need to use a cent accounts or micro accounts.

Settings

Risk - the value of the risk. Used to calculate the dynamic size of the order;
Fixed Lot Size - fixed lot size. If set to 0, the EA uses the dynamic lot size;
Spread control - enable/disable spread control;
Maximum spread - maximum allowable spread;
Drawdown control - drawdown control. The EA closes the trades when the specified value is reached;
Maximum drawdown - maximum allowable drawdown, in percents;
Time applies to - time parameter is applied only to the first order or to all orders [First order | All orders];
Open Time -time of start trading,by the terminal (broker) time;
Close Time - time of end trading, by the terminal (broker) time;

TP for Single order - expected profit for a single order, in points;
TP for 2 orders - expected profit with two open orders, in points;
TP for 3 orders - expected profit with three open orders, in points;
TP for 4 orders - expected profit with four open orders, in points;
TP for 5 orders - expected profit with five or more open orders, in points;
Min Candles - minimum time between orders, in minutes;
Min Distance - minimum distance between orders, in points;
Min Range - minimum allowable deviation of the indicator;
Period - period of the indicator;
Trailing Stop - profit in points to activate trailing stop (standard);
Trailing Step - step of trailing stop (standard), in points;

Work Timeframe - working timeframe;
Lot multiplier - multiplier for subsequent orders;
Trailing First - apply trailing stop to the first order;
Trailing All - apply trailing stop to all orders except the first order;
No of Previous Bar - number of the bar that will be used as the stop loss price;
HighLow Price Shift - shift of the stop loss price from the previous bar's price;
Trailing Stop Mode - applied variant of trailing stop (standard or previous bar);
TP Modification - allow the EA to set and modify take profit values;
Maximum Orders - maximum number of simultaneously open orders in the same direction;
Slippage - maximum allowed price slippage in points;
Buttons panel - show the panel with the \"Sell Close\" and \"Buy Close\" buttons;
Text Color - color of displayed data;
Background Color - color of the background for displayed data;
Order's Comment - comment of the Expert Advisor's orders;
Magic Number - unique number of the Expert Advisor's orders (any number);

For any questions please send me a private message. I will be glad to help you.

", "url": "https://www.mql5.com/en/market/product/36063", "small_icon": "https://c.mql5.com/31/309/silver-line-mt5-logo-60x60-3241.png", "middle_icon": "https://c.mql5.com/31/445/silver-line-mt5-logo-140x140-5338.png", "icon": "https://c.mql5.com/31/309/silver-line-mt5-logo-200x200-9147.png", "rating": 0, "price": 150, "published": 1550843665, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36092, "title": "FX Market Correlation", "description": "

FX Market Correlation indicator calculates the weakness/strength from all 28 currency pairs in the market. This is unique and powerful way of watching the market. It works on all timeframes. You can use it for scalping, or you can use it for long term trading. FX Market Correlation indicator is NOT repainting.

Features:

---------

-easy determine which currency is strengthening and which is weakening

-choose best currency pairs to trade and times to trade them

-find correlation between pairs

-NOT repainting

How to trade using FX Market Correlation chart:

-----------------------------------------------

1. find a currency that has long period of going one way (up or down)

2. when a change of trend direction occurs look if there is another currency that has opposite trend change at the same momment - this is the best trading opportunity

3. use your own trading method to confirm a trade

Please look at the examples in the pictures below.

First time starting the indicator:

----------------------------------

-please make sure that all 28 major pairs are listed in Market View window

-go trough all time frames and let the data load

", "url": "https://www.mql5.com/en/market/product/36092", "small_icon": "https://c.mql5.com/31/336/fx-market-correlation-logo-60x60-7394.png", "middle_icon": "https://c.mql5.com/31/441/fx-market-correlation-logo-140x140-2947.png", "icon": "https://c.mql5.com/31/336/fx-market-correlation-logo-200x200-8691.png", "rating": 5, "price": 69, "published": 1559595625, "popularity": 0, "category": "Indicator", "votes": 2 }, { "id": 36095, "title": "Robonacci Universal", "description": "

Robonacci Universal is designed to trade any markets (Stocks, Forex, Commodities, Futures, Cryptos). The strategies are developed based on various Price Actions that will be observed on different Fibonacci Retracement levels.

Product Home Page: https://www.mql5.com/en/market/product/36095

ADVANTAGES:

Works on any market and time frames
Multiple Strategies in 4 categories: Retracement, Breakout, Trend Follow, Reversal
Trades simultaneously on any number of markets under the same account
Display Fibonacci Retracement Levels while trading
Can do scalping or Hedging
Withdrawal Management, Daily Loss Limit and Equity Drawdown protection
Money based Hidden Stop Loss and Take Profit
Fibonacci Trailing, Percentage Trailing, ATR Trailing, Spike Trailing

FEATURES:

ALLOW_TRADE: True for trading ON and false for trading OFF

MaximumTrades: Maximum number of trades to open for any market. Minimum value is 1. A value more than 1 will activate Hedging mode

BarsToProcess: Number of bars to draw Fibonacci

DrawZigZagBasedFibo: Draw Fibonacci levels based on ZigZag. If true then BarsToProcess will not be in effect

ZigZagDepth: Value for ZigZag Depth

ZigZagDeviation: Value for ZigZag Deviation

ZigZagBackstep: Value for ZigZag Backstep

Trading_Start_Time: Session start time

Trading_Finish_Time: Session end time

*Start time must be earlier than finish time

Trading_Start_Day: Starting day of the week

Trading_Finish_Day: Ending day of the week

*Value from 0 to 6 where 0 represents Sunday and 6 is Saturday

Spread: Maximum spread to be allowed. Recommended 5-10. This value will be checked for opening, closing

Slippage: Maximum Slippage to be allowed. Recommended 3-5. This value will be checked for opening, closing

FixedLot: Set the value of fixed lot size if you want to use fixed lot only. UseAutoLot must be false in order to be effective.

UseAutoLot: Set to true if you want to use Auto lot rather than Fixed lot. When auto lot in use it is a good idea to withdraw profit every now and then

AutoLotRisks: Maximum risks in percentage when UseAutoLot is true. Recommended setting 0.01

LotDecreaseFactorIfLossOccurs: Reduce lot whenever loss happens. Minimum value is 0

LotIncreaseFactorIfWinsOccurs: Increase lot whenever wins happens. Minimum value is 0

FixedStopLoss: Fixed SL value in points. 0 for no stop

FixedTakeProfit: Fixed TP value in points. 0 for no target

*FixedStopLoss and FixedTakeProfit will not be in effect if UseAutoStopLossTakeProfit is true

UseAutoStopLossTakeProfit: Set to true to use auto stop loss and take profit value rather than fixed value.

StopLoss_Multiplier: Multiply stop loss value with the default stop loss value that the EA decides. Minimum value is 1

TakeProfit_Multiplier: Multiply take profit value with the default take profit value that the EA decides. Minimum value is 1

UseHiddenStopLossTakeProfit: Set to true to hide your original plan

HiddenStopLossInMoney: The idea is to place order with large stop or no stop at all and exit with a predetermined loss in money

HiddenTakeProfitInMoney: The idea is same as above

WithdrawPoint: Put your desired profit level target when you want the EA to enter into a safe mode. EA will not place any trade but only manage open trades until the withdraw is made

DailyLossLimit: Maximum loss of the day for each market. When limit reaches EA will close open trades and stop trading for the day

MaximunDrawdown: EA will stop trading when maximum equity drawdown occurs.

CloseProfitTradesAtTradingFinishTime: To close only profit trades when trading time is finished

CloseAllTradesAtTradingFinishTime: To close all trades when trading time is finished

UsePercentageTrailing: When more than 90% target achieved move stop loss at 80%. If HiddenTakeProfitInMoney is in use stop loss will be moved to nearest price when 90% target achieved

FibonacciTrailing: To trail based on Fibonacci levels

ATRTrailing: To trail based on ATR

SpikeTrailing: To trail based on large spikes

UseRetracementStrategy: True or False

UseBreakOutStrategy: True or False

UseReversalStrategy: True or False

UseTrendFollowStrategy: True or False

Attention!

This product has been released only on MQL5.COM. I do not sell this product on any other sites.

", "url": "https://www.mql5.com/en/market/product/36095", "small_icon": "https://c.mql5.com/31/310/robonacci-universal-logo-60x60-4788.png", "middle_icon": "https://c.mql5.com/31/445/robonacci-universal-logo-140x140-5388.png", "icon": "https://c.mql5.com/31/310/robonacci-universal-logo-200x200-8580.png", "rating": 0, "price": 0, "published": 1554419406, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36100, "title": "Wolfalizer", "description": "

The Wolfalizer Indicator combines the functionality of the Engulfing Stochastic along with the ConsecutiveRSI and adds alerts along with more detailed output to the journal. This Indicator will alert you when RSI or Stochastics cross into oversold or overbought. You can set the oversold and overbought levels for RSI and Stochastics separately. You can pick if you want an engulfing candle to appear on the cross or set a number of consecutive candles you would like to see.

\r\n

Interesting Inputs include:

\r\n

Turning on or off on-screen alerts
Push to phone alerts
Emailed alerts
Verbose mode gives additional details in the journal tab
Turn to check for consecutive candles on or off
The number of consecutive candles you would like to see at a cross
Turn to check for engulfing candles at crosses on or off
RSI settings
Stochastic settings

MT4 version https://www.mql5.com/en/market/product/36133

\r\n

This section is for the coders:

\r\n

   SetIndexBuffer(0,iRSIBuffer,INDICATOR_DATA);\r\n   SetIndexBuffer(1,bulloversold,INDICATOR_DATA);\r\n   SetIndexBuffer(2,bearoversold,INDICATOR_DATA);\r\n   SetIndexBuffer(3,bulloverbought,INDICATOR_DATA);\r\n   SetIndexBuffer(4,bearoverbought,INDICATOR_DATA);\r\n   SetIndexBuffer(5,StochasticBuffer,INDICATOR_DATA);\r\n   SetIndexBuffer(6,SignalBuffer,INDICATOR_DATA);\r\n   SetIndexBuffer(7,StochBullishOverSold,INDICATOR_DATA);\r\n   SetIndexBuffer(8,StochBearishOverSold,INDICATOR_DATA);\r\n   SetIndexBuffer(9,StochBullishOverBought,INDICATOR_DATA);\r\n   SetIndexBuffer(10,StochBearishOverBought,INDICATOR_DATA);\r\n   SetIndexBuffer(11,barNum,INDICATOR_DATA);

None NULL value when a signal is given.

", "url": "https://www.mql5.com/en/market/product/36100", "small_icon": "https://c.mql5.com/31/310/wolfalizer-logo-60x60-7219.png", "middle_icon": "https://c.mql5.com/31/438/wolfalizer-logo-140x140-1321.png", "icon": "https://c.mql5.com/31/310/wolfalizer-logo-200x200-4458.png", "rating": 0, "price": 37, "published": 1550717026, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36102, "title": "WOW Market Signal MT5", "description": "

The principle of this indicator is very simple: detecting the trend with Moving Average, then monitoring the return point of graph by using the crossing of Stochastic Oscillator and finally predicting BUY and SELL signal with arrows, alerts and notifications. The parameters are fixed and automatically calculated on each time frame.

Example:

If you install indicator on EURUSD, timeframe M5: the indicator will detect the main trend with the Moving Average on this timeframe (for example the Moving average indicates the \"up trend\" )
If indicator detects the \"up trend\", it will monitor for Stochastic Oscillator to show \"cross up\" of the main line / signal line at the below position the lower level.
Finally the indicator will show an \"up arrow\" in the chart window and send alert message with notification such as \"BUY EURUSD\"
If the indicator detects opposite conditions of above, it will show the opposite result.

Indicator Installation

Attach this indicator to the chart window of currency pairs.
The recommended currencies are EURUSD, GBPUSD, USDJPY, EURJPY, GBPJPY, USDCHF, GBPCHF
The recommended timeframes are M1, M5, M15, M30, H1, H4, D1

", "url": "https://www.mql5.com/en/market/product/36102", "small_icon": "https://c.mql5.com/31/310/wow-market-signal-mt5-logo-60x60-3607.png", "middle_icon": "https://c.mql5.com/31/446/wow-market-signal-mt5-logo-140x140-8523.png", "icon": "https://c.mql5.com/31/310/wow-market-signal-mt5-logo-200x200-2290.png", "rating": 0, "price": 135, "published": 1550718908, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36110, "title": "One click to close all", "description": "

One click to close all (OCCA) provides you posibility to close all open position with one click.
Here is no any settings, just run the script and all your open positions will be closed and it will happen very fast!

\r\n

Works with all types of accounts, with all currency pairs and any broker. The number of open positions is not limited.
The script will be useful for trading strategies, in which you need to manage a large number of positions.

", "url": "https://www.mql5.com/en/market/product/36110", "small_icon": "https://c.mql5.com/31/310/one-click-to-close-all-logo-60x60-9400.png", "middle_icon": "https://c.mql5.com/31/441/one-click-to-close-all-logo-140x140-5991.png", "icon": "https://c.mql5.com/31/310/one-click-to-close-all-logo-200x200-3325.png", "rating": 5, "price": 30, "published": 1550766868, "popularity": 0, "category": "Utility", "votes": 1 }, { "id": 36113, "title": "Directional Key To Change Symbols and TimeFrames", "description": "

Do you think it's a bit cumbersome when you need to switch symbols or timeframes with mouse click?

1. What is this?

This is a program that can switch symbols and timeframes with direction keys.

Fast switching, very convenient, no mouse click required.
For traders, one symbol with multi-timeframe charts are usually added, you can change symbol on those charts easily.
For multi-currency traders, different symbol charts are usually added, you can also change those timeframes easily.

I wrote this program in the form of indicator. So you can load other EAs, indicators or run other scripts.

2. How to use it

When you load the program:

The direction key UP is to switch to the previous symbol in market watch.

PS: When the chart is the first symbol, Key UP will switch to the last symbol.

The direction key DOWN is to switch to the next symbol in market watch.

PS: When the chart is the last symbol, Key DOWN will switch to the first symbol.

The direction key LEFT is to decrease the timeframes.

PS: When the timeframe is M1, Key LEFT will switch to the MN1 timeframe.

The direction key RIGHT is the increase time frame.

PS: When the timeframe is MN1, Key RIGHT will switch to the M1 timeframe.

3. Parameters:

bool TurnOn_UpDown=true; // Turn on the UP/DOWN key function to change Symbol.
bool TurnOn_LeftRight=true; // Turn on the LEFT/RIGHT key function to change TimeFrame.
bool AllTimeFrames=false; // Whether to use All Time Frames

=====The following options are used to change other open charts：

PS: I must tell you, when switching between multi charts, the system will download the data, If your system doesn't have data, it will download the data and sometime will cause slowdowns. That is the limited of MT5/MT4 client. When you don't have enough data, don't use the keyboard too quickly.

bool OtherOpenChart_Symbol = false; // Change symbol on other open chart?
bool OtherOpenChart_TimeFrame = false; // Change timeframe on other open chart?
int PermitCount = 0; // Just change the count of initially opened chart. 0 means all.

PS: when you want to change other charts, but not all the open charts. you can change the num.

The link is MT4 version: https://www.mql5.com/en/market/product/43106

", "url": "https://www.mql5.com/en/market/product/36113", "small_icon": "https://c.mql5.com/31/399/directional-key-to-change-symbols-and-timeframes-logo-60x60-5620.png", "middle_icon": "https://c.mql5.com/31/445/directional-key-to-change-symbols-and-timeframes-logo-140x140-9362.png", "icon": "https://c.mql5.com/31/399/directional-key-to-change-symbols-and-timeframes-logo-200x200-2329.png", "rating": 0, "price": 30, "published": 1550739928, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 36122, "title": "Smart Trading Signals", "description": "

It's a self-learning indicator.

You need to set a starting time and download the relevant historical data for it to learn.

Learn as few rules as possible and give the maximum freedom to the indicators.

Therefore, the principle of choosing the best outcome during the learning period does not guarantee that every transaction is profitable.

In general, the longer the study, the more reliable the results.

In the strategy tester, you need to set the time parameter before the test starts so that the indicator has enough time to learn.

Indicators signal a buy or sell, distinguished by the direction of the arrow.

The indicator will also send out closing signals that distinguish by different coloured dots.

", "url": "https://www.mql5.com/en/market/product/36122", "small_icon": "https://c.mql5.com/31/310/smart-trading-signals-logo-60x60-1186.png", "middle_icon": "https://c.mql5.com/31/445/smart-trading-signals-logo-140x140-1488.png", "icon": "https://c.mql5.com/31/310/smart-trading-signals-logo-200x200-5115.png", "rating": 0, "price": 30, "published": 1550763453, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36151, "title": "PZ Hedging EA MT5", "description": "

Your safety net to turn losing trades into winners

Have you ever taken a trade at literally the worst possible moment? Have you ever bought an asset just before a significant price crash?
Or perhaps you've gone short at the worst possible moment before a rip-off rally? I have. And it sucks. It's one of the worst feelings in the world. Like a kick in the groin. To come out unscathed and in profit from these situations, I developed PZ Hedging EA.

This EA will turn your losing trades into winners using a unique imbalanced hedging strategy. Once the initial trade moves into negative territory a predefined number of pips, the recovery mechanism will kick in: it will place a limited amount of alternative trades above and below the current price, until all of them can be closed with a small net profit.

Features

Easy to use and supervise
Trade easily using chart buttons
Fully customizable position management
Controlled and pre-calculated risk exposure
Implements many automated entry strategies
Trades micro accounts from $1,000
Filter trading by forex sessions

How to get started

Load the EA to any chart and timeframe
Edit the settings until the risk is acceptable
Trade using the chart buttons or Enable an entry strategy
Let the EA work and book a profit
Repeat!

The recovery will fail in a minority of cases, if the market stays flat for a long period of time. If it fails, it incurrs into a calculated loss.

Usage Tips

Load the EA and trade using the chart buttons
Don't trade any other EA in the same symbol
Take only one initial trade per symbol -never two or more-
If the buy/sell buttons are not displayed, it means the EA is busy
The EA can trade many symbols independently at the same time
But be careful: never, ever, load the EA twice on the same symbol
There is no need to set a different Magic Number to trade different symbols
Trade from a VPS or leave your trading computer turned on 24/5
Try to never unload the EA to assure the atomicity of the process
Big spread hikes affect the EA negatively. If possible, trade from a fixed spread account
In fixed spread accounts, using a small zone proves beneficial for performance
However, a safe zone for variable spread accounts is +100 pips
Avoid taking a trade if you expect the market to stay flat

The purpose of this EA is not to be profitable by itself, but to avoid preventable losses within the limits of the account free margin.

Technical Information

The automated entries of the EA are evaluated at bar closing
The EA uses pending orders, connection lag should not be an issue
The EA won't trade live if there is risk of a margin call with current settings
However, the EA will trade in the tester with any settings, regardless of risk
The take-profit for the first trade is evaluated in stealth mode, no TP order is placed
The EA trades a manual lot size: the tester won't reflect compounding profits
The session filters are implemented in GMT time and only apply to automated entries
Trades have no individual SL or TP because they are managed as a basket (a single deal)
During a recovery, the EA can have many trades opened at the same time
If the market gaps and a pending order is missed, the EA will hedge at market

Input Parameters

Lotsize: Lot size of the initial trade.
Break-even: Profit in pips at which the EA moves the stop-loss above/below the open price for the first trade.
Break-even Behavior: Upon breakeven, the SL can be moved to the open price, or secure part of the profits.
Trailing Stop: Trailing stop expressed as % of current trade profit.
Trailing Step: Minimum increase in pips for the trailing stop.
Take Profit: Stealth take profit for the first trade.
Entry Strategy: The EA implements some automated entry strategies to facilitate backtesting.
Trades: Max amount of trades to place during the recovery process
Zone: Distance in pips between the alternative orders in the recovery process
Behavior: The level of aggression of the recovery process
Profit Target: Profit target in pips for the recovery process
Trade Asian Session: Enable auto-trading during asian session
Trade European Session: Enable auto-trading during europe session
Trade American Session: Enable auto-trading during american session
Magic Number: The EA uses the magic number to identify its trades
Custom Comment: Enter your custom comment for trades

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.
", "url": "https://www.mql5.com/en/market/product/36151", "small_icon": "https://c.mql5.com/31/310/pz-hedging-ea-mt5-logo-60x60-6125.png", "middle_icon": "https://c.mql5.com/31/445/pz-hedging-ea-mt5-logo-140x140-2920.png", "icon": "https://c.mql5.com/31/310/pz-hedging-ea-mt5-logo-200x200-3469.png", "rating": 3.4000000953674316, "price": 149, "published": 1550859097, "popularity": 0, "category": "Expert", "votes": 5 }, { "id": 36155, "title": "PZ Stop And Reverse EA MT5", "description": "

This EA recovers losing trades using a sequential and controlled martingale: it places consecutive trades with increasing lot sizes until the initial trade is recovered, plus a small profit. It offers a complete hassle-free trading framework, from managing initial trades to recovery. Please note that the EA implements a martingale, which means that it takes balance losses that are recovered later.

Features

Easy to use and supervise
Trade easily using chart buttons
Works on netting and hedging accounts
Controlled and pre-calculated risk exposure
Implements many automated entry strategies
All orders are placed with a stop-loss
Trades micro accounts from $1,000
Filter trading by forex sessions
NFA/FIFO compliant

How to get started

Load the EA to any chart and timeframe
Edit the settings until the risk is acceptable
Start a trade using the chart buttons or...
Enable an entry strategy from inputs
Let the EA handle the trade and book a profit
Repeat!

The recovery will fail in a minority of cases. If it fails, it incurrs into a calculated loss.

Usage Tips

Load the EA and trade using the buy or sell buttons
Never force a buy and sell at the same time. Take one initial trade
If the buy/sell buttons are not displayed, it means the EA is busy
The EA can trade many symbols independently at the same time
But be careful: never, ever, load the EA twice on the same symbol
There is no need to set a different Magic Number to trade different symbols
Trade from a VPS or leave your trading computer turned on 24/5
Try to never unload the EA to assure the atomicity of the martingale
You can change the martingale behavior on the fly at any time
If possible, trade from a fixed spread account

The purpose of this EA is not to be profitable by itself, but to avoid preventable losses within the limits of the free margin.

Technical Information

The automated entries of the EA are evaluated at bar closing
The EA uses pending orders, connection lag should not be an issue
The EA won't trade live if there is risk of a margin call with current settings
However, the EA will trade in the tester with any settings, regardless of risk
The EA trades a manual lot size: the tester won't reflect compounding profits
The session filters are implemented in GMT time and only apply to automated entries
The EA will have just one open trade at any given time, and one pending order
Every single trade has a stop-loss order

Input Parameters

Lotsize: Lot size of the initial trade.
Break-even: Profit in pips at which the EA moves the stop-loss above/below the open price for the first trade.
Break-even Behavior: Upon breakeven, the SL can be moved to the open price, or secure part of the profits.
Trailing Stop: Trailing stop expressed as % of current trade profit.
Trailing Step: Minimum increase in pips for the trailing stop.
Take Profit: Take-profit for the first trade.
Entry Strategy: The EA implements a some automated entry strategies to facilitate backtesting. Options are: CCI, ADX, RSI, Bollinger Bands, AC, AO, Alligator, MACD, PSAR, RVI, Stochastic, Heiken Ashi, Turtle Trading, Breakouts, Buy Constantly and Sell Constantly.
Trades: Max amount of trades to place during the recovery process.
Zone: Distance in pips between the current order and the next order in the martingale.
Trade Asian Session: Enable auto-trading during asian session.
Trade European Session: Enable auto-trading during europe session.
Trade American Session: Enable auto-trading during american session.
Magic Number: The EA uses the magic number to identify its trades.
Custom Comment: Enter your custom comment for all trades here.

Resources

Support and questions

Use the helpdesk for questions or timely support. Write an email to: help [at] pointzero-trading.com.

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.", "url": "https://www.mql5.com/en/market/product/36155", "small_icon": "https://c.mql5.com/31/310/pz-stop-and-reverse-ea-mt5-logo-60x60-6085.png", "middle_icon": "https://c.mql5.com/31/446/pz-stop-and-reverse-ea-mt5-logo-140x140-9281.png", "icon": "https://c.mql5.com/31/310/pz-stop-and-reverse-ea-mt5-logo-200x200-9064.png", "rating": 5, "price": 149, "published": 1550844828, "popularity": 0, "category": "Expert", "votes": 1 }, { "id": 36161, "title": "Stock Trader Pro MT5", "description": "

Download Presets >> and Backtests >>

Live Signal #1 (Admiral Markets, Risk 2%)

Lite version of Stock Trader Pro Product page >>

>> Announcements Channel <<

Stock Trader Pro MT5 is a long-term investment Expert Advisor for the US stock market, built around a systematic “buy the dip” approach with strict risk control.

The strategy is based on a well-known market behavior: in developed equity markets, price often moves in impulsive growth phases, followed by temporary corrective pullbacks. Instead of chasing breakouts or holding positions without protection, Stock Trader Pro is designed to enter only during controlled pullbacks inside a broader bullish market structure, while every trade is protected by a predefined Stop Loss.

This approach differs fundamentally from classical Buy & Hold:

positions are not opened blindly and are not held indefinitely,
each entry is validated by technical conditions across multiple timeframes,
downside risk is explicitly limited at the moment of trade execution.

The Expert Advisor operates in a low-frequency, selective trading mode, prioritizing quality of setups over quantity of trades. Its primary objective is to participate in medium- to long-term upward movements of stocks while avoiding high-risk market regimes, such as strong bearish phases or panic-driven sell-offs.

Stock Trader Pro supports a wide range of US stocks, including (Download Presets >> and Backtests >>):

AAPL, AMZN, AXP, CAT, DELL, GD, GOOGL, JNJ, JPM, KO, LMT, MA, MCD, META, MSFT, NOC, ORCL, PG, TSLA, V, WMT

S&P 500 Market Regime Filter

Stock Trader Pro introduces an advanced S&P 500 trend filter, designed to protect the system during periods of market stress and high volatility.

The filter automatically blocks trading during market crashes and turbulent conditions
Helps avoid trading during large-scale sell-offs and panic-driven moves (e.g. COVID crash, macro-economic shocks)
Improves capital protection and reduces prolonged stagnation phases

How to configure the S&P 500 filter (symbol selection in Market Watch) here >>

Designed for Long-Term Investments

Stock Trader Pro is designed as a long-term investment Expert Advisor focused on systematic profit accumulation through controlled risk exposure.The strategy operates in a low-frequency, position-based mode, prioritizing trade quality and capital preservation over aggressive short-term trading.

The Expert Advisor can be used on both netting and hedging account types and is compatible with leveraged as well as non-leveraged (cash) accounts, depending on broker specifications.

The system does not rely on high leverage and is intended for trading real stocks or stock CFDs, subject to instrument availability and contract conditions provided by the broker.

Minimum recommended account balance: from $1,000. The required deposit may vary depending on traded symbols, broker conditions, and minimum trade size.

Key Features & Advantages

Exclusively Long Positions:
Stock Trader Pro opens only long positions, operating under the assumption of a long-term upward bias historically observed in the US equity market, as reflected by major broad-market indices such as the S&P 500.
Technical Analysis:
The strategy employs several technical indicators—including Moving Average, ATR, Stochastic, and RSI—to generate trading signals. Each trade is equipped with built-in Stop Loss and Take Profit levels, reflecting a conservative approach with a limited number of trades.
Customizable & Versatile:
All input parameters are available for adjustment, allowing you to fine-tune the system or create your own presets. This design also permits adaptation to other stocks or markets if desired.
Risk Management:
Stock Trader Pro is built with risk management in mind and avoids methods such as Martingale or Grid strategies. Its conservative approach, with a low number of trades, is intended to help reduce drawdowns.

", "url": "https://www.mql5.com/en/market/product/36161", "small_icon": "https://c.mql5.com/31/1722/stock-trader-pro-mt5-logo-60x60-9974.png", "middle_icon": "https://c.mql5.com/31/1722/stock-trader-pro-mt5-logo-140x140-3048.png", "icon": "https://c.mql5.com/31/1722/stock-trader-pro-mt5-logo-200x200-5787.png", "rating": 4.692307472229004, "price": 799, "published": 1587399813, "popularity": 0, "category": "Expert", "votes": 13 }, { "id": 36183, "title": "Candle Transition", "description": "According to trading experience:

Some symbols are easy to reverse on certain days, such as Monday, or afternoon, and so on. So comparing the current price with the corresponding historical moment price is valuable.
If the price coordinate system uses a logarithmic price, you will get a lot of valuable information.

1. What is this?

\r\n

This program can convert the symbol price and add it to your Chart. You can compare it with your major chart.
\r\n
The DEMO version Link:https://www.mql5.com/en/market/product/36198/

2. Function

\r\n

You can enter the symbol you want, which can watch multiple Symbols on a single Chart.
Time to match : Unified the Candle line corresponding to the time.Some Symbols have less than 24 hours of trading per day, so matching the time is required.
The price coordinates have original mode and logarithmic mode.
You can choose the degree of lag of Candle. For example, the current Chart is 2019-2-22 on Friday, you can choose to overlay the symbol of previous Friday.
you can identify lag time for convenience.

\r\n

3. How to use

\r\n

Parameter:

\r\n

Input_Forex=\"\"; //Input your symbol, default chart symbol.
CoordinateMode=Original; //Price Coordinate mode: Original / Logarithm.
LagUnit=W1; //The added Candle's Lag Unit.

Also LagUnit can be selected D1/H12/H8... That means the basic unit of lag.

LagCount=1; //The added Candle's Lag Count.

if LagUnit=W1 and LagCount=2, That means total lag of 2 weeks.

color BullCandle=clrRed; //Set Bull Candle Color
color BearCandle=clrBlue; //Set Bear Candle Color
color OtherCandle=clrBlack; //Set Other Candle Color

PS:

If you don't have data on your system, you might encounter the following: Suddenly nothing can be seen, which means your system is downloading data. Because I added the ability to download data in this program.

", "url": "https://www.mql5.com/en/market/product/36183", "small_icon": "https://c.mql5.com/31/310/candle-transition-logo-60x60-6136.png", "middle_icon": "https://c.mql5.com/31/440/candle-transition-logo-140x140-3388.png", "icon": "https://c.mql5.com/31/310/candle-transition-logo-200x200-2316.png", "rating": 0, "price": 30, "published": 1550981119, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36217, "title": "DBS Cluster Search", "description": "

Professional traders know that volume is the fuel for price movement. Large players try to hide their true intentions, but they can be recognized by volume bursts. The standard vertical volume does not show us specific price levels, but the cluster volume and especially its surges provide a very clear picture and specific price levels (areas).

The DBS Cluster Search indicator searches for clusters of the specified size in tick data and highlights them with colored figures on the chart. These levels (areas) in the future are often the starting point of a strong price movement. The indicator can, when calculating, combine clusters at several adjacent price levels, which gives greater value and weight in the forecast.

ATTENTION! TICK HISTORY DATA AND REAL EXCHANGE VOLUMES ARE REQUIRED FOR THE INDICATOR TO OPERATE! THE INDICATOR WORKS ONLY ON EXCHANGE INSTRUMENTS!

The indicator is calculated from the tick history, therefore, to speed up the calculations and reduce the load on the system, the number of bars for calculation is specified in the parameters.

Input parameters:

Number of bars to calculate - The number of bars to calculate the indicator.
Minimum for highlight - Minimum cluster size for selection.
Maximum for highlight (0-unlim.) - Maximum cluster size for selection (0 - no limit).
Price levels to combine - How many price levels combine to cluster. Combining 2x-3x neighboring price levels gives greater predictive value.
Form shapes - You can select \"Ellipse\", \"Rectangle\" and \"Triangle.\"
Color of the figure - The color of the figure.
Thickness of the figure - The thickness of the outline of the figure.
Fill of the figure - Fill the shape (No/Yes). When superimposing several shapes on each other, due to the algorithms for drawing graphical objects in MT, the display is not entirely correct.
Figure in the foreground - The location of the figure in the foreground chart or on the background on chart.
Show information in the log - Show or not extended information in the log. (No/Yes).

It is possible to place several indicators on one chart (for example, to highlight several ranges of clusters with different colors or types of shapes).

", "url": "https://www.mql5.com/en/market/product/36217", "small_icon": "https://c.mql5.com/31/312/dbs-cluster-search-logo-60x60-2938.png", "middle_icon": "https://c.mql5.com/31/442/dbs-cluster-search-logo-140x140-6977.png", "icon": "https://c.mql5.com/31/311/dbs-clustersearch-logo-200x200-2639.png", "rating": 0, "price": 45, "published": 1614845867, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36223, "title": "Time Adjusted ATR", "description": "

Time Adjusted ATR

The Time Adjusted ATR indicator is used to determine the anomalous volatility for exactly specified time of day. The indicator is useful for early identification of reversals, breakthroughs and considering volatility corrections.

Options

• ATR period: the number of bars of the standard ATR indicator for which the averaging is taken (recommended value = 1).

• Normalized Base: how many days (bars) are used to calculate normalization (recommended value = 10 ~ 50).

How is \"Time Adjusted ATR\" calculated?

• Let's say a 9-hour bar has formed on the H1 chart. If the parameters ATR period = 1 and Normalized Base = 10 are set, the average value of the standard ATR is taken at the same time (at 9 o'clock) yesterday, the day before yesterday, etc. ... in 10 days.

** (if ATR period = 3, the average for 3 bars is taken - 9 hours, 8 hours, 7 hours).

• The current standard ATR value is divided by the average and displayed on the indicator chart (green and red bars on each bar).

Similarly, the indicator value is calculated at a specified time on other timeframes. Time Adjusted ATR is suitable for M1 ~ H4 timeframes. Obviously, using this indicator on D1 and higher timeframes is meaningless.

Difference from standard ATR

A typical normal ATP, for example, with a period of 20, looks like a smoothed sine wave and always contains a lot of noise. Using normal ATR, it is difficult to determine the anomalous volatility for a given moment of the day, especially consolidation or at night, when the volatility is low.

Time Adjusted ATR will take into account the volatility correction for the specified time of day and show a clear surge.

Examples of use in the strategies

The Time Adjusted ATR indicator helps to suggest an extreme or a local reversal and to find a more accurate early point of opening or leaving a position. Before a reversal, the indicator will show a pre-emptive peak, as well as help confirm the approach to important price level.

When forming a pattern or approach to the price level (for example, on M30, H1, H4 timeframes), we switch to a small timeframe (M1, M5, M15), determine the high atypical volatility and, considering the bar direction, set the necessary order.

Time Adjusted ATR with a low value is also useful - for example, with narrow consolidation while waiting for a breakdown and opening a session.

Time Adjusted ATR is not recalculated or delayed, since normalization occurs at a specific time of day (the “physiological” market cycle is taken into account).

Time Adjusted ATR significantly simplifies market perception. We wish you successful trading.

", "url": "https://www.mql5.com/en/market/product/36223", "small_icon": "https://c.mql5.com/31/311/time-adjusted-atr-logo-60x60-9300.png", "middle_icon": "https://c.mql5.com/31/441/time-adjusted-atr-logo-140x140-3855.png", "icon": "https://c.mql5.com/31/311/time-adjusted-atr-logo-200x200-7497.png", "rating": 0, "price": 30, "published": 1551039249, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36233, "title": "Gamma Bands MT5", "description": "

Gamma Bands

This indcator shows the trend with the color histogram. It is simple and easy to use.

Usage:

If the histogram changes from the aqua to the fuchsia, which means the trend is up.
If the histogram changes from the fuchsia to the aqua,which means the trend is down.

Inputs:

MaPeriods: the periods of moving average.
f1: the multiplier of inner bands
f2: the multiplier of outer bands
Popup Window Alert
Email Alert
Mobile Push Alert

Alerts

When the trend changes for the long trend to the short trend or vice versa.
When price crosses up the outter band,alert for closing buy orders.
When price crosses down the outer band, alert for closing sell orders.

Version for MT4: Gamma Bands

", "url": "https://www.mql5.com/en/market/product/36233", "small_icon": "https://c.mql5.com/31/311/gamma-bands-mt5-logo-60x60-4257.png", "middle_icon": "https://c.mql5.com/31/445/gamma-bands-mt5-logo-140x140-7256.png", "icon": "https://c.mql5.com/31/311/gamma-bands-mt5-logo-200x200-1907.png", "rating": 0, "price": 30, "published": 1551074859, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36301, "title": "WebDataExtractor MT5", "description": "

This is a non-trading expert which transforms unstructured web-pages into structured data tables. It downloads and parses an HTML file, then creates DOM (Document Object Model) for it, and finally applies specified CSS (Cascading Style Sheets) selectors for required fields and extracts data for them. You may consider it as a powerful and highly customizable HTML to CSV (Comma-Separated Values) converter.

The EA can process web-pages from remote sites (using MetaTrader's WebRequest) or local files. To use WebRequest properly make sure you added corresponding domains in the Expert Advisors options dialog.

Demo version of the expert or its full version running in the tester cannot use WebRequests, because of MetaTrader limitation. Only local files are accessible from the tester.

The expert is useful for reading economic news, trading reports, and other information available in Internet but hardly \"understandable\" by programs due to loose formatting and rich user-friendly decorations in web-pages.

The demo version of the expert randomly chooses some data fields in extracted data and replaces them with the string \"demo\". This is done intentionally to prevent a possible use of the demo version for smooth extraction of complete data sets in production.

Parameters

URL - web-page address (starts with http:// or https://) or local file name to load (must be in HTML format);
SaveName - output file name (will be in CSV format);
TimerSeconds - period in seconds to reload the URL and process it again; if 0 - the expert does the job only once and then exits;
TriggerVariable - optional global variable to check with the timer; if it's specified, the expert checks if the variable exists: if yes - EA starts processing and then removes the variable, if not - EA skips this timer invocation and keeps waiting for next time to check again;
RowSelector - CSS selector for table row;
ColumnSettingsFile - file in CSV format with selectors for columns (see comments for details);
SubstitutionSettingsFile - optional file in CSV format for data substitution rules (see comments for details);
TestQuery - test a CSS selector for a row;
TestSubQuery - test a CSS selector for a field in the row;
LogXXX - enable/disable XXX logging option;

Main Principles

In order to start data extraction using this expert you need to investigate source code (HTML) of the target web-page. This can be done in any modern browser by means of its built-in tools for web-developers. For example, in Chrome you may open \"Developer tools\" window by clicking \"Settings\" button (in the upper right corner of the main window), then choosing \"Tools\" -> \"Developer Tools\" in the dropdown menu (the menu items may vary between different browser versions). Please find more details in the official DevTools overview. What is important for us here is the section Inspecting the DOM.

User should locate all data fields of the interest in the web-page and lookup corresponding DOM elements in HTML source. Based on specific attributes of the DOM elements, one should elaborate suitable CSS selectors which will unambiguously pin down a value for every specific data field. The developer window provides a console box, where you can try CSS selectors on the fly. Please, make sure you're trying only those selectors supported by the expert.

Alternatively you can enable DOM logging in the expert (LogDomElements) and then study output in the experts log of MetaTrader. This method lacks interactivity (you can not try selectors right away), but it does not require to deal with external tools. You can test selectors using corresponding input parameters (TestQuery and TestSubQuery). It's advisable to run such experiments on a local file (URL should point to a file instead of Internet address). You can download a web-page from a site into a file using the following parameters: URL - Internet address of the page, SaveName - name of the local file to write (existing file, if any, will be overwritten), RowSelector should be empty.

Supported CSS selectors

Please find the list of supported selectors in the comments.

Examples

Examples are provided in the comments for this product. For every example, HTML fragment can be found with comments added for explanations, and formatting changed for readability.

", "url": "https://www.mql5.com/en/market/product/36301", "small_icon": "https://c.mql5.com/31/311/webdataextractor-mt5-logo-60x60-3246.png", "middle_icon": "https://c.mql5.com/31/441/webdataextractor-mt5-logo-140x140-6394.png", "icon": "https://c.mql5.com/31/311/webdataextractor-mt5-logo-200x200-4694.png", "rating": 0, "price": 35, "published": 1551223624, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 36320, "title": "CCI Dashboard for MT5", "description": "

Multicurrency and multitimeframe modification of the Commodity Channel Index (CCI) indicator. You can specify any desired currencies and timeframes in the parameters. Also, the panel can send notifications when crossing overbought and oversold levels. By clicking on a cell with a period, this symbol and period will be opened. This is MTF Scanner.

The key to hide the dashboard from the chart is \"D\" by default.

Parameters

CCI Period — averaging period.
CCI Applied price — price type.
Clear the chart at startup — clear the chart at startup.
Set of Pairs — set of symbols

— Market Watch — pairs from the \"Market Watch\" of the MT;
— Specified manually — pairs specified manually, in the parameters \"Pairs\".
— Current pair.

Pairs (separated by a space or semicolon) — list of symbols separated by spaces or semicolons. The currency names should be written exactly like the broker's, keeping the case and prefix/suffix.
Time Frames (separated by a space or semicolon) — list of timeframes separated by spaces or semicolons (multi timeframe).
Sort pairs — sorting the list of pairs.
Position on chart — corner to display the panel on the chart.
X offset (pix) — shift the panel along the X axis.
Y offset (pix) — shift the panel along the Y axis.
Allow to move the table manually.
Refresh dashboard every (seconds) — update period for all pairs and timeframes.
Open the pair in a new window — open a symbol in a new chart window by clicking.
Chart template — the name of the template for the chart, if the chart opens in a new window.
Coloring the cells according to the — paint the cells of the table according to the levels of overbought/oversold or according to the direction of the previous candle.
Color Up — cell color if the indicator increases.
Color Down — cell color if the indicator decreases.
Color Stop — cell color if the indicator does not change.
Transparency (0-255) — transparency of the panel.
Font name — font name.
Font size — font size.

Alerts

Timeframes for alerts (separated by a space or semicolon) — list of periods for which the alert will be sent (separated by a space or semicolon).
Overbought level — overbought level for alerts.
Oversold level — oversold level for alerts.
Check alerts only on bar closing — check level crossing only after bar closing.
Enable overbought alerts.
Enable oversold alerts.
Enable zero crossing alerts.
Alert mode

— separated by timeframes — send alerts only from individual TFs.
— combined in a row — send an alert only when all TFs are in the same direction.
— all alerts — both modes.

Pop up alert — pop-up alert.
Push notifications — push notification.
E-mail notifications — e-mail notification.
Sound alert — sound alert.

Popup chart

Enable Popup chart

Candle size

Width (pix)

Height (pix)

Font size

Transparency (0-255).

", "url": "https://www.mql5.com/en/market/product/36320", "small_icon": "https://c.mql5.com/31/311/cci-dashboard-for-mt5-logo-60x60-5785.png", "middle_icon": "https://c.mql5.com/31/441/cci-dashboard-for-mt5-logo-140x140-4678.png", "icon": "https://c.mql5.com/31/311/cci-dashboard-for-mt5-logo-200x200-9211.png", "rating": 5, "price": 37.5, "published": 1551271549, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 36329, "title": "AJiBoLangMT5", "description": "

This AJiBoLang indicator is suitable for all cycles of the signal, very suitable for short-term signals, the signal accuracy is good.

Just look at the arrows on the chart and make a single order. The green arrow is the Buy single and the red arrow is the Sell single.

After making the Buy order, if the yellow line goes up to the upper level and travels a certain distance, then you can sell the Buy order.

After making the Sell single, if the yellow line goes to the lower level and travels a certain distance, then the Sell order can be sold.

If the yellow line is in the middle and you haven't made any orders yet, then if the yellow line folds back up, you can make a Buy order, and the accuracy of this order will be higher.

If the yellow line is in the middle and you haven't made any orders yet, then if the yellow line folds back down, you can do a Sell single, and the accuracy of this order will be higher.

Parameter Description:

[alert_NO_OFF]: This is the alarm switch, set to true, if the arrow appears, it will automatically alert the prompt; if set to false, it will not alert.

[sendmail_NO_OFF]: This is the switch to send mail, set to true, if the arrow appears, it will send the mail to the mailbox you set in MT5; if it is set to false, it will not send mail.

[sendnotification_NO_OFF]: This is the switch to send instant messages, set to true, send an message to your mobile device if an arrow appears; set to false, no message will be sent.

[UP_Line]: This is the upper horizontal line of the indicator. The default is 85.

[DOWN_Line]: This is the lower horizontal line of the indicator. The default is 15.

", "url": "https://www.mql5.com/en/market/product/36329", "small_icon": "https://c.mql5.com/31/311/ajibolangmt5-logo-60x60-6270.png", "middle_icon": "https://c.mql5.com/31/441/ajibolangmt5-logo-140x140-7441.png", "icon": "https://c.mql5.com/31/311/ajibolangmt5-logo-200x200-7852.png", "rating": 0, "price": 58, "published": 1551286826, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36330, "title": "VWAPBands", "description": "

\r\n This indicator calculates the Daily VWAP and projects its Bands in 3 upper levels and 3 lower levels (Supports and Resistances), offset by the \r\n Standard Deviation selected by the user. \r\n

\r\n\r\n\r\n

\r\n
\r\n

\r\n\r\n\r\n

\r\n How to configure: \r\n

\r\n\r\n\r\n

\r\n

Choose the symbol and the desired graphic time;
Choose the type of price that is most suitable to calculate the Desired VWAP;
Choose whether or not you want the Bands to be plotted;
Choose the type of Volume you want to use (Ticks or Real);
Choose the type of Calculation of the Bands (Deviation of Prices, Deviation of Prices in relation to VWAP, Deviation of Daily VWAP, \r\n Deviation of Price in relation to VWAP of Dollar in an Annualized Tick basis);
Choose how many Deviations you want to use to plot the Bands;
Choose how many candles you want to calculate deviations;

\r\n\r\n\r\n

\r\n

\r\n You can also use this indicator to obtain the Supports / Resistance by the MIDAS method. For this you must: \r\n

\r\n\r\n\r\n

\r\n

Determine in the \"Begin Plot\" parameter the date and time of the BASE candle;
Determines the VWAP Approach parameter to \"MIDAS\";
Determine the type of prices such as HIGH for Upper Midas, LOW for Lower Midas;
Okay, you got the Support / Resistance by the MIDAS method. Use the Bands to have better regions.

\r\n\r\n\r\n

\r\n

Finally, you can also obtain VWAP from the most recent HIGH VOLUME bar, from the period selected in the \"Begin Plot\" field:

\r\n

Determine in the \"Begin Plot\" parameter the start date of the highest volume candle;
Determine the VWAP Approach parameter for \"Highest Volume Bar\";
Other parameters according to the user's taste;
The Plot will be from the most recent highest volume candle, any past before that will be ignored.

\r\n

\r\n\r\n\r\n

\r\n

VWAP is an abbreviation for Volume Weighted Average Price. So, it is an average of the prices negotiated in a given period, weighted by the \r\n volume traded in these prices, serving for many as a level of \"fight\" because the players who made this average price have no interest in \r\n \"losing\" their average price . The bands are the points that we can consider for entering and leaving operations, according to their \r\n operation, also serving as price supports / resistances.

\r\n

This indicator INCLUDES the current candlestick data, which means that you will always get the most recent values!

", "url": "https://www.mql5.com/en/market/product/36330", "small_icon": "https://c.mql5.com/31/420/vwapbands-logo-60x60-4352.png", "middle_icon": "https://c.mql5.com/31/441/vwapbands-logo-140x140-8154.png", "icon": "https://c.mql5.com/31/420/vwapbands-logo-200x200-9862.png", "rating": 0, "price": 39.9, "published": 1588350706, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36339, "title": "Fractional calculus Indicator", "description": "

From https://en.wikipedia.org/wiki/Fractional_calculus:

\r\n

Fractional calculus is a branch of mathematical analysis that studies the several different possibilities of defining real number powers or complex number powers of the differentiation operator D

\r\n

This indicator execute fracional differentiation on data, you can select the differentiation D value and execute some tweaks like execute Log(value) before difefrentiation or execute a window normalization on last [diffNormalizeWindow] values, you can cut max and min values too

\r\n

A second version of this indicator execute OHLC charts, check it at market

\r\n

Fractional differentiation try to recover some kind of memory from timeseries instead of raw diferentiation, this give some kind of stationarity to data without losing memory, try yourself :)

", "url": "https://www.mql5.com/en/market/product/36339", "small_icon": "https://c.mql5.com/31/312/fractional-calculus-indicator-logo-60x60-2392.png", "middle_icon": "https://c.mql5.com/31/445/fractional-calculus-indicator-logo-140x140-2551.png", "icon": "https://c.mql5.com/31/312/fractional-calculus-indicator-logo-200x200-8596.png", "rating": 0, "price": 0, "published": 1551321000, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36390, "title": "Binary RSI", "url": "https://www.mql5.com/en/market/product/36390", "small_icon": "https://c.mql5.com/31/312/binary-rsi-logo-60x60-8267.png", "middle_icon": "https://c.mql5.com/31/440/binary-rsi-logo-140x140-2267.png", "icon": "https://c.mql5.com/31/312/binary-rsi-logo-200x200-7500.png", "rating": 0, "price": 0, "published": 1551944013, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36394, "title": "Stochastic Signals", "description": "

This indicator implements the well-known trend trading strategy for Stochastic, with two levels for purchases (40 and 80) and two levels for sales (60 and 20). When an upward movement begins, the oversold level rises, from 20 to 40. When there is a downward movement, the overbought level goes down, from 80 to 60. Thus, the strategy has 4 levels. Obviously, tracking signals using the usual 4-level Stochastic is not very convenient, therefore, this indicator illuminates the inputs and outputs with the help of arrows and sends notifications of signals to email, a mobile device, and also outputs signals using alerts if corresponding functions are included in the input parameters. Also, the tracking of the upward or downward movements can be enabled in the input parameters or by using the corresponding buttons of the user interface, as shown in the figure. Then the indicator will give signals only for the selected direction of movement.

The indicator works on all accounts, but for a more successful application it is recommended to choose a free broker.

Input parameters

kPeriod - K-period Stochastic
slowing - slowing Stochastic
MA_Method - smoothing type Stochastic
priceField - calculation method Stochastic
closeSellLv - level closing sales
openSellLv - level opening sales
closeBuyLv - level closing buys
openBuyLv - level opening buys
signalBar - signal bar
shortEntry - entry in short positions
longEntry - entry in long positions
testNotif - to send test notification to mail and mobile device
mailSend - tо send notifications of signals by mail
notifSend - to send alert notifications to a mobile device
alert - signals in alerts

\r\n

D-period Stochastic is always 1

\r\n

", "url": "https://www.mql5.com/en/market/product/36394", "small_icon": "https://c.mql5.com/31/312/stochastic-signals-logo-60x60-4795.png", "middle_icon": "https://c.mql5.com/31/438/stochastic-signals-logo-140x140-6886.png", "icon": "https://c.mql5.com/31/312/stochastic-signals-logo-200x200-2286.png", "rating": 0, "price": 45, "published": 1551808638, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36420, "title": "TradeLeader Dolar Pontos Decisivos", "url": "https://www.mql5.com/en/market/product/36420", "small_icon": "https://c.mql5.com/31/312/tradeleader-dolar-pontos-decisivos-logo-60x60-6091.png", "middle_icon": "https://c.mql5.com/31/445/tradeleader-dolar-pontos-decisivos-logo-140x140-4722.png", "icon": "https://c.mql5.com/31/312/tradeleader-dolar-pontos-decisivos-logo-200x200-6533.png", "rating": 0, "price": 40, "published": 1551965469, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36466, "title": "CCI Signal For MT5", "description": "

CCI Signal

This indicator is based on a custom CCI that is colored to reflect the trend. It was created with the idea in mind: \"THE TREND IS YOUR FRIEND\".

It is simple and easy to use. Even a newbie can understand and use it to achieve great trade results. Simply follow the colors. RED means SELL. GREEN means BUY.

It DOES NOT repaint and can be used for Scalping, Day Trading and Swing Trading. It can be used for any time-frame and any currency pair.

CCI Signal is highly reliable and provides powerful signals.

NB:

Follow the indicator by the colors

Bright RED signifies strong SELL
Dull RED signifies weak SELL (so you may want to take profit or use trailing stop)
Bright Green signifies strong BUY
Dull GREEN signifies weak SELL (take profit or use trailing stop)

RECOMMENDATION:

In as much as this indicator can be used alone, you can combine it with my other indicator called, \"FRIENDLY TREND\".

The two when used together, confirms and authenticates each other to produce very powerful trade signals. They work together in that powerful manner.

The link to Friendly Trend is: https://www.mql5.com/en/market/product/31361

\r\n

PLEASE CHECK MY OTHER PRODUCTS HERE:

https://www.mql5.com/en/users/4fb974a7/seller#products

", "url": "https://www.mql5.com/en/market/product/36466", "small_icon": "https://c.mql5.com/31/313/cci-signal-for-mt5-logo-60x60-4860.png", "middle_icon": "https://c.mql5.com/31/441/cci-signal-for-mt5-logo-140x140-6159.png", "icon": "https://c.mql5.com/31/313/cci-signal-for-mt5-logo-200x200-8437.png", "rating": 5, "price": 50, "published": 1551700058, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 36473, "title": "Smart DOM Driver", "description": "

The utility displays the order book, as well as increases its depth, remembering the location of applications that have gone beyond the current \"window\" view.

With the utility user can perform quick trading actions in one click - placing/cancelling/editing of explicit and hidden orders, and also opening/editing positions.

Utility features

The orders book display works only on those trading symbols for which it is broadcast by the broker.

To reset the information about the rows that were recorded in the Smart mode, switch the indicator to the Fixation mode and double-click on the orders book title.

For currency pairs, as a rule, the deals tape is not broadcast, so the input variable ProfileCalculation must be switched to the Interpretation state. In addition, it is desirable to use the input variable RowsUnite, which groups the rows by a specified number of points (for example, ten).

Hidden orders are not sent to the broker's server, but are stored directly in the utility's memory, and are triggered as direct deals at the touch of the declared price. Therefore, when using HideOrders modes, especially ExitType, a stable connection with the broker server is required.

Due to the specifics of the displayed data, the utility can not work as a trial version, and can not be tested in the strategy tester.

Input variables

A description of the input variables is attached on the \"Comments\" tab in post 21 of 26.11.2021.

", "url": "https://www.mql5.com/en/market/product/36473", "small_icon": "https://c.mql5.com/31/313/smart-dom-driver-logo-60x60-2133.png", "middle_icon": "https://c.mql5.com/31/439/smart-dom-driver-logo-140x140-2914.png", "icon": "https://c.mql5.com/31/313/smart-dom-driver-logo-200x200-2219.png", "rating": 0, "price": 30, "published": 1551739468, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 36477, "title": "KT Asian Breakout MT5", "description": "

KT Asian Breakout carefully analyzes the range-bound market during the Asian session and then fires a long or short trade after doing some preassessment based on its inbuilt technical analysis module.

The executed orders are closed within a day before the completion of the next day session. The inbuilt technical analysis module checks for the session range and compares it with the last 20 days price movement. If it finds any erratic price movement within the session, the orders are not executed.

KT Asian Breakout is designed to use on only 15 Minute Time Frame. Using it on another time frame can show unstable behavior.
Based on your input settings, it may or may not execute trades daily\"

Features

Combine a traditional Asian breakout strategy with a lot of features and advancements.
Provides the ability to choose stop-loss and take profit using the session range.
Draw session box on the chart which significantly helps to understand the trading strategy.
Boost EA performance using the inbuilt filters like MMI, Vortex, Volatility, Market Regime and more.
Three stages partial closing to capture the available profit on table at the right moment.

Input Parameters

----- Inputs that affects the trading strategy -----
GMT Offset: Calculate correct GMT using the server time.
Draw Session Box: Draw the Asian session box on the chart.
Session Box Color: Choose the session box color.
----- Configure Trade Settings -----
Lot Size Method: Fixed Lot Size|Auto Lot Size
Risk Per Trade: Risk percentage per trade.
----- Choose Exit Settings -----
Use Stop loss: true|false
Stop loss Method: pips|volatility|session high/low
Use Take Profit: true|false
Take Profit Method: pips|volatility|session range
Use SL Trailing: true|false
SL Trailing Method: pips|volatility
----- Set the Filters -----
Trend Filter: true|false
Volatility Filter: true|false
Vortex Filter: true|false
MMI Filter: true|false
----- Configure the Day Filter -----
Trade on Monday
Trade on Tuesday
Trade on Wednesday
Trade on Thursday
Trade on Friday
----- Miscellaneous Settings -----
Max Loss Protection: true|false
Logging: true|false (EA logs all its operation in the journal tab)

", "url": "https://www.mql5.com/en/market/product/36477", "small_icon": "https://c.mql5.com/31/313/kt-asian-breakout-mt5-logo-60x60-4812.png", "middle_icon": "https://c.mql5.com/31/440/kt-asian-breakout-mt5-logo-140x140-2842.png", "icon": "https://c.mql5.com/31/313/kt-asian-breakout-mt5-logo-200x200-1374.png", "rating": 0, "price": 140, "published": 1551818980, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36500, "title": "Profit Ladder Mt5 EA", "description": "

This is not an aggressive, high yielding EA but targets between 100% - 200% annually so as to keep drawdown as low as possible. However, to increase target, you may increase MM until you get desired result.

\r\n

EA default setting is recommended for H1 timeframe of GBPUSD but can be optimized for other pairs and timeframes as well.

PARAMETERS:

1. UseFixedLot: By default, this is set to false, meaning you are using growing lots based on available capital and MM setting. If you prefer to use fixed lot size, set this to true.

2. FixedLotsize: Ignore this if you're not using fixed lot size. If using fixed lot, ensure the value you set here is commensurate with your available capital.

3. MM_Percent: Money Management - Default value is set to 5. Higher value means higher stake.

4. MM_Denominator: Default value is 1,000. Your Account Balance divided by MM_denominator multiply by MM_Percent determines your lot size per trade.

5. MinLot: This is used to set your preferred minimum lot size.

6. MaxLot: This is used to set your preferred maximum lot size.

\r\n

7. UseInbuiltExit: This can be set to true or false

7. Stop Loss: Pip value is used. EA will recognize your broker's digits automatically.

8. Take Profit: Pip value is used. EA will recognize your broker's digits automatically.

9. MaxSpread: Maximum Allowed Spread. Used for spread protection.

10. Parameter1 - Default value is recommended

11. Parameter2 - Default value is recommended

12. Parameter3 - Default value is recommended

13. Parameter4 - Default value is recommended

14. Parameter5 - Default value is recommended

15. Parameter6: 0 to 23 can be used.

16. Parameter7: 0 to 59 can be used.

17. Parameter8: 0 to 23 can be used.

18. Parameter9: 0 to 59 can be used.

19. Magic Number: Can be combination of digits from 0 to 9.

EA will recognize currency pair prefix, suffix, as well as broker's digits. Hence it can work well with any MT5 broker and can manage both small and large capital.

It is recommended to host your account and the EA on MQL5.com VPS, for better result.

See screenshots for EA testing results. To confirm the backtest result, ensure you have enough data history downloaded.

", "url": "https://www.mql5.com/en/market/product/36500", "small_icon": "https://c.mql5.com/31/313/profit-ladder-mt5-ea-logo-60x60-1168.png", "middle_icon": "https://c.mql5.com/31/440/profit-ladder-mt5-ea-logo-140x140-4867.png", "icon": "https://c.mql5.com/31/313/profit-ladder-mt5-ea-logo-200x200-4210.png", "rating": 0, "price": 100, "published": 1551808078, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36530, "title": "Survivor Advanced", "url": "https://www.mql5.com/en/market/product/36530", "small_icon": "https://c.mql5.com/31/313/survivor-advanced-logo-60x60-7607.png", "middle_icon": "https://c.mql5.com/31/446/survivor-advanced-logo-140x140-2334.png", "icon": "https://c.mql5.com/31/313/survivor-advanced-logo-200x200-1038.png", "rating": 4, "price": 50, "published": 1552225113, "popularity": 0, "category": "Expert", "votes": 3 }, { "id": 36557, "title": "SuperIndices MT5", "description": "

This cluster indicator is MT5 version of SuperIndices for MT4. It allows for processing mixed clusters, where symbols from various markets can be included. For example, it can handle Forex, indices, CFDs, spot at the same time. Number of visible lines increased to 16. An interactive ruler can be enabled to measure signals' strength on the history.

\r\n\r\n

The indicator creates a set of embedded cluster indicators (CCFpExtraIndices) with carefully selected periods and combines their results using smart weighting and normalization algorithms. Up to 15 instruments can be specified.

\r\n\r\n

The signals are: the higher ticker/currency the stronger signal to buy it, the lower ticker/currency the stronger signal to sell it. Most reliable plan is to buy uppers and sell lowers.

\r\n\r\n

The lines of a ticker and/or a currency, which correspond to current work symbol, are shown thick. For example, on a DAX30 chart most heavy line is DAX30, a little bit less heavy - EUR, as it's quote currency for DAX30. Other indices, CFD, commodities with the same quote currency are shown as thin solid lines (in our case, such as STOXX50, CAC40). Other indices, CFD, commodities (with different quote currencies) are shown as dashed lines. All the rest currencies are dotted lines.

\r\n\r\n

At the right hand side of the lines there are labels with ticker/currency names and signal strengths, displayed like +-N(+-D), where N - a difference between the ticker and its quote currency, D - averaged change of the strength in the last period (24 hours or 12 bars, whatever is larger). The larger is a positive value, the more bright blue color is used. The larger is a negative value - the brigher red is used. The best opportunity is when both the signal and its change have the same direction. The strength of a half of the scale or more increases the chances.

\r\n\r\n

Click consecutively 2 labels to the right of the lines to enable the ruler (vertical line). Move mouse cursor over bars in history to view signal between selected labels in the past (highlighted by the ruler). Click the labels once again to hide the ruler.

\r\n

\r\n\r\n

The recommended timeframes H1 - D1. First, the indicator produces more reliable signals on higher timeframes. Second, it'll consume much more resources on lower timeframes.

\r\n\r\n

\r\n

It's recommended to add symbols to a cluster one by one - this streamlines data download and makes it easier to locate potential problems.

\r\n\r\n

Parameters:

\r\n\r\n

Instruments - comma separated list of instruments, maximum 15; the instruments may not have a common currency - the indicator will attempt to find conversion rule via default currency (DefaultBase, see below) by analyzing base currency (for Forex symbols) and quote currency; the default set of instruments is empty, which means the only one work symbol of current chart - this mode is rudimentary and only needed to pass automatic validation; it's recommended to start from 5 Forex majors EURUSD,GBPUSD,USDJPY,AUDUSD for which corresponding indices NASDAQ, DAX30, FTSE, NIK225, ASX200 are usually provided (but their names vary from brokers and not present on MetaQuotes-Demo at all); edit as appropriate;
MA_Method - moving average method, the default is exponential;
Price - moving average applied price type, the default is open price; it's recommended to change it to typical or weighted;
All_Bars - number of bars to calculate on, the default - 20; 0 means all available bars (not recommended);
BarByBar - false means re-calculating 0-th bar on every tick, true (default) means calculating bar only once;
DefaultBase - common currency to use, USD by default;
Prefix, Suffix - optional prefix and suffix, used in symbol names (if used by your broker); by default - empty;
Indicator_Prefix - common prefix for all objects of the indicator, by default \"S2_\"; it should be unique for every instance of the indicator applied on the same chart.

", "url": "https://www.mql5.com/en/market/product/36557", "small_icon": "https://c.mql5.com/31/314/superindices-mt5-logo-60x60-3467.png", "middle_icon": "https://c.mql5.com/31/440/superindices-mt5-logo-140x140-1366.png", "icon": "https://c.mql5.com/31/314/superindices-mt5-logo-200x200-5256.png", "rating": 5, "price": 99, "published": 1552136072, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 36558, "title": "Binary Bollinger", "url": "https://www.mql5.com/en/market/product/36558", "small_icon": "https://c.mql5.com/31/314/binary-bollinger-logo-60x60-8608.png", "middle_icon": "https://c.mql5.com/31/445/binary-bollinger-logo-140x140-2338.png", "icon": "https://c.mql5.com/31/314/binary-bollinger-logo-200x200-7951.png", "rating": 0, "price": 0, "published": 1558855975, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36560, "title": "Binary 2SMA", "url": "https://www.mql5.com/en/market/product/36560", "small_icon": "https://c.mql5.com/31/314/binary-2sma-logo-60x60-1509.png", "middle_icon": "https://c.mql5.com/31/440/binary-2sma-logo-140x140-8671.png", "icon": "https://c.mql5.com/31/314/binary-2sma-logo-200x200-8254.png", "rating": 0, "price": 0, "published": 1553198603, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36567, "title": "Binary MACD", "url": "https://www.mql5.com/en/market/product/36567", "small_icon": "https://c.mql5.com/31/314/binary-macd-logo-60x60-6911.png", "middle_icon": "https://c.mql5.com/31/439/binary-macd-logo-140x140-1723.png", "icon": "https://c.mql5.com/31/314/binary-macd-logo-200x200-1103.png", "rating": 0, "price": 0, "published": 1555508127, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36571, "title": "TradeOnNews", "description": "

For those who trade on the news...

At the appointed time, the EA places stop orders BuyStop and SellStop. The distance of placing orders from the current market prices is customizable. If after a specified time (timer) no orders are triggered, the EA will modify them. Move them back to the right distance from the market. When one order is triggered, the other is deleted. If no order is triggered within the specified period of time, both orders are deleted. For an open position it is possible to enable trailing.

Characteristic

Lots-lot Size for placing pending orders.
The time of the news - time to place orders.
Timer (sec) - modifies orders After a specified number of seconds.
Distance (pip) - places orders After a specified number of points.
Distance StopLoss (pip) - through the specified number of points puts stop Loss.
Distance TakeProfit (pip) - sets the take Profit after a specified number of points.
Orders delete (min) - deletes orders After a specified number of minutes if they have not been triggered.
ID-ID Of the opened orders. If ID=0 ID is generated automatically.
Use Trailing - Use trailing stop. It takes the values \"Don't Trailing\" - do not use trailing,\" Profit Trailing \" - transfer stop loss immediately to breakeven,\" Loss Trailing \" simple trailing.

", "url": "https://www.mql5.com/en/market/product/36571", "small_icon": "https://c.mql5.com/31/314/tradeonnews-logo-60x60-4499.png", "middle_icon": "https://c.mql5.com/31/440/tradeonnews-logo-140x140-4448.png", "icon": "https://c.mql5.com/31/314/tradeonnews-logo-200x200-9675.png", "rating": 0, "price": 30, "published": 1552045332, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36592, "title": "Divergence Scanner Macd Rsi 30 Pairs 8 Tf MT5", "description": "

This indicator is designed to detect the best divergences between \r\nprice/MACD and price/RSI. MACD and RSI produce by far the best \r\ndivergence signals therefore this indicator focus on those two \r\ndivergences.

\r\n

This indicator scans for you up to 15 instruments and up to 21 timeframes for bullish and bearish divergences.

\r\n

You need to add the indicator only to one single chart! The indicator will then automatically scan all configured instruments and timeframes.

\r\n

Important Information

The indicator checks both divergences at the same time (MACD / RSI) unless you deactivate one of the divergence checks.

\r\n\r\n

\r\n

Parameters

\r\n

alertsLong: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Bullish Divergence\" signals for long entries
alertsShort: True = Yes, False = No - if true, then the indicator alerts occurrences of \"Bearish Divergence\" signals for short entries
alertsViaMT4: True = Yes, False = No - if true, then the indicator gives alerts via MetaTrader 4 popup
alertsViaEmail: True = Yes, False = No - if true, then the indicator gives alerts via email
alertsViaPush: True = Yes, False = No - if true, then the indicator gives alerts direct to your mobile phone
alertsM1: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M1
alertsM2: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M2
alertsM3: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M3
alertsM4: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M4
alertsM5: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M5
alertsM6: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M6
alertsM10: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M10
alertsM12: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M12
alertsM15: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M15
alertsM20: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M20
alertsM30: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on M30
alertsH1: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H1
alertsH2: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H1
alertsH3: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H1
alertsH4: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H4
alertsH6: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H6
alertsH8: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H8
alertsH12: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on H12
alertsD1: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on D1
alertsW1: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on W1
alertsMN1: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" signals on MN1
alertMACD: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" between price an the MACD indicator
alertRSI: True = Yes, False = No - if true, then the indicator searches for \"Divergence\" between price an the RSI indicator
macd_fastEMA: the period setting of the fast EMA for the MACD
macd_slowEMA: the period setting of the slow EMA for the MACD
macd_signalSMA: the period setting of the signal SMA for the MACD
period: the period setting of the RSI
templateName: - if you press a button on the chart (which\r\n contains the name of an instrument), then the appropriate chart will \r\nopen and a template with the specified name will be attached
checkEveryXSeconds - every X seconds, the indicator checks the next instrument/timeframe for the occurrence of a \"Divergence\" signal
i1-i15 - define up to 15instruments, which will be monitored/checked for the occurrence of a \"Divergence\" signal

", "url": "https://www.mql5.com/en/market/product/36592", "small_icon": "https://c.mql5.com/31/314/divergence-scanner-macd-rsi-30-pairs-8-tf-mt5-logo-60x60-9195.png", "middle_icon": "https://c.mql5.com/31/446/divergence-scanner-macd-rsi-30-pairs-8-tf-mt5-logo-140x140-9284.png", "icon": "https://c.mql5.com/31/314/divergence-scanner-macd-rsi-30-pairs-8-tf-mt5-logo-200x200-7802.png", "rating": 0, "price": 79, "published": 1552053517, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36602, "title": "IRB Scalper Original", "description": "

IRB Scalper Original

\r\n

The Original version of IRB Scalper Pro (V3.0)\r\n

\r\n

The strategy:

\r\n\r\n

EA strategy is inspired from a profitable strategy\r\nof Mr Rob Hoffman (One of the best traders in the world with multiple prizes on\r\nmanual trading) .

\r\n\r\n

1.Entry:

\r\n\r\n

The EA search for IRB bars (Inventory\r\nretracement bar), and place sell pending order or buy pending order according\r\nto the trend confirmed by the calculation of a 20 EMA slope degree.

\r\n\r\n

We believe that most of IRB Bar are caused by\r\nhuge institutions (Hedge funds …), so the idea is to take benefits from their\r\nvery profitable robots.

\r\n\r\n

2.Exit

\r\n\r\n

1. By very tight trailing stop to avoid loss of profit in case of reversal.

\r\n\r\n

2. By time, the EA close all unprofitable position within X hours.

\r\n\r\n

3. (Optional) Emergency Stop Loss triggered by price cross of Slow MA in\r\nthe opposite direction.

\r\n\r\n

4. I avoid the use of a fixed SL, because generally it’s hits by the noise, but\r\nit’s included in parameters if you insist :)

\r\n\r\n

3.Number of pending Order:

\r\n\r\n

The EA place a maximum of x pending order, and\r\nit double the lot only of the first position is profitable.

\r\n\r\n

4.Symbol and time frame.

\r\n\r\n

ONLY EURUSD with M5 Period.

\r\n\r\n

5.GENERAL Parameters.

\r\n\r\n

Lot Size : Fixed Lot size used for trading (without money management).

\r\n\r\n

Money management: (True,False) Enabling Money management ( AutoLot).

\r\n\r\n

Percent of risk : (From 0 to 100) Percent of free margin to trade.

\r\n\r\n

Minimum lot size : Minimum lot size (with money management).

\r\n\r\n

Magic Sell Number: Magic number for sell positions.

\r\n\r\n

Magic Buy Number : Magic number for buy positions.

\r\n

Maximum number of pending order : Maximum number of pending order in same time.

\r\n\r\n

Number signal bars buffer : Number of bar to be checked for IRB (20 By default).

\r\n\r\n

IRB Deviation : IRB Parameter (10 By default).

\r\n

Slope of the trend: Angle of the trend (From 0 to 20)

\r\n

Number of angle Bars : Number of bars for calculate the slope of the trend (5 By default)

\r\n\r\n

StopLoss : Stoploss in points.

\r\n\r\n

Take Profit : Take profit in points.

\r\n\r\n

Trailing STOP : Trailing stop in points.

\r\n\r\n

Trailing Start : Trailing stop start in points.

\r\n\r\n

Trailing Step : Trailing stop Step in points.

\r\n\r\n

Emergency Stop Loss : (True/False) Emergency Stop Loss triggered by price cross of Slow MA.

\r\n\r\n

Closing Non Profit Position by Maximum Hours: (In hours) Time before closing all non profit positions.

\r\n

", "url": "https://www.mql5.com/en/market/product/36602", "small_icon": "https://c.mql5.com/31/314/irb-scalper-original-logo-60x60-6726.png", "middle_icon": "https://c.mql5.com/31/440/irb-scalper-original-logo-140x140-7216.png", "icon": "https://c.mql5.com/31/314/irb-scalper-original-logo-200x200-2088.png", "rating": 0, "price": 39, "published": 1552079900, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36633, "title": "Alligator Agressive 500", "description": "

FOREX Alligator Robot

EA ALLIGATOR was developed to achieve specific and highly accurate goals, which is key to guaranteeing significant returns in the world Forex market, works only in the EURUSD currency pair, and only in the time frame 15m It runs in the year 2016 onwards only. Be a predator in the most hostile market in the world.

IMPORTANT - - Outside of this scenario it breaks your account.

\r\n

HOW IT WORKS

Our team has taken care to optimize your Forex market experience to the maximum, creating a pattern of income according to your profile and initial investment value, you choose how much you want to invest and we deliver a perfect Alligator Robot for you. We separate the Robot Alligator into 3 types of Investor Profiles: CONSERVATIVE, MODERATE and AGGRESSIVE Each profile will reach an average monthly income accompanied by a Draw Down corresponding to the risk, the profit goes hand in hand with the risk, remember that.

STRATEGY OF INDICATORS

The strategy is based on the indicators BOLLINGER BANDS and ALLIGATOR, opens 1 (one) operation at a time, works on standard accounts with leverage of 1:500 and time frame 15m.

\r\n

IMPORTANT- Never operate the Alligator Robot outside the habitat in which it has been trained and tested.

PARAMETERS

Rôbo Alligator releases only the lots to be changed.

REQUIREMENTS

Only in the Brokerage ICMARKETS.
Initial deposit as directed (Very important to respect the opening balance)
MetaTrader5 account.
Standard Type.
Currency USD.
Leverage 1: 500
Time Frame 15m
It runs in the year 2016 onwards only.

MQL5

All our Robots have links in mql5 with history, follow below link:

https://www.mql5.com/uk/signals/538884

IMPORTANT - Never operate the Alligator Robot outside the habitat in which it has been trained and tested.

", "url": "https://www.mql5.com/en/market/product/36633", "small_icon": "https://c.mql5.com/31/315/alligator-agressive-500-logo-60x60-7596.png", "middle_icon": "https://c.mql5.com/31/441/alligator-agressive-500-logo-140x140-9716.png", "icon": "https://c.mql5.com/31/315/alligator-agressive-500-logo-200x200-2027.png", "rating": 0, "price": 30, "published": 1552177956, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36672, "title": "Bar by Bar MT5", "description": "

The scalper Expert Advisor monitors and makes deals when the number of bull / bear bars in a row reaches a predetermined value. It works on opening a new bar (by default M5), if the signal continues, an additional transaction is opened. The adviser has several parameters that respond directly to the direction of trade:

TIMEFRAME - working timeframe;
MIN_BAR_SIZE - minimum bar size, set as% of ATR;
DIRECTION_CONTINUED - the number of bull / bear bars in a row to open a transaction in the direction of travel;
DIRECTION_REVERSAL - the number of bull / bear bars in a row to open a trade opposite to the direction of movement;
PERIOD_ATR - period of the ATR indicator, for calculating the minimum bar size;
MAX_ORDERS - the maximum number of orders in one direction;
IGNORE_SIGNAL - ignore the signal to open a trade if there are already open positions opposite to the signal until the number of opposite trades reaches the value MAX_ORDERS;

The adviser has a time job function:

START_HOUR, START_MINUTE - the hour and minutes allowed to open trades;
STOP_HOUR, STOP_MINUTES - hour and minutes for the end of trading;
CLOSE_ZEROLEVEL - close all orders on breakeven if the allowed time for trading is over;

Management:

USE_BALANCE_PCT - the percentage of funds from the balance that the adviser can use is set for each symbol separately;
FIX_START_LOT - fixed starting lot for each N amount from the balance (FROM_BALANCE);
FROM_BALANCE - N amount of balance to calculate the starting lot (FIX_START_LOT);

Closing deals:

STOPLOSS_IN_PIPS - if TRUE, then STOPLOSS is set in pips, otherwise in% of balance;
VIRTUAL_STOPLOSS - stop loss;
STOP_TRADING - stop trading when a loss is received;
VIRTUAL_TAKEPROFIT - take profit in pips, initially calculated from the opening price of the first order;
START_TP_ZEROLEVEL - the number of orders when the take profit starts to be calculated from the breakeven level;
CLOSE_AT_ZEROLEVEL - the number of orders when all trades will be closed for a total breakeven;
USE_TRAILINGSTOP - allow to use trailing stop;
TRAILING_STOP, TRAILING_STEP - start and trailing stop step;

", "url": "https://www.mql5.com/en/market/product/36672", "small_icon": "https://c.mql5.com/31/721/bar-by-bar-mt5-logo-60x60-1256.png", "middle_icon": "https://c.mql5.com/31/721/bar-by-bar-mt5-logo-140x140-6982.png", "icon": "https://c.mql5.com/31/721/bar-by-bar-mt5-logo-200x200-7109.png", "rating": 0, "price": 35, "published": 1552335270, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36689, "title": "AIS Dynamic Geometric Filter MT5", "description": "

This indicator is a sequential hybrid filter based on a combination of median and moving average properties.

Using the median allows filtering out abnormal outliers and random impulses in the values of the price series. At the same time, the median filter does not act on the trend in price movement, leaving it unchanged.

Since the median filter is non-linear, averaging using a simple moving average is used to smooth its values. This approach allows us to more accurately identify not only the trend, but also the periodic component in the price movement. In addition, it increases the indicator's sensitivity to price changes and reduces the delay between the price series and the indicator readings. Due to this, the indicator can fairly accurately warn about the beginning of a new trend, and about the end of the old trend.

You can adjust the depth of the filter and its sensitivity using the FL parameter. Its allowable value is from 0 to 63. At the same time, 2 * FL + 1 bars are used to calculate the indicator values. Thus, the larger the FL value, the stronger the trend of the price chart will be displayed by the indicator.

", "url": "https://www.mql5.com/en/market/product/36689", "small_icon": "https://c.mql5.com/31/315/ais-dynamic-geometric-filter-mt5-logo-60x60-7026.png", "middle_icon": "https://c.mql5.com/31/438/ais-dynamic-geometric-filter-mt5-logo-140x140-9777.png", "icon": "https://c.mql5.com/31/315/ais-dynamic-geometric-filter-mt5-logo-200x200-7428.png", "rating": 0, "price": 30, "published": 1552319357, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36728, "title": "Mac Undead", "description": "

EA Undead is fully automated bot to generate a stable profit from the volatile FOREX market.

This EA will never depend on any indicator.

How this EA works?

At the very first it will open a Buy order and Sell Order at same time. And by default take profit will be 15 Pips for all orders.
Once take profit reaches it will Re-Open that order.
If the market goes against any order than it will add more positions, by default 50 Pips away from last open trade.
To minimize the draw-down and loss and to be stable, there will be positions open on both direction BUY(s) and SELL(s)

USAGE

To minimize the risk you can use the EA on a cent account. Time-frame doesn't matter.
Use on a low spread broker that allows hedge.
Better to use on 20 currency pairs at same time to generate stable profit.
Use this EA only on Currency Pairs, do not use instruments such as stocks and bonds.
Withdraw the profit regularly.

And do not forget, always invest only the amount you are prepared to lose.
You miss 100% of the shots you don't take.

Default Inputs

Magic Number, kind of... = 4505 - (Should be unique on each additional chart)
VolumeSize = 0.10 - (Fixed lot size)
TakeProfitPips = 15 - (Fixed Take profit level for each trade. In Pip)
PipsAway = 50 - (Gap distance from each trade. In Pip)

", "url": "https://www.mql5.com/en/market/product/36728", "small_icon": "https://c.mql5.com/31/315/mac-undead-logo-60x60-6196.png", "middle_icon": "https://c.mql5.com/31/438/mac-undead-logo-140x140-9261.png", "icon": "https://c.mql5.com/31/315/mac-undead-logo-200x200-1854.png", "rating": 0, "price": 69, "published": 1552472595, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36757, "title": "Dark Trader MT5", "description": "

The Expert Advisor works on sharp price movements; it can apply open position locking and pyramiding. Virtual stops are used (take profit, trailing stop), to limit losses, order locking and stop loss are used in% of balance. At the same time, several dozens of orders can be opened and the advisor will need free funds to exit the locks and close all positions for total profit, this should be taken into account when choosing the number of instruments for trading.

The work of the adviser does not depend on the timeframe on which it is installed, only the price and time are used in the calculations (but for testing and optimization it is still better to use M1). To work on a real account, currency pairs with a minimum spread and high volatility are recommended: EURUSD, GBPUSD, AUDUSD, USDCAD, USDCHF, USDJPY, NZDUSD. The Expert Advisor was developed for trading currency pairs and was not tested on metals, contracts, promotions, etc. Before installing on a real account, test the Expert Advisor on real ticks for at least the last 3 months. The recommended minimum deposit is $ 500 per starting 0.01 lot.

The initial trading lot is calculated as LOT = ACCOUNT_BALANCE / FROM_BALANCE * FIX_START_LOT (Balance / Balance amount for the calculation of the starting lot * Fixed lot)

If the price does not go in our direction, then the order is locked at a given distance FIX_LOCK_DISTANCE

The next order lot is calculated in such a way that through EXIT_LOCK_DISTANCE points, the profit on the order is equal to the drawdown of all positions that are under the lock, and then closing all positions from the breakeven level by take profit or trailing stop. LOT = DRAWDOWN / EXIT_LOCK_DISTANCE * TICKVALUE (Current drawdown / number of points for exiting locks * point value)

Options:

COMMISSION_CONTROL - To check the commission, the adviser will immediately open a trade with the minimum lot per symbol, this will happen only once;
COMMISSION_IN_PIPS - set the amount of commission for a transaction manually, set in points;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
TIMER_SECONDS - timer in seconds to change the levels of opening orders;
DYNAMIC_DISTANCE - use dynamic distance from the current price to open trades, calculated as spread + commission * DIST_COEFFICIENT;
DIST_COEFFICIENT - multiplication factor of the spread for the indent from the current price;
FIX_PRICE_DISTANCE - fixed value of the indent from the current price, if DYNAMIC_DISTANCE = false;
OPEN_ORDER_DELAY - the minimum interval between the opening of new orders in seconds;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CLOSE_ORDER_DELAY - the minimum duration of the transaction in seconds;
DYNAMIC_TAKEPROFIT - use dynamic take profit, calculated as spread + commission * TP_COEFFICIENT;
TP_COEFFICIENT - spread multiplication factor for take profit;
FIX_TAKEPROFIT - fixed take profit in points;
USE_TRAILINGSTOP - allow to use trailing stop;
TRAILING_STOP - virtual trailing stop size in points, to which the fixed profit will be changed;
TRAILING_STEP - virtual trailing stop step in points that remains for the price move after the stop loss modification;
STOPLOSS_PERCENT - stop loss in% of balance;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
USE_LOCK_ORDERS - use lock;
START_LOCK_ORDERS - the number of orders to start locking;
FIX_LOCK_DISTANCE - the distance at which transactions will be locked;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
USE_PYRAMIDING - use pyramiding;
PYRAMID_TRADES - the number of orders in the pyramiding;
PYRAMID_CLOSE - the number of points before closing the order pyramid;
BREAKEVEN_PROFIT - minimum profit of closing the order pyramid;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FIX_START_LOT - fixed starting lot for each N amount from the balance;
FROM_BALANCE - N balance amount for the calculation of the starting lot;
EXIT_DD_DISTANCE - the distance over which the profit on the transaction should cover the open positions;
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MAGIC_NUMBER - magic number;
ORDERS_COMMENT - order comment;
MAX_SLIPPAGE - maximum slippage;
MAX_SPREAD - maximum spread;

", "url": "https://www.mql5.com/en/market/product/36757", "small_icon": "https://c.mql5.com/31/721/dark-trader-mt5-logo-60x60-4933.png", "middle_icon": "https://c.mql5.com/31/721/dark-trader-mt5-logo-140x140-2705.png", "icon": "https://c.mql5.com/31/721/dark-trader-mt5-logo-200x200-6345.png", "rating": 0, "price": 35, "published": 1553043506, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36764, "title": "AIS Dual Lanczos Filter MT5", "description": "

This indicator is a combination of two modified Lanczos filters.

The first filter serves to extrapolate the price. Based on past values, he predicts a possible price movement within the current bar. That is, it shows what the price would be if the past trends remained unchanged.

The second filter for smoothing and averaging prices within the window, determined by the level of the filter. Thanks to the selection of weights, this filter is most actively responding to the periodic component that is present in the price movement.

The indicator can be adjusted using the EF and IF parameters. By selecting the values of EF and IF you can achieve signals about the beginning of trend price movements.

EF - window size of the exponential filter. Valid value is EF = 0 ... 255. And the number of bars processed during the calculation is 2 * EF + 1. The larger this parameter, the stronger the impact of the past values of the price series. The result is plotted in solid lines.
IF - adjusts the size of the averaging window. The value of IF = 0 ... 255. The number of bars to be calculated is 2 * IF + 1. The greater the value of IF, the longer periods in the movement of prices are detected using this filter. The result is displayed on the graph by dashed lines.

", "url": "https://www.mql5.com/en/market/product/36764", "small_icon": "https://c.mql5.com/31/316/ais-dual-lanczos-filter-mt5-logo-60x60-1521.png", "middle_icon": "https://c.mql5.com/31/446/ais-dual-lanczos-filter-mt5-logo-140x140-2895.png", "icon": "https://c.mql5.com/31/316/ais-dual-lanczos-filter-mt5-logo-200x200-2970.png", "rating": 0, "price": 30, "published": 1552567359, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36779, "title": "Night Scalper EA MT5", "description": "

The Night Scalper EA is a fully automated Expert Advisor that trades at night and relies on price reversion. The EA trades using market orders and uses time averaging to improve performance. This EA works best on EURUSD using the M5 timeframe, but will also work on AUDUSD, GBPUSD, NZDUSD, USDCAD, USDCHF and likely many more. A VPS is advisable when trading this system and a low spread and commission based broker is best. Check the comments for back test results and optimized settings.

View More Products - https://www.mql5.com/en/users/robots4forex/seller#!category=1
Monitoring Signals - https://www.mql5.com/en/signals/author/robots4forex?orderby=gain

Features

Fully automated
High win rate aggressive scalping
Risk money management
Always a stop loss in place
This system is NFA/FIFO compliant
All you need is a VPS

Input Settings

Order Settings

MagicOrderNumber - Unique number for the EA to identify its trades. Any integer.
Lots - Number of fixed lots per trade if money management is off. Values from 0.01 to 50.0.
Slippage - Slippage in pips. Values from 1 to 10.
MoneyManagement - If turned on trade lot sizes are calculated on account risk, true/false.
MoneyManagementRisk - Risk per trade if money management is on. Values from 0.01 to 0.1.
AllowNewTrades - Turn this of to disable new trades, true/false.
AccountProfitLock - If money management is on the EA will stop trading if the account balance drops to this fraction of the maximum account balance (0.5 = 50% of account balance). Values from 0.0 to 1.0.
PositionComment- Allows you to set the position comment.

Entry Settings

TimeFrame - Timeframe drop-down selection to lock EA to a timeframe so that selection of the chart timeframe doesn't affect the EA. When testing ensure the tester timeframe is set to the same value.
CloseTimeFrame - Timeframe to use when looking to close positions.
MaxSpread - Maximum spread in pips that the EA will trade. Values from 1.0 to 10.0.
TakeProfit - The take profit (Setting to 0 disables). Values from 0 to 100 depending on the pair being traded.
StopLoss - The fixed stop loss visible to the broker - Values 25 to 200 depending on the pair being traded.
GMTOffsetHours - Offset in hours for your broker's time zone - Values -12 to 12.
StartCandleHour - Start bar hour - Values 0 to 24.
EndCandleHour - End bar hour - Values 0 to 24.
RSIPeriod - The RSI period used as entry signal - Values 1 to 40.
RSIThreshold - The RSI threshold used as entry signal (Setting to 0 disables) - Values 0 to 40.
RSIThresholdBuy - The RSI threshold used as entry buy signal (Setting to 0 disables) - Values 0 to 40.
RSIThresholdSell - The RSI threshold used as entry sell signal (Setting to 0 disables) - Values 0 to 40.
RSIClosePeriod - The RSI period used as close signal - Values 1 to 40.
RSICloseThreshold - The RSI threshold used as close signal (Setting to 0 disables) - Values 0 to 40.
RSICloseThreshold2 - The RSI upper threshold used as close signal (Setting to 0 disables) - Values 0 to 40.
TakeProfitReductionMins - The reduction of TP in minutes - Values 0 to 1000.
TakeProfitMin - The minimum TP for reduced TP over time - Values 0 to 10.
ClosePositionsFriday - If enabled open positions are closed on Friday at the set time, true/false.
ClosePositionsFridayLastHour - The hour to close positions on Friday - Values 0 to 24.
ClosePositionsFridayMinutes- The minute to close positions on Friday - Values 0 to 59.

Optimization & Defaults

Default input values are for EURUSD M15. If optimizing, optimization of RSIPeriod, RSIThreshold, RSIClosePeriod and StopLoss are needed to find the best results.

", "url": "https://www.mql5.com/en/market/product/36779", "small_icon": "https://c.mql5.com/31/316/night-scalper-ea-mt5-logo-60x60-8684.png", "middle_icon": "https://c.mql5.com/31/440/night-scalper-ea-mt5-logo-140x140-6204.png", "icon": "https://c.mql5.com/31/316/night-scalper-ea-mt5-logo-200x200-4725.png", "rating": 0, "price": 30, "published": 1552602086, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36781, "title": "Brazil Options Greeks", "description": "

This indicator works in Brazil market, it should be used on options symbols. the indicator create 8 buffers, Delta, Gamma, Vega, Rho, Theta, Time(working days), Implied Volatility, R (interest rate), and can be used to view greeks over time. It shouldn't be used to trade, since it's cpu intensive, it's just a historic viewer, you can see what happened with greeks and teach friends :)

\r\n

", "url": "https://www.mql5.com/en/market/product/36781", "small_icon": "https://c.mql5.com/31/316/brazil-options-greeks-logo-60x60-6543.png", "middle_icon": "https://c.mql5.com/31/440/brazil-options-greeks-logo-140x140-3805.png", "icon": "https://c.mql5.com/31/316/brazil-options-greeks-logo-200x200-8845.png", "rating": 0, "price": 0, "published": 1552602874, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36789, "title": "TimePrice ratio", "description": "

A chart is\r\nmade by price and time but many traders consider only price.For each swing TIME-PRICE\r\nRATIO indicator shows in real time ratio\r\nbetween price/time and time/price.

\r\n\r\n

Moreover in\r\nthe past you can read for each swing :number of pips;number of bars;ratio P/T\r\nand ratioT/P.

\r\n\r\n

Why it is\r\nusefull? because when P/T or T/P is a fibonacci ratio,the probabilities\r\nincrease for inversion near support/resistance lines.During swing formation an\r\naudible alarm and a warning window advise you that a fibonacci ratio is occured.

\r\n\r\n

You can\r\nchoose number of swings shown with different colours (I prefer two,at most\r\nthree) using MAGIC NUMBER and playng with input invert_at_pips

\r\n\r\n

TIPS:

\r\n\r\n

TF 1 m invert_at_pips\r\n50 or 100

\r\n\r\n

TF 5 m invert_at_pips\r\n100 or 200

\r\n\r\n

TF 15 m invert_at_pips\r\n100 or 200

\r\n\r\n

TF 1H invert_at_pips 300 or 400

\r\n\r\n

TF 4H and\r\n1D invert_at_pips over 1000

\r\n\r\n

distancefromhigh\r\nand distancefromlow allow you to put correct text under/above bars.For example\r\nTF1 minute I use distancefromhigh1 5, distancefromlow1 5, distancefromhigh 2 10\r\nand distancefromlow 2 10.

\r\n\r\n

For TF1 H I\r\nuse distancefromhigh 1 15, distancefromlow 1 15, distancefromhigh 2 40 and distancefromlow\r\n2 40.

\r\n\r\n

Indicator input parameter:

\r\n\r\n

magic-in\r\norder to allow drawing multiple swings with different parameters

\r\n\r\n

disablealert-set\r\ntrue/false for alarm

\r\n\r\n

whatcorner-choose\r\nin what corner you want read ratio value

\r\n\r\n

barsdepth-how\r\nmany bars in the past for showing swings

\r\n\r\n

invert_at_pips\r\n- to change swing amplitude

\r\n\r\n

distancefromhigh\r\n1-set how many points first text is above high bar

\r\n\r\n

distancefromlow\r\n1-set how many points first text is under low bar

\r\n\r\n

distancefromhigh\r\n2-set how many points second text is above high bar

\r\n\r\n

distancefromlow\r\n2-set how many points second text is under low bar

\r\n\r\n

", "url": "https://www.mql5.com/en/market/product/36789", "small_icon": "https://c.mql5.com/31/316/timeprice-ratio-logo-60x60-5805.png", "middle_icon": "https://c.mql5.com/31/440/timeprice-ratio-logo-140x140-1593.png", "icon": "https://c.mql5.com/31/316/timeprice-ratio-logo-200x200-7881.png", "rating": 0, "price": 54, "published": 1556547340, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36816, "title": "NightSniperMT5", "description": "

NightSniperMT5 is a fully automatic multi-currency trading system for night scalping.

Features

The EA trades on 28 major majors and crosses, Gold, Silver.
The Adviser does not use risky techniques
The Expert Advisor uses the minimum number of input parameters available for understanding
The adviser sets a fixed and hidden stop loss and take profit for all orders from the broker
The EA uses the magic number Magic to identify its orders

Recommendations

Any broker with a narrow spread and fast execution of orders is suitable for trading
The minimum recommended deposit is $100
The Expert Advisor can be used with default parameters, it is enough to install the Expert Advisor on the chart

Parameters

Magic - magic number
Lot - order volume
TradeMode - trading mode, either only on the current chart, or from a single chart for all symbols
Symbols - a list of symbols for trading in the single chart mode for all symbols from this list

Before allowing an expert to trade on a particular currency pair, test the symbol in the tester on the history of your broker, because the Expert Advisor is sensitive to the spread and execution speed. A high profit in the past does not guarantee the same high in the future.

", "url": "https://www.mql5.com/en/market/product/36816", "small_icon": "https://c.mql5.com/31/316/nightsnipermt5-logo-60x60-4134.png", "middle_icon": "https://c.mql5.com/31/439/nightsnipermt5-logo-140x140-6605.png", "icon": "https://c.mql5.com/31/316/nightsnipermt5-logo-200x200-6461.png", "rating": 1.5, "price": 0, "published": 1552684581, "popularity": 0, "category": "Expert", "votes": 2 }, { "id": 36819, "title": "STFX Binary Technologies", "description": "

EA STFX BINARY TECHNOLOGIES

EA STFX Binary Technologies is specifically designed for Binary MT5 products Volatility Index 75 and 100
The Expert Advisor can be used for Full Automatic and Semi Automated trading.
EA STFX has various strategies such as: Day Trade, Averagging , Martingale, Anti Martingale and or combine the two
Trading positions can be closed easily using panels such as close profit only, close buy, close sell, close all transactions
The choice of indicators for position entries used is PSAR, Bollinger Band, MACD, Sthochastic, QQE

SMART FEATURE FOR MARTINGALE AND STRATEGIES

Entry position and addition of levels only in the buy or sell signal area.
Example : used MACD indicator if the main line is greater than the signal line ( signal Buy ) the EA will open the Buy transaction and when the indicator changes direction to main line smaller than the signal line (signal sell) EA will not increase the buy position level, in this case EA immediately takes the Sell position until the signal is showing the buy signal then EA will continue the next buy level until the position is closed in profit.

Recommended parameter template settings :

Use time frame M1 or M5 ( Index Volatility 75 )
Use indicator ( QQE or Bolinger Band )
Use max Lot ( Consevative - 3 , Moderate - 5 , Agresive - 10 )
Conservative : Deposit $500 - 1.000 , Moderate : Deposit $ 2.000 - 5000 , Agressive : Deposit $10.000 more.
Conservative : Target 5-10 % , Moderate : Target 15-35 % , Agressive : Target 40-100 %
Download template Strategy 1 ( Conservative )
Download template Strategy 2 ( Moderate )
Download template Strategy 3 (Agresive )
please contact me for datail.
Click for open account Volatility Index Binary

Parameters of the Expert Advisor

Lot = 0.01 ( usually starting from the smallest )
Take profit = 1000 ( 10.000.000 point in index volatility 75 ( if 0.01 lot=$10 , 0.1 lot = $100 , 1 lot = $1000 )
Stop loss = 0

Semi Auto Trade Mode

use manual TR : true ( Manual position entry with trailling stop active )
use manual martingal ( Manual position entry )
use manual anti martingale ( Manual position entry )

Full Automatic Trade Mode

use automatic trade : true (EA is full automatically active )
use martingal : true (EA automatically uses martingale )
use anti martingale : true ( EA automatically uses anti martingale )

Martingale setting prameter

Distance : -500 ( must use mines for the distance point of the martingale )
Max level buy : 10 (maximum open buy position)
Max level sell : 10 (maximum open sell position)

Anti Martingale setting prameter

Distance : 500 ( dont use mines for the distance point of the anti martingale )
Max level buy : 10 (maximum open buy position)
Max level sell : 10 (maximum open sell position)

Multiplier setting

Multiplier martingale : 1 ( initial lot multiplier x1 )
Multiplier antivmartingale : 1 ( initial lot multiplier x1 )
Add lot martingale : 0.01 ( addition of 0.01 lot every level)
Add lot anti martingale : 0.01 ( addition of 0.01 lot every level )
Reset after loss : 0 ( if 0 = disable )
Reset after profit : 1 ( if 1 = all transactions are closed profit then the level starts from the beginning again )

Initial Trade for Automtic trade entry

Automatic trade Stochastich : false ( false = not used , true = used )
Automatic trade Bolinger Band : false ( false = not used , true = used )
Automatic trade MACD : false ( false = not used , true = used )
Automatic trade QQE : true ( used ) ( false = not used , true = used )
Automatic trade ST : false ( false = not used , true = used )

Trailling Stop setting

Use trailling stop : true
Use trailling all trade : true
Use trailling money : true
Use trailling all money : true

Breakevent Setting

Use Break Even Stop : false
BEP Start : 160 ( in point )
BEP stop : 102 ( in point )

Trading Hour

Start trade : 00:00 ( server time )
End Trade : 24:00 ( server time )
Modify SL : 0
Modify TP : 0

Display info

Show chart panel A : true
Show chart panel B : true

Portfolio real acccount Volatility Index 75 Binary :

https://www.youtube.com/watch?v=TFE2HGvCn14

Direct Support Click Via:

WHATSAPP

TELEGRAM

FACEBOOK

YOUTUBE

STFX TECHNOLOGIES

PAMM Fund Manager - EA Developer - Trading Education

Link WhatsApp : https://api.whatsapp.com/send/?phone=6287780030800&text&app_absent=0
WhatsApp Number : +6287780030800
please chat to whatsapp for more detailed info

", "url": "https://www.mql5.com/en/market/product/36819", "small_icon": "https://c.mql5.com/31/316/stfx-binary-technologies-logo-60x60-5786.png", "middle_icon": "https://c.mql5.com/31/441/stfx-binary-technologies-logo-140x140-5248.png", "icon": "https://c.mql5.com/31/316/stfx-binary-technologies-logo-200x200-4247.png", "rating": 0, "price": 2000, "published": 1552689203, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36852, "title": "OrionMT5", "description": "

The algorithm of the adviser calculates zones of consolidation of the price and the most tentative variants of price movements.

Due to the unique method of determining candlestick patterns in the near past, a trade expert adapts to changing market conditions with minimal delay. This allows you to trust the adviser to work offline for quite a long time without the need for frequent monitoring.

The Expert Advisor was developed in the conditions of \"floating\" delay in the execution of trade orders and with a real spread.

Each position has a stop loss and take profit. Built-in trailing stop controls each position.

Advisor corresponds to the FIFO.

Methods of averaging and increasing the lot are ABSENT.

Recommended trading tools - 15m: GBPUSD, EURUSD, USDCAD.

Settings:

MaxRisk - Parameter for the calculation of the trading lot (money management);
if MaxRisk = 0, Lot will be - If if MaxRisk = 0, the lot will be like this;
Take Profit - Take Profit;
Stop Loss - Stop Loss;
SAR-step - SAR indicator step;
Trailing-stop on / off - Ability to disable the trailing stop;
Trailing start - start trailing stop;
First Trailing Level - The first level of stop loss for a trailing stop;
Trailing step - step trailing stop;
Use the adviser's working time? - The use of trading time;
The hour of commencement of trade - Hour start trading;
Minute of commencement of trade - Minute to start trading;
Hour of the end of trade - Hour of the end of trade;
Minute of the end of trade - Minute of the end of the trade;
Comment to orders - Comment to orders;
Slippage - Maximum slippage;
Max Spread - Maximum Spread;
Magic Number - The magic number for distinguishing your orders.

", "url": "https://www.mql5.com/en/market/product/36852", "small_icon": "https://c.mql5.com/31/317/orionmt5-logo-60x60-5289.png", "middle_icon": "https://c.mql5.com/31/445/orionmt5-logo-140x140-4035.png", "icon": "https://c.mql5.com/31/317/orionmt5-logo-200x200-3594.png", "rating": 0, "price": 1399, "published": 1552836598, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36879, "title": "Oscillator trading signals", "url": "https://www.mql5.com/en/market/product/36879", "small_icon": "https://c.mql5.com/31/317/oscillator-trading-signals-logo-60x60-6510.png", "middle_icon": "https://c.mql5.com/31/441/oscillator-trading-signals-logo-140x140-8784.png", "icon": "https://c.mql5.com/31/317/oscillator-trading-signals-logo-200x200-8080.png", "rating": 0, "price": 50, "published": 1552911262, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36893, "title": "Automatic Fibonacci MT5", "description": "

\r\n Automatic Fibonacci is an indicator for automatic Fibonacci Levels drawing. It is fully customizable by user. User can \r\n also select different Fibobonacci Levels by user settings or can use multiple Automatic Fibonacci indicator in one chart. \r\n

\r\n

\r\n\r\n\r\n

\r\n

All details can be found >>HERE<<

\r\n

Instructions

\r\n\r\n\r\n

Move Indicator to the chart (simply drag and drop)
When pop up window appears select desired settings.
Confirm settings and enjoy the Automatic Fibonacci indicator.

\r\n\r\n\r\n

\r\n

Features

\r\n

\r\n\r\n\r\n

\r\n

Any chart
Any time-frame
Custom Fibonacci levels
Custom colors
Info-panel

\r\n\r\n\r\n

\r\n

Watch my other products:

\r\n

https://www.mql5.com/en/users/sevenfourseven/seller

\r\n

\r\n\r\n\r\n

Parameters

\r\n\r\n

\r\nGeneral Settings

\r\n\r\n\r\n

\r\n

UniqueName - Some unique name (Important if using more Automatic Fibonacci in one chart)
FiboStrength - Probably the most important parameter - Determines the strength of Fibonacci levels
FuturePaint - Distance from current time candle to print the Fibonacci labels
ShowInfoPanel - Show/Hide Info panel

\r\n

\r\nFibonacci Levels Settings

\r\n\r\n\r\n

\r\n

FiboBaseLevel0Color - Color for the First Fibonacci base level
FiboBaseLevel1Color - Color for the Second Fibonacci base level
FiboLevel2Value - 1st Custom Fibonacci level value
FiboLevel2Color - 1st Custom Fibonacci level color
FiboLevel3Value - 2nd Custom Fibonacci level value
FiboLevel3Color - 2nd Custom Fibonacci level color
FiboLevel4Value - 3rd Custom Fibonacci level value
FiboLevel4Color - 3rd Custom Fibonacci level color
FiboLevel5Value - 4th Custom Fibonacci level value
FiboLevel5Color - 4th Custom Fibonacci level color

\r\n

\r\nPanel Settings

\r\n\r\n\r\n

\r\n

PanelBackgroundColor - Panel background color
PanelHeaderColor - Panel header color
DefaultFontColor - Default font color
HeaderFontColor - Header font color

\r\n

\r\nOther Settings

\r\n

\r\n\r\n\r\n

UseLegacyStrategy: Enable/disable old legacy strategy algorithm

", "url": "https://www.mql5.com/en/market/product/36893", "small_icon": "https://c.mql5.com/31/317/automatic-fibonacci-mt5-logo-60x60-1905.png", "middle_icon": "https://c.mql5.com/31/438/automatic-fibonacci-mt5-logo-140x140-1259.png", "icon": "https://c.mql5.com/31/317/automatic-fibonacci-mt5-logo-200x200-2539.png", "rating": 0, "price": 30, "published": 1552941268, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36924, "title": "Walking Pips MT5", "description": "Walking Pips is a scalping Expert Advisor designed to work in a volatile market. It is suitable for working with any brokers, including American brokers, requiring FIFO to close primarily previously opened transactions. All orders are accompanied by a virtual stop loss and take profit in pips, and there are also breakeven and trailing stop functions. The chart displays information on the speed of order execution and slippage. Advisor does not use martingale or grid. The EA does not depend on the timeframe for which it is set; only price and time are used in the calculations.

MT4 version link

Recommendations

before using on real money, test the adviser with minimal risk on a cent trading account;
the most volatile pairs are suitable for work: GBPUSD, USDCAD, EURUSD, USDJPY, USDCHF, AUDUSD, NZDUSD.
minimum deposit - $ 100 per 0.01 lots;

The advisor provides protection:

The EA will stop losing trade if the number of losing orders in a row exceeds the specified value.
If the broker uses the plugin and deliberately slows down the execution of transactions, the adviser will automatically stop trading.
The EA will automatically stop trading if the slippage is greater than the maximum value you specified.
The EA will stop trading if the profit or loss is equal to the specified maximum values.

Parameters:

MAGIC_NUMBER - magic number of the transaction;
COMMENT - advisor comments in the order;
TIMER_SECONDS - the number of seconds to measure the speed of price movement;
PRICE_DISTANCE - extreme price increase in pips for N seconds to enter the market
MAX_OPEN_ORDERS - the maximum number of simultaneously open orders for one trading instrument;
MAX_SLIPPAGE - maximum slippage when opening a deal;
COMMISSION_CONTROL - if the broker has a transaction fee, set the flag COMMISSION_CONTROL = true. To check the commission, the adviser will immediately open a deal with a minimum lot per symbol. Do not be alarmed. This will happen only 1 time;
COMMISSION_PER_LOT - or you can set the commission size manually, then the adviser will take this value into account when opening and closing orders, set as a commission for 1 lot;
MAX_SPREAD - maximum spread when opening a deal;
MIN_OPENING_INTERVAL - minimum interval between opening new orders in seconds;
CLOSE_ORDER_DELAY - minimum transaction duration in seconds;
TAKEPROFIT - take profit in pips;
STOPLOSS - stop loss in pips;
USE_BREAKEVEN - use breakeven of open positions;
BREAKEVEN_START - profit in pips, after which the stop loss is set to breakeven + BREAKEVEN_PROFIT pips;
BREAKEVEN_PROFIT - the number of profit points when closing orders at the breakeven level;
USE_TRAILING - use a virtual trailing stop. If USE_BREAKEVEN = true, then the trailing stop will start to work only when the stop loss is set to breakeven + BREAKEVEN_PROFIT pips;
TRAILING_STEP - step of the trailing stop in pips which remains for the price movement after modifying the stop loss, is set in points;
TRAILING_STOP - the size of the trailing stop in pips, by which the fixed profit will change, is set in points;
RISK_PERCENT - calculation of a trading lot depending on the risk per trade. If = 0, then not used;
FROM_BALANCE - calculation of the trading lot from the balance. Formula: Balance / FROM_BALANCE * LOTS. If = 0, then not used;
LOTS - fixed lot if RISK_PERCENT = 0 and FROM_BALANCE = 0;
MAX_LOTS - maximum lot;

", "url": "https://www.mql5.com/en/market/product/36924", "small_icon": "https://c.mql5.com/31/721/walking-pips-mt5-logo-60x60-1620.png", "middle_icon": "https://c.mql5.com/31/721/walking-pips-mt5-logo-140x140-6351.png", "icon": "https://c.mql5.com/31/721/walking-pips-mt5-logo-200x200-7031.png", "rating": 0, "price": 360, "published": 1577542191, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36928, "title": "Ultra Trend Hunter", "url": "https://www.mql5.com/en/market/product/36928", "small_icon": "https://c.mql5.com/31/317/ultra-trend-hunter-logo-60x60-2253.png", "middle_icon": "https://c.mql5.com/31/441/ultra-trend-hunter-logo-140x140-8643.png", "icon": "https://c.mql5.com/31/317/ultra-trend-hunter-logo-200x200-4199.png", "rating": 0, "price": 0, "published": 1553066510, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36955, "title": "BeST Chande TrendScore Indicator MT5", "description": "

BeST_Chande TrendScore Indicator points the start of a trend with high degree of accuracy and it is amazing for scalping on the 1min timeframe. It is also a simple way to rate trend strength. It indicates both the direction and strength of a trend and can be easily combined with various trend-following, swing and scalping strategies.As of a trend’s direction and strength a value of +10 signals a strong uptrend while a value of -10 signals a strong downtrend. Generally a positive score shows an upward trend bias while a negative score shows a downward bias. The TrendScore is pinned to +10 during major portions of the upward moves and to –10 during major portions of the upward moves while it is quick to change directions during sideways periods.

TrendScore Indicator

is great for trend trading
is great for swing trading
is great for scalping
does not repaint
works on any timeframe
works on any Symbol
is simple and easy to use

TrendScore Indicator was devised by Tushar S. Chande and he explained all about its use at his article in Stocks & Commodities: “Rating Trend Strength”.

TrendScore Indicator can be traded in many ways. The approach we choose depends on our trading style:

You can use the zero crossing as an early signal and then buy when the trendscore becomes positive or equal to +10 and sell when it becomes negative or equal to –10.
Also as a filter you can wait one to three bars after the TrendScore reaches +10 or -10 before buying (+ 10) or selling (-10).
Or you can combine the trendscore with a moving average, trading an upward or downward crossover.
Another variation would be to go long after the trendscore crosses from -10 to above +5 and go short after the trendscore falls from +10 to below 5.

You could also combine TrendScore with other indicators of trend strength. For example, if you combine it with the ADX indicator Trendscore would provide an indication of direction, while the ADX can provide additional information about the trend's strength. You could also for example use H1 data to calculate a trend's score and make trades based on a lower timeframe like M15,M5 or M1 etc.

Inputs

The only Input parameters of the indicator are the following:

Select Color of TrendScore Indicator
Select Width of TrendScore Indicator

For EA Developers

TrendScore Buffer = 1", "url": "https://www.mql5.com/en/market/product/36955", "small_icon": "https://c.mql5.com/31/318/best-chande-trendscore-indicator-mt5-logo-60x60-2120.png", "middle_icon": "https://c.mql5.com/31/446/best-chande-trendscore-indicator-mt5-logo-140x140-4586.png", "icon": "https://c.mql5.com/31/318/best-chande-trendscore-indicator-mt5-logo-200x200-9459.png", "rating": 0, "price": 35, "published": 1553157946, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36961, "title": "ATS Quantum MT5", "description": "

This long-term trading system works on 20 pairs and 1 timeframes. The Expert Advisor uses various trading systems, such as trend trading, countertrend trading and others. This increases the chances of sustained growth and reduces exposure to a single pair or individual operations. The risk is tightly controlled.

The EA has the built-in smart adaptive profit fixing filter.

The robot has been optimized for each currency and timeframe simultaneously.

It does not need arrival of every tick and high execution speed. The EA works with all brokers.

Attention! This EA is only for \"hedging\" accounts.

Monitoring: https://www.mql5.com/en/signals/author/profi_mql

МetaТrader 4 version: https://www.mql5.com/en/market/product/24460

No martingale, grid and other risky strategies.

Economic news are used.

For the EA operation, open Tools > Options > Expert Advisors. Check the option \"Allow WebRequests for listed URL:\". Add https://ec.forexprostools.com, https://world-time-zone1.com and click OK.

Multi_Currency_BackTest - if set to true, a multi-currency tester is used. If the parameter is set to false, the current currency and timeframe is used.

For quick test use:

Tick simulation methods:

Control points (nearest less timeframe) .

Pairs and timeframe

The EA optimized for the following pairs:

EURUSD / M5.
GBPUSD / M5.
GBPJPY / M5.
USDCHF / M5.
USDJPY / M5.
AUDUSD / M5.
GBPAUD / M5.
USDCAD / M5.
GBPCAD / M5.
EURAUD / M5.
EURCAD / M5.
EURGBP / M5.
EURJPY / M5.
GBPCHF / M5.
NZDUSD / M5.
GBPNZD / M5.
AUDCAD / M5.
NZDCAD / M5.
AUDNZD / M5.
EURNZD / M5.

Requirements and recommendations

The EA is attached to only one chart (any of the working pairs) - all trading on all pairs is carried out from only one chart! In the settings you can enable and disable currencies.
The minimum recommended balance for the EA's use with the recommended pairs and timeframes - $1000 or $10 on a cent account.
VPS.

Main parameters

EURUSD - if true, use EURUSD;
...
EURNZD - if true, use EURNZD;
Magic_Start - ID of EA's trades.
Magic_Finish - ID of EA's trades.
Symbols_Prefix(Suffix)_Name - enter the prefix (suffix) ONLY if the name of the symbols uses a suffix (for example: \"m.\"(\".m\") if the symbol name is \"m.EURUSD\"(\"EURUSD.m\"));
Use_Risk_StopLoss - The risk-based stop loss.

Custom_balance - FreeMargin = false or Balance = true.
Percentage Risk — interest risk based on stop loss.

Fixed_Lot - fixed lot (if Use_Risk_StopLoss is false);
Order Type - trading direction;
Order Comment - comments to orders;
Slippage - allowed slippage before an order is triggered;
Show_Info_Panel - use the information panel (false - faster backtest);
Show_additional_panel - use the info panel for profit indicator per each month, for backtest only;
Multi_Currency_BackTest:

true - use the multi-currency tester;
false - use the current currency and timeframe;

Adaptation of the spread to the stop loss - adapt the stop loss to spread;
Max Spread - maximum spread;
Stop strategy trend - disable trend-following trading for a certain time (from 5 minutes to 24 hours) if the average spread exceeds Max_Spread;
Economic news filter:

Select http or https - select Protocol to download economic news;

http
https

use_high(medium/low)_news - trade high/medium/low-impact news;
News_update_every_N_minutes - update news every N minutes;
Colors of news lines on the chart;
Show time on lines - show time for news lines;
Style/width_Lines - style/width of lines.

Trading within the week:

Monday - trade on Monday;
...
Friday - trade on Friday.

Time trading within a day:

Use time - if true, the EA trades by time;
GMT setting - GMT settings;
GMT Auto ( only for real ) - automatic detection of the GMT shift (not for a tester);
GMT Mode - manual setting;
GMT_mode - GMT offset of the broker server time (0 - off);
Every_Day_Start - start time (hh:mm);
Every_Day_End - end time (hh:mm).

Time to disable on Friday:

Use time - if true, the EA trades by time;
Disable_in_Friday - end time on Friday (hh:mm).

", "url": "https://www.mql5.com/en/market/product/36961", "small_icon": "https://c.mql5.com/31/318/ats-quantum-mt5-logo-60x60-9642.png", "middle_icon": "https://c.mql5.com/31/445/ats-quantum-mt5-logo-140x140-6052.png", "icon": "https://c.mql5.com/31/318/ats-quantum-mt5-logo-200x200-5104.png", "rating": 0, "price": 70, "published": 1553159192, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36979, "title": "Cyberdev Peak ZigZag", "description": "

ZigZag with backlight Fibonacci levels. The indicator has the ability to set any number of levels, the signals of the intersection of which can be sent to your mobile device email, as well as viewed via alerts. The indicator is designed to perform wave analysis, search for harmonic petterns, as well as search for other technical analysis figures. This Zigzag uses the principle of constructing extrema in which any trader will understand very easily. First, the indicator finds the upper and lower peaks. The minPeriod parameter sets the minimum distance between them within which there are no more extreme peaks (see illustrations). The presence of peaks is all that is needed to build the extremes of the Zigzag. If the same extremes go in a row, the indicator selects the most extreme of them (see illustrations). The use of modern programming methods made it possible to make a thoughtful process of calculating extrema and to achieve optimal performance of the indicator. Also, the indicator is devoid of typical errors that other Zigzags usually make.

\r\n

Fibonacci levels and harmonic patterns

\r\n

Through the use of Fibonacci levels, the indicator can significantly facilitate the search for harmonic patterns and other figures, where the Fibonacci levels are used. The levels parameter allows you to specify as many levels as you like with any values, as well as the attributes of sending a signal at the intersection for each level separately. The rules for entering the levels parameter are as follows. If the level is conceived as a signal, then before its value you need to put the character \"s\". All levels should be separated by commas. Various options for entering the levels input parameter are allowed. The correct example is \"s0.618,0.786, s1.270,1.618\". Example of freelance input: \"s 0.618, S0.786, S 1.270, s1.618\". If you run the indicator with this line, on a chart or in a tester, it will correctly handle all levels as in the case of the first example. Thus, the indicator is protected from incorrect input. The main thing is to observe the correctness of the character \"s\", the numerical values of the projection, as well as the presence of the separator \",\".

\r\n

Input parameters

\r\n

minPeriod - the minimum number of bars between extremums
peakBacklight - highlight peaks
fibo - highlight Fibonacci levels
nBacklight - the number of extremums for highlighting Fib projections.
levelsEnabled - enable Fib projection levels
levels - a string for specifying Fibo projection levels
testNotif - test of sending notifications to a mobile device and e-mail at start
mailSend - sending signals to e-mail
notifSend - sending signals to a mobile device
alert - to signal using alerts

", "url": "https://www.mql5.com/en/market/product/36979", "small_icon": "https://c.mql5.com/31/318/cyberdev-peak-zigzag-logo-60x60-3066.png", "middle_icon": "https://c.mql5.com/31/440/cyberdev-peak-zigzag-logo-140x140-9293.png", "icon": "https://c.mql5.com/31/318/cyberdev-peak-zigzag-logo-200x200-5912.png", "rating": 0, "price": 30, "published": 1554918843, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 36984, "title": "Time Out", "description": "

I present to your attention experimentally, a new EA that forms the trading range of the time interval. The EA has built-in proprietary algorithms for transaction support.

The emerging range is set manually by the EA settings, such ranges can be set up to two pieces. After a specified time and capture the trading range, the EA starts its work. When the price goes beyond the limits of this range, the EA opens an order with market execution, accompanying the transaction, placing Take profit and Stop loss. The EA has built-in protection against false breakouts of the range.

For a full introduction to the logic of the work, you can always contact me. I'll tell you the gist of my idea. The EA itself, I trade on the stock exchange, but this expert Advisor also trades on other platforms, the most important thing is that your broker would support the meta Trader 5 terminal.

Unfortunately, I cannot reveal the full essence of the logic of my trading, but I will give you a little hint: Trading ranges should be searched at the opening of sessions of different continents, as well as other ranges.

Input parameter

Channel1 - Активация первого канала
StartTime1- Старт формирования канала 1
StopTime1 - Конец формирования канала 1
Channel2 - Активация второго канала
StartTime2 - Старт формирования канала 2
StopTime2 - Конец формирования канала 2
Lots - Фиксированный лот
StopLoss - Стоп-лосс, если поставить 0, то советник сам будет выставлять стоп заявку по противоположной зоне.
TakeProfit - Тейк-профит, в пунктах если 0- то не используется.
BreakevenStart - активация безубытка при достижении прибыли в пунктах
BreakevenLevel - уровень безубытка
TrailingStart - Активация трейлинг-стопа, так же задается в пунктах
TrailingStep - Шаг трейлинг-стопа
EntryDelayTime - Задержка открытия ордера ( защита от ложного пробоя)
InstallDelayTimeSL - Задержка установки SL в секундах
DoubleEntryFirst - Запрет или активация отработки первого сигнала для открытия.
DoubleEntrySecond - Запрет или активация отработки второго сигнала для открытия.
Magic - Магический номер советника для отслеживания своих ордеров
Execution type - Тип исполнения ордеров

\r\n

", "url": "https://www.mql5.com/en/market/product/36984", "small_icon": "https://c.mql5.com/31/318/time-out-logo-60x60-9183.png", "middle_icon": "https://c.mql5.com/31/439/time-out-logo-140x140-7609.png", "icon": "https://c.mql5.com/31/318/time-out-logo-200x200-1691.png", "rating": 0, "price": 30, "published": 1553724469, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 36986, "title": "LekimdiKator", "description": "

PRICE RANGE CALCULATOR TRUST IN MY PRICES, BELIEVE, FAITH! Follow our videos on Youtube daily on the Lekimdikator Live! Lekimdikator calculates the best prices in the markets to enter or leave Use in conjunction with your favorite indicator! Learn how to trade on stock exchanges, Forex, Shares, Stock Options, Foreign Exchange, Investment Funds, Real Estate Funds or any market that has access to MetaTrader 5 with Lekimdikator It is a Tool for novice or experienced traders, everyone needs to use it to protect their accounts and get more discipline in the trades

", "url": "https://www.mql5.com/en/market/product/36986", "small_icon": "https://c.mql5.com/31/645/lekimdikator-logo-60x60-5749.png", "middle_icon": "https://c.mql5.com/31/645/lekimdikator-logo-140x140-8444.png", "icon": "https://c.mql5.com/31/645/lekimdikator-logo-200x200-6076.png", "rating": 0, "price": 30, "published": 1553200795, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 36994, "title": "BetaRebound", "url": "https://www.mql5.com/en/market/product/36994", "small_icon": "https://c.mql5.com/31/318/betarebound-logo-60x60-7578.png", "middle_icon": "https://c.mql5.com/31/440/betarebound-logo-140x140-8094.png", "icon": "https://c.mql5.com/31/318/betarebound-logo-200x200-6182.png", "rating": 0, "price": 30, "published": 1559790514, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 37027, "title": "Profit30 MT5", "description": "

The Profit30 for MT5 platform(Also Available for MT4 in Mql5 Market Place) Expert Adviser, uses 7 different 'price action \r\nstyle' system on the EURUSD pair, on the M5, M15, M30, H1 timeframes.Best optimized perform in H1 chart

\r\n

The EURUSD pair offers in general the best performance in the major \r\npart of the Profit30 EAs. In this EA, a selection of Profit30 systems has been \r\nrewritten and configured explicitly for get the best performance in the \r\nEURUSD pair.

\r\n

The EURUSD pair offers in general the best broker execution conditions, with the best spread and without important slippage.

\r\n\r\n\r\n

Is very lightweight in CPU / RAM resources. Only launches once at the beginning of the bar.

\r\nIs very easy to setup and don't require any extra supervision, can be connected 24x7. It can be used by newbies.

\r\n\r\nTry Back Test and Try on Demo Account and execute on Real Account.

\r\n

", "url": "https://www.mql5.com/en/market/product/37027", "small_icon": "https://c.mql5.com/31/357/profit30-mt5-logo-60x60-1199.png", "middle_icon": "https://c.mql5.com/31/438/profit30-mt5-logo-140x140-7813.png", "icon": "https://c.mql5.com/31/357/profit30-mt5-logo-200x200-9128.png", "rating": 0, "price": 50, "published": 1553353968, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 37061, "title": "Forex Relative Performance MT5", "description": "

Forex Relative Performance indicator

This indicator calculates the relative strength of major currencies against the US dollar.

The basic idea behind this indicator is \"to buy strong currency and to sell weak currency\".

This indicator allows you to quickly identify the best forex pair to trade according to your trading style (Intraday, Scalping, Swing, or Long Term)

", "url": "https://www.mql5.com/en/market/product/37061", "small_icon": "https://c.mql5.com/31/319/forex-relative-performance-mt5-logo-60x60-9054.png", "middle_icon": "https://c.mql5.com/31/440/forex-relative-performance-mt5-logo-140x140-3119.png", "icon": "https://c.mql5.com/31/319/forex-relative-performance-mt5-logo-200x200-8495.png", "rating": 0, "price": 324, "published": 1553456667, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 37115, "title": "Powerful Hidden Cross Signal", "description": "

The latest most requested Binary Options arrow indicator in the Garuda Signals product line is now on MT5!

Binary options signal based on multiple time frame cross over analysis. Gets confirmation from the most consistent signals known to man; Ichimoku, SMA, Bollinger Bands; and also uses the 1 Hour time frame as trend confirmation , so you don't have to open up multiple chart and waste time.

- Can be used for all time frames up to 1 hour, but is most POWERFUL for 1 and 5 min options.

- Place your Call/PUT based on the Arrow signal direction.

- Comes with Alert. So you never miss the money trade. (once the alert pops up, get ready to place entry on the next candle)

- Be prepared for around at least 2 to 3 signals per hour.

- Be prepared to finally make money.

Set expiry for one or two candles after the signal candle.

Works well if you use an automated Binary Trading bot. Set the bot when markets are most likely to trend.

Lets go, join the flock!

", "url": "https://www.mql5.com/en/market/product/37115", "small_icon": "https://c.mql5.com/31/319/powerful-hidden-cross-signal-logo-60x60-5400.png", "middle_icon": "https://c.mql5.com/31/445/powerful-hidden-cross-signal-logo-140x140-9957.png", "icon": "https://c.mql5.com/31/319/powerful-hidden-cross-signal-logo-200x200-1582.png", "rating": 0, "price": 300, "published": 1553603254, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 37118, "title": "Exit Area Ultimate MT5", "description": "

The Exit Area Ultimate is a technical indicator designed to enhance trading decisions by indicating the daily Average True Range (ATR) and Average Daily Rate (ADR) levels on the chart. By understanding these levels, traders can easily assess the average movement of an asset throughout the day. This versatile indicator serves multiple purposes for day traders, aiding in order placement, identifying intraday tendencies, setting trailing stop loss levels, and establishing daily take profit levels.

One of the key features of this indicator is its reliance on the ATR and ADR indicators, which provide valuable insights into market volatility and price range. Traders can use this information to determine appropriate take profit and stop loss levels, optimizing their risk management strategies. The indicator also calculates the remaining pips based on the indicated levels, allowing for quick assessment of potential profit or loss.

The Exit Area Ultimate is compatible with every symbol, enabling traders to apply it to a wide range of assets. Additionally, each indicator level can be activated or deactivated based on individual preferences and trading strategies. Traders have the flexibility to customize the indicator levels according to their specific requirements.

To ensure timely notifications, the indicator offers mobile, email, and pop-up alerts, allowing traders to stay informed about important market developments. These alerts can be quickly configured and customized to suit individual preferences.

In terms of parameters, the Exit Area Ultimate provides various settings for ATR and ADR. Traders can adjust the averaging periods and choose whether to display the ATR and ADR levels on the chart. The indicator also offers common filters, such as a multiplier for the ATR/ADR, as well as alert filters to control the frequency of notifications.

Graphical parameters allow for visual customization of the ATR and ADR lines, including line colors, styles, and widths. This enables traders to personalize the indicator's appearance on the chart, making it more intuitive and visually appealing.

Overall, the Exit Area Ultimate is a comprehensive and user friendly indicator that empowers traders with essential information about market volatility and daily price ranges. Its features, such as customizable indicator levels, notification alerts, and visual customization options, make it a valuable tool for traders seeking to optimize their trading strategies and achieve better risk management.

Parameters

ATR Parameters - Customize ATR indicator.
ADR Parameters - Customize ADR indicator.
Common Filters - Customize common indicator conditions.
Alert Parameters - Customize alerts for specific conditions.
Graphic Parameters - Customize visual appearance and colors.

", "url": "https://www.mql5.com/en/market/product/37118", "small_icon": "https://c.mql5.com/31/1938/exit-area-ultimate-mt5-logo-60x60-2066.png", "middle_icon": "https://c.mql5.com/31/1938/exit-area-ultimate-mt5-logo-140x140-1080.png", "icon": "https://c.mql5.com/31/1938/exit-area-ultimate-mt5-logo-200x200-3559.png", "rating": 0, "price": 38, "published": 1553672579, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 37180, "title": "EA Vertical MT5", "description": "

The initial price is 89 USD, the future price is 200 USD

Trading is carried out by market orders from important price levels, which are determined by an advanced adaptive algorithm EA. the Algorithm allows you to determine the dynamic levels of price changes, which gives the EA the ability to quickly find entry points. The EA determines the short-term trend and opens a position with a subsequent partial closure, the average position is open for several hours.

The EA trades many major currency pairs.

Does not use martingale, grid and other risky strategies.

EA uses timeframes:

MetaTrader 4	MetaTrader 5
M5, M15, M30, H1	M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3

Real monitoring: https://www.mql5.com/en/signals/1302291

Monitoring: https://www.mql5.com/en/signals/author/profi_mql

МetaТrader 4 version: https://www.mql5.com/en/market/product/37096

Requirements and Recommendations

The EA is attached to only one chart (any of the working pairs and any timeframe) - all trading on all pairs is carried out from only one chart! In the settings you can enable and disable currencies.
The minimum recommended balance for the EA's use with the recommended pairs and timeframes - $2000 or $20 on a cent account.
5-digit brokers.
VPS.
If you use several advisors on the same account, make sure that all the advisors have different Magic numbers.
Attention! This EA is only for \"hedging\" accounts.
For the EA operation, open \"Tools\" > \"Options\" > \"Expert Advisors\". Check the option \"Allow WebRequests for listed URL:\". Add https://ec.forexprostools.com, https://world-time-zone1.com and click OK.
Instructions for reducing the amount of RAM for EA: post/744213 ( the EA requires a minimum of 10000 bars in the history ).

Multi_Currency_BackTest - if set to true, a multi-currency tester is used.

When using the multi-currency tester, select the M5 timeframe.

For quick test, use:

Tick simulation methods:

M1 OHLC (simulation of 1-minute bars, OHLC prices)

pairs

EURUSD
GBPUSD
GBPJPY
USDCHF
USDJPY
AUDUSD
GBPAUD
USDCAD
GBPCAD
EURAUD
EURCAD
EURJPY
GBPCHF
NZDUSD
GBPNZD
EURNZD
AUDJPY

Parameters

EURUSD - if true, use EURUSD;
...
EURNZD - if true, use EURNZD;

Magic_Start - ID of EA's trades.
Magic_Finish - ID of EA's trades.
Symbols_Prefix(Suffix)_Name - enter the prefix (suffix) ONLY if the name of the symbols uses a suffix (for example: \"m.\"(\".m\") if the symbol name is \"m.EURUSD\"(\"EURUSD.m\"));
Custom_Risk - if true, the lot size increases when account balance grows (risk management);

User_Balance - user-defined balance;
Add_to_User_Balance % - Add to User_Balance for a smooth transition to a new lot.
Lot on every - lot size per User_Balance;

Fixed_Lot - fixed lot (if Custom_Risk is false);
Order Type - trading direction;
Order Comment - comments to orders;
Slippage - allowed slippage before an order is triggered;
Show_Info_Panel - use the information panel (false - faster backtest);
Show_additional_panel - use the info panel for profit indicator per each month, for backtest only;
Multi_Currency_BackTest:

true - use the multi-currency tester;
false - use the current currency and timeframe;

Adaptation of the spread to the stop loss - adapt the stop loss to spread;
Max Spread - maximum allowed spread;
Stop trade - disable trading for a certain time (from 5 minutes to 24 hours) if the average spread exceeds Max_Spread;
Select http or https - the Protocol to download the economic news;

http
https
News_update_every_N_minutes - update news every N minutes;

Trading within the week:

Monday - trade on Monday;
...
Friday - trade on Friday.

Time trading within a day:

Use time - if true, the EA trades by time;
GMT setting - GMT settings;

GMT Auto ( only for real ) - automatic detection of the GMT shift (not for a tester);
GMT Mode - manual setting;

GMT_mode - GMT offset of the broker server time (0 - disabled);
Every_Day_Start - operation start time (hh:mm);
Every_Day_End - operation end time (hh:mm).

Time to disable on Friday:

Use time - if true, the EA trades by time;
Disable_in_Friday - operation end time on Friday (hh:mm).

", "url": "https://www.mql5.com/en/market/product/37180", "small_icon": "https://c.mql5.com/31/319/ea-vertical-mt5-logo-60x60-3146.png", "middle_icon": "https://c.mql5.com/31/439/ea-vertical-mt5-logo-140x140-7770.png", "icon": "https://c.mql5.com/31/319/ea-vertical-mt5-logo-200x200-2224.png", "rating": 0, "price": 57, "published": 1554387870, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 37199, "title": "Cointegration Pair Trading Indicator", "description": "

Cointegration Pair Trading Indicator

Indicator for statistical and quantitative pair trading strategies. You can perform Long&Short or Long&Long/Short&Short between two different assets.
The indicator performs a series of statistical tests between the assets and shows whether the pair is cointegrated or not.

\r\n

\r\nSuggested Usage Strategies

\r\n

(a) Verify if that the pair is cointegrated by the ADF test (Augmented Dickey-Fuller Test). 0% means the pair is not cointegrated; 90% 95% 97.5% and 99% means it is cointegrated (the greater the better).
(b) Check if beta is positive or negative and the pair correlation.
If beta is positive check if the correlation is positive (Fisher test always greater than zero, Min > 0%).
If beta is negative check if the correlation is negative (Fisher test always lesser than zero, Max < 0%).

For positive beta and Fisher always greater than zero, Long&Short situation:

When the residual line (blue) reaches the upper band sell the main asset and buy the secondary asset (expecting a reversal to normality).

When the residual line (blue) reaches the bottom band buy the main asset and sell the secondary asset (expecting a reversal to normality).

\r\n

For negative beta and Fisher always lesser than zero, Long&Long or Short&Short situation:

When the residual line (blue) reaches the upper band sell the main asset and sell the secondary asset (expecting a reversal to normality).

When the residual line (blue) reaches the bottom band buy the main asset and buy the secondary asset (expecting a reversal to normality).

\r\nLot Size Proportion
The lot size proportion is given by beta. To know secondary asset lot size just multiply primary asset lot by beta.
Ex: For beta 0.5 and primary lot = 10 secondary lot size would be 5.

\r\n

Parameter list

Second symbol: Second Asset
Timeframe: What timeframe to use in calculations
Candles to calculate: How many candles to run the tests (ADF, Fisher)
Regression: Linear regression type, simple or multiple (with trend)***
Beta candles: How many candles calculate beta variation/beta rotation (yellow line)
Deviation first line: Standard deviations to plot first line
Deviation second line: Standard deviations to plot second line
Save CPU: Recalculate only when closing a candle (and not on any price change)
Play Alarm: Play alarm when residual is beyond first deviation line

\r\n

Important! AxB cointegration is different than BxA

Its correlation (ratio and Fisher) is the same but\r\nnot the cointegration (ADF test and the linear regression to calculate\r\nnormality and residual standard deviations).
\r\nSo, AxB may not be cointegrated and not recommended for trading but BxA may be cointegrated\r\nand triggering a trade.

\r\n

*** Warning: to calculate a multiple linear regression is a CPU hungry process. This\r\nis impossible to change and the code is already optimized to its maximum. If\r\n“Beta Candles” is set to 50, 100 multiple linear regressions will be calculated\r\nto compared each linear regression individual beta. When calculating, a CPU\r\nusage spike is to be expected, especially if using the indicator on multiple\r\npairs. If indicator became too slow, try to reduce beta candles.

\r\n

", "url": "https://www.mql5.com/en/market/product/37199", "small_icon": "https://c.mql5.com/31/320/cointegration-pair-trading-indicator-logo-60x60-9284.png", "middle_icon": "https://c.mql5.com/31/441/cointegration-pair-trading-indicator-logo-140x140-8736.png", "icon": "https://c.mql5.com/31/320/cointegration-pair-trading-indicator-logo-200x200-3558.png", "rating": 3.7142856121063232, "price": 39.99, "published": 1553800710, "popularity": 0, "category": "Indicator", "votes": 7 }, { "id": 37259, "title": "Support and Resistance with Trendlines", "description": "

This indicator would help you IDENTIFY different HORIZONTAL SUPPORT / RESISTANCE LEVELS AND TRENDLINES.

ADVANTAGES:

\r\n

Use up till 5 different levels of Support and Resistance
Use up till 5 different trend lines
Use true/false options to display for Support/Resistance or Trend line Image

PARAMETERS:

\r\n

nPeriod: the time period to decide
Limits: the candles limit to look back
UseHorizontalLines: true/false option to display Horizontal Support and Resistance Lines
UseTrendline: true/false option to display Trend lines

\r\n

", "url": "https://www.mql5.com/en/market/product/37259", "small_icon": "https://c.mql5.com/31/320/support-and-resistance-with-trendlines-logo-60x60-6756.png", "middle_icon": "https://c.mql5.com/31/445/support-and-resistance-with-trendlines-logo-140x140-1718.png", "icon": "https://c.mql5.com/31/320/support-and-resistance-with-trendlines-logo-200x200-8025.png", "rating": 0, "price": 50, "published": 1553952360, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 37298, "title": "AutoBuy", "description": "

AutoBuy - is a script place pending buy stop orders with automatic calculation of the volume (number of shares) depending on the risk of money on the deal.

Inputs:

Risk - number in USD of money put on the trade.
BuyHighStep - the number of USD, a step up from the rates High of the current candle (bar) stock up to buy. Minimum value is 0.01
StopLossStep - the number in USD, the step from the price of the buy stop order down to close the deal at a loss. The minimum value of 0.10
TakeProfitStep - the number in USD, the step from the price of the buy stop order up to close trades in profit. The minimum value is 0 - means that Take Profit is not installed.

", "url": "https://www.mql5.com/en/market/product/37298", "small_icon": "https://c.mql5.com/31/321/autobuy-logo-60x60-1079.png", "middle_icon": "https://c.mql5.com/31/446/autobuy-logo-140x140-6249.png", "icon": "https://c.mql5.com/31/321/autobuy-logo-200x200-6124.png", "rating": 0, "price": 40, "published": 1554135897, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 37318, "title": "MarketGauge", "description": "

This is a cluster expert adviser. It allows for trading an arbitrary set of instruments, which may include Forex currencies, indices, goods, stocks, etc. It's based on algorithm used by SuperIndices indicator (the indicator itself is not required, but can be useful for visual analysis).

\r\n

The trading strategy is to buy assets in upper part of the indicator and sell assets in lower part. You can choose the signal strength for entering and exiting the market. If the signal becomes stronger by predefined step, it's possible to increase existing position. You are free to select your favorite instruments in the cluster, and trade any combination of them.

\r\n

It's highly recommended to include into the cluster not only work symbols you're going to trade, but also related indicatives (stock market indices, goods, etc.) and \"eternal values\", such as gold and oil. This forms more complete picture of the market and makes signals more reliable.

\r\n

\r\nParameters
\r\n

IndicatorSymbols - a comma separated list of market symbols passed to underlying indicator; this is the cluster being analyzed; empty by default due to automatic validation in MQL5 Market, but this is not normal operating mode - don't use it; right after obtaining EA, enter a cluster containing several instruments (maximum - 15); the more instruments you specify, the better - it increases the accuracy of signals; yet, this implies more overheads in calculations;
TradeSymbols - a comma separated list of work symbols allowed for trading (without quotes, no spaces); empty by default, which means trading current chart symbol only; it's recommended to specify several symbols for more stable results; all trade symbols should derive from the cluster symbols directly or indirectly, and they must exist on your server; for example, having EURUSD and USDJPY in the cluster one may trade EURJPY; but having XAUUSD and EURUSD does not allow to trade XAUEUR if your broker does not provide this ticker;
DefaultBase - default common currency for cross-rates calculations; USD is recommended;
LevelEnter - minimal signal level for opening position; this is a difference between 2 indicator lines as % of entire market range; by default - 75; position exists after the signal crosses LevelEnter up and up to the moment the signal crosses LevelExit down;
LevelStep - additional increase of signal strength (%), after which another market order is placed; by default - 12; for example, if position is opened at level 75, it can be enlarged when signal goes to 90+; takes effect only if MultipleOrders is enabled;
LevelExit - minimal signal level for keeping position, if signal goes below position is closed; the value is % of entire market range; by default - 30; if TrailingStop is on and StoplossRisk is specified, EA keeps position and trail the stop instead of closing position;
BarByBar - enable/disable trading mode by bars (true) or by ticks (false); default value - true;
Shift - bar index to take indicator values from: 0 or 1, depending from BarByBar mode and used MA Price type;
MultipleOrders - allow/disallow multiple orders for every work symbol; default value - true;
TrailingStop - enable/disable stop loss trailing; default value - false; takes effect only if RiskStoploss is specified;
FixedLot - fixed lot size for all instruments; 0 by default, which means minimal lot;
ExposureLot - percent of free margin to use, that is additional exposure implied by new lot; 0 - disabled; fractions are allowed, for example, 10 - 10%, 0.5 - 0.5%;
RiskLot - lot is calculated from potential loss size as a percent of equity, which may occur as a result of unfavorable price movement for latest weekly range (detected dynamically for every instrument and respects point value); 0 - disabled;
RiskStoploss - enable calculation of stop-order distance, that results in potential loss no more than given percent of equity, while trading with selected lot size; 0 - disabled;
MA Method - moving average method; by default - EMA;
MA Price - type of applied price for moving average; by default - open;
TimeSync - enable/disable intersymbol synchronization by 0-th bar time;

Recommended timeframes - H1, H4, D1.

Recommended deposit - from $10000.

Please find more details, examples and sets on the Comments tab.

", "url": "https://www.mql5.com/en/market/product/37318", "small_icon": "https://c.mql5.com/31/321/marketgauge-logo-60x60-3270.png", "middle_icon": "https://c.mql5.com/31/440/marketgauge-logo-140x140-7072.png", "icon": "https://c.mql5.com/31/321/marketgauge-logo-200x200-3704.png", "rating": 0, "price": 149, "published": 1554223808, "popularity": 0, "category": "Expert", "votes": 0 } ], "total": 26680 }

The revolutionary automatic adviser of the new generation with three parameters: \r\n\r\n\r\n\r\n Target profit per month (from 10% to 100%) \r\n Degree of risk (SuperLow, Low, Medium, High)\r\n Stop Loss Limit, USD\r\n\r\n\r\n\r\n\r\n Set up to work on EURUSD timeframe M15. \r\n

Works on HEDGING accounts with a leverage of 1:500 and a Deposit from 500USD.

Enough for work:

\r\n Decide on the size of the deposit that you can trust him \r\n Set the value of the desired profit per month (from 10 to 100 percent) \r\n Select the degree of risk (Low, Medium, High) \r\n

The Expert Advisor on its own selects the best trading strategy and adjusts the parameters for the work in order to satisfy the set goal.

The Stop Loss Limit parameter sets the loss value at which all orders are closed and trading stops until the START_trade button is \r\n pressed.

Built-in News filter: Advisor does not open new deals on the days of publication of decisions on rates of the Fed and the ECB.

Version for MT4 GS target: https://www.mql5.com/en/market/product/33127

The signal on the real account MT5 GS grid5 corresponds to the mode \"75%\", \"Medium\" : https://www.mql5.com/en/signals/636537

There are provisions for selective closing of orders manually.

If the Deposit decreases as a result of closing a losing order or withdrawing part of the Deposit, the EA will automatically \r\n recalculate the initial lot.

On the chart display button CloseSELL and CloseBUY and information about profit orders SELL and BUY.

In the 50% mode, the ONLY SELL, ONLY BUY, SELL+BUY buttons are displayed on the chart, setting the direction of trade.

Parameters

Screenshots results

Features

Input parameters

Important

Settings

ADVANTAGES:

FEATURES:

Indicator Installation

Your safety net to turn losing trades into winners

Features

How to get started

Usage Tips

Technical Information

Input Parameters

Author

Features

How to get started

Usage Tips

Technical Information

Input Parameters

Resources

Support and questions

Author

S&P 500 Market Regime Filter

Designed for Long-Term Investments

Key Features & Advantages

Gamma Bands

Parameters

Main Principles

Supported CSS selectors

Examples

Parameters

CCI Signal

Utility features

Input variables

Features

Input Parameters

Parameters:

Important Information

Parameters

FOREX Alligator Robot

Options:

Features

Input Settings

Optimization & Defaults

NightSniperMT5 is a fully automatic multi-currency trading system for night scalping.

Features

Recommendations

Parameters

EA STFX BINARY TECHNOLOGIES

SMART FEATURE FOR MARTINGALE AND STRATEGIES

WHATSAPP TELEGRAM FACEBOOK YOUTUBE

WHATSAPP

TELEGRAM

FACEBOOK

YOUTUBE

STFX TECHNOLOGIES

Settings:

Features

Parameters

Recommendations

The advisor provides protection:

Parameters:

For EA Developers

Pairs and timeframe

Requirements and recommendations

The revolutionary automatic adviser of the new generation with three parameters:
\r\n\r\n\r\n
\r\n
Target profit per month (from 10% to 100%)
\r\n
Degree of risk (SuperLow, Low, Medium, High)
\r\n
Stop Loss Limit, USD
\r\n
\r\n\r\n\r\n
\r\n Set up to work on EURUSD timeframe M15. \r\n

\r\n
Decide on the size of the deposit that you can trust him

\r\n
Set the value of the desired profit per month (from 10 to 100 percent)
\r\n
Select the degree of risk (Low, Medium, High)
\r\n

WHATSAPP

TELEGRAM

FACEBOOK

YOUTUBE

\r\nParameters
\r\n

Forex Market of trading robots, indicators and trading applications

Price

EU Savings Box EA

GS target5

Golden Ratio Oscillator

Trend dashboard MT5

Binary Absorption

Very useful information

Silver Line MT5

FX Market Correlation

Robonacci Universal

Wolfalizer

WOW Market Signal MT5

One click to close all

Directional Key To Change Symbols and TimeFrames

Smart Trading Signals

PZ Hedging EA MT5

PZ Stop And Reverse EA MT5

Stock Trader Pro MT5

Candle Transition

DBS Cluster Search

Time Adjusted ATR

Gamma Bands MT5

WebDataExtractor MT5

CCI Dashboard for MT5

AJiBoLangMT5

VWAPBands

Fractional calculus Indicator

Binary RSI

Stochastic Signals

TradeLeader Dolar Pontos Decisivos

CCI Signal For MT5

Smart DOM Driver

KT Asian Breakout MT5

Profit Ladder Mt5 EA

Survivor Advanced

SuperIndices MT5

Binary Bollinger

Binary 2SMA

Binary MACD

TradeOnNews

Divergence Scanner Macd Rsi 30 Pairs 8 Tf MT5

IRB Scalper Original

Alligator Agressive 500

Bar by Bar MT5

AIS Dynamic Geometric Filter MT5

Mac Undead

Dark Trader MT5

AIS Dual Lanczos Filter MT5

Night Scalper EA MT5

Brazil Options Greeks

TimePrice ratio

NightSniperMT5

STFX Binary Technologies

OrionMT5

Oscillator trading signals

Automatic Fibonacci MT5

Walking Pips MT5

Ultra Trend Hunter

BeST Chande TrendScore Indicator MT5

ATS Quantum MT5

Cyberdev Peak ZigZag

Time Out

LekimdiKator

BetaRebound

Profit30 MT5

Forex Relative Performance MT5

Powerful Hidden Cross Signal

Exit Area Ultimate MT5

EA Vertical MT5

Cointegration Pair Trading Indicator

Support and Resistance with Trendlines

AutoBuy

MarketGauge