{ "from": 26136, "count": 72, "list": [ { "id": 13371, "title": "Deep Moving Average", "description": "

Every indicator has its advantages and disadvantages. Trending ones show good signals during a trend, but lag during a flat. Flat ones thrive in the flat, but die off as soon as a trend comes. All this would not be a problem, if it was easy to predict when a flat changes to a trend and when a trend changes to a flat, but in practice it is an extremely serious task.

What if you develop such an algorithm, which could eliminate an indicator's flaws and enhance its strengths? What if such an algorithm could improve the operation of a trend indicator during a flat, but at the same time increase the efficiency during a trend, and fix the signals of a flat indicator during a trend and perfect them during a flat?

Deep is the algorithm that enhances the advantages of an indicator and reduces its disadvantages. This algorithm improves indicator quality as a result of combining neural networks with indicator algorithm.

About the Deep algorithm

The specified task, due to its non-reproducibility and complex regularity, are best soled by non-linear algorithms. Neural networks are a very versatile and powerful tool, which allows to achieve a lot, if the task is set correctly and the solution is formed reasonable. The algorithm is based on this tool.

This algorithm calculates the optimal periods of the moving average, depending on the state of the trend and the flat. The algorithm trains the neural network to predict the optimal moving average for each market condition, so the indicator adapts to the flat and trend, eliminating the shortcomings of the basic algorithm. In the flat condition, the neural network adapts the period of the moving average in the direction of the flat, in the trending condition in the direction of the trend.

The neural network architecture and the heuristic search algorithm were designed specifically for the optimal solution of the task. For convenience, there are Presets of the neural network structure, as well as all the necessary parameters for fine-tuning the neural network.

Advantages

To speed up calculations, you can use a graphics card (GPU), which greatly improves performance and results. In addition, the indicator can be calculated asynchronously using all the cores of your CPU and GPU.
The algorithm has a self-learning system. This is an adaptive system that helps to learn flexibly all the time using a neural network so that the algorithm always keeps up with all market changes.
Graphical control panel. Using the panel directly on the chart, you can flexibly control and manage the learning system.
Parameters for fine-tuning all functions.

", "url": "https://www.mql5.com/en/market/product/13371", "small_icon": "https://c.mql5.com/31/92/deep-moving-average-logo-60x60-9812.png", "middle_icon": "https://c.mql5.com/31/445/deep-moving-average-logo-140x140-6844.png", "icon": "https://c.mql5.com/31/92/deep-moving-average-logo-200x200-5179.png", "rating": 5, "price": 40, "published": 1450355746, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 13327, "title": "FlatLevels", "description": "

The indicator looks for flat zones, where the price remained within a certain range for quite a long time.

\r\n

Settings

\r\n

History - history for calculation/display in bars
FlatBars - flat area width in bars
FlatRange - flat area height in pips
IncludeSmallBar - calculate using internal flat bars
CalcFlatType - calculate flat zones by (HIGH_LOW/OPEN_CLOSE)
DistanceForCheck - distance (in pips) from the flat level, at which the check is enabled
CountSignals - amount of signals per level
AutoCalcRange - height auto calculation (auto calculate a flat zone height)
AutoCalcPeriod - height auto calculation period in bars
ShowFillBars - fill bars (on/off)

\r\n

Notification Settings

\r\n

ShowSignalLevel - display the levels, at which the signal appeared
UseAlert - use audio alert (on/off)
SoundFileName - .wav file: (file name in the \\Sounds\\ terminal folder)

\r\n

Level Display Settings

\r\n

ShowLevels - display flat levels (on/off)
HowManyLevels - amount of the last zones: flat zones used to build the levels
FillLevel - fill the level (on/off)
ColorBuyLevel - buy level color
ColorSellLevel - sell level color

", "url": "https://www.mql5.com/en/market/product/13327", "small_icon": "https://c.mql5.com/31/91/flatlevels-logo-60x60-6744.png", "middle_icon": "https://c.mql5.com/31/440/flatlevels-logo-140x140-2639.png", "icon": "https://c.mql5.com/31/91/flatlevels-logo-200x200-1364.png", "rating": 0, "price": 37, "published": 1450099285, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12999, "title": "Trend modified for mql5", "description": "

The draws trend lines with adjustable trend width, with trend breakout settings and notifications of trend breakout (Alert, Sound, Email) and of a new appeared arrow.

\r\n

Arrows point at the direction of the order to open (BUY, SELL).

\r\n

Parameters

\r\n

MaxHistoryBars - the number of bars in the history.
Depth (0 = automatic settings) - Search area.
width trend ( 0 = automatic settings) - Trend width.
(true = closed bars on direction trend),(false = just closed bars for line) - true = closure of candlesticks of the same color behind the line, false = simple closure of candlesticks behind the line.
Select closing - select closing.
number bars closed for line, for adjustment lines - number of candlesticks closed beyond the line to redraw the lines.
On what number bars move line, (0 = zero bar) - Forward shift of trend lines (number of candlesticks).
style 2 line trend - the style of two trend lines.
width 2 line trend - the width of two trend lines.
style Central line - the style of the central trend line.
width Central line - the width of the central trend line.
color line on direction up - the color of the up trend.
color line on direction down - the color of the down trend.
color line on direction direct - the color of flat.
if (trend) not finds wait N bars, then continue search - if no trend is found, wait N bars and continue search..
timeout N bars
the notification setup when breakdowns of the trend
sound signal - enable the sound alert.
name sound signal - the name of the sound wav file.
Alert - popup alert.
email - sending notification to email.
PUSH - push notifications.
setting notice arrow - arrow notification setup.
sound signal - enable the sound alert.
name sound signal - the name of the sound wav file.
Alert - popup alert.
email - sending notification to email.
PUSH - push notifications.
settings for arrows - arrow parameters.
include arrows - enable use of arrows.
Indent arrows from price - distance between the arrows and the price..
wrift arrow - the size of arrows.
color arrows BUY - the color of the BUY arrow.
color arrows SELL - the color of the SELL arrow.

", "url": "https://www.mql5.com/en/market/product/12999", "small_icon": "https://c.mql5.com/31/89/trend-modified-for-mql5-logo-60x60-7098.png", "middle_icon": "https://c.mql5.com/31/445/trend-modified-for-mql5-logo-140x140-4428.png", "icon": "https://c.mql5.com/31/89/trend-modified-for-mql5-logo-200x200-5256.png", "rating": 5, "price": 30, "published": 1448958310, "popularity": 0.36322033834726564, "category": "Indicator", "votes": 2 }, { "id": 13033, "title": "Wolfe waves modified for mql5", "description": "

This unique indicator automatically builds Wolfe Waves and features a highly efficient trading strategy.

\r\n

Use

\r\n

If number 5 appears, wait till the first candle is closed behind Moving Average, then look at the three center lines showing what lot volume should be used if the fifth dot crossed the line 25%. The candle is closed behind Moving Average, and then we open a trade with the lot: = (Let's apply the lot of, say, (0.40), divide it into four parts and open a quarter of the lot (0.10)). If the fifth dot crossed the line 100% (1-3) and the candle closes behind Moving Average, we open a deal with a lot: = (total volume 0.40). The deal remains open till the price reaches the line 1-4. Please note that sometimes the price does not reach the line. Trailing stop is recommended.

\r\n

Tips on using the indicator in the strategy tester

\r\n

In the strategy tester: the indicator is constantly re-built when detecting a new wave or the line is broken (\"1 - 4 , 1 - 3 or lower\\higher\" = customizable).
On a real or demo account: the indicator is re-built when clicking (Restart (Wolf Waves) or the the line is broken (\"1 - 4 , 1 - 3 or lower\\higher\" = customizable).

\r\n

Notes: entry points are displayed on the screenshots.

\r\n

Parameters

\r\n

MaxHistoryBars - amount of history bars to be checked.
Depth - minimum amount of candles, at which the indicator cannot build the second maximum/minimum if the first parameter conditions are suitable for construction.
Deviation - minimum values of the amount of points between Highs and Lows of the two adjacent candles suitable for the indicator to form a local peak or bottom.
Backstep - minimum amount of candles between local Lows and Highs. Changing the parameter affects the indicators' sensitivity. If we reduce the data for the system calculation, the amount of extremums is increased.
On what number bars move line, (0 = zero bar) - amount of candles, by which the lines are moved (if 0 = zero bar).
width (Wolfe Waves), (0 = automatic settings) - width (Wolfe waves) (if 0, automatic adjustment).
show Wolfe Waves: if signal falls under selected (%) - draw Wolfe waves: if the signal falls within selected ones (%).
Select signal - define the waves. The higher the percentage, the more strict conditions for the determination of the wave.
if (Wolfe Waves) not finds wait N bars, then continue search - if Wolfe waves are not found, wait for N candles and then continue the search.
timeout N bars - timeout of N candles.
SETTINGS FOR BREAKDOWN (WOLFE WAVES) - breakthrough settings (Wolfe waves).
number bars closed for line. (1 - 3) or more, for adjustment (Wolfe Waves) - amount of candles closed behind the line. 1-3 or 2-4 for restructuring the Wolfe waves.
(true = closed bars on direction trend) , (false = just closed bars for line) - true = close candles in the direction of a trend, false = close the candles behind the line.
Select closing - select closing.
number bars (0 = Off.) - amount of candles (0 = disabled).
number bars closed for line. (1 - 4), for adjustment (Wolfe Waves) - amount of candles closed behind the line (1-4) for restructuring the Wolfe waves.
(true = closed bars on direction trend), (false = just closed bars for line) - true = close candles in the direction of a trend, false = close the candles behind the line.
Select closing - select closing.
number bars (0 = Off.) - amount of closed candles (0 = disabled).
OPTIONS FOR SHOWING OFF (WOLFE WAVES) - Wolfe waves drawing parameters.
show Wolfe Waves: if line 1-3 or more, was broken, and closed less N bars - display the Wolfe wave: if the line 1-3 or 2-4 was broken and less than N candles were closed.
(true = closed bars on direction trend), (false = just closed bars for line) - true = close candles in the direction of a trend, false = close the candles behind the line.
Select closing - select closing.
number bars closed for line, for depiction (0 = Off) - amount of candles closed behind the line for drawing the Wolfe waves (0 = disabled).
setting notice when the emergence of Wolfe wave - set the notification of the Wolfe waves occurrence.
alert - enable/disable the alert (message on the screen).
sound signal - enable an audio signal.
name sound signal - audio signal name.
email - enable/disable the email alert.

\r\n

Good luck!

", "url": "https://www.mql5.com/en/market/product/13033", "small_icon": "https://c.mql5.com/31/89/wolfe-waves-modified-for-mql5-logo-60x60-6488.png", "middle_icon": "https://c.mql5.com/31/446/wolfe-waves-modified-for-mql5-logo-140x140-6476.png", "icon": "https://c.mql5.com/31/89/wolfe-waves-modified-for-mql5-logo-200x200-5611.png", "rating": 0, "price": 30, "published": 1448876869, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12977, "title": "Info about candles", "description": "

'Info body and shadow candles' indicator colors the candle bodies and shadows according to the settings. For example, if the 'Size body candles' parameter is 10, the indicator looks for the candles having a body size of 10 or more. Candle shadows are calculated the same way. Detected candles can be colored (body color, shadow color). The indicator can be adjusted for both four- and five-digit quotes.

МetaТrader 4 version: https://www.mql5.com/en/market/product/12618

Parameters

Use candle search from Maximum to Minimum - Use candle search from Maximum to Minimum
Size Maximum to Minimum Candle in Points - Size Maximum to Minimum Candle in Points
Enable coloring shadow candles - enable coloring candle shadows.
Size shadow candles - candle shadow size.
Enable coloring body candles - enable coloring candle bodies.
Size body candles - candle body size.
Color shadow candles - candle shadow color.
Color body candles - candle body color.
Setting points for 4-x or 5-x quotes - True = auto adjustment to four- and five-digit quotes/False = manual adjustment.

", "url": "https://www.mql5.com/en/market/product/12977", "small_icon": "https://c.mql5.com/31/88/info-about-candles-logo-60x60-2275.png", "middle_icon": "https://c.mql5.com/31/444/info-about-candles-logo-140x140-9529.png", "icon": "https://c.mql5.com/31/88/info-about-candles-logo-200x200-9554.png", "rating": 0, "price": 30, "published": 1448455336, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12871, "title": "Candle Pips MT5", "description": "

The \"Candle Pips MT5\" indicator is a tool that helps us a quick way to see the size of the candles on our platform; this is not only of great help to any trader who wants to study the market thoroughly, it is helpful in various strategies that are based on size of the candles.

The indicator shows the value in Pips of each candle to our current graph, rounded to an integer.
The indicator also shows the information as a histogram, at the bottom of the graph.

It has simple inputs:

Candle Type: this entry allows you to select which part of the Candle we want to measure. If you select \"High__Low\" will give us the full value of the candle, the distance between the maximum and minimum of each of the candles. If you select \"Open__Close\" We give only the value of the candle body, excluding the Wicks.
Color_Values: in this entry, change the color with which the measurement result of each candle will be shown, in this way do not have to change your template.
Distance_of_Price: from here you can configure the distance of the result that shows the size of the Candle, with respect to the high of the same.
Decimal: This option select whether or not to (True, False), see the measurement result to an integer digit, approximate, or see the most actual result, with the decimal digit.
Pos: With this option we allow the setting of a second indicator \"Candle Pips\" in the same graph, and thus see the 2 options price \"High__Low\" and \"Open__Close\", the default is 0, the setting of a new indicator it should have as value 1.
Measure: It allows us to choose if the information shown is in pips or points
Font_Size: It allows to adjust the size of the letter, of the information shown
Minimum Points: Allows you to adjust the size of the displayed candles, 0 is the same as showing all the candles
Alerts ?: With this option we alert that the current candle has reached the minimum pips
Button Show/Hide: with this option we select IF we want or NOT (True, False), show the numerical information above the candles

", "url": "https://www.mql5.com/en/market/product/12871", "small_icon": "https://c.mql5.com/31/87/candle-pips-mt5-logo-60x60-2332.png", "middle_icon": "https://c.mql5.com/31/439/candle-pips-mt5-logo-140x140-8129.png", "icon": "https://c.mql5.com/31/87/candle-pips-mt5-logo-200x200-6047.png", "rating": 5, "price": 30, "published": 1447861800, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 12782, "title": "Price Break MT5", "description": "

The \"Price Break\" indicator is a powerful tool for any trader. If the price breaks the levels the indicator shows, there is aproximatelly a 77% chance it will go in the same direction.

\r\n

If it exceeds the blue line, there are many possibilities for the price to rise. On the contrary, if it passes down the red line, it means that there are many possibilities for the price to drop.

\r\n

We should always consider the latest indicator signal, so we should rely only on the last blue arrow and the last red arrow.

\r\n

The indicator has only one input.

\r\n

Indicator parameters

\r\n

SPACES: increasing this value, the input is more refined, but of course, it will have less signals, by default, you should use the value 3.

\r\n

The strategy is to place a pending order in each of these levels, and update whenever the indicator generates a new signal (arrow). When the indicator is shown on the very price, a pending order cannot be set. Execute the purchase or sale immediately.

", "url": "https://www.mql5.com/en/market/product/12782", "small_icon": "https://c.mql5.com/31/87/price-break-mt5-logo-60x60-3861.png", "middle_icon": "https://c.mql5.com/31/440/price-break-mt5-logo-140x140-3975.png", "icon": "https://c.mql5.com/31/87/price-break-mt5-logo-200x200-6424.png", "rating": 0, "price": 30, "published": 1447666380, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12633, "title": "XCalper TFO", "description": "

This oscillator was developed exclusively by xCalper in 2015 based on moving averages calculations to indicate and try predicting oversold and overbought levels.

\r\n

The fast line (white, by default) oscillates basically between values -0.5 (oversold) and +0.5 (overbought). Whenever this line crosses upward value -0.5, it means an oversold price level. When it crosses downward value +0.5, it means an overbought price level. When fast line crosses value 0.0 and returns, it is a strong pull-back indication.

\r\n

The slow line (yellow, by default) is a simple average of fast line with period and scale as parameters. This line has similar interpretation of the fast line for its oversold/overbought levels.

\r\n

Additionally, slow line signal (positive, above 0.0 or negative, below 0.0) can guide trade direction in conjunction with fast line.

\r\n

This oscillator is better used in sideway markets, where its optional but powerful price prediction can help traders and scalpers to enter and exit positions.

", "url": "https://www.mql5.com/en/market/product/12633", "small_icon": "https://c.mql5.com/31/86/xcalper-tfo-logo-60x60-6995.png", "middle_icon": "https://c.mql5.com/31/438/xcalper-tfo-logo-140x140-7924.png", "icon": "https://c.mql5.com/31/86/xcalper-tfo-logo-200x200-1880.png", "rating": 0, "price": 340, "published": 1447062910, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12527, "title": "Trend Trade mt5", "description": "

The Trend Trade indicator displays assumed turning points of the price on the chart in the direction of the trend after correction. It is based on the data of the Prise Reversal oscillator with the period 6 and indicators which characterize strength and availability of the trend. When the value of Prise Reversal is in overbought or oversold area (area size is set by a user), and the current trend is confirmed, the Trend Trade indicator draws an arrow pointed to the further assumed price movement.

Inputs

PR – size of overbought/oversold areas of the Prise Reversal indicator. Default value is 25. If you decrease this value, the Trend Trade indicator will generate less signals but they will be more accurate. And vice versa for increasing.
Trend – percentage of the price change on the last periods. Default value is 0.03. Value increase leads to decreasing the number of signals, but it also means that signals will be generated in points with exceptionally sharp movement.
Alert – you can set an alert when a signal appears. True – display alert, False – no alert. Default value is False.

To get correct entry points, we recommend the following:

Adjust parameters for each traded pair and timeframe;
First, get a signal on a higher timeframe (for example, H1), then wait for a similar signal on a lower timeframe (for example, M15).

", "url": "https://www.mql5.com/en/market/product/12527", "small_icon": "https://c.mql5.com/31/85/trend-trade-mt5-logo-60x60-7673.png", "middle_icon": "https://c.mql5.com/31/445/trend-trade-mt5-logo-140x140-4878.png", "icon": "https://c.mql5.com/31/85/trend-trade-mt5-logo-200x200-7284.png", "rating": 0, "price": 43.9, "published": 1446114984, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12493, "title": "Turning point of price mt5", "description": "

The Turning point of price indicator displays assumed turning points of the price on the chart. It is based on data of the Prise Reversal oscillator and standard ADX. When the value of Prise Reversal is in overbought or oversold area (area size is set by a user), and the value of the ADX main line exceeds the preset value, the Turning point of price indicator draws an arrow pointed to the further assumed price movement. This idea is described in the article Indicator of Price Reversal.

Inputs

PR – size of overbought/oversold areas of the Prise Reversal indicator. Default value is 20. If you decrease this value, the Turning point of price indicator will generate less signals but they will be more accurate. And vice versa for increasing.
ADX – value of the ADX main line, above which a signal is generated. Default value is 45. Value increase leads to decreasing the number of signals though they become more accurate. And vice versa for decreasing.
Alert – you can set an alert when a signal appears. True – display alert, False – no alert. Default value is False.

To get correct entry points, we recommend the following:

Adjust parameters for each traded pair and timeframe;
First, get a signal on a higher timeframe (for example, H1), then wait for a similar signal on a lower timeframe (for example, M15).

", "url": "https://www.mql5.com/en/market/product/12493", "small_icon": "https://c.mql5.com/31/85/turning-point-of-price-mt5-logo-60x60-3406.png", "middle_icon": "https://c.mql5.com/31/447/turning-point-of-price-mt5-logo-140x140-8685.png", "icon": "https://c.mql5.com/31/85/turning-point-of-price-mt5-logo-200x200-2231.png", "rating": 0, "price": 39.99, "published": 1445952208, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12412, "title": "ZigZag Medvedev for MQL5", "description": "

The indicator is similar to https://www.mql5.com/en/market/product/12330. However, it considers the MQL5 platform features.

\r\n

Peaks and bottoms are calculated based solely on external bars. After a swing is formed, the indicator does not redraw providing opportunities for traders working on horizontal level breakthroughs. Traffic can be reduced by changing the amount of calculated bars in the MinBars variable (default value is 500). All you need is to select the output options, so that you can see the market \"texture\".

\r\n

Constructive suggestions and feedback are highly appreciated.

", "url": "https://www.mql5.com/en/market/product/12412", "small_icon": "https://c.mql5.com/31/1287/zigzag-medvedev-for-mql5-logo-60x60-4307.png", "middle_icon": "https://c.mql5.com/31/1287/zigzag-medvedev-for-mql5-logo-140x140-9058.png", "icon": "https://c.mql5.com/31/1287/zigzag-medvedev-for-mql5-logo-200x200-5749.png", "rating": 0, "price": 50, "published": 1445611086, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12447, "title": "ZigZag Medvedev Close for MQL5", "description": "

The indicator is based on the two-buffer scheme and does not require any additional settings. It can be used on any financial instrument without any restrictions. The indicator is a known ZigZag, but it does not redraw. The indicator allows to easily detect significant levels on the price chart, as well as demonstrates the ability to determine the probable direction of a price movement. The calculations are based on the candles' Close prices, thus improving the reliability of the levels.

\r\n

Parameter

\r\n

MinBars – amount of calculated bars, the default is 500. If 0, calculation is performed on the entire available history.

\r\n

Constructive suggestions and feedback are highly appreciated.

", "url": "https://www.mql5.com/en/market/product/12447", "small_icon": "https://c.mql5.com/31/1035/zigzag-medvedev-close-for-mql5-logo-60x60-7561.png", "middle_icon": "https://c.mql5.com/31/1035/zigzag-medvedev-close-for-mql5-logo-140x140-5327.png", "icon": "https://c.mql5.com/31/1035/zigzag-medvedev-close-for-mql5-logo-200x200-7511.png", "rating": 0, "price": 45, "published": 1445611081, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12405, "title": "Bober Real MT5", "description": "

Bober Real MT5 is a fully automatic Forex trading Expert Advisor. This robot was made in 2014 year and did a lot of profitbale trades during this period. So far over 7000% growth on my personal account. There was many updates but 2019 update is the best one. The robot can run on any instrument, but the results are better with EURGBP, GBPUSD, on the M5 timeframe. Robot doesn't show good results in tester or live account if you run incorrect sets. Set files for Live accounts availible only for customers.

Join channel: boberreal

⚙️ Main Advantages

No martingale, hedging, or averaging — always uses SL and TP.
High speed tester run and optimization.
Optional Dynamic Take-Profit adapts to channel highs/lows.
Built-in news calendar filter for avoiding high-impact events works fully automated.
GMT offset fully automated.
Optimized for live execution and stable results over years of updates.
Setup and forget.

📋 Parameters

Core / Trading

type_order — Order filling type (default: ORDER_FILLING_FOK ).

ReverseTrade — Reverse trade direction.

ToolEnter — Entry tool (RSI or None).

RSI304 / NoRSIbars — RSI period and number of bars.

MagicNumber — Unique ID for orders.

ATRperiod1 / ATRperiod2 — ATR range filter periods.

ATR_from / ATR_to — ATR filter range for entry conditions.

indicatorTF — Timeframe for indicator calculations.

Lot Management

Inp_Lot — Lot type ( Fixed or Percent ).

Risk / Lot — Risk percent or fixed lot size.

StopLoss / TakeProfit — Static SL/TP (in points).

VirtStopLoss / VirtTakeProfit — Virtual SL/TP.

Slippage / MaxSpread — Maximum allowed trade conditions.

Distance / MaxOrders / MaxOrders2 — Order spacing and limits.

CloseUsingBidForSellTP — Close sell positions using Bid price for precision.

Dynamic Take-Profit

UseDynamicTP — Enable adaptive TP calculation.

ChannelBars — Lookback bars for channel detection.

DynTP_Speed — Adjustment speed of dynamic TP.

Time Filter

Servertimefilter / AutoGMT — Auto-detect broker time or use manual.

StartHour / StartMinute / StopHour / StopMinute — Daily trading window.

Calendar Filter

UseCalendar — Skip sessions during major news.

NewsLogs — Show detailed log entries for news filtering.

NewsDecisionOffsetHours — Adjust time window for filtering.MinNewsImpact — Filter events by importance level.

🧠 Trading Style

Suitable for calm, high-liquidity market hours.
Designed for stability, not overtrading.
Recommended pairs: GBPUSD, EURGBP, EURUSD.
Works best on M2 or M5 timeframe with VPS hosting.

If you have bought the product and/or you have any questions send me a private message. Also contact me for product support if you have purchased it.

", "url": "https://www.mql5.com/en/market/product/12405", "small_icon": "https://c.mql5.com/31/84/bober-real-mt5-logo-60x60-6753.png", "middle_icon": "https://c.mql5.com/31/445/bober-real-mt5-logo-140x140-3294.png", "icon": "https://c.mql5.com/31/84/bober-real-mt5-logo-200x200-8889.png", "rating": 4.764705657958984, "price": 700, "published": 1445607563, "popularity": 0, "category": "Expert", "votes": 17 }, { "id": 12434, "title": "Prise Reversal mt5", "description": "

The oscillator uses data of standard indicators and some patterns of price movement. Using this data, it forms its own (more accurate) signals of a change in the direction of the price movement. Prise Reversal helps to identify reversal points during the flat, and the price extremums during the trend. At these points, you can enter counter trend with a short take profit. Besides, it indicates time intervals when it is too late to open a trend-following deal. After a few days of using the indicator, it will become an integral part of your trading system.

Indicator Input Parameters:

Period – period of the indicator. Default-14.

To get correct entry points we recommend the following:

Adjust parameters for each traded pair and timeframe;
First, get a signal on a higher timeframe (for example, H1), then wait for a similar signal on a lower timeframe (for example, M15).
Use values of indicator only more 77-80 and less 23-20.

", "url": "https://www.mql5.com/en/market/product/12434", "small_icon": "https://c.mql5.com/31/84/prise-reversal-mt5-logo-60x60-3618.png", "middle_icon": "https://c.mql5.com/31/445/prise-reversal-mt5-logo-140x140-1047.png", "icon": "https://c.mql5.com/31/84/prise-reversal-mt5-logo-200x200-4305.png", "rating": 0, "price": 35.99, "published": 1445433086, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 12288, "title": "VR Ticks MT5", "description": "

VR Ticks is a special indicator for scalping-based strategies. Thanks to this indicator, the trader can see the tick chart directly on the main chart of the financial instrument. A tick chart allows you to enter a position into the market or close a position in the market as accurately as possible. VR Ticks plots tick data in the form of lines that change color depending on the direction - this allows you to visually understand and assess the situation on ticks. The advantage of tick charts is that they do not take into account time frames and are built based on price changes. VR Ticks builds the most minimal chart possible.

Settings, set files, demo versions, instructions, problem solving, can be found in [blog]
You can read or write reviews at [link]
Version for [MetaTrader 4]

A tick is one price movement. For one price movement, the price can change by one or several points. It is important to understand that a tick is a movement .

The indicator displays the Ask and Bid prices at the bottom right, as well as the current spread value. The program code of the indicator, tick by tick, builds a chart in the MetaTrader window. Depending on the indicator settings, moments of growth in the chart can be painted in one color, and moments of falling prices in another. This approach helps the trader to clearly see a change in the current trend. The indicator monitors every price movement and displays all, absolutely all price movements on the chart. If there are no changes in the Ask or Bid price, the indicator builds a horizontal chart.

Advantages

Greater efficiency when trading using scalper strategies.
Stable and optimized indicator code, does not consume a lot of computer resources.
The tick chart can be displayed in the window with the main chart.
It is possible to configure the chart window to only monitor the tick chart.
The indicator is designed and identical for MetaTrader 4 and MetaTrader 5.
Suitable for trading by beginners and experienced traders.
Can show data for any financial instruments (Forex, Metalls, CFD, Futures, Crypto).

VR Ticks indicator settings

Indicator settings

Count periods - Number of periods to draw
Delta Ask - Bid - Delta for spreading the Ask and Bid lines

Ask line settings

Show Ask tick - show the Ask line
Color Ask tick Up - color of the Ask line when growing
Color Ask tick Down - color of the Ask line when falling
Width Ask tick - thickness of the Ask line
Style Ask tick - Ask line style

Bid line settings

Show Bid tick - show the Bid line
Color Bid tick Up - color of the Bid line when growing
Color Bid tick Down - color of the Bid line when falling
Width Bid tick - thickness of the Bid line
Style Bid tick - Bid line style

Last line settings

Show Last tick - show the Last line
Color Last tick Up - color of the Last line when growing
Color Last tick Down - color of the Last line when falling
Width Last tick - Last line width
Style Last tick - Last line style

Other Settings

Shift indicator bar - shift the indicator forward/backward by the specified number of bars
Shift indicator price - shift the indicator up/down by the specified number of points
Text Size - text size

", "url": "https://www.mql5.com/en/market/product/12288", "small_icon": "https://c.mql5.com/31/1068/vr-ticks-mt5-logo-60x60-5637.png", "middle_icon": "https://c.mql5.com/31/1068/vr-ticks-mt5-logo-140x140-2820.png", "icon": "https://c.mql5.com/31/1068/vr-ticks-mt5-logo-200x200-6286.png", "rating": 4.333333492279053, "price": 0, "published": 1444906416, "popularity": 2.8031353322746706, "category": "Indicator", "votes": 3 }, { "id": 12297, "title": "Price Statistics MT5", "description": "

This indicator works only 5 digits Brokers.

\r\n

It is impossible to talk about the study of the Forex market or any market without considering of that market statistics.

\r\n

In this case, our indicator \"price statistics\" we have a new way to study our chart, giving information of the price in a range of pips you want to study for example, can we know how many times the price closes or opens into spaces 10, 20, 30, 50, 100 pips or more; and know them not only in numbers but also draws this relationship and makes the right side of our window of METATRADER 5 a graphic bar displays that information in an easy and immediate way to assimilate.

\r\n

Although the information is updated with every tick, we can update it at any time after this loaded indicator in our graph, pressing the \"refresh\" button indicator.

\r\n

We can select the number of candles that are going to study or simply to a very high number, select all the graphic candles.

\r\n

It's a great tool for the study CORRECT market.

\r\n

The price is very low, will go up without warning, so take advantage.

\r\n

Inputs:

\r\n

Applied Price: This is the value we count, to show in the selected ranges Pips. We select \"CLOSE\" to count all the candles with closures that range of X pips, or we select \"OPEN\" to count all the candles opened in the range of X pips, or select \"LOW\" for the amount of times candles had a low price in a range of X pips, ETC
PIPS: here you can select the amount of pips to draw the range (the width of each bar to the right). ideally a number greater than 20 pips to work on TF greater than 30 minutes.
Candles_to_study: here we select the number of candles we want to process, we can study and get the statistics for all the candles (with a very high number) or the last 500, 1000, 1500, or any number of candles.

\r\n

Watch video on the operation of the indicator

", "url": "https://www.mql5.com/en/market/product/12297", "small_icon": "https://c.mql5.com/31/83/price-statistics-mt5-logo-60x60-3808.png", "middle_icon": "https://c.mql5.com/31/444/price-statistics-mt5-logo-140x140-4273.png", "icon": "https://c.mql5.com/31/83/price-statistics-mt5-logo-200x200-6874.png", "rating": 0, "price": 30, "published": 1444903647, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 11990, "title": "BuyLimit and SellLimit MQ5 buttons", "description": "

BuyLimit and SellLimit Buttons opens any combination of Buy Limit and Sell Limit pending orders and closes all existing pending orders.

\r\n

Inputs

\r\n

Before placing all pending orders, the input window is opened allowing you to modify all input parameters:

\r\n

DeleteAllPendings; if true, all pending orders (for the current currency) can be deleted.
BuyLimit; if true, Buy Stop orders can be opened.
SellLimit; if true, Sell Stop orders can be opened.
InitLot; initial lot size.
LotCoeff; next lot size is increased/decreased by the coefficient.
InitStep; number of points between the first two pending orders.
StepCoeff; next step is increased/decreased by the coefficient.
NumOfOrders; number of pending orders.

\r\n

Attention

\r\n

You have to allow automated trading on the Expert Advisors tab (Tools->Options).

", "url": "https://www.mql5.com/en/market/product/11990", "small_icon": "https://c.mql5.com/31/81/buylimit-and-selllimit-mq5-buttons-logo-60x60-4528.png", "middle_icon": "https://c.mql5.com/31/445/buylimit-and-selllimit-mq5-buttons-logo-140x140-4806.png", "icon": "https://c.mql5.com/31/81/buylimit-and-selllimit-mq5-buttons-logo-200x200-5441.png", "rating": 0, "price": 50, "published": 1443799562, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 12011, "title": "BoxProfile MT5", "description": "

The indicator displays volume profiles based on the nesting principle.

Profiles periods are pre-set so that each subsequent profile has a length twice as long as the length of the previous profile.

In addition to profiles, the indicator displays volume clusters sorted by color, depending on the volume they contain.

Indicator operation features

The indicator works on typical timeframes from M5 to MN, but for calculations uses historical data from smaller timeframes:

M1 - for timeframes from M5 to H1,
M5 - for timeframe H4,
M30 - for timeframe D1,
H4 - for timeframe W1,
D1 - for timeframe MN.

A full recalculation the indicator performs: when the chart scale changes, when the chart scrolls, when the timeframe is switched, and when a new candle appears.

Input variables

ProfileStepPoint - fixed clustering step along the price axis, set in \"old\" points, i.e. the value 0.1 corresponds to one \"new\" point.
ProfileStepPointPix - dynamic clustering step along the price axis, set in pixels of the monitor.
ProfilePriceArea - size of the value area.
ProfileAreaMode - method for calculating the value area :

OfPocND - distribution relative to the POC level.
OfTotalVolume - distribution relative of the volume traded in the profile.

BoxStepPoint - similar to ProfileStepPoint, but for volume clusters.
BoxStepPointPix - similar to ProfileStepPointPix, but for volume clusters.
BoxExcessRemove - function hides unnecessary clusters, leaving only the most important ones to be displayed.
BoxDensity - function enables cluster calculation mode as volume concentration per unit of time.
VolumesType - type of volumes used in calculations:

Tick - tick volumes.
Real - real volumes, if broadcast from the broker.
Without - without volumes (volumes are emulated using the TPO principle).

LowestBoxColor, LowBoxColor, MiddleBoxColor, MediumBoxColor, HighBoxColor, HighestBoxColor - group of variables that determine the color of clusters, depending on the volume value.

The other input variables are related to other settings, and their purpose is clear from their names.

", "url": "https://www.mql5.com/en/market/product/12011", "small_icon": "https://c.mql5.com/31/81/boxprofile-mt5-logo-60x60-1394.png", "middle_icon": "https://c.mql5.com/31/441/boxprofile-mt5-logo-140x140-7728.png", "icon": "https://c.mql5.com/31/81/boxprofile-mt5-logo-200x200-9453.png", "rating": 4.599999904632568, "price": 0, "published": 1443614137, "popularity": 2.9378982533883558, "category": "Indicator", "votes": 10 }, { "id": 11941, "title": "Normalized OBV", "description": "

When looking at the information of On Balance Volume indicator, a question arises: is it a strong or weak movement? Should it be compared with previous days? These data should be normalized to always have a reference.

\r\n

This indicator presents the followings parameters:

\r\n

Normalization period (Max-Mins absolute)
Smoothing period (-1 off)
Tick/Real Volume
Maximum number of bars to calculate (-1 off)
Upper value normalization
Lower value normalization

\r\n

Calculation: normOBV = (value - absMin) * (relMax - relMin) / (absMax - absMin) + relMin

", "url": "https://www.mql5.com/en/market/product/11941", "small_icon": "https://c.mql5.com/31/80/normalized-obv-logo-60x60-5648.png", "middle_icon": "https://c.mql5.com/31/439/normalized-obv-logo-140x140-8928.png", "icon": "https://c.mql5.com/31/80/normalized-obv-logo-200x200-5115.png", "rating": 0, "price": 30, "published": 1443099752, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 11953, "title": "Exp COPYLOT CLIENT for MT5", "description": "

Trade copier for MT5 is a trade copier for the МetaТrader 5 platform.

It copies forex trades between any accounts MT5 - MT5, MT4 - MT5 for the COPYLOT MT5 version (or MT4 - MT4 MT5 - MT4 for the COPYLOT MT4 version)

Reliable copier!

	MT4 version	Full Description +DEMO +PDF	How To Buy	How To Install	How to get Log Files	How To Test and Optimize	All products from Expforex

You can also copy trades in the МТ4 terminal (МТ4 - МТ4, МТ5 - МТ4): COPYLOT CLIENT for MT4

This version Including copy between terminals МТ5 - МТ5, МТ4 - МТ5.

The deals copier is created to copy deals/positions between 2/3/10 terminals.
Copying from a demo account and investment accounts is supported.
The program can be run on multiple terminals.
Use this synchronizer of your trades on various investor accounts trading on one account - COPYLOT will copy your trades to other terminals.
Copy from multiple terminals to one;
Copy from one terminal to several others;
Copy from any different brokers to any different brokers;
Copy from a closed account opened with an Invest password;
Copy from DEMO accounts to a REAL account;
Hedge and netting accounts.

Setup

COPYLOT CLIENT (Slave) Install the Expert Advisor in the terminal where you want to copy trades.
Install the Expert Advisor in the terminal MetaTrader 5, where you want to copy trades.
Open the terminal on which Positions will be copied and set COPYLOT CLIENT to one chart
Specify any text label name as pathRead, for example, \"COPY\". This should match the master terminal PathWrite (to bind the two terminals).
The EA needs to be set to 1 Chart! By default, our adviser copies all positions from your account!

Links

To copy trades, you need to install the free Master copier in the terminal from where you want to copy the trades: COPYLOT Master for MT4 or COPYLOT Master for MT5.
Attention: To duplicate positions on your account you can download our duplicator of positions Exp5 Duplicator for MT5

Attention for MT5

Partial close is not supported! Orders can be closed only in the same lots as they were opened! If your master uses different lots for closing, then the copier may fail!

INOUT not supported. Orders are copied upon activation (Positions) and are copied to the client account. You can activate this function PendingOrdersCopy Only for HEDGE accounts.

COPYLOT does not copy via the Internet! Copy between terminals on one computer!

COPYLOT does not work on MetaQuotes VPS

#tags Copy, Копировщик, copy trades, copy trade, copier, copy, trades, fast copy, kopir , Expforex, Vladon,

Client Settings: Where will the signals be copied

pathREAD/pathWrite: Path to the file where information about current positions is stored. No spaces or special characters allowed.

Magic: Magic number used to identify positions or trades, particularly for using the system on multiple master terminals.

PreFixSymbol: Suffix of the client’s currency pair symbols. Automatically detects the suffix for copying trades if set to \"Auto\".

ChangingNamesSymbols: Parameter to replace symbol names between master and client terminals if the symbols don’t match.

Sounds: Enables sound notifications when new trades are opened on the client terminal.

Comentshow: Displays a table of copied trades on the client chart.

TypeFilling (Only for MT5): Defines the order fill type for MT5. Can be set to automatic or manually adjusted if needed.

NumberTryClose/NumberTryOpen: Number of attempts to close or open positions if errors occur.

Slippage: Allowed slippage when opening positions. If set to 0, it will automatically adjust based on the spread.

PricePointSlip: Limits the maximum price difference between master and client when copying positions.

LotRiskFromMaster: Copies risk settings from the master terminal and adjusts the lot size proportionally to the client’s balance.

LotExp: Multiplier to increase or decrease the lot size when copying from the master.

Lot: Defines a fixed lot size for opening trades on the client terminal.

RiskLot: Percentage for dynamic lot calculation. If 0, the fixed lot is used instead.

RiskLotType: Type of risk calculation for dynamic lot sizing (based on free margin, balance, or stop-loss).

RiskRate: Exchange rate of your account currency to USD. Automatically calculated if set to 0.

KoefLot: Coefficient for adjusting the lot size when copying trades, based on the master’s lot size.

AdditionalLot: Adds an additional fixed amount to the lot size when copying trades.

MinLott/MaxLott: Minimum and maximum lot sizes for opening positions on the client terminal.

TakeProfitCopy/StopLossCopy: Copies the take profit and stop loss levels from the master to the client.

CorrectSLTPbyMaster: Adjusts the stop-loss and take-profit levels if the client’s opening price differs from the master’s.

MarketWatch: For ECN brokers, allows opening positions first and modifying stop-loss and take-profit levels afterward.

ReverseCopy: Reverses trades when copying (master BUY becomes client SELL and vice versa).

PendingOrdersCopy: Enables or disables copying of pending orders from the master terminal.

DayToExpiration (Only for MT5): Sets the expiration time for pending orders (in days).

PositionsCopy: Enables or disables the copying of positions from the master terminal.

PricePointSlip: Sets a limit on the price difference between master and client when copying trades.

TimeSecondSlip: Maximum allowed time difference (in seconds) between the master and client when opening trades.

DeleteOrderbyMaster: Deletes pending orders on the client when they are deleted on the master terminal.

ReopenPosAfterClose: Reopens positions on the client if they are closed on the master terminal.

Rounding: Rounds prices when opening or modifying orders (up to 1 or 2 decimal places).

AutoRoundingGOLDSILVER: Automatically rounds prices for gold and silver when opening positions.

ProfitCopyOnly: Copies only profitable trades if the profit exceeds a set number of pips.

OnlyProfitPips: Minimum profit in pips required to copy a trade.

LossCopyOnly: Copies only losing trades if the loss exceeds a set number of pips.

OnlyLossPips: Minimum loss in pips required to copy a losing trade.

NewTradeONLY: Copies only new trades that are opened after the client copylot is started.

FilterLotMin/FilterLotMax: Minimum and maximum lot sizes that will be copied from the master terminal.

SymbolToCopy: Specifies which symbols (currency pairs) to copy. Leave blank to copy all symbols.

SymbolNotToCopy: Specifies which symbols not to copy. Leave blank to allow all symbols.

SLEEPING: Delay in milliseconds between code execution steps. Smaller values speed up copying but increase resource usage.

ClosePosbyMaster: Closes positions on the client if they are closed on the master terminal.

TP_adjust/SL_adjust: Adjusts the take-profit and stop-loss levels on the client relative to the master.

My_STOPLOSS/My_TAKEPROFIT: Custom stop-loss and take-profit settings on the client, independent of the master terminal.

TrailingStopUSE: Enables trailing stop functionality for copied positions.

IfProfTrail: Trailing stop starts only after the position has reached breakeven.

Trailingstop: Distance in pips from the current price to the stop-loss when using a trailing stop.

TrailingStep: Step size for modifying the stop-loss with the trailing stop.

Breakeven: Sets the stop-loss to breakeven after a certain amount of profit is reached.

MaxPosBySymbol/MaxOrderBySymbol/MaxSymboll: Limits the maximum number of positions, pending orders, and symbols that can be copied.

NumberPosbeforeCopy: Defines the minimum number of positions on the master terminal before copying begins.

TPWCM_Use: Enables special SL/TP settings after the master position is closed.

TPWCM_TakeProfitWhenCloseMaster: Sets a take-profit on the client after the master position is closed.

TPWCM_TakeProfitOnlyToProfitZone: Only sets the take-profit in the profit zone after the master position is closed.

TPWCM_StopLossWhenCloseMaster: Sets a stop-loss on the client after the master position is closed.

TPWCM_TrailingStopUSE: Enables a trailing stop only after the master position is closed.

TPWCM_IfProfTrail: Trailing stop works only when the client position is already in profit.

TPWCM_BreakEven: Sets a breakeven stop-loss after the master position is closed.

OIP_Order_Instead_Position: Converts trades into pending orders on the client terminal instead of copying positions.

OIP_TypeOrders: Specifies whether the pending order is a stop or limit order.

OIP_DistanceOIP: Distance in points for the pending orders.

Clients extra Delays: Adds delays when copying trades from the master terminal to the client, either in seconds or points.

Delay_Seconds_General: Sets a general delay between adviser requests to the server (opening, closing, modifying trades).

", "url": "https://www.mql5.com/en/market/product/11953", "small_icon": "https://c.mql5.com/31/1726/exp-copylot-client-for-mt5-logo-60x60-6220.png", "middle_icon": "https://c.mql5.com/31/1726/exp-copylot-client-for-mt5-logo-140x140-9091.png", "icon": "https://c.mql5.com/31/1726/exp-copylot-client-for-mt5-logo-200x200-7749.png", "rating": 3.8235294818878174, "price": 75, "published": 1443022501, "popularity": 401.6669061006138, "category": "Utility", "votes": 34 }, { "id": 11796, "title": "BoxChart MT5", "description": "

The market is unfair if only because 10% of participants manage 90% of funds. An ordinary trader has slim changes to stand against these \"vultures\". This problem can be solved. You just need to be among these 10%, learn to predict their intentions and move with them.

Volume is the only preemptive factor that faultlessly works on any timeframe and symbol. First, the volume appears and is accumulated, and only then the price moves. The price moves from one volume to another. Areas of volume accumulation form reliable support/resistance levels and are regularly \"tested\" by the price providing the best market entry opportunity. The method of trading using this indicator comes down to trading from one strong area to another.

Indicator operation principle

The BoxChart indicator calculates volume clusters, sorts them according to their completeness and marks them in appropriate colors. In addition, the indicator sums all clusters and displays the result on the price axis as a horizontal volume scale (the market profile).

The indicator works on all timeframes available in the terminal, but uses historical data of smaller periods (relative to the current one) M1, M5, H1, H4 and D1 for calculations. Before launching the indicator, download the history of these timeframes by scrolling the chart to the left. If there are no data, the indicator displays the appropriate message and perform drawings only where the data are available.

The indicator performs all drawings only in the chart view area but you can scroll the chart to the history. The clusters may \"blink\" when scrolling the chart. This is a normal behavior since they are being re-sorted.

Clusters having the same color but different length (within a single price line) are approximately similar by their volume.

Indicator buttons

BSP – increase/decrease a fixed step of a price grid. Set in \"old\" points. If 0, the calculation step is taken from the parameter set by the BSPP button.
BSPP - increase/decrease a dynamic step of a price grid. Set in monitor pixels.
PV – enable/disable the volume profile.
PL – volume profile to the left/right.
BD - in this mode, each cluster contains the volume concentration rather than the volume itself. The cluster volume may be relatively small or even imperceptible, but its high concentration per time unit indicates high activity on this candle (candles) and on the given price level.
OI - enable/disable the open interest mode obtained mathematically by consecutive zeroing of mutually absorbing volumes. Only the volumes unaffected by the operation are left to be displayed in the clusters and the profile.
NM – enable/disable the mode of line-by-line splicing of adjacent clusters.
VT – volume scale:

VT – tick volumes
VR – real volumes
VN – without volumes (volumes are emulated according to the TPO principle).

BV – enable/disable period frames.
RS – reset to default settings.

Inputs

DigitsFontSize – font size of labels on clusters.
BordersFontSize – font size of labels above the period frames.
Auto sorting of clusters is performed in increments of 1/6. As a result, we have six color graduations. The color matching of these cluster graduations can be adjusted with color variables: LowestBoxColor - up to 1/6, LowBoxColor - up to 2/6, MiddleBoxColor - up to 3/6, MediumBoxColor - up to 4/6, HighBoxColor - up to 5/6, HighestBoxColor - up to 6/6 of the maximum accumulation in the visible area.
The manual sorting of clusters is set by users via the following inputs: HighestBoxValue, HighBoxValue, MediumBoxValue, MiddleBoxValue, LowBoxValue and LowestBoxValue that set the upper cluster volume level, above which the cluster receives the appropriate color.

The remaining inputs refer to other color settings, and their purpose is clear from their name.

", "url": "https://www.mql5.com/en/market/product/11796", "small_icon": "https://c.mql5.com/31/653/boxchart-mt5-logo-60x60-3557.png", "middle_icon": "https://c.mql5.com/31/653/boxchart-mt5-logo-140x140-1151.png", "icon": "https://c.mql5.com/31/653/boxchart-mt5-logo-200x200-9517.png", "rating": 5, "price": 33, "published": 1442570744, "popularity": 1.372354881986392, "category": "Indicator", "votes": 7 }, { "id": 11817, "title": "Five Candles Pattern MT5", "description": "

The \"Five Candle Pattern\" indicator is a novel way to see the market, because with it we can compare and/or seek training or the pattern of the past 4 or 5 Candles, and identify them in the same graph, to view your behavior at an earlier time.

\r\n

The indicator creates a pattern of those 4 or 5 candles and searches backward, identifies, and marks the same formation or pattern.

\r\n

With that information you adjust the strategy that is operating, or create a new one, because you can compare the past development of the current pattern and on that basis it easier to identify the trend.

\r\n

It is an easy and immediate way to look as the graph behaved when the information was quite similar to the formation or candlestick pattern that is developing at the moment.

\r\n

Although the name emphasizes a pattern of 5 candles, the indicator can be used also by a pattern of 4 candles, just as is customizable color pattern base, the color of the pattern matches, and the number of candles to review in search of the Pattern or formation.

\r\n

It is a potential tool that will refine the strategy and which will be completely useful for traders. The indicator is accompanied by an information table which shows all the information and results of the indicator.

\r\n

Indicator parameters

\r\n

Candles_to_Compare: is the number of candles we want to review, and in which we will look for matches with the base pattern
Candles_base: select between 2 options, search for a pattern of 4 candles or a pattern of 5 candles.

", "url": "https://www.mql5.com/en/market/product/11817", "small_icon": "https://c.mql5.com/31/88/five-candles-pattern-mt5-logo-60x60-3190.png", "middle_icon": "https://c.mql5.com/31/446/five-candles-pattern-mt5-logo-140x140-5239.png", "icon": "https://c.mql5.com/31/88/five-candles-pattern-mt5-logo-200x200-7436.png", "rating": 0, "price": 30, "published": 1442404438, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 11649, "title": "Color Candles Bulls and Bears", "description": "

The indicator colors bullish, bearish and doji candles. Also, the amount of candles (bullish, bearish and doji) for the last N days is calculated. You can select colors for both bodies and shadows of candles, as well as enable coloring of only candle bodies

МetaТrader 4 version: https://www.mql5.com/en/market/product/11624

Parameters

color bulls = color of bullish candle bodies
color shadow bulls = color of bullish candle shadows
color bears = color of bearish candle bodies
color shadow bears = color of bearish candle shadows
Paint Upper Shadows = the color of the upper shadows.
Paint Lower Shadows = the color of the lower shadows.
color Doji = doji color
off color shadows candles = enable/disable coloring candle shadows
Info on the chart = enable/disable chart info
count number of candles for last.N days = calculate the amount of candles for the last N days

", "url": "https://www.mql5.com/en/market/product/11649", "small_icon": "https://c.mql5.com/31/78/color-candles-bulls-and-bears-logo-60x60-7452.png", "middle_icon": "https://c.mql5.com/31/446/color-candles-bulls-and-bears-logo-140x140-8191.png", "icon": "https://c.mql5.com/31/78/color-candles-bulls-and-bears-logo-200x200-3599.png", "rating": 0, "price": 30, "published": 1442326628, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 11660, "title": "KVM Bitcoin Price Ticker MT5", "description": "

A ticker that shows the average bitcoin price of the selected currency and keeps updating it at regular intervals.

\r\n

PRO version updates more often and displays details about the price change!

\r\n

Make sure you have added the API address http://metakod.com/mk/api in the list of allowed URLs on tab Tools → Options → Expert Advisors.

\r\n

All of the supported currencies and the API address are listed in the screenshots below.

\r\n\r\n

\r\n

Inputs

\r\n

Logging level - Controls the amount of details written to the log (default: INFO).
BTC (Bitcoin) to - Specifies the name of the selected currency (default: USD).

\r\n

Any comments or suggestions would be greatly appreciated!

", "url": "https://www.mql5.com/en/market/product/11660", "small_icon": "https://c.mql5.com/31/78/kvm-bitcoin-price-ticker-mt5-logo-60x60-5891.png", "middle_icon": "https://c.mql5.com/31/446/kvm-bitcoin-price-ticker-mt5-logo-140x140-1739.png", "icon": "https://c.mql5.com/31/78/kvm-bitcoin-price-ticker-mt5-logo-200x200-3426.png", "rating": 4, "price": 0, "published": 1441982274, "popularity": 0.2582018806093862, "category": "Utility", "votes": 1 }, { "id": 11758, "title": "Color Chart MT5", "description": "

Visualize your charts differently in MetaTrader 5.

\r\n

The product is good for comparing the prices, since the indicator draws High, Close, HLC, etc.

\r\n

It is useful when applied with other indicators (like MACD).

\r\n

This simple indicator colors the entire space below the chart allowing you to see the market with greater clarity.

\r\n

You will see the actual price, trends, and the market behavior.

\r\n

Indicator parameters

\r\n

Applied_Price: From this option you can select the type of price you want to draw with the indicator, it can be: High, Low, Open, Close, Median, Typical, Weighted.
Color: Select the fill color of the indicator
Candles: Enter the number of candles that will have the Fill Effect‌

", "url": "https://www.mql5.com/en/market/product/11758", "small_icon": "https://c.mql5.com/31/88/color-chart-mt5-logo-60x60-7035.png", "middle_icon": "https://c.mql5.com/31/446/color-chart-mt5-logo-140x140-6570.png", "icon": "https://c.mql5.com/31/88/color-chart-mt5-logo-200x200-8451.png", "rating": 0, "price": 30, "published": 1441968263, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 11458, "title": "ZigZag on average for MQL5", "description": "

This is a well-known ZigZag indicator. But it differs by the fact that its plot is based on values of the middle line which is set by a user. It can display Andrews’ Pitchfork and standard or Bobokus Fibo levels. NO REPAINTING.

\r\n\r\n

\r\n

Parameters

\r\n

Period МА — middle line period. Default value is 34. Minimum value is 4. Maximum value is set at your discretion.
Used to calculate price — type of price used for the midline calculations.
The averaging method — type of smoothing for the middle line.
Turning pitchfork — enable (true) or disable (false) Andrews’ Pitchfork.
PitchColor — Andrews’ Pitchfork color.
Inclusion levels Fibo — enable (true) or disable (false) Fibo levels.
Installing Fibo Bobokus levels — use Bobokus Fibo levels (true) ot standard Fibo levels (false).
Distance to turn Fib levels Bobokus — distance in points between spots of the last movement to visualize Bobokus Fibo levels.
Color Fibonacci zone — Bobokus Fibo levels color.
switch (OFF) display support and resistance levels — show (hide) support and resistance levels.
switch (OFF) display channels support and resistance — show (hide) support and resistance channels.

\r\n

Customize here the color scheme and the width of lines. Please note the following construction specifics of support and resistance lines. They only appear where trend direction changes, so they are a good assistant in detecting entry/exit points. Also note the \"traces\" of previous channels, which appear as short trendlines on the zigzag tops (bottoms). This indicator provides more you confidence in trade decision making.

", "url": "https://www.mql5.com/en/market/product/11458", "small_icon": "https://c.mql5.com/31/1288/zigzag-on-average-for-mql5-logo-60x60-5788.png", "middle_icon": "https://c.mql5.com/31/1288/zigzag-on-average-for-mql5-logo-140x140-2159.png", "icon": "https://c.mql5.com/31/1288/zigzag-on-average-for-mql5-logo-200x200-7418.png", "rating": 0, "price": 55, "published": 1441197806, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 11406, "title": "Alligator modified", "description": "

The MT5 platform indicator has standard settings and requires no modifications when connected to the chart. Modifying the indicator involves adding two functions:

Marking the area when the indicator lines are in the correct sequence (green line above or below red and blue lines, and red above or below blue). This creates a confirmed cross marked by the closing price to avoid false signals during the Alligator lines' entanglement periods.
Drawing horizontal rays from market structure break levels when the trend theory's postulate is violated.

These functions complement each other, serving as filters for trading signals. Two conditions must be met to identify an entry point: a marked Alligator lines cross and a horizontal line at the market structure break level. On the price chart, the Alligator lines cross and market structure break may occur in different sequences. Having precisely two marked trading signals initiates the search for entry points according to the \"Trading Chaos\" strategy.

The prevailing trend is on a higher timeframe. For example, if the Alligator lines on the daily period are upward, and there's a marked cross of Alligator lines on the left of the chart with a horizontal line at the top of the descending market structure, contrary signals on lower timeframes, indicating a bearish direction, have less significance. They suggest a possible correction in the directional bullish trend of the daily range.

The indicator is part of the \"Trading Chaos\" strategy software suite and is recommended for use with the following software products:

", "url": "https://www.mql5.com/en/market/product/11406", "small_icon": "https://c.mql5.com/31/76/alligator-modified-logo-60x60-5589.png", "middle_icon": "https://c.mql5.com/31/445/alligator-modified-logo-140x140-6038.png", "icon": "https://c.mql5.com/31/76/alligator-modified-logo-200x200-7248.png", "rating": 5, "price": 100, "published": 1441113310, "popularity": 0, "category": "Indicator", "votes": 4 }, { "id": 11344, "title": "Exp5 COPYLOT MASTER for MT5", "description": "

Exp5 - COPYLOT MASTER is a trade copier for МetaТrader 5 and MetaTrader 4. It copies Forex trades from any accounts.

Installation

This Expert Advisor is a master copier. Install the Expert Advisor in the terminal from which you want to copy trades.
Specify any text label name as pathWrite, for example, \"COPY\".
Install COPYLOT MASTER for MT5 on the terminal from which you want to copy trades.
Then install COPYLOT Client MT4 on the MT4 terminal to which you want to copy. Or Copylot Client MT5 for MetaTrader 5

You can also download COPYLOT MASTER for MT4
COPYLOT - Full Description and manual

Note: The list of settings can be found on the Comments tab.

The EA needs to be set to 1 Chart! By default, our adviser copies all positions and orders from your account!

Orders are copied upon their activation (Positions) and copied to the client account.

Partial closing is not supported! Orders can be closed only in the same lots as they were opened! If your master uses different lots for closing, then the copier may fail!

# It is one of the best MT5-to-MT4 trade copiers today.

# The unique copying algorithm exactly copies all trades from the master account to your client account.

# The product is also noted for its high operation speed Tough error handling. A powerful set of features.

# All these qualities are combined in a single program - EXP - COPYLOT.

# The program can be run on multiple terminal bindings.

# Use it as a synchronizer of your trades on various investor accounts trading on one account, - COPYLOT will copy your trades to other terminals.

#tags Copy Копировщик copy trades copy trade copier fast copy kopir, Expforex, Vladon,

Master Settings. From where signals will be copied

pathWrite: Specifies the file path where current positions/orders are saved. Ensure the path has no spaces or special characters. This label is used to link the master and client terminals.

SymbolToCopy: Defines which symbols to copy. If left empty, all symbols will be copied. Multiple symbols can be listed, separated by commas.

SymbolNOtToCopy: Specifies which symbols not to copy. If left empty, all symbols will be copied. Use this field to exclude specific symbols.

typeToCopy: Controls which type of positions to copy. Options: all positions, only BUY, or only SELL.

CommentToTCopy: Copies only positions with a specific comment. If left blank, all positions are copied. Multiple comments can be specified, separated by commas.

CommentToNOTCopy: Prevents copying of positions with specific comments. If left blank, all positions are copied. Multiple comments can be specified, separated by commas.

MagicToCopy: Determines which positions based on a specific magic number will be copied. Multiple magic numbers can be specified, separated by commas.

MagicStartToCopy: Copies positions where the magic number starts with a specific digit. Specify the first digit of the magic numbers.

MagicToNOTCopy: Excludes copying positions with specific magic numbers. Protects against copying on the same account. Use to avoid duplication on the same account.

SLEEPING: Sets the delay in milliseconds between copier executions. The smaller the value, the faster the copying, but it uses more system resources.

ComentShow: Displays a table on the chart with details of current positions that are being copied.

OpenHour/OpenMinute, CloseHour/CloseMinute: Defines the time window during which the copier will operate each day.

STOPbyDD and PercentDDMAX: Stops copying if the drawdown on the master account reaches or exceeds a certain percentage (PercentDDMAX). Useful for avoiding excessive losses.

StartbyDD and PercentDDMIN: Starts copying when the drawdown on the master account exceeds a certain percentage (PercentDDMIN). Used for strategies that benefit from trading during drawdowns.

STOPbyOP and PercentOPMIN: Stops copying when the profit on the master account reaches or exceeds a certain percentage (PercentOPMIN). Prevents further copying when a target profit is achieved.

STARTbyOP and STARTPercentOPMIN: Starts copying when the profit on the master account exceeds a certain percentage (STARTPercentOPMIN).

", "url": "https://www.mql5.com/en/market/product/11344", "small_icon": "https://c.mql5.com/31/1730/exp5-copylot-master-for-mt5-logo-60x60-2790.png", "middle_icon": "https://c.mql5.com/31/1730/exp5-copylot-master-for-mt5-logo-140x140-9495.png", "icon": "https://c.mql5.com/31/1730/exp5-copylot-master-for-mt5-logo-200x200-6001.png", "rating": 4.416666507720947, "price": 0, "published": 1440418001, "popularity": 10.330056290542611, "category": "Utility", "votes": 12 }, { "id": 11099, "title": "FT ROC Histogram", "description": "

The indicator displays the value of ROC (Rate of change) from the selected price or moving average as a histogram. You can plot the moving average ROC values for smoothing indicator.

\r\n

Displayed Data

\r\n

ExtROC - rate of change
ExtMAROC - smoothing line

\r\n

Parameters

\r\n

You can change the price, on which the indicator is calculated.

\r\n

Inputs

\r\n

InpMAPeriod - in case you want to calculate the moving average ROC, enter averaging period. Enter 1 for the calculation of the specified prices.
InpMAMethod - smoothing type (SMA, EMA, LWMA, SMMA).
InpROCPeriod - rate of change period.
InpMAROCPlot - show smoothing line (true/false).
InpMAROCPeriod - averaging period.
InpMAROCMethod - smoothing type (SMA, EMA, LWMA, SMMA).

", "url": "https://www.mql5.com/en/market/product/11099", "small_icon": "https://c.mql5.com/31/74/ft-roc-histogram-logo-60x60-5259.png", "middle_icon": "https://c.mql5.com/31/446/ft-roc-histogram-logo-140x140-3126.png", "icon": "https://c.mql5.com/31/74/ft-roc-histogram-logo-200x200-2382.png", "rating": 3, "price": 0, "published": 1439226209, "popularity": 0.13046690620223167, "category": "Indicator", "votes": 1 }, { "id": 6910, "title": "GARCH Improved Nelder Mead MT5", "description": "

Introduction to GARCH Indicator

GARCH is the short initial for Generalized Autoregressive Conditional Heteroskedasticity and it is the volatility prediction model commonly used in financial industry. GARCH model was first appeared in the work by Danish Economist, Tim Peter Bollerslev in 1986. The 2003 Nobel Prize winner, Robert F Engle also added much contribution for the refinement of GARCH model with Tim’s work. Our GARCH INM predictor took the original method of Nelder Mead for GARCH model building. However, the original Nelder Mead’s method occasionally misses convergence and therefore, we improved the original Nelder Mead method by incorporating intermediate ARMA (Autoregressive Moving Average) step before GARCH step.

How to use GARCH Indicator

The whole purpose of GARCH INM predictor is to improve trading performance. Here are few tips.

Our GARCH INM predictor uses point as basic unit. Therefore, the predicted volatility can provide trader scalable idea on future volatility. For example, if GARCH predicted 1120 point (112 pips) for current candle with 95% confidence interval, then you might expect that there is 95% of chance for current market to stay within the 112 pips range.
Detecting anomaly market is also another important function with GARCH. If price range for current market moved outside the predicted volatility (95% confidence interval), then this is the anomaly event with 5% Probability to occur.
Volatility has very close connection to trend. Increasing volatility often tell you start of trend. Filtering out range market using our GARCH INM predictor, you can aim to enter trend market.

Mathematical Description of GARCH

GARCH INM predictor uses standard GARCH (1, 1) model. Its mathematical description is simply relating the variance of time series to previous variance and previous squared return. In mathematical notation, this would be:

Variance at t = omega + alpha * squared return at t-1 + beta * Variance at t-1

Where time series return y at t = mean + error and t = time

Description for input parameters

NumberOfObs: Number of observations (data point) to be used for calculation. We recommend minimum 1000 data point.
UseHighLow: With use of High-Low mode (true), the range is calculated using high – low. If UseHighLow = false, then close – previous close will be used to calculate range. We recommend using default for your trading.
ConfidenceInterval: Confidence Interval for GARCH prediction. We provide 90%, 95% and 99% confidence interval. This confidence interval provides you probabilistic sense for future market range.
SafetyFactor: Safety Factor is added for extra safety of trading operation. Safety Factor should be greater than 1. If Safety Factor = 1, then the predicted volatility is equal to original GARCH volatility. If Safety Factor = 1.5, then the predicted volatility will have 50% safe margin over the original GARCH volatility.

Some Trading Ideas with GARCH Nelder Mead

User can adjust Safety Factor from 1.0 to 3.0 to work best for your trading. If GARCH prediction envelope does not touch the price at all, then you can decrease the Safety factor. If GARCH prediction envelope touch the price too often, then you can increase the Safety factor. The main idea is to tune the GARCH prediction to pick extreme bullish or bearish shock in the market. In the shock, use the mean reversion style trading to profit.

Trading Strategy Guide

You can find the detaild trading strategy guide about how to use volatility indicator from the link below. We recommend to read this article before using this volatiltiy indicator for your trading.

Guide for Volatility Indicator

In addition, you can find the trading stratgy for Forex.

Guide for Volume Spread Analysis

Guide for Harmonic Pattern Detection Indicator

Guide for Momentum Indicator

Guide for Supply Demand Indicator

Guide for Triangle Pattern, Falling Wedge Pattern, Rising Wedge Pattern and Channel

Guide for Elliott Wave Indicator

Important Note

This is the off the shelf product. Therefore, we do not accept any modification or customization request on this product. In addition, we do not provide any code library or any support for your coding for this product.

", "url": "https://www.mql5.com/en/market/product/6910", "small_icon": "https://c.mql5.com/31/262/garch-improved-nelder-mead-mt5-logo-60x60-6927.png", "middle_icon": "https://c.mql5.com/31/441/garch-improved-nelder-mead-mt5-logo-140x140-4791.png", "icon": "https://c.mql5.com/31/262/garch-improved-nelder-mead-mt5-logo-200x200-7626.png", "rating": 2, "price": 0, "published": 1438784578, "popularity": 0.5239408269369562, "category": "Indicator", "votes": 2 }, { "id": 3304, "title": "Pair Trading Station MT5", "description": "

How to use Pair Trading Station

Pair Trading Station is recommended for H1 time frame and you can use it for any currency pairs. To generate buy and sell signal, follow few steps below to apply Pair Trading Station to your MetaTrader terminal.

When you load Pair Trading Station on your chart, Pair Trading station will assess available historical data in your MetaTrader platforms for each currency pair. On your chart, the amount of historical data available will be displayed for each currency pair at the beginning for your information. The minimum condition for calculation of Pair trading statistics really depends on available historical data. For example, for EURUSD and GBPUSD, MetaTrader Terminal must have matching historical data to calculate pair trading statistics for these pairs. When there is not enough historical data, you can do few things. Firstly you might open charts for that currency pairs and MetaTrader may load some of historical data. Secondly you might use Historical data centre to load the historical data manually.
Secondly, you need to decide the correlation level for Pair Trading Station to generate trading signals. Higher correlation level will give you more accurate trading signal but you might get fewer trading signals. Based on our experience, the correlation must be greater 0.7.
Once you have set the amount of bars to be used in the calculation and the correlation level, it is time to ask your Pair Trading Station to go through intensive calculation to generate trading signals. Just click “Analyze Pair” button to proceed the calculation. The calculation may take from 30 seconds to several minutes. The calculation time mainly depend on two factor including amount of bars to be used and the number of currency pairs in your market watch. If you have already calculated Pair trading statistics quite lately, then you don’t have to go through the intensive calculation again because Pair Trading Station keeps the latest Pair Trading Statistics. To load the latest Pair Trading Statistics, you just need to press “Ctrl”+ J key on your keyboard.

Must Read and Follow

Keep the right amount of symbols in your market watch. Otherwise, it can overload your cpu and memory. Start with 8 important symbols first in market watch, then gradually increase the numbers as you understand the process.

Many traders are not aware of how much historical data is loaded in your charts. In default setting, normally short historical data, pre-set by your broker, is loaded on your charts. To quickly increase historical data in your charts for many currency pairs, in the history centre, you can just download H1 historical data only for fast processing. Once the pair trading statistics is calculated and saved, you don’t have to worry about if your brokers overwrite or delete your historical data because Pair Trading Station will carry on generating signals using the saved information.

Input Variable Description

Bars to scan for calculation: To calculate pair trading statistics, you need to specify how much historical data you are going to use in the calculation. Check the currency pairs with smallest and largest historical data to get some idea of how much historical data is available in your MetaTrader terminal. Then choose good amount of data to calculate pair trading statistics.
Minimum Bars to qualify for calculation: Pair Trading Station will skip calculation if currency pair have less than minimum bars
Minimum Factor to qualify for signal: normally signal is qualified from factor 2 as in z score of standard deviation
Correlation Limit to match pairs: If correlation is too low, then Pair Trading Station will skip the calculation.
Lines Per Column when signal is displayed: This variable will specify how many lines of signal to be displayed per column in your chart
Colour for Medium Strength Signal: Control colour for medium strength signal
Colour for High Strength Signal: Control colour for high strength signal
Colour for Extreme Strength Signal: Control colour for extreme strength signal

Important Note

This product is the off the shelf product in the store. Therefore, we do not take any personal modification or personal customization request. For our products, we do not provide any code library or any support for your coding.

", "url": "https://www.mql5.com/en/market/product/3304", "small_icon": "https://c.mql5.com/31/262/pair-trading-station-mt5-logo-60x60-2485.png", "middle_icon": "https://c.mql5.com/31/446/pair-trading-station-mt5-logo-140x140-2425.png", "icon": "https://c.mql5.com/31/262/pair-trading-station-mt5-logo-200x200-4805.png", "rating": 4, "price": 280, "published": 1438620794, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 10925, "title": "Stochastic MT5 TFs by your choice", "description": "

This indicator is based on the classical oscilator Stochastic and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. Stochastic MT5 indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each Stochastic for every TF and you will have a choice what TFs you want to see.

\r\n

The indicator shows the digital representation of the main line (%K) and the second line (%D).

\r\n

Example for M1

\r\n

TF_M1 = true;
K_Period1 = 5;
D_Period1 = 3;
S_Period1 = 3;
ENUM_MA_METHOD Method1 = MODE_SMA;
ENUM_STO_PRICE Price1 = STO_LOWHIGH;

\r\n

Input parameter:

\r\n

OverboughtLevel = 80;
OversoldLevel = 20;
aColor = clrAqua; - Color for TFs labels;
wColor = clrWhite; - Color for data between OverboughtLevel and OversoldLevel;

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10925", "small_icon": "https://c.mql5.com/31/72/stochastic-mt5-tfs-by-your-choice-logo-60x60-5286.png", "middle_icon": "https://c.mql5.com/31/445/stochastic-mt5-tfs-by-your-choice-logo-140x140-8276.png", "icon": "https://c.mql5.com/31/72/stochastic-mt5-tfs-by-your-choice-logo-200x200-5032.png", "rating": 0, "price": 40, "published": 1438350533, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10784, "title": "PipTick Pairs Cross MT5", "description": "

The Pairs Cross indicator is a unique tool for negatively correlated trading instruments, such as EURUSD and USDCHF currency pairs. It is based on a concept called pairs trading (or spread trading). Our indicator compares the strength of two currency pairs that are inversely correlated and quickly tells you when it’s time to buy the first pair and short a second pair, and vice versa. This is a straightforward approach to trading currency pairs that works very well.

How to you use the Pairs Cross indicator?

There are only two basic ways how to trade with this indicator:

The histogram has changed color from red to green (cross above 0) - BUY Pair 1, SELL Pair 2
The histogram has changed color from green to red (cross below 0) - SELL Pair 1, BUY Pair 2

To increase the success of signals, we also recommend applying some additional filters, such as the Heikin Ashi indicator.

Suitable currency pairs

EURUSD vs. USDCHF
GBPUSD vs. USDCHF
AUDUSD vs. USDCHF
EURUSD vs. USDCAD
AUDUSD vs. USDCAD

Main features

The indicator compares the strength of two inversely correlated currency pairs.
The signal line for entering or exiting the trades.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting (customizable look-back period).
Customizable parameters (Colors, Line thickness, RSI period...).
High-speed calculation.
The indicator works with prefixes and suffixes of symbols as well (EURUSD.m, EURUSD-pro...).
Available for MT4 and MT5.

Please visit the Pairs Cross indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/en/market/product/10784", "small_icon": "https://c.mql5.com/31/771/piptick-pairs-cross-mt5-logo-60x60-1046.png", "middle_icon": "https://c.mql5.com/31/771/piptick-pairs-cross-mt5-logo-140x140-9530.png", "icon": "https://c.mql5.com/31/771/piptick-pairs-cross-mt5-logo-200x200-6066.png", "rating": 0, "price": 99, "published": 1437986059, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10786, "title": "PipTick Pairs Spread MT5", "description": "

The Pairs Spread indicator has been developed for the popular strategy known as pairs trading, spread trading, or statistical arbitrage. This indicator measures the distance (spread) between prices of two directly (positively) correlated instruments and shows the result as a curve with standard deviations. So, traders can quickly identify when the instruments are too far apart and use this information for trade opportunities.

How to use the Pairs Spread indicator

Best results are attained when the trade is opened somewhere between the second and the third standard deviation.

The indicator is between 2nd and 3rd standard deviations - SELL Pair 1, BUY Pair 2.
The indicator is between -2nd and -3rd standard deviations - BUY Pair 1, SELL Pair 2.

Suitable currency pairs

EURUSD vs. GBPUSD
EURUSD vs. NZDUSD
USDCHF vs. USDJPY
AUDUSD vs. GBPUSD
AUDUSD vs. EURUSD

Main features

The indicator shows the deviations from the normal state.
A simple comparison of the actual correlation between two currency pairs.
The second and third standard deviations area for entering the trades.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting (customizable look-back period).
Customizable parameters (Colors, Line thickness, Deviations period...).
High-speed calculation.
The indicator works with prefixes and suffixes of symbols as well (EURUSD.m, EURUSD-pro...).
Available for MT4 and MT5.

Please visit the Pairs Spread indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/en/market/product/10786", "small_icon": "https://c.mql5.com/31/771/piptick-pairs-spread-mt5-logo-60x60-6043.png", "middle_icon": "https://c.mql5.com/31/771/piptick-pairs-spread-mt5-logo-140x140-4427.png", "icon": "https://c.mql5.com/31/771/piptick-pairs-spread-mt5-logo-200x200-9121.png", "rating": 0, "price": 99, "published": 1437986054, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10730, "title": "Multitimeframe Parabolic SAR", "description": "

This indicator is based on the classical indicator Parabolic SAR.

\r\n

You can observe up to 4 different timeframes. All MT5 TimeFrames are supported.

\r\n

It's possible to use lower or higher timeframes than the current chart timeframe.

\r\n

Input Parameters:

\r\n

For each of the 4 Timeframes you can configure:

\r\n

The specific Period (ENUM_TIMEFRAMES)
The\r\n usage of the PSAR Value ("visible and relevant for the signal", \r\n "visible and not relevant for the signal" or "invisible and not relevant\r\n for the signal (ignore)")
PSAR Step
PSAR Maximum

\r\n

Global:

\r\n

Symbol

\r\n \r\n

Output:

\r\n

Signal and PSAR-Values on Chart
Signal (1=all above the price; 2=all below the price; 3=some above and below the price)
Buffers:

PSAR-Value for TF1
PSAR-Value for TF2
PSAR-Value for TF3
PSAR-Value for TF4
Signal

", "url": "https://www.mql5.com/en/market/product/10730", "small_icon": "https://c.mql5.com/31/71/multitimeframe-parabolic-sar-mtf-psar-logo-60x60-1834.png", "middle_icon": "https://c.mql5.com/31/439/multitimeframe-parabolic-sar-logo-140x140-3352.png", "icon": "https://c.mql5.com/31/71/multitimeframe-parabolic-sar-mtf-psar-logo-200x200-6423.png", "rating": 0, "price": 39, "published": 1437746310, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10766, "title": "Trend Monitor MT5", "description": "

The indicator generates early signals basing on ADX reading data combined with elements of price patterns.

Works on all symbols and timeframes.

The indicator does not redraw its signals. You see the same things on history and in real time.

For better visual perception signals are displayed as arrows (in order not to overload the chart).

Features

The best results are obtained when the indicator works on two timeframes. For example: M30 – the indicator shows the main trend; M5 – the indicator generates signals of entry in trend direction determined on M30.
It is recommended to use the indicator during session movements to reduce the likelihood of falling into flat.
Easy to use. Filter configuration only requires selection of sensitivity in the \"Sensitivity of the indicator\" input.
The signal is given not only when the bar is closed (formed signal), but also on the current bar which is not closed yet (probable signal).
The indicator sends emails and push notifications to mobile devices.

You can test the functionality of the program by downloading the test version from the Comments tab

Parameters

----- Parameters ----- (The basic indicator parameters)

Sensitivity of the indicator. Can have the following values:
- High sensitivity (more signals) - good for higher timeframes (H4, D1 and higher).
- Medium sensitivity (optimal signals) - best parameters for M5-H1.
- Low sensitivity (accurate signals) - for M1, M5.
Enable the possible signal (on the current bar) - enable/disable signal on the current incomplete bar (probability signal).
Use signal filter by Moving Average - filter signals using the Moving Average (Disable - no filter, Enable - use filter, Enable and Show filter - use filter and display the MA).
Period of Moving Average - the period of the Moving Average used as a filter.
The averaging Method - the averaging method of the Moving Average used as a filter.

----- Direction of the trend (an arrow in upper right corner) ----- (Color settings of trend direction)

ON/OFF-Draw the arrow of the trend - show/hide a trend arrow in the upper right corner.
Color of Up-trend - the color of the signal arrow for the bullish trend.
Color of Down-trend - the color of the signal arrow for the bearish trend.

----- Messages/Sounds ----- (Notifications and sound settings)

ON/OFF - Sound when the signal - enable/disable sound alert
File name of sound (signal is already generated) - name of the sound file played on already formed signal (close bar)
File name of sound (possible signal) - name of the sound file played on probable signal (current bar)
ON/OFF - Alert - enable/disable in the terminal when signals emerge.
ON/OFF - Mail - sending emails.
ON/OFF - Push - sending push notifications to mobile devices.

----- Misc ----- (Other settings)

Language – language of messages (English or Russian).

You can test the indicator's demo version here

", "url": "https://www.mql5.com/en/market/product/10766", "small_icon": "https://c.mql5.com/31/71/trend-monitor-mt5-logo-60x60-2362.png", "middle_icon": "https://c.mql5.com/31/439/trend-monitor-mt5-logo-140x140-5893.png", "icon": "https://c.mql5.com/31/71/trend-monitor-mt5-logo-200x200-3744.png", "rating": 4.5, "price": 30, "published": 1437746224, "popularity": 3.1818302793734836, "category": "Indicator", "votes": 2 }, { "id": 10756, "title": "Heiken Ashi MT5 Indicator by PipTick", "description": "

The Heikin Ashi indicator is our version of the Heikin Ashi chart. Unlike competitor products, this indicator offers extensive options for calculating Heikin Ashi candles. In addition, it can be displayed as a classic or smoothed version.

The indicator can calculate Heikin Ashi with moving average by four methods:

SMA - Simple Moving Average
SMMA - Smoothed Moving Average
EMA - Exponential Moving Average
LWMA - Linear Weighted Moving Average

Main features

The indicator shows Heikin Ashi as a classic or smoothed version
Excellent tool for simple assessment of the trend
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN)
The indicator is non-repainting
Ready for backtesting
Customizable parameters (Colors, MA periods...)
High-speed calculation
Available for MT4 and MT5

Please visit the Heikin Ashi indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/en/market/product/10756", "small_icon": "https://c.mql5.com/31/775/heiken-ashi-mt5-indicator-by-piptick-logo-60x60-4530.png", "middle_icon": "https://c.mql5.com/31/775/heiken-ashi-mt5-indicator-by-piptick-logo-140x140-3578.png", "icon": "https://c.mql5.com/31/775/heiken-ashi-mt5-indicator-by-piptick-logo-200x200-5728.png", "rating": 4.333333492279053, "price": 0, "published": 1437581095, "popularity": 3.286637094258836, "category": "Indicator", "votes": 3 }, { "id": 10731, "title": "Candle Pattern Finder MT5", "description": "

This indicator searches for candlestick patterns. Its operation principle is based on Candlestick Charting Explained: Timeless Techniques for Trading Stocks and Futures by Gregory L. Morris.

If a pattern is detected, the indicator displays a message at a bar closure.

If you trade using the MetaTrader 4 terminal, then you can download the full analogue of the \"Candle Pattern Finder for MT4\" indicator

It recognizes the following patterns: Bullish/Bearish (possible settings in brackets):

Hammer / Shooting Star (with or without confirmation*)
Inverted Hammer / Hanging Man(with or without confirmation*)
OutSide Bar
Engulfing (high or low sensibility**)
Piercing Line / Dark Cloud Cover (high or low sensibility**)
Three White Soldiers / Identical Three Crows (high or low sensibility**)
Morning Star / Evening Star
Rising Three Methods / Falling Three Methods
Marubozu (including Closing/Opening Marubozu)
Meeting Lines
Harami, including Harami Cross
Doji, including Evening/Morning Doji Star
Thrusting Line

* - \"Without confirmation\" - a signal occurs straight at the closure of the bar that forms the candlestick pattern. \"With confirmation\" - the indicator waits for the next (confirming) bar closure.

** - \"Low sensibility\" - the pattern is recognized in strict conformity with the description from the book by Gregory L. Morris. \"High sensibility\" - uses additional criteria that take into account a variety of pattern options in the Forex market, which are not used on the stock market. This has increased the number of correct signals without increasing the number of false ones.

Features:

The indicator implements virtually all candlestick patterns available for Forex from the book by G. Morris.
The indicator is not tied to the size and shape of candlesticks, since it uses the intellectual recognition technique, which is similar to human perception - patterns are recognized so as a human eye would visually recognize them.
You can choose to recognize separate candlestick patterns. Flexible settings for each pattern.
Three languages are supported: English, Russian and Portuguese (the Language parameter). You can also add names of the candlestick patterns in your mother tongue (send me a private message).
Sound and text notifications of pattern formation. Emails and push notifications to mobile devices (parameters ON/OFF-Mail and ON/OFF-Push).

If you want to scan candlestick patterns for all instruments and timeframes at once, then pay attention to the \"Candle Pattern Dashboard for MT5\" indicator

Parameters:

Parameters of candlestick patterns

Parameters of Hammer and Shooting Star (Disable / Single bar (without confirmation) / Bar with confirmation)
Parameters of Inverted Hammer and Hanging Man (Disable / Single bar (without confirmation) / Bar with confirmation)
Enable OutSide Bar pattern (Disable / Enable)
Parameters of Engulfing pattern (Disable / High sensitivity / Low sensitivity)
Parameters of Cloud pattern (Dark/Piercing Cloud) (Disable / High sensitivity / Low sensitivity)
Parameters of Three White Soldiers/Identical Crows (Disable / High sensitivity / Low sensitivity)
Enable Morning Star and Evening Star (Disable / Enable)
Enable Rising/Falling Three Methods (Disable / Enable)
Enable Marubozu (including Closing/Opening Marubozu) (Disable / Enable)
Enable Meeting Lines pattern (Disable / Enable)
Enable Harami pattern (Disable / Harami shadows can walk out of shadows of a prev.candle / Harami shadows can not go beyond the shadow of the prev.candle)
Doji patterns (Disable / Single Doji candle (without confirmation) / Doji candle with confirmation (is Morning/Evening Doji Star)
Thrusting Line

Alerts, E-mail, Push-messages
Color Settings

Other Settings

Show Pattern Description

Write signals to a log-file - enable writing signals to a file

Name of the log-file

You can test the functionality of the program by downloading the test version from the Comments tab

", "url": "https://www.mql5.com/en/market/product/10731", "small_icon": "https://c.mql5.com/31/71/candle-pattern-finder-mt5-logo-60x60-5329.png", "middle_icon": "https://c.mql5.com/31/446/candle-pattern-finder-mt5-logo-140x140-5936.png", "icon": "https://c.mql5.com/31/71/candle-pattern-finder-mt5-logo-200x200-5194.png", "rating": 4.199999809265137, "price": 30, "published": 1437576003, "popularity": 0.37556461728378776, "category": "Indicator", "votes": 5 }, { "id": 10726, "title": "PipTick Currency Index MT5", "description": "

The Currency Index indicator enables traders to display any index of eight major currencies. It uses a special calculation that considers specific currency pairs and their weights.

The default weights are based on the BIS Triennial Central Bank Survey results. Because of this advantage, the trader can see each currency's true strength and weakness.

Note: If the indicator is used in Strategy Tester (demo version), please keep in mind that all currency pairs' data must be downloaded in History Center before the simulation starts (How-to). If the indicator is added to the chart in the usual way, no downloads are needed.

Currency Indexes

USDX - US Dollar Currency Index.
EURX - Euro Currency Index.
GBPX - British Pound Currency Index.
CHFX - Swiss Franc Currency Index.
CADX - Canadian Dollar Currency Index.
JPYX - Japanese Yen Currency Index.
AUDX - Australian Dollar Currency Index.
NZDX - New Zealand Dollar Currency Index.

Main Features

The indicator shows the index of eight major currencies (USD, EUR, GBP, CHF, JPY, CAD, AUD, NZD).
A simple comparison of the strength and weakness of one currency.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
The indicator is non-repainting.
Ready for backtesting.
Customizable parameters (Colors, Line thickness, Weights).
High-speed calculation.
The indicator works with prefixes and suffixes of symbols as well (EURUSD.m, EURUSD-pro...).
Available for MT4 and MT5.

Please visit the Currency Index indicator product page for the input and output parameters settings.

", "url": "https://www.mql5.com/en/market/product/10726", "small_icon": "https://c.mql5.com/31/771/piptick-currency-index-mt5-logo-60x60-9017.png", "middle_icon": "https://c.mql5.com/31/771/piptick-currency-index-mt5-logo-140x140-5119.png", "icon": "https://c.mql5.com/31/771/piptick-currency-index-mt5-logo-200x200-7219.png", "rating": 1, "price": 99, "published": 1437575576, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 10722, "title": "Average Directional Index MT5 TF by your choice", "description": "

This indicator is based on the classical indicator Average Directional Index (ADX) and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. ADX MT5 indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each ADX for every TF and you will have a choice what TF you want to see.

\r\n

Example for M1

\r\n

TF_M1 = true;
adxPeriod1 = 14;

\r\n

Input parameter:

\r\n

aColor = clrAqua; - Color for TFs labels;
gColor = clrGreen; - Color for \"/\\\";
rColor = clrRed; - Color for \"\\/\";
wColor = clrWhite; - Color for \"=\" ( when Plus Directional Indicator (+DI) = Minus Directional Indicator (-DI) ).

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10722", "small_icon": "https://c.mql5.com/31/71/average-directional-index-mt5-tf-by-your-choice-logo-60x60-9361.png", "middle_icon": "https://c.mql5.com/31/440/average-directional-index-mt5-tf-by-your-choice-logo-140x140-9014.png", "icon": "https://c.mql5.com/31/71/average-directional-index-mt5-tf-by-your-choice-logo-200x200-3940.png", "rating": 0, "price": 40, "published": 1437497419, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10298, "title": "PZ Pivot Points MT5", "description": "

This indicator displays pivot points in the chart, including historical vales, and supports many calculation modes for Pivot Points and S/R levels.

[ Installation Guide | Update Guide | Troubleshooting | FAQ | All Products ]

It plots historical levels for backtesting purposes
It allows you to select the reference timeframe
It implements different Pivot Point calculation modes
It implements different SR calculation modes
It implements customizable colors and sizes

Calculation Modes

The indicator implements different calculation modes for the pivot point.

(H+L+C)/3
(H+L+O)/3
(H+L+C+O)/4
(H+L+C+C)/4
(H+L+O+O)/4
(H+L)/2
(H+C)/2
(L+C)/2

It also implements many different calculation modes for SR Levels:

Classic Formula
- R4 = R3 + (High – Low)
- R3 = R2 + (High – Low)
- R2 = PP + (High – Low)
- R1 = (2 * PP) – Low
- S1 = (2 * PP) – High
- S2 = PP – (High – Low)
- S3 = S2 – (High – Low)
- S4 = S3 – (High – Low)
Woodie Pivot Points
- R4 = R3 + (High – Low)
- R3 = High + 2 * (PP – Low)
- R2 = PP + (High – Low)
- R1 = (2 * PP) – Low
- S1 = (2 * PP) – HIGH
- S2 = PP – (High – Low)
- S3 = Low – 2 * (High – PP)
- S4 = S3 – (High – Low)
Camarilla Pivot Points
- R4 = PP + (High – Low) * 1.1/2
- R3 = PP + (High – Low) * 1.1/4
- R2 = PP + (High – Low) * 1.1/6
- R1 = PP + (High – Low) * 1.1/12
- S1 = PP – (High – Low) * 1.1/12
- S2 = PP – (High – Low) * 1.1/6
- S3 = PP – (High – Low) * 1.1/4
- S4 = PP – (High – Low) * 1.1/2

Input Parameters

PP Calculation Mode: Select the Pivot Points calculation mode desired
S/R Calculation Mode: Select the SR calculation mode desired
Timeframe: Choose the timeframe to calculate pivot points from
Mid Points: Display or hide mid points between SR levels
Color of S levels: Color of support levels
Color of R levels: Color of resistance levels
Color of P level: Color of pivot point levels
Font size: Font size for name and price labels

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/en/market/product/10298", "small_icon": "https://c.mql5.com/31/68/pz-pivot-points-mt5-logo-60x60-3739.png", "middle_icon": "https://c.mql5.com/31/445/pz-pivot-points-mt5-logo-140x140-8188.png", "icon": "https://c.mql5.com/31/68/pz-pivot-points-mt5-logo-200x200-4591.png", "rating": 4.909090995788574, "price": 0, "published": 1437497397, "popularity": 2.2049836520305743, "category": "Indicator", "votes": 22 }, { "id": 10714, "title": "VR Watch list and Linker MT5", "description": "

VR Watch list and Linker is a screener application for the MetaTrader terminal. Makes it easier to find the most interesting and technical financial instruments. This screener is used by traders for trading on such exchanges as bybit, Moscow Exchange, American Exchange, foreign exchange and cryptocurrencies market, metal market, and is used for trading in prop companies. The selection of financial instruments is carried out manually. The screener connects open charts in the MetaTrader terminal and, when changing a financial instrument, shows the data in each chart separately.

Settings, set files, demo versions, instructions, problem solving, can be found in [blog]
You can read or write reviews at [link]
Version for [MetaTrader 4]

Using a screener helps traders find the most technical financial instruments and exclude trading on instruments with low liquidity and high risk. The screener allows you to easily and quickly create and change sheets with tickers, quickly add and remove tickers in sheets. Save and load trader markups and indicators on all charts. Trade financial instruments directly from the screener. Apply pre-prepared strategies.

VR Watch list and Linker - supports working with hot keys - this allows you to work with the sheet directly from the keyboard, practically without using the mouse. Thanks to this approach, a trader can select a dozen financial instruments for trading during the day.

The screener is designed as an advisor and requires several open charts to work.

Doesn't work in the strategy tester.

Features of the VR Watch list and Linker screener

View a list of financial instruments using the keyboard or mouse
Adding and importing tickers from other screeners like Finviz
Creating sheets with different sets of financial instruments
Automatic saving of trader markup and its subsequent loading
Create and apply analytical strategies without losing data
Trading financial instruments directly from the screener
Sorting financial instruments according to different criteria
Outputting standard information or information from indicators
Working with homework based on the lessons of A. Gerchik

Recommended Add-ons

Indicator synchronizer of levels and markings VR Synck Chart [MetaTrader 4] [MetaTrader 5]

Screener settings

Colum settings - Column settings

Update time colum (Milli Seconds) - Time to update column data
Value column one - Data in the first column
Value column two - Data in the second column
Smoothness (Milli Seconds) - Smoothness of the screener
Double-click to delete - Protection against accidental ticker deletion

Indicator settings - Indicator settings

Time Frame indicator - Indicator calculation period
Period indicator - Indicator period
Custom indicator name 1 Colum - Indicator name in the first column
Custom indicator buffer 1 Colum - Number of the indicator buffer in the first column
Custom indicator digits 1 Colum - Number of decimal places in indicator values
Custom indicator name 2 Colum - Indicator name in the first column
Custom indicator buffer 2 Colum - Number of the indicator buffer in the first column
Custom indicator digits 2 Colum - Number of decimal places in indicator values

Sound settings - Indicator sound settings

Sound - Turn on/off sound

Trade settings - Trade settings

Magic Number - Unique number of trading orders
Slippage - Slippage for trading orders

Theme settings - Screener color scheme settings

Window size - Size of screener elements
Text size - Text size in the screener
Theme color (skin) - Preset color scheme
Selected item color - Color of the active element
Background color - Background color
Stroke color - Element edging color
Text color - Text color
Up color - Color of elements to increase
Equality Color - Color of elements without changing the value
Dw color - Color of elements for reduction

Hotkeys:

Hot keys work only when the window in which the screener is running is active - the selected window. If another window is selected, the hotkeys do not work.

Do not use the [Backspace] key - it may cause the program to crash.

List of hotkeys:

Basic hotkeys:

Esc - Closes/Disables all additional subwindows and functions.
A - Move the cursor to the left (Arrow to the left)
S - Move the cursor down (Arrow down)
W - Move the cursor to the top (Up Arrow)
D - Move the cursor to the right (Arrow to the right)
Enter - Confirm selection
Delete - Delete the selected item
Home - Move to the beginning of the list of financial instruments
End - Move to the end of the list of financial instruments

Working with templates:

Q - Forced saving of chart templates. It has the highest priority and works regardless of the buttons for auto-saving templates and strategy numbers.
~ (tilde) - Enable/Disable automatic saving of chart templates.
1 - Enables/Disables the strategy saved under number 1
2 - Enables/Disables the strategy saved under number 2
3 - Enables/Disables the strategy saved under number 3

Working with tickers:

T - Activate ticker input field
Delete - Delete the last character printed. (DO NOT USE [Backspace] KEY)
I - Open it import tickers

Working with sorting:

R - Open sort menu

Working with sheets:

E - Quickly add a ticker to a previously created sheet
X - List of sheets with the ability to create a new sheet
Z - Apply previous sheet
C - Apply next sheet

Tags:

bybit screener, crypto screener, pump screener, screener, screener bot, watchlist screener, free screeners, free cryptocurrency screener, crypto screener, best screeners, scalpstation screener, scalpstation cryptocurrency screener, download screener, screener, screener for scalping, scalpstation screener, screener stocks, Moscow Exchange stock screener, Russian market stock screener, bot screener, chart screener, cryptocurrency screener, bybit cryptocurrency screener, crypto screener, Moscow Exchange screener, bond screener, Russian bond screener, volume screener, cryptocurrency volume screener, open interest screener, screener application, Russian screener, Russian stock screener, Russian market screener, Finam screener, screeners for scalping cryptocurrencies, market screeners, automatic stock trading, types of stock portfolios, return on a stock portfolio, investment portfolio of stocks, what stocks are in the portfolio, selection of a stock portfolio, investors' stock portfolios, stock portfolio, bond stock portfolio, Tinkoff stock portfolio, dividend stock portfolio, stock selection program, stock trading robot, stock exchange trading robots, stock trading market, stock selection service, stock screener, MICEX stock screener , Moscow Exchange stock screener, Russian market stock screener, US stock screener, Russian stock screener, Tinkoff stock screeners, smartlab stocks, building a stock portfolio, stock trading, stock trading in which markets, stock trading for beginners, stock trading on the stock exchange, portfolio building shares

", "url": "https://www.mql5.com/en/market/product/10714", "small_icon": "https://c.mql5.com/31/1062/vr-watch-list-and-linker-mt5-logo-60x60-3970.png", "middle_icon": "https://c.mql5.com/31/1062/vr-watch-list-and-linker-mt5-logo-140x140-7143.png", "icon": "https://c.mql5.com/31/1062/vr-watch-list-and-linker-mt5-logo-200x200-7061.png", "rating": 4.875, "price": 30, "published": 1437483303, "popularity": 0.4556221993511631, "category": "Utility", "votes": 8 }, { "id": 10633, "title": "Correlation Matrix MT5 Indicator by PipTick", "description": "

The Correlation Matrix indicator shows the actual correlation between the selected instruments. The default setting is set to 28 currency pairs, gold, and silver, but the indicator can compare any other symbols.

Interpretation of the indicator

Positive correlation (correlation is above 80 %).
Negative correlation (correlation is below -80 %).
Weak or no correlation (correlation is between -80 and 80 %).

Main features

The indicator shows the actual correlation between the selected instruments.
A simple comparison of one symbol against another.
Works on every timeframe (M1, M5, M15, M30, H1, H4, D1, W1, MN).
Customizable parameters (Colors, Correlation Period, Symbols...).
High-speed calculation.
The indicator works with prefixes and suffixes of symbols as well (EURUSD.m, EURUSD-pro...).
Available for MT4 and MT5.

Please visit the Correlation Matrix product page for the input and output parameters settings.

", "url": "https://www.mql5.com/en/market/product/10633", "small_icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-60x60-7582.png", "middle_icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-140x140-3121.png", "icon": "https://c.mql5.com/31/771/correlation-matrix-mt5-indicator-by-piptick-logo-200x200-3998.png", "rating": 0, "price": 39, "published": 1436969034, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10617, "title": "Parabolic SAR all MT5 Time Frames by your choice", "description": "

This indicator is based on the classical indicator Parabolic SAR and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. All MT5 TimeFrames PSAR indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each PSAR for every TF and you will have a choice what TFs you want to see.

\r\n

Example for M1

\r\n

TF_M1 = true;
pStep1 = 0.02;
pMax1 = 0.2;

\r\n

Input parameter:

\r\n

aColor = clrAqua; - Color for TFs labels
gColor = clrGreen; - Color for \"/\\\"
rColor = clrRed; - Color for \"\\/\"

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10617", "small_icon": "https://c.mql5.com/31/70/parabolic-sar-all-mt5-time-frames-by-your-choice-logo-60x60-7825.png", "middle_icon": "https://c.mql5.com/31/440/parabolic-sar-all-mt5-time-frames-by-your-choice-logo-140x140-2702.png", "icon": "https://c.mql5.com/31/70/parabolic-sar-all-mt5-time-frames-by-your-choice-logo-200x200-5310.png", "rating": 0, "price": 40, "published": 1436965855, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10571, "title": "Moving Averages all MT5 Time Frames by your choice", "description": "

Many indicators are based on the classical indicator Moving Average.

\r\n

The indicator All_MT5_MA_FX shows the correlation between 2 MA (fast and slow) from each MT5 TimeFrames.

\r\n

You will be able to change main input parameters for each MA for every TF.

\r\n

Example for M1 TF:

\r\n

TF_M1 = true
Period1_Fast = 5
Method1_Fast = MODE_EMA
Price1_Fast = PRICE_CLOSE
Period1_Slow = 21
Method1_Slow = MODE_SMA
Price1_Slow = PRICE_TYPICAL

", "url": "https://www.mql5.com/en/market/product/10571", "small_icon": "https://c.mql5.com/31/70/moving-averages-all-mt5-time-frames-by-your-choice-logo-60x60-2018.png", "middle_icon": "https://c.mql5.com/31/440/moving-averages-all-mt5-time-frames-by-your-choice-logo-140x140-3391.png", "icon": "https://c.mql5.com/31/70/moving-averages-all-mt5-time-frames-by-your-choice-logo-200x200-7124.png", "rating": 0, "price": 40, "published": 1436808503, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10493, "title": "RSI all MT5 TimeFrames by your choice", "description": "

This indicator is based on the classical indicator RSI (Relative Strength Index) and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. All MT5 TimeFrames RSI indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each RSI for every TF and you will have a choice what TFs you want to see.

\r\n

Example for M1

\r\n

TF_M1 = true;
Period1 = 13;
Price1 = PRICE_CLOSE.

\r\n

Input parameters:

\r\n

OverboughtLevel = 70; - Overbought Level (all TFs) for RSI
OversoldLevel = 30; - Oversold Level (all TFs) for RSI
aColor = clrAqua; - Color for TFs labels
wColor = clrWhite; - Color for digital RSI values
gColor = clrGreen;
rColor = clrRed

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10493", "small_icon": "https://c.mql5.com/31/69/rsi-all-mt5-timeframes-by-your-choice-logo-60x60-9258.png", "middle_icon": "https://c.mql5.com/31/442/rsi-all-mt5-timeframes-by-your-choice-logo-140x140-9674.png", "icon": "https://c.mql5.com/31/69/rsi-all-mt5-timeframes-by-your-choice-logo-200x200-2589.png", "rating": 0, "price": 50, "published": 1436456623, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10464, "title": "All MT5 TimeFrames ADX", "description": "

This indicator is based on the classical indicator ADX (Average Directional Index) and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. All MT5 TimeFrames ADX indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, and MN1.

\r\n

You will be able to change the main input parameters for each ADX for every TF.

\r\n

Example for M1

\r\n

sTF1___ = \"M1\";
adxPeriod1 = 14;

\r\n

Input parameter:

\r\n

aColor = clrAqua; - Color for TFs labels

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10464", "small_icon": "https://c.mql5.com/31/69/all-mt5-timeframes-adx-logo-60x60-5194.png", "middle_icon": "https://c.mql5.com/31/441/all-mt5-timeframes-adx-logo-140x140-4309.png", "icon": "https://c.mql5.com/31/69/all-mt5-timeframes-adx-logo-200x200-7241.png", "rating": 0, "price": 40, "published": 1436375036, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10431, "title": "All MT5 TimeFrames PSAR", "description": "

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each CCI for every TF.

\r\n

Example for M1

\r\n

sTF1___ = \"M1\";
pStep1 = 0.02;
pMax1 = 0.2;

\r\n

Input parameter:

\r\n

aColor = clrAqua; - Color for TFs labels

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10431", "small_icon": "https://c.mql5.com/31/69/all-mt5-timeframes-psar-logo-60x60-2795.png", "middle_icon": "https://c.mql5.com/31/447/all-mt5-timeframes-psar-logo-140x140-2100.png", "icon": "https://c.mql5.com/31/69/all-mt5-timeframes-psar-logo-200x200-9615.png", "rating": 0, "price": 30, "published": 1436279140, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10366, "title": "PZ Market Depth MT5", "description": "

Do you like scalping? This indicator displays information about the latest price quotes received from the broker.

[ Installation Guide | Update Guide | Troubleshooting | FAQ | All Products ]

Identify tick trends easily
A blue row means the price has increased
A red row means the price has decreased
Customizable colors and font sizes
Display your desired amount of rows
The indicator is non-repainting

Parameters

Rows: amount of rows with data to display in the chart
Font size: font size of the tick data displayed in the chart
Font bold: made the font bold or regular
Row height ratio: height of the rows displayed in the chart
Bullish color: color of upticks
Bearish color: color of downticks
Border color: color of rows borders
Neutral color: color for a row that has the same tick as last quote
Transparency: From 0 to 255, makes rows transparent

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/en/market/product/10366", "small_icon": "https://c.mql5.com/31/70/pz-market-depth-mt5-logo-60x60-6459.png", "middle_icon": "https://c.mql5.com/31/445/pz-market-depth-mt5-logo-140x140-2633.png", "icon": "https://c.mql5.com/31/70/pz-market-depth-mt5-logo-200x200-2908.png", "rating": 0, "price": 0, "published": 1435851925, "popularity": 0.27208630986813975, "category": "Indicator", "votes": 0 }, { "id": 3920, "title": "PZ ABCD Retracement MT5", "description": "

Identify precise entry and exit points with AB=CD patterns

This indicator finds AB=CD retracement patterns. The AB=CD Retracement pattern is a 4-point price structure where the initial price segment is partially retraced and followed by an equidistant move from the completion of the pullback, and is the basic foundation for all harmonic patterns.

[ Installation Guide | Update Guide | Troubleshooting | FAQ | All Products ]

Customizable pattern sizes
Customizable AC and BD ratios
Customizable breakout periods
Customizable lines, colors and sizes
It displays SL and TP levels based on CD fibo levels
Visual/sound/push/mail alerts for patterns and breakouts

AB=CD Retracements can expand and repaint quite a bit. To make things easier this indicator implements a twist: it waits for a donchian breakout in the right direction before signaling the trade. The end result is an otherwise repainting indicator with a very reliable trading signal. The donchian breakout period is entered as an input.

Bullish retracements are blue
Bearish retracements are red

Kindly note that price patterns such as AB=CD can expand and the indicator must repaint to follow the expansion of the pattern. If the pattern repaints beyond the AC/BD/AB=CD ratios entered in the parameters, the pattern will dissapear as it won't be valid any more. To trade these patterns, please resort to the donchian breakout signal.

Input Parameters

Amplitude: Size of the AB=CD patterns to be found
Breakout Period: Donchian breakout period to time signals
Max History Bars: Amount of bars to look back when the indicator loads
Min AC: Minimum AC ratio of the pattern
Max AC: Maximum AC ratio of the pattern
Min BD: Minimum BD ratio of the pattern
Max BD: Maximum BD ratio of the pattern
AB = CD: Enable or disable the AB = CD condition
Display Options: Display or hide labels, ratios and SL/TP levels
Patterns: Select colors and sizes for the lines forming the pattern
Labels: Select colors and sizes of the A,B,C,D labels
Ratios and SL: Select colors and font-size for ratios and SL/TP labels
Alert on breakouts: Enable to receive alerts when a pattern is found
Alert on patterns: Enable to receive alerts when a breakout happens and arrows show up
Alert settings: Enable or disable visual, push, email and sound alerts

Technical Details

The indicator is evaluated every bar, not every tick.
The last point of the pattern repaints as the pattern expands.
You can have several indicators on the chart with different amplitudes.
An alert is displayed when the pattern forms and also when the breakout takes place.
A small percentage of trading signals can repaint. You can increase the breakout period.

Author

Arturo López Pérez, private investor and speculator, software engineer and founder of Point Zero Trading Solutions.

", "url": "https://www.mql5.com/en/market/product/3920", "small_icon": "https://c.mql5.com/31/23/pz-abcd-retracement-mt5-logo-60x60-6812.png", "middle_icon": "https://c.mql5.com/31/439/pz-abcd-retracement-mt5-logo-140x140-5137.png", "icon": "https://c.mql5.com/31/23/pz-abcd-retracement-mt5-logo-200x200-9603.png", "rating": 0, "price": 75, "published": 1435672080, "popularity": 3.067212571301388, "category": "Indicator", "votes": 0 }, { "id": 10308, "title": "All MT5 TimeFrames CCI", "description": "

This indicator is based on the classical indicator CCI (Commodity Channel Index) and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. All MT5 TimeFrames CCI indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each CCI for every TF.

\r\n\r\n

\r\n

Example for M1

\r\n

sTF1___ = \"M1\";
Period1 = 13;
Price1 = PRICE_CLOSE.

\r\n\r\n

\r\n

Input parameters

\r\n

OverboughtLevel = 100; - Overbought Level (all TFs) for CCI
OversoldLevel = -100; - Oversold Level (all TFs) for CCI
aColor = clrAqua; - Color for TFs labels
wColor = clrWhite; - Color for digital CCI values

\r\n\r\n

\r\n

Note

\r\n

When you change currency pair for the opened chart you have to wait couple second (Next Tick)for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10308", "small_icon": "https://c.mql5.com/31/68/all-mt5-timeframes-cci-logo-60x60-7721.png", "middle_icon": "https://c.mql5.com/31/438/all-mt5-timeframes-cci-logo-140x140-6998.png", "icon": "https://c.mql5.com/31/68/all-mt5-timeframes-cci-logo-200x200-7404.png", "rating": 0, "price": 40, "published": 1435596433, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10327, "title": "All MT5 TimeFrames Stochastic", "description": "

This indicator is based on the classical indicator Stochastic and will be helpful for those who love and know how to use not a visual but digital representation of the indicator. All MT5 TimeFrames Stochastic indicator shows values from each time frames:

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each Indicator for every TF.

\r\n

First line of data is representing a Main calculations of the Stochastic

\r\n

Second line of data is representing a Signal calculations of the Stochastic.

\r\n\r\n

\r\n

Example for M1

\r\n

sTF1____ = \"M1\";
K_Period1 = 5;
D_Period1 = 3;
S_Period1 = 3;
Method1 = MODE_SMA;
iPrice1 = STO_LOWHIGH;

\r\n\r\n

\r\n

Input parameters

\r\n

OverboughtLevel = 80; - Overbought Level (all TFs) for Stochastic
OversoldLevel = 20; - Oversold Level (all TFs) for Stochastic
aColor = clrAqua; - Color for TFs labels
wColor = clrWhite; - Color for digital Stochastic values

\r\n\r\n

\r\n

Note:

\r\n

When you change currency pair for the opened chart you have to wait couple second (next tick) for recalculation.
Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10327", "small_icon": "https://c.mql5.com/31/68/all-mt5-timeframes-stochastic-logo-60x60-1783.png", "middle_icon": "https://c.mql5.com/31/446/all-mt5-timeframes-stochastic-logo-140x140-4193.png", "icon": "https://c.mql5.com/31/68/all-mt5-timeframes-stochastic-logo-200x200-1273.png", "rating": 0, "price": 40, "published": 1435596428, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10297, "title": "Buy Sell Color Background", "description": "

The Buy Sell Color Background indicator changes the background color depending on position direction.

It has three settings:

Background color for BUY - background color for a Buy position
Background color for SELL - background color for a Sell position
Default background color - background color with no open position

After you detach the indicator from a chart, its background color changes to Default background color.

", "url": "https://www.mql5.com/en/market/product/10297", "small_icon": "https://c.mql5.com/31/68/buy-sell-color-background-logo-60x60-1170.png", "middle_icon": "https://c.mql5.com/31/439/buy-sell-color-background-logo-140x140-8921.png", "icon": "https://c.mql5.com/31/68/buy-sell-color-background-logo-200x200-5386.png", "rating": 0, "price": 34, "published": 1435596364, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 10277, "title": "All MT5 TimeFrames RSI", "description": "

\r\n

M1, M2, M3, M4, M5, M6, M10, M12, M15, M20, M30, H1, H2, H3, H4, H6, H8, H12, D1, W1, AND MN1.

\r\n

You will be able to change the main input parameters for each RSI for every TF.

\r\n\r\n

\r\n

Example for M1

\r\n

sTF1___ = \"M1\";
Period1 = 13;
Price1 = PRICE_CLOSE.

\r\n\r\n

\r\n

Input parameters

\r\n

OverboughtLevel = 70; - Overbought Level (all TFs) for RSI
OversoldLevel = 30; - Oversold Level (all TFs) for RSI
aColor = clrAqua; - Color for TFs labels
wColor = clrWhite; - Color for digital RSI values

\r\n\r\n

\r\n

Note

\r\n

1. When you change currency pair for the opened chart you have to wait couple second for recalculation.
2. Before using this indicator you have to open all charts (all TFs) for the current currency pairs.

", "url": "https://www.mql5.com/en/market/product/10277", "small_icon": "https://c.mql5.com/31/68/all-mt5-timeframes-rsi-logo-60x60-6531.png", "middle_icon": "https://c.mql5.com/31/445/all-mt5-timeframes-rsi-logo-140x140-5734.png", "icon": "https://c.mql5.com/31/68/all-mt5-timeframes-rsi-logo-200x200-4592.png", "rating": 0, "price": 40, "published": 1435324454, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 10203, "title": "VR Grid Mt5", "description": "

The VR Grid indicator is designed to create a graphical grid with user-defined settings. Unlike the standard grid, VR Grid is used to build circular levels. Depending on the user's choice, the step between the round levels can be arbitrary. In addition, unlike other indicators and utilities, VR Grid maintains the position of the grid even when the time period changes or the terminal is rebooted.

You can find settings, set files, demo versions, instructions, problem solving, at [blog]
You can read or write reviews at [link]
Version for [MetaTrader 4]

Vertical levels are based on actual time intervals and ignore missing or non-existent periods. Thus, the step between levels strictly corresponds to the value selected by the user.

When using the VR Grid indicator, a trader can change the style, color and thickness of vertical and horizontal lines at any level. This allows you to control the round levels of a financial instrument.

Round levels are those prices that end with two or more zeros (for example: 1.23500, 5.65900, 1923.200). It is believed that such levels often act as strong points of support or resistance.

Horizontal line settings

Horizontal line step
Horizontal line color
Horizontal line style
Horizontal line Width

Vertical line settings

Vertical line period step
Period for step calculation
Vertical line color
Vertical line style
Vertical line Width

Other settings

Button size
Prefix object

", "url": "https://www.mql5.com/en/market/product/10203", "small_icon": "https://c.mql5.com/31/1101/vr-grid-mt5-logo-60x60-2695.png", "middle_icon": "https://c.mql5.com/31/1101/vr-grid-mt5-logo-140x140-4540.png", "icon": "https://c.mql5.com/31/1101/vr-grid-mt5-logo-200x200-6875.png", "rating": 3.25, "price": 0, "published": 1435054792, "popularity": 1.8325997632402524, "category": "Indicator", "votes": 8 }, { "id": 10148, "title": "XCalper Didi index", "description": "

This indicator and its usage was developed by Brazilian trader and analyst Odir Andrade Aguiar (nickname Didi) from Doji Star.

\r\n

Usage

\r\n

It is based on the ratio of moving averages with periods 3 (FAST) and 20 (SLOW) by the 8-period moving, which are default settings.

\r\n

When SLOW and FAST are very close and near 1.0-line (white center line), they can indicate a buy or sell signal in next candles. Such signal is know as Agulhada (Needleful).

\r\n

Buy entry happens when FAST line moves UP while SLOW line moves DOWN with increasing volume, after signal.
Sell entry happens when SLOW line moves UP while FAST line moves DOWN with increasing volume, after signal.

\r\n

It is important to mention that:

\r\n

references should only be used to start the trade. Other indicators must be used to exit the trade;
signals work best when stock/futures has high volume and liquidity.

", "url": "https://www.mql5.com/en/market/product/10148", "small_icon": "https://c.mql5.com/31/66/xcalper-didi-index-logo-60x60-8481.png", "middle_icon": "https://c.mql5.com/31/445/xcalper-didi-index-logo-140x140-6709.png", "icon": "https://c.mql5.com/31/66/xcalper-didi-index-logo-200x200-1768.png", "rating": 5, "price": 30, "published": 1434559429, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 10098, "title": "Fast Polynom moving average and channel", "description": "

A useful and convenient tool for traders when analyzing and making decisions.

Peculiarity

The main feature of this indicator is its fast algorithm.
The gain in the speed of calculating the polynomial and its value of the standard deviation in comparison with classical algorithms reaches several thousand times.
Also, this indicator includes a Strategy Tester with a clear visualization of transactions, an equity chart and simultaneous calculation and display of the following data in the form of a table:

profit (in points)
maximum drawdown (in points)
total number of transactions
profit Factor (total profit / total loss)
stability (total profit / maximum drawdown)

Built-in tester

20 strategies are given as an example: 5 channel and 5 non-channel, as well as their inverse strategies (when Sell and Buy are swapped).
A brief description of the strategies can be seen by hovering the mouse pointer over the line in the tables of the corresponding strategy.
You can further expand the capabilities of this Tester by applying this indicator to another indicator, for example, RSI.
It is especially worth noting the possibility of changing the parameters in two ways:

using the keyboard and mouse (control keys can be viewed by selecting \"Help\" in the menu)
using sliders and switches in the control menu

Language support has been implemented (so far 8 languages). The language is set automatically according to the selected language in the terminal, but you can also change the language with the \"L\" (Language) key.
Text fields can be dragged with the mouse.

Indicator lines

Yellow lines - Polynomial channel is redrawn with each tick. The green dashed lines are the extrapolation of the Polynomial to the future.
Two-colour lines - non-redrawable channel, which is a trace from the Yellow Polynomial, Blue - when the lines of the Polynomial are directed up, Violet- when down.
Red line - Sell, Blue line - Buy. Displayed when the Tester is on.

Parameters

Degree of a polynomial - degree of the polynomial, from 0 to 20

0 - regular MA (Bollinger Bands channel)
1 - linear regression
2 - nonlinear regression without inflection points (parabola)
3 - nonlinear regression with one inflection point (wave)
etcetera

Number of bars for the calculation (period) - number of bars for calculation (period).
Width of the channel, 0-no channel, 1-width = standard deviation - Channel width:

0 - do not draw the channel
1 - the width is equal to the standard deviation of the polynomial

Bars to extrapolate in the future - how many bars to extrapolate into the future
Show Polynom? - if true, then show the Polynomial line (yellow line)
Spread for Tester - the size of the spread for the Tester
Notify channel trend change - enable notifications (push notifications to the phone and a pop-up window) in case of a change in the trend of the Polynomial channel (orange color). This is equivalent to changing the color of a two-color line.
Allow all notifications for tester mode - Enable/disable permission to use all downstream notifications
Send Alert Notification - Enable text notification of a buy and sell signal according to the selected strategy from the strategy tester
Send Sound Notification - Enable Sound notification of a new buy and sell signal according to the selected strategy from the strategy tester
Send Push-Notification to Mobile - Send PUSH notifications to your phone (requires setting in your terminal Tools -> Options-> Notifications -> MetaQuotes ID) about buy and sell signals according to the selected strategy from the strategy tester

Notifications

You can configure notifications to be sent: text notification in a separate window, sound notification and push notifications to the phone.
These notifications are sent in case of a new buy or sell signal in accordance with the selected strategy in the tester. If the tester is disabled, then notifications will not be generated.
Signals are sent when the red and blue dotted lines change color.

Recommendations

The degree of the Polynomial is limited to 20. But this is very redundant.
In my opinion, it is quite enough to use this indicator with a Polynomial degree less than 10.
My recommendation for trading is to use the 2nd degree of the polynomial (parabolic channel), but for cryptocurrencies, the 3rd degree of the polynomial, in my opinion, is better due to the strong volatility.

", "url": "https://www.mql5.com/en/market/product/10098", "small_icon": "https://c.mql5.com/31/66/fast-polynomial-moving-average-and-channel-logo-60x60-7238.png", "middle_icon": "https://c.mql5.com/31/445/fast-polynom-moving-average-and-channel-logo-140x140-8332.png", "icon": "https://c.mql5.com/31/66/fast-polynomial-moving-average-and-channel-logo-200x200-5050.png", "rating": 5, "price": 84, "published": 1434544930, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 9994, "title": "Milky Way MT5", "description": "

The indicator MilkyWay is calculating and draws a blue or red ribbon as a trend and as a filter.

\r\n

In case the price is moving inside the ribbon you should not enter the market.

\r\n

In case you see a blue trend and the current price is above the blue ribbon than this is a good time to go Long.

\r\n

In case you see a red trend and the current price is below the red ribbon than this is a good time to go Short.

\r\n

Only 1 input parameter: nBars = 500; - number of Bars where the ribbon will appears.

", "url": "https://www.mql5.com/en/market/product/9994", "small_icon": "https://c.mql5.com/31/65/milky-way-mt5-logo-60x60-8932.png", "middle_icon": "https://c.mql5.com/31/446/milky-way-mt5-logo-140x140-8736.png", "icon": "https://c.mql5.com/31/65/milky-way-mt5-logo-200x200-8785.png", "rating": 0, "price": 40, "published": 1433786903, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9911, "title": "Smart Renko MT5", "description": "

Introduction to Smart Renko

The main characteristics of Renko Charting concern price movement. To give you some idea on its working principle, Renko chart is constructed by placing a brick over or below when the price make the movement beyond a predefined range, called brick height. Therefore, naturally one can see clear price movement with less noise than other charting type. Renko charting can provide much clearer trend direction and it helps to identify important support and resistance level more clearly. As Renko charting does not use time, original Renko charting have some difficulties to be used together with other technical indicators. Especially backtesting of your strategy using typical Renko charting is very difficult and time consuming. However, we brought Smart Renko Chart here. Smart Renko overcomes the limitation of traditional Renko charting and it brings you many other benefits for your efficient trading.

Main Features of Smart Renko

You can use any timeframe to calculate your Renko bricks including M1 and M5.
Smart Renko will show you generally agreeable trend movement towards all timeframe.
You can display spread view of Renko bricks on your main chart allowing you to backtest with other technical indicators.
You can cross reference between the Renko bricks on your main chart and Renko bricks on your indicator chart. (Simply just double click on your main chart or indicator chart. You will see reference lines on both charts.)
Smart Renko includes automatic brick height calculation using Standard Deviation and Z value. Therefore even a starter can use this Smart Renko Indicator.
Smart Renko will indicate the future brick level for buy and sell bricks in advance.

Some Note on Smart Renko

Smart Renko must be used together with other indicator. You can use it with many built-in technical indicators successfully, such as MACD, RSI or Stoch, Moving Average to construct your trading strategy.
Line chart is preferred with Smart Renko. Therefore, in default setting, Smart Renko uses line chart. However, you can always switch off the line chart and use candlestick chart.
Renko chart should be calculated using M1 data. You can choose M1 timeframe for its calculation with Smart Renko. However, most brokers have short historical data for M1 timeframe. Therefore, default timeframe for calculation is M5 timeframe.
It is possible to draw bricks on entire historical data. This may slow down your trading terminal.
For Brick Height Mode = 1, Smart Renko will use Standard deviation to calculate brick height automatically. Use the common Z value sensibly such as 1.0, 1.68, 1.96, etc. for profitable trading.
For Brick Height Mode = 0, you can input any brick height in pips. Smart Renko will use your input to construct the Renko Chart.
Hit R key on your keyboard When Smart Renko does not load automatically at start up. This happens due to initial data loading on sub-timeframe (M1, M5, etc.) of current timeframe.
Smart Renko uses sub-timeframe (M1 or M5) for brick calculation and it displays bricks on the current timeframe. Do not use weekly or monthly chart. M1 or M5 timeframe mostly does not have sufficient data to draw Renko brick on weekly and monthly chart.

Trading Strategy Guide

You can use Smart Renko together with any of following technical analysis.

Guide for Volume Spread Analysis

Guide for Harmonic Pattern Detection Indicator

Guide for Momentum Indicator

Guide for Supply Demand Indicator

Guide for Triangle Pattern, Falling Wedge Pattern, Rising Wedge Pattern and Channel

Guide for Elliott Wave Indicator

Important Note

", "url": "https://www.mql5.com/en/market/product/9911", "small_icon": "https://c.mql5.com/31/262/smart-renko-mt5-logo-60x60-1825.png", "middle_icon": "https://c.mql5.com/31/447/smart-renko-mt5-logo-140x140-8205.png", "icon": "https://c.mql5.com/31/262/smart-renko-mt5-logo-200x200-5816.png", "rating": 0, "price": 80, "published": 1433781915, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9595, "title": "Pivot Points MT5", "description": "

Pivot Points MT5 is a universal color multicurrency/multisymbol indicator of the Pivot Points levels systems. You can select one of its three versions: Standard Old, Standard New and Fibo. It plots pivot levels for financial instruments in a separate window.

\r\n

The system will automatically calculate the Pivot Point on the basis of market data for the previous day (PERIOD_D1) and the system of support and resistance levels, three in each.

\r\n

A user can choose colors for the indicator lines.

\r\n

The only difference between Standard New and Standard Old versions is the method of calculation of the third level of support (S3) and resistance (R3).

\r\n

Inputs

\r\n

Calculation Method - the Pivot Points calculation method:

Standard Old.
Standard New.
Fibonacci.

Bars Number - number of bars to be displayed in a separate window.
Currency Name - name of the financial instrument.
Color of Bid Line - color of the Bid line.
Color of Level R3 - color of the R3 resistance line.
Color of Level R2 - color of the R2 resistance line.
Color of Level R1 - color of the R1 resistance line.
Color of Level P - color of the pivot point.
Color of Level S1 - color of the S1 support line.
Color of Level S2 - color of the S2 support line.
Color of Level S3 - color of the S3 support line.
Print Messages - permission for logging messages.

\r\n

Before operation of the indicator updating of historical data on financial instruments is required!

", "url": "https://www.mql5.com/en/market/product/9595", "small_icon": "https://c.mql5.com/31/62/pivot-points-mt5-logo-60x60-8631.png", "middle_icon": "https://c.mql5.com/31/445/pivot-points-mt5-logo-140x140-5135.png", "icon": "https://c.mql5.com/31/62/pivot-points-mt5-logo-200x200-4755.png", "rating": 0, "price": 30, "published": 1433430670, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9942, "title": "All Pending Orders with StopLoss MT5", "description": "

All Pending Orders with StopLoss opens any combination of Buy Stop, Sell Stop, Buy Limit and Sell Limit pending orders and closes all existing pending orders.

\r\n

If boolSL = true then this Script will calculate one common StopLoss value as the StopLoss for a first/last orders and put this value in all pending orders.

\r\n\r\n

\r\n

Input Parameters

\r\n

Before placing all pending orders, the input window is opened allowing you to modify all input parameters:

\r\n

DeleteAllPendings: if true, then all pending orders (for the current currency) will be deleted. (No pending orders will be created!).
Order_Type: you can choose what kind of pending orders you want to use (Buy Stop, Sell Stop, Buy Limit or Sell Limit).
boolSL: if true, then StopLoss will be placed for each position.
Stop_Loss.
InitLot: initial lot size.
LotCoeff: if 1, then all pending orders will have the same lot size.
InitStep: difference between two consecutive orders in points.
StepCoeff: if 1, then distance between all positions will be the same.
NumOfOrders: number of pending orders you want to place on the chart.

\r\n\r\n

\r\n

Attention

\r\n

If DeleteAllPendings = true, then the Script will delete all existing pending orders for the current currency pair only.
You have to allow automated trading on the \"Expert Advisors\" tab (Tools->Options).

", "url": "https://www.mql5.com/en/market/product/9942", "small_icon": "https://c.mql5.com/31/65/all-pending-orders-with-stoploss-mt5-logo-60x60-4041.png", "middle_icon": "https://c.mql5.com/31/446/all-pending-orders-with-stoploss-mt5-logo-140x140-9848.png", "icon": "https://c.mql5.com/31/65/all-pending-orders-with-stoploss-mt5-logo-200x200-8155.png", "rating": 0, "price": 50, "published": 1433427199, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 9905, "title": "VolumeDeltaMT5", "description": "

This indicator provides the analysis of tick volume deltas. It calculates tick volumes for buys and sells separately, and their delta on every bar, and displays volumes by price clusters (cells) within a specified bar (usually the latest one).

\r\n

This is a limited substitution of market delta analysis based on real volumes, which are not available on Forex.

\r\n

The indicator displays the following data in its sub-window:

\r\n

light-blue histogram - buy (long) volumes;
orange histogram - sell (short) volumes;
light green histogram - delta between buys and sells;
green line - cumulative delta, EMA of delta; its values are multiplied by CumulativePeriod for scale adjustment - this makes it approximately the same size as the histograms;
blue and red arrows - mark those bars where volume direction contradicts price direction, that may be considered as a signal;

\r\n

Also, the indicator displays a table of split volumes for the current bar in the main window. The current bar is selected by means of yellow dotted vertical line (drag it to the required position). The table rows correspond to price clusters. The table contains the following columns:

\r\n

price (a range of prices from specified value up to the next range);
sell volume;
delta of buy and sell volumes (positives are blue, negatives are red);
buy volume;
total volume (cells with values near the maximum one are highlighted in green).

\r\n

Parameters

\r\n

PointsPerCell - number of points forming a single price cluster; every cluster is shown as a row in a table with split volumes of current bar (this is a kind of \"Time and Sales\" feed); default value - 10;
LastBars - number of bars for calculation; default - 1000; 0 means all bars;
CumulativePeriod - period for calculation of cumulative delta by EMA; default - 12;
StickToBar0 - enable/disable special mode, when the yellow dotted vertical line is always bound to the latest bar, which effectively makes it current all the time; default - false;
Corner - corner of the main window to display the table; default value - top right corner;
CellWidth - width of the table cells; default - 40;
CellHeight - height of the table cells; default - 15;
ColorBG - table background color; default - black;
FontSize - table font size; default - 7;
HideTable - if true, the table with split volumes is not shown; default - true;
HideMark - if true, the price label on the maximum volume level is not shown; default - true; when both HideTable and HideMark are true, the vertical line for selecting the analyzed bar is not shown as well;
HideBuySell - an option to hide columns for Buy and Sell volumes in the table, as well as corresponding histograms (false by default);
UseRealVolumes - allows you to enable calculations using real volumes (when set to true), false by default.

\r\n

Supported timeframes: M5 and higher.

\r\n

After initial placement on a chart it may take some time for indicator to download M1 data, and its lines may be shown as incomplete. Please wait until the indicator finishes its automatic updates.

", "url": "https://www.mql5.com/en/market/product/9905", "small_icon": "https://c.mql5.com/31/64/volumedeltamt5-logo-60x60-1477.png", "middle_icon": "https://c.mql5.com/31/441/volumedeltamt5-logo-140x140-4505.png", "icon": "https://c.mql5.com/31/64/volumedeltamt5-logo-200x200-7711.png", "rating": 0, "price": 25, "published": 1433406437, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9829, "title": "XCalper CandleTimer", "description": "

This auxiliary indicator displays time left before closing on the current timeframe with continuous update.

\r\n

It also shows the last trade price and variation from a previous day close in percentage and points.

\r\n

This indicator is pretty handy for daytraders and scalpers who want to precisely monitor closing and opening of candles.

\r\n

Indicator parameters

\r\n

Show in shifted end - Default: False. Display time and values on screen. If True, Displays only time to close aside last candle.
Distance from the right margin - Default: 40. Distance, in pixels, from right margin for on screen information.
Color of the label - Default: Yellow. Color of time counter.
Font family of the label - Default: Arial. Font family of time counter.
Size of the label font - Default: 10. Font size of the time counter.

", "url": "https://www.mql5.com/en/market/product/9829", "small_icon": "https://c.mql5.com/31/64/xcalper-candletimer-logo-60x60-6483.png", "middle_icon": "https://c.mql5.com/31/442/xcalper-candletimer-logo-140x140-7604.png", "icon": "https://c.mql5.com/31/64/xcalper-candletimer-logo-200x200-9161.png", "rating": 4.642857074737549, "price": 0, "published": 1432903869, "popularity": 1.5491530479168634, "category": "Indicator", "votes": 14 }, { "id": 8990, "title": "Heiken", "description": "

Heiken professional Expert Advisor partially follows the market using i-Heiken_Ashi indicator (see the screenshot). At each i-Heiken_Ashi signal, a position is opened in its direction. Each newly opened position is automatically accompanied by a stop loss, break even, trailing stop and take profit.

\r\n

In order to diversify the funds efficiently, it is recommended using the multicurrency operation mode, at which 10 currencies are selected, while the risk is reduced 10 times. The EA processes errors correctly and works reliably in the market. You can setup both an audio signal and, for instance, sending a signal as an email. The signal indicator does not redraw. I recommend testing this EA with a broker providing five-digit quotes, or even better on the MetaQuotes-Demo server.

\r\n

Parameters:

\r\n

Work Period - Expert Advisor's working period.
Risk - risk value, at which the market entry is performed (loss value compared with the overall deposit in percentage). The lot is defined relative to the stop loss and allowable losses when reaching it.
LotRounding - lot rounding (up to decimal places).
Deviation - requotes.
Sleeps - waiting for position being opened, closed or modified.
Withdraw - virtual profit withdrawal (in percetnage), 0 - disabled.
ShowIndicators - display the indicator.
StopLoss - stop loss.
TakeProfit - take profit.
Trailing Period - trailing stop period.
Trailing Breakeven - breakeven level. 0 - disabled.
Trailing Start - trailing start level. 0 - disabled.
Trailing Stop - trailing stop level. 0 - disabled.
TrailingStep Period - trailing stop period.
Prohibit new series - if you need to close the current position and stop opening new ones, enable this option.
WorkOpenLong - allow opening a long position.
WorkOpenShort - allow opening a short position.
WorkCloseLong - allow closing a long position.
WorkCloseShort - allow closing a short position.
Inversion - input signal inversion.
SignalBar - bar, from which the indicator tracking starts (1 - the first fully formed bar).
PeriodHeiken - indicator period.
OnMA1 - allow using the first additional moving average.
PeriodMA1 - MA1 period.
LengthMA1 - amount of MA1 bars.
MethodMA1 - MA1 calculation method.
AppliedPriceMA1 - apply MA1 to the price.
ShiftMA1 - MA1 shift.
InversionSignalMA1 - MA1 inversion.
OnMA2 - allow using the second additional moving average.
PeriodMA2 - MA2 period.
LengthMA2 - amount of MA2 bars.
MethodMA2 - MA2 calculation method.
AppliedPriceMA2 - apply MA2 to the price.
ShiftMA2 - MA2 shift.
InversionSignalMA2 - MA2 inversion.
alert - audio signal.
push - notification for mobile terminals.
email - send a signal status via email.

", "url": "https://www.mql5.com/en/market/product/8990", "small_icon": "https://c.mql5.com/31/61/heiken-logo-60x60-7788.png", "middle_icon": "https://c.mql5.com/31/440/heiken-logo-140x140-2938.png", "icon": "https://c.mql5.com/31/61/heiken-logo-200x200-2092.png", "rating": 0, "price": 90, "published": 1431952140, "popularity": 0, "category": "Expert", "votes": 0 }, { "id": 9356, "title": "Market Noise Reduction Hourly Indicator MT5", "description": "

This indicator is designed for H1 and H4 timeframes (TF) only.

\r\n

No input parameters because it is tuned to these two TF.

\r\n

It draws two step-like lines: a main Silver line and a signal Red line.

\r\n

These two lines are calculated so that to enhance the filtration of the market noise.

\r\n

Buy when the main line goes above the signal line.

\r\n

Sell when the main line goes below the signal line.

", "url": "https://www.mql5.com/en/market/product/9356", "small_icon": "https://c.mql5.com/31/60/market-noise-reduction-hourly-in-logo-60x60-3350.png", "middle_icon": "https://c.mql5.com/31/440/market-noise-reduction-hourly-indicator-mt5-logo-140x140-8807.png", "icon": "https://c.mql5.com/31/60/market-noise-reduction-hourly-in-logo-200x200-6997.png", "rating": 0, "price": 50, "published": 1430847762, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9349, "title": "Bear Bull Wave", "description": "

This indicator works on every currency pairs and time frames (TF).

\r\n

One input parameter: nPeriod - number of bars for histogram calculation.

\r\n

I recommend to optimize nPeriod value for each TF.

\r\n

If Green histogram poles are crossing the zero line from below then Long position may be opened.

\r\n

If Red histogram poles are crossing the zero line from above then Long position may be opened.

", "url": "https://www.mql5.com/en/market/product/9349", "small_icon": "https://c.mql5.com/31/60/bear-bull-wave-logo-60x60-6949.png", "middle_icon": "https://c.mql5.com/31/440/bear-bull-wave-logo-140x140-8265.png", "icon": "https://c.mql5.com/31/60/bear-bull-wave-logo-200x200-9627.png", "rating": 0, "price": 30, "published": 1430820372, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9269, "title": "Pending Orders Grid Drag and Drop MT5", "description": "

Pending Orders Grid Complete System opens any combination of Buy Stop, Sell Stop, Buy Limit and Sell Limit pending orders and closes all existing pending orders.

\r\n

You will be able to Drag-and-Drop the Script on the chart and it will pick up the start price for the first position in the grid from the \"Drop\" point. Usually it should be in the area of Support/Resistance lines.

\r\n\r\n

\r\n

Input Parameters

\r\n

Before placing all pending orders, the input window is opened allowing you to modify all input parameters:

\r\n

DeleteAllPendings - if true, then all pending orders (for the current currency) will be deleted. (No pending orders will be created!);
Order_Type - you can choose what kind of pending orders you want to use (Buy Stop, Sell Stop, Buy Limit or Sell Limit);
InitLotSize - initial lot size;
LotCoeff - if 1, all pending orders will have the same lot size;
NumOfOrders - number of pending orders you want to place on the chart;

\r\n\r\n

\r\n

Attention

\r\n

If DeleteAllPendings=true, then the script will be able to delete existing pending orders for the current currency pair only.
You have to allow automated trading on the \"Expert Advisors\" tab (Tools->Options).
You must drop the script on a legitimate Starting Price area on the chart for the first position in the grid. Comment will appear in the left upper corner of the chart if the Price is not right or too close to the current price: \"StartingPrice is not correct\".

", "url": "https://www.mql5.com/en/market/product/9269", "small_icon": "https://c.mql5.com/31/59/pending-orders-grid-drag-and-dro-logo-60x60-6314.png", "middle_icon": "https://c.mql5.com/31/447/pending-orders-grid-drag-and-drop-mt5-logo-140x140-7860.png", "icon": "https://c.mql5.com/31/59/pending-orders-grid-drag-and-dro-logo-200x200-6209.png", "rating": 0, "price": 50, "published": 1430144702, "popularity": 0, "category": "Utility", "votes": 0 }, { "id": 9253, "title": "All Time Frames CCI RSI Stochastic", "description": "

This indicator is based on the classical indicators: RSI (Relative Strength Index), CCI (Commodity Channel Index) and Stochastic. It will be helpful for those who love and know how to use the digital representation of the indicators. The indicator shows values from each timeframe (M1, M5, M15, M30, H1, H4, D1, W1 and MN1).

\r\n

You will be able to change the main input parameters for each RSI, CCI and Stochastic for every timeframe.

\r\n\r\n

\r\n

Parameters

\r\n

OverboughtLevel_R = 70 - RSI UpLevel
OversoldLevel_R = 30 - RSI DownLevel
OverboughtLevel_C = 100 - CCI UpLevel
OversoldLevel_C = -100 - CCI DownLevel
OverboughtLevel_S = 80 - Stochastic UpLevel
OversoldLevel_S = 20 - Stochastic DownLevel

\r\n

Example for M1:

\r\n

Period1 = 13 - period for CCI and RSI
Price1 = PRICE_CLOSE - apply price for CCI and RSI
K_Period1 = 5 - first period for Stochastic
D_Period1 = 3 - second period for Stochastic
S_Period1 = 3 - slowing period for Stochastic
Method1 = MODE_SMA - MA method for Stochastic

", "url": "https://www.mql5.com/en/market/product/9253", "small_icon": "https://c.mql5.com/31/59/all-time-frames-cci-rsi-stochast-logo-60x60-8525.png", "middle_icon": "https://c.mql5.com/31/438/all-time-frames-cci-rsi-stochastic-logo-140x140-7978.png", "icon": "https://c.mql5.com/31/59/all-time-frames-cci-rsi-stochast-logo-200x200-3984.png", "rating": 0, "price": 40, "published": 1429886957, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9122, "title": "Two Fibonacci lines with Buy and Sell arrows MT5", "description": "

Fibonacci sequence is defined by integer sequence: 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, ...

\r\n

By definition, it starts from 0 and 1, the next number is calculated as a sum of two previous numbers.

\r\n

Instead of the standard moving average, the indicator uses the following calculation of average price: Bar0 + Bar1 + Bar2 + Bar3 + Bar5 + Bar8 + Bar13 + Bar21 + ...

\r\n

This indicator shows 2 moving Fibonacci lines and arrows when 2 these lines crossing each other.

\r\n

If an Aqua line is crossing a Yellow line from below then an Aqua arrow appears. This is an indication of an Uptrend.

\r\n

If an Aqua line is crossing a Yellow line from above then a Yellow arrow appears. This is an indication of a Downtrend.

\r\n

Input parameters

\r\n

FiboNumPeriod_1 - numbers in the following integer sequence for Fibo Moving Average 1.
nAppliedPrice_1 - applied price.
FiboNumPeriod_2 - numbers in the following integer sequence for Fibo Moving Average 2.
nAppliedPrice_2 - applied price.

\r\n

The indicator will show lines and arrows for first 500 bars (starting from current bar).

", "url": "https://www.mql5.com/en/market/product/9122", "small_icon": "https://c.mql5.com/31/58/two-fibonacci-lines-with-buy-and-logo-60x60-7971.png", "middle_icon": "https://c.mql5.com/31/439/two-fibonacci-lines-with-buy-and-sell-arrows-mt5-logo-140x140-9132.png", "icon": "https://c.mql5.com/31/58/two-fibonacci-lines-with-buy-and-logo-200x200-8863.png", "rating": 0, "price": 50, "published": 1429632431, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9146, "title": "Nine Lives of DeMarker MT5", "description": "

DeMarker (DeM) indicator is another member of the Oscillator family \r\nof technical indicators. Traders use the index to determine overbought \r\nand oversold conditions, assess risk levels, and time when price \r\nexhaustion is imminent.

\r\n

This indicator shows DeMarker data from 9 currency pairs of your choice for all 9 timeframes.

\r\n

If a digital value of DeM is less or equal to DnLevel = 0.3 \r\n(or whatever number you decided to put), Green square appears. This is \r\npotentially an oversold condition and may be a good time to go Long.

\r\n

If a digital value of DeM is greater or equal to UpLevel = 0.7\r\n (or whatever number you decided to put), Red square appears. This is \r\npotentially an overbought condition and may be a good time to go Short.

\r\n

If a digital value of DeM is between UpLevel and DnLevel, Gray square appears.

\r\n\r\n

\r\n

Input Parameters

\r\n

From Symb1 to Symb9 - you may change any of this parameter to any legal currency pair present at your platform.
dPeriod = 14 - averaging period for the DeM.
UpLevel = 0.7 - overbought level.
DnLevel = 0.3 - oversold level.
SymbColor = clrWhite - you may change the color of all labels.

", "url": "https://www.mql5.com/en/market/product/9146", "small_icon": "https://c.mql5.com/31/58/nine-lives-of-demarker-mt5-logo-60x60-2199.png", "middle_icon": "https://c.mql5.com/31/442/nine-lives-of-demarker-mt5-logo-140x140-1202.png", "icon": "https://c.mql5.com/31/58/nine-lives-of-demarker-mt5-logo-200x200-4288.png", "rating": 0, "price": 40, "published": 1429545252, "popularity": 0, "category": "Indicator", "votes": 0 }, { "id": 9102, "title": "Currency Power Meter Linear MT5", "description": "

This is a linear indicator of a currency power having the ability to filter by smoothing values. It shows the current power of selected currencies (the maximum number is 8), as well as historical values. Calculation depends on the selected chart timeframe the indicator is launched at.

The indicator displays data as lines for all currencies or as a histogram for the current currency pair. The intersection of the currency strength indices for the current currency pair is additionally displayed as arrows on the chart. The current trend direction is highlighted by the coloring of the bars.

Main settings:

iPeriod - number of bars used to analyze currency power.
HistoryBars - number of calculated bars on history. The parameter affects execution time during the first launch. It is also necessary for reducing the necessary history data in case a broker has limitation on history length.
SmoothingPeriod - data smoothing period (to enable smoothing, set to 1).
SmoothingMethod - data smoothing method.
ShowPairLabels - enable/disable display labels with names of currencies in the left part of the indicator window.
LabelsFontSize - currency label font size.
ShowRatio1-8 - currency name to be displayed.
UsePairs - list of symbols for currency power calculation.
PairPreffix - additional prefix of currency pairs. For example, in EURUSD.e symbol, \".e\" is a prefix.
ShowWarningComments - enable/disable comments on the operation errors, for example, the absence of symbol quotes or insufficient symbol history length at a broker's side.

", "url": "https://www.mql5.com/en/market/product/9102", "small_icon": "https://c.mql5.com/31/58/currency-power-meter-linear-mt5-logo-60x60-2154.png", "middle_icon": "https://c.mql5.com/31/441/currency-power-meter-linear-mt5-logo-140x140-2385.png", "icon": "https://c.mql5.com/31/58/currency-power-meter-linear-mt5-logo-200x200-8230.png", "rating": 5, "price": 35, "published": 1429286689, "popularity": 0, "category": "Indicator", "votes": 1 }, { "id": 9027, "title": "Trigger Bands MT5", "description": "

This indicator shows bands (flexible corridor) for a current price movement and the change of trend. The indicator can be used on any time frames and currency pairs.

\r\n

The following input parameters can be easily changed for your needs:

\r\n

nPeriod = 13; - number of bars which the indicator will use for calculation
Deviation = 1.618; - coefficient for bands distance from the middle line
MaShift = 0; - shift from current bar

", "url": "https://www.mql5.com/en/market/product/9027", "small_icon": "https://c.mql5.com/31/58/trigger-bands-mt5-logo-60x60-7506.png", "middle_icon": "https://c.mql5.com/31/446/trigger-bands-mt5-logo-140x140-4647.png", "icon": "https://c.mql5.com/31/58/trigger-bands-mt5-logo-200x200-9156.png", "rating": 0, "price": 40, "published": 1429031180, "popularity": 0, "category": "Indicator", "votes": 0 } ], "total": 26588 }

Forex Market of trading robots, indicators and trading applications

Price

Deep Moving Average

FlatLevels

Trend modified for mql5

Wolfe waves modified for mql5

Info about candles

Candle Pips MT5

Price Break MT5

XCalper TFO

Trend Trade mt5

Turning point of price mt5

ZigZag Medvedev for MQL5

ZigZag Medvedev Close for MQL5

Bober Real MT5

Prise Reversal mt5

VR Ticks MT5

Price Statistics MT5

BuyLimit and SellLimit MQ5 buttons

BoxProfile MT5

Normalized OBV

Exp COPYLOT CLIENT for MT5

BoxChart MT5

Five Candles Pattern MT5

Color Candles Bulls and Bears

KVM Bitcoin Price Ticker MT5

Color Chart MT5

ZigZag on average for MQL5

Alligator modified

Exp5 COPYLOT MASTER for MT5

FT ROC Histogram

GARCH Improved Nelder Mead MT5

Pair Trading Station MT5

Stochastic MT5 TFs by your choice

PipTick Pairs Cross MT5

PipTick Pairs Spread MT5

Multitimeframe Parabolic SAR

Trend Monitor MT5

Heiken Ashi MT5 Indicator by PipTick

Candle Pattern Finder MT5

PipTick Currency Index MT5

Average Directional Index MT5 TF by your choice

PZ Pivot Points MT5

VR Watch list and Linker MT5

Correlation Matrix MT5 Indicator by PipTick

Parabolic SAR all MT5 Time Frames by your choice

Moving Averages all MT5 Time Frames by your choice

RSI all MT5 TimeFrames by your choice

All MT5 TimeFrames ADX

All MT5 TimeFrames PSAR

PZ Market Depth MT5

PZ ABCD Retracement MT5

All MT5 TimeFrames CCI

All MT5 TimeFrames Stochastic

Buy Sell Color Background

All MT5 TimeFrames RSI

VR Grid Mt5

XCalper Didi index

Fast Polynom moving average and channel

Milky Way MT5

Smart Renko MT5

Pivot Points MT5

All Pending Orders with StopLoss MT5

VolumeDeltaMT5

XCalper CandleTimer

Heiken

Market Noise Reduction Hourly Indicator MT5

Bear Bull Wave

Pending Orders Grid Drag and Drop MT5

All Time Frames CCI RSI Stochastic

Two Fibonacci lines with Buy and Sell arrows MT5

Nine Lives of DeMarker MT5

Currency Power Meter Linear MT5

Trigger Bands MT5